| | |
|---|
| 2020 | Active and Passive Optical Fiber Metrology for Detonation Velocity Measurements
Quaresma, Joana; Deimling, Lukas; Campos, Jose; Mendes, Ricardo | Journal Article |
| 2020 | Anionic Polymerization of ε-Caprolactam under the Influence of Water: 2. Kinetic Model
Wendel, Rainer; Rosenberg, Philipp; Wilhelm, Michael; Henning, Frank | Journal Article |
| 2020 | Aspects of electron transfer processes in vanadium redox-flow batteries
Roznyatovskaya, Nataliya; Noack, Jens; Pinkwart, Karsten; Tübke, Jens | Journal Article |
| 2020 | Beitrag zur Kristallisationsoptimierung von Poly(L-Lactid) (PLLA) und Grundlagen zur Validierung einer Methode zur Inline-Charakterisierung des Kristallisationsverlaufs im Spritzgießprozess
Moser, Kevin | Dissertation |
| 2020 | Characterization of influencing parameters in the robot-based filament winding process on a skeleton structure with thermoset pre-impregnated carbon fiber tows
Duan, Jinmin
: Henning, Frank (Supervisor); Wilhelm, Michael (Supervisor) | Master Thesis |
| 2020 | Compensation of Water Influence on Anionic Polymerization of ε-Caprolactam: 1. Chemistry and Experiments
Wilhelm, Michael; Wendel, Rainer; Aust, Martin; Rosenberg, Philipp; Henning, Frank | Journal Article |
| 2020 | Corona - Mechanistik, Kinetik, Modellierung, Simulation und Vorhersage des Verlaufs in Deutschland
Schmid, Helmut | Presentation |
| 2020 | Decomposition of ammonium dinitramide (ADN) elucidated by quantum chemical computations
Lang, Johannes; Bohn, Manfred | Conference Paper |
| 2020 | Development of flow fields for zinc slurry air flow batteries
Choi, N.H; Olmo, D. del; Fischer, Peter; Pinkwart, Karsten; Tübke, Jens | Journal Article |
| 2020 | Evaluating Current Distribution and Influence of Defect Sites for Graphitic Compound Bipolar Plate Materials
Baumann, Nils; Blankenship, A.; Dorn, M.; Cremers, Carsten | Journal Article |
| 2020 | Funktionalisierung aromatischer Diamine aus dem chemischen PUR-Recycling
Springsklee, Lukas | Master Thesis |
| 2020 | Handbuch Leichtbau. Methoden, Werkstoffe, Fertigung. 2., überarbeitete und erweiterte Auflage
: Henning, Frank; Möller, Elvira | Book |
| 2020 | Implications of Testing a Zinc-Oxygen Battery with Zinc Foil Anode Revealed by Operando Gas Analysis
Dongmo, Saustin; Stock, Daniel; Jakob, Julian; Kreissl, Alexander; Groß, Martin; Weixler, Sophie; Hagen, Markus; Miyazaki, Kohei; Abe, T.; Schröder, D. | Journal Article |
| 2020 | Influence of the Temperature on Coccolith-Containing Systems from Emiliania huxleyi Cultivations
Chairopoulou, Makrina Artemis; Kratzer, Fabian; Gross, Roland; Herrmann, Michael; Teipel, Ulrich | Journal Article |
| 2020 | Jet Dispersion of Multiwall Carbon Nanotubes and Correlation with Suspension Rheology
Dresel Alexander; Teipel, Ulrich | Journal Article |
| 2020 | Konzeptionierung und Analyse eines langfaserverstärkten Getriebedeckels für ein Elektrofahrzeug
Zeller, Tobias | Master Thesis |
| 2020 | Mechanistic Insights into the Lithiation and Delithiation of Iron-Doped Zinc Oxide: The Nucleation Site Model
Asenbauer, Jakob; Hoefling, Alexander; Indris, Sylvio; Tübke, Jens; Passerini, Stefano; Bresser, Dominic | Journal Article |
| 2020 | Messtechnische Charakterisierung und dynamische Simulation von Kunststoffbauteilen
Georgi, Tom; Troge, Jan; Kranz, Burkhard; Diemert, Jan | Conference Paper |
| 2020 | Mikrowellenpyrolyse von carbonfaserhaltigen Kunststoffen als Recyclingoption
Seiler, Elisa; Urban, Helfried; Teipel, Ulrich | Journal Article |
| 2020 | A novel approach for segmenting and mapping of local fiber orientation of continuous fiber-reinforced composite laminates based on volumetric images
Schöttl, L.; Dörr, D.; Pinter, P.; Weidenmann, K.A.; Elsner, Peter; Kärger, L. | Journal Article |
| 2020 | A novel model predictive control scheme based observer for working conditions and reconditioning monitoring of Zinc-Nickel single flow batteries
Li, Shawn; Li, Kang; Xiao, Evan; Xiong, Rui; Zhang, Jianhua; Fischer, Peter | Journal Article |
| 2020 | Novel SERS-based process analysis for label-free segmented flow screenings
Mendl, Alexander; Köhler, Michael; Bošković, Dušan; Löbbecke, Stefan | Journal Article |
| 2020 | Organische Sulfide und Disulfide von s-Triazin und s-Heptazin und deren Potential als Flammschutzmittel
Höhne, Carl-Christoph | Dissertation |
| 2020 | Ortsaufgelöste Untersuchungen an Redox-Flow-Batterien
Gerber, Tobias
: Tübke, J.; Langen, C.; Wetzel, T. | Dissertation |
| 2020 | PEM‐Fuel Cell Catalyst Behavior between Room Temperature and Freezing Point
Kunkel, Robin; Baumann, Nils; Jurzinsky, Till; Cremers, Carsten | Journal Article, Conference Paper |
| 2020 | Processing relationships of hybrid polymer-metal composites in the injection moulding process
Schwarz, Angela; Liebig, Wielfried; Weidenmann, Kay; Elsner, Peter | Conference Paper |
| 2020 | Rohstoffinnovationen und Rohstoffeffizienz. Editorial
Teipel, Ulrich; Schweppe, Rainer | Journal Article |
| 2020 | Simultaneous identification of wind turbine vibrations by using seismic data, elastic modeling and laser Doppler vibrometry
Zieger, Toni; Nagel, S.; Lutzmann, Peter; Kaufmann, Ilja; Ritter, J.; Ummenhofer, T.; Knödel, P.; Fischer, Peter | Journal Article |
| 2020 | Strategies to Enhance Carbon Dioxide Capture in Metal-Organic Frameworks
Piscopo, Calogero Giancarlo; Löbbecke, Stefan | Journal Article |
| 2020 | Synthesis of novel bisphosphorylimides based on Staudinger reaction
Weber, Lais; Weinert, Michael; Goedderz, Daniela; Fuhr, Olaf; Döring, Manfred | Journal Article |
| 2019 | 4-Amino-1-butyl-1,2,4-triazolium Nitrate - Synthesis and Characterization
Schaller, Uwe; Keicher, Thomas; Weiser, Volker; Hürttlen, Jürgen | Journal Article |
| 2019 | 5. Symposium Rohstoffinnovationen und Rohstoffeffizienz 2019
: Teipel, Ulrich; Schweppe, Rainer | Conference Proceedings |
| 2019 | 60 Years of Fraunhofer ICT: 60 Years of Applied Research and Development in Energetic Materials and Systems
Elsner, Peter; Eckl, Wilhelm; Löbbecke, Stefan | Journal Article |
| 2019 | Application of azide-containing molecules as modifiers of HTPB: Synthesis and evaluation of properties
Lemos, Mauricio Ferrapontoff; Mendes, Luis Claudio; Bohn, Manfred A.; Keicher, Thomas | Journal Article |
| 2019 | Assessing the structural integrity of carbon-fibre sandwich panels in fire: Bench-scale approach
Schartel, B.; Humphrey, J.K.; Gibson, A.G.; Hörold, A.; Trappe, V.; Gettwert, Volker | Journal Article |
| 2019 | Auf dem Weg zu einer geräteflexiblen, automatisierten Datenauswertung von Batterien und Brennstofzellen ("Batalyse")
Hagen, Marcus; Nave, Eran; Tübke, Jens | Presentation |
| 2019 | Aufbau eines Versuchstandes zur Validierung der Strömungssimulation eines otto-motorischen Kühlkonzeptes, welcher nach SLM-Richtlinien entwickelt ist
Abdelkefi, Mahdi
: Maliha, Maliki (Betreuer); Michler, Tobias (Betreuer) | Master Thesis |
| 2019 | Aufbau und Inbetriebnahme der QCM-Messanlage als Screeningtool für die Adsorptionseigenschaften selektiver Materialien
Souvannavong, Naryvone | Bachelor Thesis |
| 2019 | Auslegung und Aufbau eines T-History-Kalorimeters für die Charakterisierung von Phasenwechselmaterialien von -40°C bis 250°C
Wegner, Jakob | Bachelor Thesis |
| 2019 | Beobachtung des Schädigungsverhaltens von Aluminiumkolben unter TMF- und überlagerter TMF/HCF-Belastung
Vogt, Matthias
: Elsner, Peter (Betreuer); Kuhlen, Karl Gerhard | Bachelor Thesis |
| 2019 | Betauung im Bereich der Umweltsimulation - Ein Beitrag zur Validierung des Normentwurfs [E] DIN EN 60068-2-84
Bott, P.; Schmitt, T.; Cäsar, Joachim | Conference Paper |
| 2019 | Cathode plasma electrolysis in diluted potassium hydroxide solutions: Particles formation and energetic estimation
Gromov, Alexander; Nalivaiko, Anton; Fehn, Thomas; Yahya, Dewi Puspa Muhammad; Osipenkova, Alexandra; Koleczko, Andreas; Knapp, Sebastian; Teipel, Ulrich | Journal Article |
| 2019 | Characterizing of glass-rubber transition shift in filled HTPB-IPDI formulations by modified and normal Arrhenius equation
Bohn, Manfred; Ferrapontoff, Mauricio; Mußbach, Günter | Conference Paper |
| 2019 | Chemical Kinetics of the Oxidation of Manganese and of the Decomposition of MnO2 by XRD and TG Measurements
Kelzenberg, Stefan; Eisenreich, Norbert; Knapp, Sebastian; Koleczko, Andrzej; Schuppler, Heike; Fietzek, Harald | Journal Article |
| 2019 | Coating of ammonium salt particles by fluidized bed processes
Dresel, Alexander; Busch, Konstantin; Heintz, Thomas | Conference Paper |
| 2019 | Comprehensive determination of heat generation and thermal modelling of a hybrid capacitor
Miller, Martin; Baltes, Norman; Rabenecker, Peter; Hagen, Marcus; Tübke, Jens | Journal Article |
| 2019 | The Connection Between the Parameters of WLF Equation and of Arrhenius Equation
Bohn, Manfred | Journal Article |
| 2019 | Continuous Flow Desulfurization of a Model Fuel Catalysed by Titanium Functionalized UiO‐66
Piscopo, Calogero Giancarlo; Voellinger, L.; Schwarzer, Maud; Polyzoidis, Angelos; Bošković, Dusan; Löbbecke, Stefan | Journal Article |
| 2019 | Continuous microfluidic process for formation of ADN-Prills
Radulescu, Ligia; Eberhardt, Angelika; Boskovic, Dusan | Conference Paper |
| 2019 | A coupled thermomechanical approach for finite element forming simulation of continuously fiber-reinforced semi-crystalline thermoplastics
Dörr, Dominik; Joppich, Tobias; Kugele, Daniel; Henning, Frank; Kärger, Luise | Journal Article |
| 2019 | Customized Design of Scalable Microfluidic Droplet Generators Using Step-Emulsification Methods
Eberhardt, Angelika; Boskovic, Dusan; Löbbecke, Stefan; Panic, Slobodan; Winter, Yannik | Journal Article, Conference Paper |
| 2019 | Deaktivierbare Klebstoffe zur Wiederverwertung von Wärmedämmverbundsystemen -WDVS-Deaktiv-
Sims, Stefan; Urban, Helfried; Stier, Christian | Report |
| 2019 | Decomposition kinetics of RDX in cyclohexanone and gamma-butyrolactone determined with ARC and HFMC
Bohn, Manfred A. | Presentation |
| 2019 | Design and development of an electrolyte regeneration process for vanadium redox flow batteries
Poli, Nicola | Master Thesis |
| 2019 | Design und Materialcharakterisierung poröser Transportschichten für die PEM-Wasserelektrolyse
Ernst, Matthias
: Tübke, Jens; Baumann, Nils (Betreuer) | Master Thesis |
| 2019 | Design, manufacturing and mechanical investigation of a complex structural PPS injection molded part with 3D wound continuous fibers reinforcement
Tawfik, Hussam
: Henning, Frank (Betreuer); Beck, Björn | Master Thesis |
| 2019 | Designverifikation eines hochausgenutzten Elektromotors mit innenliegender Kühlung und duroplastischem Leichtbaugehäuse
Suppanz, Joseph
: Dollinger, Andreas; Jux, Benedict (Betreuer); Langheck, Andreas (Betreuer) | Master Thesis |
| 2019 | Detection of unstable process conditions during continuous nitrate ester production
Mendl, Alexander; Panic, Slobodan; Klahn, Thorsten; Boskovic, Dusan | Conference Paper |
| 2019 | Development of a property forecast tool for flexible compositions of Li-ion batteries, including raw material availability and price forming
Krsmanovic, Dejana
: Hagen, M.; Brant, W.; Munkhammar, J. | Master Thesis |
| 2019 | Digitale Zwillinge
Cäsar, Joachim | Conference Paper |
| 2019 | Dispergierung und rheologische Eigenschaften von Carbon Nanotube-Suspensionen
Dresel, Alexander | Dissertation |
| 2019 | Distribution of nitroglycerine in different ball propellants - chemometric evaluation
Kaiser, Mannfred; Schweikert, Wenka; Boskovic, Dusan | Conference Paper |
| 2019 | Dithiocyanurates and thiocyamelurates: Thermal thiyl radical generators as flame retardants in polypropylene
Höhne, Carl-Christoph; Posern, C.; Böhme, U.; Eichler, F.; Kroke, E. | Journal Article |
| 2019 | Dreidimensionale Faserskelette
Beck, Björn; Haas, Jonathan; Tawfik, Hussam | Journal Article |
| 2019 | Durchgangswiderstand von Staubschüttungen - Messverfahren und Einflussgrößen
Teipel, Ulrich; Wolf, Sebastian; Schreiber, Alex | Conference Paper |
| 2019 | Effects on Progression Rate of Thermite Pellets
Knapp, Sebastian; Kelzenberg, Stefan; Becker, Wolfgang; Lity, André; Roth, Evelin; Wacker, Karin; Weiser, Volker | Conference Paper |
| 2019 | Einsetzbarkeit der Biopolyole aus Pflanzenölen auf der Darstellung von PUR-Weichschaum
Zhang, Lin | Master Thesis |
| 2019 | Electrochemical stability of silica-templated polyaniline-derived mesoporous N-doped carbons for the design of Pt-based oxygen reduction reaction catalysts
Melke, Julia; Schuster, Robin; Möbus, Sascha; Jurzinsky, Tilman; Elsässer, Patrick; Heilemann, Axel; Fischer, Anna | Journal Article |
| 2019 | Emission Spectroscopy of the Combustion Flame of Aluminium/Copper Oxide Thermite
Knapp, Sebastian; Kelzenberg, Stefan; Raab, Angelika; Roth, Evelin; Weiser, Volker | Journal Article |
| 2019 | Energetic materials. Past, present and future
| Conference Proceedings |
| 2019 | Entwicklung einer Methode zur Charakterisierung der oberflächlichen makroskopischen Rovingorientierung bei unidirektional endlosfaserverstärkten Verbundwerkstoffen
Sauerwein, Vladimir | Master Thesis |
| 2019 | Entwicklung einer RTM Prozessvariante zur kavitätsdruckgeregelten Herstellung von Faserverbundstrukturbauteilen
Rosenberg, Philipp | Dissertation |
| 2019 | Entwicklung eines Verbrennungsmodells für wasseremulgierte Flüssigbrennstoffe
Baust, Tobias Michael
: Zarzalis, Nikolaos (Erstgutachter); Suntz, Rainer (Zweitgutachter) | Dissertation |
| 2019 | Environment-Friendly Composite Propellants Based on Ammonium Dinitramide
Gettwert, Volker; Weiser, Volker; Tagliabue, Claudio; Hafner, Sven; Fischer, Sebastian | Journal Article |
| 2019 | Environmental factors and their impact on the transition, safety and function of selected processes, systems and products
Schmid, Helmut | Conference Paper |
| 2019 | Experimental and numerical study of the spring-in of angled brackets manufactured using different resins and fiber textiles
Bernath, A.; Groh, F.; Exner, W.; Hühne, C.; Henning, F. | Journal Article |
| 2019 | An experimental and numerical survey into the potential of hybrid foams
Hohe, Jörg; Beckmann, Carla; Böhme, Wolfgang; Weise, Jörg; Reinfried, Matthias; Luthardt, Fabian; Rapp, Florian; Diemert, Jan | Journal Article |
| 2019 | Failure mode maps for four-point-bending of hybrid sandwich structures with carbon fiber reinforced plastic face sheets and aluminum foam cores manufactured by a polyurethane spraying process
Rupp, Peter; Elsner, Peter; Weidenmann, K.A. | Journal Article |
| 2019 | Fast processing and continuous simulation of automotive structural composite components
Henning, F.; Kärger, L.; Dörr, D.; Schirmaier, F.J.; Seuffert, J.; Bernath, A. | Journal Article |
| 2019 | Fractionation of three different lignins by thermal separation techniques
Rohde, Viktoria; Böringer, Sarah; Tübke, Beatrice; Adam, Christian; Dahmen, Nicolaus; Schmiedl, Detlef | Journal Article |
| 2019 | Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2018/2019
| Annual Report |
| 2019 | Functionalization of multi-walled carbon nanotubes with indazole
Jurzinsky, T.; Gomez-Villa, E.D.; Kübler, M.; Bruns, M.; Elsässer, P.; Melke, J.; Scheiba, F.; Cremers, C. | Journal Article |
| 2019 | Funktionsintegrierte Duromere Faserverbundwerkstoffe für neue Anwendungen
Griesbaum, Patrick; Ilinzeer, Sergej; Maertens, Robert; Laux, Marcel | Journal Article |
| 2019 | Funktionsprototypenentwicklung von Wärmespeichersystemen mittels Fused Filament Fabrication
Salehi, Simon | Bachelor Thesis |
| 2019 | Grundlagen und Verfahren zur profilierten Erwärmung von PET-Preforms mit Mikrowellen
Graf, Matthias Harald
: Elsner, P.; Jelonnek, J. | Dissertation |
| 2019 | Herstellung und Eigenschaften neuartiger Compounds zur additiven Fertigung poröser Transportschichten für die PEM-Wasserelektrolyse
Maletzko, Annabelle
: Tübke, Jens (Betreuer); Höhne, Carl-Christoph (Betreuer); Guber, Andreas (Gutachter) | Master Thesis |
| 2019 | Herstellung, Optimierung und Charakterisierung von thermoplastischen Schaumstoffen, vor dem Hintergrund der Einstellbarkeit von Zellgröße und Offenzelligkeit
Hofmann, Heiko | Master Thesis |
| 2019 | HMX crystal topography investigated by means of atomic force microscopy and confocal microscopy
Herrmann, Michael; Weyrauch, Hubert | Conference Paper |
| 2019 | Hochleistungsfähige und alterungsstabile HT-PEMFC Membranelektrodeneinheiten durch neue Anbindungskonzepte Katalysator/Träger/Protonenleiter (HT-Linked)
Cremers, Carsten; Jurzinsky, Tilman; Baumann, Nils | Report |
| 2019 | Hybrid Composites for Automotive Applications - Development and Manufacture of a System-integrated Lightweight floor Structure in multi-material Design
Link, Tobias; Behnisch, Felix; Rosenberg, Philipp; Seuffert, Julian; Dörr, Dominik; Hohberg, Martin; Joppich, Tobias; Henning, Frank | Conference Paper |
| 2019 | Igniter Compositions for Lova and Double-Base Propellants Containing
Weiser, Volker; Kelzenberg, Stefan; Knapp, Sebastian; Koleczko, Andreas; Roth, Evelin | Journal Article |
| 2019 | Ignition of flare propellants using AL/NI-Nanofoils at sub-atmospheric pressure
Weiser, Volker; Roth, Evelin; Knapp, Sebastian; Lity, A. | Conference Paper |
| 2019 | Improving the Processability of Graphene Nanoplatelets in Polyamide 6 during Melt Compounding Extrusion
Blanco-Villalba, José Francisco; Recio, Imanol; Gómez-Cordón, Julio; Hübner, Christof | Conference Paper |
| 2019 | Influence of glyoxal on curing of urea-formaldehyde resins
Perminova, D.A.; Malkov, V.S.; Gusсhin, V.; Eisenreich, N. | Journal Article |
| 2019 | Injection molding simulation of short fiber reinforced thermosets with anisotropic and non-Newtonian flow behavior
Wittemann, Florian; Märtens, Robert; Kärger, Luise; Henning, Frank | Journal Article |
| 2019 | Die Integration von Fragestellungen der Circular Economy in die Ökobilanzierung
Dieterle, Michael; Viere, Tobias | Book Article |
| 2019 | Interaction parameters in plasticizer-plasticizer-mixtures
Mitró, Daniel; Böhnlein-Mauß, Jutta; Pfatteicher, Axel | Conference Paper |
| 2019 | Interpreting LCA results from a life cycle and circular economy perspective: Application of the life cycle gap-analysis
Dieterle, Michael; Viere, Tobias | Abstract |
| 2019 | Investigation of Crystallisation Conditions to Produce CL-20/HMX Cocrystal for Polymer-bonded Explosives
Herrmannsdörfer, Dirk; Gerber, Peter; Heintz, Thomas; Herrmann, Michael; Klapötke, Thomas | Journal Article |
| 2019 | Investigation of the microstructure of ADN-Prills using 2D-X-Ray diffraction
Kempa, Paul-Bernd; Fietzek, Harald; Herrmann, Michael; Heintz, Thomas | Conference Paper |
| 2019 | Investigations of ETPE formulations for additive manufacturing
Schaller, Uwe; Mitró, Daniel; Böhnlein-Mauß, Jutta; Keicher, Thomas | Conference Paper |
| 2019 | Kinetic study on some cases of the curing reaction behaviour of A-B systems with A and B as isocyanate and polyol or amine and epoxide
Bohn, Manfred | Conference Paper |
| 2019 | Kombination von Sheet und Bulk Molding Compound in Jutefaserverbunden
Lautenschläger, Miriam Isabell
: Elsner, P.; Büter, A.; Weidenmann, K.A. | Dissertation |
| 2019 | Lifetime of airbag inflators: Perspectives for a better understanding and prediction of aging mechanisms
Yurrita, Pedro; Kuchenreuther-Hummel, Veronica; Pietsch, Erik; Bermejo, Jorge | Conference Paper |
| 2019 | Lignin Oxidation for the Exploitation of High Value Oligomer Building Blocks
Jänisch, Thorsten | Presentation |
| 2019 | A machine learning assisted approach for textile formability assessment and design improvement of composite components
Zimmerling, Clemens; Dörr, Dominik; Henning, Frank; Kärger, Luise | Journal Article |
| 2019 | Makroskopische Reibwertsteuerung durch elektrochemische Potentiale mit ionischen Flüssigkeiten
Gatti, F.; Amann, T.; Kailer, A.; Abicht, Johannes; Rabenecker, P.; Baltes, N.; Rühe, J. | Journal Article |
| 2019 | Maßnahmen zur Reduktion der Ausschussquote bei der Produktion von Lithium-Ionen Zellen
Hilger, Celine
: Franke, D.; Meilinger, S.; Hagen, M. | Bachelor Thesis |
| 2019 | Mechanical properties of foamed long glass fiber reinforced polyphenylene sulfide integral sandwich structures manufactured by direct thermoplastic foam injection molding
Lohr, C.; Beck, B.; Henning, Frank; Weidenmann, K.A.; Elsner, Peter | Journal Article |
| 2019 | Methodenentwicklung zur Charakterisierung der Aushärtung duromerer Komposite mittels dielektrischer Analyse
Ricker, Daniel
: Ilinzeer, Sergej (Projektleiter); Henning, Frank (Betreuer) | Master Thesis |
| 2019 | Modelling of Al/MnO2 and Ti/MnO2 Thermite Mixtures
Knapp, Sebastian; Eisenreich, Norbert; Kelzenberg, Stefan; Roth, Evelin; Weiser, Volker | Journal Article |
| 2019 | Modelling of the heat transfer coefficient in a nozzle bomb for gun propellant erosivity studies
Bermejo, Jorge; Yurrita, Pedro | Conference Paper |
| 2019 | Modified and normal Arrhenius equation to characterize glass-rubber transition shifts in filled HTPB-IPDI formulations
Bohn, Manfred A.; Lemos, Mauricio Ferrapontoff; Mußbach, Günter | Conference Paper |
| 2019 | Modular Thinking. Development of a Production Plant for Hybrid Fiber Composite Components
Kilian, Sascha; Joppich, Tobias | Journal Article |
| 2019 | Der modulare Gedanke. Entwicklung einer Anlage für die Produktion hybrider Faserverbund-Bauteile
Joppich, Tobias; Kilian, Sascha | Journal Article |
| 2019 | Molecularly Imprinted Sol-Gel for TNT Detection with Optical Micro-Ring Resonator Sensor Chips
Eisner, Ludmila; Wilhelm, Isabel; Flachenecker, Günter; Hürttlen, Jürgen; Schade, Wolfgang | Journal Article |
| 2019 | New Approach for the Efficient Attainment of Flame Retardancy Using Multi Component Injection Molding
Schneider, Dorothea; Hübner, Christof; Bourbigot, Serge | Conference Paper |
| 2019 | Numerical modeling of a hybrid forming process for three-dimensionally curved fiber-metal laminates
Werner, Henrik O.; Dörr, Dominik; Henning, Frank; Kärger, Luise | Conference Paper |
| 2019 | On the effect of electric field application during the curing process on the electrical conductivity of single-walled carbon nanotubes–epoxy composites
Morais, Manuel V.C.; Oliva-Aviles, A.I.; Matos, M.A.S.; Tagarielli, V.L.; Pinho, S.T.; Hübner, Christof; Henning, Frank | Journal Article |
| 2019 | On the relevance of thermomechanics and crystallization kinetics for FE thermoforming simulation of semi-crystalline thermoplastic tapes
Dörr, Dominik; Kugele, Daniel; Joppich, Tobias; Henning, Frank; Kärger, Luise | Conference Paper |
| 2019 | Optimierung eines säure-katalysierten Ethanol-Wasser Organosolv-Prozesses für die Biomassen Pappel mit Rinde und Miscanthus G. in Hinblick auf Ligninfraktionierung und -funktionalisierung
Rohde, Viktoria
: Dahmen, N.; Syldatk, C. | Dissertation |
| 2019 | Oxidation kinetic studies of tic-particles using x-ray diffraction
Kuchenreuther-Hummel, Veronica | Conference Paper |
| 2019 | Particle properties and crystalline structure of ADN-Prills
Heintz, Thomas; Herrmann, Michael | Conference Paper |
| 2019 | Pressure and Temperature Dependency of ADN-based Solid Rocket Propellants
Imiolek, Andreas; Becker, Wolfgang; Weiser, Volker; Bieroth, Diana | Conference Paper |
| 2019 | Process Development for Chemical Recycling of Bio-based Polymers
Majgaonkar, Pranav | Master Thesis |
| 2019 | Processing of plastic bonded explosives with new mixing technologies
Gerber, Peter; Happ, Andreas | Conference Paper |
| 2019 | Progress in Additive Manufacturing of Energetic Materials: Creating the Reactive Microstructures with High Potential of Applications
Muravyev, N.V.; Monogarov, K.A.; Schaller, Uwe; Fomenkov, I.V.; Pivkina, A.N. | Journal Article |
| 2019 | Properties and Structure of ADN-Prills
Heintz, Thomas; Herrmann, Michael | Journal Article |
| 2019 | Prozess-Struktur-Eigenschafts-Beziehungen hybrider Polymer-Metall-Verbundstrukturen aus dem Spritzgießprozess
Schwarz, Angela | Master Thesis |
| 2019 | Prozessierung hochgefüllter Kunststoffe mittels Werkstoffextrusion
Mitró, Daniel; Schaller, Uwe | Poster |
| 2019 | Reaktoren für spezielle technisch-chemische Prozesse: Mikrostrukturreaktoren
Boskovic, Dusan | Book Article |
| 2019 | Rechnerische Bewertung der Bauteillebensdauer von Aluminiumgusskomponenten unter kombinierter thermomechanischer und hochfrequenter Belastung
Fischer, C.; Schweizer, C.; Mittag, S.; Seifert, T.; Elsner, P. | Report |
| 2019 | Recocido subcrítico de aceros de alta resistencia y estudio de su comportamiento frente al desgaste provocado por la combustión de explosivos
Bermejo Sanz, Jorge | Dissertation |
| 2019 | Recycled Poly(Ethylene Terephthalate)/Clay Nanocomposites
Chowreddy, R.R.; Nord-Varhaug, K.; Rapp, F. | Journal Article |
| 2019 | Segmented Printed Circuit Board Electrode for Locally-Resolved Current Density Measurements in All-Vanadium Redox Flow Batteries
Gerber, Tobias; Fischer, Peter; Pinkwart, Karsten; Tübke, Jens | Journal Article |
| 2019 | Separation of volatile fatty acids (VFA) formed during the biogas process - OPTIGÄR
Jänisch, Thorsten | Presentation |
| 2019 | Separation of volatile fatty acids from biogas plant hydrolysates
Jänisch, Thorsten; Reinhardt, Sebastian; Pohsner, Ute; Böringer, Sarah; Bolduan, R.; Steinbrenner, J.; Oechsner, H. | Journal Article |
| 2019 | Simulation of Damage Characteristics
Fischer, C.; Mittag, S.; Kuhlen, Karl Gerhard; Schweizer, C; Seifert, T.; Dittrich, Robert; Kollmeier, Hans-Peter | Report |
| 2019 | Simulieren, aber richtig! Das Problem der reversiblen Wasseraufnahme bei Waterborne-Beschichtungen
Becker, Wolfgang; Cäsar, Joachim; Knapp, Sebastian; Koleczko, Andreas; Schmid, Helmut | Conference Paper |
| 2019 | Specific bending stiffness of in-mould-assembled hybrid sandwich structures with carbon fibre reinforced polymer face sheets and aluminium foam cores manufactured by a polyurethane-spraying process
Rupp, Peter; Elsner, Peter; Weidenmann, K.A. | Journal Article |
| 2019 | Stärkebasierte Textilien: Kostengünstige Textilien aus Biopolymeren
Manvi, Pavan Kumar; Möbitz, Christian; Buczko, Aleksandra; Schawaller, Dirk; Müller, Christoph | Report |
| 2019 | Structure and thermal behavior of TKX-50
Herrmann, Michael; Förter-Barth, Ulrich | Conference Paper |
| 2019 | Sulfides and Disulfides of s-Triazine and s-Heptazine: Flame Retardancy
Höhne, Carl-Christoph; Posern, Christian; Böhme, Uwe; Kroke, Edwin | Poster |
| 2019 | Supercritical water as reaction media
Jänisch, Thorsten | Presentation |
| 2019 | Supermet: Recovery of precious metals from spent catalysts by supercritical CO2 Extraction assisted by polymers
Jänisch, Thorsten; Ruiu, Andrea; Seaudeau-Pirouley, Karin; Senila, Marin; Bauer-Siebenlist, Bernhard; Lacroix-Desmazes, Patrick | Presentation |
| 2019 | Synthesis of Thiocyameluric Acid C6N7S3H3, its Reaction to Alkali Metal Thiocyamelurates and Organic Tris(dithio)cyamelurates
Posern, Christian; Höhne, Carl-Christoph; Böhme, Uwe; Vogt, Claudia; Kroke, Edwin | Journal Article |
| 2019 | Thermal Characterization of Naturally Aged Propellants
Heil, Moritz; Hickmann, Jürgen; Müller, Christian | Journal Article |
| 2019 | Thermites - Versatile Materials
Koch, Ernst‐Christian; Knapp, Sebastian | Journal Article |
| 2019 | Three-Dimensional fiber skeleton
Beck, Björn; Haas, Jonathan; Tawfik, Hussam | Journal Article |
| 2019 | Trace level detection of explosives by surface enhanced raman spectroscopy (SERS) for defence applications - best practice
Schweikert, Wenka; Schnürer, Frank; Mendl, Alexander; Müller, S. | Conference Paper |
| 2019 | UD-Tape basierte Bauteile in kurzer Zykluszeit. Strahlungsinduzierte Vakuumkonsolidierung beschleunigt UD-Tape-Verarbeitung
Link, Tobias | Journal Article |
| 2019 | Untersuchungen zum Leistungs- und Korrosionsverhalten eines HT-PEM-Brennstoffzellen-Stacks
Zick, Lars Moritz | Master Thesis |
| 2019 | UV/VIS Spektroskopie zur kontinuierlichen Bestimmung des Ladezustandes eines Vanadium Redox Flow Batterie
Winter, Christoph | Master Thesis |
| 2019 | Vanadium electrolyte for all-vanadium redox-flow batteries: The effect of the counter ion
Roznyatovskaya, Nataliya; Noack, Jens; Mild, Heiko; Fühl, Matthias; Fischer, Peter; Pinkwart, Karsten; Tübke, Jens; Skyllas-Kazacos, Maria | Journal Article |
| 2019 | Vanadium Oxygen Fuel Cell Utilising High Concentration Electrolyte
Risbud, Mandar; Menictas, Chris; Skyllas-Kazacos, Maria; Noack, Jens | Journal Article |
| 2019 | Verbrückte Phosphorverbindungen als Flammschutzmittel in Epoxidharzen
Weinert, Michael
: Döring, Manfred (Gutachter); Mastalerz, M. (Gutachter) | Dissertation |
| 2019 | Verfahrensoptimierung der Herstellung von Nanocellulose-Trägermedium-Gemische zur Einarbeitung in Biopolymere
Heymann, Valeska
: Wiskamp, Volker; Gräbe, Gudrun | Bachelor Thesis |
| 2019 | Virtual process chain of sheet molding compound: Development, validation and perspectives
Görthofer, J.; Meyer, N.; Pallicity, T.D.; Schöttl, L.; Trauth, A.; Schemmann, M.; Hohberg, M.; Pinter, P.; Elsner, Peter; Henning, Frank; Hrymak, A.; Seelig, T.; Weidenmann, K.; Kärger, L.; Böhlke, T. | Journal Article |
| 2019 | Water Management in a High Current Density PEM Electrolysis Cell
Reum, Tobias | Master Thesis |
| 2019 | The way towards a CL-20/HMX Cocrystal scale-up
Herrmannsdörfer, Dirk; Herrmann, Michael; Heintz, Thomas; Gerber, Peter; Klapötke, Thomas M. | Conference Paper |
| 2019 | Weiterentwicklung einer Methodik zur rheologischen Untersuchung von schnellhärtenden Epoxidharzen
Dietrich, Philipp
: Henning, Fraunk (Betreuer); Hüttl, Julian (Projektleiter) | Bachelor Thesis |
| 2019 | Werkstoffcharakterisierung zur Prozessentwicklung der Materialvorbehandlung für die Eignung im T-RTM Herstellverfahren
Herzog, Janek
: Wendel, Rainer (Betreuer); Pöhler, Frank (Betreuer) | Master Thesis |
| 2018 | A 2D modeling approach for fluid propagation during FE-forming simulation of continuously reinforced composites in wet compression moulding
Poppe, C.; Dörr, D.; Henning, F.; Kärger, L. | Conference Paper |
| 2018 | Accelerated ageing and hydrolytic stabilization of poly(lactic acid) (PLA) under humidity and temperature conditioning
Porfyris, A.; Vasilakos, S.; Zotiadis, C.; Papaspyrides, C.; Moser, K.; Schueren, L. van der; Buyle, G.; Pavlidou, S.; Vouyiouka, S. | Journal Article |
| 2018 | Accurate description of the ageing of energetic materials
Heil, Moritz | Conference Paper |
| 2018 | Airbag 2018, 14th International Symposium and Accompanying Exhibition on Sophisticated Car Occupant Safety Systems
| Conference Proceedings |
| 2018 | Almost inseparable. Strong adhesion in metal-polymer compounds due to nanoporous adhesive layer
Emmerich, Rudolf; Laux, Marcel; Dreher, Ralf | Journal Article |
| 2018 | Analysis of gases emitted in safety events
Abert, M. | Book Article |
| 2018 | Ap-free composite propellants as reclament for AP/HTPB/AL
Tagliabue, Claudio; Fischer, Sebastian; Gettwert, Volker; Weiser, Volker | Conference Paper |
| 2018 | Application and evaluation of meta-model assisted optimisation strategies for gripper assisted fabric draping in composite manufacturing
Zimmerling, Clemens; Pfrommer, Julius; Liu, Jinzhao; Beyerer, Jürgen; Henning, Frank; Kärger, Luise | Conference Paper |
| 2018 | Beinahe unzertrennlich. Hohe Festigkeit durch nanoporöse Haftschicht für Metall-Kunststoff-Verbunde
Emmerich, Rudolf; Laux, Marcel; Dreher, Ralf | Journal Article |
| 2018 | Beobachtung des Schädigungsverhaltens von Zylinderkopfproben bei TMF-Belastung
Cömertpay, Hatem
: Koch, Thomas (Betreuer); Kuhlen, Gerhard (Betreuer) | Master Thesis |
| 2018 | Binder crystal adhesion measured in macro HMX/HTPB-composites
Kronis-Rudigier, Gunnar; Herrmann, Michael | Conference Paper |
| 2018 | Burning behaviour of ADN solid propellants in comparison to other oxidizers
Imiolek, Andreas; Weiser, Volker; Locatelli, Francesco; Tagliabue, Claudio; Gettwert, Volker; Bieroth, Diana | Conference Paper |
| 2018 | Burning behaviour of energetic ionic liquids investigated with-4-amino-1-methyl-1,2,4-triazolumnitrat
Weiser, Volker; Schaller, Uwe | Conference Paper |
| 2018 | Camphor coated powders investigated by imaging spectroscopy
Pontius, Heike; Dörich, Manuela; Heil, Moritz | Conference Paper |
| 2018 | Characterisation of particle mixtures by nano computer tomography
Knapp, Sebastian; Koleczko, Andreas; Kröber, Hartmut | Conference Paper |
| 2018 | Characterization of gun propellants containing bateg
Böhnlein-Mauß, Jutta; Mitró, Daniel; Keicher, Thomas | Conference Paper |
| 2018 | Characterization of polyester-based polyurethane elastomers plasticized with energetic ionic liquids
Lemos, Mauricio Ferrapontoff; Bohn, Manfred A.; Schaller, Uwe | Conference Paper |
| 2018 | Charakterisierung der Einflussparameter für das Verarbeiten von PA6 Hybridrovings im Wickelverfahren für endlosglasfaserverstärkte Spritzgussbauteile
Becker, Jerome | Master Thesis |
| 2018 | Chemical Recycling of post-consumer Mattress Materials
Yogish, Savina Padumane | Master Thesis |
| 2018 | Comminution of energetic materials in viscous binder components with high solid loadings
Dresel, Alexander; Gerber, Peter; Roßmann, Christian; Heintz, Thomas | Conference Paper |
| 2018 | The connection between WLF equation and Arrhenius equation
Bohn, Manfred A. | Conference Paper |
| 2018 | Copolymers based on GAP and 1,2‐Epoxyhexane as Promising Prepolymers for Energetic Binder Systems
Hafner, S.; Keicher, T.; Klapötke, T.M. | Journal Article |
| 2018 | Corrossion behaviour of aluminide diffusion coatings on ferritic steel in molten Solar Salt
Weick, Sarah | Master Thesis |
| 2018 | D 6.8 PEDR Plan for the Exploitation and Dissemination of Results. Final Report
Lagioia, Rocco
: Müller, Torsten; Forte, Federica; Araujo, Blanca; Yurramendi, Lourdes; Sgarioto, Rocca; García, Jose Manuel | Report |
| 2018 | D 7.2 Second Progress Report Part A
Rodriguez, Alicia; Araujo, Blanca; González, Manuel; Maroto, Jose Antonio; Val, Diego; García, Jose Manuel; Müller, Torsten; Lagioia, Rocco | Report |
| 2018 | D 7.3 Third Progress Report
Rodriguez, Alicia; Araujo, Blanca; González, Manuel; Maroto, Jose Antonio; Müller, Torsten; Val, Diego; García, Jose Manuel; Lagioia, Rocco | Report |
| 2018 | Decolorization of plastics by extraction of pigments with supercritical CO2
Jänisch, Thorsten; Unser, Steffen | Poster |
| 2018 | Demonstration of a Nonlinear Model Predictive Control of a Thermal Management System for Electric Vehicles in Real-Time
Fischer, T.; Kraus, T.; Kirches, C.; Gauterin, F. | Conference Paper |
| 2018 | DEMS and online mass spectrometry studies of the carbon support corrosion under various polymer electrolyte membrane fuel cell operating conditions
Cremers, Carsten; Jurzinsky, Tilman; Meier, Jan; Schade, A.; Branghofer, Marco; Pinkwart, Karsten; Tübke, Jens | Journal Article |
| 2018 | Development of electrolytes for lithium-sulfur batteries with focus on electrochemical and electrolyte decomposition analyses
Nave, Eran | Master Thesis |
| 2018 | Development of full carbon wheels for sport cars with high-volume technology
Rondina, Francesco; Taddia, Sara; Mazzocchetti, Laura; Donati, Lorenzo; Minak, Giangiacomo; Rosenberg, Philipp; Bedeschi, Andrea; Dolcini, Enrico | Journal Article |
| 2018 | DMA of polyester-based polyurethane elastomers for composite rocket propellants containing different energetic plasticizers
Lemos, M.F.; Bohn, M.A. | Journal Article |
| 2018 | Effect of HMX distribution and plasticizer content variations on the DMA loss factor of HTPB-IPDI binder
Bohn, Manfred A.; Gerber, Peter; Heintz, Thomas; Herrmann, Michael | Conference Paper |
| 2018 | The Effect of Nonlinearity on Determined Parameters of Gun Propellant Burn Rate Models
Wurster, S. | Journal Article |
| 2018 | Einleuchtende Idee. Fraunhofer ICT verarbeitet leitfähiges Material in der additiven Fertigung
Hübner, Christof | Journal Article |
| 2018 | Electrolyte decomposition and electrode thickness changes in Li-S cells with lithium metal anodes, prelithiated silicon anodes and hard carbon anodes
Hancock, K.; Becherer, J.; Hagen, M.; Joos, M.; Abert, M.; Müller, D.; Franz, P.; Straach, S.; Tübke, J. | Journal Article |
| 2018 | Entwicklung einer neuartigen Verarbeitungstechnologie zur universellen Umformung von endlosfaserverstärkten thermoplastischen Hohlprofilen
Liyang, Hong | Master Thesis |
| 2018 | Entwicklung eines additiv gefertigten Kurbelgehäuses für einen Einzylinder Rennmotor
Hirzler, Ingo | Master Thesis |
| 2018 | Entwicklung eines Reglers für die Austrittstemperatur von Wirbelrohren
Brantin, Alexej | Bachelor Thesis |
| 2018 | Entwicklung und Evaluation von alkoholtoleranten Pt-basierten Kathodenkatalysatoren für Direktalkohol-Brennstoffzellen-Anwendungen
Cremers, Carsten | Report |
| 2018 | Evaluation of an Integral Injection Molded Housing for High Power Density Synchronous Machines with Concentrated Single-Tooth Winding
Langheck, Andreas; Reuter, Steffen; Saburow, Oleg; Märtens, Robert; Wittemann, Florian; Berg, Lars Frederik; Doppelbauer, Martin | Conference Paper |
| 2018 | Experimental and numerical investigation of the shear behaviour of infiltrated woven fabrics
Poppe, C.; Dörr, D.; Henning, F.; Kärger, L. | Journal Article |
| 2018 | Experimental calibration of manganin pressure gauges
Wurster, Sebastian; Schrabback, M.; Leibold, Marvin | Conference Paper |
| 2018 | Fertigung ionisch leitender Membranen für den Einsatz in Festkörperbatterien
Theil, Patrik André
: Doppelbauer, Martin; Tübke, Jens (Betreuer); Ahlbrecht, Katharina (Betreuer) | Master Thesis |
| 2018 | Foam injection molding of glass fiber reinforced polypropylene composites with laminate skins
Kasemphaibulsuk, Pibulchai; Holzner, Marcel; Kuboki, Takashi; Hrymak, Andrew | Journal Article |
| 2018 | Following isocyanate-polyol curing by volume shrinkage induced pressure decrease - considering reaction volume, activation volume, compressibility and diffusion control
Bohn, Manfred A. | Conference Paper |
| 2018 | Formation of ADN-prills in microfluidic droplet generators
Radulescu, Ligia; Eberhardt, Angelika; Boskovic, D. | Conference Paper |
| 2018 | Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2017/2018
| Annual Report |
| 2018 | Fuel Flexible, Near Zero Emissions, Adaptive Performance Marine Engine
: Kuhle, Karl Gerhard | Report |
| 2018 | Gasanalytik, Schichtdickenmessungen und Stabilitätsuntersuchungen an kostengünstigen Elektroden für stationäre Energiespeicher
Petit, Jan
: Tübke, Jens (Betreuer); Pfeifer, Peter (Gutachter); Hagen, Marcus (Betreuer) | Master Thesis |
| 2018 | High temperature molten salt corrosion behavior of aluminide and nickel-aluminide coatings for heat storage in concentrated solar power plants
Audigié, P.; Encinas-Sánchez, V.; Juez-Lorenzo, M.; Rodríguez, S.; Gutiérrez, M.; Pérez, F.J.; Agüero, A. | Journal Article |
| 2018 | Hybrid materials - Joining of polymers and metals
Spancken, Dominik; Laveuve, Dominik M.; Beck, J.; Stötzner, Norbert; Straeten, Kira van der; Büter, Andreas; Henning, Frank | Conference Paper |
| 2018 | Hybrid thermoplastic composites for automotive applications - Development and manufacture of a lightweight rear floor structure in multi-material design
Link, Tobias; Baumgärtner, Sascha; Dörr, Dominik; Hohberg, Martin; Henning, Frank | Conference Paper |
| 2018 | Illuminating Idea. Fraunhofer ICT processes conductive material in additive manufacturing
Hübner, Christof | Journal Article |
| 2018 | Impact of carbon support functionalization on the electrochemical stability of Pt fuel cell catalysts
Schmies, H.; Hornberger, E.; Anke, B.; Jurzinsky, T.; Nong, H.N.; Dionigi, F.; Kühl, S.; Drnec, J.; Lerch, M.; Cremers, C.; Strasser, P. | Journal Article |
| 2018 | Inbetriebnahme eines Prüfstands zur Bestimmung des Einflusses von kombinierter TMF/HCF-Belastung auf die Lebensdauer von Aluminiumkolben
Koleczko, Rubens | Bachelor Thesis |
| 2018 | Influence of ADN/Nitramine Mixtures on the Burning Behaviour of Composite Propellants with Inert and Energetic Binders
Locatelli, Francesco | Master Thesis |
| 2018 | The influence of electrochemical treatment on electrode reactions for vanadium redox-flow batteries
Noack, J.; Roznyatovskaya, N.; Kunzendorf, J.; Skyllas-Kazacos, M.; Menictas, C.; Tübke, J. | Journal Article |
| 2018 | Influence of HFO refrigerants on the viscoelastic behavior of elastomers
Eyerer, S.; Eyerer, P.; Wieland, C.; Spliethoff, H. | Conference Paper |
| 2018 | Integration of electronic components in the thermoplastic processing chain: Possibilities through additive manufacturing using conductive materials
Morais, M.V.C.; Reidel, R.; Weiss, P.; Baumann, S.; Hübner, C.; Henning, F. | Conference Paper |
| 2018 | Internal plasticized glycidyl azide polyethers for solid propellant binders
Hafner, Sven; Keicher, Thomas | Conference Paper |
| 2018 | Intrinsic flame resistance of polyurethane flexible foams: Unexpectedly low flammability without any flame retardant
Höhne, Carl-Christoph; Hanich, Ronny; Kroke, Edwin | Journal Article |
| 2018 | Inverse Gaschromatographie Untersuchungen für Alkane, Alkohole, Aromaten und Nitroverbindungen zur Charakterisierung eines selektiven Multiadsorbers
Schuster, Martina
: Flick, Klemens (Betreuer); Wittek, Michael (Betreuer) | Master Thesis |
| 2018 | Klär- und Abwasseraufbereitung: Membrantechnologien und Hydrothermale Carbonisierung (HTC) inkl. Prozesswasseraufbereitung
Jänisch, Thorsten | Presentation |
| 2018 | Life cycle assessment: A tool to eco-design structural composite parts
Reichert, T.; Salles, A. | Conference Paper |
| 2018 | Life cycle gaps: Interpreting LCA results with a circular economy mindset
Dieterle, Michael; Schäfer, Philipp; Viere, Tobias | Journal Article, Conference Paper |
| 2018 | Locally continuous-fiber reinforced sheet molding compound
Bücheler, David
: Henning, F.; Osswald, T.A.; Weidenmann, K.A.; Möslang, A. | Dissertation |
| 2018 | Long-term behaviour of Nb and Cr nitrides nanostructured coatings under steam at 650 °C
Agüero, Alina; Juez-Lorenzo, Maria; Hovsepian, Papken; Ehiasarian, Arutiun Papken; Purandare, Yashodhan; Muelas, Raúl | Journal Article |
| 2018 | Makroskopische Reibwertsteuerung durch elektrochemische Potentiale mit ionischen Flüssigkeiten
Gatti, F.; Amann, T.; Kailer, A.; Rabenecker, P.; Baltes, N.; Rühe, J. | Conference Paper |
| 2018 | Mass flow determination of airbag inflators
Yurrita, Pedro; Klahn, Thorsten; Neutz, Jochen; Edelmann, Nico | Conference Paper |
| 2018 | Material- und Verfahrensentwicklung zur industriellen Umsetzung großflächiger endlosfaserverstärkter Bauteile aus aPA6 - am Beispiel von 2D-Flechtbauteilen
Pfister, Sandra Kathrin | Dissertation |
| 2018 | MD simulation of HMX rupture under tensile stress
Nardai, Michael M.; Bohn, Manfred A. | Conference Paper |
| 2018 | Messtechnische Erfassung und Auswertung eines thermischen Solarkollektorfeldes
Glastetter, Anton | Bachelor Thesis |
| 2018 | A meta-model based approach for rapid formability estimation of continuous fibre reinforced components
Zimmerling, C.; Dörr, D.; Henning, F.; Kärger, L. | Conference Paper |
| 2018 | Methanol oxidation reaction on core-shell structured Ruthenium-Palladium nanoparticles: Relationship between structure and electrochemical behavior
Kübler, M.; Jurzinsky, T.; Ziegenbalg, D.; Cremers, C. | Journal Article |
| 2018 | Microstructure and Thermal Behavior of ADN-Prills investigated by means of X-ray Diffraction. Pt.II
Herrmann, Michael; Förter-Barth, Ulrich; Kempa, Bernd; Heintz, Thomas | Conference Paper |
| 2018 | Modellierung und Simulation eines Pufferbehälters mit Luftumwälzung zur Durchmischung einer Sprengstoff-Wasser Suspension mit OpenFOAM
Schmähl, Florian | Master Thesis |
| 2018 | Modellierung, Simulation und Charakterisierung des Abbrandes extrudierbarer Festtreibstoffe mit komplexer Querschnittgeometrie
Wurster, Sebastian
: Elsner, Peter; Teipel, Ulrich | Dissertation |
| 2018 | Modelling approach for anisotropic inter-ply slippage in finite element forming simulation of thermoplastic UD-tapes
Dörr, Dominik; Faisst, Markus; Joppich, Tobias; Poppe, Christian; Henning, Frank; Kärger, Luise | Conference Paper |
| 2018 | Moisture sorption of ɛ-caprolactam and its influence on the anionic polymerization in the thermoplastic RTM-process - An overview
Wilhelm, Michael; Wendel, Rainer | Conference Paper |
| 2018 | Molecular dynamics simulation of tensile tests at a curved binder-particle interface
Nardai, Michael M.; Bohn, Manfred A. | Conference Paper |
| 2018 | Molecularly imprinted polymers for detection of explosives In gas phase approach for the detection of TNT in cargo containers
Heil, Moritz | Conference Paper |
| 2018 | Multi-objective patch optimization with integrated kinematic draping simulation for continuous-discontinuous fiber-reinforced composite structures
Fengler, Benedikt; Kärger, Luise; Henning, Frank; Hrymak, Andrew | Journal Article |
| 2018 | Multifunktionelle medizinische Sonde
Eckl, Wilhelm; Schmid, Helmut; Scholz, Peter | Patent |
| 2018 | Nanomaterialien für elektrische Energiespeicher
Calgar, Burak; Fischer, Peter; Hagen, Markus; Tübke, Jens; Althues, Holger; Dörfler, Susanne; Guntow, Uwe; Schulz, Jochen; Endler, Ingolf; Fritsch, Marco; Meißner, Frank; Wolter, Mareike | Book Article |
| 2018 | A new algorithm to determine geometric properties of propellant grains from computer tomographic images
Wurster, Sebastian; Sprengel, David | Conference Paper |
| 2018 | New battery technologies for electric vehicles - What will we see on the road?
Tübke, J. | Conference Paper |
| 2018 | Nir-flare compositions basing on hot water band emission
Roth, Evelin; Weiser, Volker; Lity, Andre; Raab, Angelika; Kelzenberg, Stefan | Conference Paper |
| 2018 | Nonlinear hyperviscoelastic modelling of intra-ply deformation behaviour in finite element forming simulation of continuously fibre-reinforced thermoplastics
Dörr, D.; Henning, F.; Kärger, L. | Journal Article |
| 2018 | A novel differential electrochemical mass spectrometry method to determine the product distribution from parasitic Methanol oxidation reaction on oxygen reduction reaction catalysts
Jurzinsky, T.; Kurzhals, P.; Cremers, C. | Journal Article |
| 2018 | Novel N-phosphorylated iminophosphoranes based on 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide
Weinert, Michael; Fuhr, Olaf; Döring, Manfred | Journal Article |
| 2018 | Numerical and experimental investigation of manufacturing and performance of metal inserts embedded in CFRP
Muth, M.; Schwennen, J.; Bernath, A.; Seuffert, J.; Weidenmann, K.A.; Fleischer, J.; Henning, F. | Journal Article |
| 2018 | Numerische Modellierung einer selbsterhaltenden Hochtemperatursynthese von nano-strukturierten Bor-Partikeln
Heger, Patrick
: Pietsch, Erik (Betreuer); Teipel, Ulrich (Erstkorrektor); Ranong, Chakkrit (Zweitkorrektor) | Master Thesis |
| 2018 | Ölverbrauchsmessung an einem Abgasturbolader mit einem Flammenionisationsdetektor am Heißgasprüfstand
Dietrich, Simon | Bachelor Thesis |
| 2018 | On the scale-up of metal-organic frameworks using microreaction technology
Polyzoidis, Angelos | Dissertation |
| 2018 | Optical properties of filled polymeric composite materials from near infrared spectroscopy
Becker, Wolfgang; Sachsenheimer, K.; Roth, Evelin; Knapp, Sebastian; Weiser, Volker | Conference Paper |
| 2018 | Optimierte Emulsions- und Partikelerzeugung in mikrofluidischen Strukturen
Winter, Yannik | Master Thesis |
| 2018 | Optimization of the biogas process by delignification of the feed and separation of volatile fatty acids during the process
Jänisch, Thorsten | Presentation |
| 2018 | Oxidation of manganese and decomposition of MnO2
Kelzenberg, Stefan; Eisenreich, Norbert; Knapp, Sebastian; Koleczko, Andreas; Schuppler, Heike | Conference Paper |
| 2018 | Partikeltechnologie
Teipel, U.; Türk, M. | Journal Article |
| 2018 | Polymerbasierte Nanokomposite
Diemert, Jan; Hübner, Christof; Hartwig, Andreas; Laschewsky, Andre | Book Article |
| 2018 | Preconcentration of Nitroalkanes with Archetype Metal–Organic Frameworks (MOFs) as Concept for a Sensitive Sensing of Explosives in the Gas Phase
Rieger, M.; Wittek, M.; Scherer, P.; Löbbecke, S.; Müller-Buschbaum, K. | Journal Article |
| 2018 | Principles of ageing of double base propellants and its assessment by several methods following propellant properties
Bohn, Manfred A. | Conference Paper |
| 2018 | Printed explosives standards for the evaluation of stand-off optical systems
Schnürer, F.; Ulrich, C.; Müller, S.; Schweikert, W. | Conference Paper |
| 2018 | Process comparison on the microstructure and mechanical properties of fiber-reinforced polyphenylene sulfide using MuCell technology
Lohr, C.; Beck, B.; Henning, F.; Weidenmann, K.A.; Elsner, P. | Journal Article |
| 2018 | Product design of ADN-PRILLS for applications in solid propellants
Heintz, Thomas; Leisinger, Karlfred; Reinhardt, Werner; Heil, Moritz; Herrmann, Michael | Conference Paper |
| 2018 | Prozessentwicklung für den Einsatz neuer Prototyping Technologien in der Entwicklung
Kübler, Maximilian Stephan
: Heilmaier, Martin (Betreuer); Hanemann, Thomas (Betreuer); Reuter, Steffen (Betreuer) | Bachelor Thesis |
| 2018 | Prozesstechnik zur Altholzaufbereitung
Eisenlauer, M.; Graf, H.; Teipel, U. | Journal Article |
| 2018 | Rare earths and the balance problem: How to deal with changing markets?
Binnemans, Koen; Jones, Peter Tom; Müller, Torsten; Yurramendi, Lourdes | Journal Article |
| 2018 | Reaction between azide molecule with hydroxyl terminated polybutadiene
Ferrapontoff Lemos, Mauricio; Dörich, Manuela; Keicher, Thomas; Bohn, Manfred A.; Mendes, C. | Conference Paper |
| 2018 | Recycled polyethylene terephthalate/carbon nanotube composites with improved processability and performance
Chowreddy, Ravindra Reddy; Nord-Varhaug, Katrin; Rapp, Florian | Journal Article |
| 2018 | Redox-Flow-Zelle und Verfahren zu deren Herstellung
Noack, Jens; Pinkwart, Karsten; Rumpel, Georg; Tübke, Jens | Patent |
| 2018 | Reducing load in air transportation
Joppich, Tobias; Menrath, Andreas; Wippo, Verena; Baumgärtner, Sebastian; Huber, Timo | Journal Article |
| 2018 | Reproducible generation of explosive traces for detection system testing
Wittek, M.; Röseling, D.; Schnürer, F.; Heintz, T.; Dresel, A.; Wegener, T.; Schmäh, M. | Conference Paper |
| 2018 | A review of electrolyte additives and impurities in vanadium redox flow batteries
Cao, L.; Skyllas-Kazacos, M.; Menictas, C.; Noack, J. | Journal Article |
| 2018 | Rheological studies on gas-laden and long glass fiber reinforced polypropylene through an inline high pressure capillary rheometer in the injection molding process
Lohr, C.; Dieterle, S.; Menrath, A.; Weidenmann, K.A.; Elsner, P. | Journal Article |
| 2018 | Risikoanalyse und Entwicklung eines Sicherheitskonzeptes für eine Hochdruckversuchsanlage zur Abbrandcharakterisierung von Raketenfesttreibstoffen
Wachter, Laura | Master Thesis |
| 2018 | RoBEMM - Robotische Unterwasser-Bergungs und Entsorgungsverfahren inklusive Technik zur Delaboration von Munition im Meer, insbesondere Im Küsten- und Flachwasserbereich
Abbondanzieri, M.; Klein, T.; Frey, T.; Müller, P. | Conference Paper |
| 2018 | Sensitivity reduction of the CL-20/HMX cocrystal via advanced crystallization process
Herrmannsdörfer, Dirk; Herrmann, Michael; Heintz, Thomas | Conference Paper |
| 2018 | Separation of volatile fatty acids (VFA) formed during the biogas process - OPTIGÄR
Jänisch, Thorsten | Presentation |
| 2018 | Simulation of reinforced reactive injection molding with the finite volume method
Wittemann, Florian; Märtens, Robert; Bernarth, Alexander; Hohberg, Martin; Kärger, Luise; Henning, Frank | Journal Article |
| 2018 | Small object low-velocity impact damage on hybrid sandwich structures with CFRP face sheets and aluminum foam cores
Rupp, P.; Elsner, P.; Weidenmann, K.A. | Journal Article |
| 2018 | Steam oxidation of aluminide coatings under high pressure and for long exposures
Boulesteix, C.; Kolarik, V.; Pedraza, F. | Journal Article |
| 2018 | Studie zur oxidativen Konversion von Lignin zu polyfunktionellen Oligomeren und konstruktive Technikfolgenabschätzung eines entsprechenden Prozessmoduls
Reinhardt, Sebastian | Master Thesis |
| 2018 | Sulfides and Disulfides of S-Triazine and S-Heptazine: Flame Retardancy
Höhne, Carl-Christoph; Posern, Christian; Böhme, Uwe; Kroke, Edwin | Poster |
| 2018 | Sulfides and disulfides of s-Triazine: Potential thermal thiyl radical generators
Höhne, Carl-Christoph; Posern, Christian; Böhme, Uwe; Kroke, Edwin | Journal Article |
| 2018 | Synthesis of metal-organic frameworks for energetic applications
Piscopo, Calogero Giancarlo; Polyzoidis, Angelos; Schwarzer, M.; Boskovic, D.; Löbbecke, Stefan | Conference Paper |
| 2018 | Tensile test of HMX/HTPB macro-composites
Herrmann, Michael; Kronis-Rudigier, Gunnar | Conference Paper |
| 2018 | Testtailoring
Cäsar, Joachim | Conference Paper |
| 2018 | Theoretical analysis and experimental investigation of material compatibility between refrigerants and polymers
Eyerer, S.; Eyerer, P.; Eicheldinger, M.; Tübke, B.; Wieland, C.; Spliethoff, H. | Journal Article |
| 2018 | Thermal characterization of naturally aged gun and rocket propellants
Heil, Moritz; Hickmann, J. | Conference Paper |
| 2018 | Titania supported on silica as an efficient catalyst for deep oxidative desulfurization of a model fuel with exceptionally diluted H2O2
Piscopo, C.G.; Tochtermann, J.; Schwarzer, M.; Boskovic, D.; Maggi, R.; Maestri, G.; Loebbecke, S. | Journal Article |
| 2018 | Untersuchung der Eignung von thermoplastischem Cellulosepropionat zur Aufschäumung im kontinuierlichen Schaumextrusionsprozess
Rapp, Florian
: Elsner, Peter; Altstädt, Volker | Dissertation |
| 2018 | Untersuchung der Möglichkeiten zur Reibungsreduzierung verbrennungsmotorischer Steuertriebe durch pneumatische Ventilfedern
Hartweg, Matthias
: Gumbsch, P.; Koch, T. | Dissertation |
| 2018 | Untersuchung und Optimierung einer Eisen-basierten Redox-Flow-Batterie
Wernado, Mike
: Silva, Pedro (Betreuer); Noack, Jens (Betreuer) | Bachelor Thesis |
| 2018 | Use of supercritical CO2 (scCO2) as extraction agent and reaction solvent
Jänisch, Thorsten | Presentation |
| 2018 | Verfahren und Vorrichtung zur Herstellung von mit einer Tragstruktur versehenen Polymer-Formteilen
Baumgärtner, Sebastian; Huber, Timo | Patent |
| 2018 | Weniger Last beim Lufttransport
Joppich, Tobias; Menrath, Andreas; Wippo, Verena; Baumgärtner, Sebastian; Huber, Timo | Journal Article |
| 2018 | Wirksame Methoden zur UV-Stabilisierung von Polymer-Oberflächen im Außenbereich
Schmid, Helmut; Becker, Wolfgang; Knapp, Sebastian; Koleczko, Andreas | Conference Paper |
| 2018 | WITHDRAWN: "Nonlinear hyperviscoelastic modelling of intra-ply deformation behaviour in finite element forming simulation of continuously fibre-reinforced thermoplastics" [Composites Part A: Applied Science and Manufacturing 109 (2018) 585-596]
Dörr, D.; Henning, F.; Kärger, L. | Journal Article |
| 2017 | ADN-Prills: Particle properties, stability and sensitivity
Heintz, Thomas; Reinhard, Werner; Leisinger, Karlfred; Herrmann, Michael; Heil, Moritz | Conference Paper |
| 2017 | Advanced molds and methods for the fundamental analysis of process induced interface bonding properties of hybrid, thermoplastic composites
Joppich, T.; Menrath, A.; Henning, F. | Journal Article, Conference Paper |
| 2017 | Ageing of surface coated powders investigated by imaging spectroscopy
Pontius, Heike; Dörich, Manuela; Heil, Moritz | Conference Paper |
| 2017 | Aging behavior of ADN solid rocket propellants and their glass-rubber transition characteristics
Bohn, M.A.; Cerri, S. | Book Article |
| 2017 | Aging of standard and insensitive RDX crystals investigated by means of X-ray diffraction
Herrmann, Michael; Förter-Barth, Ulrich; Bohn, Manfred; Borne, Lionel | Journal Article |
| 2017 | Ammonium dinitramide/glycidyl azide polymer (ADN/GAP) composite propellants with and without metallic fuels
Gettwert, V.; Franzin, A.; Bohn, M.A.; DeLuca, L.T.; Weiser, V. | Journal Article |
| 2017 | Anion intercalation into a graphite cathode from various sodium-based electrolyte mixtures for dual-ion battery applications
Aladinli, Sinan; Bordet, François; Ahlbrecht, Katharina; Tübke, Jens; Holzapfel, Michael | Journal Article |
| 2017 | Application of eco-efficiency analysis to assess three different recycling technologies for carbon fiber reinforced plastics (CFRPs)
Dieterle, M.; Seiler, E.; Viere, T. | Conference Paper |
| 2017 | Arylthio- and Arylseleno-Substituted s-Heptazines
Posern, Christian; Böhme, Uwe; Wagler, Jörg; Höhne, Carl-Christoph; Kroke, Edwin | Journal Article |
| 2017 | Aus einem anderen Blickwinkel
Henning, Frank; Thoma, Bernd; Wendel, Rainer; Rosenberg, Philipp; Gresser, Götz; Bauder, Hans-Jürgen; Wolfrum, Jürgen; Caliskan, Metin | Journal Article |
| 2017 | Aus einem anderen Blickwinkel: ORW-Verfahren ermöglicht multiaxiale lokale Verstärkung für RTM-Strukturbauteile
Henning, Frank; Thoma, Bernd; Wendel, Rainer; Rosenberg, Philipp; Gresser, Götz; Bauder, Hans-Jürgen; Wolfrum, Jürgen; Caliskan, Metin | Journal Article |
| 2017 | Automatisierung eines Prüfstands zur Validierung von Dichtsystemen für Redox-Flow-Batterien
Ekinci, Ismet | Bachelor Thesis |
| 2017 | Beitrag zur Konsolidierung von thermoplastischen Hochleistungsfaserverbundwerkstoffen
Baumgärtner, Sebastian
: Henning, F.; Drummer, D. | Dissertation |
| 2017 | A benchmark study of finite element codes for forming simulation of thermoplastic UD-tapes
Dörr, D.; Brymerski, W.; Ropers, S.; Leutz, D.; Joppich, T.; Kärger, L.; Henning, F. | Journal Article, Conference Paper |
| 2017 | Burning Behavior of ADN-Based Propellants Loaded with Al-Mg Mechanically Activated Powders
Cristilli, Francesco | Master Thesis |
| 2017 | Catalytic oxidation of HTC-waste water in super critical H2O
Jänisch, Thorsten; Graf, Jürgen; Tübke, Beatrice; Pohsner, Ute; Böringer, Sarah | Poster |
| 2017 | Catalytic oxidation of HTC-waste water in supercritical H2O
Jänisch, Thorsten | Conference Paper |
| 2017 | Chapter 2: Bio-Fiber Thermoset Composites
Rajpurohit, A.; Henning, F. | Book Article |
| 2017 | Characterization of aging behavior of butacene® based composite propellants by loss factor curves
Seyidoglu, T.; Bohn, M.A. | Journal Article |
| 2017 | Characterization of gun propellants by long-term mass loss measurements
Heil, Moritz; Wimmer, Ann-Kathrin; Bohn, Manfred A. | Journal Article |
| 2017 | Characterization of the interlaminar shear strength of fibre metal laminates with reactively processed thermoplastic matrix
Werner, H.; Sönmez, I.; Wendel, Rainer; Weidenmann, K.; Henning, Frank | Conference Paper |
| 2017 | A comb-like ionomer based on poly(2,6-dimethyl-1,4-phenylene oxide) for the use as anodic binder in anion-exchange membrane direct methanol fuel cells
Jurzinsky, T.; Bär, R.; Heppe, N.; Cremers, C.; Tübke, J. | Journal Article |
| 2017 | Combustion Behavior of a Metallized ADN/GAP Propellant as a Function of the Aluminum Content and the Binder/Oxidizer Ratio
Imiolek, Andreas; Weiser, Volker; Tagliabue, C.; Gettwert, Volker | Conference Paper |
| 2017 | Combustion behavior of aluminum particles in ADN/GAP composite propellants
Weiser, Volker; Franzin, Andrea; DeLuca, Luigi; Fischer, Sebastian; Gettwert, Volker; Kelzenberg, Stefan; Knapp, Sebastian; Raab, A.; Roth, Evelin; Eisenreich, Norbert | Book Article |
| 2017 | Comminution of biogenic materials
Eisenlauer, M.; Teipel, U. | Journal Article |
| 2017 | Comparison of filler-dependent mechanical properties of jute fiber reinforced sheet and bulk molding compound
Lautenschläger, Miriam | Conference Paper |
| 2017 | Comparison of kinetics, oxide crystal growth and diffusivities of nano- and micrometer-sized copper particles on oxidation in air
Eisenreich, Norbert; Schulz, Olga; Koleczko, Andreas; Knapp, Sebastian | Journal Article |
| 2017 | Comparison of methods for generating the CL-20/HMX-cocrystal
Herrmannsdörfer, Dirk; Herrmann, Michael; Heintz, Thomas | Conference Paper |
| 2017 | Compositional graphitic cathode investigation and structural characterization tests for Na-based dual-ion battery applications using ethylene carbonate:ethyl methyl carbonate-based electrolyte
Aladinli, Sinan; Bordet, François; Ahlbrecht, Katharina; Tübke, Jens; Holzapfel, Michael | Journal Article |
| 2017 | The connection between WLF equation and the Arrhenius equation
Bohn, Manfred A. | Conference Paper |
| 2017 | Continuous synthesis of UiO-66 in microreactor: Pursuing the optimum between intensified production and structural properties
Polyzoidis, A.; Schwarzer, M.; Loebbecke, S.; Piscopo, C.G. | Journal Article |
| 2017 | Correlation of high explosive properties with plate dent test results for different geometries
Schrabback, M.; Materna, Miriam | Conference Paper |
| 2017 | Corrosion of carbon supports, induced by high-temperature PEMFC operating conditions
Rau, M.; Jung, F.; Cremers, C.; Tübke, J. | Conference Paper |
| 2017 | D 5.1 LCA for REE and Mg Recovery Technologies
Salles, Ana
: Sgarito, Serena; Forte, Federica; Yurramendi, Lourdes Sarasola | Report |
| 2017 | D 5.2 Magnesium Recycling LCA
González, Manuel
: Val, Diego; Araujo, Blanca; Rodriguez, Alicia; Maroto, Jose Antonio; Salles, Ana; Müller, Torsten | Report |
| 2017 | D 6.6 PEDR Plan for the Exploitation and Dissemination of Results Mid Project Report
Lagioia, Rocco
: Müller, Torsten; Araujo, Blanca | Report |
| 2017 | D1.1 Definition of the starting situation in URBANREC regions
: Hannich, Ronny | Report |
| 2017 | D2.3. Mg recycling test unit
Val, Diego
: Val, Diego; Rodriguez, Alicia; Araujo, Blanca | Report |
| 2017 | Darstellung der Eigenschaften von technisch genutztem Balsaholz und daraus resultierende Verwertungsrouten für End-of-Life-Material von Rotorblättern aus Windkraftanlagen.
Sprengel, Lukas | Report |
| 2017 | Detection of Black Plastics in the Middle Infrared Spectrum (MIR) Using Photon Up-Conversion Technique for Polymer Recycling Purposes
Becker, Wolfgang; Sachsenheimer, K.; Klemenz, Melanie | Journal Article |
| 2017 | Development and optimization of the alloying process
Rodriguez, Alicia
: Araujo, Blanca; González, Manuel; Maroto, Jose Antonio; Val, Diego; García, Jose Manuel; Müller, Torsten; Lagioia, Rocco | Report |
| 2017 | Different polymorphic states of Explosives - A problem of trace detection for inkjet-printed samples
Schweikert, Wenka; Ulrich, Christian; Müller, Stefan; Schnürer, Frank | Conference Paper |
| 2017 | A direct process to reuse dry fiber production waste for recycled carbon fiber bulk molding compounds
Saburow, O.; Huether, J.; Maertens, R.; Trauth, A.; Kechaou, Y.; Henning, F.; Weidenmann, K.A. | Journal Article, Conference Paper |
| 2017 | Effect of mechanical treatment on properties of zeolites with chabazite structure
Buzimov, A.Y.; Kulkov, S.N.; Eckl, W.; Pappert, S.; Gömze, L.A.; Kurovics, E.; Kocserha, I.; Geber, R. | Conference Paper |
| 2017 | Eigenschaftsänderungen von Prüfstäuben durch mechanische Beanspruchung
Teipel, Ulrich; Henning, Frank; Cäsar, Markus | Conference Paper |
| 2017 | Entwicklung einer Methodik zur quantitativen Analyse von mit dem AKF-Verfahren erzeugten Polymertropfen und Anwendung in Parameterstudie
Unger, Nicolas | Master Thesis |
| 2017 | Entwicklungsperspektiven für Zellformate von Lithium-Ionen-Batterien in der Elektromobilität
Hettesheimer, Tim; Thielmann, Axel; Neef, Christoph; Möller, Kai-Christian; Wolter, Mareike; Lorentz, Vincent; Gepp, Markus; Wenger, Martin; Prill, Torben; Zausch, Jochen; Kitzler, Peter; Montnacher, Joachim; Miller, Martin; Hagen, Markus; Fanz, Patrik; Tübke, Jens | Study |
| 2017 | Evaluation of ballistic modifier for aluminized ADN/PSAN propellants
Tagliabue, C.; Imiolek, A.; Gettwert, V.; Weiser, V. | Conference Paper |
| 2017 | Evaluation of concentration, type and particle size of fillers on the dynamic mechanical behaviour of elastomeric HTPB binder
Bohn, Manfred A.; Lemos, Mauricio Ferrapontoff; Mußbach, Günter | Conference Paper |
| 2017 | Evaluation of filler effects on the dynamic mechanical behavior of HTPB-elastomer used as binder in exemplary composite formulations
Lemos, M.F.; Mussbach, G.; Bohn, M.A. | Journal Article |
| 2017 | Evaluation of the James Initiation Criterion in the 21mm and 50mm PMMA Gap Test
Wurster, S. | Journal Article |
| 2017 | Experimentelle Charakterisierung von Designvarianten überlappend gefügter Kohlenstofffaserverbundstrukturen im Kontext der Entwicklung neuartiger Drapiertechnologien
Fürst, Tobias
: Henning, F.; Mitschang, P. | Dissertation |
| 2017 | Flexible und dichte keramische Verbundseparatoren für Na-S-Mitteltemperaturzellen
Ahlbrecht, Katharina
: Hoffmann, M.J.; Tübke, J. | Dissertation |
| 2017 | Following the curing of isocyanate-polyol by pressure decrease - influences of activation volume, reaction volume and change in bulk compressibility as well as diffusion control during curing
Bohn, Manfred A. | Conference Paper |
| 2017 | Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2016/2017
| Annual Report |
| 2017 | Funktionsintegrierter Leichtbau
Henning, Frank; Karcher, Michael; Kärger, Luise; Müller, Timo | Book Article |
| 2017 | Hexaphenoxycyclotriphosphazene as FR for CFR anionic PA6 via T-RTM: A study of mechanical and thermal properties
Höhne, Carl-Christoph; Wendel, Rainer; Käbisch, Bert; Anders, Thorsten; Henning, Frank; Kroke, Edwin | Journal Article |
| 2017 | A holistic approach to use multi-scale fractions of dry carbon fibre production waste in filled bulk moulding compounds (BMC)
Huether, J.; Maertens, R.; Saburow, O.; Seiler, E.; Aicher, T.; Weidenmann, K.A. | Conference Paper |
| 2017 | Hollow microsphere collapse sensitization of emulsion explosives - modeling and experimental results
Pimenta, J.; Quaresma, J.; Campos, J.; Deimling, Lukas; Keicher, Thomas | Conference Paper |
| 2017 | Hydrogen oxidation reaction under HT-PEMFCs conditions: Inhibition due to fuel contaminants
Rau, M.; Jung, F.; Cremers, C. | Conference Paper |
| 2017 | Impact of HP-RTM Process Parameters on Mechanical Properties with Epoxy and Polyurethane Systems
Swentek, I.; Beck, B.; Ugresic, V.; Potyra, T.; Henning, F. | Journal Article |
| 2017 | Implementierung & Untersuchung von Aptamer-Modifizierten Dickschichtelektroden zur Elektrochemischen Detektion von Kokain
Diebold, Verena | Master Thesis |
| 2017 | The influence of concentration, type and particle size of fillers on the dynamic mechanical behaviour of elastomeric HTPB binder
Bohn, Manfred A. | Conference Paper |
| 2017 | Influence of mechanical activation on the properties of natural zeolites from Tokaj Mountain
Buzimov, A.Y.; Kulkov, S.N.; Kurovics, E.; Eckl, W.; Pappert, S. | Conference Paper |
| 2017 | Influence of mixing ratio on the reaction behavior of ternary thermits
Roth, Evelin; Weiser, Volker; Lity, André; Raab, A. | Conference Paper |
| 2017 | Influence of the manufacturing process (comparison MuCell and Direct-LFT) of foamed and fiber reinforced polymer sandwich structures on the fiber length
Lohr, C.; Menrath, A.; Elsner, P.; Weidenmann, K.A. | Conference Paper |
| 2017 | Influence of the slurry thickness and heat treatment parameters on the formation of aluminium diffusion coating
Bermejo Sanz, Jorge; Roussel Garcia, Raquel; Kolarik, Vladislav; Lorenzo, Maria del Mar Juez | Journal Article |
| 2017 | Influence of water during manufacturing of APA6 in the thermoplastic RTM process
Wendel, Rainer; Thoma, Bernd; Henning, Frank | Conference Paper |
| 2017 | Injection molding of glass fiber reinforced polypropylene composite foams with laminate skins
Kasemphaibulsuk, P.; Holzner, M.; Kuboki, T.; Hrymak, A. | Conference Paper |
| 2017 | Intrinsic Flammability of Polyurethane Flexible Foams
Höhne, Carl-Christoph; Hanich, Ronny; Kroke, Edwin | Poster |
| 2017 | Investigation and comparison of known and new ADN stabilizers
Heil, Moritz; Müller, C.; Hickmann, J.; Bohn, Manfred A. | Conference Paper |
| 2017 | Investigation of ageing behaviour of plasticised nitrocellulose - accelerated ageing and real ageing
Bohn, Manfred A. | Conference Paper |
| 2017 | Investigation of extinguished ADN/HTPB propellants with a special focus on sub-surface reactions
Weiser, Volker; Christilli, F.; Gettwert, Volker; Imiolek, Andreas; Kröber, Hartmut; Tagliabue, C. | Conference Paper |
| 2017 | Investigation of the matrix influence on the laminate properties of epoxy- and polyurethane-based CFRPs manufactured with HP-RTM-process
Behnisch, F.; Rosenberg, P.; Weidenmann, A.K.; Henning, F. | Conference Paper |
| 2017 | Investigation of the wetting behavior of Na and Na alloys on uncoated and coated Na-beta"-alumina at temperatures below 150 A degrees C
Ahlbrecht, K.; Bucharsky, C.; Holzapfel, M.; Tübke, J.; Hoffmann, M.J. | Journal Article |
| 2017 | Kalibrierung von Temperatur- und Klimaprüfschränken
Cäsar, Joachim | Conference Paper |
| 2017 | Luftschadstoffe im Innen- und Außenbereich - Problembeschreibung und Lösungsansätze
Schmid, Helmut; Koleczko, Andreas; Knapp, Sebastian | Conference Paper |
| 2017 | A macroscopic approach to simulate the forming behaviour of stitched unidirectional non-crimp fabrics (UD-NCF)
Schirmaier, F.J.; Dörr, D.; Henning, F.; Kärger, L. | Journal Article |
| 2017 | Material compatibility of ORC working fluids with polymers
Eyerer, S.; Eyerer, P.; Eicheldinger, M.; Sax, S.; Wieland, C.; Spliethoff, H. | Journal Article, Conference Paper |
| 2017 | Material properties of electrodes for photovoltaic-coupled polymer electrolyte membrane water electrolysis
Baumann, Nils
: Stelter, M.; Tübke, J. | Dissertation |
| 2017 | Material selection for CFRP-aluminium-foam-sandwiches manufactured by a PUR spraying process
Rupp, P.; Elsner, P.; Weidenmann, K.A. | Conference Paper |
| 2017 | Mechanical properties of Desmophen-2200® based elastomer samples plasticized with energetic ionic liquids
Lemos, M.F.; Bohn, Manfred A.; Schaller, Uwe | Conference Paper |
| 2017 | Medium-temperature molten sodium batteries with aqueous bromine and iodine cathodes
Holzapfel, M.; Wilde, D.; Hupbauer, C.; Ahlbrecht, K.; Berger, T. | Journal Article |
| 2017 | Mg+REE alloying process test unit
Val, Diego
: Val, Diego; Araujo, Blanca; Rodriguez, Alicia; García, Jose Manuel | Report |
| 2017 | Microwave energy assisted synthesis of poly lactic acid via continuous reactive extrusion: Modelling of reaction kinetics
Dubey, S.P.; Abhyankar, H.A.; Marchante, V.; Brighton, J.L.; Bergmann, B.; Trinh, G.; David, C. | Journal Article |
| 2017 | Modeling and validation of gripper induced membrane forces in finite element forming simulation of continuously reinforced composites
Poppe, C.; Joppich, T.; Dörr, D.; Kärger, L.; Henning, F. | Conference Paper |
| 2017 | Modeling of the non-isothermal crystallization kinetics of polyamide 6 composites during thermoforming
Kugele, D.; Dörr, D.; Wittemann, F.; Hangs, B.; Rausch, J.; Kärger, L.; Henning, F. | Conference Paper |
| 2017 | Modeling, simulation and characterization of complex shaped solid propellant combustion
Wurster, S. | Journal Article |
| 2017 | Modelling of Thermite Mixtures
Knapp, Sebastian; Eisenreich, Norbert; Kelzenberg, Stefan; Roth, Evelin; Weiser, Volker | Conference Paper |
| 2017 | Möglichkeiten der Verfahrensintensivierung von reaktiven Extrusionen am Beispiel der Herstellung von Polylactid
Bergmann, Björn
: Elsner, P.; Teipel, U. | Dissertation |
| 2017 | New benchmark in the tailored blank manufacturing - high volume production in an exceptional quality
Graf, Matthias; Baumgärtner, Sebastian; Henning, Frank | Conference Paper |
| 2017 | Nitrocellulose and stabilizers: DFT calculations of bond dissociation and reactions
Nardai, Michael M.; Bohn, Manfred A. | Conference Paper |
| 2017 | Nitrocellulose decomposition quantum mechanical calculations
Nardai, Michael M.; Bohn, Manfred A. | Conference Paper |
| 2017 | Non-destructive characterization of fiber orientation in reinforced SMC as input for simulation based design
Schladitz, Katja; Büter, Andreas; Godehardt, Michael; Wirjadi, Oliver; Fleckenstein, Johanna; Gerster, Tobias; Hassler, Ulf; Jaschek, Katrin; Maisl, Michael; Maisl, Ute; Mohr, Stefan; Netzelmann, Udo; Potyra, Tobias; Steinhauser, Martin O. | Journal Article |
| 2017 | On the relevance of modeling viscoelastic bending behavior in finite element forming simulation of continuously fiber reinforced thermoplastics
Dörr, D.; Schirmaier, F.J.; Henning, F.; Kärger, L. | Conference Paper |
| 2017 | Oxidation of La-Sr-Mn-coated interconnector alloys for steam electrolysis under pressure in pure oxygen and in pure steam
Lorenzo, Maria del Mar Juez; Kolarik, Vladislav; Kuchenreuther-Hummel, Veronika; Pötschke, Martin; Schimanke, Danilo | Journal Article |
| 2017 | Phenomena in combustion of propellants and explosives
: Koleczko, Andreas; Eisenreich, Norbert; Vorozhtsov, Alexander B. | Book |
| 2017 | Polymerelektrolyt-Brennstoffzellensystem für ein autonomes Unterwasserfahrzeug
Hitscherich, Manuel
: Stolten, D.; Scherer, V. | Dissertation |
| 2017 | Positive weathering results as milestones in the development of thermochromic nanocoatings
Schmid, Helmut | Conference Paper |
| 2017 | Production and comparison of artificially aged microplastic particles
Patzak, Carolin; Reichert, Thomas; Forberger, Jens | Conference Paper |
| 2017 | Produktgestaltung in der Partikeltechnologie. Bd.8
: Teipel, Ulrich; Türk, Michael | Conference Proceedings |
| 2017 | Prozesskette zur Herstellung textiler 3D-Preforms: Einsatz der Tufting- und Partikelschaumtechnologie zur sequenziellen Umformung textiler Halbzeuge
Schöfer, S.; Schmitz, M.; Gries, T.; Mack, C.; Basler, A. | Journal Article |
| 2017 | Pull-out testing of multiscale structured metallic z-reinforcements for CFRP laminates
Juergens, M.; Hafe Pérez Ferreira da Silva, M.T. von; Heimbs, S.; Lang, H.; Ladstaetter, E.; Hombergsmeier, E. | Journal Article |
| 2017 | Quantitative kinetic analysis of a PdAu3 alloy catalyst for oxygen electro-reduction
Kurnatowski, Martin von; Bortz, Michael; Klein, Peter; Kintzel, Birgit; Cremers, Carsten | Journal Article |
| 2017 | The REACH impact on gun propellant formulations
Böhnlein-Mauß, Jutta; Kröber, Hartmut | Journal Article |
| 2017 | Real-time spectroscopy enabled by external cavity QCLs with MOEMS diffraction gratings
Butschek, Lorenz; Hugger, Stefan; Jarvis, Jan-Philip; Härtelt, Marko; Merten, André; Grahmann, Jan; Boskovic, Dusan; Fuchs, Frank; Ostendorf, Ralf; Schilling, Christian; Rattunde, Marcel; Wagner, Joachim | Conference Paper |
| 2017 | REE recovery technology demonstrator
Sgarioto, Serena; Lagioia, Rocco; Claudia, Ana
: Müller, Torsten | Report |
| 2017 | Remarks on the Evolution of Explosives
Homburg, A. | Journal Article |
| 2017 | Revealing the initial reaction behavior in the continuous synthesis of metal-organic frameworks using real-time synchrotron X-ray analysis
Polyzoidis, Angelos; Etter, Martin; Herrmann, Michael; Löbbecke, Stefan; Dinnebier, Robert E. | Journal Article |
| 2017 | Rheological In-Mold Measurements and Characterizations of Sheet-Molding-Compound (SMC) Formulations with Different Constitution Properties by Using a Compressible Shell Model
Hohberg, Martin; Kärger, Luise; Bücheler, David; Henning, Frank | Journal Article |
| 2017 | The role of phosphate additive in stabilization of sulphuric-acid-based vanadium(V) electrolyte for all-vanadium redox-flow batteries
Roznyatovskaya, Nataliya V.; Roznyatovsky, Vitaly A.; Höhne, Carl-Christoph; Fühl, Matthias; Gerber, Tobias; Küttinger, Michael; Noack, Jens; Fischer, Peter; Pinkwart, K.; Tübke, J. | Journal Article |
| 2017 | Safety-related design of the process chain for a robotic recovery and disposal process from ammunition and explosives handling to disposal
Müller, Paul; Keßler, Armin | Conference Paper |
| 2017 | Scaling of magnesium recycling and alloying procedures
Val, Diego
: Val, Diego; Araujo, Blanca; Rodriguez, Alicia; García, Jose Manuel | Report |
| 2017 | Simulation of the influence of embedded inserts on the RTM filling behavior considering local fiber structure
Seuffert, J.; Kärger, L.; Henning, F. | Conference Paper |
| 2017 | Solid propellant burn rate measurement in a micro closed bomb
Wurster, S. | Conference Paper |
| 2017 | Solid-liquid adhesion energies of composite propellant components determined by solution calorimetry
Nardai, Michael M.; Bohn, Manfred A. | Journal Article |
| 2017 | Subcop - protection against suicide bomber attacks
Bernewitz, Johanna; Armbrust, Torsten; Hummel, Marc; Klemenz, Melanie; Neutz, Jochen; Roussel Garcia, Raquel | Conference Paper |
| 2017 | Supported IrxRu1-xO2 anode catalysts for PEM-water electrolysis
Baumann, Nils; Cremers, Carsten; Pinkwart, Karsten; Tübke, Jens | Journal Article, Conference Paper |
| 2017 | Synthesis of P(GAP-CO-EPH) - an energetic copolyether suitable for cast-cure applications
Hafner, Sven; Keicher, Thomas | Conference Paper |
| 2017 | Thermal behavior of ADN & ADN prills - crystal and micro structure. Part I
Herrmann, Michael; Förter-Barth, Ulrich; Kempa, Paul-Bernd; Heintz, Thomas | Conference Paper |
| 2017 | Thermal characterization of polyurethane foams with phase change material
Amaral, C.; Vicente, R.; Eisenblätter, J.; Marques, P.A.A.P. | Journal Article |
| 2017 | Turbidimetric method for the determination of particle sizes in polypropylene/clay-composites during extrusion
Becker, Wolfgang; Guschin, Viktor; Mikonsaari, Irma; Teipel, Ulrich; Kölle, Sabine; Weiss, Patrick | Journal Article |
| 2017 | Untersuchung des Einflusses von mineralischen Additiven auf die mechanischen Eigenschaften von Polylactid
Peters, Jenny
: Holzer, Andrei (Betreuer); Winkelmann, Felix (Gutachter) | Bachelor Thesis |
| 2017 | Untersuchungen an Anodenmaterialien für die Alkalische Direkt-Methanol-Brennstoffzelle
Jurzinsky, Tilman
: Elsner, P.; Roth, C. | Dissertation |
| 2017 | Vanadium proton exchange membrane water electrolyser
Noack, J.; Roznyatovskaya, N.; Pinkwart, K.; Tübke, J. | Journal Article |
| 2017 | Verfahren und Vorrichtung zur Konsolidierung von imprägnierten Faserverbundstrukturen
Baumgärtner, Sebastian; Henning, Frank; Lohr, Christoph | Patent |
| 2017 | Verfahren und Vorrichtung zur Prüfung der Staubdichtigkeit und / oder des Staubadsorptionsvermögens von Gegenständen
Cäsar, Joachim; Teipel, Ulrich | Patent |
| 2017 | Verwendung von offen strukturierten, hydrophil modifizierten, mesoporösen Mikro-SiO2-Partikeln zur Abwehr von Hagel und/oder zur Auslösung der Abregnung einer Gewitterwolke und Verfahren zur Herstellung besagter Partikel
Schmid, Helmut; Eckl, Wilhelm; Inone-Kauffmann, Emilia Regina | Patent |
| 2017 | A viscoelastic approach for modeling bending behavior in finite element forming simulation of continuously fiber reinforced composites
Dörr, D.; Schirmaier, F.J.; Henning, F.; Kärger, L. | Journal Article |
| 2016 | 4. Symposium Rohstoffeffizienz und Rohstoffinnovationen 2016
: Teipel, Ulrich; Reller, Armin | Conference Proceedings |
| 2016 | Accelerated aging and cure kinetics of butacene® containing composite propellants
Seyidoglu, Tijen; Bohn, Manfred A.; Mußbach, Günter | Conference Paper |
| 2016 | Accurate cure modeling for isothermal processing of fast curing epoxy resins
Bernath, A.; Kärger, L.; Henning, F. | Journal Article |
| 2016 | Advanced approaches to the CL-20/HMX cocrystal
Herrmannsdörfer, Dirk; Herrmann, Michael; Heintz, Thomas | Conference Paper |
| 2016 | Analyse der Fließfrontprogression während des Injektionsprozesses lokal verstärkter Kohlenstofffaserhalbzeuge im RTM-Verfahren
Stanglmaier, S.; Vukoje, D.; Bickerton, S.; Hodde, J.; Repper, A.; Thoma, B.; Henning, F. | Journal Article |
| 2016 | Analysis of CIE-color values using the example of tracer munition
Knapp, Sebastian; Bieroth, D.; Kelzenberg, Stefan; Lity, André; Poth, H.; Raab, Angelika; Roth, Evelin; Weiser, Volker | Conference Paper |
| 2016 | Analysis of fiber orientation, microstructure and mechanical properties of specimens made from fiber-reinforced ABS manufactured by Fused Filament Fabrication (FFF)
Weidenmann, K.A.; Baumann, S.; Pinter, P.; Elsner, P. | Conference Paper |
| 2016 | Analyzing the migration of plasticizers in powders by imaging spectroscopy
Pontius, Heike; Dörich, Manuela; Heil, Moritz | Conference Paper |
| 2016 | Applications of Lignin Materials and Their Composites (Lignin Applications in Various Industrial Sectors, Future Trends of Lignin and Their Composites)
Naegele, H.; Pfitzer, J.; Ziegler, L.; Inone-Kauffmann, E.R.; Eisenreich, N. | Book Article |
| 2016 | Batch versus flow acetalization of benzaldehyde with HKUST-1: Diffusion pathways and performance comparison
Piscopo, Calogero Giancarlo; Schwarzer, M.; Herrmann, Michael; Affini, Anna; Pelagatti, Paolo; Maestri, Giovanni; Maggi, Raimondo; Löbbecke, Stefan | Journal Article |
| 2016 | Beitrag zur Umsetzung, Charakterisierung und Evaluierung eines Direktverfahrens zur Herstellung von strukturellen Bauteilkomponenten aus kohlenstofffaserverstärktem Kunststoff (InlinePrepreg)
Karcher, Michael
: Henning, Frank; Büter, A. | Dissertation |
| 2016 | Bestimmung der Aushärtekinetik eines 2-stufig aushärtenden Epoxidharzes zur Herstellung von Hochleistungsfaserverbunden
Karcher, Michael; Chaloupka, Alexander; Henning, Frank; Schmölzer, Stefan; Moukhina, Elena | Journal Article |
| 2016 | Bifunktionelle Synthesebausteine durch hydrothermale Verflüssigung von Organosolv-Lignin
Dahmen, N.; Hornung, U.; Schuler, J.; Schmiedl, D.; Rohde, V. | Journal Article |
| 2016 | Burning behavior of AN/ADN propellants
Tagliabue, C.; Weiser, Volker; Imiolek, Andreas; Bohn, Manfred A.; Heintz, Thomas; Gettwert, Volker | Conference Paper |
| 2016 | Characterisation and modelling of the curing reaction of HTPB with isocyanates by reaction heat determined by heat flow microcalorimetry and by volume shrinkage determined with a pressure curing cell
Bohn, Manfred A.; Seyidoglu, Tijen; Mußbach, Günter | Conference Paper |
| 2016 | Characterisation of different gun propellants by long-term mass loss
Heil, Moritz; Wimmer, Ann-Kathrin; Bohn, Manfred A. | Conference Paper |
| 2016 | Characterisation of the curing reaction of HTPB with isocyanate by heat flow microcalorimetry
Bohn, Manfred A. | Conference Paper |
| 2016 | Characterisation of the draping behaviour of unidirectional non-crimp fabrics (UD-NCF)
Schirmaier, F.J.; Weidenmann, K.A.; Kärger, L.; Henning, F. | Journal Article |
| 2016 | Characterization of membrane electrode assemblies for high-temperature PEM fuel cells
Rau, M.; Niedergesäß, A.; Cremers, Carsten; Alfaro, S.; Steenberg, T.; Hjuler, H.A. | Journal Article |
| 2016 | Characterization of metal-organic frameworks using X-ray diffraction
Herrmann, Michael; Kempa, Paul-Bernd; Fietzek, Harald; Altenburg, Thomas; Polyzoidis, Angelos; Piscopo, Calogero Giancarlo; Löbbecke, Stefan | Journal Article |
| 2016 | Characterization of nanoparticle layers deposited by wire explosions
Knapp, Sebastian; Eickershoff, B.; Eißler, Carmen; Fietzek, Harald; Günthner, Christian; Koleczko, Andreas; Schuppler, Heike | Conference Paper |
| 2016 | Characterization of several HTPB binder samples by NMR, GPC and OH-number
Kaiser, M.; Ditz, B.; Dörich, Manuela; Bohn, Manfred A. | Conference Paper |
| 2016 | Cohesive zone model parameterization by molecular dynamics
Nardai, Michael M.; Bohn, Manfred A. | Conference Paper |
| 2016 | Combining wave and spectroscopic techniques to monitor the development of thermosets during cure
Puentes, J.; Wruck, L.; Chaloupka, A.; Rudolph, N.; Osswald, T.A. | Conference Paper |
| 2016 | Comparative NMR study of nPrBTP and iPrBTP
Adam, C.; Rohde, V.; Müllich, U.; Kaden, P.; Geist, A.; Panak, P.J.; Geckeis, H. | Journal Article, Conference Paper |
| 2016 | Composite materials ready to replace aluminium in internal combustion engines
Keyser, H. de; Berg, L.-F.; Stammler, J. | Journal Article |
| 2016 | Consumption of atmospheric oxygen as ageing indicator of HTPB-based solid rocket propellants
Mußbach, Günter; Bohn, Manfred A. | Conference Paper |
| 2016 | Consumption of Atmospheric Oxygen as Ageing Indicator of HTPB-based Solid Rocket Propellants
Mußbach, Günter; Bohn, Manfred A. | Conference Paper |
| 2016 | Continuous microreactor synthesis of ZIF-8 with high space-time-yield and tunable particle size
Polyzoidis, Angelos; Altenburg, T.; Schwarzer, M.; Löbbecke, Stefan; Kaskel, S. | Journal Article |
| 2016 | Cyclotriphosphazene und deren Potential als Flammschutzmittel in Polymeren
Käbisch, Bert | Dissertation |
| 2016 | D 6.3 Communication Plan
Lagioia, Rocco
: Müller, Torsten; Rivas, Ana | Report |
| 2016 | D 6.4 PEDR Plan for the Exploitation and Dissemination of Results
Lafioia, Rocco
: Müller, Torsten | Report |
| 2016 | D 7.1 First Progress Report Part B
Rodriguez, Alicia; Araujo, Blanca; González, Manuel; Maroto, Jose Antonio; Val, Diego; García, Jose Manuel; Müller Thorsten; Lagioia, Rocco | Report |
| 2016 | D1.2 REE Balance Problem Analysis
Binnemans, Koen; Jones, Peter Tom
: Yurramendi, Lourdes; Müller, Torsten | Report |
| 2016 | D2.2 Magnesium Recycling Routes Optimization
Rodriguez, Alicia; San José, Ruth
: Rodriguez, Alicia; San José, Ruth; Müller, Torsten | Report |
| 2016 | D3.1 Report on the capabilities, facilities, networking and funding sources of the consortium partners in the field of forest biomass secondary processing
Nikkanen, Ville; Mikonsaari, Irma; Moser, Kevin; Reinhardt, Sebastian; Roßberg, Christine; Bruyne, F. de; Anghel, N.; Rautio, J.; Härkönen, M.; Tukiainen, P.; Gravitis, J.; Andzs, M.; Ubele, D.; Tschentscher, R.; Aasen, I.-M.; Balzer Le, S.; Joffres, B.; Johnson, K.; Mackintosh, W.; Joelson, J.; Söderberg, D.; Garcia Jaca, J.; Silva Perez, D. da; Malin, M. | Report |
| 2016 | Data interpretation and comparison of DMA results from HTPB-IPDI bonded composite elastomer samples used in an international Round Robin Test
Bohn, Manfred A.; Kronis-Rudigier, Gunnar; Mußbach, Günter | Conference Paper |
| 2016 | Debond on command: Fast debonding by exothermic reaction due to microwave activation
Sims, Stefan; Gettwert, Volker; Urban, Helfried; Winkel, Andreas; Kahlmeyer, Martin; Böhm, Stefan | Conference Paper |
| 2016 | Debonding using exothermic reactions
Sims, Stefan; Gettwert, Volker; Urban, Helfried; Winkel, Andreas; Kahlmeyer, Martin; Böhm, Stefan | Journal Article |
| 2016 | Deliverable 4.2. Report on other main European and global players in the field of separation and downstream processing
Nikkanen, Ville; Böringer, Sarah; Roßberg, Christine; Fornell, R.; Johnson, K.; MacIntosh, W.; Illergard, J.; Tschentscher, R.; Joffres, B.; Hesser, F.; Hedeler, B.; Andzs, M.; Spiridon, I.; Stelian, V.; Bruyne, F. de; Azpeitia, M.; Ipinazar, E.; Grönroos, A.; Tukiainen, P.; Härkönen, M.; Malin, M. | Report |
| 2016 | Design, fabrication and embedding of microscale interdigital sensors for real-time cure monitoring during composite manufacturing
Moghaddam, M.K.; Breede, A.; Chaloupka, A.; Bödecker, A.; Habben, C.; Meyer, E.-M.; Brauner, C.; Lang, W. | Journal Article |
| 2016 | Detection of capacity imbalance in vanadium electrolyte and its electrochemical regeneration for all-vanadium redox-flow batteries
Roznyatovskaya, N.; Herr, T.; Küttinger, M.; Fühl, M.; Noack, J.; Pinkwart, K.; Tübke, J. | Journal Article |
| 2016 | Development of a novel consolidation process for continuous-fiber-reinforced thermoplastics
Baumgärtner, S.; Lohr, C.; Henning, F. | Conference Paper |
| 2016 | Development study of an air independent fuel cell system for an autonomous underwater vehicle (AUV)
Hitscherich, M.; Cremers, C.; Stolten, D.; Pinkwart, K.; Tübke, J. | Conference Paper |
| 2016 | Diffusion and lifetime modeling for slurry aluminide coating on P92 at 650°C with a computational and experimental approach
Krukovskyi, P.; Metel, M.; Agüero, A.; Muelas, R.; Kolarik, V. | Journal Article |
| 2016 | Direct adhesion of CFR-thermoplast on steel - testing and simulation of the lap shear fracture
Yüksel, F.; Hinterhölzl, R.; Drechsler, K. | Conference Paper |
| 2016 | Direct Simulation of PBX Uniaxial Tensile Testing by Molecular Dynamics
Nardai, Michael M.; Bohn, Manfred A. | Conference Paper |
| 2016 | Dispergierung und Eigenschaften von Carbon Nanotubes
Dresel, A.; Teipel, U. | Journal Article |
| 2016 | Durch exotherme Reaktionen schnell entkleben
Sims, Stefan; Gettwert, Volker; Urban, Helfried; Winkler, Andreas; Kahlmeyer, Martin; Böhm, Stefan | Journal Article |
| 2016 | Dynamic mechanical analysis of nitrocellulose-plasticizer mixtures
Mitró, Daniel; Böhnlein-Mauß, Jutta | Abstract |
| 2016 | Effect of Butacene® on ageing of composite propellants
Seyidoglu, Tijen; Bohn, Manfred A. | Conference Paper |
| 2016 | Effect of different technological and energy supply related measures on the primary energy demand of CFPR production
Wehner, Daniel; Hohmann, Andrea; Schwab, Bernhard; Albrecht, Stefan; Ilg, Robert; Sedlbauer, Klaus; Leistner, Philip; Drechsler, Klaus | Conference Paper |
| 2016 | Effect of model fuel impurities for reformed jet fuels on the hydrogen oxidation at platinum based catalysts under HT-PEMFC conditions
Cremers, C.; Rau, M.S.; Niedergesäß, A.; Pinkwart, K.; Tübke, J. | Conference Paper |
| 2016 | The efficient route to tailored Organo Sheets
Baumgärtner, Sebastian; John, Jennifer; Henning, Frank; Huber, Timo; Hangs, Benjamin | Journal Article |
| 2016 | Effizient zum maßgeschneiderten Organoblech
Baumgärtner, Sebastian; John, Jennifer; Henning, Frank; Huber, Timo; Hangs, Benjamin | Journal Article |
| 2016 | EILs - suitable substances for future energetic applications?
Schaller, Uwe; Keicher, Thomas; Krause, Horst; Schlechtriem, S. | Conference Paper |
| 2016 | Einfluss der Eindickung von dichtereduziertem Sheet Moulding Compound auf die Formteilwelligkeit
Keckl, Christoph
: Henning, F.; Mitschang, P. | Dissertation |
| 2016 | Einsatz der ortsaufgelösten Röntgenbeugung zur Untersuchung der Destabilisierungstiefe von Wärmedämmschichten
Kolarik, Vladislav; Kuchenreuther, V.; Juez-Lorenzo, Maria; Fietzek, Harald; Stamm, W. | Abstract |
| 2016 | Emission spectroscopy on pyrotechnic mixtures
Knapp, Sebastian; Günthner, Christian; Kelzenberg, Stefan; Roth, Evelin; Raab, Angelika; Weiser, Volker | Conference Paper |
| 2016 | Energetic Materials. Synthesis, Characterization, Processing
| Conference Proceedings |
| 2016 | Energetic Nanomaterials: Synthesis, Characterization, and Application
: Zarko, V.E.; Gromov, A.A. | Book |
| 2016 | Energieeffiziente Herstellung komplexer Hochleistungsfaserverbundbauteile mittels Pultrusion, In-Line Flechten, Blasumformung und Endbearbeitung (PulForm)
: Bezerra, Renato | Report |
| 2016 | Energy efficiency and ecological benefits of a self-heated CFRP tool designed for resin transfer moulding
Arikan, E.; Hohmann, A.; Kammerhofer, P.; Reppe, M.; Remer, N.; Drechsler, K. | Conference Paper |
| 2016 | Entkleben unter Nutzung exothermer Reaktionen
Sims, Stefan; Gettwert, Volker; Urban, Helfried; Winkel, Andreas; Kahlmeyer, Martin; Böhm, Stefan | Journal Article |
| 2016 | Entwicklung einer Debonding-on-Demand-Konzeptlösung unter Verwendung funktioneller Suszeptor-Additivmaterialien zur Erzeugung von Thermoschocks
Sauer, Michael
: Horn, S.; Drechsler, K. | Master Thesis |
| 2016 | Entwicklung eines Design for End of Life Tools für die Luftfahrtindustrie
Wimmer, A.K.; Salles, A.; Müller, T.; Elsner, P. | Journal Article |
| 2016 | Ergebnisse einer Befragung zum Umgang mit Porenbetonabfällen aus dem Abbruch von Gebäuden
Stier, Christian; Forberger, Jens | Journal Article |
| 2016 | Ethanol oxidation reaction (EOR) investigation on Pt/C, Rh/C, and Pt-based bi- and tri-metallic electrocatalysts: A DEMS and in situ FTIR study
Bach Delpeuch, A.; Maillard, F.; Chatenet, M.; Soudant, P.; Cremers, C. | Journal Article |
| 2016 | European training network to accelerate the development chain of nanostructured polymers
: Hübner, Christof | Report |
| 2016 | Evaluation of Different Commercially Available Surface-Enhanced Raman Spectroscopy (SERS) - Substrates and Improved Methods for Detection of Explosives
Schweikert, Wenka; Mendl, A.; Eichberger, Sascha | Abstract |
| 2016 | Evaluation of metal-organic frameworks for gas-phase preconcentration and sample enrichment by inverse gas chromatography (IGC)
Rieger, Max; Wittek, Michael; Schnürer, Frank; Löbbecke, Stefan | Conference Paper |
| 2016 | Experimental analysis of gaps and overlaps caused by intra-ply sectorization in the thermoplastic automated fiber placement process
Zenker, T.; Schuerger, C.; Drechsler, K. | Conference Paper |
| 2016 | Experimental investigation of the radius forming behavior of fiber reinforced thermoplastics
Schug, A.; Hinterhölzl, R.; Drechsler, K. | Conference Paper |
| 2016 | Explosives
Meyer, R.; Köhler, J.; Homburg, A. | Book |
| 2016 | Fast heating of selective adsorber beads for large volume application
Heil, Moritz; Baumann, Sascha; Krause, Horst | Conference Paper |
| 2016 | Feinzerkleinerung lignocellulosehaltiger Rohstoffe
Eisenlauer, M.; Teipel, U. | Journal Article |
| 2016 | First verification of the modified hartmann-apparatur with aluminum and magnesium particles
Kuchenreuther-Hummel, V.; Schneider, M.; Liehmann, M.; Neutz, J. | Conference Paper |
| 2016 | Flexible intelligente Bearbeitungstechnologien für komplexe Faserverbundbauteile
Drechsler, Klaus | Book |
| 2016 | Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2015/2016
| Annual Report |
| 2016 | Fuel Flexible, Near Zero Emissions, Adaptive Performance Marine Engine
: Kuhlen, Karl Gerhard | Report |
| 2016 | Fuel Flexible, Near Zero Emissions, Adaptive Performance Marine Engine
: Kuhlen, Karl Gerhard | Report |
| 2016 | Gasgenerator-Treibstoff auf der Basis von Ammoniumdinitramid (ADN) und Verfahren zu seiner Herstellung
Krause, Horst; Schlechtriem, Stefan; Weiser, Volker; Schaller, Uwe; Hürttlen, Jürgen | Patent |
| 2016 | Gestaltabweichungen dünnwandiger, lokal verstärkter CF/PPS Gelegelaminate
Hangs, Benjamin
: Henning, F.; Ermanni, P. | Dissertation |
| 2016 | Green liquid propellant oxidizers basing on solutions of ADN and an in commercial hydrogen peroxide for hypergolic propellants
Weiser, Volker; Hürttlen, Jürgen; Schaller, Uwe; Imiolek, Andreas; Lity, André; Kelzenberg, Stefan | Conference Paper |
| 2016 | Hand in Hand zu Serienlösungen
Karcher, Michael; Huber, Timo; Thoma, Bernd | Journal Article |
| 2016 | Highly-active Pd-Cu electrocatalysts for oxidation of ubiquitous oxygenated fuels
Serov, A.; Asset, T.; Padilla, M.; Matanovic, I.; Martinez, U.; Roy, A.; Artyushkova, K.; Chatenet, M.; Maillard, F.; Bayer, D.; Cremers, C.; Atanassov, P. | Journal Article |
| 2016 | Hot spots sensitization and optical detonation measurements of emulsion explosives
Quaresma, J.; Campos, J.; Pimenta, J.; Ribeiro, A.; Mendes, R.; Gois, J.; Deimling, Lukas; Keicher, Thomas | Conference Paper |
| 2016 | Hybrid resin improves position and alignment of continuously reinforced prepreg during compression co-molding with sheet molding compound
Bücheler, D.; Henning, F. | Conference Paper |
| 2016 | Impact of water adsorbates on the acetaldehyde oxidation reaction on Pt- and Rh-based multimetallic electrocatalysts
Bach Delpeuch, A.; Cremers, C.; Chatenet, M. | Journal Article |
| 2016 | In-situ Characterization of Curing Reaction of GAP and Isocyanates by Near Infrared Spectroscopy
Imiolek, Andreas; Becker, Wolfgang; Sachsenheimer, K.; Weiser, Volker | Conference Paper |
| 2016 | In-situ detection of phase transitions of semi-crystalline carbon fiber reinforced thermoplastics using dielectric analysis and its correlation to DMA and DSC
Chaloupka, A.; Grund, D.; Wedel, A.; Rudolph, N.M.; Drechsler, K. | Conference Paper |
| 2016 | In-situ Überwachung der kontinuierlichen Synthese van ZIF-8
Polyzoidis, Angelos; Dinnebier, Robert E.; Herrmann, Michael; Piscopo, Calogero Giancarlo; Löbbecke, Stefan | Abstract |
| 2016 | Industrial waste residues evaluation
Sgarioto, Serena; Binnemans, Koen; Yurramendi, Lourdes
: Müller, Torsten | Report |
| 2016 | Influence of aging on the burning behavior of ferrocene-type catalyzed composite rocket propellants
Imiolek, Andreas; Bohn, Manfred A.; Weiser, Volker; Seyidoglu, Tijen | Conference Paper |
| 2016 | The influence of Al4C3 nanoparticles on the physical and mechanical properties of metal matrix composites at high temperatures
Vorozhtsov, S.; Kolarik, V.; Promakhov, V.; Zhukov, I.; Vorozhtsov, A.; Kuchenreuther-Hummel, V. | Journal Article |
| 2016 | Influence of charge size on enhanced blast explosives
Gerber, P.; Happ, A. | Abstract |
| 2016 | Influence of epoxy- and polyamide-compatible carbon fiber sizings on interfacial fracture toughness and in-plane shear properties of carbon fiber reinforced polyamide-6
Greisel, M.; Kurek, A.; Chaloupka, A.; Moosburger-Will, J.; Mueller, W.M.; Sause, M.G.R.; Horn, S. | Conference Paper |
| 2016 | The influence of mass-transport conditions on the ethanol oxidation reaction (EOR) mechanism of Pt/C electrocatalysts
Bach Delpeuch, A.; Jacquot, M.; Chatenet, M.; Cremers, C. | Journal Article |
| 2016 | Influence of various binders and oxidizers on the spectral emission of pyro-organic flares
Roth, E.; Weiser, Volker; Raab, Angelika; Lity, André | Conference Paper |
| 2016 | Innovative Technologien für Ressourceneffizienz - Strategische Metalle und Mineralien
: Dürkoop, A.; Brandstetter, C.P.; Gräbe, G.; Rentsch, L. | Book |
| 2016 | Integrated pre-concentrator gas sensor microsystem for ppb level benzene detection
Leidinger, M.; Rieger, M.; Sauerwald, T.; Alépée, C.; Schütze, A. | Journal Article |
| 2016 | Integrated pre-concentrator gas sensor system for improved trace gas sensing performance
Leidinger, M.; Sauerwald, T.; Schütze, A.; Alepee, C.; Rieger, M. | Conference Paper |
| 2016 | The interface of CFRP face sheets and aluminum foam cores in hybrid sandwich panels manufactured by a PUR spraying process
Rupp, P.; Wafzig, F.; Weidenmann, K.A. | Conference Paper |
| 2016 | INTRA r³+ - Integration und Transfer der r³-Fördermaßnahme
Dürkoop, Anke; Büttner, Philipp; Albrecht, Stefan; Brandstetter, Christian P.; Erdmann, Martin; Gräbe, Gudrun; Moller, Björn; Höck, Michael; Kleeberg, Kirstin; Rentsch, Lars; Schneider, Katja; Ostertag, Katrin; Pfaff, Matthias; Sartorius, Christian; Tercero Espinoza, Luis A.; Szurlies, Michael; Wilken, Hildegard | Book Article |
| 2016 | Investigation of nitromethane as an ingredient in gelled propellants
Schaller, Uwe; Hürttlen, Jürgen; Keicher, Thomas | Conference Paper |
| 2016 | Investigation of ruthenium promoted palladium catalysts for methanol electrooxidation in alkaline media
Jurzinsky, T.; Kammerer, P.; Cremers, C.; Pinkwart, K.; Tübke, J. | Journal Article |
| 2016 | Investigation on the structural behavior of a metallically 3D-reinforced CFRP/CFRP joint using a variable search based on finite element analyzes
Lang, H.; Nogueira, A.C.; Jürgens, M.; Hombergsmeier, E.; Hinterhölzl, R.; Drechsler, K. | Journal Article |
| 2016 | Kontrolle mikrobieller Umwelteinflüsse auf Produkte und Prozesse
Schmid, Helmut; Koleczko, Andreas; Knapp, Sebastian | Conference Paper |
| 2016 | Layup and process dependent wrinkling behavior of PPS/CF UD tape-laminates during non-isothermal press forming into a complex component
Joppich, T.; Doerr, D.; Meulen, L. van der; Link, T.; Hangs, B.; Henning, F. | Conference Paper |
| 2016 | Leichtbaupotenzial langfaserverstärkter Thermoplaste (LFT) in Integralschaumbauweise hergestellt durch Schaumspritzgießen mit Dekompressionshub
Roch, Alexander
: Elsner, Peter; Drummer, D.; Henning, Frank | Dissertation |
| 2016 | Magnesium dross and scrapquality
Rivas, Ana; Alcalde, Estíbaliz; San José, Ruth
: Rivas, Ana; Val, Diego; Alcalde, Estíbaliz; San José, Ruth; Müller, Torsten | Report |
| 2016 | Manfred Held, a life devoted to explosives science. Editorial
Eisenreich, N. | Journal Article |
| 2016 | Mass flow measurements on airbag inflators
Arce, Yurrita P.; Klahn, Thorsten; Deimling, Lukas; Roussel Garcia, Raquel; Schreiber, Achim | Conference Paper |
| 2016 | Measuring where it counts
Bergmann, Björn; Mikonsaari, Irma; Guschin, Viktor; Weiß, Patrick; Baumann, Sascha | Journal Article |
| 2016 | Mechanical properties of unidirectional continuous carbon fiber reinforced sheet molding compounds
Trauth, A.; Bücheler, D.; Henning, F.; Weidenmann, K.A. | Conference Paper |
| 2016 | Membrane electrode assemblies for water electrolysis using WO3-supported IrxRu1-xO2 catalysts
Baumann, Nils; Cremers, Carsten; Pinkwart, Karsten; Tübke, Jens | Journal Article |
| 2016 | Methanol oxidation on PdRh/C electrocatalyst in alkaline media: Temperature and methanol concentration dependencies
Jurzinsky, T.; Kintzel, B.; Bär, R.; Cremers, C.; Tübke, J. | Journal Article |
| 2016 | Methanol oxidation on Ru- or Ni-modified Pd-electrocatalysts in alkaline media: A comparative differential electrochemical mass spectrometry study
Jurzinsky, T.; Kintzel, B.; Bär, R.; Cremers, C.; Pinkwart, K.; Tübke, J. | Conference Paper |
| 2016 | A method for validation of finite element forming simulation on basis of a pointwise comparison of distance and curvature
Dörr, D.; Joppich, T.; Schirmaier, F.; Mosthaf, T.; Kärger, L.; Henning, F. | Conference Paper |
| 2016 | Mittendrin statt nur dabei
Bergmann, Björn; Mikonsaari, Irma; Guschin, Viktor; Weiß, Patrick; Baumann, Sascha | Journal Article |
| 2016 | Modelling and simulation of the pultrusion process with closed injection and impregnation molds
Bezerra, R.; Henning, F. | Conference Paper |
| 2016 | Modelling and validation of synthesis of poly lactic acid using an alternative energy source through a continuous reactive extrusion process
Dubey, S.P.; Abhyankar, H.A.; Marchante, V.; Brighton, J.L.; Blackburn, K.; Temple, C.; Bergmann, B.; Trinh, G.; David, C. | Journal Article |
| 2016 | Modelling of measurement data on the curing reaction of HTPB with isocyanate obtained by heat flow microcalorimetry and pressure decrease in closed vessel cells
Bohn, Manfred A.; Seyidoglu, Tijen; Mußbach, Günter | Conference Paper |
| 2016 | Molecular dynamics simulation of cohesion within solid propellants
Nardai, Michael M.; Bohn, Manfred A. | Conference Paper |
| 2016 | Multiaxiale Hochleistungs-Gewebekonstruktionen und deren belastungskonforme Nutzung zu Leichtbau-Composites mit unterschiedlichen Matrices
: Wendel, Rainer (Projektleiter); Bauder, Hans-Jürgen (Projektleiter) | Report |
| 2016 | Multiscale dispersion-state characterization of nanocomposites using optical coherence tomography
Schneider, S.; Eppler, F.; Weber, M.; Olowojoba, G.; Weiss, P.; Hübner, C.; Mikonsaari, I.; Freude, W.; Koos, C. | Journal Article |
| 2016 | Nanometals: Synthesis and Application in Energetic Systems
Gromov, A.A.; Korotkikh, A.G.; Il'in, A.; DeLuca, L.T.; Arkhipov, V.A.; Monogarov, K.A.; Teipel, U. | Book Article |
| 2016 | Neuartige Innenraumbeschichtung zur nachhaltigen Verbesserung der Raumluft und des Raumklimas
Schmid, Helmut | Patent |
| 2016 | New energetic ingredients for solid rocket propulsion
DeLuca, L.T.; Palmucci, I.; Franzin, A.; Weiser, V.; Gettwert, V.; Wingborg, N.; Sjoblom, M. | Journal Article |
| 2016 | Non-destructive ageing state determination of solid rocket motors charges
Tussiwand, G.; Eineder, L.; Mussbach, G.; Bohn, M.A. | Conference Paper |
| 2016 | Novel low-cost selective pre-concentrators based on metal organic frameworks
Wilhelm, I.; Rieger, M.; Hürttlen, J.; Wittek, M.; Alépée, C.; Leidinger, M.; Sauerwald, T. | Journal Article, Conference Paper |
| 2016 | Numerical simulation of advanced pultrusion processes with microwave heating
Barkanov, E.; Akishin, P.; Emmerich, R.; Graf, M. | Conference Paper |
| 2016 | Ökoeffizienz-Analyse zur Bewertung unterschiedlicher CFK-Recyclingtechnologien
Dieterle, Michael
: Seiler, Elisa (Betreuer); Viere, Tobias (Betreuer); Lang-Koetz, Claus (Zweitkorrektor) | Master Thesis |
| 2016 | On the design of a comb-shaped, poly(phenylene oxide)-based anodic binder for anion-exchange membrane direct methanol fuel cell (AEM-DMFC)
Jurzinsky, T.; Bär, R.; Heppe, N.; Kübler, M.; Jung, F.; Cremers, C.; Tübke, J. | Conference Paper |
| 2016 | On the general water harvesting capability of metal-organic frameworks under well-defined climatic conditions
Trapani, F.; Polyzoidis, Angelos; Löbbecke, Stefan; Piscopo, Calogero Giancarlo | Journal Article |
| 2016 | On the influence of Ag on Pd-based electrocatalyst for methanol oxidation in alkaline media: A comparative differential electrochemical mass spectrometry study
Jurzinsky, T.; Cremers, C.; Pinkwart, K.; Tübke, J. | Journal Article |
| 2016 | On-board fuel tailoring with a novel catalytic evaporator for HCCI combustion
Szolak, R.; Morales Wiemer, E.A.; Kraljevic, I.; Susdorf, A.; Karadeniz, H.; Epple, B.; Rümmele, F.; Schaadt, A. | Report |
| 2016 | One step to comparable off-plane permeability results - an improved measuring method for transverse permeability and compaction behavior of textile fiber materials
Graupner, R.; Drechsler, K. | Conference Paper |
| 2016 | Online detection and categorisation of defects along carbon fibre production using a high resolution, high width line scan vision system
Geinitz, S.; Wedel, A.; Margraf, A. | Conference Paper |
| 2016 | Optimization of PLA compounds using novel nucleating agents and plasticizers
Moser, K.; Schmitt, M.; Holzer, A.; Bergmann, B.; Diemert, J.; Elsner, P. | Conference Paper |
| 2016 | Optimized profile extrusion processes for biopolymer blends
Moser, K.; Holzer, A.; Bergmann, B.; Diemert, J. | Conference Paper |
| 2016 | Particle properties and crystal structure of ADN-prills
Heintz, Thomas; Herrmann, Michael; Leisinger, Karlfred; Reinhard, Werner | Conference Paper |
| 2016 | PDF - Ein neuer Ansatz zur Strukturbestimmung energetischer Materialien
Herrmann, Michael; Kempa, Paul-Bernd | Abstract |
| 2016 | Performance of HIPIMS deposited CrN/NbN nanostructured coatings exposed to 650 °C in pure steam environment
Hovsepian, P.E.; Ehiasarian, A.P.; Purandare, Y.P.; Biswas, B.; Pérez, F.J.; Lasanta, M.I.; De Miguel, M.T.; Illana, A.; Juez-Lorenzo, M.; Muelas, R.; Agüero, A. | Journal Article |
| 2016 | Poly(Epichlorohydrin-CO-1,2-Epoxyhexane) - a promising precursor for an energetic azido polymer for cast-cure processing
Hafner, Sven; Keicher, Thomas; Klapötke, Thomas M. | Conference Paper |
| 2016 | Polyurethanes based on 2,2-Dinitropropane-1,3-diol and 2,2-bis(azidomethyl)propane-1,3-diol as potential energetic binders
Bellan, A.B.; Hafner, S.; Hartdegen, V.A.; Klapötke, T.M. | Journal Article |
| 2016 | Positive effect of the fluorine moiety on the oxygen storage capacity of UiO-66 metal-organic frameworks
Piscopo, C.G.; Trapani, F.; Polyzoidis, A.; Schwarzer, M.; Pace, A.; Loebbecke, S. | Journal Article |
| 2016 | Potential Energetic Plasticizers on the Basis of 2,2-Dinitropropane-1,3-diol and 2,2-Bis(azidomethyl)propane-1,3-diol
Hafner, S.; Hartdegen, V.A.; Hofmayer, M.S.; Klapötke, T.M. | Journal Article |
| 2016 | Preface
Zarko, V.E.; Gromov, A.A. | Book Article |
| 2016 | Problematik der Übertragbarkeit bestehender Verfahren zur Kunststoff-Charakterisierung auf Kunststoffgemische
Forberger, J.; Becker, R.W. | Journal Article |
| 2016 | Process and mold development of direct long fiber reinforced foam injection molding on the example of polycarbonate and glasfibers
Lohr, C.; Menrath, A.; Elsner, P.; Weidenmann, K.A. | Conference Paper |
| 2016 | Process-parameter-dependent spring-in and warpage of locally reinforced ud tape laminates and V-shaped profiles
Hangs, B.; Link, T.; Henning, F. | Conference Paper |
| 2016 | Proximal detection of traces of energetic materials with an eye-safe UV raman prototype developed for civil applications
Chirico, R.; Almaviva, S.; Colao, F.; Fiorani, L.; Nuvoli, M.; Schweikert, W.; Schnürer, F.; Cassioli, L.; Grossi, S.; Murra, D.; Menicucci, I.; Angelini, F.; Palucci, A. | Journal Article |
| 2016 | Radiation-grafted materials for energy conversion and energy storage applications
Nasef, M.M.; Gürsel, S.A.; Karabelli, D.; Güven, O. | Journal Article |
| 2016 | Recent advances and applications of external Cavity-QCLs towards hyperspectral imaging for standoff detection and real-time spectroscopic sensing of chemicals
Ostendorf, R.; Butschek, L.; Hugger, S.; Fuchs, F.; Yang, Q.; Jarvis, J.; Schilling, C.; Rattunde, M.; Merten, A.; Grahmann, J.; Boskovic, D.; Tybussek, T.; Rieblinger, K.; Wagner, J. | Journal Article |
| 2016 | Recyclable epoxy system for HP-RTM application
Pastine, S.; Meirson, G.; Swentek, I.; Nasrullah, M.; Kosinski, S.; Banatao, R.; Ugresic, V.; Henning, F. | Conference Paper |
| 2016 | Recycling von Textilien aus carbonfaserverstärkten Kunststoff-Bauteilen und deren Produktion
Seiler, E.; Stark, A.; Forberger, J. | Journal Article |
| 2016 | Recyclinggerechte Produktentwicklung in der Luftfahrt am Beispiel Fluggastsitz
Wimmer, Ann-Kathrin
: Elsner, P.; Fröhling, M.; Eyerer, P. | Dissertation |
| 2016 | Scenario-based comparative assessment of potential future electricity systems - A new methodological approach using Germany in 2050 as an example
Lunz, Benedikt; Stöcker, Philipp; Eckstein, Sascha; Nebel, Arjuna; Samadi, Sascha; Erlach, Berit; Fischedick, Manfred; Elsner, Peter; Sauer, Dirk Uwe | Journal Article |
| 2016 | Schnelle Prozesse - Mikrowellen in der Verfahrenstechnik
Emmerich, Rudolf | Journal Article |
| 2016 | Sensitivity of material properties on wrinkling behavior and fiber reorientation of thermoplastic UD-Tape laminates during forming analyzed by Finite Element forming simulation
Dörr, Dominik; Joppich, Tobias; Schirmaier, Fabian; Mosthaf, Tobias; Kärger, Luise; Henning, Frank | Conference Paper |
| 2016 | Shrinking core model to describe metal particle oxidation from thermal analysis data
Kelzenberg, S.; Eisenreich, N.; Knapp, S.; Weiser, V. | Journal Article |
| 2016 | Simulation of closed vessel combustion using the 2D ICT-Cellular-Combustion-Algorithm
Wurster, S.; Fischer, T.S. | Conference Paper |
| 2016 | Simulation of double base propellant combustion using the ICT-cellular-combustion-algorithm
Wurster, Sebastian | Conference Paper |
| 2016 | Stärkebasierte Textilien: Kostengünstige Textilien aus Biopolymeren
Manvi, P.K.; Seide, G.; Gries, T.; Buczko, A.; Moser, K. | Journal Article |
| 2016 | Status on root cause investigation on airbag inflator failure mode
Neutz, J.; Ebeling, H.; Yoshimura, K. | Journal Article |
| 2016 | Study of the long-term operation of a vanadium/oxygen fuel cell
Noack, J.; Cognard, G.; Oral, M.; Küttinger, M.; Roznyatovskaya, N.; Pinkwart, K.; Tübke, J. | Journal Article |
| 2016 | Synthese und Charakterisierung von energetischen ionischen Liquiden auf Basis von 4-Amino-1,2,4-triazol
Schaller, Uwe
: Schlechtriem, Stefan; Elsner, Peter | Dissertation |
| 2016 | Techno-economic modeling and analysis of redox flow battery systems
Noack, Jens; Wietschel, Lars; Roznyatovskaya, Nataliya; Pinkwart, Karsten; Tübke, Jens | Journal Article |
| 2016 | Temperature and spatially resolved investigations of the microstructure of gun propellants by means of x-ray diffraction
Herrmann, Michael; Förter-Barth, Ulrich; Fietzek, Harald; Böhnlein-Mauß, Jutta; Kaiser, M. | Conference Paper |
| 2016 | Temperaturverhalten von Ammoniumdinitramid und Wechselwirkungen mit Additiven für Festtreibstoffe
Herrmann, Michael; Kempa, Paul-Bernd; Förter-Barth, Ulrich; Heintz, Thomas | Abstract |
| 2016 | Test facility for investigation of impact-initiated bimetallic compounds
Schreiber, Achim; Klahn, Thorsten; Zilly, Andreas; Deimling, Lukas; Schuch, Michael | Conference Paper |
| 2016 | Thermogravimetric analysis of molybdenum oxide (MoO3) decomposition
Knapp, Sebastian; Eisenreich, Norbert; Kuchenreuther-Hummel, Veronika; Kelzenberg, Stefan; Koleczko, Andreas; Schuppler, Heike | Conference Paper |
| 2016 | Towards an all-vanadium redox-flow battery electrolyte: electrooxidation of V(III) in V(IV)/V(III) redox couple
Roznyatovskaya, N.; Noack, J.; Fühl, M.; Pinkwart, K.; Tübke, J. | Journal Article |
| 2016 | Die Tücke liegt im Detail - Ringversuch zum Thema Mischgasprüfung
Lauff, Mareike; Cäsar, Joachim; Beier, Jochen | Conference Paper |
| 2016 | Turning trees into foam
Schneider, A.; Rapp, F.; Iglhaut, K.; Michel, A. | Journal Article |
| 2016 | Überprüfung der Kalibrierung von Manganin-Stoßdrucksonden im Druckbereich von 150 bis 275 kbar
Leibold, Marvin | Bachelor Thesis |
| 2016 | A unified kinetic model for adsorption and desorption - Applied to water on zeolite
Gaulke, M.; Guschin, V.; Knapp, S.; Pappert, S.; Eckl, W. | Journal Article |
| 2016 | Untersuchungen zur Aminierung von Alkoholen mit einer DRIFTS-Zelle
Rosemeier, Michael | Bachelor Thesis |
| 2016 | Using Thermogravimetric Analysis to Determine Carbon Fiber Weight Percentage of Fiber-Reinforced Plastics
Bücheler, D.; Kaiser, A.; Henning, F. | Journal Article |
| 2016 | Utilization of recycled wood in biorefineries: Preliminary results of steam explosion and ethanol/water organosolv pulping without a catalyst
Lesar, Bostjan; Humar, Miha; Hora, Guido; Hachmeister, Philipp; Schmiedl, Detlef; Pindel, Elvira; Siika-aho, Matti; Liitiä, Tiina | Journal Article |
| 2016 | Verfahren und Vorrichtung zur Herstellung von mit Einlegern versehenen Polymer-Formteilen
Bücheler, David | Patent |
| 2016 | Verfahren zur Regeneration der Elektrolytlösung eines Redox-Flow-Akkumulators
Noack, Jens; Fischer, Peter; Tübke, Jens; Pinkwart, Karsten | Patent |
| 2016 | Verfahren zur Versorgung eines elektische Energie umsetzenden Implantates mit elektrischer Energie
Schmid, Helmut; Eckl, Wilhelm | Patent |
| 2016 | Von der Idee zur Innovation
: Apel, Stefan (Hrsg.); Haupt, Olaf J. (Hrsg.); Krause, Dörthe (Hrsg.); Parrisius, Martina (Hrsg.) | Report |
| 2016 | Vorrichtung zur direkten und reversiblen Umwandlung thermischer Energie in elektrische Energie
Schmid, Helmut; Koleczko, Andreas | Patent |
| 2016 | Vorrichtung zur Umwandlung der Energie elektromagnetischer Strahlung in elektrische Energie
Schmid, Helmut; Walschburger, Erik; Mehring, Günter | Patent |
| 2015 | Aging of explosive crystals investigated by x-ray diffraction
Herrmann, M.; Bohn M.A. | Conference Paper |
| 2015 | Aircraft Metals Recycling - Process, Challenges and Opportunities
Müller, Torsten | Presentation |
| 2015 | Alkaline direct alcohol fuel cells
Cremers, C.; Jurzinsky, T.; Jung, F.; Pinkwart, K.; Tübke, J. | Conference Paper |
| 2015 | Analyse und Bewertung des Verzugs von lokal verstärkten Gelegelaminaten aus CP/PPS
Link, Tobias
: Hangs, Benjamin (Betreuer) | Master Thesis |
| 2015 | Analysis of pure tar substances (polycyclic aromatic hydeocarbons) in the gas stream using ultraviolet visible (UV-Vis) spectroscopy and multivariate cure resolution (MCR)
Weide, Tobias; Guschin, Viktor; Becker, Wolfgang; Kölle, Sabine; Maier, Simon; Seidelt, Stephan | Journal Article |
| 2015 | Anion intercalation into graphite from a sodium-containing electrolyte
Bordet, F.; Ahlbrecht, K.; Tübke, J.; Ufheil, J.; Hoes, T.; Oetken, M.; Holzapfel, M. | Journal Article |
| 2015 | Application of thermochemical sorption material to control the moisture of ammunition
Guschin, Viktor; Knapp, Sebastian; Wehner, Harald; Hakspiel, Fabian; Pappert, Sandra; Eckl, Wilhelm | Conference Paper |
| 2015 | Assessment of description quality of models by information theoretical criteria based on Akaike and Schwarz-Bayes applied with stability data of energetic materials
Bohn, Manfred A. | Conference Paper |
| 2015 | Aufschäumen von Hohlraumstrukturen für Strichschichten zur Reduzierung des spezifischen Gewichtes
Stocker, T.; Eisenblätter, J.; Gericke, R. | Journal Article |
| 2015 | Battery
Müller, Dominik; Abert, Michael; Berger, Thomas; Krampfert, Matthias; Bayha, Thomas | Patent |
| 2015 | Characterization of a fuel cell stack for use in material handling applications
Keller, S.; Cremers, C.; Niedergesäß, A.; Özel, T. | Conference Paper |
| 2015 | Characterization of butacene based composite propellants by loss factor curves determined with DMA
Seyidoglu, Tijen; Bohn, Manfred A. | Conference Paper |
| 2015 | Characterization of complexly warped components made from locally reinforced UD-tape laminates
Hangs, B.; Link, T.; Henning, F. | Abstract |
| 2015 | Characterization of sibex in 1,5m³ ICT detonation tank
Materna, Miriam; Keßler, Armin | Conference Paper |
| 2015 | Charakterisierung von Metall-organischen Gerüststrukturen (MOF) mit Hilfe der Röntgenbeugung
Herrmann, M.; Kempa, P.B.; Altenburg, T.; Polyzoidis, A.; Piscopo, C.G.; Löbbecke, S. | Conference Paper |
| 2015 | Die Chemie der Redox-Flow-Batterien
Noack, Jens; Roznyatsovskaya, Nataliya; Herr, Tatjana; Fischer, Peter | Journal Article |
| 2015 | The Chemistry of Redox-Flow Batteries
Noack, J.; Roznyatovskaya, N.; Herr, T.; Fischer, P. | Journal Article |
| 2015 | Cohesion properties in PBX and composite propellants - computational details
Nardai, Michael M.; Bohn, Manfred A. | Conference Paper |
| 2015 | Cohesion properties in PBX and composite propellants - computational results and experimental aspects
Nardai, Michael M.; Bohn, Manfred A. | Conference Paper |
| 2015 | Combustion Synthesis of AlN (Al3O3N), BN, ZrN, and TiN in Air and Ceramic Application
Gromov, A.A.; Maggi, F.; Malikova, E.V.; Pautova, J.I.; Il'in, A.P.; Popenko, E.M.; Sergienko, A.V.; Korotkikh, A.G.; Teipel, U. | Book Article |
| 2015 | Crosslinking of poly(vinylene fluoride) separators by gamma-irradiation for electrochemical high power charge applications
Karabelli, D.; Leprêtre, J.-C.; Dumas, L.; Rouif, S.; Portinha, D.; Fleury, E.; Sanchez, J.-Y. | Journal Article |
| 2015 | D 6-2 REMAGHIC Website
Rivas, Ana
: Rodriguez, Pedro; Müller, Torsten | Report |
| 2015 | Damage behaviour of fibre reinforced materials induced by high temperature oxidation for optimisation of thermal recycling routes
Manis, F.; Wölling, J.; Drechsler, K. | Conference Paper |
| 2015 | Deflagration-detonation experiments of sensitized mixtures of ammonium or urea nitrates and an energetic thermoplastic elastomer
Quaresma, J.; Keicher, Thomas; Pineiro, M.; Deimling, Lukas; Campos, Jose; Krause, Horst | Conference Paper |
| 2015 | Detection and modelling of thermal and rheological transitions of a 2-step-curing thermoset using dielectric and standard measuring techniques
Chaloupka, A.; Bezerra, R.; Madaksira, V.; Taha, I.; Rudolph, N.M. | Conference Paper |
| 2015 | Development of a novel experimental DEMS set-up for electrocatalyst characterization under working conditions of high temperature polymer electrolyte fuel cells
Niether, C.; Rau, M.S.; Cremers, C.; Jones, D.J.; Pinkwart, K.; Tübke, J. | Journal Article |
| 2015 | Development of a pure oxygen fuel cell system for an autonomous underwater vehicle with focus on fuel starvation due to inert gas accumulation on the anode
Hitscherich, M.; Cremers, C.; Stolten, D.; Pinkwart, K.; Tübke, J. | Conference Paper |
| 2015 | Development of an innovative heat storage system for combined heat and power plants (CHP)
Merkel, S.; Epple, Boris; Simsek, A.; Kollmeier, H.P.; Eckl, W.; Pappert, Sandra; Elsner, Peter | Abstract |
| 2015 | Development of anodic materials for HT-PEMFCs with high tolerance to H2S
Rau, M.; Cremers, C.; Tübke, J. | Journal Article |
| 2015 | Development of materials for anion-exchange membrane direct alcohol fuel cells
Jurzinsky, T.; Cremers, C.; Jung, F.; Pinkwart, K.; Tübke, J. | Journal Article |
| 2015 | Direct generation of titanium dioxide nanoparticles dispersion under supercritical conditions for photocatalytic active thermoplastic surfaces for microbiological inactivation
Zydziak, Nicolas; Ambrosio Zanin, Maria-Helena; Trick, Iris; Hübner, Christof | Journal Article |
| 2015 | Dithionite/air direct ion liquid fuel cell
Noack, J.; Tübke, J.; Pinkwart, K. | Journal Article |
| 2015 | Dose response relations of PP
Reichert, Thomas; Müller, Axel; Vatahska, Teodora; Manier, Gerhard; Schönlein, Artur; Geburtig, A.; Zäh, Matthias | Conference Paper |
| 2015 | Effect of curing agents and plasticizers on the loss factor curves of HTPB-binders quantified by modelling
Seyidoglu, Tijen; Bohn, Manfred A. | Conference Paper |
| 2015 | The effect of plasticizers on the glass-to-rubber behavior of Desmophen® 2200 based elastomers used for composite propellants
Lemos, Mauricio Ferrapontoff; Bohn, Manfred A. | Conference Paper |
| 2015 | Effect of surface treatment for metallic z-reinforcements on interlaminar fracture toughness of CFRP/CFRP joints
Jürgens, M.; Kurtovic, A.; Mertens, T.; Nogueira, A.C.; Lang, H.; Kolb, M.; Strobach, P.; Hombergsmeier, E.; Drechsler, K. | Conference Paper |
| 2015 | Effects of radiation on the flame front of hydrogen air explosions
Keßler, Armin; Wassmer, Conrad; Knapp, Sebastian; Weiser, Volker; Sachsenheimer, K.; Raab, Angelika; Langer, Gesa; Eisenreich, Norbert | Presentation |
| 2015 | Electrical buffer storage for energy harvesting
Hahn, R.; Möller, K.-C. | Book Article |
| 2015 | Electrocatalyst for direct alcohol fuel cells
Cremers, Carsten; Jurzinsky, Tilman; Bach Delpeuch, A.; Niether, C.; Jung, Florina; Pinkwart, Karsten; Tübke, Jens | Conference Paper |
| 2015 | Energetic materials - performance, safety and system applications
| Conference Proceedings |
| 2015 | Evaluation of the effect of plasticizers on the DMA loss factor, the thermal and mechanical properties of Desmophen® 2200 based elastomers used for composite propellants
Lemos, Mauricio Ferrapontoff; Bohn, Manfred A. | Conference Paper |
| 2015 | EXPEDIA - a new EU project aiming to reduce threats from homemade explosives
Keicher, Thomas; Hafner, Sven; Krause, Horst; Östmark, Henric; Kölhed, Malin; Krumlinde, Patrik | Conference Paper |
| 2015 | Experimental and theoretical comparison of a systematic variety of thermite compositions
Weiser, Volker; Roth, Evelin; Kelzenberg, Stefan; Becker, Wolfgang; Sachsenheimer, K. | Conference Paper |
| 2015 | Experimental determination of heat-dynamics of a zeolite bedding
Hakspiel, Fabian; Pappert, Sandra; Teipel, Ulrich; Eckl, Wilhelm | Abstract |
| 2015 | Experimental determination of heat-dynamics of a zeolite bedding in a plug flow reactor
Hakspiel, Fabian; Pappert, Sandra; Teipel, Ulrich; Eckl, Wilhelm | Abstract |
| 2015 | Experimentelle Charakterisierung des Einflusses verschiedener Bindersysteme auf die Permeabilität des Preforms bei der RTM-Fertigung
Magagnato, D.; Thoma, B.; Henning, F. | Journal Article |
| 2015 | Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2014/2015
| Annual Report |
| 2015 | FRP parts for internal combustion engines
Berg, L.-F. | Journal Article |
| 2015 | Fuel cells as range extender or auxiliary power unit for electric vehicles
Cremers, C.; Hitscherich, M.; Ries, P.; Niedergesäß, A.; Rau, M.S.; Pinkwart, K.; Tübke, J. | Conference Paper |
| 2015 | Germany gets on Eco Design for aircraft end-of-life strategy
Wimmer, A.-K. | Conference Paper |
| 2015 | Gewebe mit Polymerschicht
Schmid, Helmut; Eisenreich, Norbert; Homa, Peter | Patent |
| 2015 | Herstellung von Aminen aus Alkoholen mittels heterogener Katalysatoren
Späth, Sarah
: Kowollik, K. (Betreuer); Flick, K. (Betreuer) | Master Thesis |
| 2015 | High energy density amorphous silicon anodes for lithium ion batteries deposited by DC sputtering
Farmakis, F.; Elmasides, C.; Fanz, P.; Hagen, M.; Georgoulas, N. | Journal Article |
| 2015 | High-pressure resin injection - Key technology for large-scale production
Graf, M.; Chaudhari, R. | Conference Paper |
| 2015 | High-temperature polymer electrolyte membrane based direct ethanol fuel cell
Cremers, C.; Niether, C.; Delpeuch, A.B.; Ries, P.; Jung, F.; Pinkwart, K.; Tübke, J. | Conference Paper |
| 2015 | Highly active carbon supported palladium-rhodium PdXRh/C catalysts for methanol electrooxidation in alkaline media and their performance in anion exchange direct methanol fuel cells (AEM-DMFCs)
Jurzinsky, Tilman; Bär, R.; Cremers, Carsten; Tübke, Jens; Elsner, Peter | Journal Article |
| 2015 | An holistic evaluation of the state of the art and future developments on non-lethal microwave systems
Valente, F.; Paulissen, P.; Neutz, J.; Urban, H.; Roland-Price, A. | Conference Paper |
| 2015 | Hot-Spot modelling of propellant regression. Part 2
Knapp, Sebastian; Eisenreich, Norbert; Kelzenberg, Stefan; Weiser, Volker | Conference Paper |
| 2015 | Hot-spot modelling of thermite mixtures
Knapp, Sebastian; Weiser, V.; Kelzenberg, S.; Roth, E.; Eckl, W. | Conference Paper |
| 2015 | Hyperspectral imaging of pyrotechnical decoys
Schreiber, Achim; Klahn, Thorsten; Zilly, Andreas; Deimling, Lukas | Conference Paper |
| 2015 | Impact of HP-RTM process parameters on mechanical properties using epoxy and polyurethane
Swentek, I.; Beck, B.; Ugresic, V.; Potyra, T.; Henning, F. | Conference Paper |
| 2015 | Improvement of polymer films in terms of barrier properties using nanotechnology
Schmid, Helmut | Conference Paper |
| 2015 | The influence of different nitrocelluloses on the interaction in a binder-plasticizer system
Mitró, Daniel; Böhnlein-Mauß, Jutta | Conference Paper |
| 2015 | Influence of different plasticizers on the glass transition temperature of mixtures with energetic thermoplastic elastomers
Böhnlein-Mauß, Jutta; Mitró, Daniel; Helfrich, Mathias | Conference Paper |
| 2015 | Influence of H- and OH-adsorbates on the ethanol oxidation reaction
Delpeuch, A.B.; Chatenet, M.; Rau, M.S.; Cremers, C. | Journal Article |
| 2015 | Influence of surface treatment and design of 3D-reinforcements on delamination resistance & mechanical properties of CFRP/CFRP joints under static & fatigue loading
Juergens, M.; Kurtovic, A.; Mertens, T.; Kolb, M.; Greitemeier, D.; Lang, H.; Hombergsmeier, E.; Drechsler, K. | Conference Paper |
| 2015 | Influence of the temperature for the ethanol oxidation reaction (EOR) on Pt/C, Pt-Rh/C and Pt-Rh-SnO2/C
Delpeuch, A.B.; Asset, T.; Chatenet, M.; Cremers, C. | Journal Article |
| 2015 | Inhibitors for non-lethal anti-material applications
Armbrust, Torsten; Rozincsak, Linda; Klemenz, Melanie; Hummel, Marc; Bernewitz, Johanna; Neutz, Jochen | Conference Paper |
| 2015 | Insensitive, high-performance explosives
Herrmann, M. | Journal Article |
| 2015 | Interaction energies between binder polymers and crystalline surfaces in composite materials determined by solution microcalorimetry and computer simulation
Nardai, Michael M.; Bohn, Manfred A. | Abstract |
| 2015 | Investigation of rotating pyrotechnical decoy in realistic air flow with authentic ignition
Deimling, Lukas; Billeb, G.; Klahn, Thorsten; Schreiber, Achim; Zilly, Andreas | Conference Paper |
| 2015 | Investigations on injection molded, glass-fiber reinforced polyamide 6 integral foams using breathing mold technology
Roch, A.; Kehret, L.; Huber, T.; Henning, F.; Elsner, P. | Conference Paper |
| 2015 | IP-Schutzart IPX9 / IPX9K
Rühle, Steffen; Cäsar, Joachim | Conference Paper |
| 2015 | Kombination von turbidimetrischer Methode mit Verfahren der 369 multivariaten Datenanalyse zur Charakterisierung von Nanokompositen
Guschin, V.; Becker, W.; Mikonsaari, I.; Weiss, P.; Günthner, C.; Eickershoff, B.; Kölle, S.; Maier, S.; Llorens-Chiralt, R. | Conference Paper |
| 2015 | Lithium-sulfur cells: The Gap between the state-of-the-art and the requirements for high energy battery cells
Hagen, Markus; Hanselmann, Dominik; Ahlbrecht, Katharina; Maça, Rudi; Gerber, D.; Tübke, Jens | Journal Article |
| 2015 | Localisation of IED manufacturing facilities by detection of explosives in sewage water
Schnürer, Frank; Heil, Moritz; Rieger, Max; Eberhardt, Angelika; Aniol, Jasmin; Krause, Horst | Conference Paper |
| 2015 | Low temperature, high energy density non-aqueous Redox Flow Battery
Herr, T.; Fischer, P.; Tübke, J.; Pinkwart, K.; Elsner, P. | Conference Paper |
| 2015 | Machbarkeitsstudie zur Materialsubsitution von Stahl und Aluminium durch Sheet Moulding Compound (SMC) am Beispiel eines Automobilkarosseriebauteils
List, Jonas
: Henning, Frank; Keckl, Christoph (Projektleiter) | Master Thesis |
| 2015 | MAI ENVIRO. Vorstudie zur Lebenszyklusanalyse mit ökobilanzieller Bewertung relevanter Fertigungsprozessketten für CFK-Strukturen
Hohmann, Andrea; Schwab, Bernhard; Wehner, Daniel; Albrecht, Stefan; Ilg, Robert; Schüppel, Denny; Reden, Tjark von | Study |
| 2015 | Manufacturing of complex shape composite parts through the combination of pull-braiding and blow moulding
Bezerra, R.; Wilhelm, F.; Strauß, S.; Ahlborn, H. | Conference Paper |
| 2015 | Metal Organic Frameworks (MOFs): Time for a breakthrough in material supply
Polyzoidis, A.; Schwarzer, M.; Loebbecke, S.; Piscopo, C.G. | Journal Article |
| 2015 | Metal organic frameworks as selective preconcentrator material for gas-phase sensing
Rieger, Max; Heil, Moritz; Hürttlen, Jürgen; Schnürer, Frank; Bunte, Gudrun; Krause, Horst | Conference Paper |
| 2015 | Methodische Umsetzung und Bewertung eines neuartigen Prozesses zur lokalen und automatisierten Fixierung von textilen Preformlingen
Thoma, Bernd | Dissertation |
| 2015 | Microstructure of energetic thermoplastic elastomers investigated by means of x-ray diffraction
Herrmann, Michael; Förter-Barth, Ulrich; Keicher, Thomas | Conference Paper |
| 2015 | Microstructure of the HMX-Based PBX KS32 after Mechanical Loading
Herrmann, Michael; Förter-Barth, Ulrich; Bohn, Manfred A.; Krause, Horst; Koch, Michael; Werner, Arnold | Journal Article |
| 2015 | Model-based development of a holistic thermal management system for an electric car with a high temperature fuel cell range extender
Fischer, Torben; Götz, Florian; Berg, Lars Fredrik; Kollmeier, Hans-Peter; Gauterin, Frank | Conference Paper |
| 2015 | Modelling of loss factor curves obtained by Torsion-DMA of HTPB and GAP based binders manufactured with different curing agents and plasticizers
Seyidoglu, Tijen; Bohn, Manfred A. | Conference Paper |
| 2015 | Modelling of loss factors of elastomer binders of high explosive charges and composite rocket propellants to separate binder fractions with different molecular mobility used to follow ageing
Bohn, Manfred A. | Conference Paper |
| 2015 | Molding tools without sealing gaskets
Fürst, Tobias; Huber, Timo; Kuppinger, Jan; Henning, Frank | Journal Article |
| 2015 | Monitoring of bond-line stresses in case-bonded composite rocket propellants
Mußbach, Günter; Bohn, Manfred A. | Conference Paper |
| 2015 | Multi-modal dense sphere packing algorithm for the simulation of thermites
Günthner, Christian; Knapp, Sebastian; Weiser, Volker | Conference Paper |
| 2015 | Nanoporöse Multitalente
Polyzoidis, Angelos; Piscopo, Calogero Giancarlo; Löbbecke, Stefan | Journal Article |
| 2015 | Nanosilber-Systemtechnologie zur Vermeidung mikrobieller Materialzerstörung
Schmid, Helmut | Conference Paper |
| 2015 | Near infrared spectroscopy as a tool for in-line control of process and material properties of PLA biopolymer
Becker, Wolfgang; Inone-Kauffmann, Emilia R.; Eckl, Wilhelm; Eisenreich, Norbert | Journal Article |
| 2015 | Neue Elektrolyte zur Steigerung der Energiedichte einer nicht-wässrigen Vanadium-Acetylacetonat-Redox-Flow-Batterie
Herr, Tatjana | Dissertation |
| 2015 | New approaches to the CL-20/HMX cocrystal a less sensitive high power explosive
Herrmannsdörfer, Dirk; Herrmann, Michael; Heintz, Thomas | Conference Paper |
| 2015 | A new eye-safe UV Raman spectrometer for the remote detection of energetic materials in fingerprint concentrations: Characterization by PCA and ROC analyzes
Almaviva, S.; Chirico, R.; Nuvoli, M.; Palucci, A.; Schnurer, F.; Schweikert, W. | Journal Article |
| 2015 | A new mixing technology for plastic bonded explosives
Gerber, Peter; Happ, Andreas | Conference Paper |
| 2015 | Non-destructive method to follow ageing of solid propellant in rocket motors
Mußbach, Günter; Bohn, Manfred A. | Conference Paper |
| 2015 | A novel low-cost pre-concentrator concept to boost sensitivity and selectivity of gas sensor systems
Schütze, A.; Leidinger, M.; Schmitt, B.; Sauerwald, T.; Rieger, M.; Alepee, C. | Conference Paper |
| 2015 | Novel theoretical and computer-assisted modeling of isothermal and non-isothermal depolymerization kinetics
Bigger, S.W.; Cran, M.J.; Bohn, M.A. | Journal Article |
| 2015 | On the mechanism of zirconium nitride formation by zirconium, zirconia and yttria burning in air
Malikova, E.; Pautova, J.; Gromov, A.; Monogarov, K.; Larionov, K.; Teipel, U. | Journal Article |
| 2015 | Pair distribution function analysis of ammonium nitrate - evaluation of measuring systems for energetic materials
Kempa, Paul-Bernd; Herrmann, Michael | Conference Paper |
| 2015 | Parameterstudie zur thermochemischen Zersetzung organischer Materialien in geschmolzenen Salzen
Nieberl, Martin | Bachelor Thesis |
| 2015 | Phase change detection in neat and fiber reinforced polyamide 6 using dielectric analysis
Chaloupka, A.; Wedel, A.; Taha, I.; Rudolph, N.; Drechsler, K. | Conference Paper |
| 2015 | Polypropylene numerical photoageing simulation by dose - response functions with respect to irradiation and temperature
Geburtig, A.; Wachtendorf, Volker; Trubiroha, Peter; Zäh, Matthias; Schönlein, Artur; Müller, Axel; Vatahska, Teodora; Manier, Gerhard; Reichert, Thomas | Book Article |
| 2015 | Polyurethanes with components made of renewable resources and recyclates
Anders, T. | Presentation |
| 2015 | Post-Lithium-Ionen-Batterien
Tübke, J.; Hagen, M. | Book Article |
| 2015 | Preparation and characterization of foamed propellants using supercritical fluids
Kröber, Hartmut; Böhnlein-Mauß, Jutta | Conference Paper |
| 2015 | Presswerkzeuge ohne Dichtung
Fürst, Tobias; Huber, Timo; Kuppinger, Jan; Henning, Frank | Journal Article |
| 2015 | ProCycle. Analyse und toxikologische Bewertung von Stäuben aus Recycling- und Verwertungsprozessen von Nanocomposites und Strategien zur Gefährdungsminimierung
Guschin, Viktor; Marioth, Eric | Presentation |
| 2015 | Produktgestaltung in der Partikeltechnologie. Bd.7
: Teipel, Ulrich | Conference Proceedings |
| 2015 | Propellants
Gettwert, V.; Bohn, M.A.; Schubert, H. | Book Article |
| 2015 | Protecting the structural integrity of composites in fire: Intumescent coatings in the intermediate scale
Hörold, A.; Schartel, B.; Trappe, V.; Gettwert, V.; Korzen, M. | Journal Article |
| 2015 | Pyroorganic flares - state of the art and progress
Weiser, Volker; Roth, Evelin; Raab, Angelika; Knapp, Sebastian; Kelzenberg, Stefan; Eckl, Wilhelm | Conference Paper |
| 2015 | Rankine cycle for hybrid vehicles: The potential for CO2 emissions reduction
Kraljevic, I.; Kollmeier, H.-P.; Spicher, U. | Conference Paper |
| 2015 | Recomat-spectrometric application
Klahn, Thorsten; Zilly, Andreas; Schreiber, Achim; Deimling, Lukas | Conference Paper |
| 2015 | Results from miniaturized directed acoustic arrays
Armbrust, Torsten; Krebs, Heinrich; Neutz, Jochen; Walschburger, Erik; Eisenreich, Norbert | Conference Paper |
| 2015 | Review of some peculiarities of the stability and decomposition of HNF and ADN
Bohn, Manfred A. | Conference Paper |
| 2015 | Review of some peculiarities of the stability and decomposition of HNF and ADN
Bohn, Manfred A. | Conference Paper |
| 2015 | Review on ICT's research on scalable non-lethal launchers and projectiles
Armbrust, Torsten; Krebs, Heinrich; Neutz, Jochen; Scholz, Peter; Thiel, Klaus-Dieter; Zettl, Sebastian | Conference Paper |
| 2015 | Scale-up approaches for the ADN-prilling process by emulsion crystallization
Heintz, T.; Leisinger, K.; Roßmann, C. | Conference Paper |
| 2015 | Schaum aus dem Gelben Sack
Schneider, Anja; Mack, Christoph; Rapp, Florian | Journal Article |
| 2015 | Screening of natural lightweight fillers for sheet moulding compound in North America
Pierce, A.; Potyra, T.; Henning, F. | Conference Paper |
| 2015 | Self-propagating combustion synthesis of nanostructured particles
Imiolek, Andreas; Weiser, Volker; Kelzenberg, Stefan; Roth, Evelin; Lity, André | Conference Paper |
| 2015 | Sieving effects in electrical double-layer capacitors based on neat [Al(hfip)(4)](-) and [NTf2](-) ionic liquids
Roznyatovskaya, N.; Rupp, A.B.A.; Tübke, J.; Krossing, I. | Journal Article |
| 2015 | Simulation and experimental validation of gaps and bridging in the automated fiber placement process
Lichtinger, R.; Lacalle, J.; Hinterhölzl, R.; Beier, U.; Drechsler, K. | Journal Article |
| 2015 | Small scale motor tests of ADN/GAP based propellants
Gettwert, Volker; Fischer, Sebastian | Conference Paper |
| 2015 | Stability and characterization of GAP bonded ADN-propellant - the problem of gas formation during curing with isocyanates and characteristics of the glass-rubber transition
Bohn, Manfred A.; Gettwert, Volker | Conference Paper |
| 2015 | Stability of UiO-66 under acidic treatment: Opportunities and limitations for post-synthetic modifications
Piscopo, C.G.; Polyzoidis, A.; Schwarzer, M.; Loebbecke, S. | Journal Article |
| 2015 | Stand und Perspektiven von Redox-Flow-Batterien als stationäre Speicherlösungen
Tübke, J.; Noack, J.; Wietschel, L. | Journal Article |
| 2015 | Supported sulfonic acids: Solid catalysts for batch and continuous-flow synthetic processes
Piscopo, C.G. | Journal Article |
| 2015 | Synergists for Hexaphenoxycyclotriphosphazene in Cast PA6
Höhne, Carl-Christoph; Käbisch, Bert; Anders, Thorsten; Kroke, Edwin | Poster |
| 2015 | Synthesis and characterization of nitrate based energetic ionic liquids (EILs)
Schaller, Uwe; Keicher, Thomas; Weiser, Volker; Krause, Horst | Conference Paper |
| 2015 | Synthesis and test of suitable adsorbers for selectively trapping and detecting explosives and improvised explosives precursors from gasphase
Bunte, Gudrun; Hürttlen, Jürgen; Heil, Moritz; Rieger, Max; Krause, Horst | Conference Paper |
| 2015 | Systematische Untersuchung thermischer Prozesse für das Recycling von kohlenstofffaserverstärkten Kunststoffen
Benka, Christopher
: Manis, Frank (Betreuer) | Bachelor Thesis |
| 2015 | Thermodynamic derivation of open circuit voltage in vanadium redox flow batteries
Pavelka, M.; Wandschneider, F.; Mazur, P. | Journal Article |
| 2015 | Thermogravimetric study on the reaction of magnesium and aluminum in nitrogen
Kuchenreuther-Hummel, V.; Rozincsak, Linda; Neutz, Jochen | Conference Paper |
| 2015 | Thermoplastic composites in structural lightweight applications
Huber, T.; Henning, F.; Menrath, A.; Heinzle, V. | Conference Paper |
| 2015 | Trace gas VOC detection using metal-organic frameworks as pre-concentrators and semiconductor gas sensors
Leidinger, M.; Rieger, M.; Weishaupt, D.; Sauerwald, T.; Nägele, M.; Hürttlen, J.; Schütze, A. | Journal Article, Conference Paper |
| 2015 | Über 300.000 Kilometer unter Strom
Stella, Kevin; Wollersheim, Olaf; Fichtner, Wolf; Jochem, Patrick; Schücking, Maximilian; Nastold, Max; Ensslen, Axel; Wietschel, Martin; Held, Michael; Gnann, Till; Friedmann, Michael; Graf, Roberta; Wohlfarth, Katharina | Report |
| 2015 | Untersuchungen an a-C:H:Me beschichteten Substraten zur Eignung als alternatives Bipolarplattenmaterial für wässrige Vanadium Redox-Flow Batterien
Richards, Justin | Dissertation |
| 2015 | A vanadium redox flow battery for uninterruptible power supply applications
Buczkowski, T.; Noack, J.; Fischer, P.; Tübke, J.; Pinkwart, K. | Conference Paper |
| 2015 | Verbundvorhaben: Bioschaumplatten - Extrusionsgeschäumte, dickwandige Plattenelemente aus einem biobasierten, thermoplastischen Kunststoff
Wodke, Thomas; Rapp, Florian; Basler, Aaron; Maga, Daniel
: Erdmann, Rafael | Report |
| 2015 | Verfahren zur Gewinnung von aromatischen Verbindungen
Forstner, Jochen; Unser, Steffen; Schweppe, Rainer | Patent |
| 2015 | Verfahren zur Herstellung thermoplastischer Verbundbauteile
Wendel, Rainer; Arik, Cahit; Henning, Frank | Patent |
| 2015 | Verfahren zur Herstellung von Propen aus Propanol
Forstner, Jochen; Unser, Steffen; Böringer, Sarah | Patent |
| 2015 | Verfahren zur Konsolidierung von thermoplastitschen oder thermoelastischen Faserverbundstrukturen
Baumgärtner, Sebastian; Heinzle, Volker; Lohr, Christoph; Henning, Frank; Rampf, Wolf-Georg | Patent |
| 2015 | Verfahren zur Rückgewinnung von Wärme aus Verbrennungsmotoren sowie zur Umwandlung der rückgewonnenen Wärme in mechanische Energie
Kollmeier, Hans-Peter; Kraljevic, Ivica; Rohrpasser, Christian; Striebich, Helmut | Patent |
| 2015 | Verkürzung von Prozessketten am Beispiel des Direkt-SMC-Prozesses
Keckl, C. | Conference Paper |
| 2015 | Wetting of oxidizer particles by binder and plasticizer molecules - microcalorimetry experiments and computer simulations
Nardai, Michael M.; Bohn, Manfred A. | Conference Paper |
| 2015 | Widely tuneable quantum cascade lasers for spectroscopic sensing
Wagner, J.; Ostendorf, R.; Grahmann, Jan; Merten, André; Hugger, S.; Jarvis, J.P.; Fuchs, F.; Boskovic, D.; Schenk, Harald | Conference Paper |
| 2015 | X-Bond - Entkleben unter Nutzung exothermer Reaktionen
Winkel, A.; Kahlmeyer, M.; Böhm, S.; Sims, S.; Gettwert, V.; Urban, H. | Conference Paper |
| 2014 | 3. Symposium Rohstoffeffizienz und Rohstoffinnovationen 2014
: Teipel, Ulrich; Reller, Armin | Conference Proceedings |
| 2014 | 3D tomographic characterization of sandwich structures
Dietrich, Stefan; Weidenmann, Kay; Elsner, Peter | Journal Article |
| 2014 | Activation energies for the decomposition of nitrate ester groups at the anhydroglucopyranose ring positions C2, C3 and C6 of nitrocellulose using the nitration of a dye as probe
Moniruzzaman, Mohammed; Bellerby, John M.; Bohn, Manfred A. | Journal Article |
| 2014 | Aging of ADN rocket propellant formulations with desmophen®-based elastomer binder
Cerri, S.; Bohn, M.A.; Menke, K.; Galfetti, L. | Journal Article |
| 2014 | Alt-Handy-Recycling - Eine neue Rohstoffquelle
Teipel, U.; Wolf, S.; Köpnick, H.; Bischlager, O.; Daehn, C. | Conference Paper |
| 2014 | Aluminum nanoparticles application to energetic systems - new horizons or sunset?
Gromov, Alexander; Teipel, Ulrich; Luca, L. de | Conference Paper |
| 2014 | Application of micro-Raman spectroscopy for fight against terrorism and smuggling
Almaviva, S.; Botti, S.; Palucci, A.; Puiu, A.; Schnürer, F.; Schweikert, W.; Romolo, F.S. | Journal Article |
| 2014 | Atomistic simulation of the temperature dependence of density and van-der-Waals interactions of binders, plasticizers and mixtures of them
Bohn, Manfred A.; Evangelisti, Camilla; Klapötke, Thomas M. | Conference Paper |
| 2014 | Atomistic simulation of the temperature dependence of density and van-der-Waals interactions of binders, plasticizers and mixtures of them
Bohn, Manfred A.; Evangelisti, Camilla; Klapötke, Thomas M. | Conference Paper |
| 2014 | Aufbereitung nachwachsender Rohstoffe durch Zerkleinerung
Eisenlauer, M.; Teipel, U. | Abstract |
| 2014 | Aufbereitung von sekundären mineralischen Baustoffen
Teipel, U. | Journal Article |
| 2014 | Benetzungsverhalten von Kohlenstoff-Nanoröhren
Dresel, A.; Teipel, U. | Journal Article |
| 2014 | Benetzungsverhalten von Kohlenstoffnanoröhren
Dresel, A.; Teipel, U. | Journal Article |
| 2014 | Benetzungsverhalten von mineralischen Sekundärrohstoffen
Hennig, M.; Teipel, U. | Conference Paper |
| 2014 | Biopolymer foams - relationship between material characteristics and foaming behavior of cellulose based foams
Rapp, F.; Schneider, A.; Elsner, P. | Conference Paper |
| 2014 | Bodengranulat zur reversiblen Speicherung von Wasser und Verfahren zu dessen Herstellung
Schmid, Helmut; Narayana, Ida-Bagus Kesawa; Braun, Monika | Patent |
| 2014 | Brennkraftmaschine und Verfahren zu ihrem Betrieb
Schwaibold, Steffen; Fischer, Michael; Kraljevic, Ivica | Patent |
| 2014 | Burning behaviour of aluminium and its hydride in an ADN/GAP-matrix
Franzin, Andrea; Weiser, Volker; Gettwert, Volker; Luca, L. de; Roth, Evelin; Kelzenberg, Stefan; Poth, H.; Bieroth, D. | Conference Paper |
| 2014 | Burning behaviour of B/KDN-mixtures compared with B/KNO3
Weiser, Volker; Lity, André; Kelzenberg, Stefan; Koleczko, Andreas; Roth, Evelin; Schaller, Uwe; Walschburger, Erik | Conference Paper |
| 2014 | Cell energy density and electrolyte/sulfur ratio in Li-S cells
Hagen, M.; Fanz, P.; Tübke, J. | Journal Article |
| 2014 | Chain alignment for improved properties - optimization of PLA and PHB-V by crystallization and reinforcement
Moser, K.; Bergmann, B.; Diemert, J.; Elsner, P. | Conference Paper |
| 2014 | Characterisation of enhanced blast formulations with different methods
Gerber, Peter; Aurich, Hagen; Happ, Andreas; Sättler, Axel | Conference Paper |
| 2014 | Characterization of ADN/GAP-based and ADN/desmophen-based propellant formulations and comparison with AP analogues
Cerri, Sara; Bohn, Manfred A.; Menke, Klaus; Galfetti, Luciano | Journal Article |
| 2014 | Characterization of high-pressure resin transfer molding process variants for manufacturing high-performance composites
Chaudhari, Raman | Dissertation |
| 2014 | Charakterisierung von Bariumstrontiumtitanat-Partikeln mithilfe der Röntgenbeugung
Herrmann, Michael; Förter-Barth, Ulrich; Roßmann, Christian; Teipel, Ulrich | Journal Article |
| 2014 | Combustion Features of ADN-Based Solid Rocket Propellants for Space Applications
Luca, L.T. de; Palmucci, I.; Franzin, A.; Trache, D.; Pang, W.-Q.; Weiser, V. | Conference Paper |
| 2014 | Comparison of experimental and theoretical pair distribution functions of ammonium nitrate
Kempa, Paul-Bernd; Herrmann, Michael | Conference Paper |
| 2014 | Compressibility and permeability of fiber reinforcements for pultrusion
Bezerra, R.; Wilhelm, F.; Henning, F. | Conference Paper |
| 2014 | Conductive polymer composites and coated metals as alternative bipolar plate materials for all-vanadium redox-flow batteries
Caglar, B.; Richards, J.; Fischer, P.; Tuebke, J. | Journal Article |
| 2014 | Continuous supercritical hydrothermal synthesis of iron oxide nanoparticle dispersions and their characterization
Daschner de Tercero, M.; Röder, C.; Fehrenbacher, U.; Teipel, U.; Türk, M. | Journal Article |
| 2014 | A coupled-physics model for the vanadium oxygen fuel cell
Wandschneider, F.T.; Küttinger, M.; Noack, J.; Fischer, P.; Pinkwart, K.; Tübke, J.; Nirschl, H. | Journal Article |
| 2014 | Deflagration And Detonation Of Mixtures Of Ammonium Or Urea Nitrates With An Energetic Thermoplastic Elastomer
Quaresma, J.; Pineiro, M.; Campos, J.; Keicher, T.; Krause, H. | Conference Paper |
| 2014 | Detonation measurements using single optical fibers
Campos, Jose; Mendes, R.; Quaresma, J.; Anastacio, A.; Keicher, Thomas; Deimling, Lukas; Krause, Horst | Conference Paper |
| 2014 | Development and characterization of a 280 cm2 vanadium/oxygen fuel cell
Noack, J.; Cremers, C.; Bayer, D.; Tübke, J.; Pinkwart, K. | Journal Article |
| 2014 | The development of a modular synthesis of teraryl-based alpha-helix mimetics as potential inhibitors of protein-protein interactions
Trobe, M.; Peters, M.; Grimm, S.H.; Breinbauer, R. | Journal Article |
| 2014 | Development of anodic materials with elevated hydrogen sulfide tolerance for HT-PEMFCs using reformat
Rau, M.S.; Cremers, C.; Pinkwart, K.; Tübke, J. | Conference Paper |
| 2014 | Development of carbon nanotube and graphite filled polyphenylene sulfide based bipolar plates for all-vanadium redox flow batteries
Caglar, B.; Fischer, P.; Kauranen, P.; Karttunen, M.; Elsner, P. | Journal Article |
| 2014 | Development of graphite and carbon nanotube filled thermoplastic based bipolar plates for all-vanadium redox flow batteries
Caglar, Burak | Dissertation |
| 2014 | Druckfiltration von Kohlenstoffnanoröhren-Suspensionen
Dresel, A.; Teipel, U. | Journal Article |
| 2014 | Eine dufte Technik
Just, D.; Diemert, J. | Journal Article |
| 2014 | Dynamisch-physikalische Modellierung von Siebklassierprozessen
Hennig, M.; Elskamp, F.; Kruggel-Emden, H.; Teipel, U. | Journal Article |
| 2014 | Dynamische Modellierung von Siebklassierprozessen
Hennig, M.; Teipel, U. | Abstract |
| 2014 | Effect of boron addition on micro-aluminum-particle-based multifunctional high-temperature coatings
Roussel Garcia, Raquel; Kolarik, Vladislav; Juez-Lorenzo, Maria; Fietzek, Harald | Journal Article |
| 2014 | Effect of mobile phone radiation on the human body and textile remedies
Roy, T.; Govekar, A.; Rajpurohit, A. | Journal Article |
| 2014 | Effiziente Recyclingverfahren für Altbatterien
Kross, S.; Teipel, U.; Würfel, K. | Journal Article |
| 2014 | Effizientes Rohstoffrecycling? Beurteilung von Verfahrenstechnologien zur Verwertung von Lithiumbatterien und -akkumulatoren
Würfel, K.; Kross, S.; Teipel, U. | Conference Paper |
| 2014 | Einfluss lokaler Endlosfaserverstärkungen auf das Eigenschaftsprofil struktureller Spritzgießbauteile
Huber, Timo | Dissertation |
| 2014 | Electrooxidation of ethanol at room temperature on carbon-supported Pt and Rh-containing catalysts: A DEMS study
Bach Delpeuch, A.; Asset, T.; Chatenet, M.; Cremers, C. | Journal Article |
| 2014 | Elektrische Leitfähigkeit von Polypropylen-CNT-Kompositbauteilen in Abhängigkeit des Kristallisationsgrades
Imiolek, A.I.; Guschin, V.G.; Becker, W.B.; Weiss, P.W.; Teipel, U.T. | Journal Article |
| 2014 | Elektrochemische Detektion von Explosivstoffen im Meer
Rabenecker, P.; Pinkwart, K. | Book Article |
| 2014 | Elektrochemischer Gassensor, Verfahren zu dessen Herstellung und dessen Verwendung
Baltes, Norman; Pinkwart, Karsten; Fischer, Peter | Patent |
| 2014 | Energetic Materials. Particles, Processing, Applications
| Conference Proceedings |
| 2014 | Entwicklung eines Ecodesign-Tools für die Luftfahrtindustrie
Wimmer, A.-K.; Salles, A.; Müller, T. | Conference Paper |
| 2014 | Entwicklung eines Ecodesign-Tools für die Luftfahrtindustrie
Wimmer, A.-K.; Salles, A.; Müller, T. | Conference Paper |
| 2014 | Environmentally-friendly, heat-resistant profiles
Moser, Kevin; Holzer, Andrei; Bergmann, Björn | Journal Article |
| 2014 | Evaluation of GA/BAMO-copolymer binder for AL/AP-based propellants
Gettwert, Volker; Keicher, Thomas; Franzin, Andrea; Jung, Marcus; Weiser, Volker | Conference Paper |
| 2014 | Evaluation of process induced residual stresses in continuous fiber-reinforced hybrid thermoplastic composites
Paul, H.; Schweizer, F.; Hangs, B. | Conference Paper |
| 2014 | Even lighter
Keckl, Christoph; Kuppinger, Jan; Henning, Frank | Journal Article |
| 2014 | Eye-safe UV Raman spectroscopy for remote detection of explosives and their precursors in fingerprint concentration
Almaviva, S.; Angelini, F.; Chirico, R.; Palucci, A.; Nuvoli, M.; Schnuerer, F.; Schweikert, W.; Romolo, F.S. | Conference Paper |
| 2014 | Foam-injected sandwich panels with continuous-reinforced facings
Menrath, A.; Henning, F.; Huber, T.; Roch, A.; Riess, C. | Conference Paper |
| 2014 | Foreword
Manelis, G.; Schubert, H. | Journal Article |
| 2014 | Future flare compositions
Lingen, J.N.J. van; Meuken, D.; Hackspik, M.M.; Mäkeläinen, T.; Weiser, V.; Poulson, G.W. | Conference Paper |
| 2014 | Generation of very fine ammonium dinitramide (ADN) paricles by bead milling technology
Roßmann, Christian; Heintz, Thomas; Herrmann, Michael | Conference Paper |
| 2014 | Gewinnung Mikrofibrillierter Cellulose (MFC) durch mechanischen Aufschluss
Köster, A.; Förter-Barth, U.; Herrmann, M.; Schweppe, R.; Teipel, U. | Conference Paper |
| 2014 | Handy clever entsorgen
Gantner, O.; Köpnick, H.; Bischlager, O.; Teipel, U.; Hagelüken, C.; Reller, A. | Conference Paper |
| 2014 | Heat storage by zeolites: A small scale demonstration
Elsner, Peter; Epple, Boris; Kollmeier, H.P.; Merkel, S.; Simsek, A.; Eckl, Wilhelm; Pappert, Sandra; Neutz, Jochen | Abstract |
| 2014 | Herstellung von Nanocellulose durch mechanischen Aufschluss
Köster, Alexander; Förter-Barth, Ulrich; Herrmann, Michael; Schweppe, Rainer; Teipel, Ulrich | Journal Article |
| 2014 | Hexamethoxycyclotriphosphazene as a flame retardant for polyurethane foams
Käbisch, B.; Fehrenbacher, U.; Kroke, E. | Journal Article |
| 2014 | High-voltage ignition of thermite deposits
Knapp, Sebastian; Weiser, Volker; Kelzenberg, Stefan; Roth, Evelin; Raab, Angelika; Eckl, Wilhelm | Conference Paper |
| 2014 | Holistic and consistent design process for hollow structures based on braided textiles and RTM
Gnädinger, Florian; Karcher, Michael; Henning, Frank; Middendorf, Peter | Journal Article |
| 2014 | Hot-spot modelling of propellant regression
Knapp, Sebastian; Eisenreich, Norbert; Kelzenberg, Stefan; Weiser, Volker | Conference Paper |
| 2014 | HTPB bonded pyro-organic spectral flares
Roth, Evelin; Weiser, Volker; Raab, Angelika; Lity, André | Conference Paper |
| 2014 | Hydrothermal carbonization (HTC): Near infrared spectroscopy and partial least-squares regression for determination of selective components in HTC solid and liquid products derived from maize silage
Reza, M.T.; Becker, W.; Sachsenheimer, K.; Mumme, J. | Journal Article |
| 2014 | ICT-cellular-combustion-algorithm (ICCA) application to the combustion of complex shaped propellants
Wurster, Sebastian; Fischer, Thomas | Conference Paper |
| 2014 | Ignition of hydrogen jet fires from high pressure storage
Kessler, A.; Schreiber, A.; Wassmer, C.; Deimling, L.; Knapp, S.; Weiser, V.; Sachsenheimer, K.; Langer, G.; Eisenreich, N. | Journal Article |
| 2014 | Improvement of mechanical properties by additive assisted laser sintering of PEEK
Kroh, M.; Bonten, C.; Eyerer, P. | Conference Paper |
| 2014 | Improving composite process efficiency on a structural frame for a commercial truck storage door
Ruby, M.; Reif, M.; Begert, M.; Gerster, M.; Schneider, E.; Joppich, T.; Baumgärtner, S. | Conference Paper |
| 2014 | Increasing the energy density of the non-aqueous vanadium redox flow battery with the acetonitrile-1,3-dioxolane-dimethyl sulfoxide solvent mixture
Herr, T.; Fischer, P.; Tübke, J.; Pinkwart, K.; Elsner, P. | Journal Article |
| 2014 | Influence of an optimized 3D-reinforcement layout on the structural mechanics of co-bonded CFRP joints
Jürgens, M.; Nogueira, A.C.; Lang, H.; Hombergsmeier, E.; Drechsler, K. | Conference Paper |
| 2014 | Influence of isothermal ageing on the mechanical properties of HTPB-bonded composite rocket propellants expressed as master curves of torsion DMA measurements
Mußbach, Günter; Bohn, Manfred A. | Conference Paper |
| 2014 | Influence of isothermal ageing on the mechanical properties of HTPB-bonded composite rocket propellants expressed as master curves of torsion DMA measurements
Mußbach, Günter; Bohn, Manfred A. | Conference Paper |
| 2014 | Inline-Prozessanalyse chemischer Mikroreaktionsprozesse mittels MIR-Laserspektroskopie
Boskovic, D.; Schweikert, W.; Panic, S.; Schwan, K.; Löbbecke, S. | Journal Article |
| 2014 | Investigación de recubrimientos multifuncionales en base de micropartículas esféricas de aluminio para aplicación a altas temperatur
Roussel Garcia, Raquel | Dissertation |
| 2014 | Investigating cavity pressure behavior in high-pressure RTM process variants
Rosenberg, P.; Chaudhari, R.; Karcher, M.; Henning, F.; Elsner, P. | Conference Paper |
| 2014 | Investigation of quality and reproducibility of foamed propellants
Böhnlein-Mauß, Jutta; Kröber, Hartmut | Conference Paper |
| 2014 | Investigation of the effect of ageing of RDX containing HTPB and GAP bonded high explosive charges on their thermal and shock sensitivity
Bohn, Manfred A.; Borne, L.; Herrmann, Michael; Gerber, Peter; Kaiser, M. | Presentation |
| 2014 | Investigation of the nitrate based EIL 4-Amino-1-methyl-1,2,4- triazolium nitrate as a plasticizer
Schaller, Uwe; Weiser, Volker; Keicher, Thomas; Krause, Horst | Conference Paper |
| 2014 | Investigation of the Shear Thinning Behavior of Epoxy Resins for Utilization in Vibration Assisted Liquid Composite Molding Processes
Meier, R.; Kirdar, C.; Rudolph, N.; Zaremba, S.; Drechsler, K. | Conference Paper |
| 2014 | Kategorisierung der Schülerlabore - Schülerlabor mit Berufsorientierung
Krause, D.; Martin, U. | Journal Article |
| 2014 | Kohlenstofffasern wiedergewinnen
Emmerich, Rudolf; Kuppinger, Jan | Journal Article |
| 2014 | Kontinuierliche Verfolgung von Fouling-Prozessen in Rohrreaktoren 229 mittels Wärmefluss-Sensorik
Antes, J.; Löbbecke, S.; Jentner, D. | Conference Paper |
| 2014 | Lab2Venture – Unternehmerisches Denken und Handeln in Schülerlaboren
Parrisius, M.; Krause, D. | Journal Article |
| 2014 | Leichtbau - Trends und Zukunftsmärkte und deren Bedeutung für Baden-Württemberg
: Thielmann, Axel; Seeliger, Wolfgang; Günther, Bele; Schneider, Marco (Red.); Birenbaum, Christoph (Red.); Stroka, Michael (Red.) | Study |
| 2014 | Leichtbaupotenziale durch faserverstärkte Schäume
Roch, A.; Menrath, A.; Huber, T. | Journal Article |
| 2014 | LFT foam - lightweight potential for semi-structural components through the use of long-glass-fiber-reinforced thermoplastic foams
Roch, A.; Huber, T.; Henning, F.; Elsner, P. | Conference Paper |
| 2014 | Lightweight Wheel. Lightweight Wheel-Phase 2 1 and 2 1 ext
Bücheler, David | Report |
| 2014 | Lignin matrix composites from natural resources - ARBOFORMR®
Nägele, H.; Pfitzer, J.; Ziegler, L.; Inone-Kauffman, E.R.; Eckl, W.; Eisenreich, N. | Book Article |
| 2014 | Mapping nutrient resorption efficiencies of subarctic cryptogams and seed plants onto the Tree of Life
Lang, Simone I.; Aerts, Rien; Logtestijn, Richard S.P. van; Schweikert, W.; Klahn, Thorsten; Quested, Helen M.; Hal, Jürgen R. van; Cornelissen, Johannes H.C. | Journal Article |
| 2014 | Mass spectrometric investigation of ethanol and acetaldehyde adsorbates electrooxidation on Pt electrocatalyst
Bach Delpeuch, A.; Chatenet, M.; Cremers, C.; Tübke, T. | Journal Article |
| 2014 | Metal nanopowders : production, characterization, and energetic applications
: Gromov, A.; Teipel, U. | Book |
| 2014 | Micro-morphology of nitrocellulose in gun propellants
Böhnlein-Mauß, Jutta; Helfrich, Mathias | Conference Paper |
| 2014 | Microstructure of NC-propellants investigated by x-ray diffraction (Part II)
Herrmann, Michael; Förter-Barth, Ulrich; Kaiser, Manfred; Kupzik, Klaus; Scheibel, Rudolf | Conference Paper |
| 2014 | Microwave heated beads as selective adsorbents for large volume sampling
Heil, Moritz; Hürttlen, Jürgen; Bunte, Gudrun; Krause, Horst | Conference Paper |
| 2014 | Model of a vanadium redox flow battery with an anion exchange membrane and a Larminie-correction
Wandschneider, F.T.; Finke, D.; Grosjean, S.; Fischer, P.; Pinkwart, K.; Tübke, J.; Nirschl, H. | Journal Article |
| 2014 | Modeling ignition and thermal wave progression in binary granular pyrotechnic compositions
Knapp, Sebastian; Weiser, Volker; Kelzenberg, Stefan; Eisenreich, Norbert | Journal Article |
| 2014 | Modelling of the consumption of a dye used to probe the decomposition of nitrocellulose
Bohn, Manfred A.; Moniruzzaman, Mohammed; Bellerby, John | Presentation |
| 2014 | Modification of the mechanical granule properties via internal structure
Eckhard, Susanna; Fries, Manfred; Teipel, Ulrich; Antonyuk, Sergiy; Heinrich, Stefan | Journal Article |
| 2014 | Monitoring of reinforced composites processed by microwave radiation using fiber-Bragg gratings
Barrera, D.; Roig, I.; Sales, S.; Emmerich, R. | Conference Paper |
| 2014 | A multi-stack simulation of shunt currents in vanadium redox flow batteries
Wandschneider, F.T.; Röhm, S.; Fischer, P.; Pinkwart, K.; Tübke, J.; Nirschl, H. | Journal Article |
| 2014 | Multifunctional composites
Hübner, Christof | Journal Article |
| 2014 | Multifunctional composites based on polypropylene with excellent electrical, thermal and structural properties
Hübner, C.; Sathyanarayana, S. | Conference Paper |
| 2014 | Multiple headspace extraction for gas detection in ionic liquids
Müller, D.; Fühl, M.; Pinkwart, K.; Baltes, N. | Journal Article |
| 2014 | Nanometals in energetic systems: Achievements and future
Gromov, A.; DeLuca, L.T.; Il'in, A.P.; Teipel, U.; Petrova A.; Prokopiev, D. | Journal Article |
| 2014 | Neue Composite-Raketenfesttreibstoffe für taktische Raketenantriebe - rauchfrei, schnellbrennend und leistungsstark
Gettwert, V.; Keicher, T.; Heintz, T.; Weiser, V. | Book Article |
| 2014 | Neue Verfahren zur Verwertung von Verbundwerkstoffen
Woidasky, Jörg M. | Conference Paper |
| 2014 | New energetic thermoplastic elastomers for pressed explosive charges
Holler, Marcel; Keicher, Thomas; Gerber, Peter; Happ, Andreas; Klapötke, Thomas M.; Stierstorfer, Jörg | Conference Paper |
| 2014 | New version of the ICT-thermodynamic code
Kelzenberg, Stefan; Kempa, Paul-Bernd; Wurster, Sebastian; Herrmann, Michael; Fischer, Thomas | Conference Paper |
| 2014 | Nitration chemistry in continuous flow using acetyl nitrate
Antes, Jürgen; Janitschek, Wieland; Keicher, Thomas; Löbbecke, Stefan | Conference Paper |
| 2014 | Noch weniger Gewicht
Keckl, Christoph; Kuppinger, Jan; Henning, Frank | Journal Article |
| 2014 | Numerical investigation on the structural mechanics of a joining technique for composite materials: The redundant high efficiency assembly
Lang, H.; Nogueira, A.C.; Jürgens, M.; Hombergsmeier, E.; Drechsler, K. | Conference Paper |
| 2014 | On the kinetics of AlH3 decomposition and the subsequent Al oxidation
Eisenreich, N.; Keßler, A.; Koleczko, A.; Weiser, V. | Journal Article |
| 2014 | On-line vs off-line electrical conductivity characterization. Polycarbonate composites developed with multiwalled carbon nanotubes by compounding technology
Llorens-Chiralt, R.; Weiss, P.; Mikonsaari, I. | Conference Paper |
| 2014 | Overview of the German gel propulsion technology program
Ciezki, H.K.; Negri, M.; Hürttlen, J.; Weiser, V.; Naumann, K.W.; Ramsel, J. | Conference Paper |
| 2014 | Particle size adjustment of spherical ammonium dinitramide particles (ADN-Prills) produced by emulsion crystallization
Heintz, Thomas; Reinhard, Werner; Birke, Christoph; Leisinger, Karlfred | Conference Paper |
| 2014 | Partikeltechnologie
Teipel, U.; Weber, A. | Journal Article |
| 2014 | Passivation of Metal Nanopowders
Gromov, A.; Il'in, A.; Teipel, U.; Pautova, J. | Book Article |
| 2014 | Polymere Flammschutzmittel, Verfahren zu deren Herstellung und flammgeschützte Polymersysteme
Barner, Leonie; Eisenblätter, Jördis; Fehrenbacher, Ulrich; Barner-Kowollik, Christopher; Lang, Christiane | Patent |
| 2014 | Pretreatment of biogenic raw materials
Chairopoulou, M.A.; Eisenlauer, M.; Teipel, U.; Schweppe, R. | Conference Paper |
| 2014 | Problems and faulty uses with the Prout-Tompkins description of autocatalytic reactions and the solutions
Bohn, Manfred A. | Journal Article |
| 2014 | Process development of injection molded parts with wound fiber structures for local reinforcement
Heinzle, V.; Huber, T.; Henning, F.; Elsner, P. | Conference Paper |
| 2014 | Process efficiency improvements for a structural doorframe support panel molded from unidirectional E-glass/polypropylene composite tapes
Eastep, D.; Reif, M.; Begert, M.; Gerster, M.; Schneider, E.; Joppich, T.; Baumgärtner, S. | Conference Paper |
| 2014 | Produktgestaltung mit Sekundärrohstoffen aus der Baustoff- und Keramikindustrie
Teipel, U. | Conference Paper |
| 2014 | Proximal detection of energetic materials on fabrics by UV-Raman spectroscopy
Chirico, R.; Almaviva, S.; Colao, F.; Fiorani, L.; Nuvoli, M.; Schweikert, W.; Schnürer, F.; Cassioli, L.; Grossi, S.; Mariani, L.; Angelini, F.; Menicucci, I.; Palucci, A. | Conference Paper |
| 2014 | Pultrusion of flax/poly(lactic acid) commingled yarns and nonwoven fabrics
Linganiso, L.Z.; Bezerra, R.; Bhat, S.; John, M.; Braeuning, R.; Anandjiwala, R.D. | Journal Article |
| 2014 | Quantification of local fiber distribution for optimization of tape laying techniques
Guglhoer, T.; Manger, F.; Sause, M.G.R. | Conference Paper |
| 2014 | Raman Spectroscopy Study on the Addition of Peroxides as a Dispersing Additive in Multiwalled Carbone Nanotube Reinforced Polypropylene Composites
Sathyanarayana, S.; Olowojoba, G.; Hübner, C.; Diemert, J.; Pötschke, P.; Henning, F. | Conference Paper |
| 2014 | Rapid deployable ballistic barriers based on airbag systems
Roussel Garcia, Raquel; Bernewitz, Johanna; Neutz, Jochen | Conference Paper |
| 2014 | Reactions of magnesium in different atmospheres
Rozincsak, Linda; Eisenreich, Norbert; Neutz, Jochen; Roussel Garcia, Raquel | Conference Paper |
| 2014 | Reactions of metal carbides in different atmospheres
Rozincsak, Linda; Eisenreich, Norbert; Neutz, Jochen; Roussel Garcia, Raquel | Conference Paper |
| 2014 | Recent achievements in kinetic modeling of stabilizer consumption in NC-based propellants
Bohn, M.A. | Conference Paper |
| 2014 | Recent achievements in kinetic modelling of stabilizer consumption and molar mass degradation in NC-based propellants
Bohn, Manfred A. | Conference Paper |
| 2014 | Recent improvements within the testing and certification process of explosive detection systems as basis of a harmonized european test regime
Röseling, D.; Schnürer, F.; Heil, M.; Rieger, M.; Ulrich, C.; Krause, H. | Conference Paper |
| 2014 | Recovering carbon fibers
Emmerich, Rudolf; Kuppinger, Jan | Journal Article |
| 2014 | Recycling von Weichschaumpolyurethan aus Flugzeugsitzen mittels Glykolyse
Hanich, Ronny | Master Thesis |
| 2014 | Reibenergieverteilungen von Mahlkugelkontakten
Köster, Alexander; Scherge, Matthias; Teipel, Ulrich | Journal Article |
| 2014 | Reibenergieverteilungen von Mahlkugelkontakten
Köster, A.; Scherge, M.; Teipel, U. | Conference Paper |
| 2014 | Simulation of propellant combustion using the ICT-cellular-combustion-algorithm (ICCA)
Wurster, S.; Fischer, T.S. | Conference Paper |
| 2014 | Size effects of self-assembled block copolymer spherical micelles and vesicles on cellular uptake in human colon carcinoma cells
Chang, T.; Lord, M.S.; Bergmann, B.; Macmillan, A.; Stenzel, M.H. | Journal Article |
| 2014 | Size Matters! On the way to ionic liquid systems without ion pairing
Rupp, A.; Roznyatovskaya, N.; Scherer, H.; Beichel, W.; Klose, P.; Sturm, C.; Hoffmann, A.; Tübke, J.; Koslowski, T.; Krossing, I. | Journal Article |
| 2014 | Snow as a paradigm for acoustic absorbers
Maysenhölder, Waldemar; Mikonsaari, Irma | Conference Paper |
| 2014 | Solid state electrolytes for ambient and middle temperature next generation electrochemical storage systems
Ahlbrecht, K.; Holzapfel, M.; Tübke, J.; Hoffmann, M.J. | Conference Paper |
| 2014 | Spectroscopy of pyrotechnic tracer compositions under different pressure
Weiser, Volker; Knapp, Sebastian; Roth, E.; Raab, Angelika; Kelzenberg, Stefan; Cegiel, D. | Conference Paper |
| 2014 | Studies on preventing Li dendrite formation in Li-S batteries by using pre-lithiated Si microwire anodes
Hagen, M.; Quiroga-González, E.; Dörfler, S.; Fahrer, G.; Tübke, J.; Hoffmann, M.J.; Althues, H.; Speck, R.; Krampfert, M.; Kaskel, S.; Föll, H. | Journal Article |
| 2014 | Synthesis and characterization of polymers with phosphorus side chains
Eisenblätter, Jördis | Dissertation |
| 2014 | Synthesis and properties of random co-polymer poly-(GA/BAMO) as energetic binder
Keicher, Thomas; Janitschek, Wieland; Schaller, Uwe; Krause, Horst; Kaiser, M. | Conference Paper |
| 2014 | Synthesis and test of suitable adsorbers for selectively trapping and detecting explosives and improvised explosives precursors from air
Bunte, G.; Hürttlen, J.; Heil, M.; Rieger, M.; Krause, H. | Conference Paper |
| 2014 | Synthesis of polymer particles and capsules employing microfluidic techniques
Boskovic, D.; Loebbecke, S. | Journal Article |
| 2014 | Thermal decomposition of nano-structured carbon
Eisenreich, Norbert; Kelzenberg, Stefan; Knapp, Sebastian; Koleczko, Andreas; Schuppler, Heike; Weiser, Volker | Conference Paper |
| 2014 | Thermoplastische Faserverbundkunststoffe - Vom Tape zum strukturellen Bauteil am Beispiel eines Versteifungsinlays für eine LKW-Staufachklappe
Baumgärtner, S.; Henning, F.; Joppich, T.; Hangs, B.; Huber, T.; Manger, F.; Begert, M.; Reif, M. | Conference Paper |
| 2014 | Trikresylphoshat-freies Öl, Schmierstoff oder Turbinenöl
Schmid, Helmut; Eckl, Wilhelm; Moriske, Heinz-Jörn | Patent |
| 2014 | Umweltfreundliche, wärmeformbeständige Profile
Moser, Kevin; Holzer, Andrei; Bergmann, Björn | Journal Article |
| 2014 | Use of unidirectional thermoplastic composite tapes to reduce mass & improve performance of a steel doorframe support on a commercial truck
Clark, G.; Reif, M.; Begert, M.; Gerster, M.; Schneider, E.; Joppich, T.; Baumgärtner, S. | Conference Paper |
| 2014 | Variation der mechanischen Eigenschaften von Sprühgranulaten über die innere Struktur
Eckhard, Susanna; Fries, Manfred; Teipel, Ulrich | Journal Article |
| 2014 | Verfahren und Vorrichtung zur Bestimmung eines Rohstoffgehaltes in einem Gebäude
Woidasky, Jörg; Sevilmis, Neyir; Ritz, Martin | Patent |
| 2014 | Verfahren und Vorrichtung zur Ermittlung der Zündgrenzen von Gasgemischen
Müller, Dominik; Abert, Michael; Berger, Thomas; Krampfert, Matthias; Bayha, Thomas | Patent |
| 2014 | Verfahren zur Herstellung eines elektrisch leitfähigen Kunststoff-Werkstoffes und dessen Verwendung sowie solchermaßen hergestellter Kunststoff-Werkstoff
Diemert, Jan; Hübner, Christof; Sathyanarayana, Shyam; Weiss, Patrick; Just, Daniel | Patent |
| 2014 | Verfahren zur Herstellung eines Polyurethan-Blockschaumstoffes
Hohenhorst, Manfred; Kugler, Michael; Fehrenbacher, Ulrich; Stricker, Matthias; Schäfer, Kai; Giesker, Christian | Patent |
| 2014 | Verfahren zur Rückgewinnung von Fasern aus Bauteilen oder Produkten aus Kunststoff-Faserverbundmaterialien
Woidasky, Jörg; Seiler, Elisa | Patent |
| 2014 | Vorrichtung zur Herstellung von thermoplastischen und/oder thermoelastischen Polymer-Formteilen
Diemert, Jan; Huber, Timo; Roch, Alexander; Anselment, Christian | Patent |
| 2014 | Wegweisend: Fertigung thermoplastischer und duromerer Bauteile aus Faserverbundkunststoffen
Baumgärtner, Sebastian; Joppich, Tobias | Book Article |
| 2014 | Wertschöpfungspotenziale im Leichtbau und deren Bedeutung für Baden-Württemberg
: Thielmann, Axel; Lerch, Christian; Seeliger, Wolfgang; Bele, Günther; Zanker, Christoph; Jäger, Angela; Keckl, Christoph; Kuppinger, Jan; Henning, Frank; Stroka, Michael (Red.); Schneider, Marco (Red.); Birenbaum, Christoph (Red.); Fleischer, Jürgen; Lanza, Gisela; Baumann, Florian; Kopf, Robin; Krämer, Alexandra; Wagner, Henning | Study |
| 2014 | Wind Blades Using Cost-Effective Advanced Lightweight Design
Heinzle, V.; Rapp, F.; Huber, T.; Knudsen, H. | Conference Paper |
| 2014 | X-ray-absorption measurements of explosives and the effective atomic number ZEFF
Herrmann, Michael; Förter-Barth, Ulrich; Heintz, Thomas; Röseling, Dirk; Krause, H. | Conference Paper |
| 2014 | Zur Energie der Mahlkörperreibung
Köster, A.; Scherge, M.; Teipel, U. | Journal Article |
| 2013 | 1,3-Dioxolane, tetrahydrofuran, acetylacetone and dimethyl sulfoxide as solvents for non-aqueous vanadium acetylacetonate redox-flow-batteries
Herr, T.; Noack, J.; Fischer, P.; Tübke, J. | Journal Article |
| 2013 | 7th European Symposium on Non-Lethal Weapons 2013
| Conference Proceedings |
| 2013 | Adjustment of the particle size of ADN-prills generated by the emulsion crystallization process
Heintz, T.; Reinhard, W.; Birke, C.; Leisinger, K. | Conference Paper |
| 2013 | Aging of HTPB/Al/AP rocket propellant formulations investigated by DMA measurements
Cerri, S.; Bohn, M.A.; Menke, K.; Galfetti, L. | Journal Article |
| 2013 | Aluminized ADN/GAP propellants - formulation and properties
Gettwert, V.; Fischer, S.; Menke, K. | Conference Paper |
| 2013 | Analysis of crowd behaviour by various methods of image processing
Schreiber, A.; Sterk, D.; Wassmer, C.; Oberhagemann, D.; Eisenreich, N. | Conference Paper |
| 2013 | Änderung der mechanischen Eigenschaften langfaserverstärkter Thermoplaste beim Fließpressen mit großen Fließwegen
Müller, T.; Hangs, B.; Henning, F. | Conference Paper |
| 2013 | Assessment of dispersion evolution of carbon nanotubes in shear-mixed epoxy suspensions by interfacial polarization measurement
Olowojoba, Ganiu Babatunde | Dissertation |
| 2013 | Atomistic simulation study of intermolecular interactions between binders and plasticizers used in propellants and high explosive charges
Bohn, M.A.; Evangelisti, C.; Klapötke, T.M. | Conference Paper |
| 2013 | Barrieren für das Recycling
Forberger, J.; Wimmer, A.K. | Book Article |
| 2013 | Brandbeständiger Kunststoff-Werkstoff sowie hieraus gebildete Formteile und Brandschutzbeschichtungen
Schaller, Uwe; Gettwert, Volker | Patent |
| 2013 | Cesium based pyrolants combustion properties and emission spectroscopy
Koch, E.-C.; Weiser, V.; Roth, E.; Knapp, S.; Klapötke, T.M.; Scheutzow, S. | Conference Paper |
| 2013 | Characterization of carbon fiber reinforced composites manufactured by high-pressure resin transfer molding process variants
Chaudhari, R.; Karcher, M.; Elsner, P.; Henning, F. | Conference Paper |
| 2013 | Characterization of high-performance composites manufactured by using high-pressure RTM process variants
Chaudhari, R.; Viebahn, F.; Karcher, M.; Elsner, P.; Henning, F. | Conference Paper |
| 2013 | Charakterisierung von Barium/Strontiumtitanatpartikeln mit Hilfe der Röntgenbeugung
Herrmann, M.; Förter-Barth, U.; Rossmann, C. | Conference Paper |
| 2013 | Co-compression molding of tailored continuous-fiber-inserts and inline-compounded long-fiber-thermoplastics
Hangs, B.; Reif, M.; Jauch, R.; Henning, F.; Grauer, D.; Jespersen, S.; Martsman, A. | Conference Paper |
| 2013 | Combustion of Various Metal Particles in Combination with RDX and the Influence of Additional Air
Weiser, V.; Roth, E.; Raab, A.; Kelzenberg, S.; Knapp, S.; Eckl, W. | Conference Paper |
| 2013 | Compounding of MWCNTs with PS in a twin-screw extruder with varying process parameters
Sathyanarayana, S.; Olowojoba, G.; Weiss, P.; Caglar, B.; Pataki, B.; Mikonsaari, I.; Hübner, C.; Henning, F. | Journal Article |
| 2013 | Conducting polymer/SWCNTs modular hybrid materials via Diels-Alder ligation
Yameen, B.; Zydziak, N.; Weidner, S.M.; Bruns, M.; Barner-Kowollik, C. | Journal Article |
| 2013 | Continuous hydrothermal synthesis of in situ functionalized iron oxide nanoparticles
Tercero, M.D. de; Bruns, M.; Martinez, I.G.; Turk, M.; Fehrenbacher, U.; Jennewein, S.; Barner, L. | Journal Article |
| 2013 | Description of consumption of stabilizers in gun propellants showing pseudo-sigmoid decrease
Bohn, M.A. | Conference Paper |
| 2013 | Detection of explosives in sewage water for the localisation of illicit bomb factories in urban areas
Schnürer, F.; Heil, M.; Eberhardt, A.; Krause, H. | Conference Paper |
| 2013 | Development and costs calculation of lithium-sulfur cells with high sulfur load and binder free electrodes
Hagen, M.; Dörfler, S.; Fanz, P.; Berger, T.; Speck, R.; Tübke, J.; Althues, H.; Hoffmann, M.J.; Scherr, C.; Kaskel, S. | Journal Article |
| 2013 | Diels-Alder reactions for carbon material synthesis and surface functionalization
Zydziak, N.; Yameen, B.; Barner-Kowollik, C. | Journal Article |
| 2013 | Directed acoustics for underwater non-lethal weapons
Armbrust, T.; Krebs, H.; Koleczko, A.; Walschburger, E.; Eisenreich, N.; Liehmann, M. | Conference Paper |
| 2013 | Ecodesign in der Luftfahrtindustrie
Wimmer, A.K. | Conference Paper |
| 2013 | The effect of micro-alloying with Zr and Nb on the oxidation behavior of Fe3Al and FeAl alloys
Janda, D.; Fietzek, H.; Galetz, M.; Heilmaier, M. | Journal Article |
| 2013 | Einfluss des Flechtwinkels auf die Werkstoffeigenschaften von tri-axialen Geflechten
Kilchert, S.; Gnädinger, F.; Karcher, M.; Schöpfer, J.; May, M. | Conference Paper |
| 2013 | Einleitung
Woidasky, J.; Ostertag, K.; Stier, C. | Book Article |
| 2013 | Emission spectroscopy of some 4f-metal flames
Roth, E.; Knapp, S.; Raab, A.; Weiser, V.; Koch, E.-C. | Conference Paper |
| 2013 | EMPHASIS - detection and localisation of illicit bomb factories in urban areas
Heil, M.; Schnürer, F.; Krause, H.; Önnerud, H.; Östmark, H. | Conference Paper |
| 2013 | Energetic Materials. Characterization and Modeling of Ignition Process, Reaction Behavior and Performance
| Conference Proceedings |
| 2013 | Energetic reaction of metal carbides - experiments, modelling and application
Weiser, V.; Kelzenberg, S.; Knapp, S.; Lity, A.; Poth, H.; Raab, A.; Roth, E. | Conference Paper |
| 2013 | Enhancing carbon nanotubes dispersion in thermoplastics for the development of multifunctional composites
Sathyanarayana, Shyam Sundar | Dissertation |
| 2013 | Ergebnisse der r²-Begleitforschung: Potenziale von Innovationen in rohstoffintensiven Produktionsprozessen
Ostertag, Katrin; Marscheider-Weidemann, Frank; Paitz, Patrick; Sartorius, Christian; Walz, Rainer; Moller, Björn P.; Seitz, Ralph; Woidasky, Jörg; Stier, Christian; Albrecht, Stefan; Brandstetter, Christian P.; Fröhling, Magnus; Trippe, Frederik; Müller, Josephine; Mayer, Wolfgang A.; Faulstich, Martin | Book Article |
| 2013 | Ermittlung der mechanischen Eigenschaften von CFK-Patch-Strukturen in Abhängigkeit der Patch - Größe und der prozentualen Verteilung
Sauer, Michael
: Wölling, Jakob (Betreuer) | Bachelor Thesis |
| 2013 | Faserverstärkte Thermoplaste in Sandwichbauweise
Roch, Alexander; Menrath, Andreas; Huber, Timo | Journal Article |
| 2013 | Fast and save production of liquid explosives in a continuous pilot plant employing microreaction technology
Tuercke, T.; Mendl, A.; Boskovic, D.; Loebbecke, S. | Conference Paper |
| 2013 | Fiber-reinforced thermoplastics as sandwich construction
Roch, Alexander; Menrath, Andreas; Huber, Timo | Journal Article |
| 2013 | Formulation and production of new energetic materials
Goede, P.; Barbieri, U.; Comte, S.; Quaresma, J.; Dudek, K.; Eck, G.; Fundaro, G.; Keicher, T.; Loken, L.L.; Nevstad, G.O.; Stenmark, H. | Conference Paper |
| 2013 | FOX7/GAP rocket propellants for a shoulder launched projectile
Lips, H.; Menke, K. | Conference Paper |
| 2013 | Fraunhofer Institute for Chemical Technology
Löbbecke, S. | Journal Article |
| 2013 | Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2012/2013
| Annual Report |
| 2013 | GAP test results of formulations based on coated nitramin particles
Gerber, P.; Happ, A.; Heinz, T. | Conference Paper |
| 2013 | Gespritzter Schaum ohne Schlieren
Menrath, A.; Henning, F. | Journal Article |
| 2013 | Glasartige Funktionsschichten durch Plasma-CVD. Teil 2: Vereinfachtes und dauerhaftes Fügen von Leichtbaustrukturen mittels haftfester und korrosionsbeständiger Plasma-CVD-Beschichtungen
Nauenburg, K.D.; Dreher, R.; Stammler, J. | Book Article |
| 2013 | Herstellung von Bauteilen mit lokaler UD-Tape-Verstärkung
Jespersen, S.; Grauer, D.; Hangs, B.; Martsman, A. | Conference Paper |
| 2013 | Herstellung von Nanocellulose durch mechanischen Aufschluss
Köster, A.; Förter-Barth, U.; Herrmann, M.; Schweppe, R.; Teipel, U. | Conference Paper |
| 2013 | Hetero diels-alder chemistry for the functionalization of single-walled carbon nanotubes with cyclopentadienyl end-capped polymer strands
Zydziak, N.; Preuss, C.M.; Winkler, V.; Bruns, M.; Hübner, C.; Barner-Kowollik, C. | Journal Article |
| 2013 | High pressure compression RTM - A new process for manufacturing high volume continuous fiber reinforced composites
Chaudhari, R.; Schmidt, D.; Eisner, P.; Henning, F. | Conference Paper |
| 2013 | High-energy metal fuels for rocket propulsion
Deluca, L.T.; Maggi, F.; Dossi, S.; Weiser, V.; Franzin, A.; Gettwert, Volker; Heintz, Thomas | Journal Article |
| 2013 | High-pressure RTM process variants for manufacturing of carbon fiber reinforced composites
Chaudhari, R.; Rosenberg, P.; Karcher, M.; Schmidhuber, S.; Elsner, P.; Henning, F. | Conference Paper |
| 2013 | Holistic design process for hollow structures based on braided textiles and RTM
Gnädinger, F.; Middendorf, P.; Karcher, M.; Henning, F. | Conference Paper |
| 2013 | In-situ Raman investigation of polysulfide formation in Li-S cells
Hagen, M.; Hammer, M.; Tübke, J.; Schiffels, P.; Dörfler, S.; Althues, H.; Kaskel, S.; Hoffmann, M.J. | Journal Article |
| 2013 | Influence of peroxide addition on the morphology and properties of polypropylene - multiwalled carbon nanotube nanocomposites
Sathyanarayana, S.; Hübner, C.; Diemert, J.; Pötschke, P.; Henning, F. | Journal Article |
| 2013 | Influence of process parameters on the morphology, rheological and dielectric properties of three-roll-milled multiwalled carbon nanotube/epoxy suspensions
Olowojoba, G.; Sathyanarayana, S.; Caglar, B.; Kiss-Pataki, B.; Mikonsaari, I.; Hübner, C.; Elsner, P. | Journal Article |
| 2013 | Inhibitors for non-lethal anti material applications
Bernewitz, J.; Neutz, J.; Hummel, M.; König, A.; Schwegler, P. | Conference Paper |
| 2013 | Innovative Technologien für Ressourceneffizienz in rohstoffintensiven Produktionsprozessen
: Woidasky, Jörg; Ostertag, Katrin; Stier, Christian | Book |
| 2013 | Integration of features into parts made from thermoplastic, unidirectional tape - Overview and case study
Hangs, B.; Esch, C.; Reif, M.; Huber, T.; Henning, F. | Conference Paper |
| 2013 | Introduction
Woidasky, J. | Conference Paper |
| 2013 | Investigation of fixed-position pyrotechnical decoys in realistic air flow with authentic ignition
Deimling, L.; Billeb, G.; Klahn, T.; Schreiber, A.; Zilly, A. | Conference Paper |
| 2013 | LFT-D-Schaum - Leichtbaupotential für strukturelle Komponenten durch langglasfaserverstärkte thermoplastische Schäume
Roch, A.; Henning, F.; Huber, T.; Elsner, P. | Conference Paper |
| 2013 | Light-weight potential of fiber reinforced foams
Roch, A. | Conference Paper |
| 2013 | Lightweight potential of fiber-reinforced foams
Roch, A.; Menrath, A.; Huber, T.; Henning, F.; Elsner, P. | Journal Article |
| 2013 | Linear and nonlinear rheological behavior and crystallization of semicrystalline poly(styrene)-poly(L-lactide) block copolymers
Malek, A.; Dingenouts, N.; Beskers, T.F.; Fehrenbacher, U.; Barner, L.; Wilhelm, M. | Journal Article |
| 2013 | Liquid- and Liquid-Liquid-Phase Reactions - Aromatic Substitution Reactions
Löbbecke, S. | Book Article |
| 2013 | Local continuous fiber-reinforcement - Tailored injection moulding, lightweight potential for injection moulded parts
Huber, T.; Henning, F.; Hangs, B.; Roch, A. | Conference Paper |
| 2013 | Material and Part Characterization of the direct SMC Process for lightweight Class-A Formulations
Henning, F.; Keckl, C.; Kuppinger, J.; Baumgärtner, D. | Conference Paper |
| 2013 | Metal Fluorocarbon Pyrolants XII. Combustion Behaviour of Binary Pyrolants based on MgH2, MgB2, Mg3N2, Mg2Si and Polytetrafluoroethylene
Koch, E.C.; Weiser, V.; Roth, E. | Conference Paper |
| 2013 | Micro-morphological studies of gun propellant materials
Böhnlein-Mauß, J.; Helfrich, M.; Westermayer, H. | Abstract |
| 2013 | Microstructure of NC-propellants investigated by X-ray diffraction (Part 1)
Herrmann, M.; Förter-Barth, U.; Kaiser, M.; Kupzik, K.; Scheibel, R. | Conference Paper |
| 2013 | Microstructure of the PBX KS32 after mechanical loading investigated by x-ray diffraction and DMA
Herrmann, M.; Bohn, M.A.; Krause, H.; Koch, M.; Arnold, W. | Conference Paper |
| 2013 | Microwaves support annealing
Emmerich, R.; Baumann, Sascha | Journal Article |
| 2013 | Mikrowelle unterstützt Tempern
Emmerich, Rudolf; Baumann, Sascha | Journal Article |
| 2013 | Mineralische Materialien
Emmerich, Rudolf; Netzelmann, Udo; Franzen, Christoph; Junk, Uwe; Reichmann, Markus; Laufer, Werner; Kaufmann, Michael | Book Article |
| 2013 | Modelling emission spectra of diatomic molecules for characterization and simulation of pyrotechnic mixtures
Knapp, S.; Eckl, W.; Kelzenberg, S.; Weiser, V. | Conference Paper |
| 2013 | Modelling of the changes in the molar mass distribution function of a polymer caused by random scission of the polymer chains - an update
Eisenreich, N.; Bohn, M.A. | Conference Paper |
| 2013 | Modular ambient temperature functionalization of carbon nanotubes with stimuli-responsive polymer strands
Zydziak, N.; Hübner, C.; Bruns, M.; Vogt, A.P.; Barner-Kowollik, C. | Journal Article |
| 2013 | Molecular Sorting - Technologien für die Kreislaufwirtschaft der Zukunft
Woidasky, Jörg M. | Presentation |
| 2013 | Multi-material design - Lightweight design for electric vehicles
Reif, M.; Luke, M.; Henning, F.; Müller, T.; Paul, H.; Fliegener, S. | Conference Paper |
| 2013 | Multifunktionale MW-Plasma-CVD-Beschichtungen für das direkte und beständige Fügen von hochfesten Aluminium-CFK-Leichtbaustrukturen
Nauenburg, K.D. | Conference Paper |
| 2013 | Multiwalled carbon nanotubes incorporated into a miscible blend of poly(phenylenether)/polystyrene - processing and characterization
Sathyanarayana, S.; Wegrzyn, M.; Olowojoba, G.; Benedito, A.; Giménez, E.; Hübner, C.; Henning, F. | Journal Article |
| 2013 | Nanosilver system technology for applications in nanomedicine
Schmid, Helmut | Book Article |
| 2013 | New approach for simple temperature measurements of metal combustion
Knapp, S.; Bieroth, D.; Kelzenberg, S.; Raab, A.; Weiser, V.; Eckl, W. | Conference Paper |
| 2013 | A numerical analysis of an innovative Joining Technique for Composite Structures
Lang, H.; Nogueira, A.C.; Hombergsmeier, E.; Drechsler, K. | Conference Paper |
| 2013 | On-line monitoring of molecular weight using NIR spectroscopy in reactive extrusion process
Bergmann, B.; Becker, W.; Diemert, J.; Elsner, P. | Journal Article |
| 2013 | Pair distribution function of ammonium nitrate - a comparison of measuring systems
Kempa, P.B.; Herrmann, M. | Conference Paper |
| 2013 | Palladium-based bimetallic catalysts for alkaline direct alcohol fuel cell (ADAFC)
Jurzinsky, T.; Cremers, C.; Pinkwart, K.; Tübke, J. | Conference Paper |
| 2013 | Particulate matter. EFCA views on possible metrics and the "one atmosphere" approach
Reichert, T.; Harn, J. van | Conference Paper |
| 2013 | Polarization-sensitive optical coherence tomography for characterization of size and shape of nano-particles
Schneider, S.; Krämer, A.; Eppler, F.; Alemye, H.; Hübner, C.; Mikonsaari, I.; Leuthold, J.; Freude, W.; Koos, C. | Conference Paper |
| 2013 | Polyurethane base sandwich structures - Face sheet characteristics
Kuppinger, J.; Kopp, G.; Dietrich, S.; Henning, F. | Conference Paper |
| 2013 | Preparation and characterization of poly(vinylidene fluoride) based composite electrolytes for electrochemical devices
Karabelli, D.; Lepretre, J.-C.; Cointeaux, L.; Sanchez, J.-Y. | Journal Article |
| 2013 | Process, material and part characterization of the innovative direct SMC process
Potyra, T.; Henning, F.; Graf, M.; Reuther, E. | Conference Paper |
| 2013 | Production of ultrafine explosive particles in non-aqueous systems by bead milling technology
Roßmann, C.; Heintz, T.; Herrmann, M.; Förter-Barth, U. | Conference Paper |
| 2013 | Produktgestaltung in der Partikeltechnologie. Bd.6
: Teipel, Ulrich; Weber, Alfred | Conference Proceedings |
| 2013 | Quaternary diamond-like chalcogenidometalate networks as efficient anode material in lithium-ion batteries
Kaib, T.; Haddadpour, S.; Andersen, H.F.; Mayrhofer, L.; Järvi, T.T.; Moseler, M.; Möller, K.-C.; Dehnen, S. | Journal Article |
| 2013 | Raman spectroscopy for the detection of explosives and their precursors on clothing in fingerprint concentration: A reliable technique for security and counterterrorism issues
Almaviva, S.; Botti, S.; Cantarini, L.; Palucci, A.; Puiu, A.; Schnuerer, F.; Schweikert, W.; Romolo, F.S. | Conference Paper |
| 2013 | Raman-spectroscopy to analyse pyrotechnic components and residues
Becker, W.; Weiser, V.; Bendfeld, A. | Abstract |
| 2013 | Reaktive Extrusion und Echtzeitanalytik. Strategien auf dem Weg zum gläsernen Extruder
Bergmann, B.; Becker, W.; Diemert, J. | Journal Article |
| 2013 | Realisierung und Potential von Hohlstrukturbauteilen mit Hinterschnitt im RTM-Verfahren für die automobile Großserie
Gnädinger, F.; Middendorf, P.; Karcher, M.; Chaudhari, R.; Henning, F. | Conference Paper |
| 2013 | Recycling von PET-Flaschen und Verpackungsmaterialien im Food-Contact-Bereich
Wimmer, A.K.; Woidasky, J.; Forberger, J. | Book Article |
| 2013 | Rheological, dielectric and morphological Properties of three-roll-milled multiwalled Carbon Nanotube / Epoxy Suspensions: Influence of Processing Parameters
Olowojoba, G.; Sathyanarayana, S.; Caglar, B.; Mikonsaari, I.; Hübner, C.; Elsner, P. | Conference Paper |
| 2013 | Saechtling Kunststoff Taschenbuch. 31. Auflage
: Baur, E.; Brinkmann, S.; Osswald, T.; Rudolph, N.; Schmachtenberg, E. | Book |
| 2013 | Scale up of the polymerization of copolymer ECH/BBrMO as precursor for an energetic polymer
Keicher, T.; Steinert, S.; Dörich, M.; Krause, H.; Raab, M.; Schaller, U.; Schweikert, W.; Kaiser, M. | Conference Paper |
| 2013 | Seeking the RS-PBXs allowing for higher performance of inertial confinement: EDA research and technology project "RSEM"
Plaksin, I.; Mendes, R.; Rodrigues, L.; Almada, S.; Herrmann, M.; Heintz, T.; Borne, L.; Kaiser, M.; Bancallari, L.; Barbieri, U.; Tempra, M. | Conference Paper |
| 2013 | Sulfur cathodes with carbon current collector for Li-S cells
Hagen, M.; Feisthammel, G.; Fanz, P.; Grossmann, H.T.; Dörfler, S.; Tübke, J.; Hoffmann, M.J.; Börner, D.; Joos, M.; Althues, H.; Kaskel, S. | Journal Article |
| 2013 | Synthese und Eigenschaften von teilkristallinen Polystyrol-Poly-L-lactid Blockcopolymeren
Malek, Alicia
: Elsner, Peter | Dissertation |
| 2013 | Synthesis of in situ functionalized iron oxide nanoparticles presenting alkyne groups via a continuous process using near-critical and supercritical water
Daschner de Tercero, M.; Gonzáles Martínez, I.; Herrmann, M.; Bruns, M.; Kübel, C.; Jennewein, S.; Fehrenbacher, U.; Barner, L.; Türk, M. | Journal Article |
| 2013 | Synthesis of polymers with phosphorus containing side chains via modular conjugation
Eisenblaetter, J.; Bruns, M.; Fehrenbacher, U.; Barner, L.; Barner-Kowollik, C. | Journal Article |
| 2013 | Thermal decomposition of nitromethane in the presence of carbon nanotubes
Schaller, U.; Weiser, V.; Hürttlen, J.; Keicher, T.; Krause, H. | Conference Paper |
| 2013 | Thermally stable materials for caseless ammunition
Böhnlein-Mauß, J.; Pontius, H. | Abstract |
| 2013 | A thermoanalytical study on the reaction of ZrC in air
Dippold, I.; Kuchenreuther, V.; Eisenreich, N.; Neutz, J.; Schuppler, H. | Conference Paper |
| 2013 | Thermoplastic Unidirectional Tapes - A case study for large Volume Application
Reif, M.; Grauer, D.; Almond, B.; Hangs, B.; Martsman, A.; Jespersen, S. | Conference Paper |
| 2013 | Trace detection of oxygen - ionic liquids in gas sensor design
Baltes, N.; Beyle, F.; Freiner, S.; Geier, F.; Joos, M.; Pinkwart, K.; Rabenecker, P. | Journal Article |
| 2013 | Tracking of the curing of binders for composite rocket propellants by heat flow microcalorimetry and pressure-temperature sensors
Mußbach, Günter; Bohn, M.A. | Conference Paper |
| 2013 | Ultrafine particles. Some views on preferred metrics
Reichert, T.; Ham, J. van | Conference Paper |
| 2013 | Untersuchung von binderfreien Schwefelkathoden als Hochenergiespeicher der nächsten Generation
Hagen, Markus | Dissertation |
| 2013 | Untersuchungen zur Erzeugung kalter Reaktionsgase auf Basis pyrotechnischer Kaltgasgeneratoren
Neutz, Jochen | Dissertation |
| 2013 | Use of a hot-spot model to describe the influence of particle size and distance on combustion in a cloud
Kelzenberg, S.; Knapp, S.; Weiser, V.; Eisenreich, N. | Journal Article |
| 2013 | Using unidirectional glass tapes to improve impact performance of thermoplastic composites in automotive applications
Emerson, D.; Grauer, D.; Hangs, B.; Reif, M.; Henning, F.; Martsman, A.; Tage, S. | Conference Paper |
| 2013 | Water ad- and desorption kinetics in zeolites for numericla simulations of thermo-chemical energy storages
Günthner, Christian; Eckl, Wilhelm; Eisenreich, Norbert; Neutz, Jochen; Pappert, Sandra | Abstract |
| 2013 | Weiterentwicklung des Recyclings von faserverstärkten Verbunden
Woidasky, J. | Book Article |
| 2013 | Zerstörungsfreie elektrische Ladungstrennung und elektrische Effekte während der Gerinnung von Blut zur Detektion von Blutgerinnseln im Umfeld von metallischen Implantaten
Bender, Angelika Dorothea
: Eyerer, Peter (Prüfer); Hirth, Thomas (Prüfer) | Dissertation |
| 2012 | 2,4,6-trinitrotoluene: A surprisingly insensitive energetic fuel and binder in melt-cast decoy flare compositions
Koch, E.C.; Weiser, V.; Roth, E. | Journal Article |
| 2012 | 2,4,6-Trinitrotoluol ist ein unempfindlicher, energiereicher Brennstoff und Binder für schmelzgießbare Täuschkörperformulierungen
Koch, E.-C.; Weiser, V.; Roth, E. | Journal Article |
| 2012 | 2-Nitro and 4-Nitro-N-nitroso-N-ethylaniline
Evangelisti, C.; Klapötke, T.M.; Karaghiosoff, K.; Bohn, M.A. | Conference Paper |
| 2012 | Advanced stabilization of ADN-prills by preparation of raw materials by means of fluidized bed technology
Heintz, T.; Leisinger, K.; Bohn, M.A. | Conference Paper |
| 2012 | Aging and thermal behavior of a PVA/Al microspheres slurry for aluminizing purposes
Rannou, B.; Velasco, F.; Guzmán, S.; Kolarik, V.; Pedraza, F. | Journal Article |
| 2012 | Airbag 2012. 11th International Symposium and Exhibition on Sophisticated Car Occupant Safety Systems
: Neutz, Jochen (Hrsg.) | Conference Proceedings |
| 2012 | Analysis of the static and fatigue strength of a damage tolerant 3D-reinforced joining technology on composite single lap joints
Nogueira, A.C.; Drechsler, K.; Hombergsmeier, E. | Conference Paper |
| 2012 | Analysis of the static and fatigue strength of a damage tolerant 3D-reinforced joining technology on composite single lap joints
Nogueira, A.C.; Drechsler, K.; Hombergsmeier, E. | Conference Paper |
| 2012 | Assessing the ageing-state of solid propellant grains in case-bonded rocket motors by measuring bondline stresses
Mußbach, G.; Tussiwand, G.; Buswell, J. | Conference Paper |
| 2012 | Aufbereitung von sekundären Baurohstoffen durch Agglomeration
Schindhelm, S.; Schnell, A.; Hennig, M.; Schwieger, B.; Müller, A.; Teipel, U. | Journal Article |
| 2012 | Aufbereitungstechnik. Aktuelle verfahrenstechnische Fragestellungen für die Aufbereitung von mineralischen, nachwachsenden und sekundären Rohstoffen
Peuker, U.; Kwade, A.; Teipel, U.; Jäckel, H.-G.; Mütze, T. | Report |
| 2012 | Automatisierungsbasis Spritzgießtechnik
Berg, L-F. | Journal Article |
| 2012 | Beschleunigtes Vernetzen von Silikonen zur Flüssigabdichtung von Ölwannen aus Kunststoff in der Serienproduktion von Verbrennungsmotoren
Preuß, Michael
: Elsner, Peter | Dissertation |
| 2012 | Bestimmung der spezifischen Oberfläche von Pulvern
Winter, H.; Teipel, U. | Journal Article |
| 2012 | Boosting impact strength of thermoplastic semistructural composites via unidirectional tapebased fabrics and tailored laminates
Ruby, M.; Grauer, D.; Hangs, B.; Reif, M.; Henning, F.; Martsman, A.; Jespersen, S.T. | Conference Paper |
| 2012 | Characterisation of high explosive formulations based on fox-12
Gerber, Peter; Keßler, Armin; Kretschmer, Alois; Fischer, Thomas | Conference Paper |
| 2012 | Characterization of high-pressure RTM processes for manufacturing of high performance composites
Chaudhari, R.; Karcher, M.; Elsner, P.; Henning, F. | Conference Paper |
| 2012 | Charakterisierung der Eindickung von Sheet Moulding Compounds
Tieben, Sandra
: Krumpholz, Thorsten (Prüfer); Keckl, Christoph (Prüfer) | Bachelor Thesis |
| 2012 | Chemical-Stitching, ein vielversprechender Ansatz für die automatisierte Preform-Fertigung
Thoma, B.; Weidenmann, K.A.; Henning, F. | Journal Article |
| 2012 | Cluster MicroTEC Südwest, Verbundprojekt MicroDidact
Krause, D.; Baborie, S.; Eyerer, P. | Book Article |
| 2012 | Combustion behaviour of gelled nitromethane propellants filled with metallic particles and hybrides
Weiser, V.; Hürttlen, J.; Kelzenberg, S.; Lity, A.; Roth, E.; Schaller, U. | Conference Paper |
| 2012 | Combustion of pyro-organic flares including thermites
Weiser, Volker; Raab, Angelika; Lity, André | Conference Paper |
| 2012 | Combustion of ytterbium metal
Weiser, Volker; Roth, Evelin; Knapp, Sebastian; Kelzenberg, Stefan | Journal Article |
| 2012 | Compatibility and simulation of the heating up of the propellant charge body of a high precision machine gun
Bohn, Manfred A.; Pfersmann, Axel | Conference Paper |
| 2012 | Compounding extrusion of polypropylene carbon nanotube composites: Optimising and economizing process with a commercial perspective - A case study
Zamora, D.B.; Sathyanarayana, S.; Weiss, P.; Hübner, C.; Diemert, J.; Henning, F.; Eisner, P. | Conference Paper |
| 2012 | Computer (micro)-tomography: A powerful tool to characterise and analyse internal structures non-destructively
Kröber, Hartmut | Conference Paper |
| 2012 | Continuous fiber reinforced structural components: Combining polymerization and molding within a single machine
Bäck, G.; Egger, P.; Berg, L.F. | Journal Article |
| 2012 | Continuous flow synthesis of DNDA57 in a capillary microreactor
Antes, Jürgen; Janitschek, Wieland; Schulz, Norbert; Löbbecke, Stefan | Conference Paper |
| 2012 | A convenient synthesis for 3,3-Bis(bromoethyl)oxetane
Keicher, T.; Kawamoto, A.M.; Krause, H.; Schaller, U.; Steinert, S. | Conference Paper |
| 2012 | Corrosion studies on electro polished stainless steels for the use as metallic bipolar plates in PEMFC applications
Richards, J.; Cremers, C.; Fischer, P.; Schmidt, K. | Conference Paper, Journal Article |
| 2012 | Detection of Explosives based on the Work Function Read-out of Molecularly Imprinted Polymers
Pohle, R.; Jeanty, P.; Stegmeier, S.; Hürttlen, J.; Fleischer, M. | Journal Article, Conference Paper |
| 2012 | Determination of the nanoparticle size distribution in media by turbidimetric measurements
Guschin, V.; Becker, W.; Eisenreich, N.; Bendfeld, A. | Journal Article |
| 2012 | Determination of the thermal properties heat conductivity, thermal diffusivity and specific heat by the HotDiskTM instrument
Pontius, Heike; Bohn, Manfred A. | Conference Paper |
| 2012 | Development and optimization of an innovative joining technique for composite structures using the Finite Element method
Lang, H.; Nogueira, A.C.; Drechsler, K.; Hombergsmeier, E. | Conference Paper |
| 2012 | Development of carbon nanotube based bipolar plates for vanadium redox flow batteries
Caglar, B.; Sathyanarayana, S.; Olowojoba, G.; Fischer, P.; Huebner, C.; Elsner, P. | Conference Paper |
| 2012 | Differential electrochemical mass spectrometry (DEMS) technique for direct alcohol fuel cell characterization
Cremers, C.; Bayer, D. | Book Article |
| 2012 | Dispergiereigenschaften nicht-modifizierter und funktionalisierter Carbon Nanotubes
Dresel, A.; Teipel, U. | Journal Article |
| 2012 | Eigenschaften von Prüfstäuben und ihre Anwendung in der Filterprüftechnik
Teipel, Ulrich; Eichler, A.L.; Cäsar, Joachim | Conference Paper |
| 2012 | Elektrochemischer Energiespeicher- oder Energiewandlervorrichtung aus einer galvanischen Zelle mit elektrochemischen Halbzellen umfassend eine Suspension aus Fulleren und ionischer Flüssigkeit
Noack, Jens; Tübke, Jens; Pinkwart, K. | Patent |
| 2012 | Emissionsprüfungen an Kunststoffen - Analyseverfahren und Anwendungsmöglichkeiten
Tübke, Beatrice; Bison, René | Conference Paper |
| 2012 | Energetic materials. Synthesis, characterization, processing
: Hürttlen, J. | Conference Proceedings |
| 2012 | Entwicklungsstudie zur Errichtung einer CFK-Recyclinganlage in Bayern. Abschlussbericht
Kümmeth, Michael; Gottlieb, Anita; Ramerth, Juliane; Seitz, Matthias; Hartleitner, Bernhard; Rommel, Wolfgang; Danko, Achim; Wölling, Jakob | Report |
| 2012 | Erweitertes Einsatzspektrum von Aufbereitungsextrudern durch neue Prozesstechniken - Mikrowellen, Überkritische Fluide, Ultraschall
Diemert, J.; Just, D.; Weiss, P. | Book Article |
| 2012 | Evaluation of mechnical properties of glycidyl azide polymer (GAP) cured with isocyanate and bispropargyl succinate (BPS)
Keicher, Thomas; Aniol, Jasmin; Krause, Horst; Kronis-Rudigier, Gunnar; Schuppler, Heike; Steinert, Sarah | Conference Paper |
| 2012 | Experimental investigation of polystyrene-multi wall carbon nanotubes (PS-MWCNT) interaction
Sathyanarayana, Shyam; Hübner, Christof; Henning, Frank | Conference Paper |
| 2012 | Factors influencing the formation of a diffusion zone and the adherence of the top coat of high temperature coatings from micro-sized spherical aluminium particles
Kolarik, V.; Roussel, R.; Lorenzo, M.J.; Fietzek, H. | Journal Article |
| 2012 | Flame retardancy working mechanism of methyl-DOPO and MPPP in flexible polyurethane foam
König, A.; Kroke, E. | Journal Article |
| 2012 | Foamed propellants as caseless ammunition
Böhnlein-Mauß, Jutta; Kröber, Hartmut; Scheidt, B. | Conference Paper |
| 2012 | Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2011/2012
| Annual Report |
| 2012 | A free-standing aligned-carbon-nanotube/nanocomposite foil as an efficient counter electrode for dye solar cells
Malara, F.; Manca, M.; Lanza, M.; Hubner, C.; Piperopoulos, E.; Gigli, G. | Journal Article |
| 2012 | Funktionalisierung thermoplastischer UD-Tapegelege im Spritzgießverfahren - Untersuchung der Grenzflächenfestigkeit in Abhängigkeit der Prozessparameter
Henning, F.; Hangs, B.; Reif, M. | Conference Paper |
| 2012 | Gas generator fuel composition on the basis of guanyl urea dinitramide, useful e.g. for hydraulic systems, comprises fuel- and/or explosive material and additional fuel- and/or explosive material, polymer binder, and combustion modifier
Menke, K.; Eisele, S. | Patent |
| 2012 | Gelled flares based on ionic liquids
Schaller, Uwe; Weiser, Volker; Keicher, Thomas; Krause, Horst | Conference Paper |
| 2012 | Generic fomulation of performance assessment quantities for stability, compatibility and ageing of energetic materials
Bohn, Manfred A. | Conference Paper |
| 2012 | Heterogen katalysierte Herstellung von Furfural aus Xylose
Forstner, J.; Unkelbach, G.; Pindel, E.; Schweppe, R. | Journal Article |
| 2012 | High capacity vertical aligned carbon nanotube/sulfur composite cathodes for lithium-sulfur batteries
Dörfler, S.; Hagen, M.; Althues, H.; Tübke, J.; Kaskel, S.; Hoffmann, M.J. | Journal Article |
| 2012 | High-rate MW-PCVD processes for transparent hard coatings on PC. Progress in the up scaling to large area applications
Nauenburg, K.-D.; Dreher, R.; Blaich, H.; Schmitt, C. | Conference Paper |
| 2012 | Hydrothermale Erhärtung - Ein Lösungsweg für die Steigerung der Ressourcenproduktivität von feinkörnigem mineralischen Bauabfall
Forberger, J.; Hartmann, A.; Müller, A.; Woidasky, J. | Journal Article |
| 2012 | Hydrothermale Herstellung von Nanopartikeln mit clickfägigen Linkern an der Oberfläche
Daschner de Tercero, M.; Jennewein, S.; Fehrenbacher, U.; Barner, L. | Patent |
| 2012 | Improving impact performance in D-LFT composites with UD-glass tapes
Grauer, D.; Hangs, B.; Reif, M.; Henning, F.; Martsman, A.; Jespersen, S.T. | Journal Article |
| 2012 | Improving mechanical performance of automotive underbody shield with unidirectional tapes in compression-molded direct-long fiber thermoplastics (D-LFT)
Grauer, D.; Hangs, B.; Reif, M.; Martsman, A.; Jespersen, S.T. | Journal Article |
| 2012 | Influence of compounding parameters on the Electrical properties of polystyrene-carbon nanotube nanocomposites
Sathyanarayana, S.; Olowojoba, G.; Weiss, P.; Hübner, C.; Henning, F. | Conference Paper |
| 2012 | Influences on the loss factor of elastomer binders and its modelling
Bohn, Manfred A.; Mußbach, Günter; Cerri, Sara | Conference Paper |
| 2012 | Inline monitoring of microreaction processes by pushbroom imaging spectroscopy
Panic, S.; Boskovic, D.; Loebbecke, S. | Conference Paper |
| 2012 | Investigation of nc-based gun propellants by means of x-ray diffraction
Herrmann, Michael; Förter-Barth, Ulrich; Böhnlein-Mauß, Jutta; Bohn, Manfred A. | Conference Paper |
| 2012 | Investigations of the anodic oxidation of ethanol under forced convection and ambient conditions
Meier, J.O.; Cremers, C.; Stimming, U.; Tübke, J. | Conference Paper |
| 2012 | Ionenleitender Festkörperseparator
Berger, Thomas; Hagen, Markus | Patent |
| 2012 | Isostatic pressing of gun propellant mictures
Böhnlein-Mauß, J.; Kröber, H.; Scheidt, B. | Conference Paper |
| 2012 | Kathodeneinheit für Alkalimetall-Schwefel-Batterie mit optimierter Ableiterstruktur
Hagen, Markus; Althues, Holger; Dörfler, Susanne; Kaskel, Stefan; Berger, Thomas | Patent |
| 2012 | Keramisches Wärmedämmschichtsystem mit äußerer aluminiumreicher Schicht und Verfahren
Stamm, Werner; Kolarik, Vladislav | Patent |
| 2012 | Kilogram-scale production of energetic materials in a remote-controlled microreactor plant
Türcke, Tobias; Mendl, A.; Boskovic, D.; Antes, Jürgen; Löbbecke, Stefan | Conference Paper |
| 2012 | Kinetic rules. Arrhenius contra vant' Hoff
Krause, Horst | Conference Paper |
| 2012 | Kontinuierliches und reproduzierbares Auftragen von geschnittenen Natur-Langfasern zur Herstellung von Sheet Moulding Compounds
Bücheler, David
: Henning, Frank (Betreuer); Keckl, Christoph (Betreuer) | Thesis |
| 2012 | Kunststoffe. Eigenschaften und Anwendungen. 8., neu bearb. und erw. Aufl.
Domininghaus, Hans
: Elsner, Peter (Hrsg.); Eyerer, Peter (Hrsg.); Hirth, Thomas (Hrsg.) | Book |
| 2012 | Laserbasierte Ferndetektion von Explosivstoffen
Fuchs, F.; Hugger, S.; Yang, Q.K.; Kinzer, M.; Bronner, W.; Loesch, R.; Aidam, R.; Wagner, J.; Degreif, K.; Rademacher, S.; Schnürer, F.; Schweikert, W. | Conference Paper |
| 2012 | Lithium-sulphur batteries - binder free carbon nanotubes electrode examined with various electrolytes
Hagen, M.; Dörfler, S.; Althues, H.; Tübke, J.; Hoffmann, M.J.; Kaskel, S.; Pinkwart, K. | Journal Article |
| 2012 | Luftatmende Brennstoffzelle und Zellstapel für die Oxidation von Ionen mit Sauerstoff
Noack, J.; Berger, T.; Tübke, J.; Pinkwart, K. | Patent |
| 2012 | Material- und Prozessvalidierung zur Herstellung faserverstärkter Polyurethane als Konstruktionswerkstoff im Fasersprühverfahren
Kuppinger, Jan | Dissertation |
| 2012 | Metal-fluorocarbon pyrolants. XIII: High performance infrared decoy flare compositions based on MgB2 and Mg2Si and Polytetrafluoroethylene/Viton®
Koch, E.C.; Hahma, A.; Weiser, V.; Roth, E.; Knapp, S. | Journal Article |
| 2012 | Metal-Fluorocarbon Pyrolants. XV: Combustion of two Ytterbium-Halocarbon Formulations
Koch, E.-C.; Weiser, V.; Roth, E.; Knapp, S.; Lingen, J. van; Moorhoff, J. | Journal Article |
| 2012 | Methods to investigate the igniter/propellant interaction
Weiser, Volker; Kelzenberg, Stefan; Knapp, Sebastian; Roth, Evelin | Conference Paper |
| 2012 | Microstructure of the plastic bonded explosive KS32
Herrmann, M.; Kempa, P.B.; Förter-Barth, U.; Arnold, W. | Conference Paper |
| 2012 | Microwave curing of long fiber reinforced composites in an open antenna system
Díaz, E.; Emmerich, R.; Graf, M.; Ress, C.; Roig, I.; Chamudis, L. | Conference Paper |
| 2012 | Mikroverkapselung von Aluminiumpartikeln in einer Hochdruckwirbelschicht
Kröber, H.; Prinner, M.; Klinger, A.; Neutz, J.; Teipel, U. | Conference Paper, Journal Article |
| 2012 | Modeling the influence of concentration on the burning behavior of granular pyrotechnic compositions
Knapp, S.; Weiser, V.; Kelzenberg, S.; Eisenreich, N. | Conference Paper |
| 2012 | Modelling delamination of Ti-CFRP interfaces
Savani, E.; Pirondi, A.; Carta, F.; Nogueira, A.C.; Hombergsmeier, E. | Conference Paper |
| 2012 | Molecular mechanic simulation of the crystal structures of hmx and cl-20 using the force field compass - a comparison with measured data
Kempa, Paul-Bernd; Herrmann, Michael | Conference Paper |
| 2012 | Molecular Sorting Technologies
Woidasky, J. | Conference Paper |
| 2012 | Molecular Sorting. Szenarien für die Welt von Übermorgen
Seitz, Ralph; Moller, Björn P.; Dönitz, Ewa; Berner, Simon; Woidasky, Jörg | Report |
| 2012 | Monitoring of the curing reaction of composite rocket propellants by pressure measurements in closed vessels
Bohn, Manfred A.; Mußbach, Günter; Tussiwand, Giuseppe | Conference Paper |
| 2012 | Multifunctional hybrid foams
Rapp, Florian; Diemert, Jan | Journal Article |
| 2012 | Multifunktionale Hybridschäume
Rapp, Florian; Diemert, Jan | Journal Article |
| 2012 | Natürliche Dämmstoffe
Kauffmann, A.; Bader, B.; Elsner, P. | Book Article |
| 2012 | Naturwissenschaftlicher Unterricht in der TheoPrax-Methodik erhöht die Lerneffektivität
Krause, D.; Eyerer, P. | Journal Article |
| 2012 | A new approach for modeling pyrotechnic particle reactions using hot-spot calculations
Knapp, Sebastian; Kelzenberg, Stefan; Weiser, Volker; Eisenreich, Norbert | Conference Paper |
| 2012 | Non-destructive characterization of ingredients in PBX using x-ray diffraction
Herrmann, Michael; Kempa, Paul-Bernd; Förter-Barth, Ulrich | Conference Paper |
| 2012 | Numerische Simulation von Materialalterung: Das VipQuali-Simulationstool
Müller, A.; Vatahska, T.; Geburtig, A.; Reichert, Thomas | Conference Paper |
| 2012 | On the influence of a heat treatment for an aluminizing process based on Al microparticles slurry for model Ni and Ni20Cr. Experimental and theoretical approaches
Rannou, B.; Mollard, M.; Bouchaud, B.; Balmain, J.; Bonnet, G.; Kolarik, V.; Pedraza, F. | Conference Paper |
| 2012 | Online raman spectroscopy observations during melt mixing of multiwalled carbon nanotubes with polystyrene to form composites
Sathyanarayana, S.; Bendfeld, A.; Hübner, C.; Henning, F. | Conference Paper |
| 2012 | Online-Messmethode zur Charakterisierung von Nanokompositen
Guschin, V.; Becker, W.; Eisenreich, N.; Bendfeld, A. | Conference Paper, Journal Article |
| 2012 | Orthogonal ligation to spherical polymeric microparticles: Modular approaches for surface tailoring
Goldmann, A.S.; Barner, L.; Kaupp, M.; Vogt, A.P.; Barner-Kowollik, C. | Journal Article |
| 2012 | Oxidation of nickel-based alloys in dry and water vapour containing air
Juez-Lorenzo, M.; Kolarik, V.; Stamm, W.; Fietzek, H. | Journal Article |
| 2012 | Photo-induced macromolecular functionalization of cellulose via nitroxide spin trapping
Delaittre, G.; Dietrich, M.; Blinco, J.P.; Hirschbiel, A.; Bruns, M.; Barner, L.; Barner-Kowollik, C. | Journal Article |
| 2012 | Photoclickable surfaces for profluorescent covalent polymer coatings
Dietrich, M.; Delaittre, G.; Blinco, J.P.; Inglis, A.J.; Bruns, M.; Barner-Kowollik, C. | Journal Article |
| 2012 | Polyurethan-basierende Sandwichstrukturen. Deckschichtcharakterisierung und Bauteilentwicklung
Kuppinger, J.; Henning, F.; Krämer, U. | Conference Paper |
| 2012 | Preparation and properties of energetic thermoplastic elastomers (ETPE) from GAP and Poly-BAMO
Keicher, T.; Dörich, M.; Förter-Barth, U.; Grünfelder, C.; Steinert, S.; Schaller, U.; Krause, H. | Conference Paper |
| 2012 | Process monitoring by curing thermoset materials
Becker, Wolfgang; Bendfeld, Anja; Eisenreich, Norbert; Geißler, Egon; Klemenz, Melanie | Conference Paper |
| 2012 | Production of ultrafine explosive particles by bead milling technology
Roßmann, C.; Heintz, T.; Herrmann, M. | Conference Paper |
| 2012 | Produktgestaltung in der Partikeltechnologie
Teipel, U. | Conference Paper, Journal Article |
| 2012 | Produktqualifikation - Spannungsfeld in der Prüftechnik
Cäsar, J.; Teipel, U. | Conference Paper |
| 2012 | Produktqualifikation - Wirkungen auf Produkte
: Teipel, U. | Conference Proceedings |
| 2012 | Projektthemen für den Unterricht
Eyerer, Peter; Krause, Dörthe | Book |
| 2012 | PURtrain - Hybride. Sandwichbauweisen für Schienenfahrzeuge
Kuppinger, Jan | Journal Article |
| 2012 | Pyrotechnic cold gas generators for underwater rescue systems and heavy duty lifting
Menke, Klaus; Ebeling, Hans; Neutz, Jochen; Schleicher, Ulrich; Eigenmann, Bernd | Conference Paper |
| 2012 | Reinforced particle foams
Rapp, F.; Kauffmann, A.; Diemert, J.; Henning, F. | Conference Paper |
| 2012 | Ressourceneffizienter Leichtbau für die Großserie
Roch, A.; Huber, T.; Reif, M.; Hangs, B. | Journal Article |
| 2012 | Ressourceneffizienz von heute bis übermorgen
Woidasky, J.; Hirth, T. | Journal Article |
| 2012 | Ressourceneffizienzpotenziale von Innovationen in rohstoffnahen Produktionsprozessen
Albrecht, Stefan; Bollhöfer, Esther; Brandstetter, Christian Peter; Fröhling, Magnus; Mattes, Katharina; Ostertag, Katrin; Peuckert, Jan; Seitz, Ralph; Trippe, Frederik; Woidasky, Jörg | Journal Article |
| 2012 | Rheologische und (di)elektrische Messungen an polymeren und an kristallinen Systemen
Bender, Angelika; Förter-Barth, Ulrich; Eyerer, Peter | Conference Paper |
| 2012 | Rohrförmige Crashkörper aus UD-endlosfaserverstärkten Thermoplasten. Tl.A: Prüfkörpererstellung basierend auf neuartigem Tapelegeverfahren
Hangs, B.; Henning, F.; Burkhart, A.; Cramer, D.R.; Jespersen, S.T. | Journal Article |
| 2012 | Sensor concepts for the detection of explosives with selective layers based on molecularly imprinted polymers
Hürttlen, J.; Bunte, G.; Röseling, D.; Heil, M.; Krause, H. | Conference Paper |
| 2012 | Der Spritzgießer kann auch Leichtbau
Roch, Alexander; Huber, Timo | Journal Article |
| 2012 | Standoff detection of explosives and high sensitive detection of chemicals in drinking water with quantum cascade lasers
Fuchs, F.; Hugger, S.; Yang, Q.K.; Kinzer, M.; Bronner, W.; Lösch, R.; Aidam, R.; Degreif, K.; Rademacher, S.; Konz, W.; Schnürer, F.; Schweikert, W. | Conference Paper |
| 2012 | Standoff detection of explosives with broad band tunable external cavity quantum cascade lasers
Fuchs, F.; Hugger, S.; Kinzer, M.; Yang, Q.K.; Bronner, W.; Aidam, R.; Degreif, K.; Rademacher, S.; Schnürer, F.; Schweikert, W. | Conference Paper |
| 2012 | Staubprüfung und Prüfstäube - eine Einschätzung
Teipel, Ulrich; Cäsar, Joachim | Conference Paper |
| 2012 | Strukturaufklärung und Messung optischer und mechanischer Eigenschaften funktioneller und kratzfester Plasma-CVDSchichten, hergestellt mittels eines Mikrowellen-Hochrate-Abscheideverfahrens aus TMDSO/O2 -Gemischen
Nauenburg, K.-D.; Präfke, C.; Dreher, R.; Schulz, U. | Conference Paper |
| 2012 | Superior infrared flare compositions based on magnesium diboride (MgB2) and dimagnesium silicide (Mg2Si) / polytetrafluoroethylene / viton tm infrared decoy flares
Koch, Ernst-Christian; Hahma, Arno; Weiser, Volker; Roth, Evelin; Knapp, Sebastian | Conference Paper |
| 2012 | TATP stand-off detection with open path: FTIR techniques
Fischer, C.; Pohl, T.; Weber, K.; Vogel, A.; Haren, G. van; Schweikert, W. | Conference Paper |
| 2012 | Textiler Leichtbau in Luft- und Raumfahrt und Automobilbau - Automatisierte Composite Technologie
Drechsler, Klaus | Presentation |
| 2012 | Thermal behaviour of energetic materials in adiabatic selfheating determined by ARCtm
Bohn, Manfred A.; Pontius, Heike | Conference Paper |
| 2012 | Time resolved UV/Vis-spectroscopy on thermite reactions
Knapp, Sebastian; Weiser, Volker; Eckl, Wilhelm | Conference Paper |
| 2012 | Twin-screw extrusion of multi walled carbon nanotubes reinforced polycarbonate composites: Investigation of electrical and mechanical properties
Mack, C.; Sathyanarayana, S.; Weiss, P.; Mikonsaari, I.; Hübner, C.; Henning, F.; Elsner, P. | Conference Paper |
| 2012 | Use of a hot-spot model to describe the influence of particle size and distance between particles on the combustion in a cloud
Kelzenberg, S.; Knapp, S.; Weiser, V.; Eisenreich, N. | Conference Paper |
| 2012 | Verfahren und Vorrichtung zur Herstellung von mit Fasern versetzten Polymerschäumen
Roch, Alexander; Huber, Timo; Anselmann, C. | Patent |
| 2012 | Verhalten von Prüfstäuben bei der Filterprüfung und der Produktqualifikation
Teipel, U.; Eichler, A.-L.; Stadler, R.; Cäsar, J. | Conference Paper |
| 2012 | Verwertung von mineralischen Sekundärrohstoffen durch Agglomeration
Hennig, M.; Schindhelm, S.; Teipel, U. | Book Article |
| 2012 | Vorrichtung und Verfahren zur Erfassung von Projektilen
Deimling, Lukas | Patent |
| 2012 | Zusammensetzung für einen schwer entflammbaren Kunstharzschaum, sowie Verfahren zu dessen Herstellung
Menke, Klaus; Gettwert, Volker; Fischer, S. | Patent |