Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2021Comparison of convolutional neural network training strategies for cone-beam CT image segmentation
Minnema, J.; Wolff, J.; Koivisto, J.; Lucka, F.; Batenburg, K.J.; Forouzanfar, T.; Eijnatten, M. van
Journal Article
2021Compression behavior of typical silicone rubbers for soft robotics applications at elevated temperatures
Utkan, D.; Maruthavanan, D.; Schimanowski, A.; Seibel, A.
Conference Paper
2021Digitalization of directed energy deposition process through a multidirectional height monitoring sensor system
Jothi Prakash, V.; Buhr, M.; Emmelmann, C.
Journal Article
2021The Effect of Geometry on Local Processing State in Additively Manufactured Ti-6Al-4V Lattices
Downing, D.; Miller, J.; McMillan, M.; Leary, M.; Wischeropp, T.; Emmelmann, C.; Brandt, M.
Journal Article
2021Effect of heat accumulation on the single track formation during laser metal deposition and development of a framework for analyzing new process strategies
Heilemann, M.; Jothi Prakash, V.; Beulting, L.; Emmelmann, C.
Journal Article
2021Efficient high cone-angle artifact reduction in circular cone-beam CT using deep learning with geometry-aware dimension reduction
Minnema, J.; Eijnatten, M. Van; Sarkissian, H. Der; Doyle, S.; Koivisto, J.; Wolff, J.; Forouzanfar, T.; Lucka, F.; Batenburg, K.J.
Journal Article
2021Experimental and numerical mechanical characterization of additively manufactured Ti6Al4V lattice structures considering progressive damage
Drücker, S.; Schulze, M.; Ipsen, H.; Bandegani, L.; Hoch, H.; Kluge, M.; Fiedler, B.
Journal Article
2021Fluid-Structure Interaction Modelling of a Soft Pneumatic Actuator
Maruthavanan, D.; Seibel, A.; Schlattmann, J.
Journal Article
2021Fraunhofer-Einrichtung für Additive Produktionstechnologien. Jahresbericht 2020
 
Annual Report
2021Image-Based Geometrical Characterization of Nodes in Additively Manufactured Lattice Structures
Lozanovski, B.; Downing, D.; Tino, R.; Tran, P.; Shidid, D.; Emmelmann, C.; Qian, M.; Choong, P.; Brandt, M.; Leary, M.
Journal Article
2021InSensa - In-Prozess-Sensorik und adaptive Regelungssystem für die additive Fertigung. Gemeinsamer Abschlussbericht
Pastors, Felix; Renken, Volker; Sorg, Michael; Moze, Marcel; Diaz del Castillo, Juan Miguel; Augustin, Jan Lukas; Hartter, Tim; Draeger, André; Kleimenhagen, Guido; Kogel-Hollacher, Markus; Poppinga, Jann; Jacobsmühlen, Joschka zur
Report
2021Integration additiver Herstellverfahren in die industrielle Prozess-, Fertigungs- und IT-Kette
D’Agostino, Nikolai; Billmeyer, Jonas; Denkena, Berend; Glockner, Philipp; Lindecke, Peter Nils Johannes; Michael, Jochen; Riedel, Torge Andreas; Sittig, Dominic; Waldschmidt, Johannes; Wichmann, Marcel
Report
2021On the digital twin application and the role of artificial intelligence in additive manufacturing: A systematic review
Bartsch, K.; Pettke, A.; Hübert, A.; Lakämper, J.; Lange, F.
Journal Article
2021On the limits of finite element models created from (micro)CT datasets and used in studies of bone-implant-related biomechanical problems
Marcián, P.; Borák, L.; Zikmund, T.; Horáčková, L.; Kaiser, J.; Joukal, M.; Wolff, J.
Journal Article
2021Remote control of a soft walking robot
Schiller, L.; Seibel, A.
Conference Paper
2021Topology optimization of highly stressed machine tool components using the SLM process
Denkena, B.; Bergmann, B.; Klemme, H.; Beyer, R.-E.; Blunk, H.
Conference Paper
2021Toward industrial silicone 3D printing of soft robots
Weigand, F.; Nguyen, A.M.; Wolff, J.; Seibel, A.
Conference Paper
2021Toward the Direct Synthesis of HDPE Powders for Powder Bed Fusion Based Additive Manufacturing
Wencke, Y.L.; Proes, F.; Imgrund, P.; Luinstra, G.A.
Journal Article
20203D printing in COVID-19: Productivity estimation of the most promising open source solutions in emergency situations
Salmi, M.; Akmal, J.S.; Pei, E.; Wolff, J.; Jaribion, A.; Khajavi, S.H.
Journal Article
2020Additively manufactured negative stiffness structures for shock absorber applications
Corsi, M.; Bagassi, S.; Moruzzi, M.C.; Weigand, F.
Journal Article
2020Benchmark parts for the evaluation of optimized support structures in Laser Powder Bed Fusion of metals
Bartsch, K.; Ohrenberg, J.; Emmelmann, C.
Journal Article
2020Biomimetic design and laser additive manufacturing - A perfect symbiosis?
Gralow, M.; Weigand, F.; Herzog, D.; Wischeropp, T.; Emmelmann, C.
Journal Article
2020Factors influencing powder-properties of TiAl6V4 along the L-PBF process chain
Matthes, S.; Kluge, M.; Jahn, S.; Emmelmann, C.
Journal Article
2020FE-Simulation of the influence by material defects on the endurance of additive built metal parts
Ralf, P.A.; Wenzl, J.-P.; Lindecke, P.; Emmelmann, C.
Journal Article
2020Feasibility study on piston-based feedstock fabrication with Ti-6Al-4V metal injection molding feedstock
Waalkes, L.; Längerich, J.; Holbe, F.; Emmelmann, C.
Journal Article
2020Focus shift control of a novel 30 kW laser remote scanner for large-scale industrial sheet and plate metal applications
Cerwenka, G.; Paternina, J.; Elhefnawy, M.; Wollnack, J.; Emmelmann, C.
Journal Article
2020Future AM. The Next Generation of Additive Manufacturing Processes
Schleifenbaum, Johannes Heinrich; Tenbrock, Christian; Emmelmann, Claus; Leyens, Christoph; Brückner, Frank; Michaelis, Alexander
Book Article
2020A Gait Pattern Generator for Closed-Loop Position Control of a Soft Walking Robot
Schiller, L.; Seibel, A.; Schlattmann, J.
Journal Article
2020Improvement of Fatigue Strength in Lightweight Selective Laser Melted Alloys by In-Situ and Ex-Situ Composition and Heat Treatment
Awd, M.; Johannsen, J.; Chan, T.; Merghany, M.; Emmelmann, C.; Walther, F.
Conference Paper
2020Influence of laser beam profile on the selective laser melting process of AlSi10Mg
Wischeropp, T.M.; Tarhini, H.; Emmelmann, C.
Journal Article
2020Kit based motion generator for a soft walking robot
Schiller, L.; Maruthavanan, D.; Seibel, A.; Schlattmann, J.
Conference Paper
2020Laser welding of additively manufactured medium manganese steel alloy with conventionally manufactured dual-phase steel
Zapf, H.; Höfemann, M.; Emmelmann, C.
Journal Article
2020Manufacturing, Control, and Performance Evaluation of a Gecko-Inspired Soft Robot
Schiller, L.; Seibel, A.; Schlattmann, J.
Journal Article
2020Non-destructive simulation of node defects in additively manufactured lattice structures
Lozanovski, B.; Downing, D.; Tino, R.; Plessis, A. du; Tran, P.; Jakeman, J.; Shidid, D.; Emmelmann, C.; Qian, M.; Choong, P.; Brandt, M.; Leary, M.
Journal Article
2020Productivity optimization of laser powder bed fusion by hot isostatic pressing
Herzog, D.; Bartsch, K.; Bossen, B.
Journal Article
2020SMART‐Reactors: Tailoring Gas Holdup Distribution by Additively Manufactured Lattice Structures
Spille, C.; Lyberis, A.; Maiwald, M.I.; Herzog, D.; Hoffmann, M.; Emmelmann, C.; Schlüter, M.
Journal Article
2020Three-Dimensional Optical Scanning in Post-kala-azar Dermal Leishmaniasis (PKDL)
Zijlstra, E.E.; Liberton, N.; Musa, A.M.; Slaa, S. te; Wolff, J.
Journal Article
20193D/6D calibration and real-time focus shift compensation for automated 30 kW laser remote scanner
Cerwenka, G.; Wollnack, J.; Krähling, T.; Jayaprakash, R.; Emmelmann, C.
Journal Article
2019Biomechanical performance of cranial implants with different thicknesses and material properties: A finite element study
Marcián, P.; Narra, N.; Borák, L.; Chamrad, J.; Wolff, J.
Journal Article
2019Effect of infrared laser surface treatment on the morphology and adhesive properties of scarfed CFRP surfaces
Harder, S.; Schmutzler, H.; Hergoss, P.; Freese, J. de; Holtmannspötter, J.; Fiedler, B.
Journal Article
2019Future AM. Die nächste Generation additiver Fertigungsverfahren
Schleifenbaum, Johannes Henrich; Tenbrock, C.; Emmelmann, Claus; Leyens, Christoph; Brückner, Frank; Michaelis, Alexander
Book Article
2019Industrial 3D printing for modern machine and handling systems - Potential and solutions
Gorn, M.; Cerwenka, G.; Gralow, M.; Emmelmann, C.
Journal Article
2019Laser Metal Deposition of Titanium Parts with Increased Productivity
Prakash, V.J.; Möller, M.; Weber, J.; Emmelmann, C.
Book Article
2019Measurement of actual powder layer height and packing density in a single layer in selective laser melting
Wischeropp, T.M.; Emmelmann, C.; Brandt, M.; Pateras, A.
Journal Article
2019The next industrial revolution
Emmelmann, C.
Journal Article
2019Novel approach to optimized support structures in laser beam melting by combining process simulation with topology optimization
Bartsch, K.; Lange, F.; Gralow, M.; Emmelmann, C.
Journal Article
2019Segmentation of dental cone-beam CT scans affected by metal artifacts using a mixed-scale dense convolutional neural network
Minnema, J.; Eijnatten, M. van; Hendriksen, A.A.; Liberton, N.; Pelt, D.M.; Batenburg, K.J.; Forouzanfar, T.; Wolff, J.
Journal Article
2019Very high-cycle fatigue properties and microstructural damage mechanisms of selective laser melted AlSi10Mg alloy
Awd, M.; Siddique, S.; Johannsen, J.; Emmelmann, C.; Walther, F.
Journal Article
2019Vorrichtung und Verfahren zum Bestimmen einer Position und/oder Ausrichtung eines Werkstücks
Buhr, Malte; Möller, Mauritz; Emmelmann, Claus
Patent
2018Additive Manufacturing: Printing the future of particle-foam processing
Schütz, J.; Beck, J.; Schmiedeck, M.; Emmelmann, C.
Journal Article
2018Automatisierte Arbeitsplanung und Fertigungssteuerung für die additive Produktion
Emmelmann, C.; Rudolph, J.-P.; Güntzer, F.; Zühlke, S.
Journal Article
2018Development of a flexible low laser power hybrid (LLPH) technology for shipbuilding including additive manufactured semi-automated hand-held unit
Cerwenka, G.; Steinmeier, O.; Petronis, E.; Keßler, T.; Fischer, H.W.A.; Fiedler, W.; Schulze, F.; Emmelmann, C.
Journal Article
2018Development of novel test specimens for characterization of multi-material parts manufactured by material extrusion
Watschke, H.; Waalkes, L.; Schumacher, C.; Vietor, T.
Journal Article
2018Effect of laser surface treatment on the adhesive properties of bonded CFRP joints
Harder, S.; Goralski, P.; Scharnagl, N.; Hergoss, P.; Schmutzler, H.; Fiedler, B.
Conference Paper
2018From Powder to Solid: The Material Evolution of Ti-6Al-4V during Laser Metal Deposition
Surrey, P.; Möller, M.; Emmelmann, C.; Heilemann, M.; Weber, J.
Journal Article
2018How powder characteristics influence
Seyda, V.; Herzog, D.; Emmelmann, C.
Journal Article
2018In-depth characterization of the scanner-based selective laser deburring process
Cerwenka, G.; Surrey, P.; Möller, M.; Conrad, C.; Prakash, V.; Heilemann, M.; Emmelmann, C.
Journal Article
2018Influence of adaptive slice thickness and retained heat effect on laser metal deposited thin-walled freeform structures
Prakash, V.J.; Surrey, P.; Möller, M.; Emmelmann, C.
Journal Article
2018Influences of process conditions on stability of sensor controlled robot-based laser metal deposition
Buhr, M.; Weber, J.; Wenzl, J.-P.; Möller, M.; Emmelmann, C.
Journal Article
2018Investigations on a standardized process chain and support structure related rework procedures of SLM manufactured components
Denkena, B.; Dittrich, M.-A.; Henning, S.; Lindecke, P.
Journal Article
2018Laser metal deposition of bionic aluminum supports
Heilemann, M.; Beckmann, J.; Konigorski, D.; Emmelmann, C.
Journal Article
2018Numerical modelling and experimental validation of thermal history of titanium alloys in laser beam melting
Illies, O.; Li, G.; Jürgens, J.-P.; Ploshikhin, V.; Herzog, D.; Emmelmann, C.
Journal Article
2018Optimization of laser-remote-cutting of CFRP by means of variable exposure delay times - simulation and validation
Oberlander, M.; Canisius, M.; Hergoss, P.; Bartsch, K.; Herzog, D.; Emmelmann, C.
Journal Article
2018Optimization of support structures for the laser additive manufacturing of TiAl6V4 parts
Lindecke, P.N.J.; Blunk, H.; Wenzl, J.-P.; Möller, M.; Emmelmann, C.
Journal Article
2018Organisation von Nachbearbeitungsprozessen in additiven Produktionsstrukturen
Rudolph, J.-P.; Emmelmann, C.
Journal Article
2018Post-processing of additively manufactured cutting edges by laser ablation
Hallmann, S.; Wolny, T.; Emmelmann, C.
Journal Article
2018Properties of copper modified polyamide 12-powders and their potential for the use as laser direct structurable electronic circuit carriers
Balzereit, S.; Proes, F.; Altstädt, V.; Emmelmann, C.
Journal Article
2018Qualification of selective laser-melted Al alloys against fatigue damage by means of measurement and modeling techniques
Awd, M.; Johannsen, J.; Siddique, S.; Emmelmann, C.; Walther, F.
Conference Paper
2018Quality target-based control of geometrical accuracy and residual stresses in laser metal deposition
Möller, M.; Emmelmann, C.
Journal Article
2018Self-learning Calculation for Selective Laser Melting
Rudolph, J.-P.; Emmelmann, C.
Journal Article
2018SLM lattice thermal fields acquired by wide-field thermal camera
McMillan, M.; Leary, M.; Emmelmann, C.; Brandt, M.
Journal Article