Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Pathways and Potentials for III-V on Si Tandem Solar Cells Realized Using a ZnO-Based Transparent Conductive Adhesive

: Heitmann, U.; Bartsch, J.; Kluska, S.; Hauser, H.; Höhn, O.; Hermann, R.; Lackner, D.; Janz, S.; Glunz, S.W.

Postprint urn:nbn:de:0011-n-6248885 (2.3 MByte PDF)
MD5 Fingerprint: dd205b2701f193a10dd8cf15c72c99d6
© IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Erstellt am: 5.3.2021

IEEE Journal of Photovoltaics 11 (2021), Nr.1, S.85-92
ISSN: 2156-3381
ISSN: 2156-3403
Zeitschriftenaufsatz, Elektronische Publikation
Fraunhofer ISE ()
Photovoltaik; Neuartige Photovoltaik-Technologien; Tandemsolarzellen auf kristallinem Silicium

This work presents a new type of transparent conductive adhesive and its electrical and optical properties with regards to an application in III–V on Silicon tandem solar cells. The developed adhesive is based on a doped ZnO and deposited by spray coating. The optical interconnection of the two sub-cells is identified as one of the major challenges due to the reflectance at the bond and possible approaches to reduce the reflectance are investigated by optical simulations. Regarding the electrical interconnection, an ITO-based contact layer reduced the lowest measured connecting resistivity from previously 17 Ω·cm² [1] down to 0.12 Ω·cm². It is shown that the homogeneity of the bond correlates with its conductivity and can be improved by adjusting the glueing process according to the calcination process of the adhesive. Taking both the electrical and optical parameters of the transparent conductive adhesive into account, the efficiency of a triple junction solar cell was estimated.