Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Validation of Hygrothermal Simulations with Wall Performance Experiments in an Environmental Chamber

: Salonvaara, Mikael; Boudreaux, Philip; Desjarlais, Andre; Antretter, Florian; Werling, Eric

Volltext urn:nbn:de:0011-n-6025387 (4.1 MByte PDF)
MD5 Fingerprint: 83f872a79c8867d183c1ecd6355593a8
Erstellt am: 27.7.2021

Kurnitski, J.:
12th Nordic Symposium on Building Physics, NSB 2020. Online resource : Tallinn, Estonia, September 6-9, 2020
Les Ulis: EDP Sciences, 2020 (E3S Web of Conferences 172)
Art. 04010, 8 S.
Nordic Symposium on Building Physics (NSB) <12, 2020, Tallinn>
Konferenzbeitrag, Elektronische Publikation
Fraunhofer IBP ()

Oak Ridge National Laboratory is developing a web tool, built on a rule-based expert system, that aids stakeholders in designing energy-efficient moisture-durable walls. Currently, the tool’s expert system database is mostly populated with expert opinion, but work is being done to incorporate durability assessment based on stochastic hygrothermal modeling. Chamber experiments have been conducted to validate the hygrothermal models. The measured temperature and humidity have been compared with those predicted by the hygrothermal model. Experiments and comparison to one-dimensional hygrothermal modeling results were completed with two walls, a Structural Insulated Panel (SIP) based wall and a Concrete Masonry Unit (CMU) based wall. The two walls were succumbed to typical Chicago weather in ORNL’s Heat, Air and Moisture chamber. The walls were sequentially exposed to different scenarios, including diffusion, wetting, air leakage and solar radiation. For the most part, the hygrothermal simulations can be successfully used to predict the performance of these wall systems for the moisture transport phenomenon. Errors between measured and simulated values decreased as measurements got closer to the interior side of the wall. The root mean square error was larger for relative humidity (up to 17.5%-RH for CMU) than for temperature (up to 4.5°C for CMU wall). The errors were larger for the CMU wall than the wood frame wall. The phenomenon, including liquid water, caused large discrepancies between measurement and simulation results, and simulated results showed slower drying of materials than measured results. The one-dimensional nature of the simulation model made simulating air leaks difficult but not impossible.