Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Rapid vapor-phase direct doping for high-efficiency solar cells

: Kühnhold-Pospischil, Saskia; Steinhauser, Bernd; Richter, Armin; Gust, Elke; Janz, Stefan

Postprint urn:nbn:de:0011-n-5157701 (2.6 MByte PDF)
MD5 Fingerprint: 86db8e32b865bae5ba1dbc37c7050c33
© IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Erstellt am: 7.11.2018

IEEE Journal of Photovoltaics 8 (2018), Nr.6, S.1421-1428
ISSN: 2156-3381
ISSN: 2156-3403
European Commission EC
FP7-Energy; 609788; CHEETAH
Cost-reduction through material optimisation and Higher EnErgy outpuT of solAr pHotovoltaic modules - joining Europe’s Research and Development efforts in support of its PV industry
Zeitschriftenaufsatz, Elektronische Publikation
Fraunhofer ISE ()
boron; diffusion process; photovoltaic cell; p/n-Junction; Photovoltaik; Silicium-Photovoltaik; Epitaxie; Si-Folien und SiC-Abscheidungen

An alternative boron emitter diffusion process called rapid vapor-phase direct doping (RVD) is studied and applied to n -type silicon solar cells with a tunnel oxide passivated electron contact (TOPCon). The RVD emitter diffusion process occurs under an atmosphere containing only the dopant gas and hydrogen. Thus, compared with standard tribromide diffusion processes, no oxygen is present. Hence, no boron glasses form during the RVD process. Consequently, a faster diffusion process with fewer chemical treatments after the diffusion process compared with standard tribromide processes is possible. In this paper, three different RVD emitter surface dopant concentrations and dopant depths were achieved by process parameter variations. These RVD emitters were applied to TOPCon cells, and their cell characteristics were compared with profiles of TOPCon reference cells with standard boron-diffused emitters. Up to 24.0% cell efficiency, 697.6 mV open-circuit voltage, 41.8 mA/cm2 short-circuit current density, and 82.1% fill factor were reached by the best TOPCon cell with an RVD emitter. Nevertheless, compared with the reference, all cells with RVD emitters exhibited efficiency losses. Hence, to further optimize cells with RVD emitters, in-depth characterizations were conducted. The cell efficiency of cells with an RVD emitter is mainly limited by two main reasons: First, effective carrier lifetime degradation was observed, resulting in voltage losses, and second, for RVD diffusion temperatures above 980 ∘C, a flattening of textured cell surfaces was detected leading to current losses. In order to overcome these issues, an adapted two-step RVD emitter diffusion process is suggested for future experiments.