Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2020The International Technology Roadmap for Photovoltaics and the Significance of it's Decade-Long Projections
Baliozian, P.; Tepner, S.; Fischer, M.; Trube, J.; Herritsch, S.; Gensowski, K.; Clement, F.; Nold, S.; Preu, R.
Konferenzbeitrag
2020Laser Assisted Separation Processes for Bifacial pSPEER Shingle Solar Cells
Münzer, A.; Baliozian, P.; Ahmed, K.; Nair, A.; Lohmüller, E.; Fellmeth, T.; Spribille, A.; Preu, R.
Konferenzbeitrag
2020Postmetallization "Passivated Edge Technology" for Separated Silicon Solar Cells
Baliozian, P.; Al-Akash, M.; Lohmüller, E.; Richter, A.; Fellmeth, T.; Münzer, A.; Wöhrle, N.; Saint-Cast, P.; Stolzenburg, H.; Spribille, A.; Preu, R.
Zeitschriftenaufsatz
2020Project "Rock-Star" - High-Speed Rotary Printing for Solar Cell Metallization: From Vision to Reality
Lorenz, A.; Röth, J.; Zengerle, K.; Linse, M.; Klawitter, M.; Tepner, S.; Wirth, N.; Greutmann, R.; Lehner, M.; Senne, A.; Reukauf, D.; Mette, A.; Hage, F.; Drews, M.; Gombert, S.; Brocker, H.; Rohde, J.; Dörsam, E.; Clement, F.; Preu, R.
Konferenzbeitrag
2019"Project FINALE" - Screen and Screen Printing Process Development for Ultra-Fine-Line Contacts below 20µm Finger Width
Clement, F.; Linse, M.; Tepner, S.; Wengenmeyer, N.; Ney, L.; Krieg, K.; Lorenz, A.; Pospischil, M.; Bechmann, S.; Oehrle, K.; Steckemetz, S.; Preu, R.
Konferenzbeitrag
2019Impact of POCl3 Diffusion Process Parameters on Oxygen Precipitation in Czochralski-Grown Silicon
Maus, S.; Lohmüller, S.; Mu, D.; Schön, J.; Niewelt, T.; Wolf, A.; Preu, R.
Konferenzbeitrag
2018Bifacial pSPEER Solar Cells for Shingle Modules
Baliozian, P.; Fellmeth, T.; Wöhrle, N.; Lohmüller, E.; Preu, R.
Konferenzbeitrag
2018Emitter Formation and Passivation Dependence on Crystal Grain Orientations after Atmospheric Pressure Dry Nanotexturing
Ridoy, A.I.; Kafle, B.; Saint-Cast, P.; Lohmüller, S.; Norouzi, M.H.; Clochard, L.; Duffy, E.; Hofmann, M.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2018Metallization Fraction of Bifacial pSPEER Shingle Solar Cells
Al-Akash, M.; Baliozian, P.; Lohmüller, E.; Fellmeth, T.; Wöhrle, N.; Preu, R.
Konferenzbeitrag
2017High throughput printing for highly efficient cost-effective Si solar cells
Clement, F.; Lorenz, A.; Pospischil, M.; Biro, D.; Brocker, H.; Bangel, D.; Greutmann, R.; Lehner, M.; Ott, T.; Hage, F.; Oppelt, K.; Honold, T.; Wende, L.; Ringel, M.; Senne, A.; Rohde, J.; Preu, R.
Konferenzbeitrag
2017Increasing the efficiency of multicrystalline silicon PERC solar cells from currently 19% to 20%
Greulich, J.; Lohmüller, E.; Saint-Cast, P.; Werner, S.; Wasmer, S.; Horst, A.J. van der; Preu, R.
Konferenzbeitrag
2017Key aspects for fabrication of p-type Cz-Si PERC solar cells exceeding 22% conversion efficiency
Werner, S.; Lohmüller, E.; Saint-Cast, P.; Greulich, J.M.; Weber, J.; Schmidt, S.; Moldovan, A.; Brand, A.A.; Dannenberg, T.; Mack, S.; Wasmer, S.; Demant, M.; Linse, M.; Ackermann, R.; Wolf, A.; Preu, R.
Konferenzbeitrag
2017A new pilot research facility for HJT and selective contact solar cells - PV-TEC SELECT
Rentsch, J.; Bivour, M.; Erath, D.; Feldmann, F.; Fischer, A.; Mack, S.; Moldovan, A.; Temmler, J.; Hermle, M.; Glunz, S.W.; Preu, R.
Konferenzbeitrag
2017The SPEER solar cell - simulation study of shingled bifacial PERC-technology-based stripe cells
Wöhrle, N.; Fellmeth, T.; Lohmüller, E.; Baliozian, P.; Fell, A.; Preu, R.
Konferenzbeitrag
2017Technical and economic potential of PV in Lebanon and Jordan aiming for regional readiness level development
Haidar, M.; Baliozian, P.; Mustafa, A.; Mourad, S.; Preu, R.
Konferenzbeitrag
2016Photovoltaic Development Standardizing Based on Roadmaps and Technology Readiness Levels
Baliozian, P.; Mourad, S.; Morse, D.; Kim, S.; Friedrich, L.; Preu, R.
Konferenzbeitrag
2015Comprehensive comparison of different fine line printing technologies addressing the seed and plate approach with Ni-Cu-plating
Lorenz, A.; Kraft, A.; Gredy, C.; Filipovic, A.; Binder, S.; Krüger, K.; Bartsch, J.; Clement, F.; Biro, D.; Preu, R.; Reinecke, H.
Konferenzbeitrag
2015Comprehensive simulation and acceleration of the foil-metallization laser process
Graf, M.; Nekarda, J.; Lazzarotto Togny, F.; Streek, A.; Böhme, R.; Preu, R.
Zeitschriftenaufsatz
2015Foil metallization process for PERC solar cells towards industrial feasibility
Graf, M.; Eberlein, D.; Nagel, H.; Nekarda, J.; Böhme, R.; Streek, A.; Preu, R.
Konferenzbeitrag
2015Progress on industrial solar cell front side metallization by parallel dispensing technology
Pospischil, M.; Kuchler, M.; Klawitter, M.; Efinger, R.; Rodriguez, C.; Padilla, A.; Gentischer, H.; König, M.; Hörteis, M.; Wende, L.; Mette, A.; Clement, F.; Preu, R.; Biro, D.
Konferenzbeitrag
2014The BOSCO solar cell: Simulation and experiment
Fertig, F.; Greulich, J.; Krauss, K.; Clement, F.; Biro, D.; Preu, R.; Rein, S.
Zeitschriftenaufsatz
2014Investigations on the passivation mechanism of AlN:H and AlN:H-SiN:H stacks
Krugel, G.; Jenkner, F.; Moldovan, A.; Wolke, W.; Rentsch, J.; Preu, R.
Zeitschriftenaufsatz
2014Optimization of multi-layer metallization design for large-area back-contact back-junction solar cells
Hendrichs, M.; Keding, R.; Spribille, A.; Fellmeth, T.; Nold, S.; Clement, F.; Wolf, A.; Biro, D.; Preu, R.
Konferenzbeitrag
2013Cost-optimized metallization layout for metal wrap through (MWT) solar cells and modules
Hendrichs, M.; Thaidigsmann, B.; Fellmeth, T.; Nold, S.; Spribille, A.; Herrmann, P.; Mittag, M.; Hädrich, I.; Eitner, U.; Clement, F.; Biro, D.; Preu, R.
Konferenzbeitrag
2013Investigation of methods for adhesion characterization of evaporated aluminum layers
Kumm, J.; Eberlein, D.; Hartmann, P.; Wolke, W.; Wolf, A.; Preu, R.
Konferenzbeitrag
2013Laser doping from borosilicate glass for metallization of boron emitters
Fernandez-Robledo, S.; Jäger, U.; Lohmüller, E.; Nekarda, J.; Preu, R.
Konferenzbeitrag
2013Laser-based foil metallization for industrial PERC solar cells
Nekarda, J.; Graf, M.; Rodofili, A.; Preu, R.; Böhme, R.; Sontag, D.
Konferenzbeitrag
2013P-Type MWT solar cells: Current status and future expectations
Thaidigsmann, B.; Hendrichs, M.; Nold, S.; Lohmüller, E.; Wolf, A.; Clement, F.; Biro, D.; Preu, R.
Konferenzbeitrag
2013Passivation of solar cell emitters using aluminum nitride
Krugel, G.; Sharma, A.; Moldovan, A.; Wolke, W.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2013Potential-induced degradation on cell level: The inversion model
Saint-Cast, P.; Nagel, H.; Wagenmann, D.; Schön, J.; Schmitt, P.; Reichel, C.; Glunz, S.W.; Hofmann, M.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2013Technologies for mass production of > 20% efficient P-Type silicon solar cells
Mack, S.; Wolf, A.; Thaidigsmann, B.; Lohmüller, E.; Jäger, U.; Pospischil, M.; Clement, F.; Eberlein, D.; Preu, R.; Biro, D.
Konferenzbeitrag
2013Wet chemical single-side emitter etch back for MWT solar cells with AL-BSF and challenges for via paste selection
Spribille, A.; Lohmüller, E.; Thaidigsmann, B.; Hamid, R.; Nussbaumer, H.; Clement, F.; Preu, R.
Konferenzbeitrag
2012Cost modeling of silicon solar cell production innovation along the PV value chain
Nold, S.; Voigt, N.; Friedrich, L.; Weber, D.; Hädrich, I.; Mittag, M.; Wirth, H.; Thaidigsmann, B.; Hofmann, M.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2012Evaluation of via pastes for p- and n-type metal wrap through (MWT) solar cells
Lohmüller, E.; Thaidigsmann, B.; Werner, S.; Clement, F.; Wolf, A.; Biro, D.; Preu, R.
Konferenzbeitrag
2012HIP-MWT solar cells - pilot-line cell processing and module integration
Drews, A.; Clement, F.; Spribille, A.; Thaidigsmann, B.; Linse, M.; Gutscher, S.; Werner, S.; Reitenbach, V.; Ould Chighali, E.; Wolf, A.; Zimmer, M.; Nekarda, J.; Haedrich, I.; Tranitz, M.; Eitner, U.; Wirth, H.; Wilson, H.R.; Biro, D.; Preu, R.
Konferenzbeitrag
2012Inline microwave-excited plasma deposition of thin amorphous silicon layers
Jeurink, J.; Morzè, N. von; Kroely, L.; Hofmann, M.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2012Multifunctional PECVD layers - cost analysis of the X-pert approach
Seiffe, J.; Nold, S.; Hofmann, M.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2012MWT solar cell processing by use of isishape® solar etch® SiD for rear contact and edge isolation
Spribille, A.; Greulich, J.; Lohmüller, E.; Clement, F.; Specht, J.; Biro, D.; Preu, R.; Doll, O.; Tüshaus, C.; Stockum, W.; Köhler, I.
Konferenzbeitrag
2012Nanosecond laser annealing to decrease the damage of picosecond laser ablation of anti-reflection layers on textured silicon surfaces
Brand, A.; Knorz, A.; Zeidler, R.; Nekarda, J.-F.; Preu, R.
Konferenzbeitrag
2012Process characterisation of MWT solar cells - a new method to analyse via contacts
Reitenbach, V.; Spitz, M.; Drews, A.; Weiß, M.; Ould Chighali, E.; Thaidigsmann, B.; Lohmüller, E.; Knorz, A.; Clement, F.; Wolf, A.; Biro, D.; Preu, R.
Konferenzbeitrag
2012A review of PECVD aluminum oxide for surface passivation
Saint-Cast, P.; Hofmann, M.; Kühnhold, S.; Kania, D.; Weiss, L.; Heo, Y.-H.; Billot, E.; Olwal, P.; Trogus, D.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2012Selective emitters in passivated emitter and rear silicon solar cells enabling 20% on large area P-type silicon
Jäger, U.; Mack, S.; Wufka, C.; Wolf, A.; Biro, D.; Nekarda, J.; Preu, R.
Konferenzbeitrag
2012Sputtered aluminum oxide for rear side passivation of p-type silicon solar cells
Krugl, G.; Wolke, W.; Wagner, F.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2012Synergistic effects of rear-surface passivation and the metal wrap through concept
Thaidigsmann, B.; Drews, A.; Fellmeth, T.; Saint-Cast, P.; Wolf, A.; Clement, F.; Biro, D.; Preu, R.
Zeitschriftenaufsatz
201120.1% efficient silicon solar cell with aluminum back surface field
Fellmeth, T.; Mack, S.; Bartsch, J.; Erath, D.; Jäger, U.; Preu, R.; Clement, F.; Biro, D.
Zeitschriftenaufsatz
2011Beam Shaping for High Throughput Laser Doped Selective Emitter Solar Cells
Jäger, U.; Fertig, F.; Oesterlin, P.; Büchel, A.; Ullmann, R.; Zühlke, H.-U.; Preu, R.
Konferenzbeitrag
2011HIP-MWT - A New Cell Concept for Industrial Processing of High-Performance Metal Wrap Through Silicon Solar Cells
Thaidigsmann, B.; Spribille, A.; Plagwitz, H.; Schubert, G.; Fertig, F.; Clement, F.; Wolf, A.; Biro, D.; Preu, R.
Konferenzbeitrag
2011Increased Ion Energies for Texturing in a High-Throughput Plasma Tool
Piechulla, P.; Seiffe, J.; Hofmann, M.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2011Interface Characterization of Dry-Etched Emitters
Clement, C.; Seiffe, J.; Hofmann, M.; Rentsch, J.; Preu, R.; Naumann, V.; Werner, M.
Konferenzbeitrag
2011Investigations on the Impact of Wafer Grippers on Optical and Electrical Properties of Alkaline Textured and A-Si Passivated Surfaces
Nold, S.; Aßmus, M.; Weil, A.; Haunschild, J.; Savio, C.; Hofmann, M.; Rentsch, J.; Preu, R.; Kunz, M.
Konferenzbeitrag
2011A Novel Approach for Mask-Free Selective Emitter Technology Combining Laser Doping and Wet Chemical Etch Back
Volk, A.; Jäger, U.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2011Plasma Deposition of a Amorphous Silicon Dopant Sources
Jeurink, J.; Seiffe, J.; Hofmann, M.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2011Processing of Highly-Efficient MWT Silicon Solar Cells
Clement, F.; Thaidigsmann, B.; Hoenig, R.; Fellmeth, T.; Spribille, A.; Lohmüller, E.; Krieg, A.; Glatthaar, M.; Wirth, H.; Biro, D.; Preu, R.; Menkoe, M.; Meyer, K.; Lahmer, D.; Krokoszinski, H.-J.; Neidert, M.; Henning, A.; Mohr, C.; Zhang, W.
Zeitschriftenaufsatz
2011Screen Printing Aluminium Pastes for Thin Silicon Solar Cells with Passivated Rear Surface and LFC Contacts
Schwab, C.; Thaidigsmann, B.; Nold, S.; Linse, M.; Lottspeich, F.; Prince, A.; Young, R.; Fuge, G.; Weigand, P.; Wolf, A.; Clement, F.; Biro, D.; Preu, R.
Konferenzbeitrag
2011Surface Passivation of Highly and Lowly Doped P-Type Silicon Surfaces with PECVD Al2O3 for Industrially Applicable Solar Cell Concepts
Saint-Cast, P.; Billot, E.; Olwal, P.; Kühnhold, S.; Richter, A.; Hofmann, M.; Rentsch, J.; Preu, R.
Konferenzbeitrag
201021.1% efficient PERC silicon solar cells on large scale by using inline sputtering for metallization
Reinwand, D.; Specht, J.; Stüwe, D.; Seitz, S.; Nekarda, J.-F.; Biro, D.; Preu, R.; Trassl, R.
Konferenzbeitrag
2010Accurate IV-measurement for back contact solar cells
Glatthaar, M.; Hohl-Ebinger, J.; Krieg, A.; Greif, M.; Greco, L.; Clement, F.; Rein, S.; Warta, W.; Preu, R.
Konferenzbeitrag
2010Beam shaping - the key to high throughput selective emitter laser processing with a single laser system
Jäger, U.; Oesterlin, P.; Kimmerle, A.; Preu, R.
Konferenzbeitrag
2010Characterisation of local Al-BSF formation for PERC solar cell structures
Grasso, F.S.; Gautero, L.; Rentsch, J.; Preu, R.; Lanzafame, R.
Konferenzbeitrag
2010Characterization and optimization of laser edge isolation
Gutscher, S.; Knorz, A.; Gundel, P.; Greulich, J.; Preu, R.
Konferenzbeitrag
2010Characterization of aluminium screen-printed local contacts
Grasso, F.S.; Gautero, L.; Rentsch, J.; Preu, R.; Lanzafame, R.
Konferenzbeitrag
2010Combining the advantages of wrap through metallization and rear surface passivation into industrial MWT-PERC devices
Thaidigsmann, B.; Wolf, A.; Clement, F.; Biro, D.; Preu, R.
Konferenzbeitrag
2010Comparison of different rear contacting approaches for industrial PERC solar cells on MC-SI wafer
Gautero, L.; Kania, D.; Seiffe, J.; Knorz, A.; Specht, J.; Nekarda, J.; Hofmann, M.; Rentsch, J.; Sallese, J.-M.; Preu, R.
Konferenzbeitrag
2010Comparison of three different metallization concepts for LFC cells
Nekarda, J.-F.; Hörteis, M.; Lottspeich, F.; Wolf, A.; Preu, R.
Konferenzbeitrag
2010Development and modelling of crystalline silicon based metal wrap through (MWT) solar cells
Fellmeth, T.; Meyer, K.; Greulich, J.; Clement, F.; Biro, D.; Preu, R.; Menkoe, M.; Lahmer, D.; Krokoszinski, H.-J.
Konferenzbeitrag
2010Dispensing of etching paste and inkjetting of diffusion barrier for MWT solar cell processing
Spribille, A.; Clement, F.; Erath, D.; Specht, J.; Biro, D.; Preu, R.; Köhler, I.; Doll, O.; Stockum, W.; Tueshaus, C.
Konferenzbeitrag
2010Firing stable passivation layers for the front and rear side of high efficiency N-type back-contact back-junction solar cells
Woehl, R.; Mack, S.; Kohn, N.; Preu, R.; Biro, D.
Konferenzbeitrag
2010Front surface passivation for industrial-type solar cells by silicon oxynitride - silicon nitride stacks
Schwab, C.; Hofmann, M.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2010Fundamental reactions during the formation of fired silver contacts and solar cell results
Hörteis, M.; Benick, J.; Nekarda, J.; Richter, A.; Preu, R.; Glunz, S.W.
Konferenzbeitrag
2010Fundamental studies on the front contact formation resulting in a 21% efficiency silicon solar cell with printed rear and front contacts
Hörteis, M.; Benick, J.; Nekarda, J.; Richter, A.; Preu, R.; Glunz, S.W.
Konferenzbeitrag
2010High efficiency p-type PERC solar cells applying PECVD ALOx layers
Saint-Cast, P.; Benick, J.; Kania, D.; Billot, E.; Richter, A.; Hermle, M.; Hofmann, M.; Rentsch, J.; Preu, R.; Glunz, S.W.
Konferenzbeitrag
2010High speed laser drilling: Parameter evaluation and characterisation
Knorz, A.; Gutscher, S.; Fell, A.; Gundel, P.; Preu, R.
Konferenzbeitrag
2010High temperature stability of PECVD aluminium oxide layers applied as negatively charged passivation on c-Si surfaces
Kania, D.; Saint-Cast, P.; Hofmann, M.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2010Improved emitters by dry etching
Seiffe, J.; Khandelwal, R.; Clement, C.; Jäger, U.; Hofmann, M.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2010Industrial deposition of PECVD AIOx for rear passivation of PERC-type mc-SI solar cells
Rentsch, J.; Sperlich, H.-P.; Kohn, N.; Kania, D.; Saint-Cast, P.; Schetter, C.; Hofmann, M.; Preu, R.
Konferenzbeitrag
2010Industrially feasible rear side concept for n-type silicon solar cells approaching 700 mV of Voc
Suwito, D.; Jäger, U.; Benick, J.; Janz, S.; Hermle, M.; Preu, R.; Glunz, S.W.
Konferenzbeitrag
2010Influence of doping profile of highly doped regions for selective emitter solar cells
Jäger, U.; Mack, S.; Kimmerle, A.; Wolf, A.; Preu, R.
Konferenzbeitrag
2010Inkjet structured EWT silicon solar cells with evaporated aluminum metallization and laser-fired contacts
Fallisch, A.; Stüwe, D.; Neubauer, R.; Wagenmann, D.; Keding, R.; Nekarda, J.; Preu, R.; Biro, D.
Konferenzbeitrag
2010Investigation of the minority carrier lifetime reduction during industrial DC-sputtering of metal seed layers
Reinwand, D.; Graf, M.; Hartmann, P.; Preu, R.; Trassl, R.
Konferenzbeitrag
2010n-Type silicon - enabling efficiencies > 20% in industrial production
Glunz, S.W.; Benick, J.; Biro, D.; Bivour, M.; Hermle, M.; Pysch, D.; Rauer, M.; Reichel, C.; Richter, A.; Rüdiger, M.; Schmiga, C.; Suwito, D.; Wolf, A.; Preu, R.
Konferenzbeitrag
2010P-type Cz-Si PERC-type solar cells applying PECVD aluminium oxide rear surface passivation
Saint-Cast, P.; Kania, D.; Billot, E.; Weiss, L.; Hofmann, M.; Gautero, L.; Kohn, N.; Biro, D.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2010Paste development for screen printed mc-Si MWT solar cells exceeding 17% efficiency
Hoenig, R.; Clement, F.; Menkoe, M.; Retzlaff, M.; Biro, D.; Preu, R.; Neidert, M.; Henning, A.; Mohr, C.; Zhang, W.
Konferenzbeitrag
2010Pilot line processing of 18.6% efficient rear surface passivated large area solar cells
Wolf, A.; Wotke, E.A.; Walczak, A.; Mack, S.; Bitnar, B.; Koch, C.; Preu, R.; Biro, D.
Konferenzbeitrag
2010Pilot processing of 18.6% efficient rear surface passivated silicon solar cells with screen printed front contacts
Wolf, A.; Wotke, E.A.; Mack, S.; Nekarda, J.-F.; Biro, D.; Preu, R.; Schlegel, K.; Weber, T.; Lossen, J.; Böscke, T.; Grohe, A.; Engelhart, P.; Müller, J.W.; Schubert, G.; Plagwitz, H.; Gassenbauer, Y.
Konferenzbeitrag
2010Pilot-line processing of highly-efficient MWT silicon solar cells
Clement, F.; Thaidigsmann, B.; Hoenig, R.; Fellmeth, T.; Spribille, A.; Lohmüller, E.; Krieg, A.; Glatthaar, M.; Wirth, H.; Biro, D.; Preu, R.; Menkoe, M.; Meyer, K.; Lahmer, D.; Krokoszinski, H.-J.; Neidert, M.; Henning, A.; Mohr, C.; Zhang, W.
Konferenzbeitrag
2010Plasma single-sided etching for rear emitter etch-back and flattening of industrial crystalline silicon solar cells
Khandelwal, R.; Hofmann, M.; Trogus, D.; Gautero, L.; Seiffe, J.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2010Purified steam for industrial thermal oxidation processes
Mack, S.; Biro, D.; Wolf, A.; Thaidigsmann, B.; Walczak, A.; Spiegelman, J.J.; Preu, R.
Konferenzbeitrag
2010Silicon solar cells using aluminum foil as rear side metallization reaching 21.0 % efficiency
Nekarda, J.-F.; Lottspeich, F.; Wolf, A.; Preu, R.
Konferenzbeitrag
2010A simple laser based process for the formation of a LBSF for n-type silicon solar cells
Jäger, U.; Suwito, D.; Benick, J.; Janz, S.; Hermle, M.; Glunz, S.W.; Preu, R.
Konferenzbeitrag
2010Simultaneous front emitter and rear surface passivation by thermal oxidation - an industrially feasible approach to a 19% efficient PERC device
Mack, S.; Jäger, U.; Wolf, A.; Nold, S.; Preu, R.; Biro, D.
Konferenzbeitrag
2010Single side polish etching for the rear side of crystalline silicon wafers
Kästner, G.; Zimmer, M.; Birmann, K.; Souren, F.M.M.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2010SiNTO EWT silicon solar cells
Fallisch, A.; Keding, R.; Kästner, G.; Bartsch, J.; Werner, S.; Stüwe, D.; Specht, J.; Preu, R.; Biro, D.
Konferenzbeitrag
2010Structuring technology and simulation of high efficiency back-contact back-junction silicon solar cells under low concentration
Woehl, R.; Rüdiger, M.; Erath, D.; Stüwe, D.; Preu, R.; Biro, D.
Konferenzbeitrag
2010Towards 19% efficient industrial PERC devices using simultaneous front emitter and rear surface passivation by thermal oxidation
Mack, S.; Jäger, U.; Kästner, G.; Wotke, E.A.; Belledin, U.; Wolf, A.; Preu, R.; Biro, D.
Konferenzbeitrag
2009Advances in electroless nickel plating for the metallization of silicon solar cells using different structuring techniques for the ARC
Aleman, M.; Bay, N.; Barucha, D.; Knorz, A.; Biro, D.; Preu, R.; Glunz, S.W.
Konferenzbeitrag
2009All-screen-printed 120-µm-thin large-area silicon solar cells applying dielectric rear passivation and laser-fired contacts reaching 18% efficiency
Gautero, L.; Hoffmann, M.; Rentsch, J.; Bitnar, B.; Sallese, J.-M.; Preu, R.
Konferenzbeitrag
2009All-screen-printed 120-µM-thin large-area silicon solar cells applying dielectric rear passivation and laser-fired contacts reaching 18% efficiency
Gautero, L.; Hofmann, M.; Rentsch, J.; Lemke, A.; Mack, S.; Seiffe, J.; Nekarda, J.; Biro, D.; Wolf, A.; Bitnar, B.; Sallese, J.M.; Preu, R.
Konferenzbeitrag
2009Control and optimization of thermal oxidation processes for industrial solar cell fabrication
Mack, S.; Lemke, A.; Wolf, A.; Holzinger, B.; Zimmer, M.; Biro, D.; Preu, R.
Konferenzbeitrag
2009Development of crystalline silicon based metal wrap through (MWT) solar cells for low concentrator (2-30x) applications
Fellmeth, T.; Fritz, S.; Menkö, M.; Mingirulli, N.; Glatthaar, M.; Clement, F.; Biro, D.; Preu, R.
Konferenzbeitrag
2009Development of via pastes for high efficiency MWT cells with a low shunting behaviour
Neidert, M.; Clement, F.; Menkö, M.; Hoenig, R.; Henning, A.; Zhang, W.; Biro, D.; Preu, R.
Konferenzbeitrag
2009Firing stable passivation with a-Si/SiNx stack layers for crystalline silicon solar cells
Saint-Cast, P.; Hofmann, M.; Dimitrova, T.; Wagenmann, D.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2009Impact of solar cell manufacturing processes on thermal oxide-passivated silicon surfaces
Mack, S.; Wolf, A.; Wotke, E.A.; Lemke, A.; Holzinger, B.; Dimitrova, T.; Biro, D.; Preu, R.
Konferenzbeitrag
2009Industrial negatively charged c-Si surface passivation by inline PECVD AlOx
Kania, D.; Saint-Cast, P.; Wagenmann, D.; Hofmann, M.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2009Industrial PVD metallization for high efficiency crystalline silicon solar cells
Nekarda, J.; Reinwand, D.; Grohe, A.; Hartmann, P.; Preu, R.; Trassl, R.; Wieder, S.
Konferenzbeitrag
2009Industrial sputtering metallization technology for crystalline silicon solar cells
Reinwand, D.; Nekarda, J.; Grohe, A.; Hartmann, P.; Trassl, R.; Preu, R.
Konferenzbeitrag
2009Industrially feasible mc-Si solar cells with fine line printed front contacts on high emitter sheet resistance towards 17% efficiency
Clement, F.; Menkö, M.; Erath, D.; Retzlaff, M.; Goetz, A.K.; Hörteis, M.; Bartsch, J.; Hoenig, R.; Belledin, U.; Biro, D.; Preu, R.
Konferenzbeitrag
2009Influence of different laser parameters in laser doping from phosphosilicate glass
Okanovic, M.; Jäger, U.; Ahrens, M.; Stute, U.; Grohe, A.; Preu, R.
Konferenzbeitrag
2009Laser ablation of antireflection coatings for plated contacts yielding solar cell efficiencies above 20 %
Knorz, A.; Aleman, M.; Grohe, A.; Preu, R.; Glunz, S.W.
Konferenzbeitrag
2009Laser ablation of etch resists for structuring and lift-off processes
Knorz, A.; Grohe, A.; Preu, R.
Konferenzbeitrag
2009LFC on screen printed aluminium rear side metallization
Nekarda, J.; Stumpp, S.; Gautero, L.; Hörteis, M.; Grohe, A.; Biro, D.; Preu, R.
Konferenzbeitrag
2009Overview on crystalline silicon solar cells using PECVD rear passivation and laser-fired contacts
Hofmann, M.; Saint-Cast, P.; Suwito, D.; Seiffe, J.; Schmidt, C.; Kambor, S.; Gautero, L.; Kohn, N.; Nekarda, J.-F.; Leimenstoll, A.; Wagenmann, D.; Erath, D.; Catoir, J.; Wolke, W.; Janz, S.; Biro, D.; Grohe, A.; Rentsch, J.; Glunz, S.W.; Preu, R.
Konferenzbeitrag
2009Pilot-line processing of Cz-Si MWT solar cells with an efficiency gain of 0,3%
Lahmer, D.; Lossen, J.; Meyer, K.; Krokoszinski, H.-J.; Clement, F.; Menkö, M.; Hoenig, R.; Biro, D.; Preu, R.
Konferenzbeitrag
2009Pilot-line processing of screen-printed Cz-Si MWT solar cells exceeding 17% efficiency
Clement, F.; Menkö, M.; Hoenig, R.; Haunschild, J.; Biro, D.; Preu, R.; Lahmer, D.; Lossen, J.; Krokoszinski, H.-J.
Konferenzbeitrag
2009PV-TEC: Retrospection to the three years of operation of a production oriented research platform
Biro, D.; Belledin, U.; Weil, A.; Zimmer, M.; Grohe, A.; Rein, S.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2009Relevant pinhole characterisation methods for dielectric layers for silicon solar cells
Saint-Cast, P.; Tanay, F.; Aleman, M.; Reichel, C.; Bartsch, J.; Hofmann, M.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2009A review on 5 years cell development within the european integrated project crystal clear
John, J.; Beaucarne, G.; Choulat, P.; Ma, Y.; Russell, R.; Romijn, I.; Lamers, M.; Mewe, A.; Weeber, A.; Hofmann, M.; Preu, R.; Gautero, J.; Slaoui, A.; Quang, A.Q. le; Nichiporuk, O.; Canizo, C. del; Pan, A.; Solheim, H.; Evju, J.; Nagel, H.; Bitnar, B.; Heemeier, M.; Weber, T.; Kaes, M.; Raabe, B.; Haverkamp, H.; Struempel, C.; Hahn, G.
Konferenzbeitrag
2009Selective emitter by laser doping from phosphosilicate glass
Jäger, U.; Okanovic, M.; Hörteis, M.; Grohe, A.; Preu, R.
Konferenzbeitrag
2009The SINTO process: Utilizing a SINx anti-reflection layer for emitter masking during thermal oxidation
Wolf, A.; Walczak, A.; Mack, S.; Wotke, E.A.; Lemke, A.; Bertram, C.; Belledin, U.; Biro, D.; Preu, R.
Konferenzbeitrag
2009Thermal oxidation as a key technology for high efficiency screen printed industrial silicon solar cells
Biro, D.; Mack, S.; Wolf, A.; Lemke, A.; Belledin, U.; Erath, D.; Holzinger, B.; Wotke, E.A.; Hofmann, M.; Gautero, L.; Nold, S.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2009Thermal stability of PECVD a-Si:H single and PECVD a-Si:H + PECVD a-SiOx:H double layers for silicon solar cell rear side passivation
Hofmann, M.; Schmidt, C.; Raabe, B.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2009Thermally activated p- and n-doped passivation layers
Seiffe, J.; Suwito, D.; Korte, L.; Hofmann, M.; Janz, S.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2009Towards a-Si:H rear passivated industrial-type silicon solar cells
Hofmann, M.; Saint-Cast, P.; Bareis, D.; Wagenmann, D.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2009Wet chemical processing for c-Si solar cells - status and perspectives
Rentsch, J.; Ackermann, R.; Birmann, K.; Furtwängler, H.; Haunschild, J.; Kästner, G.; Neubauer, R.; Nievendick, J.; Oltersdorf, A.; Rein, S.; Schütte, A.; Zimmer, M.; Preu, R.
Konferenzbeitrag
2008Analysis of hydrogen passivation by sputtered silicon nitride
Catoir, J.; Wolke, W.; Griesshammer, M.; Preu, R.; Trassl, R.; Grambole, D.
Konferenzbeitrag
2008Detailed analysis of annealing silver front side contacts on silicon solar cells
Kontermann, S.; Grohe, A.; Preu, R.
Konferenzbeitrag
2008Industrial approach for the deposition, through-vias wet opening and firing activation of a backside passivation layer applied on solar cells
Gautero, L.; Rentsch, J.; Weiss, L.; Kohn, N.; Eigner, S.; Zimmer, M.; Specht, J.; Nekarda, J.; Stüwe, D.; Retzlaff, M.; Biro, D.; Sallese, J.-M.; Preu, R.
Konferenzbeitrag
2008Industrial type CZ silicon solar cells with screen-printed fine line front contacts and passivated rear contacted by laser firing
Hofmann, M.; Erath, D.; Bitnar, B.; Gautero, L.; Nekarda, J.; Grohe, A.; Biro, D.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2008Industrially feasible front-side metallization based on ink-jet masking and nickel plating
Aleman, M.; Bay, N.; Gautero, J.; Specht, J.; Stüwe, D.; Neubauer, R.; Baurcha, D.; Biro, D.; Rentsch, J.; Glunz, S.W.; Preu, R.
Konferenzbeitrag
2008Industrially feasible mc-Si metal wrap through (MWT) solar cells with high emitter sheet resistances exceeding 16% efficiency
Clement, F.; Belledin, U.; Wotke, E.; Menkö, M.; Kubera, T.; Hönig, R.; Harmel, C.; Spitz, M.; Wirth, H.; Biro, D.; Preu, R.
Konferenzbeitrag
2008Industrially feasible multi crystalline metal wrap through (mwt) silicon solar cells exceeding 16% efficiency
Clement, F.; Lutsch, M.; Kubera, T.; Wirth, H.; Harmel, C.; Wolke, W.; Biro, D.; Preu, R.
Konferenzbeitrag
2008Investigation of blistering of sputtered silicon nitride anti-reflection layer
Catoir, J.; Wolke, W.; Hartmann, P.; Gernot, E.; Preu, R.; Trassl, R.; Wieder, S.
Konferenzbeitrag
2008Passivation of laser-drilled via holes for emitter-wrap-through-cells
Mingirulli, N.; Trittler, S.; Bui, M.; Grohe, A.; Biro, D.; Preu, R.; Glunz, S.W.
Konferenzbeitrag
2008Plasma cluster processing for advanced solar cell manufacturing
Rentsch, J.; Seiffe, J.; Walter, F.; Hofmann, M.; Weiss, L.; Gautero, L.; Decker, D.; Schlemm, H.; Preu, R.
Konferenzbeitrag
2008Resistance analysis of wrapped through emitters
Mingirulli, N.; Driessen, M.; Grote, D.; Biro, D.; Preu, R.
Konferenzbeitrag
2008Simulation of MWT-solar cells using a multi 2D circuit calculation tool based on spice
Kubera, T.; Clement, F.; Grote, D.; Thaidigsmann, B.; Biro, D.; Warta, W.; Preu, R.
Konferenzbeitrag
2008Single side etching - key technology for industrial high efficiency processing
Rentsch, J.; Gautero, L.; Lemke, A.; Eigner, S.; Zimmer, M.; Walter, F.; Hofmann, M.; Preu, R.
Konferenzbeitrag
2008Single-wafer tracking in PV production lines
Rein, S.; Krieg, A.; Weil, A.; Emanuel, G.; Glatthaar, M.; Grohe, A.; Preu, R.; Sattler, B.; Lorch, P.; Vayhinger, K.
Konferenzbeitrag
2008Solar cell process development in the european integrated project crystalclear
Beaucarne, G.; John, J.; Choulat, P.; Ma, Y.; Russel, R.; Romijn, I.; Weeber, A.; Hofmann, M.; Preu, R.; Slaoui, A.; Quang, N. le; Nichiporuk, O.; Canizo, C. del; Pan, A.; Solheim, H.; Evju, J.; Nagel, H.; Horzel, J.; Bitnar, B.; Heemeier, M.; Weber, T.; Raabe, B.; Haverkamp, H.; Strümpel, C.; Junge, J.; Riegel, S.; Seren, S.; Hahn, G.
Konferenzbeitrag
2008Using hotmelt-inkjet as a structuring method for higher efficiency industrial silicon solar cells
Specht, J.; Biro, D.; Mingirulli, N.; Aleman, M.; Belledin, U.; Efinger, R.; Erath, D.; Gautero, L.; Lemke, A.; Stüwe, D.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2007Aluminum foil as back side metallization for LFC cells
Nekarda, J.-F.; Grohe, A.; Schultz, O.; Preu, R.
Konferenzbeitrag
2007Detailed analysis of amorphous silicon passivation layers deposited in industrial in-line and laboratory-type PECVD reactors
Hofmann, M.; Schmidt, C.; Kohn, N.; Grambole, D.; Rentsch, J.; Glunz, S.W.; Preu, R.
Konferenzbeitrag
2007Firing stable surface passivation using all-PECVD stacks of SiOx:H and SiNx:H
Hofmann, M.; Kambor, S.; Schmidt, C.; Grambole, D.; Rentsch, J.; Glunz, S.W.; Preu, R.
Konferenzbeitrag
2007Industrial realization of dry plasma etching for PSG removal and rear side emitter etching
Rentsch, J.; Decker, D.; Hofmann, M.; Schlemm, H.; Roth, K.; Preu, R.
Konferenzbeitrag
2007Inkjet printing for high definition industrial masking processes for solar cell production
Biro, D.; Erath, D.; Belledin, U.; Specht, J.; Stüwe, D.; Lemke, A.; Aleman, M.; Mingirulli, N.; Rentsch, J.; Preu, R.; Schlosser, R.; Bitnar, B.; Neuhaus, H.
Vortrag
2007Investigations of diffusion barriers for application in back-contacted solar cells
Drießen, M.; Mingirulli, N.; Pingel, S.; Schubert, M.; Biro, D.; Preu, R.
Konferenzbeitrag
2007Investigations on the influence of different annealing steps on silicon solar cells with silver thick film contacts
Kontermann, S.; Grohe, A.; Erath, D.; Preu, R.; Willeke, G.
Konferenzbeitrag
2007Laser processes for the industrial production of high efficiency silicon solar cells
Grohe, A.; Wütherich, T.; Knorz, A.; Nekarda, J.; Mingirulli, N.; Harmel, C.; Preu, R.; Glunz, S.W.
Konferenzbeitrag
2007Lifetime studies on laser drilled vias for application in emitter-wrap-through-solar cells
Mingirulli, N.; Grohe, A.; Dohrn, A.; Hofmann, M.; Schubert, M.; Roth, T.; Biro, D.; Preu, R.
Konferenzbeitrag
2007Mechanisms involved in the formation of phosphosilicate glass by dehydration of sprayed phosphoric acid in an in-line diffusion furnace
Voyer, C.; Biro, D.; Buettner, T.; Preu, R.
Konferenzbeitrag
2007Phosphorus gettering and multi-crystalline silicon solar cells using in-line diffusion and sprayed phosphoric acid as the dopant source
Voyer, C.; Biro, D.; Buettner, T.; Preu, R.
Konferenzbeitrag
2007Pilot-line processing of very large (21 x 21 cm²) and thin mc-Si solar cells
Clement, F.; Preu, R.; Reis, I.E.; Biro, D.; Rentsch, J.; Zimmer, M.; Rein, S.; Emanuel, G.; Krieg, A.; Müller, A.; Martin, F.
Konferenzbeitrag
2007Processing and comprehensive characterisation of screen-printed mc-Si Metal Wrap Through (MWT) solar cells
Clement, F.; Lutsch, M.; Kubera, T.; Kasemann, M.; Kwapil, W.; Harmel, C.; Mingirulli, N.; Erath, D.; Wirth, H.; Biro, D.; Preu, R.
Konferenzbeitrag
2007Progress in selective laser ablation of dielectric layers
Knorz, A.; Grohe, A.; Harmel, C.; Preu, R.; Luther, J.
Konferenzbeitrag
2007Silicon solar cells with screen-printed front side metallization exceeding 19% efficiency
Schultz, O.; Mette, A.; Preu, R.; Glunz, S.W.
Konferenzbeitrag
2007Thermal oxidation and wet chemical cleaning of silicon wafers for industrial solar cell production
Lemke, A.; Furtwängler, H.; Rentsch, J.; Biro, D.; Preu, R.
Konferenzbeitrag
200621%-efficient silicon solar cells using amorphous silicon rear side passivation
Hofmann, M.; Glunz, S.; Preu, R.; Willeke, G.
Konferenzbeitrag
2006Boundary conditions for the industrial production of LFC cells
Grohe, A.; Fleischhauer, B.; Preu, R.; Glunz, S.W.; Willeke, G.P.
Konferenzbeitrag
2006Boundary conditions for the industrial production of LFC cells - Results from the joint project INKA
Grohe, A.; Catoir, J.; Fleischhauer, B.; Preu, R.; Glunz, S.W.; Willeke, G.P.; Schneiderlöchner, E.; Lüdemann, R.; Liu, J.; Schramm, S.; Trassl, R.; Wieder, S.
Konferenzbeitrag
2006Characterisation of silver thick-film contact formation on textured monocrystalline silicon solar cells
Kontermann, S.; Emanuel, G.; Benick, J.; Preu, R.; Willeke, G.
Konferenzbeitrag
2006Fabrication of textured solar cells using sprayed phosphoric acid as the dopant source for the in-line emitter diffusion
Voyer, C.; Biro, D.; Wagner, K.; Benick, J.; Preu, R.
Konferenzbeitrag
2006High efficiencies on large area screen printed silicon solar cells and contacting high sheet resistance emitters using hotmelt ink
Mette, A.; Emanuel, G.; Erath, D.; Preu, R.; Willeke, G.
Konferenzbeitrag
2006High-efficiency solar cells with laser-grooved buried contact front and laser-fired rear for industrial production
Schultz, O.; Glunz, S.W.; Warta, W.; Preu, R.; Grohe, A.; Köber, M.; Willeke, G.P.; Russel, R.; Fernandez, J.; Morilla, C.; Bueno, R.; Vincueria, I.
Konferenzbeitrag
2006Novel low temperature front side metallisation scheme using selective laser ablation of anti reflection coatings and electroless nickel plating
Grohe, A.; Knorz, A.; Aleman, M.; Harmel, C.; Glunz, S.W.; Preu, R.; Willeke, G.P.
Konferenzbeitrag
2006PECVD PSG as a dopant source for industrial solar cells
Benick, J.; Rentsch, J.; Schetter, C.; Voyer, C.; Biro, D.; Preu, R.
Konferenzbeitrag
2006PV-Tec: Photovoltaic technology evaluation center
Biro, D.; Preu, R.; Glunz, S.W.; Rein, S.; Rentsch, J.; Emanuel, G.; Brucker, I.; Faasch, T.; Faller, C.; Willeke, G.; Luther, J.
Konferenzbeitrag
2006Selective laser ablation of anti-reflection coatings for novel metallization techniques
Grohe, A.; Harmel, C.; Knorz, A.; Glunz, S.W.; Preu, R.; Willeke, G.P.
Konferenzbeitrag
2006Successful market entry of applied materials' ATON™ system for sputtered SiN:H
Trassl, R.; Ratschat, H.; Daube, C.; Wieder, S.; Wolke, W.; Preu, R.
Konferenzbeitrag
2006Technology route towards industrial application of rear passivated silicon solar cells
Rentsch, J.; Schultz, O.; Grohe, A.; Biro, D.; Preu, R.; Willeke, G.P.
Konferenzbeitrag
2005Analysis of silver thick-film contact formation on industrial silicon solar cells
Grupp, G.; Biro, D.; Emanuel, G.; Preu, R.; Schitthelm, F.; Willeke, G.
Konferenzbeitrag
2005Comparison of different dielectric passivation layers for application in industrially feasible high-efficiency crystalline silicon solar cells
Glunz, S.W.; Grohe, A.; Hermle, M.; Hofmann, M.; Janz, S.; Roth, T.; Schultz, O.; Vetter, M.; Martin, I.; Ferré, R.; Bermejo, S.; Wolke, W.; Warta, W.; Preu, R.; Willeke, G.
Konferenzbeitrag
2005Determining trade-offs between costs of production and cell/module-efficiency with the concept of indifference curves
Jaus, J.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2005Economical and ecological aspects of plasma processing for industrial solar cell fabrication
Rentsch, J.; Jaus, J.; Roth, K.; Preu, R.
Konferenzbeitrag
2005Experimental investigation towards high throughput rapid thermal firing of EFG SI solar cells
Horzel, J.; Grupp, G.; Preu, R.; Schmidt, W.
Konferenzbeitrag
2005Hot melt ink for the front side metallisation of silicon solar cells
Mette, A.; Erath, D.; Ruiz, R.; Emanuel, G.; Kasper, E.; Preu, R.
Konferenzbeitrag
2005Industrialisation of dry phosphorus silicate glass etching and edge isolation for crystalline silicon solar cells
Rentsch, J.; Schetter, C.; Schlemm, H.; Roth, K.; Preu, R.
Konferenzbeitrag
2005Isotropic plasma texturing of mc-Si for industrial solar cell fabrication
Rentsch, J.; Kohn, N.; Bamberg, F.; Roth, K.; Peters, S.; Lüdemann, R.; Preu, R.
Konferenzbeitrag
2005A large area production technology for solar cells - sputter deposition of SiN:H
Ruske, M.; Liu, J.; Wieder, S.; Preu, R.; Wolke, W.
Konferenzbeitrag
2005Laser soldering - A technology for better contacts?
Schmidhuber, H.; Klappert, S.; Stollhof, J.; Erfurt, G.; Eberspächer, M.; Preu, R.
Konferenzbeitrag
2005Low temperature back contact for high efficiency silicon solar cells
Brendle, W.; Nguyen, V.; Brenner, K.; Rostan, P.J.; Grohe, A.; Schneiderlöchner, E.; Preu, R.; Rau, U.; Palfinger, G.; Werner, J.H.
Konferenzbeitrag
2005Peak firing temperature dependence of the microstructure of Ag thick-film contacts on silicon solar cells - a detailed AFM study of the interface
Grupp, G.; Huljic, D.M.; Preu, R.; Willeke, G.; Luther, J.
Konferenzbeitrag
2005Progress in the characterisation of laser-fired contacts
Grohe, A.; Zastrow, U.; Meertens, D.; Houben, L.; Brendle, W.; Bilger, G.; Schneiderlöchner, E.; Glunz, S.W.; Preu, R.; Willeke, G.
Konferenzbeitrag
2005Progress in the use of sprayed phosphoric acid as an inexpensive dopant source for industrial solar cells
Voyer, C.; Biro, D.; Wagner, K.; Benick, J.; Preu, R.; Koriath, J.; Heintze, M.; Wanka, H.N.
Konferenzbeitrag
2005Status and advancement in transferring the laser-fired contact technology to screen-printed silicon solar cells
Schneiderlöchner, E.; Grohe, A.; Fleischhauer, B.; Hofmann, M.; Glunz, S.W.; Preu, R.; Willeke, G.
Konferenzbeitrag
2005Surface passivation for solar cells by large scale inline sputtering of silicon nitride
Wolke, W.; Catoir, J.; Preu, R.; Emanuel, G.; Liu, J.; Ruske, M.
Konferenzbeitrag
2005Texturing of multicrystalline silicon by laser ablation
Rentsch, J.; Bamberg, F.; Schneiderlöchner, E.; Preu, R.
Konferenzbeitrag
2004Comprehensive study of rapid thermal firing for industrial production of crystalline silicon thick-film solar cells
Huljic, D.M.; Grupp, G.; Horzel, J.; Preu, R.
Konferenzbeitrag
2004Dry phosphorus silicate glass etching for crystalline Si solar cells
Rentsch, J.; Binaie, F.; Schetter, C.; Schlemm, H.; Roth, K.; Theirich, D.; Preu, R.
Konferenzbeitrag
2004Evaluation of dopant sources and deposition methods suitable for in-line diffusion in the PV industry
Voyer, C.; Biro, D.; Emanuel, G.; Preu, R.; Koriath, J.; Wanka, H.
Konferenzbeitrag
2004Inline plasma etching of silicon oxides and nitrides for dry processing in silicon solar cell fabrication
Roth, K.; Rentsch, J.; Binaie, F.; Schetter, C.; Preu, R.; Schlemm, H.
Konferenzbeitrag
2004Innovative and efficient production processes for silicon solar cells and modules - SOLPRO IV
Preu, R.; Emanuel, G.; Untiedt, D.; Klappert, S.; Schmidhuber, H.; Biro, D.; Voyer, C.; Wolke, W.; Schneiderlöchner, E.
Konferenzbeitrag
2004Laser-fired contact silicon solar cells on p- and n-substrates
Glunz, S.W.; Schneiderlöchner, E.; Kray, D.; Grohe, A.; Hermle, M.; Kampwerth, H.; Preu, R.; Willeke, G.
Konferenzbeitrag
2004On the photon-enhanced diffusion of phosphorus in silicon wafers during rapid isothermal processing
Peters, S.; Hickel, P.-E.; Horzel, J.; Noel, S.; Preu, R.
Konferenzbeitrag
2004Plasma etching for industrial in-line processing of c-si solar cells
Rentsch, J.; Emanuel, G.; Schetter, C.; Aumann, T.; Theirich, D.; Gentischer, J.; Roth, K.; Fritzsche, M.; Dittrich, K.-H.; Preu, R.
Vortrag
2004Silicon nitride - silicon oxide stacks for solar cell rear side passivation
Hofmann, M.; Schneiderlöchner, E.; Wolke, W.; Preu, R.
Konferenzbeitrag
2004Silicon solar cells with screen printed-front contact and dielectrically passivated, laser-fired rear electrode
Schneiderlöchner, E.; Emanuel, G.; Grupp, G.; Lautenschlager, H.; Leimenstoll, A.; Glunz, S.W.; Preu, R.; Willeke, G.
Konferenzbeitrag
2004SiN:H anti-reflection coatings for c-Si solar cells by large scale inline sputtering
Wolke, W.; Jäckle, A.; Preu, R.; Wieder, S.; Ruske, M.
Konferenzbeitrag
2004Transport systems for industrial in-line diffusion of silicon solar cells
Biro, D.; Preu, R.; Willeke, G.; Untiedt, D.; Wandel, G.; Gentischer, J.
Konferenzbeitrag
2003Plasma etching for industrial in-line processing of c-Si solar cells
Rentsch, J.; Emanuel, G.; Schetter, C.; Aumann, T.; Theirich, D.; Gentischer, J.; Roth, K.; Fritzsche, M.; Dittrich, K.-H.; Preu, R.
Konferenzbeitrag
2003Technology path to the industrial production of highly efficient and thin c-Si solar cells
Preu, R.; Biro, D.; Emanuel, G.; Grohe, A.; Hofmann, M.; Huljic, D.M.; Reis, I.E.; Rentsch, J.; Schneiderlöchner, E.; Sparber, W.; Wolke, W.; Willeke, G.
Konferenzbeitrag
2002High throughput laser isolation of crystalline silicon solar cells
Emanuel, G.; Schneiderlöchner, E.; Stollhof, J.; Gentischer, J.; Preu, R.; Lüdemann, R.
Konferenzbeitrag
2002High-efficiency silicon solar cells for low-illumination applications
Glunz, S.W.; Dicker, J.; Esterle, M.; Hermle, M.; Isenberg, J.; Kamerewerd, F.; Knobloch, J.; Kray, D.; Leimenstoll, A.; Lutz, F.; Oßwald, D.; Preu, R.; Rein, S.; Schäffer, E.; Schetter, C.; Schmidhuber, H.; Schmidt, H.; Steuder, M.; Vorgrimler, C.; Willeke, G.
Konferenzbeitrag
2002Innovation in solar cell production technology
Lüdemann, R.; Preu, R.; Willeke, G.
Konferenzbeitrag
2002Laser-fired contacts - transfer of a simple high efficiency process scheme to industrial production
Preu, R.; Schneiderlöchner, E.; Grohe, A.; Glunz, S.W.; Willeke, G.
Konferenzbeitrag
2002Pad printed front contacts for c-Si solar cells - a technological and economical evaluation
Huljic, D.M.; Thormann, S.; Preu, R.; Lüdemann, R.; Willeke, G.
Konferenzbeitrag
2002Progress in screen printed front side metallization schemes for CSiTF solar cells
Rentsch, J.; Huljic, D.M.; Reber, S.; Preu, R.; Lüdemann, R.
Konferenzbeitrag
2002Screen printed selective emitters prepared by fast and rapid thermal diffusion
Biro, D.; Schultz, O.; Preu, R.; Ballif, C.; Zickermann, D.; Lüdemann, R.
Konferenzbeitrag
2000Innovative production technologies for solar cells - SOLPRO
Preu, R.; Lüdemann, R.; Emanuel, G.; Wettling, W.; Eversheim, W.; Güthenke, G.; Untiedt, D.; Schweitzer, G.
Konferenzbeitrag
2000Rapid thermal firing of screen printed contacts for large area crystalline silicon solar cells
Huljic, D.M.; Biro, D.; Preu, R.; Craff-Castillo, C.; Lüdemann, R.
Konferenzbeitrag
2000Sputtering - a key technology for thin film deposition in crystalline silicon solar cell production?
Preu, R.; Krempel-Hesse, J.; Biro, D.; Huljic, D.M.; Mäckel, H.; Lüdemann, R.
Konferenzbeitrag
1998Pad printing - a novel thick-film technique of fine-line printing for solar cells
Hahne, P.; Reis, I.E.; Hirth, E.; Huljic, D.M.; Preu, R.
Konferenzbeitrag
1997Optimisation of cell interconnectors for PV module performance enhancement
Preu, R.; Koltay, P.; Schmidhuber, H.; Bücher, K.
Konferenzbeitrag