Fraunhofer-Publica

: 70

2021Some Industrial Examples of Accelerated Curing Using Curie Particles
Elmahdy, Ahmed; Weyenberg, Isabel van de; Cosemans, Patrick; Adam, Michael; Voß, Morten; Heinrichs, Sascha; Vallée, Till
Conference Paper
2020Accelerated curing of G-FRP rods glued into timber by means of inductive heating using Curie-particles - large-scale experiments at room temperature
Voß, Morten; Vallée, Till
Journal Article
2020Adsorptive Coatings based on Siloxane Binders for Heat Transformation Applications
Kummer, Harry
Dissertation
2020Analyse von Schwindungsfeldern bei planaren LTCC-Substraten und deren Berücksichtigung im Entwurf von mikrosystemtechnischen Komponenten
Lenz, Christian
: Michaelis, Alexander
Dissertation
2020Automated 3D Skeleton Winding Process for Continuous-Fiber-Reinforcements in Structural Thermoplastic Components
Beck, Björn; Tawfik, H.; Haas, J.; Park, Y.-B.; Henning, Frank
Conference Paper
2020Avoiding Voltage-Induced Degradation in PET-ITO-Based Flexible Electrochromic Devices
Macher, Sven; Rumpel, Matthias; Schott, Marco; Posset, Uwe; Giffin, Guinevere A.; Löbmann, Peer
Journal Article
2020Breakthrough Screening of Porous Materials: A Simple and Effective Tool for Database Generation
Piscopo, Calogero Giancarlo; Polyzoidis, Angelos; Werner, David; Ahlhelm, Matthias; Richter, Hans-Jürgen
Journal Article
2020Charakterisierung und Berechnung des Versagensverhaltens von Strukturklebungen mit gemischt faserverstärkten Kunststoffen
Roos, Cecil; Hesebeck, Olaf; Carrillo Beber, Vinicius
: Athar, Muhammad Anas; Blass, David; Deshpande, Prathamesh; Fladung, Thorsten; Gomm, Michael; Mogalle, Christian; Siddiqui, Owais; Siefken, Helge; Stammen, Elisabeth; Taralagetti, Sanjana; Uday, Jayanth; Vishwanath, Srilakshmi; Wolters, Nick
Report
2020COVID-19 and the endothelium
Jung, Friedrich; Krüger-Genge, Anne; Franke, Ralf-Peter; Hufert, Frank; Küpper, J.-H.
Journal Article
2020Decomposition Pathways of Ammonium Dinitramide (ADN) and its HNO3-Clusters Elucidated by DFT-Calculations
Lang, Johannes; Bohn, Manfred
Journal Article
2020Defect Shape Detection and Defect Reconstruction in Active Thermography by means of Two-Dimensional Convolutional Neural Network as well as Spatiotemporal Convolutional LSTM Network
Müller, David; Netzelmann, Udo; Valeske, Bernd
Journal Article
2020Does vaping affect indoor air quality?
Destaillats, Hugo; Singer, Brett; Salthammer, Tunga
Journal Article
2020Domänenübergreifende Workflows zur effizienten Entwicklung Programmierbarer Materialien
Weisheit, Linda; Wenz, Franziska; Lichti, Tobias; Eckert, Medardus; Baumann, Sascha; Hübner, Christof; Eberl, Christoph; Andrä, Heiko
Journal Article
2020Effect of bearing length on web crippling behavior of pultruded GFRP channel section
Wu, Chao; Zhang, Li-Teng; Tam, Lik-ho; Yan, Libo; He, Li
Journal Article
2020Effects of crosslink density in zwitterionic hydrogel coatings on their antifouling performance and susceptibility to silt uptake
Koc, Julian; Schönemann, Eric; Wanka, Robin; Aldred, Nick; Clare, Anthony S.; Gardner, Harrison; Swain, Geoffrey W.; Hunsucker, Kelli; Laschewsky, Andre; Rosenhahn, Axel
Journal Article
2020End-of-life options for bio-based plastics in a circular economy
Spierling, Sebastian; Venkatachalam, Venkateshwaran; Mudersbach, Marina; Becker, Nico; Herrmann, Christoph; Endres, Hans-Josef
Journal Article
2020Endurance Test Strategies for Pitch Bearings of Wind Turbines
Stammler, Matthias
Dissertation
2020Entwicklung eines Programms zur automatisierten energetischen und wirtschaftlichen Bewertung unterschiedlicher Wärmeversorgungsvarianten für ein Neubaugebiet
Höhn, Alexander
Bachelor Thesis
2020Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit. Jahresbericht 2019
 
Annual Report
2020Fraunhofer-Institut für Werkstoffmechanik. Jahresbericht 2019
 
Annual Report
2020Fraunhofer-Institut für Zerstörungsfreie Prüfverfahren. Jahresbericht 2019
 
Annual Report
2020How to combine 3D textile modeling with latest FE human body models
Klein, Hartmut; Jenerowicz, Marcin; Trube, Niclas; Boljen, Matthias
Conference Paper
2020Hydrogen effects in X30MnCrN16-14 austenitic steel
Michler, T.; Bruder, E.; Lindner, S.
Journal Article
2020The impact of Sahara dust on air quality and public health in European countries
Wang, Qiaoqiao; Gu, Jianwei; Wang, Xurong
Journal Article
2020Influence of interstitial oxygen on the tribology of Ti6Al4V
Kümmel, D.; Schneider, J.; Gumbsch, P.
Journal Article
2020Innovative Diagnosemethoden zum Nachweis holzzerstörender Insekten
Becker, Matthias; Berger, Beatrice; König, Stephan; Taddei, Andrea; Hoppe, Björn; Plinke, Burkhard
Journal Article
2020Konzeption zur Berücksichtigung von Grenzkosten in der Direktvermarktung zur wirtschaftlichen Optimierung der Betriebsführung von Windenergieanlagen
Beyer, Jan Niclas
Master Thesis
2020Lessons Learnt from Innovative but a not Realised Project on Geo-Solar District Heating
Schmidt, Dietrich; Orozaliev, Janybek
Abstract
2020Mechanical behaviors of CFRP-confined sustainable geopolymeric recycled aggregate concrete under both static and cyclic compressions
Tang, Zhuo; Li, Wengui; Tam, Vivian W.Y.; Yan, Libo
Journal Article
2020Mechanical metamaterials on the way from laboratory scale to industrial applications: Challenges for characterization and scalability
Fischer, Sarah C.L.; Hillen, Leonie; Eberl, Chris
Journal Article
2020Membranes for zinc-air batteries: Recent progress, challenges and perspectives
Tsehaye, Misgina Tilahun; Alloin, Fannie; Iojoiu, Cristina; Tufa, Ramato Ashu; Aili, David; Fischer, Peter; Velizarov, Svetlozar G.
Journal Article
2020Metal-Organic Framework-Based Catalysts for Oxidative Desulfurization
Piscopo, Calogero Giancarlo; Granadeiro, Carlos M.C.E.; Balula, Salete S.; Bošković, Dušan
Journal Article
2020Microstructural investigations in binderless tungsten carbide with grain growth inhibitors
Lay, Sabine; Antoni-Zdziobek, Annie; Pötschke, Johannes; Herrmann, Mathias
Journal Article
2020N-phosphorylated Iminophosphoranes based on 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide and their flame-retardant behavior in epoxy resins
Weinert, Michael; Döring, Manfred
Journal Article
2020New Algorithm Based on S-Transform to Increase Defect Resolution Within Ultrasonic Images
Benyahia, Ahmed; Osman, Ahmad; Benammer, Abdessalem; Guessoum, Abderrezak
Conference Paper
2020A numerical study on pedestrian and wheelchair user safety in VRU-vehicle collisions
Trube, Niclas; Matt, Patrick; Boljen, Matthias
Conference Paper
2020Optimierung von korrelationsbasierten Verfahren zur Ultraschalllaufzeitmessung in Hinblick auf Störanfalligkeit und Mehrdeutigkeiten in der Signalauswertung durch Einsatz von "Coded Excitation"
Schäfer, Marius
: Buchholz, Martin (Betreuer); Valeske, Bernd (Betreuer); Theado, Hendrik (Day-to-Day-Supervisor)
Master Thesis
2020PDMS-urethanesil hybrid multifunctional materials: Combining CO2 use and sol-gel processing
Günther, Florian; Lima, Elton F.S.; Rossi De Aguiar, Kelen M.F.; Bearzi, Jefferson R.; Simões, Mateus B.; Schneider, Ricardo; Bini, Rafael A.; Ribeiro, Sidney J.L.; Wong Chi Man, Michel; Rischka, Klaus; Aguiar, Flavio H.B.; Pereira, Renata; Carmo A.J. Mainardi, Maria do; Rocha, Marina C.; Malavazi, Iran; Passeti, Tania A.; Santos, Marcio L.; Imasato, Hidetake; Rodrigues Filho, Ubirajara Pereira
Journal Article, Conference Paper
2020Process Chain Optimization for SWCNT/Epoxy Nanocomposite Parts with Improved Electrical Properties
Morais, Manuel V.C.; Marcellan, Marco; Sohn, Nadine; Hübner, Christof; Henning, Frank
Journal Article
2020Prozessintegrierte Materialprüfung im Zeichen der Digitalisierung
Koster, Dirk
Journal Article
2020Recycled polyethylene bottle caps as sandwich panel circular honeycomb: Experimental and numerical approach
Jesus, Murilo Monteiro de; Gato, Lucas Braga Lopes; Oliveira, Pablo Resende; Filho, Sergio Luiz Moni Ribeiro; Tonatto, Maikson Luiz Passaia; Panzera, Tulio Hallak; Scarpa, Fabrizio
Journal Article
2020Reliable computational prediction of the supramolecular ordering of complex molecules under electrochemical conditions
Hartl, B.; Sharma, S.; Brügner, O.; Mertens, S.F.L.; Walter, M.; Kahl, G.
Journal Article
2020Residual stress relaxation in HFMI-treated fillet welds after single overload peaks
Schubnell, J.; Carl, E.; Farajian, M.; Gkatzogiannis, S.; Knödel, P.; Ummenhofer, T.; Wimpory, R.; Eslami, H.
Journal Article
2020Risk and resilience assessment and improvement in the telecommunication industry
Fehling-Kaschek, Mirjam; Miller, Natalie; Haab, Gael; Faist, Katja; Stolz, Alexander; Häring, Ivo; Neri, Alberto; Celozzi, Giuseppe; Sanchez, Jose; Valera, Javier; Makri, Rodoula
Conference Paper
2020Shape Memory Polymer Foam with Programmable Apertures
Walter, Mario; Friess, Fabian; Krus, Martin; Hassan Zolanvari, Seyed Mohammad; Grün, Gunnar; Kröber, Hartmut; Pretsch, Thorsten
Journal Article
2020Simulation based analysis of low temperature district heating system concepts for a planned new housing development in Neuburg
Holway, Stephen
: Yu, Young Jae (Betreuer)
Master Thesis
2020Simulation-Based Generation of Representative and Valid Training Data for Acoustic Resonance Testing
Heinrich, Matthias; Rabe, Ute; Valeske, Bernd
Journal Article
2020A Smoothed Particle Hydrodynamics scheme for arbitrarily shaped rigid bodies within highly viscous fluids
Dietemann, B.; Kraft, T.; Kruggel-Emden, H.; Bierwisch, C.
Journal Article
2020Temperature-Dependent Phase Behavior of the Thermoresponsive Polymer Poly(N-isopropylmethacrylamide) in an Aqueous Solution
Ko, Solution Chia-Hsin; Claude, Kora-Lee; Niebuur, Bart-Jan; Jung, Florian A.; Kang, Jia-Jhen; Schanzenbach, Dirk; Frielinghaus, Henrich; Barnsley, Lester C.; Wu, Baohu; Pipich, Vitaliy; Schulte, Alfons; Müller-Buschbaum, Peter; Laschewsky, Andre; Papadakis, Christine M.
Journal Article
2020Towards simulation of dynamic risk-based border crossing checkpoints
Jain, Aishvarya Kumar; Satsrisakul, Yupak; Fehling-Kaschek, Mirjam; Häring, Ivo; Rest, Jeroen van
Conference Paper
2020Unsicherheitsuntersuchung von Kennzahlen zur Performance-Analyse von Windenergieanlagen
Backhaus, Karsten
: Pfaffel, Sebastian (Betreuer)
Master Thesis
2020Wind-Ausschreibung ohne Preisvorteil oder Wettbewerb - wie weiter?
Grashof, Katherina; Berkhout, Volker; Cernusko, Robert
Journal Article
2019Additive Fertigung von verschleißbeständigen Werkstoffen
Jurisch, M.; Klöden, B.; Weißgärber, T.; Kieback, B.; Kluge, P.; Boes, J.
Conference Paper
2019Aluminum mixed metal welding applications joint by magnetic pulse welding, MPW
Huberth, F.; Klitschke, S.; Sommer, S.; Ragupathi, B.; Baumgartner, J.
Conference Paper
2019Application of hot isostatic pressing (HIP) technology to diffusion bond refractory metals for proton beam targets and absorbers at CERN
Hutsch, T.; Weißgärber, T.; Sgobba, S.; Descarrega, J.B.; Calviani, M.; López Sola, E.; Pérez Fontenla, A.T.; Perillo Marcone, A.
Journal Article
2019Fortschrittliche Metallhydrid-Werkstoffe für die Wasserstofftechnologie
Weißgärber, T.; Röntzsch, L.; Mauermann, S.; Heubner, F.; Kieback, B.
Conference Paper
2019Heat Exchange Structures Based on Copper/CNT Composite
Schlott, A.; Hutsch, T.; Hampel, S.; Lohse, J.; Weißgärber, T.; Kieback, B.
Conference Paper
2019The influence of weld imperfections on fatigue strength and the current relevant design guidelines
Farajian, M.; Tempel, P.; Siegele, D.; Keitel, S.; Wagner, S.; Fenzl, R.
Journal Article
2019Investigations on a hybrid element with cellular metallic material for heating, cooling and ventilation
Schinke, L.; Schlott, A.; Beyer, M.; Seifert, J.; Fink, M.
Conference Paper
2019Konzeption und Programmierung eines Frameworks für Verifikationsverfahren für Windenergie und Photovoltaik
Schönborn, Alexander
Bachelor Thesis
2019Lastverschiebungspotentiale von Gebäuden für Strom aus erneuerbaren Energien
Dittmer, Holger; Krause, Michael; Eymer, Kerstin; Wolf, Matthias; Leonhardt, Corinna; Schwarz, Wolfgang; König, Immanuel
Report
2019Manufacturing of fiber reinforced polybenzoxazine with advanced fire, smoke and toxicity properties
Wolter, Nick; Haubold, Thorben; Beber, Vinicius C.; Faßbender, Fabian J.; Sandinge, Anna; Blomqvist, Per; Koschek, Katharina
Poster
2019Potential Analysis for the Monetary Based Maintenance Optimization of Wind Turbines
Yalcinkaya, Mehmet Alp
Master Thesis
2019Powders for powder bed fusion: a review
Weißgärber, T.; Kieback, B.; Klöden, B.; Kirchner, A.; Vock, S.
Journal Article
2019Precipitation hardening of Cantor alloy containing titanium
Gaitzsch, U.; Eißmann, N.; Mühle, U.; Weißgärber, T.; Kieback, B.
Conference Paper
2019Schwingungsdämpfung für partikelgefüllte Hohlkugeln
Jehring, U.
Dissertation
2019Sintered Connection – A Steel/CFRP Connection Module
Hutsch, T.; Weißgärber, T.; Marx, A.; Schiebel, P.; Feltin, D.; Hoffmeister, F.; Babbel, A.; Hermann, A.
Conference Paper
2019SYSTEMKONTEXT: Modellbildung für nationale Energieversorgungsstrukturen im europäischen Kontext unter besonderer Berücksichtigung der Zulässigkeit von Vereinfachungen und Aggregationen
Böttger, Diana; Dreher, Alexander; Ganal, Irina; Gauglitz, Philip; Geiger, David; Gerlach, Ann-Katrin; Gerhardt, Norman; Harms, Yannic; Härtel, Philipp; Jentsch, Mareike; Knorr, Kasper; Mende, Denis; Pfennig, Maximilian; Schmitz, Richard; Stappel, Mirjam; Bonin, Michael von
Report
2019Thermo-electro-mechanical modeling, simulation and experiments of field-assisted sintering
Semenov, A. S.; Trapp, J.; Nöthe, M.; Eberhardt, O.; Wallmersperger, T.; Kieback, B.
Journal Article
2019X-ray characterization of morphology and structure of materials at multiple length scales
Zschech, Ehrenfried
Abstract