Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2018Investigation of droplet deposition for suspensions usable for Thermoplastic 3D Printing (T3DP)
Scheithauer, Uwe; Johne-Michaelis, Robert; Weingarten, Steven; Schwarzer, Eric; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander
Zeitschriftenaufsatz
2018Sub-surface assessment of hydrothermal ageing in zirconia-containing femoral heads for hip joint applications
Grémillard, Laurent; Chêvalier, Jérôme; Martin, Laura; Douillard, Thierry; Begand, Sabine; Hans, K.; Oberbach, Thomas
Zeitschriftenaufsatz
2017Ceramic-based 4D components: Additive Manufacturing (AM) of ceramic-based functionally graded materials (FGM) by thermoplastic 3D printing (T3DP)
Scheithauer, Uwe; Weingarten, Steven; Johne, Robert; Schwarzer, Eric; Abel, Johannes; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander
Zeitschriftenaufsatz
2017FAST/Flash: A combination of FAST/SPS and flash sintering
Räthel, Jan; Herrmann, Mathias; Hennicke, Jürgen; Kirchner, René
Vortrag
2016Ceramic and metal-ceramic components with graded microstructure
Scheithauer, Uwe; Schwarzer, Eric; Otto, Christian; Slawik, Tim; Moritz, Tassilo; Michaelis, Alexander
Konferenzbeitrag
2016On the feasibility of the Chevron Notch Beam method to measure fracture toughness of fine-grained zirconia ceramics
Kailer, A.; Stephan, M.
Zeitschriftenaufsatz
2016On the strength and failure of an electrolyte supported solid oxide fuel cell
Fleischhauer, Felix
: Danzer, Robert (Betreuer); Michaelis, Alexander (Gutachter)
Dissertation
2015Comparison of the high-temperature corrosion of aluminium nitride, alumina, magnesia and zirconia ceramics by coal ashes
Himpel, Gert; Herrmann, Mathias; Höhn, Sören
Zeitschriftenaufsatz
2015Hierarchical Structure Formation of Nanoparticulate Spray-Dried Composite Aggregates
Zellmer, S.; Garnweitner, G.; Breinlinger, T.; Kraft, T.; Schilde, C.
Zeitschriftenaufsatz
2013Micro-EDM milling of electrically nonconducting zirconia ceramics
Schubert, Andreas; Zeidler, Henning; Hahn, M.; Hackert-Oschätzchen, Matthias; Schneider, Jörg
Konferenzbeitrag, Zeitschriftenaufsatz
2013Osteoblast and bone tissue response to surface modified zirconia and titanium implant materials
Kohal, R.J.; Bächle, M.; Att, W.; Chaar, S.; Altmann, B.; Renz, A.; Butz, F.
Zeitschriftenaufsatz
2012High rate deposition of mixed oxides by controlled reactive magnetron-sputtering from metallic targets
Bruns, S.; Vergöhl, M.; Werner, O.; Wallendorf, T.
Zeitschriftenaufsatz, Konferenzbeitrag
2012Processing of nanostructured zirconia composite ceramics with high aging resistance
Johannes, M.; Schneider, J.
Zeitschriftenaufsatz
2012Strength enhanced bioactive hydroxyapatite freeze-foams
Ahlhelm, Matthias; Gorjup, Erwin; Briesen, H. von; Moritz, Tassilo
Poster
2010High rate deposition of mixed oxides by controlled reactive magnetron-sputtering from metallic targets
Bruns, S.; Vergöhl, M.; Werner, O.; Wallendorf, T.
Konferenzbeitrag
2007Development of dense, fine-grained bulk ceramics from nanosized zirconia powder using pressing technologies
Moritz, T.; Nebelung, M.; Oswald, M.
Zeitschriftenaufsatz
2006Electrophoretic deposition applied to ceramic dental crowns and bridges
Moritz, T.; Eiselt, W.; Moritz, K.
Zeitschriftenaufsatz
2006Freeze casting of ceramic components using ice cores and ice moulds
Moritz, T.; Richter, H.-J.
Konferenzbeitrag
2002Sol-gel deposition processes of thin ceramic films
Sporn, D.; Lobmann, P.; Guntow, U.; Glaubitt, W.
Konferenzbeitrag
2001PLD of hard ceramic coatings
Perera, Y.; Gottmann, J.; Husmann, A.; Klotzbücher, T.; Kreutz, E.W.; Poprawe, R.
Konferenzbeitrag
1998Optical properties of alumina and zirconia thin films grown by pulsed laser deposition
Gottmann, J.; Husmann, A.; Klotzbücher, T.; Kreutz, E.W.
Zeitschriftenaufsatz
1997Hochtemperaturresistenz keramischer Wärmebarrieren
Thurn, G.; Kirchhoff, G.; Bahr, H.-A.; Oechsner, M.; Schneider, G.A.; Bast, U.; Löbel, G.; Baatz, M.
Konferenzbeitrag
1996Effects of grain size and humidity on fretting wear in fine-grained alumina, Al2O3/TiC, and zirconia
Krell, A.; Klaffke, D.
Zeitschriftenaufsatz
1996Schädigung von Wärmedämmschichten durch Thermozyklierung
Kirchhoff, G.; Langmeier, P.; Weiß, H.-J.
Konferenzbeitrag
1995The differnt roles of substoichiometry and transient liquid phase on sintering of ZrO2/TiC with TiH2
Krell, A.; Blank, P.
Konferenzbeitrag
1995Sintering ZrO2/TiC composites with TiH2. The role of transient liquid phase and of substoichiometry
Krell, A.; Blank, P.; Pippel, E.; Woltersdorf, J.
Zeitschriftenaufsatz
1995Weight loss of alumina and zirconia targets during PLD
Aden, M.; Kreutz, E.W.; Voss, A.
Zeitschriftenaufsatz
1994Prototyping in der Ingenieurkeramik - Randbedingungen und Realisierung
Schubert, C.; Richter, C.
Konferenzbeitrag
1993Al2O3 and ZrO2 composites with high TiC contents fabricated by tailoring oxide powders.
Krell, A.; Blank, P.
Aufsatz in Buch
1991Influence of grinding on near-surface regions of high-strength ceramics. Characterization by X-ray diffraction and effect on strength.
Pfeiffer, W.
Aufsatz in Buch
1990Reliability of interfaces in newly designed ceramic-ceramic and metal-ceramic systems
Schönholz, R.; Kleer, G.; Döll, W.
Buch