Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Surface structuring by laser remelting of 1.2379 (D2) for cold forging tools in automotive applications
Temmler, André; Comiotto, Mirco; Roß, Ingo; Küpper, Moritz; Liu, Dan M.; Poprawe, Reinhart
2018Influence of processing parameters on surface texture homogeneity using direct laser interference patterning
Aguilar Morales, Alfredo Ismael; Alamri, Sabri; Kunze, Tim; Lasagni, Andrés-Fabián
2017Quantitative characterization of surface topography using spectral analysis
Jacobs, T; Junge, T.; Pastewka, L.
2016Evaluation of alumina toughened zirconia implants with a sintered, moderately rough surface: An experiment in the rat
Kohal, R.J.; Bächle, M.; Renz, A.; Butz, F.
2015Influence of growth temperature on the defect density for 4H-SiC homoepitaxy
Kaminzky, Daniel; Roßhirt, Katharina; Kallinger, Birgit; Berwian, Patrick; Friedrich, Jochen
2013Osteoblast and bone tissue response to surface modified zirconia and titanium implant materials
Kohal, R.J.; Bächle, M.; Att, W.; Chaar, S.; Altmann, B.; Renz, A.; Butz, F.
2002MOVPE-based in-situ etching of InP epitaxial heterostructures
Wolfram, P.; Franke, D.; Ebert, W.; Grote, N.
2002Surface characterization techniques for determining the root-mean-square roughness and power spectral densities of optical components
Duparre, A.; Ferre-Borrull, J.; Gliech, S.; Notni, G.; Steinert, J.; Bennett, J.M.
2001Gesicherte Interpretationen der FTIR-Reflexionsspektren SiC-CVD-Schichten durch Spektrensimulation
Grählert, W.; Hopfe, V.
1999AFM and STM investigation of carbon nanotubes produced by high energy ion irradiation of graphite
Biro, L.P.; Mark, G.I.; Gyulai, J.; Havancszak, K.; Lipp, S.; Lehrer, C.; Frey, L.; Ryssel, H.
1999Modeling of edge roughness in ion projection lithography
Henke, W.; Torkler, M.
Zeitschriftenaufsatz, Konferenzbeitrag
1998Low cost bumping by stencil printing. Process qualification for 200 mu m pitch
Klöser, J.; Heinricht, K.; Jung, E.; Lauter, L.; Ostmann, A.; Aschenbrenner, R.; Reichl, H.
1997Bondability of electroless metalfinishes for COB-technology
Ansorge, F.; Bader, V.; Zakel, E.; Reichl, H.
1997Micro-optic fabrication using one-level gray-tone lithography
Reimer, K.; Quenzer, H.J.; Jürss, M.; Wagner, B.
1997Titanium monophosphide (TiP) layers as potential diffusion barriers
Leutenecker, R.; Fröschle, B.; Ramm, P.
1996Investigation of macroscopic uniformity during CH4/H2 reactive ion etching of InP and improvement using a guard ring
Janiak, K.; Niggebrugge, U.
1996MOMBE selective infill growth of InP:Si and InGaAs:Si and large area MOMBE regrowth
Schelhase, S.; Boettcher, J.; Gibis, R.; Kuenzel, H.; Paraskevopoulos, A.
Konferenzbeitrag, Zeitschriftenaufsatz
1995Application of smoothing techniques to relief-type resist surfaces generated by direct write electron-beam lithography
Engel, H.; Wengelink, J.; Steingrüber, R.
1995Semitransparent mask technique for relief type surface topographies
Wengelink, J.; Engel, H.; Döldissen, W.
Konferenzbeitrag, Zeitschriftenaufsatz
1994In situ native oxide removal from AlGaInAs surfaces by hydrogen radical treatment for molecular beam epitaxy regrowth
Hase, A.; Gibis, A.R.; Kunzel, H.; Griebenow, U.
1988Thermal degradation effects in InP
Sartorius, B.; Schlak, M.; Rosenzweig, M.; Parschke, K.