Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Impact of sintering temperature on permeation and long-term development of support structure and stability for asymmetric oxygen transporting BSCF membranes
Hoffmann, Robert; Pippardt, Ute; Kriegel, Ralf
Zeitschriftenaufsatz
2019The influence on sintering and properties of sodium niobate (NaNbO3) ceramics by "non-stoichiometric" precursor compositions
Ruf, Thomas; Mauck, Markus; Megnin, Christof; Winkler, Markus; Hillebrecht, Harald; Hanemann, Thomas
Zeitschriftenaufsatz
2019Interaction of fiber matrix bonding in SiC/SiC ceramic matrix composites
Schönfeld, Katrin; Klemm, Hagen
Zeitschriftenaufsatz
2018Additive Manufacturing of Stainless Steel/Zirconia Ceramic Composite Parts by FusedFilament Fabrication and Sintering
Godlinski, Dirk; Müller, Y.; Hein, Sebastian Boris
Konferenzbeitrag
2018Applicability of photonic sintering and autoclaving as alternative contact formation methods for silicon solar cells with passivating contacts
Schube, J.; Fellmeth, T.; Maier, F.; Keding, R.; Clement, F.; Glunz, S.W.
Konferenzbeitrag
2018A continuum model for sintering processes incorporating elasticity effects
Stark, Sebastian; Neumeister, Peter
Zeitschriftenaufsatz
2018Power Interconnect Trends - Cost Savings for PCB Power Electronics by Enabling Wear Out
Schletz, Andreas
Vortrag
2018Studying the progress of sintering in ferrous powder compacts by in-situ measuring the thermal conductivity
Danninger, Herbert; Leitner, Gert; Gierl-Mayer, Christian
Zeitschriftenaufsatz
2018Thermal behaviour of cermets and hardmetals during debinding and sintering
Gestrich, Tim; Kaiser, Arno; Pötschke, Johannes; Meinl, Juliane; Höhn, Sören
Zeitschriftenaufsatz
2017Highest UV-vis transparency of MgAl2O4 spinel ceramics prepared by hot pressing with LiF
Wätzig, Katja; Hutzler, Thomas
Zeitschriftenaufsatz
2017Implementierung eines Sintermodells in ANSYS
Stark, Sebastian; Neumeister, Peter
Vortrag
2017Laser-based functionalization of electronic multi-material-layers for embedded sensors
Vedder, Christian; Wollgarten, Susanne; Gradmann, Rena; Stollenwerk, Jochen Hugo; Wissenbach, Konrad; Eberstein, Markus
Zeitschriftenaufsatz
2017Microstructural evolution during sintering of cermets studied using interrupted sintering experiments and novel 2D and 3D FESEM based techniques
Pötschke, Johannes; Höhn, Sören; Richter, Volkmar; Mayer, Markus
Zeitschriftenaufsatz
2017Pressureless sintering of ZrC with variable stoichiometry
Schönfeld, Katrin; Martin, Hans-Peter; Michaelis, Alexander
Zeitschriftenaufsatz
2016The effect of sodium on the structure-activity relationships of cobalt-modified Cu/ZnO/Al2O3 catalysts applied in the hydrogenation of carbon monoxide to higher alcohols
Anton, Johan; Nebel, Janine; Song, Huiqing; Froese, Christian; Weide, Philipp; Ruland, Holger; Muhler, Martin; Kaluza, Stefan
Zeitschriftenaufsatz
2016Formation of secondary borides in liquid phase-sintered B6O materials
Thiele, Maik; Herrmann, Mathias; Müller, Christin; Michaelis, Alexander
Zeitschriftenaufsatz
2015Fundamentals of sintering nanoscaled binderless hardmetals
Pötschke, Johannes; Richter, Volkmar; Michaelis, Alexander
Zeitschriftenaufsatz, Konferenzbeitrag
2014Grain growth during sintering of tungsten carbide ceramics
Poetschke, Johannes; Richter, Volkmar; Gestrich, Tim; Michaelis, Alexander
Zeitschriftenaufsatz
2014Nanometallic silver inks for metallization of ITO-coated silicon solar cells. Influence of organic components
Gautrein, A.; Schmiga, C.; Glatthaar, M.; Tremel, W.; Glunz, S.W.
Konferenzbeitrag
2014Non-destructive evaluation of 3D microstructure evolution during sintering of strontium titanate
Gumbsch, P.; Syha, M.; Lödermann, B.; Trenkle, A.; Graff, A.
Konferenzbeitrag, Zeitschriftenaufsatz
2013Anisotropy and inhomogeneity measurement of the transport properties of spark plasma sintered thermoelectric materials
Jacquot, A.; Rull, M.; Moure, A.; Fernandez-Lozano, J.F.; Martin-Gonzalez, M.; Saleemi, M.; Toprak, M.S.; Muhammed, M.; Jaegle, M.
Konferenzbeitrag
2013Comparative study of the sintering kinetic of alumina by kinetic field of response, master curve and thermokinetic
Neher, R.; Gestrich, T.; Klimke, J.; Herrmann, M.
Zeitschriftenaufsatz
2013Correlation between microstructure and electrical resistivity of hexagonal boron nitride ceramics
Steinborn, C.; Herrmann, M.; Keitel, U.; Schönecker, A.; Räthel, J.; Rafaja, D.; Eichler, J.
Zeitschriftenaufsatz
2013Development of thermal spray coating solution for ceramic substrates
Toma, Filofteia-Laura; Berger, Lutz-Michael; Hoffmann, Thomas; Scheitz, Stefan; Thiele, Sven; Fries, Manfred
Konferenzbeitrag
2013Discrete element method sintering simulation
Wonisch, A.; Rasp, T.; Kraft, T.; Riedel, H.
Aufsatz in Buch
2013Discrete element study on the influence of initial coordination numbers on sintering behaviour
Rasp, T.; Kraft, T.; Riedel, H.
Zeitschriftenaufsatz
2013FAST/SPS - principle, possibilities and applications
Räthel, Jan; Herrmann, Mathias; Beckert, Wieland; Schöne, Jakob
Vortrag
2013Influences of cation disorder in commercial spinel powders studied by 27Al MAS NMR on the sintering of transparent MgAl2O4 ceramics
Krell, Andreas; Brendler, Erica
Zeitschriftenaufsatz
2013Investigation of binderless WC-TiC-Cr3C2 hard materials prepared by spark plasma sintering (SPS)
Qiao, Z.; Räthel, J.; Berger, L.-M.; Herrmann, M.
Zeitschriftenaufsatz
2013Liquid phase formation in the system AlN-Al2O3-Y2O3. Pt.I: Experimental investigations
Neher, R.; Herrmann, M.; Fabrichnaya, O.; Pavlyuchkov, D.; Seifert, H.J.
Zeitschriftenaufsatz
2013Three dimensional X-ray diffraction contrast tomography reconstruction of polycrystalline strontium titanate during sintering and electron backscatter diffraction validation
Syha, M.; Reinheimer, W.; Loedermann, B.; Graff, A.; Trenkle, A.; Baeuer, M.; Weygand, D.; Ludwig, W.; Gumbsch, P.
Konferenzbeitrag
2012Densification and properties of superhard B6O materials with cobalt additions
Johnson, O.T.; Sigalas, I.; Herrmann, M.; Kleebe, H.J.
Zeitschriftenaufsatz
2012Diamond-ceramics composites - New materials for a wide range of challenging applications
Herrmann, M.; Matthey, B.; Höhn, S.; Kinski, I.; Rafaja, D.; Michaelis, A.
Zeitschriftenaufsatz
2012FAST/SPS temperature distribution during heating ramp
Räthel, J.; Beckert, W.; Herrmann, M.
Vortrag
2012Influence of the structure of MgO·nAl2O3 spinel lattices on transparent ceramics processing and properties
Krell, Andreas; Waetzig, Katja; Klimke, Jens
Zeitschriftenaufsatz, Konferenzbeitrag
2012Kinetics of rare earth incorporation and its role in densification and microstructure formation of alpha-Sialon
Herrmann, M.; Höhn, S.; Bales, A.
Konferenzbeitrag, Zeitschriftenaufsatz
2012Material- und Energieeffizienz in der Porzellanindustrie - Grundlage für die Wettbewerbsfähigkeit der Branche
Rösler, G.; Rösler, J.; Schirmer, P.; Häusler, A.; Fischer, G.
Zeitschriftenaufsatz
2012Pressure-assisted sintering of WC ceramics
Poetschke, J.; Richter, V.; Michaelis, A.
Abstract
2012Silver processing in thick film technology for power electronics
Eberstein, M.; Feller, C.; Seuthe, T.; Ihle, M.; Ziesche, S.; Gora, F.
Konferenzbeitrag
2012Towards highly conductive silver pastes for LTCC power electronics
Eberstein, M.; Kretzschmar, C.; Seuthe, T.; Marcinkowski, M.; Ihle, M.; Ziesche, S.; Partsch, U.; Gora, F.
Konferenzbeitrag
2011Characterization of the materials synthesized by high pressure-high temperature treatment of a polymer derived t-BC2N ceramic
Matizamhuka, Wallace R.; Sigalas, Iakovos; Herrmann, Mathias; Dubronvinsky, Leonid; Dubrovinskaia, Natalia; Miyajima, Nobuyoshi; Mera, Gabriela; Riedel, Ralf
Zeitschriftenaufsatz
2011Temperature distribution during FAST/SPS densification
Räthel, J.; Herrmann, M.
Vortrag
2010Micro-segregations in liquid phase sintered silicon carbide ceramics
Herrmann, M.; Neher, R.; Brandt, K.; Hoehn, S.
Zeitschriftenaufsatz
2010Sintering and mechanical properties of AlMgB14 composite materials
Herrmann, M.; Bodkin, R.; Coville, N.J.; Thiele, M.
Zeitschriftenaufsatz
2009Liquid phase assisted densification of superhard B6O materials
Herrmann, M.; Raethel, J.; Bales, A.; Sempf, K.; Sigalas, I.; Hoehn, M.
Zeitschriftenaufsatz
2009Robust LTCC/PZT sensor-actuator-module for aluminium die casting
Flössel, M.; Scheithauer, U.; Gebhardt, S.; Schönecker, A.; Michaelis, A.
Konferenzbeitrag
2009Temperature distribution for electrically conductive and non-conductive materials during Field Assisted Sintering (FAST)
Räthel, J.; Herrmann, M.; Beckert, W.
Zeitschriftenaufsatz
2009The wetting behaviour and reaction kinetics in diamond-silicon carbide systems
Mlungwane, K.; Sigalas, I.; Herrmann, M.; Rodriguez, M.
Zeitschriftenaufsatz
2008"Snow flake" structures in silicon nitride ceramics - Reasons for large scale optical inhomogeneities
Herrmann, M.; Schulz, I.; Bales, A.; Sempf, K.; Hoehn, S.
Zeitschriftenaufsatz
2008Discrete element simulations of constrained ceramic powder sintering
Wonisch, A.; Kraft, T.; Moseler, M.; Riedel, H.
Zeitschriftenaufsatz
2008Liquid phase assisted hot pressing of boron suboxide-materials
Andrews, A.; Herrmann, M.; Shabalala, T.C.; Sigalas, I.
Zeitschriftenaufsatz
2008A new oxidation protection strategy for silicon carbide foams
Martin, H.-P.; Standke, G.; Adler, J.
Zeitschriftenaufsatz
2007The AC conductivity of liquid-phase-sintered silicon carbide
Sauti, G.; Can, A.; McLachlan, D.S.; Herrmann, M.
Zeitschriftenaufsatz
2007Discrete element modeling of anisotropy development during constrained sintering of alumina
Wonisch, A.; Kraft, T.; Moseler, M.; Riedel, H.
Konferenzbeitrag
2007Electrochemical corrosion of solid and liquid phase sintered silicon carbide in acidic and alkaline environments
Andrews, A.; Herrmann, M.; Sephton, M.; Machio, C.; Michaelis, A.
Zeitschriftenaufsatz
2007PZT thick films for sensor and actuator applications
Gebhardt, S.; Seffner, L.; Schlenkrich, F.; Schönecker, A.
Zeitschriftenaufsatz, Konferenzbeitrag
2007Simulations of the influence of rearrangement during sintering
Henrich, B.; Wonisch, A.; Kraft, T.; Moseler, M.; Riedel, H.
Zeitschriftenaufsatz
2007Stress-induced anisotropy of sintering alumina: Discrete element modelling and experiments
Wonisch, A.; Guillon, O.; Kraft, T.; Moseler, M.; Riedel, H.; Rödel, J.
Zeitschriftenaufsatz
2006Anisotropic liquid phase sintering investigated by means of micromechanical and discrete element modeling
Wonisch, A.; Korn, K.; Kraft, T.; Riedel, H.
Konferenzbeitrag
2006Densification of liquid phase sintered silicon carbide
Can, A.; Herrmann, M.; McLachlan, D.S.; Sigalas, I.; Adler, J.
Zeitschriftenaufsatz
2006Effects of the homogeneity of particle coordination on solid-state sintering of transparent alumina
Krell, A.; Klimke, J.
Zeitschriftenaufsatz
2006The influence of porosity on the electrical properties of liquid-phase sintered silicon carbide
Ihle, J.; Martin, H.-P.; Herrmann, M.; Obenaus, P.; Adler, J.; Hermel, W.; Michaelis, A.
Zeitschriftenaufsatz
2006Multi-scale simulations of rearrangement effects and anisotropic behavior during sintering
Wonisch, A.; Kraft, T.; Riedel, H.
Konferenzbeitrag
2005Alloying and sintering behaviour of selected iron-graphite-master alloy powder mixtures
Castro Pinto, F.; Sarasola, M.; Baumgaertner, F.; Dougan, M.; Mitchell, S.; Lipp, K.; Bender, H.; Coffin, C.; Dunkley, J.
Konferenzbeitrag
2005Computer simulation as a tool in PM material science and technology
Kraft, T.; Riedel, H.; Gumbsch, P.
Konferenzbeitrag
2005Modelling and simulation of processing steps in powder technology using particle dynamics
Kraft, T.; Henrich, B.; Bierwisch, C.; Moseler, M.; Riedel, H.
Konferenzbeitrag
2004Comments on "Spark Plasma Sintering of Ceramics"
Krell, A.; Bruggen, M.P.B. van
Zeitschriftenaufsatz
2004Finite element simulation of cold isostatic pressing and sintering of SiC components
Reiterer, M.; Kraft, T.; Janosovits, U.; Riedel, H.
Zeitschriftenaufsatz
2004Manufacturing of a gear wheel made from reaction bonded alumina - numerical simulation of the sinterforming process
Reiterer, M.; Kraft, T.; Riedel, H.
Konferenzbeitrag, Zeitschriftenaufsatz
2004Numerical simulation of solid state sintering
Kraft, T.; Riedl, H.
Zeitschriftenaufsatz
2003Processing techniques for functionally graded materials
Kieback, B.; Neubrand, A.; Riedel, H.
Zeitschriftenaufsatz
2003Transparent sintered sub-mum Al2O3 with IR transmissivity equal to sapphire
Krell, A.; Baur, G.M.; Dähne, C.
Konferenzbeitrag
2002Numerical simulation of die compaction and sintering
Kraft, T.; Riedel, H.
Zeitschriftenaufsatz
2001Colour of gas-pressure-sintered silicon nitride ceramics. Part 1 : Experimental data
Herrmann, M.; Goeb, O.
Zeitschriftenaufsatz
2001Colour of gas-pressure-sintered silicon nitride ceramics. Part 2 : Thermodynamic considerations
Herrmann, M.; Goeb, O.
Zeitschriftenaufsatz
2001Processes during the Heat Treatment (Sintering) of WC-Co Compacts
Gestrich, T.; Leitner, G.; Jaenicke-Rößler, K.
Konferenzbeitrag
2001Some new aspects of microstructural design of Beta-Si3N4 ceramics
Herrmann, M.; Schulz, I.; Hermel, W.; Schubert, C.; Wendt, A.
Zeitschriftenaufsatz
1999Application of thermal analysis to material science
Leitner, G.
Zeitschriftenaufsatz
1999Debinding and sintering of ceramics. Optimisation through thermoanalytical simulation
Leitner, G.; Jaenicke-Rößler, K.; Gestrich, T.; Breuning, T.
Zeitschriftenaufsatz
1999Distortions and cracking of graded components during sintering
Riedel, H.; Kraft, T.
Konferenzbeitrag
1999A new 0.4 mu m WC powder as well as powder-related properties and sintering behaviour of 0.6 to 30 mu m WC-Co hardmetals
Gille, G.; Szesny, B.; Leitner, G.
Zeitschriftenaufsatz
1998Development of corrosion. Fatigue resistant diffusion. Bonded pump impellers from stainless PM steels
Sonsino, C.M.; Zieschang, R.; Arnhold, V.; Sandritter, H.H.; Gonia, D.
Konferenzbeitrag
1998Fatigue behaviour of sintered materials and components under operational service
Sonsino, C.M.
Konferenzbeitrag
1998Fatigue design. Testing, quality reliability and safety on the example of automotive PM' components
Sonsino, C.M.
Konferenzbeitrag
1998Grain shape in sintered submicrometre alumina
Krell, A.; Obenaus, P.
Zeitschriftenaufsatz
1998Materials technology drives impeller design
Sonsino, C.M.
Zeitschriftenaufsatz
1998PM looks forward to pump impeller role
Sonsino, C.M.; Zieschang, R.; Arnhold, V.; Hofmann, B.; Gonia, D.; Sandritter, K.H.
Zeitschriftenaufsatz
1997Explosive Compaction of Nanosized TiN-Powders
Rabe, T.; Wäsche, R.; Prümmer, R.
Zeitschriftenaufsatz
1997A liquid phase sintering model
McHugh, P.E.; Riedel, H.
Zeitschriftenaufsatz
1996Development of high-strength P/M steels with optimized microstructure by new alloying and sintering techniques
Brandt, U.; Sonsino, C.M.; Engström, U.; Ernst, E.; Hoffmann, E.
Konferenzbeitrag
1996The influence of shaping method on the grain size dependence of strength in dense submicrometre alumina
Krell, A.; Blank, P.
Zeitschriftenaufsatz
1996A model for liquid phase sintering
Svoboda, J.; Riedel, H.; Gaebel, R.
Zeitschriftenaufsatz
1996Pressing and sintering in powder technology
Riedel, H.
Konferenzbeitrag
1995Binder design and process control for high performance MIM-materials
Petzoldt, F.; Eifert, H.; Hartwig, T.; Veltl, G.
Konferenzbeitrag
1995The differnt roles of substoichiometry and transient liquid phase on sintering of ZrO2/TiC with TiH2
Krell, A.; Blank, P.
Konferenzbeitrag
1995Fortschritte für Hochleistungs-Aluminiumoxid
Krell, Andreas
Aufsatz in Buch
1995New in situ measuring methods for the optimization of sintering processes
Raether, F.; Müller, G.
Konferenzbeitrag
1995New in situ measuring methods for the optimization of sintering processes
Raether, F.; Müller, G.
Zeitschriftenaufsatz
1995Prediction of shape distortions of hard metal parts by numerical simulation of pressing and sintering
Sun, D.-Z.; Riedel, H.
Konferenzbeitrag
1995Preparation and ferroelectric behaviour of PZT-fibres
Watzka, W.; Sporn, D.; Franke, K.; Scholz, H.
Konferenzbeitrag
1995Sintered alumina - hard and strong like hot-pressed Al2O3/TiC-composites
Krell, A.; Blank, P.
Konferenzbeitrag
1995Sintering ZrO2/TiC composites with TiH2. The role of transient liquid phase and of substoichiometry
Krell, A.; Blank, P.; Pippel, E.; Woltersdorf, J.
Zeitschriftenaufsatz
1995Synthesis of Intermetallic Aluminides by Explosive Reaction Pressing
Prümmer, R.; Kochsiek, D.; Brunold, A.
Zeitschriftenaufsatz
1994Equilibrium pore surfaces, sintering stresses and constitutive equations for the intermediate and late stages of sintering. Part 1. Computation of equilibrium surfaces
Svoboda, J.; Riedel, H.; Zipse, H.
Zeitschriftenaufsatz
1994Equilibrium pore surfaces, sintering stresses and constitutive equations for the intermediate and late stages of sintering. Part 2. Diffusional densification and creep
Riedel, H.; Svoboda, J.; Zipse, H.
Zeitschriftenaufsatz
1994Microstructure and properties of SiCN-nanocomposites
Herrmann, M.; Klemm, H.; Schubert, C.; Hermel, W.; Millers, T.; Rendtel, A.
Aufsatz in Buch
1994Neue Keramische Werkstoffe
Krell, A.; Pippel, E.; Reetz, T.; Sorge, G.; Woltersdorf, J.
: Michalowsky, L.; Herrmann, M.
Buch
1994Numerical simulation of die pressing and sintering - development of constitutive equations
Riedel, H.; Meyer, D.; Svoboda, J.; Zipse, H.
Zeitschriftenaufsatz
1994Numerical simulation of die pressing and sintering-development of constitutive equations
Riedel, H.; Svoboda, J.; Zipse, H.
Konferenzbeitrag
1994Siliciumnitridwerkstoffe. Abschnitt 4.2.4.1
 
Aufsatz in Buch
1994Sintering and microstructure of Si3N4-materials
Hermel, W.; Herrmann, M.; Schulz, I.
Konferenzbeitrag
1993Al2O3 and ZrO2 composites with high TiC contents fabricated by tailoring oxide powders.
Krell, A.; Blank, P.
Aufsatz in Buch
1993Constitutive equations for the mechanical behavior of powder compacts during sintering
Riedel, H.; Svoboda, J.; Zipse, H.; Gäbel, R.
Konferenzbeitrag
1993Densification microstructure and properties of Si3N4-TI-C,N-composites
Herrmann, M.; Balzer, B.; Schubert, C.; Hermel, W.
Zeitschriftenaufsatz
1993Densification, microstructure and properties of SiCN-nanocomposites
Herrmann, M.; Millers, T.; Rendtel, A.; Reich, T.; Boden, G.; Schubert, C.
Konferenzbeitrag
1993Have the limits of the development of Beta-Si3N4-materials already been reached?
Hermel, W.; Herrmann, M.; Schubert, C.
Konferenzbeitrag
1993Microstructure, mechanical properties and wear of Si3N4/TiN composites
Herrmann, M.; Beger, A.; Schubert, C.; Hermel, W.; Meißner, E.; Ziegler, G.
Konferenzbeitrag
1993Numerical simulation of die pressing and sintering-development of constitutive equations
Riedel, H.; Meyer, D.; Svoboda, J.; Zipse, H.
Konferenzbeitrag
1993Redistribution of the liquid phase during sintering of silicon nitride
Herrmann, M.; Boberski, C.; Michael, G.; Putzky, G.; Hermel, W.
Zeitschriftenaufsatz
1993A theoretical study of grain growth in porous solids during sintering
Riedel, H.; Svoboda, J.
Zeitschriftenaufsatz
1993TiC-strengthened Al2O3 by powder tailoring and doping procedures
Krell, A.; Blank, P.
Zeitschriftenaufsatz
1992Investigations of different stainless steel MIM feedstocks with a novel binder system
Petzoldt, F.; Veltl, G.; Kunze, H.-D.; Seidel, R.
Konferenzbeitrag
1992Pore-boundary interactions and evolution equations for the porosity and the grain size during sintering
Svoboda, J.; Riedel, H.
Zeitschriftenaufsatz
1992Simulation of die pressing and sintering of powder metals, hard metals and ceramics
Riedel, H.; Sun, D.-Z.
Konferenzbeitrag
1991AES and XPS investigations for the topochemical characterization of dope elements on WC powders
Baalmann, A.; Schlett, V.
Zeitschriftenaufsatz
1991Simulation of pressing and sintering of powders.
Sun, D.-Z.; Hennies, M.; Riedel, H.
Tagungsband
1990A constitutive model for the finite-element simulation of sintering - distortions and internal stresses.
Riedel, H.
Konferenzbeitrag
1990Evaluation of different heat treatment methods for fatigue design of notched and differently loaded PM' parts
Esper, F.J.; Sonsino, C.M.
Konferenzbeitrag
1990Fatigue design of sintered con-rods
Sonsino, C.M.
Bericht
1990Influence of As-sintered material strength on the improvement of fatigue behaviour by surface rolling
Tengzelius, J.; Schlieper, G.; Sonsino, C.M.
Konferenzbeitrag