Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Evaluation of Offline Path Planning for Laser Metal Deposition on Freeform Surfaces
Bold, Marie-Noemi; Pirch, Norbert; Ziegler, Stephan; Schleifenbaum, Johannes Henrich
Konferenzbeitrag
2019Integrated Flow for Reverse Engineering of Nanoscale Technologies
Lippmann, Bernhard; Werner, Michael; Unverricht, Niklas; Singla, Aayush; Egger, Peter; Dübotzky, Anja; Gieser, Horst; Rasche, Martin; Kellermann, Oliver; Graeb, Helmut
Konferenzbeitrag
2018Improving the error behavior of DRAM by exploiting its Z-channel property
Kraft, Kira; Sudarshan, Chirag; Mathew, Deepak M.; Weis, Christian; Wehn, Norbert; Jung, Matthias
Konferenzbeitrag
2018Obtaining as-built models of manufacturing plants from point clouds
Meidow, Jochen; Usländer, Thomas; Schulz, Karsten
Zeitschriftenaufsatz
2017Maintainability is a versatile quality attribute
Knodel, Jens; Naab, Matthias
Bericht
2017Nature inspired system analysis
Tenev, Vasil
Zeitschriftenaufsatz
2017Nature inspired system analysis
Tenev, Vasil
Bericht
2017Using run-time reverse-engineering to optimize DRAM refresh
Mathew, Deepak M.; Zulian, Eder F.; Jung, Matthias; Kraft, Kira; Weis, Christian; Jacob, Bruce; Wehn, Norbert
Konferenzbeitrag
2016Maintainability is a versatile quality attribute
Knodel, Jens; Naab, Matthias
Zeitschriftenaufsatz
2016Verfahren zur schnellen, digitalen Modellbildung für Inspektions- und Reengineeringprozesse
Grosser, Hendrik
: Stark, R.
Dissertation
2015Modularity - often desired, but rarely achieved
Knodel, Jens; Naab, Matthias; Weitzel, Balthasar
Zeitschriftenaufsatz
2014eCITY+. A tool to analyze software architectural relations through interactive visual support
Khan, Taimur; Humayoun, Shah Rukh; Amrhein, Karsten; Barthel, Henning; Ebert, Achim; Liggesmeyer, Peter
Konferenzbeitrag
2014Leitfaden zur optischen 3D-Messtechnik
: Sackewitz, Michael (Hrsg.)
Buch
2014Reverse Engineering von Schiffsstrukturen
Grewe, Olaf; Geist, Michael
Zeitschriftenaufsatz
2013Procedural descriptions for analyzing digitized artifacts
Ullrich, Torsten; Schinko, Christoph; Schiffer, Thomas; Fellner, Dieter W.
Zeitschriftenaufsatz
2013RECoVar: A solution framework towards reverse engineering variability
Zhang, Bo; Becker, Martin
Konferenzbeitrag
2013RECoVar: A solution framework towards reverse engineering variability
Zhang, Bo; Becker, Martin
Bericht
2012Applying bioinformatics in the analysis of software variants
Tenev, Vasil; Duszynski, Slawomir
Konferenzbeitrag
2012Applying bioinformatics in the analysis of software variants
Tenev, Vasil; Duszynski, Slawomir
Bericht
2012Recovering variability information from the source code of similar software products
Duszynski, Slawomir; Becker, Martin
Konferenzbeitrag
2012Recovering variability information from the source code of similar software products
Duszynski, Slawomir; Becker, Martin
Bericht
2012Reverse Engineering
Rosemann, Bernd; Freiberger, Stefan
Aufsatz in Buch
2012Understanding deployment costs of enterprise systems. Towards architecture support in deployment decisions
Weitzel, Balthasar
Bericht
2012Understanding deployment costs of enterprise systems. Towards architecture support in deployment decisions
Weitzel, B.
Konferenzbeitrag
2011Analyzing the source code of multiple software variants for reuse potential
Duszynski, Slawomir; Knodel, Jens; Becker, Martin
Bericht
2011Analyzing the source code of multiple software variants for reuse potential
Duszynski, Slawomir; Knodel, Jens; Becker, Martin
Konferenzbeitrag
2011Iterative refinement of specification for component based embedded systems
Shahbaz, Muzammil; Shashidhar, K.C.; Eschbach, Robert
Bericht
2011Iterative refinement of specification for component based embedded systems
Shahbaz, Muzammil; Shashidhar, K.C.; Eschbach, Robert
Konferenzbeitrag
2011Reverse engineering of planning data for digitally supported MRO services
Grosser, H.; Kuhn, D.
Konferenzbeitrag
2011A scalable goal-oriented approach to software variability recovery
Duszynski, Slawomir
Bericht
2011A scalable goal-oriented approach to software variability recovery
Duszynski, Slawomir
Konferenzbeitrag
2011Variance analysis and comparison in computer-aided design
Ullrich, Torsten; Schiffer, Thomas; Schinko, Christoph; Fellner, Dieter W.
Konferenzbeitrag
2010Automatic discovery of unspecified behaviors in automotive control software
Shahbaz, Muzammil; Eschbach, Robert
Konferenzbeitrag
2010Reverse engineering ECUs of automotive components - a case study
Shahbaz, Muzammil; Eschbach, Robert
Konferenzbeitrag
2010Visualizing and analyzing software variability with bar diagrams and occurrence matrices
Duszynski, Slawomir
Bericht
2010Visualizing and analyzing software variability with bar diagrams and occurrence matrices
Duszynski, Slawomir
Konferenzbeitrag
2009Architecture-centric maintenance for embedded systems
Knodel, Jens; Mende, Thilo; Leszak, Marek; Meier, Gerald; Rückert, Christian; Schitter, Clemens; Guder, Frank
Bericht
2009CoVeR: Component-connector view reconstruction
Forster, Thomas
: Knauber, Peter (Supervisor); Knodel, Jens (Supervisor)
Master Thesis
2009From architecture to source code
Knodel, Jens
Bericht
2009From architecture to source code
Knodel, Jens; Muthig, Dirk
Bericht
2009From architecture to source code - how to ensure architecture compliance in the implemented system
Knodel, Jens
Zeitschriftenaufsatz
2009Reference architectures for software analysis platform extensions
Rost, Dominik
: Knauber, Peter (Supervisor); Knodel, Jens (Supervisor); Lindvall, Mikael (Supervisor)
Master Thesis
2009Reverse engineering for web-service re-engineering
Defounga, N.
: Stöckert, H.
Diplomarbeit
2009SAVE: Software Architecture Visualization and Evaluation
Duszynski, Slawomir; Knodel, Jens; Lindvall, Mikael
Konferenzbeitrag
2008A decade of reverse engineering at Fraunhofer IESE - the changing role of reverse engineering in applied research
Knodel, Jens; Muthig, Dirk
Bericht
2008A decade of reverse engineering at Fraunhofer IESE - the changing role of reverse engineering in applied research
Knodel, Jens; Muthig, Dirk
Konferenzbeitrag
2008High-Tech Solutions and Concepts - Hochtechnologielösungen und anwendbare Praxis-Konzepte
: Meyer, R.
Tagungsband
2008An integration of requirements and user interface specifications
Mukasa, Kizito Ssamula; Kaindl, Hermann
Konferenzbeitrag
2008Reversing the reasons for changes by a-posteriori recording of decisions made
Knodel, Jens; Muthig, Dirk; Forster, Thomas; Capilla, Rafael
Bericht
2007On reverse engineering of structural and behavioral views for architecture compliance checking
Weinmann, Jörg
: Rombach, H. Dieter (Supervisor); Lindvall, Mikael (Supervisor); Ganesan, Dharmalingam (Supervisor); Knodel, Jens (Supervisor)
Diplomarbeit
2006Assessing merge potential of existing engine control systems into a product line
Yoshimura, K.; Ganesan, D.; Muthig, D.
Konferenzbeitrag
2006Case studies of static software architecture evaluations
Knodel, J.; Lindvall, M.; Muthig, D.; Naab, M.
Zeitschriftenaufsatz
2006Defining a strategy to introduce a software product line using existing embedded systems
Yoshimura, K.; Ganesan, D.; Muthig, D.
Konferenzbeitrag
2006Reverse Engineering - Automatisierte Verfahren für die Produktentwicklung
Effenberger, Ira
Konferenzbeitrag
2006Reverse engineering in a reuse context
Knodel, J.; Koschke, R.; Mende, T.
Bericht
2006Starting a software product line by reengineering a set of existing product variants
Yoshimura, K.; Bayer, J.; Ganesan, D.; Muthig, D.
Konferenzbeitrag
2006Static evaluation of software architectures
Knodel, J.; Lindvall, M.; Muthig, D.; Naab, M.
Konferenzbeitrag
2005ADORE-AR: Software Architecture Reconstruction with Partitioning and Clustering
Girard, J.-F.
Dissertation
2005Analyzing the product line adequacy of existing components
Knodel, J.; Muthig, D.
Konferenzbeitrag
2005Asset recovery and their incorporation into product lines
Knodel, J.; John, I.; Ganesan, D.; Pinzger, M.; Usero, F.; Arciniegas, J.L.; Riva, C.
Bericht
2005Asset recovery and their incorporation into product lines
Knodel, J.; John, I.; Ganesan, D.; Pinzger, M.; Usero, F.; Arciniegas, J.L.; Riva, C.
Konferenzbeitrag
2005Combination of requirements recovery and architecture recovery for existing systems
Forster, T.; Ganesan, D.; Girard, J.-F.; Grund, M.; John, I.; Knodel, J.
Bericht
2005Comparing design alternatives from field-tested systems to support product line architecture design
Knodel, J.; Forster, T.; Girard, J.-F.
Konferenzbeitrag
2005EU-Project DETECT: New product design and engineering technologies based on next generation computed tomography
Effenberger, I.; Flisch, A.; Thierry, R.
Konferenzbeitrag
2005Identifying domain-specific reusable components from existing OO systems to support product line migration
Ganesan, D.; Knodel, J.
Konferenzbeitrag
2005Re-engineering of inhomogeneous coatings based on in-situ optical broadband monitoring data
Wilbrandt, S.; Stenzel, O.; Gäbler, D.; Kaiser, N.
Konferenzbeitrag
2005The reverse engineering technology form determination and form profiling in the product development
Roth-Koch, S.
Konferenzbeitrag
2005Static evaluation of software architectures
Knodel, J.; Lindvall, M.; Muthig, D.; Naab, M.
Bericht
2005A systematic approach for comparing and reusing design alternatives
Knodel, J.; Forster, T.; Girard, J.-F.
Zeitschriftenaufsatz
2004Architekturentwicklung, basierend auf existierenden Systemen
Bayer, J.; Girard, J.-F.; Knodel, J.; Kolb, R.; Muthig, D.
Aufsatz in Buch
2004Comparing design alternatives from field-tested systems to support product line architecture design
Knodel, J.; Forster, T.; Girard, J.-F.
Bericht
2004Definition of reference architectures based on existing systems
Bayer, J.; Forster, T.; Ganesan, D.; Girard, J.-F.; John, I.; Knodel, J.; Kolb, R.; Muthig, D.
Bericht
2004A formal approach for interoperability between mobile agent systems and component based architectures
Pinsdorf, U.
Konferenzbeitrag
2004A meta-model for fact extraction from Delphi source code
Knodel, J.; Calderon-Meza, G.
Konferenzbeitrag
2004Neue Verfahren zur Segmentierung und Feature-Extraktion in Messpunktwolken
Stotz, M.
Konferenzbeitrag
2004Request-driven reverse engineering for product lines
Knodel, J.; Girard, J.-F.
Konferenzbeitrag
2004Reverse Engineering verbindet realen und digitalen Prototypen
Roth-Koch, S.
Zeitschriftenaufsatz
2004Die Rolle von Mess- und Prüftechnik in Rapid Manufacturing
Modrich, K.-U.
Konferenzbeitrag
2004Segmentierung und Vereinfachung von Dreiecksnetzen durch Detektion theoretischer Kanten
Hirschbach, H.
: Klein, K. (Prüfer)
Master Thesis
2003Architecture recovery for product families
Pinzger, M.; Gall, H.; Girard, J.-F.; Knodel, J.; Riva, C.; Pasman, W.; Broerse, C.; Wijnstra, J.G.
Konferenzbeitrag
2003Definition of reference architectures based on existing systems
Bayer, J.; Ganesan, D.; Girard, J.-F.; Knodel, J.; Kolb, R.; Schmid, K.
Bericht
2003Improving fact extraction of framework-based software systems
Knodel, J.; Pinzger, M.
Konferenzbeitrag
2003Innovative Produktentwicklung
Modrich, K.-U.
Konferenzbeitrag
2003A meta-model for fact extraction from delphi source code
Knodel, J.; Calderon-Meza, G.
Konferenzbeitrag
2003Reconstruction of architectural views by design hypothesis
Knodel, J.
Zeitschriftenaufsatz
2003The reverse engineering construction of 3D models using the virtual reality
Effenberger, I.; Bolboaca, L.; Bulgaru, M.; Ioanoviciu, T.
Konferenzbeitrag
2002Euro-uRapid 2002
: Meyer, R.
Tagungsband
2002Industrial computed tomography for reverse engineering applications
Schuhmann, Norbert; Bolboaca, Lucia Ioana
Konferenzbeitrag
2002Object digitalization using a scanning fringe projection system
Zacher, M.; Krohne, I.; Glaser, U.; Pfeifer, T.
Konferenzbeitrag
2002Ein regelbasierter Beobachter zur prozessorientierten Integration betrieblicher Informationssysteme
Barnekow, T.
Dissertation
2002Reverse Engineering Technologie. Flächenrückführung
Roth-Koch, S.
Konferenzbeitrag
2002Software evolution in practice. Adding web functionality to a legacy system
Anastasopoulos, M.; Bayer, J.; Bunse, C.; Girard, J.-F.; John, I.; Muthig, D.; Sody, P.; Tolzmann, E.
Bericht
2001Erweiterung eines graphischen Editors zur Verbesserung von Architektur-Wiedererkennung
Hettesheimer, R.
: Rombach, H.D. (Prüfer); Girard, J.-F. (Prüfer)
Diplomarbeit
2001New methods for feature-line extraction from point clouds
Schuhmann, N.
Konferenzbeitrag
2001uRapid 2001 - International User's Conference on Rapid Prototyping & Rapid Tooling & Rapid Manufacturing
: Kühnle, H.; Meyer, R.
Tagungsband
2000Data Exchange in Bauhaus
Czeranski, J.; Eisenbarth, T.; Kienle, H.M.; Koschke, R.; Plödereder, E.; Simon, D.; Zhang, Y.; Girard, J.-F.; Würthner, M.
Konferenzbeitrag
2000Filigrane (FlexIbLe IPR for Software AGent ReliANcE)
Jalali-Sohi, M.; Hachez, G.; Vasserot, C.
Konferenzbeitrag
2000FILIGRANE (FlexIble IPR for Software AGent ReliANcE) Protocol. A security protocol for trading of mobile code in Internet
Jalali-Sohi, M.
Konferenzbeitrag
2000uRapid2000, International User's Conference on Rapid Prototyping & Rapid Tooling & Rapid Manufacturing. Proceedings
: Meyer, R.; Kühnle, H.
Buch
1999Entwicklungstendenzen im Rapid Product Development
Rauh, W.; Koch, K.U.; Schuhmann, N.
Konferenzbeitrag
1999A Metric-based Approach to Detect Abstract Data Types and State Encapsulations
Girard, J.-F.; Koschke, R.; Schied, G.
Zeitschriftenaufsatz
1999Virtuelle Produkte und Rapid Prototyping
Rauh, W.
Konferenzbeitrag
1998Implementing a Concept Analysis Tool for Identifying Abstract Data Types in C code
Graudejus, H.
: Rombach, H.D. (Prüfer); Girard, J.-F. (Prüfer)
Diplomarbeit
1998An Intermediate Representation for Integrating Reverse Engineering Analyses
Koschke, R.; Girard, J.-F.; Würthner, M.
Konferenzbeitrag
1997DARE: Domain-Augmented ReEngineering
DeBaud, J.-M.
Konferenzbeitrag
1997A Metric-based Approach to Detect Abstract Data Types and State Encapsulations
Girard, J.-F.; Koschke, R.; Schied, G.
Konferenzbeitrag
1997Vereinigung von Punktewolken für eine effiziente Flächenrückführung
Neugebauer, P.J.
Konferenzbeitrag
1996Lessons from a Domain-Based Reengineering Effort
DeBaud, J.-M.
Konferenzbeitrag
1996Scanning and reconstruction of work pieces from range images
Neugebauer, P.J.
Konferenzbeitrag
1996Verstehen von Software
Witschurke, R.; Löwe, M.
Aufsatz in Buch
1996Virtual Cloning - Dokumentation in der Denkmalpflege
Neugebauer, P.J.
Konferenzbeitrag
1995Ein Arbeitsplatz für das Verstehen von Programmsystemen
Witschurke, R.
Buch
1995Digitalisierung von 2D- und 3D-Teilen, Reverse Engineering
Rauh, W.
Konferenzbeitrag
1995From master pattern to prototype via reverse engineering and rapid prototyping
Kunze, H.-D.; Pintat, T.; Greulich, M.; Greul, M.
Zeitschriftenaufsatz
1995Programmanalyse - interaktives Reverse Engineering
Witschurke, R.
Zeitschriftenaufsatz
1992Wiederverwendung in der Informationsverarbeitung - Re-use, Re-engineering, Reverse Engineering
Witschurke, R.
Buch

 

<