| | |
|---|
| 2021 | Fatigue performance of high- and low-strength repaired welded steel joints
Schubnell, J.; Ladendorf, P.; Sarmast, A.; Farajian, M.; Knödel, P. | Zeitschriftenaufsatz |
| 2021 | Mechanical and optical properties of as-grown and thermally annealed titanium dioxide from titanium tetrachloride and water by atomic layer deposition
Ylivaara, Oili M.E.; Langner, Andreas; Liu, Xuwen; Schneider, Dieter; Julin, Jaakko; Arstila, Kai; Sintonen, Sakari; Ali, Saima; Lipsanen, Harri; Sajavaara, Timo; Hannula, Simo-Pekka; Puurunen, Riikka L. | Zeitschriftenaufsatz |
| 2020 | Nondestructive Characterization of Residual Stresses Using Micromagnetic and Ultrasonic Techniques
Rabung, Madalina; Amiri, Meisam; Becker, Michael M.; Kopp, Melanie; Tschuncky, Ralf; Veile, Ines; Weber, Fabian; Weikert-Müller, Miriam; Szielasko, Klaus | Aufsatz in Buch |
| 2020 | Sub-Component testing for structural adhesive joint assessment in wind turbine rotor blades
Sayer, Florian
: Reuter, Andreas | Dissertation |
| 2019 | Modeling hydrogen diffusion in a tribological scenario: A failure analysis of a thrust bearing
Khader, I.; Kürten, D.; Raga, R.; Winzer, N.; Kailer, A. | Zeitschriftenaufsatz |
| 2019 | Nondestructive Testing with 3MA - An Overview of Principles and Applications
Wolter, Bernd; Gabi, Yasmine; Conrad, Christian | Zeitschriftenaufsatz |
| 2019 | On the validity of several previously published perturbation formulas for the acoustoelastic effect on Rayleigh waves
Mora, Pierric; Spies, Martin | Zeitschriftenaufsatz |
| 2019 | Perturbation theory for acoustoelastic effects in heterogeneous media
Mora, Pierric; Spies, Martin | Zeitschriftenaufsatz |
| 2019 | Reliability testing and stress measurement of QFN packages encapsulated by an open-ended microwave curing system
Adamietz, Raphael; Desmulliez, Marc P.Y.; Pavuluri, Sumanth Kumar; Tilford, Tim; Bailey, Chris; Schreier-Alt, Thomas; Warmuth, Jens | Zeitschriftenaufsatz |
| 2018 | Effect of humidity on the residual stress in silicon-containing plasma polymeric coatings
Top, Michiel; Mulder, Guus; Prager, Nicole; Fahlteich, John; Hosson, Jeff de | Zeitschriftenaufsatz |
| 2018 | Inversion of Residual Stress Profiles from Ultrasonic Rayleigh Wave Dispersion Data
Mora, Pierric; Spies, Martin | Zeitschriftenaufsatz |
| 2018 | Numerical fatigue life analysis of a high frequency mechanical impact treated industrial component based on damage mechanics models
Schubnell, J.; Farajian, M.; Däuwel, T.; Shin, Y. | Zeitschriftenaufsatz |
| 2018 | Numerical welding simulation as a basis for structural integrity assessment of structures: Microstructure and residual stresses
Hemmesi, Kimiya; Farajian, Majid | Aufsatz in Buch |
| 2018 | Topic review: Application of raman spectroscopy characterization in micro/nano-machining
Xu, Zongwei; He, Zhongdu; Song, Ying; Fu, Xiu; Rommel, Mathias; Luo, Xichun; Hartmaier, Alexander; Zhang, Junjie; Fang, Fengzhou | Zeitschriftenaufsatz |
| 2017 | Enhanced multiscale modeling of macroscopic and microscopic residual stresses evolution during multi-thermo-mechanical processes
Zhang, X.X.; Wang, D.; Xiao, B.L.; Andrä, H.; Gan, W.M.; Hofmann, M.; Ma, Z.Y. | Zeitschriftenaufsatz |
| 2016 | Approaches for structural simulation of additively manufactured metal parts
Schafstall, Hendrik; Khazan, Pavel; Mehmert, Patrick; Töppel, Thomas; Kordaß, Richard | Konferenzbeitrag |
| 2016 | Enhancement of the fatigue strength assessment of welded components by consideration of mean and residual stresses in the crack initiation and propagation phases
Baumgartner, Jörg | Zeitschriftenaufsatz |
| 2016 | Residual stress evaluation of a high performance machined pre-formed Ti6Al4V part
Dimitrov, Dimitri; Laubscher, R.F.; Sterzing, Andreas; Conradie, P.J.T.; Oosthuizen, G.; Blau, Peter; Schmidt, Gerhard; Hochmuth, Carsten; Styger, G.; Zachäus, Rene | Zeitschriftenaufsatz |
| 2014 | Aluminum oxide from trimethylaluminum and water by atomic layer deposition: The temperature dependence of residual stress, elastic modulus, hardness and adhesion
Ylivaara, O.M.E.; Liu, X.; Kilpi, L.; Lyytinen, J.; Schneider, D.; Laitinen, M.; Julin, J.; Ali, S.; Sintonen, S.; Berdova, M.; Haimi, E.; Sajavaara, T.; Ronkainen, H.; Lipsanen, H.; Koskinen, J.; Hannula, S.-P.; Puurunen, R.L. | Zeitschriftenaufsatz |
| 2014 | Description of the surface and subsurface material conditions after applying high frequency mechanical impact (HFMI) treatment, shot peening and deep rolling
Farjian, M.; Hardenacke, V.; Preussner, J.; Pfeiffer, W.; Siegele, D. | Konferenzbeitrag |
| 2014 | Less residual stresses in laser beam melting through a holistic approach including laser, scanning, material and machine parameters
Müller, Bernhard; Töppel, Thomas; Kranz, Burkhard; Hoeren, Karlheinz P.J.; Grimm, Tobias; Witt, Gerd | Konferenzbeitrag |
| 2014 | Third order elastic constants and rayleigh wave dispersion of shot peened aero-engine materials
Rjelka, Marek; Barth, Martin; Reinert, Sven; Köhler, Bernd; Bamberg, Joachim; Baron, Hans Uwe; Hessert, Roland | Konferenzbeitrag |
| 2013 | Induction-assisted laser beam welding of a thermomechanically rolled HSLA S500MC steel: A microstructure and residual stress assessment
Coelho, R.S.; Corpas, M.; Moreto, J.A.; Jahn, A.; Standfuß, J.; Kaysser-Pyzalla, A.; Pinto, H. | Zeitschriftenaufsatz |
| 2013 | Study of the influence of material and welding modeling on the residual stresses in longitudinal stiffeners
Nied, H.F.; Siegele, D. | Konferenzbeitrag |
| 2012 | Basic investigations to establish an ultrasonic stress evaluation technique for aero engine materials
Hubel, Sebastian; Dillhöfer, Alexander; Rieder, Hans; Spies, Martin; Bamberg, Joachim; Hessert, Roland; Preikszas, Christina | Konferenzbeitrag |
| 2012 | Future application fields of acoustic resonance analysis in non-destructive testing
Heinrich, Matthias; Kurzenhäuser, Sven; Waschkies, Thomas; Walte, Friedhelm; Goebel, Matthias; Valeske, Bernd | Konferenzbeitrag |
| 2012 | Micro-magnetic evaluation of micro-residual stresses of the IInd and IIIrd orders
Rabung, Madalina; Altpeter, Iris; Dobmann, Gerd; Szielasko, Klaus | Zeitschriftenaufsatz |
| 2012 | Static and dynamic characterization of AlN and nanocrystalline diamond membranes
Knöbber, F.; Zürbig, V.; Heidrich, N.; Hees, J.; Sah, R.E.; Baeumler, M.; Leopold, S.; Pätz, D.; Ambacher, O.; Lebedev, V. | Zeitschriftenaufsatz |
| 2011 | Measurement of Young's modulus and residual stress of thin SiC layers for MEMS high temperature applications
Pabst, O.; Schiffer, M.; Obermeier, E.; Tekin, T.; Lang, K.-D.; Ngo, H.-D. | Konferenzbeitrag |
| 2011 | Welding mechanics for advanced component safety assessment
Siegele, D. | Zeitschriftenaufsatz |
| 2010 | Shot peening of brittle materials - status and outlook
Pfeiffer, W.; Wenzel, J. | Konferenzbeitrag |
| 2009 | Calculation of stresses in two- and three-dimensional structures generated by induction assisted laser cladding
Brückner, F.; Lepski, D.; Beyer, E. | Konferenzbeitrag |
| 2009 | Effect of residual stresses on the fatigue behaviour of welded joints depending on loading conditions and weld geometry
Sonsino, C.M. | Konferenzbeitrag |
| 2009 | Effects on lifetime under spectrum loading
Sonsino, C.M. | Konferenzbeitrag |
| 2009 | Experimental and numerical investigation of sub-clad and surface cracks in cladded components
Hohe, J.; Brand, M.; Siegele, D. | Konferenzbeitrag |
| 2009 | Fatigue strength under constant and variable amplitude loading of spokes of cast aluminium wheels after ultrasonic impact treatment (UIT)
Sonsino, C.M.; Berg-Pollack, A.; Voellemcke, F.-J. | Konferenzbeitrag |
| 2009 | Nondestructive characterizing stress states in conventional deep drawing processes by means of electromagnetic methods
Altpeter, I.; Sklarczyk, C.; Kopp, M.; Kröning, M.; Voges-Schwieger, K.; Hübner, S.; Behrens, B.-A. | Konferenzbeitrag |
| 2008 | Assessment of flaws in cladded components under consideration of residual stress field
Siegele, D.; Hohe, J.; Brand, M. | Konferenzbeitrag |
| 2008 | Experimental and theoretical investigation of thermal stress in CFRP
Rinker, M.; Gutwinski, M.; Schäuble, R. | Konferenzbeitrag |
| 2008 | High-performance EUV multilayer optics
Kaiser, N.; Yulin, S.; Perske, M.; Feigl, T. | Konferenzbeitrag |
| 2008 | Industrial applications of 3MA - Micromagnetic multiparameter microstructure and stress analysis
Dobmann, G.; Altpeter, I.; Wolter, B.; Kern, R. | Konferenzbeitrag |
| 2008 | Investigation on residual stresses and fracture behaviour of cladded plates with defects
Hohe, J.; Brand, M.; Siegele, D. | Konferenzbeitrag |
| 2008 | The multiple-incremental hole drilling method
Pfeiffer, W.; Wenzel, J. | Zeitschriftenaufsatz |
| 2008 | Numerical fatigue strength evaluation of inhomogeneous, linear flow split profiles
Landersheim, V.; Dsoki, C. el; Hanselka, H.; Bruder, T.; Veleva, D.; Groche, P.; Bohn, T.; Müller, C.; Nieslony, A. | Konferenzbeitrag |
| 2007 | Determination of residual stress alterations, imposed by blasting on PVD films, by XRD and nanoindentations
Bouzakis, K.-D.; Pappa, M.; Skordaris, G.; Michailidis, N.; Klocke, F.; Bouzakis, E. | Konferenzbeitrag |
| 2007 | Strain relaxation in nanopatterned strained silicon round pillars
Himcinschi, C.; Singh, R.; Radu, I.; Milenin, A.P.; Erfurth, W.; Reiche, M.; Gösele, U.; Christiansen, S.H.; Muster, F.; Petzold, M. | Zeitschriftenaufsatz |
| 2007 | Welding simulation of aluminum automotive construction using SYSWELD simulation solution
Brand, M.; Siegele, D. | Zeitschriftenaufsatz |
| 2006 | Elektrochemisch generierte Werkstoffe für die Automobil- und Antriebstechnik - Werkstofftechnische Grundlagen
Romankiewicz, K. | Konferenzbeitrag |
| 2006 | Shot peening of hard chromium coatings. Damage or benefit?
Pfeiffer, W.; Blug, B.; Wenzel, J. | Konferenzbeitrag |
| 2006 | Simulation of welded aluminium automotive components
Veneziano, C.; Brand, M.; Pfeiffer, W.; Siegele, D.; Gumbsch, P. | Zeitschriftenaufsatz |
| 2006 | Strength characterization of laser diced silicon for application in solar industry
Schönfelder, S.; Bagdahn, J.; Baumann, S.; Kray, D.; Mayer, K.; Willeke, G.; Becker, M.; Christiansen, S. | Konferenzbeitrag |
| 2006 | Strengthening of silicon nitride ceramics by shot peening
Pfeiffer, W.; Gumbsch, P. | Zeitschriftenaufsatz |
| 2005 | Advances in shot peening of silicon nitride ceramics
Pfeiffer, W.; Frey, T. | Konferenzbeitrag |
| 2005 | Characterization of shot peened components by X-ray diffraction: A method on its way from the laboratory into industrial product development
Pfeiffer, W. | Konferenzbeitrag |
| 2005 | Determination of residual stresses in multipass weldments of high strength steels with experimental and numerical techniques
Memhard, D.; Pfeiffer, W.; Siegele, D. | Konferenzbeitrag |
| 2005 | Influences on the part quality in conventional deep drawing processes
Behrens, B.; Yun, J.; Schäffner, C.; Sundkötter, C.; Kröning, M.; Altpeter, I.; Kopp, M. | Konferenzbeitrag |
| 2005 | Magnetic characterization of cold rolled and aged AISI 304 stainless steel
Sagar, S.; Ravi Kumar, B.; Dobmann, G.; Bhattacharya, D. | Zeitschriftenaufsatz |
| 2005 | Micro-magnetic evaluation of residual stresses of the 2nd and 3rd order
Pirlog, M.; Szielasko, K.; Altpeter, I.; Dobmann, G.; Kröning, M. | Konferenzbeitrag |
| 2005 | Preventing contact loading induced surface failure of ceramic components by a shot peening treatment
Pfeiffer, W.; Frey, T. | Konferenzbeitrag |
| 2004 | Barkhausen noise and eddy current microscopy - a new scanning probe technique for microscale characterization of materials
Szielasko, K.; Lugin, S.; Kopp, M.; Altpeter, I. | Konferenzbeitrag |
| 2004 | Improved mechanical properties of metallic micro-structures
Schreiber, J.; Braun, S.; Gatto, A.; Schenk, H. | Konferenzbeitrag |
| 2004 | Increasing the static, cyclic and rolling load capacity of silicon nitride by shot peening
Frey, T.; Pfeiffer, W. | Konferenzbeitrag |
| 2004 | Strengthening of ceramics by shot peening
Pfeiffer, W.; Frey, T. | Konferenzbeitrag |
| 2003 | Experimental and theoretical investigation of R-curve behaviour in AL/AL2O3 functionally graded materials
Neubrand, A.; Chung, T.-J.; Rödel, J. | Zeitschriftenaufsatz |
| 2003 | Shot peening of ceramics: Damage or benefit?
Frey, T.; Pfeiffer, W. | Konferenzbeitrag |
| 2002 | Damage resistant and low stress EUV multilayer mirrors
Feigl, T.; Yulin, S.; Kuhlmann, T.; Kaiser, N. | Zeitschriftenaufsatz |
| 2002 | Neutron Diffraction Study of Plasticity-Induced Martensite Formation of the Austentic Stainless Steel AISI 321
Taran, Y.; Daymond, M.; Eifler, D.; Nebel, T.; Schreiber, J. | Konferenzbeitrag |
| 2002 | Parameterized FE-modeling and interfacial fracture toughness investigations towards reliability enhancements of advanced plastic packages
Auersperg, R.; Dudek, R.; Michel, B. | Konferenzbeitrag |
| 2002 | Shot peening of ceramics: Damage or benefit?
Pfeiffer, W.; Frey, T. | Zeitschriftenaufsatz |
| 2001 | Damage resistant and low stress EUV multilayer mirrors
Feigl, T.; Yulin, S.; Kuhlmann, T.; Kaiser, N. | Konferenzbeitrag |
| 2001 | Residual stress measurement of components by NDT
Dobmann, G. | Zeitschriftenaufsatz |
| 2001 | Ultrasonic Evaluation on Welding Stress State and Characterization of Microstructural State of Al-Welds
Schneider, E. | Konferenzbeitrag |
| 2000 | Detection of Cu-Precipitates in Steel by Micro-Magnetic Nondestructive Techniques
Dobmann, G.; Altpeter, I. | Konferenzbeitrag |
| 2000 | Micromagnetic Determination of Thermal-Induced Residual Stresses in Steel and White Cast Iron
Altpeter, I.; Becking, R.; Kern, R.; Kröning, M.; Hartmann, S. | Zeitschriftenaufsatz |
| 1999 | Cracking behavior of AIP-coated metal nitrides under tensile stress
Yamamoto, K.; Kawaguchi, Y.; Yasunaga, T.; Sato, T. | Zeitschriftenaufsatz |
| 1999 | Macroscopic and microscopic residual stresses in ceramics due to contact loading
Pfeiffer, W.; Rombach, M. | Konferenzbeitrag |
| 1999 | Residual stress states of graded CuW materials
Bokuchava, G.; Schreiber, J.; Shamsutdinov, N.; Stalder, M. | Konferenzbeitrag |
| 1999 | Schwingfestigkeit induktionsgehärteter Bauteile aus AFP-Stählen
Kaufmann, H.; Sonsino, C.M. | Zeitschriftenaufsatz |
| 1998 | Detection of Residual Stresses and Nodular Growth in Thin Ferromagnetic Layers with Barkhausen and Acoustic Microscopy
Altpeter, I.; Dobmann, G.; Meyendorf, N.; Fassbender, S.; Hoffmann, J.; Nichtl-Pecher, W.; Johnson, J. | Konferenzbeitrag |
| 1998 | Durability approval of leaf springs under operational loading
Fischer, G.; Streicher, M.; Grubisic, V. | Bericht |
| 1998 | Elektromagnetische und Ultraschallverfahren zur Spannungsanalyse an Bauteilen
Theiner, W.; Schneider, E.; Kern, R. | Konferenzbeitrag |
| 1998 | Gefügezustands- und Eigenspannungsanalyse mit Ultraschallverfahren. Ein Werkzeug der Qualitätssicherung von Aluminiumschweißnähten
Schneider, E.; Kröning, M. | Konferenzbeitrag |
| 1998 | Optimization of process parameters for induction heat treating by means of numerical simulation
Schöpfel, A.; Störzel, K. | Konferenzbeitrag |
| 1998 | Residual Stress Measurements in Front of a Crack Tip with High Spatial Resolution by Using Barkhausen Microscopy
Altpeter, I.; Dobmann, G.; Meyendorf, N.; Blumenauer, H.; Horn, D.; Krempe, M. | Konferenzbeitrag |
| 1998 | Study of Residual Stresses in a Stainless Steel Tube with a Welded Ferritic Cover by Neutron Diffraction
Taran, Y.; Kockelmann, H.; Schreiber, J.; Wright, J. | Konferenzbeitrag |
| 1998 | Ein Verfahren zur Bemessung elektronenstrahlgehärteter Randschichten unter Wälzbeanspruchung
Schöpfel, A. | Dissertation |
| 1997 | Barkhausen-Effect and Eddy Current Testing for the Characterization of the Microstructure and Residual Stress States with Local Resolution
Hoffmann, J.; Rouget, D.; Altpeter, I.; Bender, J.; Kopp, M. | Konferenzbeitrag |
| 1997 | Quantitative Evaluation of Thermally Induced Residual Stresses in White Cast Iron and Steels with Different Cementite Morphologies
Altpeter, I.; Kern, R.; Lang, M.A. | Konferenzbeitrag |
| 1997 | Review of investigations on aeronautical fatigue in the Federal Republic of Germany
Huth, H. | Tagungsband |
| 1996 | Influence of stress relieving by vibration on the fatigue behaviour of welded joints in comparison to post-weld heat treatment
Sonsino, C.M.; Müller, F.; Back, J. de; Gresnigt, A.M. | Zeitschriftenaufsatz |
| 1996 | On the springback-effect of CFRP-stringers. An experimental, analytical and numerical analysis
Stephan, A.; Schwinge, E.; Müller, J.; Öry, H. | Konferenzbeitrag |
| 1996 | Optimale Verfahrensparameter beim induktiven Randschichthärten durch rechnerische Simulation
Störzel, K.; Kaufmann, H. | Konferenzbeitrag |
| 1996 | Process integrated nondestructive testing of laser-hardened components
Kern, R.; Theiner, W.; Valeske, B.; Meyer, R. | Konferenzbeitrag |
| 1995 | Influence of annealing on elastic properties of LPCVD silicon nitride and LPCVD polysilicon
Maier-Schneider, D.; Ersoy, A.; Maibach, J.; Schneider, D.; Obermeier, E. | Zeitschriftenaufsatz |
| 1995 | Messungen der elastischen Anisotropie mit Ultraschallverfahren zur Spannungs- und Texturanalyse
Schneider, E. | Konferenzbeitrag |
| 1995 | Review of investigations on aeronautical fatigue in the Federal Republic of Germany
Huth, H. | Tagungsband |
| 1995 | Schwingfestigkeit von hochfesten Feinkornbaustählen im brenngeschnittenen Zustand
Kaufmann, H.; Sonsino, C.M.; Schönherr, W. | Zeitschriftenaufsatz |
| 1995 | Verwendung von Kohlenstoffasern zur Leistungssteigerung von Industriezentrifugen
Götte, T.; Idelberger, H.; Garbe, J.; Hochbein, H. | Zeitschriftenaufsatz |
| 1994 | Einfluß hoher Zugeigenspannungen auf das Langzeitschwingfestigkeitsverhalten N größer 10 hoch 7 von geschweißten Strukturen unter veränderlicher Amplitudenbelastung. Gebrauchseigenschaften und Betriebsverhalten
Müller, A.; Grubisic, V.; Theobalt, - | Buch |
| 1994 | Evaluation of second order residual stresses in iron carbon steels and white cast iron using micromagnetic methods
Altpeter, I.; Kern, R.; Meyendorf, N. | Konferenzbeitrag |
| 1994 | Features of notch preparation for fracture toughness measurements in partially stabilized zirconia.
Krell, A. | Zeitschriftenaufsatz |
| 1994 | Microscopic techniques for nondestructive characterization of material structures and measurement of local residual stresses with high resolution
Altpeter, I.; Meyendorf, N. | Konferenzbeitrag |
| 1994 | Quantitative evaluation of machined and laserhardened surfaces by x-ray and micromagnetic techniques
Kern, R.; Schneider, E.; Theiner, W. | Konferenzbeitrag |
| 1994 | Residual stress analysis in components of microsystems
Schubert, A.; Michel, B. | Konferenzbeitrag |
| 1994 | Residual stress in Ni and C monolayers and multilayers produced by pulsed laser deposition
Kallis, N.; Mai, H. | Konferenzbeitrag |
| 1994 | Theory vs. experiment in brittle composites - some reflections and examples
Weiss, H.-J. | Aufsatz in Buch |
| 1994 | Über den Einfluß von Eigenspannungen, Nahtgeometrie und mehrachsigen Spannungszuständen auf die Betriebsfestigkeit geschweißter Konstruktionen aus Baustählen
Sonsino, C.M. | Zeitschriftenaufsatz |
| 1994 | X-ray residual stress analysis in components of microsystem technology
Schubert, A.; Kämpfe, B.; Michel, B. | Konferenzbeitrag |
| 1994 | Zerstörungsfreie Bestimmung der Einhärtungstiefe nach dem Randschichthärten mit mikromagnetischen Prüfverfahren. Beispiel: Laserhärten
Kern, R.; Theiner, W.; Bergmann, H.W.; Müller, D.; Damaschek, R.; Rudlaff, T.; Bloehs, W. | Zeitschriftenaufsatz |
| 1993 | Determination of residual stress in a ceramic multilayer chip capacitor
Schubert, A.; Kämpfe, B.; Dudek, R.; Skurt, L. | Konferenzbeitrag |
| 1993 | Einfluß von Gefüge und Eigenspannungen auf das Ermüdungsverhalten von Laserhärtungsschichten.
Winderlich, B.; Schädlich, S.; Brenner, B.; Reitzenstein, W. | Konferenzbeitrag |
| 1993 | Evaluation des Etats de Contraintes dans des Composants industriels an moyen de techniques ultrasonores
Schneider, E.; Pierre, A. | Konferenzbeitrag |
| 1993 | Evaluation of residual stresses in a strongly textured saw blade for the production of silicon-wafers
Hauk, V.; Derycke, Pascal; Theiner, Werner Alfred | Konferenzbeitrag |
| 1993 | Evaluation of thermally induced residual stresses in white cast iron and iron-carbon steel.
Altpeter, I.; Kern, R.; Kröning, M. | Konferenzbeitrag |
| 1993 | Fraunhofer-Institut für Betriebsfestigkeit. Tätigkeitsbericht 1992
| Jahresbericht |
| 1993 | Influence of stress-relieving by vibration as compared with post-weld heat treatment on the fatigue behaviour of repair welds
Back, J. de; Gresnigt, A.M.; Müller, F.; Sonsino, C.M. | Buch |
| 1993 | Methoden zur Optimierung von Festigkeit und Lebensdauer thermisch gespritzter Werkstoffverbunde
Pantucek, P. | Konferenzbeitrag |
| 1993 | Non-destructive measurement and analysis of residual stress in and around welds - A state of the art survey
Dobmann, G. | Zeitschriftenaufsatz |
| 1993 | Reliability assurance of railroad wheels by ultrasonic stress analysis
Schneider, E.; Bruche, D.; Frotscher, H.; Herzer, H.-R. | Konferenzbeitrag |
| 1993 | Review of investigations on aeronautical fatigue in the Federal Republic of Germany
Buxbaum, O.; Schöpfel, A. | Tagungsband |
| 1993 | Schwingfestigkeit von hochfesten Feinkornbaustählen im brenngeschnittenen Zustand. Forschungsbericht.
Sonsino, C.M.; Kaufmann, H.; Müller, F.; Berghöfer, U. | Buch |
| 1993 | Thermal damage by erosion and cracking under pulsed irradiation.
Schultrich, B.; Weiss, H.-J.; Bahr, H.-A. | Konferenzbeitrag |
| 1993 | X-ray analysis of residual stress gradients and textures in thin coatings
Schubert, A.; Kämpfe, B.; Auerswald, E.; Michel, B. | Konferenzbeitrag |
| 1993 | X-ray analysis of residual stress gradients and textures in thin coatings
Schubert, A.; Kämpfe, B.; Auerswald, E. | Zeitschriftenaufsatz |
| 1993 | X-ray-investigations of platinum layers on dense construction ceramics with regard to residual stresses and stressfree lattice constants.
Große, G.; Taut, C.; Stephan, D. | Konferenzbeitrag |
| 1992 | Härte- und Eigenspannungsmessungen an Niederdruckturbinenschaufeln
Stücker, E.; Theiner, W. | Konferenzbeitrag |
| 1992 | The improvement of fatigue behaviour of sintered steels by surface rolling
Müller, F.; Müller, R.; Sonsino, C.M. | Zeitschriftenaufsatz |
| 1992 | Über den Einfluß von Eigenspannungen, Nahtgeometrie und mehrachsigen Spannungszuständen auf die Betriebsfestigkeit geschweißter Konstruktionen aus Baustählen.
Sonsino, C.M. | Aufsatz in Buch |
| 1992 | UT by electromagnetic transducers - state of technology and applications in industry
Höller, P.; Salzburger, H.J. | Konferenzbeitrag |
| 1992 | Zur Bemessung geschmiedeter Bauteile mit Hilfe des örtlichen Dehnungskonzeptes.
Grubisic, V.; Rupp, A. | Buch |
| 1991 | Detectability of defects in reactor pressure components by location and interpretation of AE-sources
Sklarczyk, C.; Waschkies, E. | Konferenzbeitrag |
| 1991 | Influence of grinding on near-surface regions of high-strength ceramics. Characterization by X-ray diffraction and effect on strength.
Pfeiffer, W. | Aufsatz in Buch |
| 1991 | Zerstörungsfreie Charakterisierung des Zähigkeitsverhaltens mit mikromagnetischen Meßgrößen
Kern, R.; Theiner, W. | Konferenzbeitrag |
| 1990 | Berücksichtigung einsatztypischer Klimabedingungen bei der Festigkeitsuntersuchung von Faserverbundwerkstoffen
Berg, M. | Konferenzbeitrag |
| 1990 | Influence of machining-induced residual stresses on the strength of ceramics
Pfeiffer, W. | Konferenzbeitrag |
| 1990 | Utjecaj zaostalog naprezanja na zamor zavarenih konstrukcija
Domazet, Z.; Grubisic, V. | Zeitschriftenaufsatz |
| 1989 | The 3MA-testing equipment, application possibilities and experiences
Gessner, M.; Kopp, H.; Reimringer, B.; Theiner, W.A. | Konferenzbeitrag |
| 1988 | Evaluation of residual stress states in welded parts - Using ultrasonic techniques
Schneider, E. | Aufsatz in Buch |
| 1988 | Nondestructive residual stress- and hardness-evaluation at weldments by means of 3MA. Micromagnetic- multiparameter-, microstructure- and stress-analysis
Dobmann, G.; Reimringer, B.; Theiner, W. | Konferenzbeitrag |
| 1988 | Reasons for crack closure and possibilities for detection and sizing by NDE
Deuster, G. | Zeitschriftenaufsatz |