Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Reactive inkjet printing of polyethylene glycol and isocyanate based inks to create porous polyurethane structures
Schuster, Fabian; Hirth, Thomas; Weber, Achim
Zeitschriftenaufsatz
2018Applicability of photonic sintering and autoclaving as alternative contact formation methods for silicon solar cells with passivating contacts
Schube, J.; Fellmeth, T.; Maier, F.; Keding, R.; Clement, F.; Glunz, S.W.
Konferenzbeitrag
2018Influence of Interconnection Concepts for IBC Solar Cell Performance by Simulation
Huyeng, J.D.; Spribille, A.; Rendler, L.C.; Ebert, C.; Eitner, U.; Keding, R.
Konferenzbeitrag
2018Low-Resistivity Screen-Printed Contacts on Indium Tin Oxide Layers for Silicon Solar Cells with Passivating Contacts
Schube, J.; Tutsch, L.; Fellmeth, T.; Bivour, M.; Feldmann, F.; Hatt, T.; Maier, F.; Keding, R.; Clement, F.; Glunz, S.W.
Zeitschriftenaufsatz
2018Printed Dopant Sources for Locally-Doped SiOx/Poly-Si Passivating Contacts
Kiaee, Z.; Reichel, C.; Feldmann, F.; Jahn, M.; Huyeng, J.D.; Keding, R.; Hermle, M.; Clement, F.
Konferenzbeitrag
2017Challenges for lowly-doped phosphorus emitters in silicon solar cells with screen-printed silver contacts
Werner, S.; Lohmüller, E.; Maier, S.; Mourad, S.; Wolf, A.
Zeitschriftenaufsatz, Konferenzbeitrag
2017High throughput printing for highly efficient cost-effective Si solar cells
Clement, F.; Lorenz, A.; Pospischil, M.; Biro, D.; Brocker, H.; Bangel, D.; Greutmann, R.; Lehner, M.; Ott, T.; Hage, F.; Oppelt, K.; Honold, T.; Wende, L.; Ringel, M.; Senne, A.; Rohde, J.; Preu, R.
Konferenzbeitrag
2017Investigations of a catalyst system regarding the foamability of polyurethanes for reactive inkjet printing
Schuster, Fabian; Ngako Ngamgoue, Fabrice; Götz, Tobias; Hirth, Thomas; Weber, Achim; Bach, Monika
Zeitschriftenaufsatz
2017Nanoscale patterning of self-assembled monolayer (SAM)-functionalised substrates with single molecule contact printing
Sajfutdinow, Martin; Uhlig, Katja; Prager, Andrea; Schneider, C.; Abel, Bernd; Smith, David M.
Zeitschriftenaufsatz
2017Synthesis, formulation, rapid curing of particle-based inkjet/aerosol-jet printed films for electronic and sensory devices
Fritsch, Marco; Vinnichenko, Mykola; Sauchuk, Viktar; Trofimenko, Nikolai
Poster
2016Flexo-printed busbarless solar cells for multi-wire interconnection
Lorenz, A.; Gredy, C.; Senne, A.; Beyer, S.; Yao, Y.; Papet, P.; Ufheil, J.; Reinecke, H.
Zeitschriftenaufsatz, Konferenzbeitrag
2016Flexographic printing - towards an advanced front side metallization approach with high throughput and low silver consumption
Lorenz, A.; Gredy, C.; Beyer, S.; Yao, Y.; Papet, P.; Ufheil, J.; Senne, A.; Reinecke, H.; Clement, F.
Zeitschriftenaufsatz
2016Fully organic Aerosoljet printed piezoelectric sensor
Starruß, Elisa; Greifzu, Moritz; Roch, Aljoscha; Dani, Ines; Leyens, Christoph
Poster
2016Influence of surface near doping concentration on contact formation of silver thick film contacts
Rothhardt, P.; Meier, S.; Hoenig, R.; Wolf, A.; Biro, D.
Zeitschriftenaufsatz
2016Investigation of the thermoelectric power factor of KOH-treated PEDOT:PSS dispersions for printing applications
Stepien, Lukas; Roch, Aljoscha; Schlaier, Sarah; Dani, Ines; Kiriy, Anton; Simon, Frank; Lukowicz, Marian v.; Leyens, Christoph
Zeitschriftenaufsatz
2016Progress in polymer thermoelectrics
Stepien, Lukas; Roch, Aljoscha; Tkachov, Roman; Gedrange, Tomasz
Aufsatz in Buch
2016Universal lab-on-a-chip platform for complex, perfused 3D cell cultures
Sonntag, Frank; Schmieder, Florian; Ströbel, Joachim; Grünzner, Stefan; Busek, Mathias; Steege, Tobias; Polk, Christoph; Klotzbach, Udo; Günther, K.
Konferenzbeitrag
2015Comprehensive comparison of different fine line printing technologies addressing the seed and plate approach with Ni-Cu-plating
Lorenz, A.; Kraft, A.; Gredy, C.; Filipovic, A.; Binder, S.; Krüger, K.; Bartsch, J.; Clement, F.; Biro, D.; Preu, R.; Reinecke, H.
Konferenzbeitrag
2015Evaluation of flexographic printing technology for multi-busbar solar cells
Lorenz, A.; Senne, A.; Rohde, J.; Kroh, S.; Wittenberg, M.; Krüger, K.; Clement, F.; Biro, D.
Zeitschriftenaufsatz, Konferenzbeitrag
2015Evaluation of screen-printed metallization concepts for large-area BC-BJ solar cells
Hendrichs, M.; Padilla, M.; Walter, J.; Clement, F.; Fell, A.; Rech, B.
Konferenzbeitrag
2014Optimized aerosol jet printed silver contacts on lowly doped phosporous and boron emitters
Binder, S.; Schmiga, C.; Glatthaar, M.; Glunz, S.W.
Konferenzbeitrag
2013Fine-line silver pastes for seed layer screen printing with varied glass content
Olweya, S.; Kalio, A.; Kraft, A.; Deront, E.; Filipovic, A.; Bartsch, J.; Glatthaar, M.
Zeitschriftenaufsatz, Konferenzbeitrag
2013Flexographic printing - high throughput technology for fine line seed layer printing on silicon solar cells
Lorenz, A.; Kalio, A.; Hofmeister, G.; Nold, S.; Kraft, A.; Bartsch, J.; Wolf, D.; Dreher, M.; Clement, F.; Biro, D.
Konferenzbeitrag
2013The nature of screen printed front side silver contacts - results of the Project MikroSol
Hönig, R.; Dürrschnabel, M.; Mierlo, W. van; Aabdin, Z.; Bernhard, J.; Biskupek, J.; Eibl, O.; Kaiser, U.; Wilde, J.; Clement, F.; Biro, D.
Zeitschriftenaufsatz, Konferenzbeitrag
2003High-power diode-laser-bars with 19 up to 48 individually addressable emitters
Roehner, M.; Boenig, N.; Boucke, K.; Poprawe, R.
Konferenzbeitrag
1999Wirtschaftliche Aspekte des Einsatzes von CIP3 PPF -Vernetzt-
Schwarz, M.
Zeitschriftenaufsatz
1998Specification of the CIP3 Print Production Format (Version 3.0)
Daun, S.; Lucas, G.; Schönhut, J.
Buch
1997Specification of the CIP3 Print Production Format (Version 2.1)
Daun, S.; Lucas, G.; Schönhut, J.
Bericht
1996Specification of the CIP3 Print Production Format (Version 2.0)
Daun, S.; Lucas, G.; Schönhut, J.
Bericht
1995Specification of the CIP3 Print Production Format
Daun, S.; Lucas, G.; Schönhut, J.
Bericht
1993Comparing innerliner aroma and water vapour barrier properties
Lindner-Steinert, A.
Zeitschriftenaufsatz
1992Market potential of broadband communication in the printing and publishing sector
Hudetz, W.; Rachor, U.; Weisbrod, H.
Aufsatz in Buch
1992Vergleich der Aromadurchlässigkeit von Zigaretteninnenwicklern aus Aluminium/Papier-Verbund, metallisiertem Papier und bedrucktem Papier
Lindner-Steinert, A.; Piringer, O.G.
Zeitschriftenaufsatz
1991Marktpotential Breitbandkommunikation im Sektor Druck und Verlage
Hudetz, W.; Rachor, U.; Weisbrod, H.
Aufsatz in Buch