| | |
|---|
| 2017 | Applications of metal foam as catalyst carrier
Walther, Gunnar; Gaitzsch, Uwe; Büttner, Tilo; Kieback, Bernd; Weißgärber, Thomas; Kolvenbach, Robin; Lincke, Marc | Konferenzbeitrag |
| 2016 | On- and offline ultrasonic characterization of components built by SLM additive manufacturing
Rieder, Hans; Spies, Martin; Bamberg, Joachim | Konferenzbeitrag |
| 2014 | Microcladding of hypereutectic Al-Si alloys: technological aspects and structure features
Grigoriev, Sergej Nikolaevich; Tarasova, Tatyana Vasilievna; Gvozdeva, Galina Olegovna; Nowotny, Steffen | Zeitschriftenaufsatz |
| 2014 | Structure formation of hypereutectic Al-Si-alloys produced by laser surface treatment
Grigoriev, Sergey Nikolaevich; Tarasova, Tatyana Vasilievna; Gvozdeva, Galina Olegovna; Nowotny, Steffen | Zeitschriftenaufsatz |
| 2008 | Ionenstrahlpräparation - ein treffliches Werkzeug zur Charakterisierung der Zwischenprodukte des schmelzpulvermetallurgischen Aluminiumschäumverfahrens
Hohlfeld, J.; Lies, C.; Höhn, S.; Obenaus, P. | Zeitschriftenaufsatz |
| 2008 | Rolling contact fatigue of HVOF-sprayed WC-based hardmetal coatings
Lipp, K.; May, U.; Berger, L.-M.; Jordan, C. | Konferenzbeitrag |
| 2007 | Evaluation of the fatigue behaviour of new PM-materials for highly loaded gears
Lipp, K.; Bender, H.J.; Baumgaertner, F.; Castro Pinto, F.; Sonsino, C.M. | Konferenzbeitrag |
| 2007 | Pulvermetallurgie
Reschke, S. | Zeitschriftenaufsatz |
| 2007 | Pulvermetallurgie
Reschke, S. | Zeitschriftenaufsatz |
| 2006 | Fatigue design principles for sintered steel components
Sonsino, C.M. | Zeitschriftenaufsatz |
| 2005 | Fatigue design of PM-gears under consideration of herzian pressure with sliding and tooth bending
Sonsino, C.; Lipp, K. | Tagungsband |
| 2005 | Werkstofftrends: Pulvermetallurgie
Reschke, S.; Kohlhoff, J.; Notthoff, C.; Kretschmer, T. | Zeitschriftenaufsatz |
| 2004 | Design of PM-gears basing on local bending and rolling contact fatigue data
Lipp, K. | Konferenzbeitrag |
| 2004 | Static and fatigue properties of cold and warm compacted Alumix 431 alloy (Al-5.5 Zn-2.5 Mg-1.5 Cu)
Eksi, A.; Velti, G.; Petzoldt, F.; Lipp, K.; Sonsino, C.M. | Konferenzbeitrag |
| 2004 | Tensile and fatigue properties of cold and warm compacted Alumix 431 alloy
Eksi, A.; Veltl, G.; Petzoldt, F.; Lipp, K.; Sonsino, C.M. | Zeitschriftenaufsatz |
| 2003 | Design for roling contact fatigue
Lipp, K.; Hoffmann, G. | Zeitschriftenaufsatz |
| 2003 | Fatigue design concepts for P/M parts and required material data
Sonsino, C.M. | Buch |
| 2003 | Parameters influencing the fatigue strength of PM Steel components
Sonsino, C.M. | Tagungsband |
| 2003 | Processing techniques for functionally graded materials
Kieback, B.; Neubrand, A.; Riedel, H. | Zeitschriftenaufsatz |
| 2002 | Substitution of conventionally double pressed and double sintered synchronizer hubs by warm powder compaction
Ratzi, R.; Sonsino, C.M. | Konferenzbeitrag |
| 2001 | Influence of notches on fatigue strength of high performance PM materials
Engström, U.; Lipp, K.; Sonsino, C.M. | Konferenzbeitrag |
| 2000 | Cost reduction by using new Ni-free PM steels
Lipp, K.; Bas, J.; Blanchard, C.; Johansson, M.; Baum, U. | Konferenzbeitrag |
| 1999 | Fatigue behaviour of sintered materials and components under operational service
Sonsino, C.M. | Konferenzbeitrag |
| 1999 | Kostenreduzierung durch nickelfreie Sinterstähle
Lipp, K.; Baum, U. | Konferenzbeitrag |
| 1999 | Rolling contact fatigue properties of selected PM-materials for gear-box applications
Sonsino, C.M.; Lipp, K. | Bericht |
| 1999 | Rolling contact fatigue. Component design and testing for P/M applications
Hoffmann, G.; Sonsino, C.M.; Michaelis, K. | Bericht |
| 1998 | Development of corrosion. Fatigue resistant diffusion. Bonded pump impellers from stainless PM steels
Sonsino, C.M.; Zieschang, R.; Arnhold, V.; Sandritter, H.H.; Gonia, D. | Konferenzbeitrag |
| 1998 | Development of diffusion - bonded pump impellers made from a corrosion - fatigue resistant PM' steel
Sonsino, C.M.; Zieschang, R.; Hofmann, B.; Molinari, A.; Sandritter, K.H.; Persson, M. | Bericht |
| 1998 | Fatigue behaviour of sintered materials and components under operational service
Sonsino, C.M. | Konferenzbeitrag |
| 1998 | Fatigue design. Testing, quality reliability and safety on the example of automotive PM' components
Sonsino, C.M. | Konferenzbeitrag |
| 1998 | Materials technology drives impeller design
Sonsino, C.M. | Zeitschriftenaufsatz |
| 1998 | Metal foaming by a powder metallurgical method. Production, properties and applications
Yu, C.J.; Eifert, H.; Banhart, J.; Baumeister, J. | Zeitschriftenaufsatz |
| 1998 | PM looks forward to pump impeller role
Sonsino, C.M.; Zieschang, R.; Arnhold, V.; Hofmann, B.; Gonia, D.; Sandritter, K.H. | Zeitschriftenaufsatz |
| 1997 | Aluminiumschäume und ihre Eigenschaften
Weber, M.; Baumeister, J.; Banhart, J. | Konferenzbeitrag |
| 1997 | Competitive advantages by near-net-shape manufacturing. Papers presented at the Conference NNS '97
: Kunze, H.-D. | Tagungsband |
| 1997 | Effect of process parameters on the microstructure and properties of TiC dispersion strengthened copper alloys
Weißgärber, T.; Sauer, C.; Püsche, W.; Kieback, B.; Dehm, G.; Mayer, J. | Konferenzbeitrag |
| 1997 | Evaluation of different approaches for the production of highly porous steel
Weber, M.; Knuewer, M. | Konferenzbeitrag |
| 1997 | Fatigue design. Testing, quality reliability and safety on the example of automotive PM' components
Sonsino, C.M. | Konferenzbeitrag |
| 1997 | Simultaneous Engineering am Beispiel der Entwicklung von gesinterten Fahrzeugpleueln
Sonsino, C.M.; Hoffmann, E.; Arnhold, V. | Konferenzbeitrag |
| 1997 | Überblick: Verfahren zur Herstellung von Metallschäumen
Baumeister, J. | Konferenzbeitrag |
| 1996 | Development of high-strength P/M steels with optimized microstructure by new alloying and sintering techniques
Brandt, U.; Sonsino, C.M.; Engström, U.; Ernst, E.; Hoffmann, E. | Konferenzbeitrag |
| 1996 | Fatigue design of high loaded PM parts. Part 1
Sonsino, C.M. | Zeitschriftenaufsatz |
| 1996 | Fatigue design of high loaded PM parts. Part 2
Sonsino, C.M. | Zeitschriftenaufsatz |
| 1996 | How sintering time and temperature influence fatigue
Lindner, K.-H.; Sonsino, C.M. | Aufsatz in Buch |
| 1996 | Pressing and sintering in powder technology
Riedel, H. | Konferenzbeitrag |
| 1995 | Binder design and process control for high performance MIM-materials
Petzoldt, F.; Eifert, H.; Hartwig, T.; Veltl, G. | Konferenzbeitrag |
| 1995 | Challenges for metal injection molding technology
Petzoldt, F.; Eifert, H.; Hartwig, T.; Veltl, G. | Konferenzbeitrag |
| 1995 | Neuere Entwicklungen beim Metallpulverspritzguß
Petzoldt, F.; Eifert, H.; Hartwig, T.; Veltl, G. | Konferenzbeitrag |
| 1995 | Rapid metal tooling
Klocke, F.; Celiker, T.; Song, Y.-A. | Konferenzbeitrag |
| 1995 | Ultrafeine Pulver - Herstellung, Verarbeitung und Anwendungen
Günther, B.; König, T.; Meisel, R.L. | Konferenzbeitrag |
| 1994 | Einfluß der Sinterzeit und -temperatur auf das Schwingfestigkeitsverhalten des diffusionslegierten Sinterstahls Fe-4.0 Prozent Ni-1.5 Prozent Cu-0.5 Prozent Mo plus 0.6 Prozent C.
Lindner, K.-H.; Sonsino, C.M. | Zeitschriftenaufsatz |
| 1994 | Fatigue design for PM components. Manual for design and production engineers.
Esper, F.J.; Sonsino, C.M. | Buch |
| 1994 | Finite Element Simulation für HIP-Bauteile
Petzoldt, F.; Khazami-Zahdeh, M. | Aufsatz in Buch |
| 1994 | Highly porous materials and parts by P/M technology
Kunze, H.D.; Hartwig, T.; Veltl, G. | Konferenzbeitrag |
| 1994 | How sintering time and temperature influence fatigue
Lindner, K.-H.; Sonsino, C.M. | Zeitschriftenaufsatz |
| 1994 | How sintering time and temperature influence fatigue
Lindner, K.-H.; Sonsino, C.M. | Konferenzbeitrag |
| 1994 | Investigation of binders for MIM of titanium
Kunze, H.-D.; Hartwig, T.; Veltl, G. | Konferenzbeitrag |
| 1994 | Metallschaum - ein Werkstoff mit Perspektiven
Banhart, J.; Baumeister, J.; Weber, M. | Zeitschriftenaufsatz |
| 1994 | Metallschaum - neuer Werkstoff mit Potential
Banhart, J.; Baumeister, J.; Weber, M. | Zeitschriftenaufsatz |
| 1994 | Metallschaum wird industrietauglich
Banhart, J.; Baumeister, J.; Weber, M. | Zeitschriftenaufsatz |
| 1994 | Metallschäume
Weber, M.; Baumeister, J.; Banhart, J. | Zeitschriftenaufsatz |
| 1994 | Methods for the production of metallic foams
Weber, M.; Baumeister, J.; Banhart, J.; Kunze, H.-D. | Konferenzbeitrag |
| 1994 | Numerical simulation of die pressing and sintering - development of constitutive equations
Riedel, H.; Meyer, D.; Svoboda, J.; Zipse, H. | Zeitschriftenaufsatz |
| 1994 | Numerical simulation of die pressing and sintering-development of constitutive equations
Riedel, H.; Svoboda, J.; Zipse, H. | Konferenzbeitrag |
| 1994 | Schwingfestigkeit des diffusionslegierten Sinterstahls Fe-4.0%Ni-1.5%Cu-0.5%Mo+0.6%C in Abhängigkeit von der Sinterzeit und -Temperatur.
Sonsino, C.M. | Buch |
| 1994 | Selected mechanical and physical properties of metal foams
Weber, M.; Baumeister, J.; Banhart, J.; Kunze, H.-D. | Konferenzbeitrag |
| 1993 | Mechanical alloying reduces wear of self-lubricating materials
Günther, B.; Kunze, H.-D.; Veltl, G.; Takahashi, K. | Zeitschriftenaufsatz |
| 1993 | P/M technology for the production of metal foams
Kunze, H.-D.; Baumeister, J.; Banhart, J.; Weber, M. | Zeitschriftenaufsatz |
| 1993 | Possibilities for the production of components of metal foams
Kunze, H.-D.; Baumeister, J.; Banhart, J.; Weber, M. | Aufsatz in Buch |
| 1993 | Preparation of nanostructured materials by PM methods
Günther, B. | Konferenzbeitrag |
| 1993 | Preparation of self-lubricating wear resistant materials by mechanical alloying
Günther, B.; Kunze, H.-D.; Veltl, G.; Takahashi, K. | Konferenzbeitrag |
| 1993 | Thermal stability of ultrafine grained and nanocrystalline metals
Kumpmann, A.; Günther, B.; Kunze, H.-D. | Konferenzbeitrag |
| 1992 | Improvement of mechanical properties of diffusion- and prealloyed sintered steels by heat treatments.
Sonsino, C.M.; Schlieper, G. | Zeitschriftenaufsatz |
| 1992 | Investigations of different stainless steel MIM feedstocks with a novel binder system
Petzoldt, F.; Veltl, G.; Kunze, H.-D.; Seidel, R. | Konferenzbeitrag |
| 1991 | Present level of knowledge on fatigue strength of sintered steels
Sonsino, C.M. | Konferenzbeitrag |
| 1991 | Schwingfestigkeit von Verschraubungen aus Sinterwerkstoffen
Lipp, K. | Buch |
| 1990 | Development of sintered con-rods for automotive engines
Richter, K.; Lawcock, R.; Whittaker, D.; Schlieper, G.; Tengzelius, J.; Lipp, K.; Sonsino, C.M. | Konferenzbeitrag |
| 1990 | Evaluation of different heat treatment methods for fatigue design of notched and differently loaded PM' parts
Esper, F.J.; Sonsino, C.M. | Konferenzbeitrag |
| 1990 | Fatigue design for powder metallurgy
Sonsino, C.M. | Konferenzbeitrag |
| 1990 | Fatigue design for powder metallurgy
Sonsino, C.M. | Zeitschriftenaufsatz |
| 1990 | Fatigue design for powder metallurgy
Sonsino, C.M. | Zeitschriftenaufsatz |
| 1990 | Influence of As-sintered material strength on the improvement of fatigue behaviour by surface rolling
Tengzelius, J.; Schlieper, G.; Sonsino, C.M. | Konferenzbeitrag |
| 1981 | Characteristic properties of powder metallurgical materials relevant to fatigue design
Esper, F.J.; Leuze, G.; Sonsino, Cetin Morris | Zeitschriftenaufsatz |