Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2018Analysis of the 3D draping behavior of carbon fiber non-crimp fabrics with eddy current technique
Bardl, Georg; Nocke, Andreas; Hübner, Matthias; Gereke, Thomas; Pooch, Matthias; Schulze, Martin; Heuer, Henning; Schiller, Marko; Kupke, Richard; Klein, Marcus; Cherif, Chokri
Zeitschriftenaufsatz
2018Combination of electromagnetic measurements and FEM simulations for nondestructive determination of mechanical hardness
Gabi, Yasmine; Martins, Olivier; Wolter, Bernd; Straß, Benjamin
Zeitschriftenaufsatz
2018Fracture analysis of a metal to CFRP hybrid with thermoplastic interlayers for interfacial stress relaxation using in situ thermography
Summa, Jannik; Becker, Michael; Grossmann, Felix; Pohl, Markus; Stommel, Markus; Herrmann, Hans-Georg
Zeitschriftenaufsatz
2018Investigation of the foam development stages by non-destructive testing technology using the freeze foaming process
Maier, Johanna; Behnisch, Thomas; Geske, Vinzenz; Ahlhelm, Matthias; Werner, David; Moritz, Tassilo; Michaelis, Alexander; Gude, Maik
Zeitschriftenaufsatz
2018Laser Ultrasound as a tool for the characterisation of electromagnetic welded joints
Hofer, Christian; Meier, Klarissa; Psyk, Verena; Faes, Koen; Scherleitner, Edgar; Reitinger, Bernhard
Vortrag
2018Nondestructive evaluation of low-velocity impact-induced damage in basalt-carbon hybrid composite laminates using eddy current-pulsed thermography
Zhang, Hai; Sfarra, Stefano; Osman, Ahmad; Sarasini, Fabrizio; Netzelmann, Udo; Valeske, Bernd; Avdelidis, Nicolas P.; Ibarra-Castanedo, Clemente; Maldague, Xavier P.V.
Zeitschriftenaufsatz
2018Predictive quality control of hybrid metal-CFRP components using information fusion
Berger, Dietrich; Zaiß, Marielouise; Lanza, Gisela; Summa, Jannik; Schwarz, Michael; Herrmann, Hans-Georg; Pohl, Markus; Günther, Fabian; Stommel, Markus
Zeitschriftenaufsatz
2017Calibration of thermographic spot weld testing with X-ray computed tomography
Myrach, Philipp; Jonietz, Florian; Meinel, Dietmar; Suwala, Hubert; Ziegler, Mathias
Zeitschriftenaufsatz
2017New developments in ultrasonic materials characterization at Fraunhofer Institute for NDT, IZFP
Veile, Ines; Weikert-Müller, Miriam; Rabe, Ute; Szielasko, Klaus
Zeitschriftenaufsatz
2017Non-destructive characterization of fiber orientation in reinforced SMC as input for simulation based design
Schladitz, Katja; Büter, Andreas; Godehardt, Michael; Wirjadi, Oliver; Fleckenstein, Johanna; Gerster, Tobias; Hassler, Ulf; Jaschek, Katrin; Maisl, Michael; Maisl, Ute; Mohr, Stefan; Netzelmann, Udo; Potyra, Tobias; Steinhauser, Martin O.
Zeitschriftenaufsatz
2017Sparse signal recovery for ultrasonic detection and reconstruction of shadowed flaws
Kirchhof, Jan; Krieg, Fabian; Römer, Florian; Ihlow, Alexander; Osman, Ahmad; Galdo, Giovanni del
Konferenzbeitrag
2016Automated detection of yarn orientation in 3D-draped carbon fiber fabrics and preforms from eddy current data
Bardl, Georg; Nocke, Andreas; Cherif, Chokri; Pooch, Matthias; Schulze, Martin H.; Heuer, Henning; Schiller, Marko; Kupke, Richard; Klein, Marcus
Zeitschriftenaufsatz
2016Potential improvements of the presently applied in-service inspection of wheelset axles
Kappes, Wolfgang; Hentschel, Dieter; Oelschlägel, Thomas
Zeitschriftenaufsatz
2016Testing ultrasonic SH waves to estimate the quality of adhesive bonds in small hybrid structures
Quirin, Steven; Neuhaus, Selina; Herrmann, Hans-Georg
Konferenzbeitrag
2015Development and test of a micromagnetic sensor principle for the characterization of non-ferromagnetic materials
Gupta, Bhaawan
Master Thesis
2015New approaches in nondestructive characterisation of defects in metal - CFRP hybrids
Schwarz, Michael; Summa, Jannik; Quirin, Steven; Herrmann, Hans-Georg
Konferenzbeitrag
2015Process monitoring for resins, carbon fiber fabrics, preforms and consolidated CFRPs by HF radio wave techniques
Heuer, Henning; Schulze, Martin; Pooch, Matthias; Gäbler, Simone; Kupke, Richard
Konferenzbeitrag
2015Review on quality assurance along the CFRP value chain - non-destructive testing of fabrics, preforms and CFRP by HF radio wave techniques
Heuer, Henning; Schulze, Martin; Pooch, Matthias; Gäbler, Simone; Nocke, Andreas; Bardl, Georg; Cherif, Chokri; Klein, Marcus; Kupke, Richard; Vetter, Richard; Lenz, Florian; Kliem, M.; Bülow, C.; Goyvaerts, J.; Mayer, T.; Petrenz, S.
Zeitschriftenaufsatz
2015Some background of monitoring and NDT also useful for timber structures
Kurz, Jochen Horst; Boller, Christian
Zeitschriftenaufsatz
2015Zero defect manufacturing: Detection of cracks and thinning of material during deep drawing processes
Zoesch, Antje; Wiener, Thomas; Kuhl, Michael
Zeitschriftenaufsatz, Konferenzbeitrag
2014Analysis of microstructural changes during high temperature exposure by means of non-destructive micro-magnetic methods
Rabung, Madalina; Kuhn, Bernd
Konferenzbeitrag
2014Electromagnetic examination of hardened depth of steel using 2D nonlinear hysteresis FEM analysis
Gabi, Yasmine; Wolter, Bernd; Martins, Olivier; Gerbershagen, Andreas
Konferenzbeitrag
2014Examination of micro- and nanostructures of magnetic and piezoelectric materials in relation to their macroscopic properties by dynamic scanning force microscopy techniques
Batista, Leonardo
Dissertation
2014On the mechanism of nondestructive evaluation of cementite content in steels using a combination of magnetic Barkhausen noise and magnetic force microscopy techniques
Batista, Leonardo; Rabe, Ute; Altpeter, Iris; Hirsekorn, Sigrun; Dobmann, Gerd
Zeitschriftenaufsatz
2014Theoretical description of ultrasonic propagation and scattering phenomena in polycrystalline structures aiming for simulations on nondestructive materials characterization
Hirsekorn, Sigrun
Konferenzbeitrag
2013Characterization of the magnetic micro- and nanostructure in unalloyed steels by magnetic force microscopy
Batista, Leonardo; Rabe, Ute; Hirsekorn, Sigrun
Konferenzbeitrag
2013Magnetic micro- and nanostructures of unalloyed steels: Domain wall interactions with cementite precipitates observed by MFM
Batista, Leonardo; Rabe, Ute; Hirsekorn, Sigrun
Zeitschriftenaufsatz
2013Potenzial von Infrarotthermographie zur Detektion von Insektenstadien und -schäden in Jungbäumen
Hoffmann, N.; Schröder, T.; Schlüter, F.; Meinlschmidt, P.
Zeitschriftenaufsatz
2013Quality control of resistance spot welding of high strength steels
Neugebauer, Reimund; Wiener, Thomas; Zösch, Antje
Konferenzbeitrag, Zeitschriftenaufsatz
2013Smart sensing in the light of non-destructive testing and structural health monitoring
Boller, Christian; Dobmann, Gerd; Frankenstein, Bernd
Zeitschriftenaufsatz
2012Improved defect detection with combined shearography and thermography
Schmidt, Wolfgang
Konferenzbeitrag
2012Nonlinear ultrasonic testing of carbon fibre reinforced plastics in the very high cycle fatigue regime
Rabe, Ute; Helfen, Thomas Benedikt; Weikert, Miriam; Hirsekorn, Sigrun; Herrmann, Hans-Georg; Boller, Christian; Backe, Daniel; Balle, Frank; Eifler, Dietmar
Zeitschriftenaufsatz, Konferenzbeitrag
2011Electromagnetism as a means for understanding materials mechanics phenomena in magnetic materials
Boller, Christian; Altpeter, Iris; Dobmann, Gerd; Rabung, Madalina; Schreiber, J.; Szielasko, Klaus; Tschuncky, Ralf
Zeitschriftenaufsatz
2011Virtual reality in planning of non-destructive testing solutions
Avgoustinov, Nicolai; Boller, Christian; Dobmann, Gerd; Wolter, Bernd
Konferenzbeitrag
2010Automated Systems for In-Service Non-Destructive Testing of Railroad Wheels and Axles
Kappes, W.; Bähr, W.; Salzburger, H.-J.; Walte, F.
Konferenzbeitrag
2010Development of automated non-destructive evaluation (NDE) systems for reinforced concrete structures and other applications
Dobmann, G.; Kurz, J.H.; Taffe, A.; Streicher, D.
Aufsatz in Buch
2010New NDT - approaches to monitor the friction stir welding process and to inspect the welding quality
Wolter, B.; Jene, T.; Conrad, C.; Dobmann, G.
Zeitschriftenaufsatz, Konferenzbeitrag
2010New NDT - approaches to monitor the friction stir welding process and to inspect the welding quality
Wolter, B.; Jene, T.; Conrad, C.; Dobmann, G.
Konferenzbeitrag
2010Nuclear magnetic resonance (NMR) imaging for evaluation of reinforced concrete structures
Wolter, B.
Aufsatz in Buch
2010Smart tetrachiral and hexachiral honeycomb: Sensing and impact detection
Abramovitch, Haim; Burgard, Matthias; Edery-Azulay, Lucy; Evans, K. E.; Hoffmeister, Michael; Miller, W.; Scarpa, Fabrizio; Smith, C. W.; Tee, K. F.
Zeitschriftenaufsatz
2009BETOSCAN - robot controlled non-destructive diagnosis of reinforced concrete decks
Reichling, K.; Raupach, M.; Wiggenhauser, H.; Stoppel, M.; Dobmann, G.; Kurz, J.
Konferenzbeitrag
2008On the Integrating of non-destructive testing and probabilistic fracture mechanics
Kurz, J.H.; Cioclov, D.D.; Dobmann, G.
Konferenzbeitrag
2008ProRepaS - detection and evaluation of flaws in repair welds of NiAl-bronze propellers
Junglewitz, A.; Spies, M.; Kooij, A. van
Aufsatz in Buch
2008Sensing and actuation of smart chiral honeycombs
Abramovitch, Haim; Burgard, Matthias; Edery-Azulay, Lucy; Evans, Ken E.; Hoffmeister, Michael; Miller, Wayne; Scarpa, Fabrizio; Smith, Chris W.; Tee, Kong- Fah; Schönecker, Andreas; Seffner, Lutz
Konferenzbeitrag
2008Ultrasonic and Eddy-current inspection of rail wheels and wheel set axles
Rockstroh, B.; Kappes, W.; Walte, F.; Kröning, M.; Bessert, S.; Schäfer, W.; Schallert, R.; Bähr, W.; Joneit, D.; Montnacher, J.; Goetz, J. et al.
Konferenzbeitrag
2007Applications of terahertz spectroscopy in the plastics industry
Wietzke, S.; Rutz, F.; Jördens, C.; Krumbholz, N.; Vieweg, R.; Jansen, C.; Wilk, R.; Koch, M.
Konferenzbeitrag
2006Application of new front-end electronics for non-destructive testing of railroad wheel sets
Kappes, W.; Rockstroh, B.; Bähr, W.; Kröning, M.; Rodner, C.; Goetz, J.; Nemec, D.
Konferenzbeitrag
2006COST Action G8: Non-destructive testing and analysis of museum objects
: Denker, A.; Adriaens, A.; Dowsett, M.; Giumlia-Mair, A.
Buch
2005Grundlagen der Online-Thermographie
Meinlschmidt, P.; Aderhold, J.
Aufsatz in Buch
2004Detection of foreign bodies in food by thermal image processing
Ginesu, G.; Giusto, D.D.; Märgner, V.; Meinlschmidt, P.
Zeitschriftenaufsatz
2004Industrielle Computertomographie Möglichkeiten, Anwendungen und Visionen
Modrich, K.-U.
Konferenzbeitrag
2003New and future applications of fluxgate sensors
Grüger, H.; Grüger, A.; Kaluza, F.
Konferenzbeitrag, Zeitschriftenaufsatz
2002Array of miniaturized fluxgate sensors for non-destructive testing applications
Grüger, H.
Konferenzbeitrag
1998Fast immage processing on die castings
Wenzel, T.; Hanke, R.
Konferenzbeitrag
1997Process-integrated resistance spot welding testing using ultrasonic techniques
Waschkies, E.
Zeitschriftenaufsatz
1995Industrial image processing for non-destructive testing in the field of quality assurance
Kostka, G.; Hanke, R.F.
Konferenzbeitrag
1995Non-destructive evaluation of the mechanical behaviour of TiN-coated steels by laser-induced ultrasonic surface waves
Schneider, D.; Ollendorf, H.; Schwarz, T.
Zeitschriftenaufsatz
1995Three dimensional analysis of growing casting effects
Feiste, K.; Stegemann, D.; Reimcke, W.; Hanke, R.F.
Konferenzbeitrag
1994Automatische Sichtprüfung von Kugellagerteilen
Schramm, U.
Buch
1994Fast automatic x-ray image processing by means of a new multistage filter for background modeling
Hassler, U.; Heil, K.; Hanke, R.F.
Konferenzbeitrag
1994Schnelle, berührungslose Durchmesserprüfung von Strangpreßgut
Spinnler, K.P.
Buch
1994X-ray inspection of solder joints by planar tomography (PCT)
Neubauer, C.; Schröpfer, S.; Hanke, R.F.
Konferenzbeitrag
1992Intelligentes Röntgenprüfsystem. Defekte in Werkstoffen schnell und exakt bestimmen
Bauer, N.; Hanke, R.F.
Zeitschriftenaufsatz
1992Use of dynamic mechanical measurements to determine the aging behaviour of solid propellant.
Husband, M.D.
Zeitschriftenaufsatz
1991Intelligentes Röntgenprüfsystem
Bauer, N.; Hanke, R.F.
Konferenzbeitrag
1990Exact 3D-defect localisation in Al-castings by X-ray inspection
Wang, Y.; Hanke, R.F.
Konferenzbeitrag
1989Nondestructive investigation of fibre reinforced composites by X-ray computed tomography
Hirsekorn, S.; Maisl, M.; Reiter, H.; Scherer, T.
Konferenzbeitrag