| | |
|---|
| 2019 | Analytical equation for the mesopore size distribution function of open cylindrical capillaries
Kutarov, Volodymyr V.; Schieferstein, Eva | Zeitschriftenaufsatz |
| 2019 | Assessment of diffusional mobilities in bcc Cu-Sn and bcc Cu-Zn alloys
Alvares, E.D.M.; Preußner, J. | Zeitschriftenaufsatz |
| 2019 | Combined and Fast Computable Thermal Models for Situationally Optimal Tempering of Machine Tool Components
Weber, Juliane; Glänzel, Janine; Popken, Jens; Shabi, Linart; Weber, Jürgen | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2019 | Comprehensive Electrical Loss Analysis of Monolithic Interconnected Multi-Segment Laser Power Converters
Kimovec, R.; Helmers, H.; Bett, A.W.; Topic, M. | Zeitschriftenaufsatz |
| 2019 | Fast and Reliable State-of-Health Model of a PEM Cathode Catalyst Layer
Schneider, P.; Sadeler, C.; Scherzer, A.-C.; Zamel, N.; Gerteisen, D. | Zeitschriftenaufsatz |
| 2019 | An Image-based Kinematic Model of the Tibiotalar and Subtalar Joints and its Application to Gait Analysis in Children with Juvenile Idiopathic Arthritis
Montefiori, Erica; Modenese, Luca; Marco, Roberto di; Magni-Manzoni, Silvia; Malattia, Clara; Petrarca, Maurizio; Ronchetti, Anna; Tanturri De Horatio, Laura; Dijkhuizen, Pieter van; Wang, Anqi; Wesarg, Stefan; Viceconti, Marco; Mazzà, Claudia | Zeitschriftenaufsatz |
| 2019 | Large-signal modeling of a scalable high-Q AlGaN/GaN high electron-mobility varactor
Amirpour, Raul; Schwantuschke, Dirk; Raay, Friedbert van; Brueckner, Peter; Quay, Rüdiger; Ambacher, Oliver | Zeitschriftenaufsatz |
| 2019 | Optimization of District Heating Systems. European Energy Exchange Price-Driven Control Strategy for Optimal Operation of Heating Plants
Dahrash, A.; Steingrube, A.; Ochs, F.; Elci, M. | Konferenzbeitrag |
| 2019 | Outdoor microalgae cultivation at different biomass concentrations - Assessment of different daily and seasonal light scenarios by modeling
Holdmann, Claudia; Schmid-Staiger, Ulrike; Hirth, Thomas | Zeitschriftenaufsatz |
| 2019 | Performance modeling of PVT collectors: Implementation, validation and parameter identification approach using TRNSYS
Jonas, D.; Lämmle, M.; Theis, D.; Schneider, S.; Frey, G. | Zeitschriftenaufsatz |
| 2019 | Post-Implantation Annealing of Platinum in Silicon
Johnsson, Anna
: Pichler, Peter; Weigel, Robert | Dissertation |
| 2019 | Thermal Modelling of Photovoltaic Modules in Operation and Production
Mittag, M.; Vogt, L.; Herzog, C.; Pfreundt, A.; Shahid, J.; Neuhaus, D.H.; Wirth, H. | Konferenzbeitrag |
| 2019 | Thermochemical Stress in Solar Cells: Contact Pad Modeling and Reliability Analysis
Rendler, L.; Romer, P.; Beinert, A.; Stecklum, S.; Kraft, A.; Eitner, U.; Wiese, S. | Zeitschriftenaufsatz |
| 2019 | Usage Simulation and Testing with xAPI for Adaptive E-Learning
Streicher, Alexander; Bach, Lukas; Roller, Wolfgang | Konferenzbeitrag |
| 2019 | Wider economic and social implications of sustainable economy approaches: Some insights from a scenario exercise
Walz, Rainer; Oldenburg, Clara; Pfaff, Matthias; Schuler, Johannes; Gotsch, Matthias; Marscheider-Weidemann, Frank; Hiete, Michael | Zeitschriftenaufsatz |
| 2018 | Application of waveform relaxation in distributed process co-simulation
Wack, Thorsten; Schlüter, Stefan; Hennig, Torsten; Wagner, Henning; Diekmann, Andreas; Zheng, Qinghua; Grundler, Jonas | Zeitschriftenaufsatz |
| 2018 | Characterization and modeling of airbag fabrics subjected to asymmetric biaxial loading and elevated temperatures
Boljen, Matthias; Rack, Nils Alexander; Kölble, Florian; Rodinger, Silvia; Harwick, Wilfried | Konferenzbeitrag |
| 2018 | Decision Support for Tactical Planning
Kandler, Ute; Simroth, Axel; Morgado, João; Duarte, Emanuel | Konferenzbeitrag |
| 2018 | A detailed full-cell model of a 2018 commercial PERC solar cell in Quokka3
Fell, Andreas; Altermatt, Pietro P. | Zeitschriftenaufsatz |
| 2018 | Impact of Uncertainties of Fundamental Models on Simulated Silicon Solar Cell Efficiencies
Wasmer, S.; Fell, A.; Greulich, J.M. | Konferenzbeitrag |
| 2018 | Influence of Al doping concentration and annealing parameters on TiAl based Ohmic contacts on 4H-SiC
Kocher, Matthias; Rommel, Mathias; Erlbacher, Tobias; Bauer, Anton J. | Konferenzbeitrag |
| 2018 | Load shifting potentials of plug-in electric vehicles - a case study for Germany
Michaelis, Julia; Gnann, Till; Klingler, Anna-Lena | Zeitschriftenaufsatz |
| 2018 | Modeling edge recombination in silicon solar cells
Fell, Andreas; Schön, Jonas; Müller, Matthias; Wöhrle, Nico; Schubert, Martin C.; Glunz, Stefan W. | Zeitschriftenaufsatz |
| 2018 | Modeling of block copolymer dry etching for directed self-assembly lithography
Belete, Zelalem; Bär, Eberhard; Erdmann, Andreas | Konferenzbeitrag |
| 2018 | Modeling the catalytic conversion of steel mill gases using the example of methanol synthesis
Schlüter, Stefan; Hennig, Thorsten | Zeitschriftenaufsatz |
| 2018 | An overview of joint activities on computational imaging and compressive sensing systems by NATO SET-232
Bosq, Todd du; Agarwal, Sanjeev; Dijk, Judith; Gungo, Alper; Guven, H. Emre; Haran, Terence L.; Laurenzis, Martin; Leonard, Kevin; Mahalanobis, Abhijit; Paunescu, Gabriela; Piper, Jonathan; Repasi, Endre | Konferenzbeitrag |
| 2018 | Predicting Yields of Bifacial PV Power Plants - What Accuracy is Possible?
Chiodetti, M.; Kang, J.; Reise, C.; Lindsay, A. | Konferenzbeitrag |
| 2018 | Security Verification of Third Party Design Files in Manufacturing
Giehl, Alexander; Wiedermann, Norbert | Konferenzbeitrag |
| 2018 | Shape processing for content generation
Schinko, Christoph
: Fellner, Dieter W. (Supervisor); Klein, Reinhard (Supervisor) | Dissertation |
| 2018 | A two-scale approach for the computation of flow through pleated filters based on real image data
Kabel, Matthias; Kirsch, Ralf; Osterroth, Sebastian; Rief, Stefan | Konferenzbeitrag |
| 2017 | Angle dependence of solar cells and modules: The role of cell texturization
Geisemeyer, I.; Tucher, N.; Müller, B.; Steinkemper, H.; Hohl-Ebinger, J.; Schubert, M.C.; Warta, W. | Zeitschriftenaufsatz |
| 2017 | Derivation and application of a generalized correlation for mass transfer in packed beds
Reichelt, Erik; Jahn, Matthias; Lange, Rüdiger | Zeitschriftenaufsatz |
| 2017 | Design and prototyping of self-learning methods for semi-automated model creation as a reference behavior in distributed embedded system
Salvi, Aniket
: Potluri, Sasanka (Supervisor); Stiller, Michael (Supervisor) | Master Thesis |
| 2017 | Do plug-in electric vehicles cause a change in travel behavior?
Heilig, Michael; Gnann, Till; Plötz, Patrick; Mallig, Nicolai; Briem, Lars; Kagerbauer, Martin; Vortisch, Peter | Vortrag |
| 2017 | Einsatz hybrider Optimierungsverfahren zur Inbetriebnahme elektromechanischer Systeme
Hipp, Kevin
: Neugebauer, R.; Putz, M. | Dissertation |
| 2017 | A fast and easy perovskite solar cell simulation tool featuring ion migration
Fell, Andreas; Walter, Daniel; Glunz, Stefan W. | Konferenzbeitrag |
| 2017 | FEM-based development of novel back-contact PV modules with ultra-thin solar cells
Beinert, Andreas; Leidl, Roman; Sommeling, Paul; Eitner, Ulrich; Aktaa, Jarir | Konferenzbeitrag |
| 2017 | Go-3D 2017: Mit 3D Richtung Maritim 4.0
: Lukas, Uwe von (Hrsg.); Mahnke, Eva-Maria (Hrsg.); Bauer, Kristine (Hrsg.) | Tagungsband |
| 2017 | Modeling of edge recombination losses in half-cells
Fell, Andreas; Sträter, H.; Müller, M.; Steinkemper, Heiko; Schön, Jonas; Hermle, Martin; Schubert, Martin C.; Neuhaus, D.H.; Glunz, Stefan W. | Konferenzbeitrag |
| 2017 | Platinum diffusion for advanced silicon power devices
Badr, Elie
: Pichler, Peter; Wellmann, Peter | Dissertation |
| 2017 | Protocol modeling accuracy in VANET simulators
Bittl, Sebastian; Roscher, Karsten | Konferenzbeitrag |
| 2016 | Benchmarking sensors in smart environments - Method and use cases
Braun, Andreas; Wichert, Reiner; Kuijper, Arjan; Fellner, Dieter W. | Zeitschriftenaufsatz |
| 2016 | Cryogenic manufacturing processes
Jawahir, I.S.; Attia, H.; Biermann, Dirk; Duflou, Joost R.; Klocke, Fritz; Meyer, D.; Newman, S.T.; Pusavec, F.; Putz, Matthias; Rech, J.; Schulze, V.; Umbrello, D. | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2016 | Entwicklung einer neuen Methode zur Ansteuerung von Ultraschall-Phased Arrays
Gommlich, Andreas
: Meyendorf, Norbert (Betreuer/Gutachter); Gerlach, Gerald (Gutachter); Holstein, Peter (Gutachter); Schubert, Frank (Betreuer) | Dissertation |
| 2016 | Finite aperture multipole sources, radiation, and impedance loading in fluid-filled boreholes
Geerits, Tim; Kranz, Burkhard | Konferenzbeitrag |
| 2016 | Investigation of Thermomechanical Stress in Solar Cells with Multi Busbar Interconnection by Finite Element Modeling
Rendler, L.C.; Kraft, A.; Ebert, C.; Wiese, S.; Eitner, U. | Konferenzbeitrag |
| 2016 | Mechanical stress in solar cells with multi busbar interconnection - parameter study by FEM simulation
Rendler, L.C.; Kraft, A.; Ebert, C.; Eitner, U.; Wiese, S. | Konferenzbeitrag |
| 2016 | Mobility, singularity, and kinematics analyses of a novel spatial parallel mechanism
Xie, Fugui; Liu, Xin-Jun; Luo, Xuan; Wabner, Markus | Zeitschriftenaufsatz |
| 2016 | A Modular Rule-Based Visual Interactive Creation of Tree-Shaped Geo-Located Networks
Brodkorb, Felix; Kopp, Manuel; Kuijper, Arjan; Landesberger, Tatiana von | Konferenzbeitrag |
| 2016 | Reintroducing environmental change drivers in biodiversity-ecosystem functioning research
Laender, Frederik de; Rohr, Jason R.; Ashauer, Roman; Baird, Donald J.; Berger, Uta; Eisenhauer, Nico; Grimm, Volker; Hommen, Udo; Maltby, Lorraine; Meliàn, Carlos J.; Pomati, Francesco; Roessink, Ivo; Radchuk, Viktoriia; Brink, Paul J. van den | Zeitschriftenaufsatz |
| 2016 | Simplified device simulation of silicon solar cells using a lumped parameter optical model
Fell, A.; McIntosh, K.R.; Fong, K.C. | Zeitschriftenaufsatz |
| 2016 | The software architecture to control the Cherenkov Telescope Array
Oya, I.; Füßling, M.; Antonino, Pablo; Conforti, V.; Hagge, L.; Melkumyan, D.; Morgenstern, Andreas; Tosti, G.; Schwanke, U.; Schwarz, J.; Wegner, P.; Colomé, J.; Lyard, E. | Konferenzbeitrag |
| 2016 | VASCO - Mastering the Shoals of Value Stream Mapping
Berndt, Rene; Silva, Nelson; Caldera, Christian; Krispel, Ulrich; Eggeling, Eva; Sunk, Alexander; Edtmayr, Thomas; Sihn, Wilfried; Fellner, Dieter W. | Konferenzbeitrag |
| 2016 | Visual perception of 3D printed translucent objects
Vu, Bui Minh; Urban, Philipp; Tanksale, Tejas Madan; Nakauchi, Shigeki | Konferenzbeitrag |
| 2015 | Automatic pose optimization for robotic processes
Schneider, Ulrich; Diaz Posada, Julian Ricardo; Verl, Alexander | Konferenzbeitrag |
| 2015 | CPV module design optimization for advanced multi-junction solar cell concepts
Steiner, M.; Kiefel, P.; Siefer, G.; Wiesenfarth, M.; Dimroth, F.; Krause, R.; Gombert, A.; Bett, A.W. | Konferenzbeitrag |
| 2015 | DTIP 2015, 17th Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS
: Benoit, Charlot; Mita, Yoshio; Nouet, Pascal; Pressecq, Francis; Schröpfer, Gerold; Rencz, Marta; Schneider, Peter | Tagungsband |
| 2015 | Early energy estimation of heterogeneous embedded networks within adaptive systems
Heinrich, Patrick; Gossen, Dietrich; Oswald, Erik; Knorr, Rudi | Konferenzbeitrag |
| 2015 | Enhanced pressure response in ZnO nanorods due to spontaneous polarization charge
Seifikar, M.; O'Reilly, E.P.; Christian, B.; Lebedev, V.; Volk, J.; Erdélyi, R.; Lukács, I.E.; Dauksevicious, R.; Gaidys, R. | Konferenzbeitrag |
| 2015 | Evaluation of various retrofitting concepts of building envelope for offices equipped with large radiant ceiling panels by dynamic simulations
Jordan, S.; Hafner, J.; Kuhn, T.E.; Legat, A.; Zbašnik-Senegačnik, M. | Zeitschriftenaufsatz |
| 2015 | Impact of inhomogeneous catalyst layer properties on impedance spectra of polymer electrolyte membrane fuel cells
Gerteisen, D. | Zeitschriftenaufsatz |
| 2015 | Modeling and simulation of filtration processes
Iliev, Oleg; Kirsch, Ralf; Lakdawala, Zahra; Rief, Stefan; Steiner, Konrad | Aufsatz in Buch |
| 2015 | Optimization of pulse-modulation based ToF imaging systems
Süss, Andreas; Tan, Yenn Leng; Rosmeulen, Maarten; Hosticka, Bedrich J. | Konferenzbeitrag |
| 2015 | Potentials and limitations of SAR image simulators - a comparative study of three simulation approaches
Balz, Timo; Hammer, Horst; Auer, Stefan | Zeitschriftenaufsatz |
| 2015 | Simulation in thin film technology
Turowski, M.; Jupe, M.; Ehlers, H.; Melzig, T.; Pflug, A.; Ristau, D. | Konferenzbeitrag |
| 2015 | Simulation of a polarized laser beam reflected at the sea surface: Modeling and validation
Schwenger, Frédéric | Konferenzbeitrag |
| 2015 | YieldOpt, a model to predict the power output and energy yield for concentrating photovoltaic modules
Steiner, M.; Siefer, G.; Hornung, T.; Peharz, G.; Bett, A.W. | Zeitschriftenaufsatz |
| 2014 | Analysis on the exploitation of EV fast charging to prevent extensive grid investments in suburban areas
Dallmer-Zerbe, K.; Stillahn, T.; Erge, T.; Wille-Haussmann, B.; Wittwer, C. | Zeitschriftenaufsatz |
| 2014 | Analytical modeling of industrial-related silicon solar cells
Fellmeth, T.; Clement, F.; Biro, D. | Zeitschriftenaufsatz |
| 2014 | Architecture-based simulation of quality attributes in the context of software ecosystems
Flat, Waldemar
: Knauber, Peter (Supervisor); Knodel, Jens (Supervisor) | Master Thesis |
| 2014 | A benchmarking model for sensors in smart environments
Braun, Andreas; Wichert, Reiner; Kuijper, Arjan; Fellner, Dieter W. | Konferenzbeitrag |
| 2014 | An evaluation environment and methodology for automotive media streaming applications
Protzmann, Robert; Massow, Kay; Radusch, Ilja | Konferenzbeitrag |
| 2014 | Fast and Exact Plane-based Representation for Polygonal Meshes
Krispel, Ulrich; Ullrich, Torsten; Fellner, Dieter W. | Konferenzbeitrag |
| 2014 | Heterogeneities at the cell level by modeling and experiments
Gerteisen, D.; Zamel, N. | Vortrag |
| 2014 | Increasing the lifetime of electronic packaging by higher temperatures: Solders vs. silver sintering
Hutzler, Aaron; Tokarski, Adam; Kraft, Silke; Zischler, Sigrid; Schletz, Andreas | Konferenzbeitrag |
| 2014 | Integrating the Modelica DSL into a platform for model-based tool interoperability
Tcholtchev, Nikolay; Dudeck, Grit; Wagner, Michael; Hein, Christian; Prakash, Arun; Ritter, Tom | Konferenzbeitrag |
| 2014 | Kinetic modeling of rhamnolipid production by Pseudomonas aeruginosa PAO1 including cell density-dependent regulation
Henkel, M.; Schmidberger, A.; Vogelbacher, Markus; Kühnert, Christian; Beuker, J.; Bernard, Thomas; Schwartz, T.; Syldatk, C.; Hausmann, R. | Zeitschriftenaufsatz |
| 2014 | Loss of wire tension in the wire web during the slurry based multi wire sawing process
Meißner, D.; Schoenfelder, S.; Hurka, B.; Zeh, J.; Sunder, K.; Koepge, R.; Wagner, T.; Grün, A.; Hagel, H.-J.; Moeller, H.J.; Schwabe, H.; Anspach, O. | Zeitschriftenaufsatz |
| 2014 | Modeling and simulation of a resilient dynamic protection system to protect critical infrastructures
Klein, Ruediger; Kober, Manuel | Konferenzbeitrag |
| 2014 | Modeling the soiling of glazing materials in arid regions with geographic information systems (GIS)
Herrmann, J.; Slamova, K.; Glaser, R.; Köhl, M. | Konferenzbeitrag, Zeitschriftenaufsatz |
| 2014 | Prediction of silicon PV module temperature for hot spots and worst case partial shading situations using spatially resolved lock-in thermography
Geisemeyer, I.; Fertig, F.; Warta, W.; Rein, S.; Schubert, M.C. | Zeitschriftenaufsatz |
| 2014 | Shaping of ceramics using residual stresses
Höpfel, H.; Pfeiffer, W. | Konferenzbeitrag |
| 2013 | Application of tool-specific simulation algorithms to Memristor models written in Modelica
Majetta, Kristin; Clauß, Christoph; Schmidt, Torsten; Tetzlaff, Ronald | Konferenzbeitrag |
| 2013 | Can anti-soiling coating on solar glass influence the degree of performance loss over time of PV modules drastically
Klimm, E.; Lorenz, T.; Weiss, K.-A. | Konferenzbeitrag |
| 2013 | Context modeling for dynamic configuration of automotive functions
Weiß, Gereon; Grigoleit, Florian; Struss, Peter | Konferenzbeitrag |
| 2013 | Hybrid dynamical systems for memristor modelling
Haase, Joachim; Lange, André | Konferenzbeitrag |
| 2013 | Kinematische Modellierung und Regelung omnidirektionaler, nicht-holonomer Fahrwerke
Connette, Christian Pascal
: Verl, Alexander (Hauptberichter) | Dissertation |
| 2013 | Kinetic modeling of the time course of N-butyryl-homoserine lactone concentration during batch cultivations of Pseudomonas aeruginosa PAO1
Henkel, M.; Schmidberger, A.; Kühnert, Christian; Beuker, J.; Bernard, Thomas; Schwartz, T.; Syldatk, C.; Hausmann, R. | Zeitschriftenaufsatz |
| 2013 | Method for situation-based modeling and simulation of assembly systems
Neumann, Michael; Westkämper, Engelbert | Konferenzbeitrag, Zeitschriftenaufsatz |
| 2013 | Modelling and analysis of execution traces for real-time applications
Ramamurthy, Preethi
: Rafiq, Salman (Betreuer); Wong, Stephan (Advisor); Bertels, Koen (Advisor); Zaidman, Andy (Advisor) | Master Thesis |
| 2013 | Numerical power balance and free energy loss analysis for solar cells including optical, thermodynamic, and electrical aspects
Greulich, J.; Höffler, H.; Würfel, U.; Rein, S. | Zeitschriftenaufsatz |
| 2013 | Simulation of natural gas production from submarine gas hydrate
Janicki, Georg; Schlüter, Stefan; Hennig, Torsten; Deerberg, Görge | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2013 | Simulation of natural gas production from submarine gas hydrate deposits combined with CO2 storage
Janicki, Georg; Schlüter, Stefan; Hennig, Torsten; Deerberg, Görge | Poster |
| 2012 | 3D-modeling of an integrated SOFC stack unit
Ganzer, Gregor; Schöne, Jakob; Beckert, Wieland; Megel, Stefan; Michaelis, Alexander | Poster, Konferenzbeitrag |
| 2012 | Admittance matrix of a trapezoidal piezoelectric heterogeneous bimorph
Schächtele, Jonathan; Goll, Erich; Muralt, Paul; Kaltenbacher, Dominik | Zeitschriftenaufsatz |
| 2012 | Calculating the stress of multi-track formations in induction-assisted laser cladding
Brückner, F.; Lepski, D.; Nowotny, S.; Leyens, C.; Beyer, E. | Konferenzbeitrag |
| 2012 | Completing digital cultural heritage objects by sketching subdivision surfaces toward restoration planning
Bein, Matthias; Peña Serna, Sebastian; Stork, André; Fellner, Dieter W. | Konferenzbeitrag |
| 2012 | Granular deleting in multi level security models - an electronic engineering approach
Thorleuchter, Dirk; Weck, Gerhard; Poel, Dirk van den | Konferenzbeitrag |
| 2012 | Method for multi-scale modelling and simulation of assembly systems
Neumann, Michael; Constantinescu, Carmen; Westkämper, Engelbert | Konferenzbeitrag |
| 2012 | Model-based development of a safety concept
Adler, Rasmus; Kemmann, Sören; Liggesmeyer, Peter; Schwinn, Jean-Pascal | Konferenzbeitrag |
| 2012 | Modeling support for solid oxide fuel cell-component development
Ganzer, Gregor; Schöne, Jakob; Beckert, Wieland | Poster, Konferenzbeitrag |
| 2012 | Models and methods for the simulation of filter elements
Andrä, Heiko; Iliev, Oleg; Kabel, Matthias; Kirsch, Ralf; Lakdawala, Zahra | Konferenzbeitrag |
| 2012 | Process development for high-solid enzymatic conversion of lignocellulose within a biorefinery
Ludwig, Daniel; Hirth, Thomas; Rupp, Steffen; Zibek, Susanne | Konferenzbeitrag |
| 2012 | Real-time 3D-simulation tool for ultrasonic transducers used in aeroengine component inspections
Spies, Martin; Dillhöfer, Alexander; Rieder, Hans; Dobrovolskij, Dascha | Konferenzbeitrag |
| 2012 | Simulation of submarine gas hydrate deposits as a sustainable energy source and CO2 storage
Janicki, Georg; Hennig, Torsten; Schlüter, Stefan; Deerberg, Görge | Vortrag |
| 2012 | SysML-basierte Anforderungsmodellierung - Model-checking als "Blackbox"
Keuler, Thorsten; Antonino, Pablo | Bericht |
| 2012 | Towards a memristor model library in modelica
Majetta, Kristin; Clauß, Christoph; Schmidt, Torsten | Konferenzbeitrag |
| 2012 | Usability based modeling for advanced IT-security - an electronic engineering approach
Thorleuchter, Dirk; Weck, Gerhard; Poel, Dirk van den | Konferenzbeitrag |
| 2011 | An adaptive control model for non-functional feature interactions
Prehofer, Christian | Konferenzbeitrag |
| 2011 | Analytical model for p-n junctions under point source illumination
Blanco-Filgueira, B.; López, P.; Döge, J. | Konferenzbeitrag |
| 2011 | DEM-Modellierung des Verschleißverhaltens von Schneidwerkzeugen
Mölders, Nils; Blömer, Jan; Bertling, J. | Zeitschriftenaufsatz |
| 2011 | Designing a multi-purpose capacitive sensing input device
Braun, Andreas; Hamisu, Pascal | Konferenzbeitrag |
| 2011 | Dokumentieren für die Entwicklung und nicht für die Schublade: Pragmatische Nutzung von Software Architekturen
Knodel, Jens | Bericht |
| 2011 | A fully-scalable coplanar waveguide passive library for millimeter-wave monolithic integrated circuit design
Diebold, S.; Weber, R.; Seelmann-Eggebert, M.; Massler, H.; Tessmann, A.; Leuther, A.; Kallfass, I. | Konferenzbeitrag |
| 2011 | High granular multi-level-security model for improved usability
Thorleuchter, Dirk; Poel, Dirk van den | Konferenzbeitrag |
| 2011 | Implementation and enhancement of a graphical modelling language for factory engineering and design
Constantinescu, Carmen; Riexinger, Günther | Konferenzbeitrag |
| 2011 | Recent experiences with ultrasonic inspection of baffle former bolts
Debnar, A.; Alaerts, L.; Spies, M.; Minogue, P.; Epineau, C. | Konferenzbeitrag |
| 2011 | Recent experiences with ultrasonic inspection of baffle former bolts
Debnar, A.; Alaerts, L.; Spies, M.; Minogue, P.; Epineau, C. | Konferenzbeitrag |
| 2011 | SysML-basierte Anforderungsmodellierung - Model-checking als "Blackbox"
Keuler, Thorsten; Antonino, Pablo | Konferenzbeitrag |
| 2011 | Thermal modeling of 3D stacks for floorplanning
Reitz, Sven; Heinig, Andy; Martin, Roland; Stolle, Jörn; Wilde, Andreas | Konferenzbeitrag |
| 2011 | Visual semantic analysis to support semi-automatic modeling of semantic service descriptions
Bhatti, Nadeem; Fellner, Dieter W. | Aufsatz in Buch |
| 2010 | Approach for iterative validation of automotive embedded systems
Weiß, Gereon; Zeller, Marc; Eilers, D.; Knorr, Rudi | Konferenzbeitrag |
| 2010 | A concept for interactive assistant systems for multi-user engineering based on AutomationML
Schleipen, Miriam; Bader, T. | Konferenzbeitrag |
| 2010 | Design methods for 3D IC integration
Schneider, P.; Reitz, S.; Stolle, J.; Martin, R.; Heinig, A.; Wilde, A. | Konferenzbeitrag |
| 2010 | Energy efficiency improvements in compressed air systems: A techno-economic evaluation approach
Hirzel, Simon; Elsland, Rainer; Weißfloch, Ute; Schröter, Marcus; Barth, J.P. | Konferenzbeitrag |
| 2010 | Engineering dynamic adaptation for achieving cost-efficient resilience in software-intensive embedded systems
Adler, Rasmus; Schneider, Daniel; Trapp, Mario | Konferenzbeitrag |
| 2010 | Graphene - mechanical properties and applications
Tonner, Friedemann | Konferenzbeitrag |
| 2010 | Graphene - mechanical properties and applications
Tonner, Friedemann | Konferenzbeitrag |
| 2010 | High-temperature modeling of AlGaN/GaN HEMTs
Vitanov, S.; Palankovski, V.; Maroldt, S.; Quay, R. | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2010 | Mechatronic simulation of electromechanical servo-presses - examples and challenges
Neugebauer, Reimund; Arnold, B.; Ihlenfeldt, S.; Mauermann, R.; Roth, T. | Vortrag |
| 2010 | Modeling and simulation of burr formation: State-of-the-art and future trends
Leopold, J.; Wohlgemuth, R. | Konferenzbeitrag |
| 2010 | Numerical simulation of the activation behavior of thermal shape memory alloys
Neugebauer, Reimund; Bucht, A.; Pagel, K.; Jung, J. | Konferenzbeitrag |
| 2010 | A reference model for factory engineering and design
Constantinescu, Carmen; Westkämper, Engelbert | Konferenzbeitrag |
| 2010 | Workpiece-centered approach to reconfiguration in manufacturing engineering
Bengel, Matthias
: Verl, Alexander (Hauptberichter) | Dissertation |
| 2009 | Dynamic model for the efficiency analysis of intralogistic systems
Hoyndorff, K.; Spee, D.; Ten Hompel, M. | Konferenzbeitrag |
| 2009 | Model based virtual startup of automation systems
Schob, U.; Böttcher, R.; Blochwitz, T.; Oelsner, O.; Winter, M. | Konferenzbeitrag |
| 2009 | Modeling of input devices for natural interaction from low-level capacitive proximity sensor data
Braun, Andreas
: Hamisu, Pascal (Supervisor) | Master Thesis |
| 2009 | RT-Describe
Radermacher, A.; Terrier, F.; Gerard, S.; Weiß, G.; Eilers, D. | Vortrag |
| 2008 | Contact regimes in the wire sawing process: Explicit 3D modeling of PEG/SiC slurry
Bierwisch, C.; Weber, B.; Kübler, R.; Moseler, M.; Kleer, G. | Konferenzbeitrag |
| 2008 | Doctoral Symposium at MODELS 2008
Pretschner, Alexander | Konferenzbeitrag |
| 2008 | Entwurf von SPS-Steuerungen am virtuellen Maschinenprototyp
Blochwitz, T.; Altmann, S. | Zeitschriftenaufsatz |
| 2008 | Evaluation of model based specifications integrated into airbus tool and process environment
Hack, Michael
: Rombach, H. Dieter (Supervisor); Muthig, Dirk (Supervisor); Sander, Dietmar (Supervisor) | Diplomarbeit |
| 2008 | Hierarchisierte Modelle in Advanced Planning and Scheduling (APS)
Baumann, M.; Dimitrov, T. | Zeitschriftenaufsatz |
| 2008 | KI 2008. Advances in artificial intelligence. 31st Annual German Confernce on AI
: Dengel, A.R.; Berns, K.; Breuel, T.M.; Bomarius, F.; Roth-Berghofer, T.R. | Tagungsband |
| 2008 | Managing losses in through silicon vias with different return current path configurations
Curran, B.; Ndip, I.; Guttovski, S.; Reichl, H. | Konferenzbeitrag |
| 2008 | Modeling a secure computer system. Paper
Thorleuchter, D. | Konferenzbeitrag |
| 2008 | Modeling a secure computer system. Presentation
Thorleuchter, D. | Konferenzbeitrag |
| 2008 | Simulation logistischer Systeme
Kuhn, A. | Aufsatz in Buch |
| 2007 | Application and validation of the gaussian beam superposition technique to simulate the inspection of aero engine components
Spies, M.; Feist, W.D. | Konferenzbeitrag |
| 2007 | Development of Modeling and Simulation from mid 70th up to now
Leopold, J. | Konferenzbeitrag |
| 2007 | Effect of the cavity resonance-gain offset on the output power characteristics of GaSb-based VECSELs
Schulz, N.; Rattunde, M.; Ritzenthaler, C.; Rösener, B.; Manz, C.; Köhler, K.; Wagner, J. | Zeitschriftenaufsatz |
| 2007 | Entwurf von SPS-Steuerungen am virtuellen Maschinenprototyp
Blochwitz, T.; Altmann, S. | Konferenzbeitrag |
| 2007 | Evaluating modeling solutions on their ability to support the partitioning of automotive embedded systems
Kebemou, A.; Schieferdecker, I. | Konferenzbeitrag |
| 2007 | Evaluation of ultrasonic scattering at LCF cracks including optically measured, real roughness profiles
Spies, Martin; Satzger, W.; Bamberg, J. | Konferenzbeitrag |
| 2007 | Fundamental investigation of the "Draw-peeling" process
Kieselstein, J.; Leopold, J. | Konferenzbeitrag |
| 2007 | Mechatronische Modellbildung von Produktionsanlagen
Schob, U. | Buch |
| 2007 | Mesoscopic simulation of photoresist processing in optical lithography
Schnattinger, T. | Dissertation |
| 2007 | Modell zur Beschreibung von Zeitfaktoren in der automatisierten Stetigfördertechnik
Libert, S.; Ten Hompel, M.; Nettsträter, A. | Konferenzbeitrag |
| 2007 | Modellierung des Verfügbarkeitsverhaltens von Intralogistiksystemen
Jung, E.N.; Follert, G.; Ten Hompel, M. | Konferenzbeitrag |
| 2007 | Selected Readings in Computer Graphics 2006
: Encarnacao, J.L.; Fellner, D.W.; Schaub, J. | Buch |
| 2007 | Selected Readings in Computer Graphics 2006. CD-ROM
: Encarnacao, J.L.; Fellner, D.W.; Schaub, J. | Audiovisuelles Material |
| 2007 | Simulations of the influence of rearrangement during sintering
Henrich, B.; Wonisch, A.; Kraft, T.; Moseler, M.; Riedel, H. | Zeitschriftenaufsatz |
| 2007 | Ultrasonic field modeling for immersed components using Gaussian beam superposition
Spies, M. | Zeitschriftenaufsatz |
| 2007 | VPS/ESC: Overview of a new module for electrostatic coating
Scheibe, Andreas | Konferenzbeitrag |
| 2006 | 3D Modelling 2006
: Roth-Koch, Sabine (Technical Committee) | Tagungsband |
| 2006 | 4D Narbendarstellung des Herzens Visualisierung und Modellierung der Dynamik und Funktion des linken Ventrikels
Nowak, S.
: Wesarg, S. (Prüfer) | Diplomarbeit |
| 2006 | CAE approach to the design of smart structures applications
Auweraer, H. van der; Herold, S.; Mohring, L.; Oliviera, L. de; Silva, M. da; Deraemaeker, A. | Konferenzbeitrag |
| 2006 | A conclusive concept for three-dimensional imaging based on efficient steering and focusing of an ultrasonic 2D-array
Spies, M.; Rieder, H.; Didion, C.; Santraine, B.; Licht, R.; Gebhardt, W. | Konferenzbeitrag |
| 2006 | Design automation for systems on a chip realized in leading edge manufacturing technologies
Elst, G.; Schneider, P. | Konferenzbeitrag |
| 2006 | Flash Annealing Technology for USJ: Modeling and Metrology
Gelpey, J.; McCoy, S.; Camm, D.; Lerch, W.; Paul, S.; Pichler, P.; Borland, J.O.; Timans, P. | Konferenzbeitrag |
| 2006 | Gaussian beam modeling for commercial transducers applied to aero engine disc inspection
Spies, M. | Konferenzbeitrag |
| 2006 | Increased efficiency in the quantitative evaluation of state/event fault trees
Förster, M.; Kaiser, B. | Konferenzbeitrag |
| 2006 | Modeling approaches for active systems
Herold, S.; Atzrodt, H.; Mayer, D.; Thomaier, M. | Konferenzbeitrag |
| 2006 | Modeling the beam fields of circular and rectangular, flat and focused transducers using the gaussian beam superposition technique
Spies, M. | Konferenzbeitrag |
| 2006 | Multi-scale simulations of rearrangement effects and anisotropic behavior during sintering
Wonisch, A.; Kraft, T.; Riedel, H. | Konferenzbeitrag |
| 2006 | Optimization of mirrors for the ultrasonic inspection of complex-shaped components using standard transducers
Spies, M.; Bamberg, J. | Konferenzbeitrag |
| 2006 | Realisierung von Sensor-3D-Umgebungen für den Einsatz in Ambient-Intelligence-Anwendungen
Villette, P.
: Hellenschmidt, M. (Prüfer) | Studienarbeit |
| 2006 | Research for adaptive assembly
Westkämper, E. | Konferenzbeitrag |
| 2006 | Selected Readings in Computer Graphics 2005. CD-ROM
: Encarnacao, J.L.; Schaub, J. | Audiovisuelles Material |
| 2006 | Verfahren und Anlage zum automatisierten Kommissionieren von in Beuteln verpackten Gütern
Leiking, L. | Konferenzbeitrag |
| 2005 | An application oriented view on materials modeling
Gumbsch, P. | Aufsatz in Buch |
| 2005 | Combined master and FokkerPlanck equations for the modeling of the kinetics of extended defects in Si
Lampin, E.; Ortiz, C.J.; Cowern, N.E.B.; Colombeau, B.; Cristiano, F. | Zeitschriftenaufsatz |
| 2005 | Entwurf sigma-delta-PLL-basierter Frequenzgeneratoren höherer Ordnung für drahtlose digitale Kommunikationssysteme
Christoffers, N. | Dissertation |
| 2005 | Modeling texture evolution during rolling of magnesium alloy AZ31
Walde, T.; Riedel, H. | Konferenzbeitrag, Zeitschriftenaufsatz |
| 2005 | Modellierung und Analyse von Angriffen auf Routingverfahren in mobilen Ad-hoc-Netzen
Bucher, T.
: Ebinger, P. (Prüfer) | Diplomarbeit |
| 2005 | Numerical time-domain simulation of wave propagation and scattering in acoustic microscopy for subsurface defect characterization
Schubert, F.; Köhler, B.; Zinin, P. | Konferenzbeitrag |
| 2005 | Prediction of ultrasonic flaw signals and model-to-experiment comparison
Spies, M. | Konferenzbeitrag |
| 2005 | ProSim 05. The 6th International Workshop on Software Process Simulation and Modeling. Proceedings
: Pfahl, D.; Raffo, D.M.; Rus, I.; Wernick, P. | Tagungsband |
| 2005 | Sensor modules for structural health monitoring and reliability of components
Kröning, M.; Berthold, A.; Meyendorf, N. | Konferenzbeitrag |
| 2004 | 3-D finite element analysis of a SOFC-stack
Beckert, W.; Paepcke, A.; Otschik, P.; Kusnecov, M. | Konferenzbeitrag |
| 2004 | 3D Modelling 2004
: Roth-Koch, Sabine (Technical Committee) | Tagungsband |
| 2004 | Analytical methods for modeling of ultrasonic nondestructive testing of anisotropic media
Spies, M. | Zeitschriftenaufsatz |
| 2004 | Anwendung softwaretechnischer Komponentenkonzepte auf die Produktionsautomatisierung
Klein, M.; Braatz, B.; Ehrig, H.; Schröter, G.; Bengel, M. | Zeitschriftenaufsatz |
| 2004 | Calculation of high frequency ultrasonic signals for shear wave insonification in solid material
Schmitz, V.; Langenberg, K.-J.; Chakhlov, S. | Zeitschriftenaufsatz |
| 2004 | Development of a hybrid finite element/finite integration model for the UK's national physical laboratory acoustic emission reference facility
Gelat, P.; Theobad, P.; Schubert, F. | Konferenzbeitrag |
| 2004 | Electrical deactivation and diffusion of boron in preamorphized ultrashallow junctions: Interstitial transport and F co-implant control
Colombeau, B.; Smith, A.J.; Cowern, N.E.B.; Lerch, W.; Paul, S.; Pawlak, B.J.; Cristiano, F.; Hebras, X.; Bolze, D.; Ortiz, C.; Pichler, P. | Konferenzbeitrag |
| 2004 | Modeling critical infrastructure requirements
Wolthusen, S. | Konferenzbeitrag |
| 2004 | On the modeling of transient diffusion and activation of boron during post-implantation annealing
Pichler, P.; Ortiz, C.J.; Colombeau, B.; Cowern, N.E.B.; Lampin, E.; Claverie, A.; Cristiano, F.; Lerch, W.; Paul, S. | Konferenzbeitrag |
| 2004 | Selected Readings in Computer Graphics 2003
Schaub, J.; Schönhut, J.
: Encarnacao, J.L. | Buch |
| 2004 | Semantische Konsistenz viewpoint-orientierter Modellierungstechniken am Beispiel der Produktionsautomatisierung
Schröter, G.; Braatz, B.; Ehrig, H.; Klein, M.; Bengel, M. | Zeitschriftenaufsatz |
| 2003 | 3D Modelling 2003 - NUM 3D
: Roth-Koch, S. | Tagungsband |
| 2003 | Analytical beam field modeling applied to transducer optimization and inspection simulation in ultrasonic non-destructive testing
Spies, M. | Zeitschriftenaufsatz |
| 2003 | Anpassbare Methodenassistenz in CASE-Werkzeugen
Zettel, J. | Dissertation |
| 2003 | Approximate model for laser welding
Michel, J.; Pfeiffer, S.; Schulz, W.; Nießen, M.; Kostrykin, V.; Maier, C. | Konferenzbeitrag |
| 2003 | Enzymatische Reaktionen in überkritischen Fluiden
Cinquemani, C.; Ehrenstein, U.; Kabasci, S.; Danzig, J.; Eckstein, M.; Kragl, U.; Jurtzik, J.; Kraska, T. | Konferenzbeitrag |
| 2003 | Modeling for machine tool optimized manufacture
Markworth, L.; Straube, A.; Glasmacher, L. | Konferenzbeitrag |
| 2003 | Modellierung der Mikroverkapselung mit Populationsbilanzen
Blömer, J.; Bertling, J. | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2003 | Ein modularisiertes Simulationsmodell zur Entscheidungsunterstützung in Software-Entwicklungsprozessen
Neu, H.; Hanne, T. | Bericht |
| 2003 | Quasistatic and dynamic properties of 1-3 composites made by soft molding
Gebhardt, S.; Schönecker, A.; Steinhausen, R.; Seifert, W.; Beige, H. | Zeitschriftenaufsatz |
| 2003 | Search-based execution-time verification in object-oriented and component-based real-time system development
Groß, H.-G.; Mayer, N. | Konferenzbeitrag |
| 2003 | Semi-analytical wave-field modeling applied to ultrasonic inspection simulation
Spies, M. | Konferenzbeitrag |
| 2003 | Simultaneous five-axis-machining of complex shaped parts
Klocke, F.; Markworth, L.; Glasmacher, L. | Konferenzbeitrag |
| 2003 | Synthetic aperture focusing for defect reconstruction in anisotropic media
Spies, M.; Jager, W. | Zeitschriftenaufsatz |
| 2003 | Technology based planning of high performance manufacturing systems
Westkämper, E.; Bischoff, J.; Briel, R. von | Zeitschriftenaufsatz |
| 2002 | Biomimetic walking robot SCORPION: Control and modeling
Klaassen, B.; Linnemann, R.; Spenneberg, D.; Kirchner, F. | Zeitschriftenaufsatz |
| 2002 | Boosting the application of ultrasonic arrays
Spies, M.; Gebhardt, W.; Rieder, H. | Konferenzbeitrag |
| 2002 | Flexural vibration behavior of piezoelectric heterogeneous bimorph beams
Hirsekorn, S. | Zeitschriftenaufsatz |
| 2002 | Modeling of difficult to cut materials
Knodt, S.; Markworth, L.; Reinhardt, M. | Konferenzbeitrag |
| 2002 | Modeling of TiAl6V4 machining operations
Klocke, F.; Markworth, L.; Messner, G. | Konferenzbeitrag |
| 2002 | Modeling transient radiation of ultrasonic transducers in anisotropic materials including wave attenuation
Spies, M. | Konferenzbeitrag |
| 2002 | Multi-scaling modeling and simulation of manufacturing systems
Westkämper, E.; Gottwald, B.; Gerth, C. | Konferenzbeitrag |
| 2002 | Nasal airflow diagnosis. Comparison of experimental studies and computer simulations
Müller-Wittig, W.K.; Mlynski, G.; Weinhold, I.; Bockholt, U.; Voss, G. | Konferenzbeitrag |
| 2002 | Richtlinien - Von Use Cases zu Statecharts in 7 Schritten
Denger, C.; Kerkow, D.; Knethen, A. von; Medina Mora, M.; Paech, B. | Bericht |
| 2002 | Simulating a standard type problem of ultrasonic testing - A contribution to the comparison of ultrasonic models
Spies, M. | Konferenzbeitrag |
| 2002 | Tutorial on practical product line scoping and modeling
Schmid, K.; John, I. | Konferenzbeitrag |
| 2001 | Erstellung und Validierung eines mathematischen Modells zur Beschreibung biotechnologischer Prozesse
Bergstedt, U.; Körner, H.-J.; Kabasci, S.; Deerberg, G. | Konferenzbeitrag |
| 2001 | Influences on structure formation at the cutting edge with abrasive waterjets
Henning, A.; Westkämper, E.; Friedrich, R.; Ditzinger, T.; Kübler, T.; Radons, G. | Konferenzbeitrag |
| 2001 | Learning software organizations
Ruhe, G. | Aufsatz in Buch |
| 2001 | Measurements and scale effects of digitized virtual human head
Prakash, E.C.; Jegathese, R.; Chan, T.K. | Konferenzbeitrag |
| 2001 | Modellierung eines Türsteuergerätes mit SCR. Eine Fallstudie im QUASAR-Projekt
Denger, C.; Doerr, J.; Kamsties, E. | Bericht |
| 2001 | Modelling and Optimization of Biological Processes in Stirred Tank Reactors
Bergstedt, U.; Körner, H.-J.; Boltersdorf, U.; Deerberg, G.; Fahlenkamp, H. | Konferenzbeitrag |
| 2001 | Selected Readings in Computer Graphics 2000
: Encarnacao, J.L. | Buch |
| 2001 | Simulation and optimization of biological processes in stirred tank reactors
Bergstedt, U.; Körner, H.-J.; Boltersdorf, U.; Deerberg, G.; Fahlenkamp, H. | Konferenzbeitrag |
| 2001 | System Dynamics as an Enabling Technology for Learning in Software Organisations
Pfahl, D.; Ruhe, G. | Bericht |
| 2001 | System Dynamics as an Enabling Technology for Learning in Software Organisations
Pfahl, D.; Ruhe, G. | Konferenzbeitrag |
| 2001 | Technology based planning of high performance manufacturing systems
Westkämper, E.; Bischoff, J.; Briel, R. von | Konferenzbeitrag |
| 2001 | A tool-box approach to the simulation of multi-physics systems
Schwarz, P. | Konferenzbeitrag |
| 2001 | View Planning for Unknown Indoor Scenes Based on a Cost Benefit Analysis
Klein, K.; Sequeira, V. | Konferenzbeitrag |
| 2001 | Visualisierung der Entwicklung der Sahara durch ein Virtual Reality Exponat für eine öffentliche Ausstellung
Guthier, T.
: Fröhlich, T. (Prüfer); Joger, U. (Prüfer); Klees, F. (Prüfer) | Diplomarbeit |
| 2000 | ARCADE/VT - A virtual table-centric modeling system
Stork, A.; Amicis, R. de | Konferenzbeitrag |
| 2000 | Computationally Efficient SH-Wave Modeling in Transversely Isotropic Media
Spies, M. | Zeitschriftenaufsatz |
| 2000 | Experiences from DAMACH-HP Project Management: An applied modeling and simulation project for improving harbour processes
Blümel, E. | Konferenzbeitrag |
| 2000 | Industrial application of harbour processes, managing and controlling models and methods in Latvian Ports
Blümel, E.; Novitsky, L.; Tolujev, J.; Merkuryev, Y. | Konferenzbeitrag |
| 2000 | Modeling and simulation of fermentation processes
Bergstedt, U.; Körner, H.-J.; Kabasci, S.; Deerberg, G. | Konferenzbeitrag |
| 2000 | Modellierung und Steuerung von Prozeßketten in segmentierten Unternehmen mittels lernender Strukturen
Westkämper, E. | Konferenzbeitrag |
| 2000 | Modelling and Simulation of Biotechnological Processes: BIOSIM-A Package suitable for Integration in Process Engineering Tools
Bergstedt, U.; Körner, H.-J.; Kabasci, S.; Deerberg, G. | Konferenzbeitrag |
| 2000 | Modelling of Impact Zones at Cutting with Abrasive Waterjets
Henning, A.; Friedrich, R.; Ditzinger, T.; Radons, G. | Konferenzbeitrag |
| 2000 | On void engulfment in shaped sapphire crystals using 3D modelling
Nicoara, I.; Vizman, D.; Friedrich, J. | Zeitschriftenaufsatz |
| 2000 | A simplified broad-band large-signal nonquasi-static table-based FET Model
Fernandez-Barciela, M.; Tasker, P.; Campos-Roca, Y.; Demmler, M.; Massler, H.; Sanchez, E.; Curras-Francos, M.C.; Schlechtweg, M. | Zeitschriftenaufsatz |
| 2000 | A temperature dependent model for the saturation velocity in semiconductor materials
Quay, R.; Moglestue, C.; Palankovski, V.; Selberherr, S. | Zeitschriftenaufsatz |
| 1999 | Analytical, scaleable large signal noise model for GaAs and InP MMIC applications
Reuter, R.; Leven, A. | Konferenzbeitrag |
| 1999 | Auf dem Weg zum Modell. Rechneranwendungen in der Verfahrenstechnik
Deerberg, G.; Schwarze-Benning, K. | Zeitschriftenaufsatz |
| 1999 | CEFIT - A Numerical Modeling Tool for Axisymetric Wave Propagation in Cylindrical Media
Schubert, F.; Pfeiffer, A.; Köhler, B. | Konferenzbeitrag |
| 1999 | Current Activities in Ultrasonic NDE Simulations - A German Perspective
Spies, M. | Konferenzbeitrag |
| 1999 | Kompliziertes leicht abgebildet. Simulationswerkzeuge für die Bioverfahrenstechnik
Bergstedt, U.; Körner, H.-J.; Kabasci, S.; Deerberg, G. | Zeitschriftenaufsatz |
| 1999 | Modeling in hardware description languages for the simulation of coupled fluidic, thermal and electrical effects
Lüdecke, A.; Trieu, H.-K.; Hoffmann, G.; Weyand, P.; Pelz, G. | Konferenzbeitrag |
| 1999 | Modeling of Graded 1-3 Composite Piezoelectric Transducers
Hirsekorn, S.; Gebhardt, E.; Arnold, W. | Konferenzbeitrag |
| 1999 | Modelling the Factors Driving the Quality of Meetings in the Software Development Process
Briand, L.C.; Kempkens, R.; Lünenbürger, K.; Ochs, M.A.; Verlage, M. | Bericht |
| 1999 | Noise, high frequency
Agethen, M.; Reuter, R.; Breder, T.; Bertenburg, R.M.; Brockerhoff, W.; Tegude, F.J. | Aufsatz in Buch |
| 1999 | Polyhedral Morphing
Alexa, M. | Bericht |
| 1999 | Schutzgas-Verpackung für SB-Frischfleisch. Veränderungen der Gasatmosphäre während der Lagerung
Pfeiffer, T.; Menner, M. | Zeitschriftenaufsatz |
| 1999 | Texturing 3D Models of Real World Objects from Multiple Unregistered Photographic Views
Neugebauer, P.J.; Klein, K. | Konferenzbeitrag |
| 1999 | Virtual Engineering and Using Virtual Reality for Engineering
Brunetti, G.; Amicis, R. de; Rix, J. | Konferenzbeitrag |
| 1998 | Bedeutung technischer und abfallwirtschaftlicher Planungsgrößen für die Kosten von Rostfeuerungsanlagen
Wolf, C.; Beckmann, R. | Konferenzbeitrag |
| 1998 | Einfluß abfallwirtschaftlicher und technischer Planungsgrößen auf die Anlagenkosten
Beckmann, R. | Konferenzbeitrag |
| 1998 | A flexible impactor optimized for field use (Abstract)
Holländer, W.; Lödding, H.; Dunkhorst, W. | Zeitschriftenaufsatz |
| 1998 | High-Resolution Materials Characterization by Conventional and Near-Field Acoustic Microscopy
Hirsekorn, S.; Arnold, W. | Zeitschriftenaufsatz |
| 1998 | Measurement of ambient aerosol characteristics for receptor modeling with special emphasis on fine particles (Abstract)
Pohlmann, G.; Koch, W.; Theisen, M.; Nießner, R. | Zeitschriftenaufsatz |
| 1998 | A modeling approach to include mechanical microsystem components into the system simulation
Neul, R.; Becker, U.; Lorenz, G.; Schwarz, P.; Haase, J.; Wünsche, S. | Konferenzbeitrag |
| 1998 | Modeling of a combustion engine with hardware description languages
Pelz, G.; Kowalewski, T.; Pohlmann, N.; Zimmer, G. | Konferenzbeitrag |
| 1998 | Non-Destructive Testing and Quality Management
Baumbach, H.; Kraus, S.; Cioclov, D.; Schmitz, V. | Zeitschriftenaufsatz |
| 1998 | Simulation based on learning methods
Westkämper, E.; Pirron, J.; Schmidt, T. | Zeitschriftenaufsatz |
| 1998 | Simulation Based Production Planning Through Artificial Neural Networks
Westkämper, E.; Pirron, J.; Schmidt, T. | Konferenzbeitrag |
| 1998 | Simulation von Gas-Flüssigkeitsreaktoren mit halbempirischen Modellen
Deerberg, G.; Boltersdorf, U. | Konferenzbeitrag |
| 1998 | Some aspects of thick film resist performance and modeling
Erdmann, A.; Henderson, C.L.; Willson, C.G.; Dammel, R.R. | Konferenzbeitrag |
| 1998 | Towards a Quantification of Damage Risk Caused by Cracks using a Probabilistic Fracture Mechanics Approach Together with new Developements in Quantitative NDT
Schmitz, V.; Cioclov, D. | Zeitschriftenaufsatz |
| 1998 | Virtual prototyping for a camera winder: a case study
Pelz, G.; Bielefeld, J.; Zimmer, G. | Konferenzbeitrag |
| 1997 | Adaptive Triangulierung komplexer Oberflächen
Neugebauer, P.J.; Klein, K. | Konferenzbeitrag |
| 1997 | Characterization and modeling of InGaAs/GaAs multi-quantum well lasers by capacitance-voltage measurements
Arias, J.; Esquivias, I.; Bürkner, S.; Chazan, P.; Ralston, J.D.; Larkins, E.C.; Mikulla, M.; Weisser, S.; Rosenzweig, J. | Konferenzbeitrag |
| 1997 | Computer Aided Design and Modeling for Ultrasonic Applications: CADMUS-on-PC
Wüstner, H.; Rieder, H.; Spies, M.; Walte, F. | Konferenzbeitrag |
| 1997 | Einsatz der Generalisierten Punktquellen-Synthese zur Vorbereitung automatischer Ultraschallprüfungen
Hübschen, G.; Spies, M.; Walte, F. | Konferenzbeitrag |
| 1997 | Electro-thermal circuit simulation using simulator coupling
Wünsche, S.; Clauß, C.; Schwarz, P.; Winkler, F. | Zeitschriftenaufsatz |
| 1997 | The great dun fell cloud experiment 1993
Choularton, T.W.; Colvile, R.N.; Bower, K.N.; Gallagher, M.W.; Wells, M.; Beswick, K.M.; Arends, B.G.; Möls, J.J.; Kos, G.P.A.; Fuzzi, S.; Lind, J.A.; Orsi, G.; Facchini, M.C.; Laj, P.; Gieray, R.; Wieser, P.; Engelhardt, T.; Berner, A.; Kruisz, C.; Möller, D.; Acker, K.; Wieprecht, W.; Lüttke, J.; Levsen, K.; Bizjak, M.; Hansson, H.-C.; Cederfelt, S.-I.; Frank, G.; Mentes, B.; Martinsson, B.; Orsini, D.; Svenningsson, B.; Swietlicki, E.; Wiedensohler, A.; Noone, K.J.; Pahl, S.; Winkler, P.; Seyffer, E.; Helas, G.; Jaeschke, W.; Georgii, H.W.; Wobrock, W.; Preiss, M.; Maser, R.; Schell, D.; Dollard, G.; Jones, B.; Davies, T.; Sedlak, D.L.; David, M.M.; Wendisch, M.; Cape, J.N.; Hargreaves, K.J.; Sutton, M.A.; Storeton-West, R.L.; Fowler, D.; Hallberg, A.; Harrison, R.M.; Peak, J.D. | Zeitschriftenaufsatz |
| 1997 | The importance of natural organic material for environmental processes in waters and soils
Kördel, W.; Dassenakis, M.; Lintelmann, J.; Padberg, S. | Zeitschriftenaufsatz |
| 1997 | Integrated modeling for quality management
Mertins, K.; Jochem, R. | Konferenzbeitrag |
| 1997 | Lebendige Virtuelle Welten. Physikalisch-basierte Modelle in Computeranimation und virtueller Realität
Dai, F. | Habilitationsschrift |
| 1997 | Numerical Simulation of 3D SH-Wave Fields Generated in Anisotropic Materials
Batra, N.K.; Simmonds, K.E.; Mignogna, R.B.; Hübschen, G.; Spies, M. | Konferenzbeitrag |
| 1997 | Transducer Beam Field Modeling in Anisotropic Media by Superposition of Gaussian Base Functions
Kröning, M.; Spies, M. | Konferenzbeitrag |
| 1996 | Animation within mobile multimedia on-line services
Belz, C.; Bergold, M.; Häckelmann, H.; Strack, R. | Konferenzbeitrag |
| 1996 | A computationally efficient modeling code for SH-waves in austenitic welds using an explicit space-time green-function
Spies, M.; Kröning, M. | Konferenzbeitrag |
| 1996 | Design and optimization of a multifunctional phased array search unit
Spies, M.; Kröning, M.; Gebhardt, W.; Dalichow, M.H. | Konferenzbeitrag |
| 1996 | Effiziente Skulpturierung von 3D-Modellen aus Tiefenbildern
Neugebauer, P.J.; Schimpf, C. | Konferenzbeitrag |
| 1996 | Generating CAD-models of teeth
Neugebauer, P.J. | Konferenzbeitrag |
| 1996 | The integration of different model types for model-based diagnosis
Brinkop, A.; Kockskämper, S.; Zimmermann-Sturm, M. | Konferenzbeitrag |
| 1996 | A model for liquid phase sintering
Svoboda, J.; Riedel, H.; Gaebel, R. | Zeitschriftenaufsatz |
| 1996 | Modeling in standards. Requirements to represent a chemical distributor
Brinkop, A. | Konferenzbeitrag |
| 1996 | Modellbasierte Diagnose von diskreten ereignisorientierten Systemen am Beispiel einer Montageanlage für Greiferbacken
Zimmermann-Sturm, M. | Buch |
| 1996 | Modellieren und Abbilden mit Ultraschall
Langenberg, K.-J.; Klaholz, S.; Marklein, R.; Mayer, K.; Walte, F.; Kostka, J. | Konferenzbeitrag |
| 1996 | Scanning and reconstruction of work pieces from range images
Neugebauer, P.J. | Konferenzbeitrag |
| 1996 | Virtual Cloning - Dokumentation in der Denkmalpflege
Neugebauer, P.J. | Konferenzbeitrag |
| 1995 | 3D-Modellierung der Abstrahlung, Ausbreitung und Beugung elastischer Wellen mittels generalisierter Punktquellensynthese (GPSS)
Spies, M.; Kröning, M. | Konferenzbeitrag |
| 1995 | Application-directed modeling of radiation and propagation of elastc waves in anisotropic media: GPSS and OPOSSM
Spies, M.; Walte, F. | Konferenzbeitrag |
| 1995 | Elastic wave propagation and scattering in austenitic steel
Walte, F.; Spies, M.; Klaholz, S.; Langenberg, K.-J. | Konferenzbeitrag |
| 1995 | Ein elektrothermisches Heterobipolar-Transistormodell zur Schaltungssimulation
Baureis, P. | Dissertation |
| 1995 | Ultraschallmodellierung mit dem EFIT-Code zur zerstörungsfreien Prüfung an Beton und isotropen Schweißnähten
Walte, F.; Klaholz, S.; Langenberg, K.-J.; Bärmann, R.; Marklein, R.; Irmer, S.; Müller, H. | Konferenzbeitrag |
| 1994 | Analoge Simulation digitaler Logik
Voigt, B.; Horneber, E.-H.; Augsburger, R.; Neubauer, C. | Zeitschriftenaufsatz |
| 1994 | Application of modeling codes to ultrasonic weld inspection
Walte, F.; Spies, M.; Langenberg, K.-J. | Konferenzbeitrag |
| 1994 | Improved passive model for transient prediction of GaAs E/D MESFET analogue switches
Feng, S.; Seitzer, D. | Zeitschriftenaufsatz |
| 1994 | Modeling and visualization of ultrasonic testing situations
Schmitz, V.; Kröning, M.; Langenberg, K.-J. | Konferenzbeitrag |
| 1994 | A petri net based modelling technology for manufacturing system engineering
Borusan, A. | Konferenzbeitrag |
| 1993 | Ein funktionales Modellspeichersystem für parallel zu verarbeitende CAD-Objekte
Münke, M.
: Spur, G. (Prüfer) | Dissertation |
| 1993 | Monolithic high gain DC to 10 GHz direct coupled feedback transimpedance amplifier unsing AlGaAs / GaAs HBTs
Baureis, P.; Göttler, D.; Oehler, F.; Zwicknagel, P. | Konferenzbeitrag |
| 1993 | Product modeling
Krause, F.-L.; Kimura, F.; Kjellberg, T.; Lu, S.C.-Y.; Tipnis, V.A.; Alting, L.; ElMaraghy, H.A.; Eversheim, W.; Weck, M.; Iwata, K.; Suh, N.P.; Wolf, A.C.H. van der | Konferenzbeitrag |
| 1993 | Visualization of flow simulation data in environmental modeling
Jung, V. | Aufsatz in Buch |
| 1992 | Charakterisierung und Modellierung des Übergangsverhaltens von Analogschaltern mit GaAs-E/D-MESFET
Feng, S.; Sauerer, J.; Hagelauer, R.; Seitzer, D. | Konferenzbeitrag |
| 1992 | Mismatch of current sources and accuracy of D/A converters in 0.5 mu m GaAs/GaAlAs HEMT technology
Feng, S.; Sauerer, J.; Seitzer, D. | Konferenzbeitrag |
| 1992 | Use of KADS-models in BEHAVIOR. Version 1.0
Hemmann, T.; Voß, H.; Niemeyer, H. | Bericht |
| 1991 | Integrating simulation and visualization for environmental analysis
Groß, M.; Kühn, V. | Konferenzbeitrag |
| 1990 | Microwave excited excimer laser
Hünermann, L.; Meyer, R.; Schnase, A.; Richter, F.; Wagner, R. | Konferenzbeitrag |
| 1990 | Model based simulation of technical systems with the modeling and simulation tool CAUSA.
Dilger, W.; Möller, J. | Konferenzbeitrag |
| 1990 | Modellierung eines Industrieroboters mit Getriebeelastizitäten
Engell, S.; Wöllhaf, K. | Konferenzbeitrag |
| 1990 | Simulation des Ausbreitungsverhaltens von Flugzeugabgasen
Kühn, V. | Konferenzbeitrag |
| 1983 | Implantation and diffusion models for process simulation
Ryssel, H.; Prinke, G.; Hoffmann, K. | Aufsatz in Buch |
| 1983 | A multigrid method for simulation of the diffusion equation in VLSI process modeling
Seidl, A. | Zeitschriftenaufsatz |