Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Application of the Hybrid Process Ultrasound Enhanced Friction Stir Welding on Dissimilar Aluminum/Dual-Phase Steel- and Aluminum/Magnesium Joints
Thomä, Marco; Gester, Andreas; Wagner, Guntram; Straß, Benjamin; Wolter, Bernd; Benfer, Sigrid; Gowda, Darshan Kare; Fürbeth, Wolfram
Zeitschriftenaufsatz
2019Finite element simulations on the relation of microstructural characteristics and the formation of different types of adiabatic shear bands in a β-titanium alloy
Winter, Sven; Pfeiffer, Steffen; Bergelt, Tim; Wagner, Martin Franz-Xaver
Konferenzbeitrag
2019Increasing heat transfer of metals through periodical microstructures using Direct Laser Interference Patterning
Alamri, Sabri; Schell, Frederic; Steege, Tobias; Lasagni, Andrés-Fabián; Kunze, Tim
Konferenzbeitrag
2019Influence of rolling texture on near-threshold crack extension behavior in aluminum alloy EN AW-6082
Wicke, Marcel; Brückner-Foit, Angelika; Kirsten, Tina; Zimmermann, Martina; Bülbül, Fatih; Christ, Hans-Jürgen
Zeitschriftenaufsatz
2019Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance
Gu, Dongdong; Zhang, Hongmei; Dai, Donghua; Xia, Mujian; Hong, Chen; Poprawe, Reinhart
Zeitschriftenaufsatz
2019Powder based and suspension based additive manufacturing of hardmetal
Berger, Christian; Pötschke, Johannes; Abel, Johannes; Richter, Hans-Jürgen; Scheithauer, Uwe; Weingarten, Steven; Moritz, Tassilo; Michaelis, Alexander
Zeitschriftenaufsatz
2019Solids under extreme shear: Friction-mediated subsurface structural transformations
Greiner, C.; Gagel, J.; Gumbsch, P.
Zeitschriftenaufsatz
201830 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered TiN-SiOx thin film
Keckes, Jozef; Daniel, Rostislav; Todt, Juraj; Zalesak, Jakub; Sartory, Bernhard; Braun, Stefan; Gluch, Jürgen; Rosenthal, Martin; Burghammer, Manfred; Mitterer, C.; Niese, S.; Kubec, Adam
Zeitschriftenaufsatz
2018Comparison between GTA and laser beam welding of 9% Ni steel for critical cryogenic applications
El-Batahgy, A-M.; Gumenyuk, A.; Gook, S.; Rethmeier, M.
Zeitschriftenaufsatz
2018Comparison of long-term radii evolution of the S-phase in aluminum alloy 2618A during ageing and creep
Rockenhäuser, C.; Schriever, S.; Hartrott, P. von; Piesker, B.; Skrotzki, B.
Zeitschriftenaufsatz
2018Computational assessment of the microstructure-dependent plasticity of lamellar gray cast iron - Part IV: Assessment of the yield surface after plastic loading
Metzger, M.; Seifert, T.
Zeitschriftenaufsatz
2018Corrosion resistance of silicon-infiltrated silicon carbide (SiSiC)
Striegler, Maria; Matthey, Björn; Mühle, Uwe; Michaelis, Alexander; Herrmann, Mathias
Zeitschriftenaufsatz
2018Effect of laser-beam and hybrid-laser-arc welding parameters and filler metal on microstructure and mechanical properties of thick heat-treated steel X8Ni9+QT640 for cryogenic service
El-Batahgy, A-M.; Gook, S.; Gumenyuk, A.; Rethmeier, M.
Konferenzbeitrag
2018Improvement of the electrical conductivity between electrode and sheet in spot welding process by direct laser interference patterning
Heilmann, Stefan; Zwahr, Christoph; Knape, Alexander; Zschetzsche, Jörg; Lasagni, Andrés-Fabián; Füssel, Uwe
Zeitschriftenaufsatz
2018In-situ xrd-investigation of electrolytic copper layer
Schneider, Michael; Weiser, Mathias; Matthey, Björn; Herrmann, Mathias
Zeitschriftenaufsatz
2018Influence of feedstock powder modification by heat treatments on the properties of APS-sprayed Al2O3-40%TiO2 coatings
Berger, Lutz-Michael; Sempf, Kerstin; Sohn, Yoo Jung; Vaßen, Robert
Zeitschriftenaufsatz
2018Influence of heat input and preheating on the cooling rate, microstructure and mechanical properties at the hybrid laser-arc welding of API 5L X80 steel
Turichin, G.; Kuznetsov, M.; Pozdnyakov, A.; Gook, S.; Gumenyuk, A.; Rethmeier, M.
Zeitschriftenaufsatz, Konferenzbeitrag
2018Influence of surface state on properties of Ni-Mn-Ga actuator elements
Böhm, Andrea; Schneider, Jörg; Drossel, Welf-Guntram; Pagounis, Emmanouel; Laufenberg, Markus
Konferenzbeitrag
2018Influence of the oxygen flow rate on gas flow sputtered thermal barrier coatings
Rösemann, N.; Ortner, K.; Bäker, M.; Petersen, J.; Bräuer, G.; Rösler, J.
Zeitschriftenaufsatz
2018Micro‐electrochemical investigation of the passive behavior of thin anodic titanium oxide films on TiAlV6‐4
Langklotz, Ulrike; Noeske, Michael; Schneider, Michael
Zeitschriftenaufsatz
2018Micromechanical investigation and numerical simulation of fatigue crack formation in welded joints
Beckmann, C.; Kennerknecht, T.; Preußner, J.; Farajian, M.; Luke, M.; Hohe, J.
Zeitschriftenaufsatz
2018Microstructural investigations of polycrystalline Ti2AlN prepared by physical vapor deposition of Ti-AlN multilayers
Gröner, Lukas; Kirste, Lutz; Oeser, Sabine; Fromm, Alexander; Wirth, Marco; Meyer, Frank; Burmeister, Frank; Eberl, Chris
Zeitschriftenaufsatz
2018On the stability of c-BN-reinforcing particles in ceramic matrix materials
Wolfrum, Anne-Kathrin; Matthey, Björn; Michaelis, Alexander; Herrmann, Mathias
Zeitschriftenaufsatz
2018The origin of surface microstructure evolution in sliding friction
Greiner, C.; Liu, Z.; Schneider, R.; Pastewka, L.; Gumbsch, P.
Zeitschriftenaufsatz
2018A thermodynamically consistent model for elastoplasticity, recovery, recrystallization and grain coarsening
Kertsch, L.; Helm, D.
Zeitschriftenaufsatz
2017Characteristics of mechanical metamaterials based on buckling elements
Findeisen, C.; Hohe, J.; Kadic, M.; Gumbsch, P.
Zeitschriftenaufsatz
2017Corrosion stability of Sialon-based materials in acids and basic solutions
Nickol, Alexander; Wolfrum, Anne-Kathrin; Kunz, Willy; Michaelis, Alexander; Herrmann, Mathias
Zeitschriftenaufsatz
2017Evaluation of soft chemistry methods to synthesize Gd-doped CaMnO3-δ with improved thermoelectric properties
Löhnert, Romy; Stelter, Michael; Töpfer, Jörg
Zeitschriftenaufsatz
2017Influence of post-treatment on the microstructural and tribomechanical properties of suspension thermally sprayed WC-12 wt%Co nanocomposite coatings
Ali, O.; Ahmed, R.; Faisal, N.H.; Alazani, N.M.; Berger, Lutz-Michael; Kaiser, Arno; Toma, Filofteia-Laura; Polychroniadis, E.K.; Sall, M.; Elakwah, Y.O.; Goosen, M.F.A.
Zeitschriftenaufsatz
2017Influence of substrate temperature on morphology and behavior under cyclic thermal load of gas flow sputtered zirconia coatings
Rösemann, N.; Ortner, K.; Petersen, J.; Stöwer, M.; Bäker, M.; Bräuer, G.; Rösler, J.
Zeitschriftenaufsatz
2017Microstructural investigation of diamond-SiC composites produced by pressureless silicon infiltration
Matthey, Björn; Höhn, Sören; Wolfrum, Anne-Kathrin; Mühle, Uwe; Motylenko, Mykhaylo; Rafaja, David; Michaelis, Alexander; Herrmann, Mathias
Zeitschriftenaufsatz
2017Microstructure of gas flow sputtered thermal barrier coatings
Rösemann, N.; Ortner, K.; Petersen, J.; Bäker, M.; Bräuer, G.; Rösler, J.
Zeitschriftenaufsatz
2017Modelling of Ultrasonic Scattering in Polycrystals Aiming for Tools to Simulate Experiments in NDT&E
Hirsekorn, Sigrun; Dobrovolskij, Dascha; Spies, Martin
Konferenzbeitrag
2017SiC-bonded diamond materials produced by pressureless silicon infiltration
Matthey, Björn; Herrmann, Mathias; Hörner, Martin; Geldern, Maike van; Kunze, Steffen; Blug, Bernhard; Michaelis, Alexander
Zeitschriftenaufsatz
2017Thermodynamically consistent modelling of recrystallization and grain coarsening in precipitation‐hardened alloys
Kertsch, C.; Helm, D.
Zeitschriftenaufsatz, Konferenzbeitrag
2017Wire-based laser metal deposition for additive manufacturing of TiAl6V4: Basic investigations of microstructure and mechanical properties from build-up parts
Klocke, Fritz; Arntz, Kristian; Klingbeil, Nils; Schulz, Martin
Konferenzbeitrag
2016Computational assessment of the microstructure-dependent plasticity of lamellar gray cast iron - Part III: A new yield function derived from microstructure-based models
Metzger, M.; Seifert, T.
Zeitschriftenaufsatz
2016Determination of local resistivity in ceramic composites by electron microscopy
Sempf, Kerstin; Boese, Markus; Gnauck, Peter; Höhn, Sören; Herrmann, Mathias
Zeitschriftenaufsatz
2016Effect of a deep cryogenic treatment on wear and microstructure of a 6101 aluminum alloy
Steier, V.F.; Ashiuchi, E.S.; Reißig, L.; Araújo, J.A.
Zeitschriftenaufsatz
2016Effects of spark plasma sintering conditions on the anisotropic thermoelectric properties of bismuth antimony telluride
Han, Li; Spangsdorf, S.H.; Nong, Ngovan; Hung, Le Thanh; Zhang, Y.B.; Pham, H.N.; Chen, Yu; Roch, Aljoscha; Stepien, Lukas; Pryds, Nini H.
Zeitschriftenaufsatz
2016Electromagnetic techniques for materials characterization
Altpeter, Iris; Tschuncky, Ralf; Szielasko, Klaus
Aufsatz in Buch
2016Formation of secondary borides in liquid phase-sintered B6O materials
Thiele, Maik; Herrmann, Mathias; Müller, Christin; Michaelis, Alexander
Zeitschriftenaufsatz
2016Influence of Microstructures on Tribological Systems - Development of Process and Surface Structure
Regel, Gerhard; Putz, Matthias; Blau, Peter; Hochmuth, Carsten; Frieß, Uwe; Fiedler, Maik
Zeitschriftenaufsatz, Konferenzbeitrag
2016The influence of the initial near-surface microstructure and imposed stress level on the running-in characteristics of lubricated steel contacts
Brink, A.; Lichtenberg, K.; Scherge, M.
Zeitschriftenaufsatz
2016Laser microstructured metal thin films as promising alternative for indium based transparent electrodes
Eckhardt, Sebastian; Siebold, Mathias; Lasagni, Andrés-Fabián
Zeitschriftenaufsatz
2016Low heat input gas metal arc welding for dissimilar metal weld overlays part I: The heat-affected zone
Frei, Julian; Alexandrov, Boian T.; Rethmeier, Michael
Zeitschriftenaufsatz
2016Microstructure and mechanical properties of Ti-15Zr alloy used as dental implant material
Medvedev, A.E.; Molotnikov, A.; Lapovok, R.; Zeller, R.; Berner, S.; Habersetzer, P.; Dalla Torre, F.
Zeitschriftenaufsatz
2016Modelling grain growth in the framework of Rational Extended Thermodynamics
Kertsch, L.; Helm, D.
Zeitschriftenaufsatz
2016Optimization of cutting processes for magnetic shape memory actuator elements
Böhm, Andrea; Schneider, Jörg; Drossel, Welf-Guntram; Pagounis, E.; Laufenberg, M.
Konferenzbeitrag
2015Computational assessment of the microstructure-dependent plasticity of lamellar gray cast iron - Part I: Methods and microstructure-based models
Metzger, M.; Seifert, T.
Zeitschriftenaufsatz
2015Computational assessment of the microstructure-dependent plasticity of lamellar gray cast iron - Part II: Initial yield surfaces and directions
Metzger, M.; Seifert, T.
Zeitschriftenaufsatz
2015Electrochemical corrosion of silicon-infiltrated silicon carbide ceramics in aqueous solutions
Herrmann, Mathias; Sempf, Kerstin; Kremmer, Kerstin; Schneider, Michael; Michaelis, Alexander
Zeitschriftenaufsatz
2015Geometric control of cell alignment and spreading within the confinement of antiadhesive poly(ethylene glycol) microstructures on laser-patterned surfaces
Strehmel, Christine; Perez-Hernandez, Heidi R.; Zhang, Zhenfang; Löbus, Axel; Lasagni, Andrés-Fabián; Lensen, Marga C.
Zeitschriftenaufsatz
2015Influence of bias voltage and oxygen flow rate on morphology and crystallographic properties of gas flow sputtered zirconia coatings
Rösemann, N.; Ortner, K.; Petersen, J.; Schadow, T.; Bäker, M.; Bräuer, G.; Rösler, J.
Zeitschriftenaufsatz
2015Influence of different sintering techniques on microstructure and phase composition of oxygen-transporting ceramic
Ravkina, Olga; Räthel, Jan; Feldhoff, Armin
Zeitschriftenaufsatz
2015Influences on the thermomechanical fatigue crack growth of the nickel alloy 617
Schlesinger, M.; Schweizer, C.; Brontfeyn, Y.
Zeitschriftenaufsatz
2015Investigation on joint characteristics of laser beam welded press hardenable ultra-high strength steels with ferritic-martensitic and martensitic microstructure
Janzen, V.; Meschut, G.; Dahmen, M.; Poprawe, R.; Lindner, S.; Wagener, Rainer; Melz, Tobias
Zeitschriftenaufsatz
2015Laser and hybrid laser-arc welding of cryogenic 9%Ni steel for construction of LNG storage tanks
Gook, Sergej; Forquer, Matthew; Gumenyuk, Andrey; Rethmeier, Michael; El-Batahgy, Abdel-Monem
Konferenzbeitrag
2015Modeling of uncertainties in long fiber reinforced thermoplastics
Hohe, J.; Beckmann, C.; Paul, H.
Zeitschriftenaufsatz
2015Novel sheet metal parts with sensor and actuator mode of operation
Drossel, Welf-Guntram; Schubert, Andreas; Nestler, Matthias; Hensel, Sebastian; Müller, Roland; Müller, Michael; Müller, Benedikt; Jahn, Stephan
Konferenzbeitrag
2015Simulation of osmotic and reactive effects in membranes with resolved microstructure
Calo, Victor M.; Nicolò, E. di; Iliev, Oleg; Lakdawala, Zahra; Leonhard, Katherine H.L.; Printsypar, Galina
Konferenzbeitrag
2014Advances in Barkhausen noise analysis
Meyendorf, Norbert; Hillmann, Susanne; Cikalova, Ulana; Schreiber, Jürgen
Konferenzbeitrag
2014Analysis of microstructural changes during high temperature exposure by means of non-destructive micro-magnetic methods
Rabung, Madalina; Kuhn, Bernd
Konferenzbeitrag
2014Deformation behaviour of TWIP-Steels: From experiments to constitutive modelling and simulations
Butz, A.; Zapara, M.; Erhart, A.; Croizet, D.; Stenberg, N.; Hagstrom, J; Helm, D.; Schneider, M; Kampczyk, M.; Haufe, A.; Biasutti, M.
Konferenzbeitrag
2014Determination of the easy axes of small ferromagnetic precipitates in a bulk material by combined magnetic force microscopy and electron backscatter diffraction techniques
Batista, Leonardo; Rabe, Ute; Hirsekorn, Sigrun
Zeitschriftenaufsatz
2014Electrochemical corrosion of silicon carbide ceramics in H2SO4
Herrmann, M.; Sempf, K.; Schneider, M.; Sydow, U.; Kremmer, K.; Michaelis, A.
Zeitschriftenaufsatz
2014Enhanced oxidation resistance of ZrB2/SiC composite through in situ reaction of gadolinium oxide in patterned surface cavities
Gonzalez-Julian, Jesus; Cedillos-Barraza, Omar; Döring, Sven; Nolte, Stefan; Guillon, Olivier; Lee, William E.
Zeitschriftenaufsatz
2014Ex-service analysis of membrane tubes after the operation in a demonstrator unit
Rutkowski, B.; Kriegel, Ralf; Malzbender, Jürgen
Zeitschriftenaufsatz
2014Influence of the microstructure on the corrosion resistance of plasma-nitrided austenitic stainless steel 304L and 316L
Biehler, J.; Hoche, H.; Oechsner, M.; Kaestner, P.; Bunk, K.; Bräuer, G.
Zeitschriftenaufsatz
2014Microcladding of hypereutectic Al-Si alloys: technological aspects and structure features
Grigoriev, Sergej Nikolaevich; Tarasova, Tatyana Vasilievna; Gvozdeva, Galina Olegovna; Nowotny, Steffen
Zeitschriftenaufsatz
2014Microstructure and residual stresses of laser structured surfaces
Preußner, J.; Oeser, S.; Pfeiffer, W.; Temmler, A.; Willenborg, E.
Konferenzbeitrag
2014Origins of folding instabilities on polycrystalline metal surfaces
Beckmann, N.; Romero, P.A.; Linsler, D.; Dienwiebel, M.; Stolz, U.; Moseler, M.; Gumbsch, P.
Zeitschriftenaufsatz
2014Synthesis of biodiesel in microstructured reactors under supercritical reaction conditions
Schürer, Jochen; Thiele, Richard; Wiborg, Jens Ole; Ziogas, Athanassios; Kolb, Gunther
Konferenzbeitrag
2014Theoretical description of ultrasonic propagation and scattering phenomena in polycrystalline structures aiming for simulations on nondestructive materials characterization
Hirsekorn, Sigrun
Konferenzbeitrag
2013Characterization of the magnetic micro- and nanostructure in unalloyed steels by magnetic force microscopy
Batista, Leonardo; Rabe, Ute; Hirsekorn, Sigrun
Konferenzbeitrag
2013Correlation between microstructure and electrical resistivity of hexagonal boron nitride ceramics
Steinborn, C.; Herrmann, M.; Keitel, U.; Schönecker, A.; Räthel, J.; Rafaja, D.; Eichler, J.
Zeitschriftenaufsatz
2013Direct laser interference patterning of planar and non-planar steels and their microstructural characterization
Bieda, M.; Schmädicke, C.M.; Wetzig, A.; Lasagni, A.
Zeitschriftenaufsatz
2013Induction-assisted laser beam welding of a thermomechanically rolled HSLA S500MC steel: A microstructure and residual stress assessment
Coelho, R.S.; Corpas, M.; Moreto, J.A.; Jahn, A.; Standfuß, J.; Kaysser-Pyzalla, A.; Pinto, H.
Zeitschriftenaufsatz
2013Influence of pressure-assisted polymerization on the microstructure and strength of polymer-infiltrated ceramics
Steier, V.F.; Koplin, C.; Kailer, A.
Zeitschriftenaufsatz
2013Investigation of binderless WC-TiC-Cr3C2 hard materials prepared by spark plasma sintering (SPS)
Qiao, Z.; Räthel, J.; Berger, L.-M.; Herrmann, M.
Zeitschriftenaufsatz
2013Magnetic micro- and nanostructures of unalloyed steels: Domain wall interactions with cementite precipitates observed by MFM
Batista, Leonardo; Rabe, Ute; Hirsekorn, Sigrun
Zeitschriftenaufsatz
2013MALDI-TOF-CID for the microstructure elucidation of polymeric hydrolysable tannins
Radebe, Nonhlanhla; Rode, Karsten; Pizzi, A.; Giovando, S.; Pasch, Harald
Zeitschriftenaufsatz
2013Microstructure-permeability relation of porous beta-Si3N4 ceramics
Topates, G.; Mammitzsch, L.; Petasch, U.; Adler, J.; Kara, F.; Mandal, H.
Zeitschriftenaufsatz
2012Atomic force microscopy - what is it all about, and what does it tell us about the microstructure of metals?
Hirsekorn, Sigrun
Konferenzbeitrag
2012Comparison of the microstructural characteristics and electrical properties of thermally sprayed Al2O3 coatings from aqueous suspensions and feedstock powders
Toma, F.-L.; Berger, L.-M.; Scheitz, S.; Langner, S.; Rödel, C.; Potthoff, A.; Sauchuk, V.; Kusnezoff, M.
Zeitschriftenaufsatz
2012Determination of friction behavior in extrusion processes with a new experimental method
Sun, D.-Z.; Kailer, A.; Andrieux, F.; Ockewitz, A.
Konferenzbeitrag
2012Electrical resistivity of silicon nitride-silicon carbide based ternary composites
Zschippang, E.; Klemm, H.; Herrmann, M.; Sempf, K.; Guth, U.; Michaelis, A.
Zeitschriftenaufsatz
2012Formation of Ti2AlN phase after post-heat treatment of Ti-Al-N films deposited by pulsed magnetron sputtering
Yang, Y.; Keunecke, M.; Stein, C.; Gao, L.-J.; Jiang, X.; Bewilogua, K.; Sun, C.
Zeitschriftenaufsatz
2012Interface orientation distribution during grain growth in bulk SrTiO3 measured by means of 3D X-ray diffraction contrast tomography
Syha, M.; Rheinheimer, W.; Bäurer, M.; Lauridsen, E.M.; Ludwig, W.; Weygand, D.; Gumbsch, P.
Konferenzbeitrag
2012Kinetics of rare earth incorporation and its role in densification and microstructure formation of alpha-Sialon
Herrmann, M.; Höhn, S.; Bales, A.
Konferenzbeitrag, Zeitschriftenaufsatz
2012Microstructure and mechanical properties of melt-spun aluminium alloys consolidated by spark plasma sintering and forging
Schubert, Thomas; Lorenz, Bernd; Steger, Jürgen; Weißgärber, Thomas; Neugebauer, Reimund; Kieback, Bernd
Konferenzbeitrag
2012Microstructures of Erbium modified aluminum-copper alloys
Berghof-Hasselbächer, E.; Masset, P.J.; Zhang, L.
Zeitschriftenaufsatz
2012Numerical and experimental design of graded cellular sandwich cores for multi-functional aerospace applications
Hohe, J.; Hardenacke, V.; Fascio, V.; Girard, Y.; Baumeister, J.; Stöbener, K.; Weise, J.; Lehmhus, D.; Pattofatto, S.; Zeng, H.; Zhao, H.; Calbucci, V.; Rustichelli, F.; Fiori, F.
Zeitschriftenaufsatz
2012Room-temperature MBE deposition, thermoelectric properties, and advanced structural characterization of binary Bi2Te3 and Sb2Te3 thin films
Peranio, N.; Winkler, M.; Bessas, D.; Aabdin, Z.; König, J.; Böttner, H.; Hermann, R.P.; Eibl, O.
Zeitschriftenaufsatz
2012Texture evolution of HPT-processed Ni 50Mn 29Ga 21
Chulist, Robert; Böhm, Andrea; Rybacki, E.; Lippmann, T.; Oertel, C.-G.; Skrotzki, Werner
Konferenzbeitrag
2012Three-dimensional grain structure of sintered bulk strontium titanate from X-ray diffraction contrast tomography
Syha, M.; Rheinheimer, W.; Bäurer, M.; Lauridsen, E.M.; Ludwig, W.; Weygand, D.; Gumbsch, P.
Zeitschriftenaufsatz
2011Influence of the steel alloy composition on phase transitions and its applicability to hot forming process
Neugebauer, Reimund; Göschel, A.; Rautenstrauch, A.; Meza-Garcia, E.
Konferenzbeitrag
2011Interaction of boron suboxide with compacted graphite cast iron. Short communication
Freemantle, C.S.; Johnson, O.T.; Sigalas, I.; Herrmann, M.
Zeitschriftenaufsatz
2011Microstructural investigation of thermally sprayed ceramic coatings by laser acoustic surface waves
Barbosa, M.; Schneider, D.; Puschmann, R.; Toma, F.-L.; Berger, L.-M.
Konferenzbeitrag
2011Microstructure based fatigue analysis of cast components under variable amplitude loading
Eufinger, Jens; Heinrietz, Andre; Bruder, Thomas; Hanselka, Holger
Konferenzbeitrag
2011Microstructure characterization and imaging of fine-grainded steel by microscopic ultrasonic techniques
Hirsekorn, Sigrun; Rabe, Ute; Batista, Leonardo; Behl, L.
Konferenzbeitrag
2011Numerical homogenisation of an elasto-plastic model-material with large elastic strains: Macroscopic yield surfaces and the Eulerian normality rule
Schmidt, I.
Zeitschriftenaufsatz
2011Spark plasma sintering of TiCN nanopowders in non-linear heating and loading regimes
Zgalat-Lozynskyy, O.; Herrmann, M.; Ragulya, A.
Zeitschriftenaufsatz
2010Microstructure and texture in Ni50Mn29Ga21 deformed by high-pressure torsion
Chulist, R.; Skrotzki, W.; Oertel, C.-G.; Böhm, A.; Lippmann, T.; Rybacki, E.
Zeitschriftenaufsatz
2010Sintering and mechanical properties of AlMgB14 composite materials
Herrmann, M.; Bodkin, R.; Coville, N.J.; Thiele, M.
Zeitschriftenaufsatz
2010Strategies for numerical prediction of the uncertainty in the material response of solid foams
Hohe, J.; Beckmann, C.; Hardenacke, V.
Abstract
2010Strukturierung polymerer Oberflächen nach biologischem Vorbild
Jendrich, M.
: Krauß, H.; Mölders, N.
Diplomarbeit
2009Characterization of reactive nano scale multilayer foils for microsystem applications
Boettge, B.; Teuscher, N.; Schischka, J.; Krause, M.; Richter, S.; Heilmann, A.; Petzold, M.; Bagdahn, J.
Konferenzbeitrag
2009Identifikation schichtbestimmender Prozesskenngrößen bei der Verbundbildung in Aluminium-Magnesiumproben
Kunce, S.
Diplomarbeit
2009Makyoh-Imaging zur Charakterisierung reflektierender Oberflächen
Finck, A. von; Duparre, A.; Pfeffer, M.
Zeitschriftenaufsatz
2009Optimization of multilayered porous acoustic absorbers
Andrä, H.; Kabel, M.; Spies, M.; Rieder, H.
Konferenzbeitrag
20083D characterisation and modelling of fibrous materials
Wirjadi, O.; Malten, R.; Godehardt, M.; Sych, T.; Schladitz, K.; Redenbach, C.; Spies, M.
Poster
2008Anodic oxide formation on AA2024
Schneider, M.; Yezerska, O.; Lohrengel, M.M.
Zeitschriftenaufsatz
2008Eigenschaftsanalyse kaltgewalzter Hochverzahnungen
Hellfritzsch, U.; Lahl, M.; Schiller, S.
Konferenzbeitrag
2008High precision laser structuring of micro forming tools
Schubert, A.; Schneider, J.; Edelmann, J.; Burkhardt, T.; Groß, S.
Konferenzbeitrag
2008Monitoring of the friction stir welding process to describe parameter effects on joint quality
Jene, T.; Dobmann, G.; Wagner, G.; Eifler, D.
Zeitschriftenaufsatz, Konferenzbeitrag
2007Modeling the evolution of microstructure in single and dual phase polycrystalline
Butz, A.; Ripoll, M.R.; Benevolenski, O.
Konferenzbeitrag
2007Nondestructive mechanical release of ordered polymer microfiber arrays from porous templates
Grimm, S.; Schwirn, K.; Göring, P.; Knoll, H.; Miclea, P.T.; Greiner, A.; Wendorff, J.H.; Wehrspohn, R.B.; Gösele, U.; Steinhart, M.
Zeitschriftenaufsatz
2007The size effect on the creep properties of SnAgCu-solder alloys
Wiese, S.; Roellig, M.; Mueller, M.; Wolter, K.-J.; Bennemann, S.; Petzold, M.
Konferenzbeitrag
2006Compositional effects on the creep properties of SnAgCu solder
Wiese, S.; Krämer, F.; Müller, M.; Röllig, M.; Wolter, K.-J.; Krause, M.; Bennemann, S.; Petzold, M.
Konferenzbeitrag
2006Structure of superhard nanocrystalline (Ti,Al)N layers deposited by reactive pulsed magnetron sputtering
Zywitzki, O.; Klostermann, H.; Fietzke, F.; Modes, T.
Zeitschriftenaufsatz, Konferenzbeitrag, Zeitschriftenaufsatz
2006Third International Conference Multiscale Materials Modeling 2006. Proceedings
: Gumbsch, P.
Tagungsband
2006Verbesserung der Umformeigenschaften von schwer umformbaren Werkstoffen durch lokal vorinitialisierten Wärmeeintrag
Neugebauer, Reimund; Scheffler, S.; Poprawe, R.; Vitr, G.
Bericht
2005Alloying and sintering behaviour of selected iron-graphite-master alloy powder mixtures
Castro Pinto, F.; Sarasola, M.; Baumgaertner, F.; Dougan, M.; Mitchell, S.; Lipp, K.; Bender, H.; Coffin, C.; Dunkley, J.
Konferenzbeitrag
2005Different carbon based thin films and their microtribological behaviour in MEMS applications
Bandorf, R.; Lüthje, H.; Henke, C.; Wiebe, J.; Sick, J.-H.; Küster, R.
Zeitschriftenaufsatz
2005Investigation of structured TiAIN- and TiO2-coatings with moth-eye-like surface morphologies
Burmeister, F.; Schäffer, E.; Kleer, G.; Döll, W.; Bläsi, B.; Gombert, A.
Zeitschriftenaufsatz
2005Kombination von Stickstoff- und Kohlendioxidadsorption zur Charakterisierung von Mikroporenstrukturen
Schieferstein, E.; Heil, V.; Meller, K.
Zeitschriftenaufsatz
2005Local laser heat treatment of ultra high strength steels to improve formability
Vitr, G.; Scheffler, S.; Weisheit, A.; Wissenbach, K.
Konferenzbeitrag
2005Mikrofluidisches Mischen als Bestandteil mikroreaktionstechnischer Modellierung
Deerberg, G.; Grän-Heedfeld, J.; Hennig, T.; Weidner, E.
Zeitschriftenaufsatz
2005Phase formation in porous liquid phase sintered silicon carbide: Part II: Interaction between Y2O3 and SiC
Ihle, J.; Herrmann, M.; Adler, J.
Zeitschriftenaufsatz
2005Phase formation in porous liquid phase sintered silicon carbide: Part III: Interaction between Al2O3-Y2O3 and SiC
Ihle, J.; Herrmann, M.; Adler, J.
Zeitschriftenaufsatz
2005Power scaling of high-power fiber lasers and amplifiers
Tünnermann, A.; Höfer, S.; Liem, A.; Limpert, J.; Reich, M.; Röser, F.; Schreiber, T.; Zellmer, H.; Peschel, T.; Guyenot, V.
Zeitschriftenaufsatz
2005Static and fatigue properties of high strength PM-steels
Sigl, L.S.; Delarbre, P.; Lipp, K.; Sonsino, C.M.
Konferenzbeitrag
2005Tensile and fatigue evaluation of Ti-15Al-33Nb (at.%) and Ti-21Al-29Nb (at.%)alloys for biomedical applications
Boehlert, C.J.; Cowen, C.J.; Jaeger, C.R.; Niinomi, M.; Akahori, T.
Zeitschriftenaufsatz
2004Barkhausen noise and eddy current microscopy - a new scanning probe technique for microscale characterization of materials
Szielasko, K.; Lugin, S.; Kopp, M.; Altpeter, I.
Konferenzbeitrag
2004Corrosion behaviour of Si3N4 materials in sulphuric acid contaminated with KF
Schilm, J.; Herrmann, M.; Michael, G.
Konferenzbeitrag
2004Hot embossing of glass and metal
Schubert, A.; Rau, B.; Burkhardt, T.; Borck, J.
Konferenzbeitrag
2004Laser-patterning of thin films deposited on complex surfaces for the fabrication of micro-sensors
Biehl, S.; Lüthje, H.
Konferenzbeitrag
2004Synthesis of high-density MgO films by a novel magnetron sputtering system
Nam, K.H.; Jung, M.J.; Han, J.G.; Kopte, T.; Hartung, U.; Peters, C.
Zeitschriftenaufsatz
2003Acousto-thermal microstructure characterization
Meyendorf, N.; Rösner, H.; Frouin, J.; Maurer, J.; Sathish, S.
Konferenzbeitrag
2003Dynamic magnetostriction for material characterization of micro structure states of degraded structural steel
Pirfo, S.; Szielasko, K.; Altpeter, I.; Dobmann, G.
Konferenzbeitrag
2003Silver thick-film contacts on highly doped n-type silicon emitters: Structural and electronic properties of the interface
Ballif, C.; Huljic, D.M.; Willeke, G.; Hessler-Wyser, A.
Zeitschriftenaufsatz
2003Some fundamentals of optical thin film growth
Kaiser, N.
Aufsatz in Buch
2002Calculation of shape and experimental creation of AuSn solder bumps for flip chip applications
Hutter, M.; Oppermann, H.; Engelmann, G.; Wolf, J.; Ehrmann, O.; Aschenbrenner, R.; Reichl, H.
Konferenzbeitrag
2002Mechanical stress and thermal-elastic properties of oxide coatings for use in the deep-ultraviolet spectral region
Thielsch, R.; Gatto, A.; Kaiser, N.
Zeitschriftenaufsatz
2002Microstructure and properties of thermally sprayed silicon nitride-based coatings
Thiele, S.; Heimann, R.B.; Berger, L.-M.; Herrmann, M.; Nebelung, M.; Schnick, T.; Wielage, B.; Vuoristo, P.
Zeitschriftenaufsatz
2002Structure and defects of vapor-phase-grown diamond nanocrystals
Jiang, X.; Jia, C.L.
Zeitschriftenaufsatz
2001Microscopic formtesting of large area microstructures by means of formtesting interferometry
Schneefuß, K.; Pfeifer, T.
Konferenzbeitrag
2001Nondestructive characterization of fatigue damage with thermography
Rösner, H.; Sathish, S.; Meyendorf, N.
Konferenzbeitrag
2001Some new aspects of microstructural design of Beta-Si3N4 ceramics
Herrmann, M.; Schulz, I.; Hermel, W.; Schubert, C.; Wendt, A.
Zeitschriftenaufsatz
2000High quality heteroepitaxial diamond films on silicon
Jiang, X.; Fryda, M.; Jia, C.L.
Zeitschriftenaufsatz
2000High temperature oxidation and corrosion of silicon-based non-oxide ceramics
Klemm, H.; Herrmann, M.; Schubert, C.
Zeitschriftenaufsatz
2000High-temperature properties of Si3N4/SiC microcomposites
Klemm, Hagen; Herrmann, Mathias; Schubert, Christian
Zeitschriftenaufsatz, Konferenzbeitrag
2000Thermographic Characterization of the Material Microstructure Using Dissipative Effects
Rösner, H.; Meyendorf, N.; Sathish, S.
Konferenzbeitrag
1999Model combustor to assess the oxidation behavior of ceramic materials under real engine conditions
Filsinger, D.; Schulz, A.; Wittig, S.; Klemm, H.; Taut, C.; Wötting, G.
Konferenzbeitrag
1999Schwingfestigkeit induktionsgehärteter Bauteile aus AFP-Stählen
Kaufmann, H.; Sonsino, C.M.
Zeitschriftenaufsatz
1998AFM helps engineer low-scatter thin films
Duparre, A.; Kaiser, N.
Zeitschriftenaufsatz
1998Betriebsfestigkeitsverhalten einer Auswahl von nichtrostenden Stählen für den Anlagen- und Waggonbau. Abschlußbericht
Müller, F.; Sonsino, C.M.
Buch
1998Grain shape in sintered submicrometre alumina
Krell, A.; Obenaus, P.
Zeitschriftenaufsatz
1998Materials technology drives impeller design
Sonsino, C.M.
Zeitschriftenaufsatz
1998Microstructure and Texture Influences on Ultrasonic Quantities for Welding Stress Analysis
Arenz, U.; Schneider, E.
Konferenzbeitrag
1998Mikrostrukturelle Charakterisierung der von kurzen Lichtpulsen hoher Intensität hervorgerufenen Werkstoffveränderungen. Abschlußbericht
Franz, U.; Luft, A.; Kaspar, J.; Emsermann, A.
Bericht
1998Modeling parameter extraction for DNQ-Novolac thin film resists
Henderson, C.L.; Scheer, S.A.; Tsiartas, P.C.; Rathsack, B.M.; Sagan, J.P.; Dammel, R.R.; Erdmann, A.; Willson, C.G.
Konferenzbeitrag
1998Nondestructive Analysis of Stress States in Components using Micromagnetic and Ultrasonic Techniques - An Overview
Schneider, E.
Konferenzbeitrag
1998PM looks forward to pump impeller role
Sonsino, C.M.; Zieschang, R.; Arnhold, V.; Hofmann, B.; Gonia, D.; Sandritter, K.H.
Zeitschriftenaufsatz
1998Ein Verfahren zur Bemessung elektronenstrahlgehärteter Randschichten unter Wälzbeanspruchung
Schöpfel, A.
Dissertation
1997Hochverschleißfeste Schichten auf Stahl und Titan
Techel, A.; Nowotny, S.
Konferenzbeitrag
1997IFAM advancing MIM technology
Weber, M.; Petzoldt, F.; Hartwig, T.; Veltl, G.
Zeitschriftenaufsatz
1997Micro-structuring by laser beam removal
Hellrung, D.; Gillner, A.; Poprawe, R.
Konferenzbeitrag
1997Microstructure. Property relationships of thermoplast/thermoset adhesive blends
Ludwig, M.; Schäfer, H.; Hennemann, O.-D.; Petermann, J.
Konferenzbeitrag
1997Properties of SiO2 and Al2O3 films for use in UV-optical coatings
Thielsch, R.; Duparre, A.; Schulz, U.; Kaiser, N.
Konferenzbeitrag
1997Quantitative image analysis techniques for the evaluation of porosity
Laz, P.J.
Buch
1997Schwingfestigkeit von geschweißten Komponenten unter komplexen elasto-plastischen, mehrachsigen Verformungen
Sonsino, C.M.
Bericht
1996Development of high-strength P/M steels with optimized microstructure by new alloying and sintering techniques
Brandt, U.; Sonsino, C.M.; Engström, U.; Ernst, E.; Hoffmann, E.
Konferenzbeitrag
1996Dry etching and micromachining of precision Silicon components
Kreutz, E.W.; Pfleging, W.; Jandeleit, J.; Urbasch, G.
Konferenzbeitrag
1996Early detection of hydrogen-induced stress corrosion cracking using micromagnetic test methods
Lang, M.A.; Altpeter, I.; Dobmann, G.
Konferenzbeitrag
1996How sintering time and temperature influence fatigue
Lindner, K.-H.; Sonsino, C.M.
Aufsatz in Buch
1996Nondestructive evaluation of material parameters using neural networks
Fiedler, U.; Kröning, M.; Theiner, W.
Konferenzbeitrag
1995Double shear creep testing of superalloy single crystals at temperatures above 1000 degree C
Mayr, C.; Eggeler, G.; Webster, G.A.; Peter, G.
Zeitschriftenaufsatz
1995Fortschritte für Hochleistungs-Aluminiumoxid
Krell, Andreas
Aufsatz in Buch
1995Laser machining of Si3N4 ceramics
Burck, P.; Wiegel, K.
Zeitschriftenaufsatz
1995Light scattering of thin dielectric films
Duparre, A.
Aufsatz in Buch
1995Preparation of cubic boron nitride films by use of electrically conductive boron carbide targets
Lüthje, H.; Bewilogua, K.; Daaud, S.; Johansson, M.; Hultmann, L.
Zeitschriftenaufsatz
1995Schwingfestigkeit von hochfesten Feinkornbaustählen im brenngeschnittenen Zustand
Kaufmann, H.; Sonsino, C.M.; Schönherr, W.
Zeitschriftenaufsatz
1994Analysis of creep in a welded 'P91' pressure vessel
Eggeler, G.; Ramteke, A.; Coleman, M.; Chew, B.; Peter, G.; Burblies, A.; Hald, J.; Jefferey, C.; Rantala, J.; deWitte, M.; Mohrmann, R.
Zeitschriftenaufsatz
1994Beiträge zum Sinterverhalten von LaCrO3-Pulvern
Eichler, K.; Otschik, P.; Jaenicke-Rößler, K.
Buch
1994Einfluß der Sinterzeit und -temperatur auf das Schwingfestigkeitsverhalten des diffusionslegierten Sinterstahls Fe-4.0 Prozent Ni-1.5 Prozent Cu-0.5 Prozent Mo plus 0.6 Prozent C.
Lindner, K.-H.; Sonsino, C.M.
Zeitschriftenaufsatz
1994Einfluß von Härtungsparametern auf die Schwingfestigkeit von Gesenkschmiedeteilen
Kaufmann, H.; Ziemann, M.; Klemz, R.; Sonsino, C.M.
Zeitschriftenaufsatz
1994Herstellung hartmetallähnlicher Verschleißschutzschichten durch Laserauftragsschweißen von Hartstoff-Hartlegierungs-Pulvergemischen
Nowotny, S.; Techel, A.; Luft, A.; Reitzenstein, W.
Konferenzbeitrag
1994Hochfeste Keramiken auf Al2O3-Basis durch kontrollierte Korngrenzenstrukturen
Krell, A.; Seidel, J.
Konferenzbeitrag
1994How sintering time and temperature influence fatigue
Lindner, K.-H.; Sonsino, C.M.
Zeitschriftenaufsatz
1994How sintering time and temperature influence fatigue
Lindner, K.-H.; Sonsino, C.M.
Konferenzbeitrag
1994Microstructure and contours of crack tip crazes in PVC created under different loading conditions
Könczöl, L.; Döll, W.; Michler, G.H.; Enßlen, M.
Konferenzbeitrag
1994Microstructure and properties of SiCN-nanocomposites
Herrmann, M.; Klemm, H.; Schubert, C.; Hermel, W.; Millers, T.; Rendtel, A.
Aufsatz in Buch
1994Microstructure and properties of SiCN-nanocomposites
Herrmann, M.; Klemm, H.; Schubert, C.; Hermel, W.; Millers, T.; Rendtel, A.
Konferenzbeitrag
1994Schwingfestigkeit des diffusionslegierten Sinterstahls Fe-4.0%Ni-1.5%Cu-0.5%Mo+0.6%C in Abhängigkeit von der Sinterzeit und -Temperatur.
Sonsino, C.M.
Buch
1994Silicon nitride materials featured by superior creep and fracture resistance at 1400 degree
Klemm, H.; Herrmann, M.; Reich, T.; Schubert, C.
Konferenzbeitrag
1994Sinterability on doped lanthanum chromite
Eichler, K.; Syskakis, E.; Otschik, P.; Naoumidis, A.; Jaenicke-Rößler, K.
Konferenzbeitrag
1994Sintering and microstructure of Si3N4-materials
Hermel, W.; Herrmann, M.; Schulz, I.
Konferenzbeitrag
1994Struktur und Verschleißeigenschaften von Hartstoffbeschichtungen
Nowotny, S.; Techel, A.; Müller, A.; Luft, A.
Aufsatz in Buch
1993Densification, microstructure and properties of SiCN-nanocomposites
Herrmann, M.; Millers, T.; Rendtel, A.; Reich, T.; Boden, G.; Schubert, C.
Konferenzbeitrag
1993Determination of the dynamic material properties of shock-loaded silicon-nitride
Nahme, H.; Hohler, V.; Stilp, A.J.
Konferenzbeitrag
1993Eigenschaften und Gefügeuntersuchungen an gradierter Siliziumcarbid-Titancarbid-Keramik
Teichgräber, M.
Tagungsband
1993Have the limits of the development of Beta-Si3N4-materials already been reached?
Hermel, W.; Herrmann, M.; Schubert, C.
Konferenzbeitrag
1993Qualitätssicherung durch zerstörungsfreie Ermittlung des Werkstoffzustandes
Kröning, M.; Meyendorf, N.
Konferenzbeitrag
1993Redistribution of the liquid phase during sintering of silicon nitride
Herrmann, M.; Boberski, C.; Michael, G.; Putzky, G.; Hermel, W.
Zeitschriftenaufsatz
1993Schwingfestigkeit von hochfesten Feinkornbaustählen im brenngeschnittenen Zustand. Forschungsbericht.
Sonsino, C.M.; Kaufmann, H.; Müller, F.; Berghöfer, U.
Buch
1993Thermal stability of ultrafine grained and nanocrystalline metals
Kumpmann, A.; Günther, B.; Kunze, H.-D.
Konferenzbeitrag
1993Zerstörungsfreie Ermittlung des Werkstoffzustandes
Kröning, M.; Meyendorf, N.
Konferenzbeitrag
1992Einfluß von Härtungsparametern auf die Schwingfestigkeit von Gesenkschmiedeteilen
Kaufmann, H.; Sonsino, C.M.; Wetter, E.
Zeitschriftenaufsatz
1992Einfluß von Induktiv-Härtungsparametern auf die Schwingfestigkeit von Gesenkschmiedeteilen
Kaufmann, H.
Buch
1992First attempts towards the early detection of fatigued substructures using cyclic-loaded 20 MnMoNi 5 5 steel
Seibold, A.; Dobmann, G.
Zeitschriftenaufsatz
1992Structural and mechanical properties of niobium-containing amorphous hydrogenated carbon films (Nb-C:H)
Fryda, M.; Benndorf, C.; Klages, C.-P.; Taube, K.
Zeitschriftenaufsatz, Konferenzbeitrag
1991Acoustic nonlinearity in metal-matrix composites
Lee, D.; Mohrbacher, H.P.; Salama, K.; Schneider, E.
Konferenzbeitrag
1991Dispersion of hard particles in light alloys with Co2 laser radiation
Gasser, A.; Kreutz, E.W.; Krönert, K.; Lohmann, K.; Wissenbach, K.; Zografou, C.
Konferenzbeitrag
1991Einfluß der Laserbehandlung auf das Korrosionsverhalten vakuumplasmagespritzter Titan- und Niobschichten
Lugscheider, E.; Hofmann, D.; Jansen, F.; Nicoll, A.R.; Kreutz, E.W.; Wissenbach, K.; Gasser, A.
Konferenzbeitrag
1991Einfluß verschiedener Wärmebehandlungsverfahren auf die Schwingfestigkeit von PM-Sinterstählen
Sonsino, C.M.
Zeitschriftenaufsatz
1991Electrical conductivity and microstructure of metal-containing a-C-H films.
Benndorf, C.; Boettger, E.; Fryda, M.; Haubold, H.G.; Köberle, H.; Klages, C.-P.
Konferenzbeitrag
1991Microstructure and wear behaviour of metal-containing diamond-like coatings
Dimigen, H.; Klages, C.-P.
Zeitschriftenaufsatz, Konferenzbeitrag
1990Einfluß verschiedener Wärmebehandlungsverfahren auf die Schwingfestigkeit von PM-Sinterstählen
Sonsino, C.M.
Konferenzbeitrag
1990Lifetime prediction in high temperature component.
Bressers, J.; Danzer, R.; Gerold, V.; Guttmann, V.; Henderson, J.; Schneider, K.; Hollstein, T.
Konferenzbeitrag
1990Nondestructive stress and microstructure analysis by ultrasonic
Höller, P.; Schneider, E.; Willems, H.
Konferenzbeitrag
1990Surface melting of AlSi10Mg with Co2 laser radiation
Backes, G.; Gasser, A.; Kreutz, E.W.; Ollier, B.; Pirch, N.; Rozsoki, M.; Wissenbach, K.
Konferenzbeitrag
1989The short-range-order of mechanically alloyed amorphous Ni-Zr. A comparison of experiment and simulation
Petzoldt, F.; Burblies, A.
Zeitschriftenaufsatz
1989Strain rate dependence of mechanical behaviour and evaluation of the microstructure of tungsten monocrystals
Chiem, C.Y.; Meyer, L.W.
Konferenzbeitrag
1988Electron-beam welding of precipitation hardened nickel-base superalloys - assessment of weldability using metallurgical methods
Busch, W.-B.; Kunze, H.-D.
Konferenzbeitrag
1988Evaluation of residual stress states in welded parts - Using ultrasonic techniques
Schneider, E.
Aufsatz in Buch
1988Impact loading and dynamic behaviour of materials. Vol.1
: Meyer, L.W.; Kunze, H.-D.; Chiem, C.Y.
Tagungsband
1988Influence of regeneration treatments on creep rupture lifes of turbine blades
Wortmann, J.; Busch, W.-B.
Aufsatz in Buch
1988Preparation of bulk amorphous Ni60Nb40.
Petzoldt, F.; Scholz, B.; Kunze, H.-D.; Held, M.
Konferenzbeitrag
1988Production of amorphous Ni-Zr powder by mechanical alloying of pure elements and by milling of intermetallic compounds
Petzoldt, F.; Scholz, B.; Kunze, H.-D.
Abstract
1987Evaluation of residual stress states in welded plates using ultrasonic techniques
Chu, S.-L.; Peukert, H.; Schneider, E.
Aufsatz in Buch
1985Fatigue life of superplastically formed Ti-6Al-4V
Busch, W.-B.; Kunze, H.-D.
Konferenzbeitrag