Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2015Gear manufacturing by forming net-shape technologies
Landgrebe, Dirk; Sterzing, Andreas; Popp, Mike; Schuster, Robert; Schiller, Sven; Milbrandt, Matthias
Konferenzbeitrag
2010Aktive Systeme zur Schwingungsminderung und Reduktion von Schallemissionen
Linke, M.; Bräunig, J.; Kunze, H.
Konferenzbeitrag
2010Gear rolling technology
Neugebauer, Reimund; Hellfritzsch, U.; Lahl, M.; Schiller, S.; Milbrandt, M.
Vortrag
2008Advanced process limits by rolling of helical gears
Neugebauer, Reimund; Hellfritzsch, U.; Lahl, M.
Konferenzbeitrag, Zeitschriftenaufsatz
2007Evaluation of the fatigue behaviour of new PM-materials for highly loaded gears
Lipp, K.; Bender, H.J.; Baumgaertner, F.; Castro Pinto, F.; Sonsino, C.M.
Konferenzbeitrag
2007Improved process design and quality for gear manufacturing with flat and round rolling
Neugebauer, Reimund; Putz, M.; Hellfritzsch, U.
Konferenzbeitrag
2006Characterization of ageing behaviour of environmentally acceptable lubricants based on trimethylolpropane esters
Hahn, S.; Dott, W.; Eisenträger, A.
Zeitschriftenaufsatz
2005Fatigue design of PM-gears under consideration of herzian pressure with sliding and tooth bending
Sonsino, C.; Lipp, K.
Tagungsband
2005Local assessment concepts for the structural durability of complexe loaded components
Sonsino, Cetin Morris; Fischer, Gerhard
Konferenzbeitrag
2005Structural durability of cast aluminium gearbox housings of underground railway vehicles under variable amplitude loading
Sonsino, C.
Zeitschriftenaufsatz, Konferenzbeitrag
2004Design of PM-gears basing on local bending and rolling contact fatigue data
Lipp, K.
Konferenzbeitrag
2004Low-vibration gearbox- a comparison of two different numerical optimization strategies
Bös, J.
Konferenzbeitrag
2004Numerical structural acoustic optimization of a gearbox
Bös, J.
Konferenzbeitrag
2003Design for roling contact fatigue
Lipp, K.; Hoffmann, G.
Zeitschriftenaufsatz
2003Experimental and numerical durability analysis from loading to material and component behavior
Bruder, T.; Kaufmann, H.; Sonsino, C.M.
Buch
2003Fatigue design concepts for P/M parts and required material data
Sonsino, C.M.
Buch
2003Numerical simulation of the fatigue lifetime of a powder metallurgical gear based on the green density distribution
Kraft, T.; Riedel, H.
Konferenzbeitrag
2003Structural durability of cast aluminium gearbox housings of underground railway vehicles under variable amplitude loading
Sonsino, C.
Konferenzbeitrag
2000Cost reduction by using new Ni-free PM steels
Lipp, K.; Bas, J.; Blanchard, C.; Johansson, M.; Baum, U.
Konferenzbeitrag
1999Rolling contact fatigue properties of selected PM-materials for gear-box applications
Sonsino, C.M.; Lipp, K.
Bericht
1997Fatigue strength of driving shafts of automatic transmission gearboxes under operational torques
Sonsino, C.M.; Kaufmann, H.; Foth, J.; Jauch, F.
Bericht
1997Fatigue strength of driving shafts of automatic transmission gearboxes unter operational torques
Sonsino, C.M.; Kaufmann, H.; Foth, J.; Jauch, F.
Zeitschriftenaufsatz
1996Belastungsanalyse manuell geschalteter Fahrzeuggetriebe - Voraussetzung zur beanspruchungsgerechten Dimensionierung
Best, R.; Klätschke, H.
Konferenzbeitrag