Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Development of a Friction Welded Joint for Future Industrial Application
Schubert, Nadine; Sterzing, Andreas; Mauermann, Reinhard; Hilbers, Sören; Kolbe, Peter; Kuhn, Christian
Konferenzbeitrag
2019Methodology for the design of recursively axially formed rotor shafts made of two or more combined segments
Kurth, Robin; Tehel, Robert; Päßler, Thomas; Wagner, Henning; Beihofer, Dennis
Zeitschriftenaufsatz, Konferenzbeitrag
2019Modeling elastic behavior of forming machine components to reduce tool manufacturing time
Tehel, Robert; Päßler, Thomas; Mihm, Matthias
Zeitschriftenaufsatz, Konferenzbeitrag
2019Production planning for optimal mass pre-distribution for axial feed cross rolling
Schubert, Nadine; Steger, Jürgen; Gerlach, Marcel; Lorenz, Bernd
Zeitschriftenaufsatz, Konferenzbeitrag
2018Principal component analysis and singular value decomposition used for a numerical sensitivity analysis of a complex drawn part
Schwarz, Christian; Ackert, Patrick; Mauermann, Reinhard
Zeitschriftenaufsatz
2017Characterization of an electrochemical machining process for precise internal geometries by multiphysics simulation
Hackert-Oschätzchen, Matthias; Paul, Rafael; Kowalick, Michael; Kuhn, Danny; Meichsner, Gunnar; Zinecker, Mike; Schubert, Andreas
Zeitschriftenaufsatz, Konferenzbeitrag
2017Consistent simulation strategy for heat sources and fluxes in milling
Putz, Matthias; Oppermann, Christian; Semmler, Ulrich; Bräunig, Michael; Karagüzel, Umut
Zeitschriftenaufsatz, Konferenzbeitrag
2017FE simulation in production engineering - comparison between conventional FEM and adaptive FEM
Pourtavakoli, Hamzeh
: Oppermann, Christian
Master Thesis
2017Heat sources and fluxes in milling: Comparison of numerical, analytical and experimental results
Putz, Matthias; Oppermann, Christian; Bräunig, Michael; Karagüzel, Umut
Zeitschriftenaufsatz, Konferenzbeitrag
2017Investigation of cleavage fracture under dynamic loading conditions: Part II numerical analysis
Tlatlik, J.
Zeitschriftenaufsatz
2017Systematic analysis of coating-substrate interactions in the presence of flow localization
Isakov, Matti; Matikainen, V.; Koivuluoto, H.; May, Michael
Zeitschriftenaufsatz
2016Automatic Calibration of Substitute Mechanical Loads Using the Example of Joining Distortion
Ackert, Patrick; Schwarz, Christian
Zeitschriftenaufsatz
2016The concept and implementation of smooth generic camera calibration
Pak, A.
Konferenzbeitrag
2016Granulation of extruded plastic wires: Influence of tool coating properties and tool geometry on cutting forces and tool wear
Cardone, Macario; Putz, Matthias; Schmidt, Gerhard; Dix, Martin; Friedrich, Jürgen; Stockmann, Erich
Konferenzbeitrag
2016Improving performance of turn-milling by controlling forces and thermally induced tool-center point (TCP) displacement
Putz, Matthias; Ihlenfeldt, Steffen; Karaguzel, Umut; Semmler, Ulrich; Budak, Erhan; Bakkal, Mustafa; Wertheim, Rafael
Konferenzbeitrag, Zeitschriftenaufsatz
2016Micromechanical finite element modeling of long fiber reinforced thermoplastics
Fliegener, Sascha
: Gumbsch, P.; Böhlke, T.
Dissertation
2016Modeling of heat fluxes during machining and their effects on thermal deformation of the cutting tool
Putz, Matthias; Schmidt, Gerhard; Semmler, Ulrich; Oppermann, Christian; Bräunig, Michael; Karagüzel, Umut
Zeitschriftenaufsatz, Konferenzbeitrag
2016Three dimensional image-based simulation of ultrasonic wave propagation in polycrystalline metal using phase-field modeling
Nakahataa, K.; Sugahara, H.; Barth, Martin; Köhler, Bernd; Schubert, Frank
Zeitschriftenaufsatz
2015Advancement of tooling for spark plasma sintering
Giuntini, Diletta; Räthel, Jan; Herrmann, Mathias; Michaelis, Alexander; Olevsky, Eugene A.
Zeitschriftenaufsatz
2015Co-simulations of discrete and finite element codes
Dehning, C.; Bierwisch, C.; Kraft, T.
Konferenzbeitrag
2015Heat flux in cutting: Importance, simulation and validation
Putz, Matthias; Schmidt, Gerhard; Semmler, Ulrich; Dix, Martin; Brockmann, Matthias; Bräunig, Michael; Gierlings, Sascha
Zeitschriftenaufsatz, Konferenzbeitrag
2015Improving the ramp-up process of a body-construction line by numerical supported design of clamping devices and FEM based tolerance prognosis
Landgrebe, Dirk; Ackert, Patrick; Grützner, Raik; Weber, Johannes; Mauermann, Reinhard; Tegtmeier, André
Konferenzbeitrag
2015Mathematical optimization of clamping processes in car-body production
Hofmann, Andre; Rössinger, Markus; Ackert, Patrick; Schwarz, Christian; Landgrebe, Dirk
Vortrag
2015Numerical representation of a complete body construction process chain, focusing on new approaches for integrating the drying process
Ackert, Patrick; Perera, Chulaka; Grützner, Raik; Mauermann, Reinhard; Fichtner, Isabell; Landgrebe, Dirk
Konferenzbeitrag
2015Tolerances and measuring strategies in the virtual process chain for spot welded structures
Ackert, Patrick; Schwarz, C.; Mauermann, Reinhard; Landgrebe, Dirk
Konferenzbeitrag
2014Analysis of key properties for optical power limiting and the influence of nonlinear scattering
Körber, Michael; Azarian, Adrian; Schwarz, Bastian; Eberle, Bernd
Konferenzbeitrag
2014Helical gear manufacturing by net-shape-technology-potentials and challenges
Drossel, Welf-Guntram; Sterzing, Andreas; Hellfritzsch, Udo; Milbrandt, Matthias
Konferenzbeitrag
2014Roller hemming simulation: State of the art and application limits
Neugebauer, Reimund; Drossel, Welf-Guntram; Rössinger, Markus; Eckert, Alexander; Hecht, Benjamin
Konferenzbeitrag
2013Computational design of multifunctional composites made of shape memory alloys and fibre reinforced plastics
Senf, Björn; Eppler, Christoph; Bucht, Andre; Navarro Y De Sosa, Iñaki; Kunze, Holger; Pagel, Kenny
Konferenzbeitrag
2013Improving surface based clamping simulations by measuring the position of active surfaces during the clamping process
Drossel, Welf-Guntram; Schützle, Wilhelm; Ackert, Patrick; Wahl, Martin; Schulz, Frank; Mauermann, Reinhard
Konferenzbeitrag
2013Local-global approach using experimental and/or simulated data to predict distortion caused by mechanical joining technologies
Eckert, Alexander; Israel, Markus; Neugebauer, Reimund; Rösinger, Markus; Wahl, Martin; Schulz, F.
Zeitschriftenaufsatz
2013On the exploitation of Armstrong-Frederik type nonlinear kinematic hardening in the numerical integration and finite-element implementation of pressure dependent plasticity models
Metzger, M.; Seifert, T.
Zeitschriftenaufsatz
2013Position-dependent dynamics and stability of serial-parallel kinematic machines
Law, M.; Ihlenfeldt, Steffen; Wabner, Markus; Altintas, Yusuf; Neugebauer, Reimund
Zeitschriftenaufsatz, Konferenzbeitrag
2013Predicting dimensional accuracy of laser welded aluminum add-on body parts
Neugebauer, Reimund; Wahl, Martin; Schulz, Frank; Schützle, Wilhelm; Werner, Stephan; Bernhardi, Otto Ernst; Mauermann, Reinhard
Konferenzbeitrag
2013Study of the influences of laser parameters on laser assisted machining processes
Tagliaferri, Flaviana; Leopardi, Giacomo; Semmler, Ulrich; Kuhl, Michael; Palumbo, Biagio
Konferenzbeitrag
2013Study of the influences of laser parameters on laser assisted machining processes
Tagliaferri, Flaviana; Leopardi, Giacomo; Semmler, Ulrich; Kuhl, Michael; Palumbo, Biagio
Konferenzbeitrag, Zeitschriftenaufsatz
2012Cast iron cutting with nano TiN and multilayer TiN-CrN coated inserts
Semmler, Ulrich; Perucca, Massimo; Comoglio, Mauro; Fuentes, Gonzalo G.; Almandoz, Eluxka; Rüger, Carlo
Konferenzbeitrag
2012Developing a model for the bond heel lifetime prediction of thick aluminium wire bonds
Merkle, L.; Sonner, M.; Petzold, M.
Zeitschriftenaufsatz
2012Finite element characterization of d15 shear piezoelectric macro-fibre composites. Poled in longitudinal direction
Kranz, Burkhard; Gajewski, Benoit; Benjeddou, Ayech; Drossel, Welf-Guntram
Vortrag
2012Nonlinear piezoelectric model based on switching processes and its Finite Element formulation
Kaltenbacher, M.; Nicolai, M.; Kaltenbacher, B.; Schönecker, A.
Konferenzbeitrag
2012Simulation of Adaptive Structures Made of Textile and Shape Memory Alloy
Drossel, Welf-Guntram; Ohsenbrügge, Christoph; Oschatz, H.; Rotsch, Christian; Senf, Björn
Vortrag
2011Advanced calculation of static and dynamic stiffness in mechatronic machine tools
Neugebauer, Reimund; Scheffler, Christian; Wabner, Markus; Zwingenberger, Carsten
Zeitschriftenaufsatz
2011Application limits of a method to predict distortion caused by mechanical joining technologies in car body construction
Neugebauer, Reimund; Rössinger, Markus; Wahl, Martin; Schulz, F.; Hofmann, A.; Eckert, Alexander; Hecht, Benjamin
Konferenzbeitrag
2011Approximate analytical solution for the temperature field in welding
Roshyara, Nab Raj; Wilhelm, Gerald; Semmler, Ulrich; Meyer, A.
Zeitschriftenaufsatz
2011The atomic finite element method as a bridge between molecular dynamics and cintinuum mechanics
Neugebauer, Reimund; Wertheim, Rafael; Semmler, Ulrich
Zeitschriftenaufsatz
2011Round rolling process of spur gears
Neugebauer, Reimund; Müller, Roland; Hellfritzsch, Udo; Lahl, Mike; Schiller, Sven; Milbrandt, Matthias; Druwe, Thomas
Konferenzbeitrag
2011Surgical stent planning - simulation parameter study for models based on DICOM standards
Scherer, S.; Treichel, T.; Ritter, N.; Triebel, G.; Drossel, W.-G.; Burgert, O.
Zeitschriftenaufsatz
2010Adaptive fixture for thin walled aerospace parts using FE analysis
Neugebauer, Reimund; Hochmuth, C.; Semmler, U.; Merlo, A.; Salvi, E.; Lorio, E.
Konferenzbeitrag
2010The atomic finite element method as a bridge between molecular dynamics and continuum-mechanics
Neugebauer, Reimund; Wertheim, R.; Semmler, U.
Vortrag
2010An extended procedure for convective boundary conditions on transient thermal simulations of machine tools
Neugebauer, Reimund; Ihlenfeldt, S.; Zwingenberger, C.
Zeitschriftenaufsatz
2010FAE modeling of coated forming tools
Neugebauer, Reimund; Wertheim, R.; Hochmuth, C.; Schmidt, G.; Oppermann, C.
Konferenzbeitrag
2010Modelling of atomic structures in nano-layers using the finite element method
Neugebauer, Reimund; Wertheim, R.; Semmler, U.
Konferenzbeitrag
2010Modelling of energy and resource-efficient machining
Neugebauer, Reimund; Wertheim, R.; Hochmuth, C.; Schmidt, G.; Dix, M.
Konferenzbeitrag
2010On finite element simulation of magnetostrictive actuators
Kurch, M.; Herold, S.
Konferenzbeitrag
2010Principle investigation of the stiffness- and friction influences on the simulation of functioning tests for flight control surfaces by means of a combined Multibody/FE simulation
Landwehr, Ulli
: Rikeit, Horst-Erich; Kienzler, Reinhold
Diplomarbeit
2010Simulation of workpiece deformation caused by machining and clamping forces
Neugebauer, Reimund; Vogel, E.; Hochmuth, C.; Schmidt, G.; Nebel, D.
Konferenzbeitrag
2010Thermoelectric properties as a function of electronic band structure and microstructure of textured materials
Jacquot, A.; Farag, N.; Jägle, M.; Bobeth, M.; Schmidt, J.; Ebling, D.; Böttner, H.
Zeitschriftenaufsatz
2009Calculation of stresses in two- and three-dimensional structures generated by induction assisted laser cladding
Brückner, F.; Lepski, D.; Beyer, E.
Konferenzbeitrag
2009Investigations on the adjustment of the modelling section in 2D simulations of milling processes
Uhlmann, E.; Mattes, A.; Graf von der Schulenburg, M.; Gerstenberger, R.
Zeitschriftenaufsatz
2009Materials simulation
Gumbsch, P.; Götz, T.
Aufsatz in Buch
2008Investigation into the strength of components made of UFG aluminium alloys
Lang, H.; Bruzek, B.; Leidich, E.; Semmler, U.
Konferenzbeitrag
2008Kopplung von ANSYS und MATLAB
Berger, J.
Diplomarbeit
2008Simulation based development of the clinch connection with a plane surface on the die side
Awiszus, B.; Beyer, U.; Todtermuschke, M.; Riedel, F.
Konferenzbeitrag
2008Topologieoptimierung im Leichtbau
Reinwardt, M.
Diplomarbeit
2007Finite element simulations of the cyclic elastoplastic behaviour of copper thin films
Siska, F.; Forest, S.; Gumbsch, P.; Weygand, D.
Zeitschriftenaufsatz
2007Investigations to new fixturing principles for aerospace structures
Leopold, J.; Clauß, D.; Klärner, M.; Poppitz, A.; Baldoli, M.; Merlo, A.; Gimenez, M.; Larranaga, J.
Konferenzbeitrag
2007Modelling and simulation of nozzle guide vanes considering mechanic-thermal loads of grinding
Klärner, M.
Diplomarbeit
2006Computational modelling of crack initiation in a mixing tee subjected to thermal fatigue load
Varfolomeyev, I.
Konferenzbeitrag
2006Hybrid methods for analyzing burr formation in 2D-orthogonal cutting
Leopold, J.; Stoll, A.; Neugebauer, Reimund
Konferenzbeitrag
2006Modeling approaches for active systems
Herold, S.; Atzrodt, H.; Mayer, D.; Thomaier, M.
Konferenzbeitrag
2006Multi-scale simulations of rearrangement effects and anisotropic behavior during sintering
Wonisch, A.; Kraft, T.; Riedel, H.
Konferenzbeitrag
2005Kontinuumsmechanische Erweiterung der Ultraschallspannungsanalyse zur Beschreibung des Spannungszustandes im gesamten Bauteil
Längler, F.; Schneider, E.
Konferenzbeitrag
2005Modeling and simulation of burr formation - State of the art and future trends
Leopold, J.; Freitag, H.; Hoyer, K.; Schmidt, G.
Konferenzbeitrag
2005Modellierung von Größeneinflüssen bei der Gratbildung
Stoll, A.; Neugebauer, Reimund; Leopold, J.
Konferenzbeitrag
2005Noise insulation applying active elements onto facades
Bein, T.; Bös, J.; Doll, T.; Kurtze, L.
Konferenzbeitrag
2004Determination of residual stress in glass frit bonded MEMS by finite element analysis
Ebert, M.; Bagdahn, J.
Konferenzbeitrag
2002Design and fabrication of a novel low cost hotplate micro gas sensor
Hildenbrand, J.; Wöllenstein, J.; Spiller, E.; Kühner, G.; Böttner, H.; Urban, G.; Korvink, J.G.
Konferenzbeitrag
2002Substitution of conventionally double pressed and double sintered synchronizer hubs by warm powder compaction
Ratzi, R.; Sonsino, C.M.
Konferenzbeitrag
2001Hybrid polymer/silica thermo-optic vertical coupler switches
Keil, N.; Yao, H.H.; Zawadzki, C.; Lösch, K.; Satzke, K.; Wischmann, W.; Wirth, J.V.; Schneider, J.; Bauer, J.; Bauer, M.
Zeitschriftenaufsatz, Konferenzbeitrag
2001Integrated thermo-optic switches in silica/polymer waveguide technology
Yao, H.H.; Keil, N.; Zawadzki, C.; Lösch, K.; Satzke, K.; Wischmann, W.; Wirth, J. van; Bauer, J.; Bauer, M.; Schneider, J.
Konferenzbeitrag
1990Fatigue design of sintered con-rods
Sonsino, C.M.
Bericht