Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2013Modeling of deformation and failure behavior of dissimilar resistance spot welded joints under shear, axial and combined loading conditions
Burget, S.; Sommer, S.
Konferenzbeitrag
2011Multiaxial fatigue behaviour of a short-fibre reinforced polyamide - Experiments and calculations
Moosbrugger, E.; Demonte, M.; Jaschek, K.; Fleckenstein, J.; Büter, A.
Zeitschriftenaufsatz
2003A failure criterion for interface notches in silicon/glass anodic bonds
Knaup, M.; Busch, M.; Bagdahn, J.; Maschke, H.-G.
Konferenzbeitrag
2001Fatigue validation of safety components
Fischer, G.; Wessling, U.; Grubisic, V.
Konferenzbeitrag
1999Fatigue behaviour of sintered materials and components under operational service
Sonsino, C.M.
Konferenzbeitrag
1999Fatigue strength of spot welded stainless steel components for railway carriages under operational loading conditions. Final report
: Budano, S.; Salvini, P.; Vivio, F.; Rupp, A.
Bericht
1999Interim fatigue design recommendations of fillet welded joints under complex loading
Maddox, S.J.; Razmjoo, G.; Sonsino, C.M.
Buch
1998Durability approval of leaf springs under operational loading
Fischer, G.; Streicher, M.; Grubisic, V.
Bericht
1998Fatigue behaviour of sintered materials and components under operational service
Sonsino, C.M.
Konferenzbeitrag
1998Procedure of validation tests in air springs for commercial vehicles
Fischer, G.; Streicher, M.; Grubisic, V.
Bericht
1997An approximate formula for calculating the probability of failure
Filippini, M.; Dieterich, K.
Buch
1997Hypervelocity Penetration of Tungsten Alloy Rods into Ceramic Tiles: Experiments and 2-D Simulations
Rosenberg, Z.; Dekel, E.; Hohler, V.; Stilp, A.J.; Weber, K.
Zeitschriftenaufsatz
1997Methodology for effective design evaluation and durability approval of car suspension components
Grubisic, V.; Fischer, G.
Bericht
1997Transferability of material data for the example of a randomly loaded forged truck stub axle
Sonsino, C.M.; Kaufmann, H.; Grubisic, V.
Zeitschriftenaufsatz
1997Transferability of material data for the example of a randomly loaded forged truck stub axle
Sonsino, C.M.; Kaufmann, H.; Grubisic, V.
Bericht
1996Cutting mechanism in the milling process of carbon fibre reinforced plastics
Würtz, C.; Rummenhöller, S.; Klocke, F.
Konferenzbeitrag
1996Fatigue design of high loaded PM parts. Part 1
Sonsino, C.M.
Zeitschriftenaufsatz
1996Fatigue design of high loaded PM parts. Part 2
Sonsino, C.M.
Zeitschriftenaufsatz
1995Übertragbarkeit von Werkstoffkennwerten am Beispiel eines betriebsfest auszulegenden geschmiedeten Nutzfahrzeug-Achsschenkels
Sonsino, C.M.; Kaufmann, H.; Grubisic, V.
Zeitschriftenaufsatz
1992Einflußgrößen der Betriebsfestigkeit geschmiedeter Bauteile
Grubisic, V.; Sonsino, C.M.
Aufsatz in Buch
1992Einflußgrößen der Betriebsfestigkeit geschmiedeter Bauteile
Grubisic, V.; Sonsino, C.M.
Zeitschriftenaufsatz