Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2017Study on fatigue crack initiation and propagation from forging defects
Varfolomeev, I.; Moroz, S.; Siegele, D.; Kadau, K.; Amann, C.
Zeitschriftenaufsatz, Konferenzbeitrag
2016Cyclic deformation behavior of austenitic Cr-Ni-steels in the VHCF regime. Pt.I - Experimental study
Grigorescu, Andrei; Hilgendorff, Philipp-Malte; Zimmermann, Martina; Fritzen, Claus-Peter; Christ, Hans-Jürgen
Zeitschriftenaufsatz
2016Enhancement of the fatigue strength assessment of welded components by consideration of mean and residual stresses in the crack initiation and propagation phases
Baumgartner, Jörg
Zeitschriftenaufsatz
2016Experimental and numerical study on crack initiation under fretting fatigue loading
Luke, M.; Burdack, M.; Moroz, S.; Varfolomeev, I.
Zeitschriftenaufsatz
2015Crack initiation and propagation analysis at welds
Baumgartner, Jörg; Waterkotte, R.
Zeitschriftenaufsatz
2015Small-scale multiaxial setup for damage detection into the very high cycle fatigue regime
Straub, T.; Berwind, M.F.; Kennerknecht, T.; Lapusta, Y.; Eberl, C.
Zeitschriftenaufsatz
2014Damage evolution and crack growth in nickel-based alloys during ultrasonic fatigue
Zimmermann, Martina; Kolyshkin, Anton; Stöcker, Christian; Jones, J. Wayne; Christ, Hans-Jürgen
Konferenzbeitrag
2011Overload effects on a ferritic-baintic steel and a cast aluminium alloy: Two very different behaviours
Saintier, N.; Palin-Luc, T.; Bidonard, H.; Dsoki, Chalid el; Kaufmann, Heinz; Dumas, Christian; Völlmecke, F.J.; Sonsino, Cetin Morris
Zeitschriftenaufsatz
2011Overload effects on a ferritic-baintic steel and a cast aluminium alloy: Two very different behaviours
Sonsino, Cetin Morris; Kaufmann, Heinz; Palin-Luc, T.; Saintier, N.; Dsoki, Chalid el; Dumas, Christian; Völlmecke, F.J.
Konferenzbeitrag
2009Comparison of overload effects under variable amplitude loading on a steel sheet and a cast aluminium alloy
Bidouard, H.; Saintier, N.; Palin-Luc, T.; Dumas, C.; Dsoki, C. el; Kaufmann, H.; Sonsino, C.M.; Völlmecke, F.J.
Konferenzbeitrag
2008Effects of LCF on the HCF life of notched specimen in ferritic-bainitic steel
Biduard, H.; Palin-Luc, T.; Saintier, N.; Dumas, C.; Dsoki, C. el; Kaufmann, H.; Sonsino, C.M.
Konferenzbeitrag
2007Numerical analysis of crack propagation during the burr formation process of metals
Regel, J.; Stoll, A.; Leopold, J.
Konferenzbeitrag
2006Computational modelling of crack initiation in a mixing tee subjected to thermal fatigue load
Varfolomeyev, I.
Konferenzbeitrag
2003Experimental durability analysis and fatigue analysis of weldments
Bruder, T.; Kaufmann, H.
Tagungsband
2002Assessment of local multiaxial stresses on a cast aluminium truck wheel under complex service loading and fatigue life evaluation
Küppers, M.; Sonsino, C.M.; Fischer, G.; Störzel, K.
Konferenzbeitrag
2002Principles of variable amplitude fatigue design and testing
Sonsino, C.M.
Konferenzbeitrag
2001Fatigue crack initiation and growth in AlMg4.5Mn butt weldments
Sonsino, C.M.; Brandt, U.; Lawrence, F.
Zeitschriftenaufsatz
2001Fatigue validation of safety components
Fischer, G.; Wessling, U.; Grubisic, V.
Konferenzbeitrag
2001High-strength steels in welded state for lightweight constructions under high and variable stress peaks
Demofonti, G.; Riscifuli, S.; Sonsino, C.M.; Kaufmann, H.; Sedlacek, G.; Müller, C.; Hanus, F.; Wegmann, H.G.
Buch
2001Influence of load and deformation-controlled multiaxial tests on fatigue life to crack initiation
Sonsino, C.M.
Zeitschriftenaufsatz
2001Multiaxial fatigue of welded joints under constant and variable amplitude loadings
Sonsino, C.M.; Küppers, M.
Zeitschriftenaufsatz
2000Fatigue design with cast magnesium alloys
Sonsino, C.M.; Dieterich, K.; Wenk, L.
Konferenzbeitrag
1999Fatigue assessment of aluminium weldments by different stress concentration
Brandt, U.; Lawrence, F.V.; Sonsino, C.M.
Konferenzbeitrag
1999Fatigue assessment of welded joints in AlMg 4,5Mn aluminium alloy (AA 5083) by local approaches
Sonsino, C.M.; Radaj, D.; Brandt, U.; Lehrke, H.-P.
Zeitschriftenaufsatz
1998Fatigue assessment of welded joints in AlMg4.5Mn aluminium alloy by local approaches
Sonsino, C.M.; Radaj, U.; Brandt, U.; Lehrke, H.P.
Buch
1998The fatigue behaviour of 5 and 25 mm 5083 aluminium-alloy weldments
Brandt, U.; Lawrence, F.V.; Sonsino, C.M.
Buch
1998Influence of load- and deformation-controlled multiaxial tests on fatigue life of crack initiation
Sonsino, C.M.
Konferenzbeitrag
1997Betriebsfestigkeitsuntersuchung an Karosserieteilsystemen
Sigwart, A.; Müller, J.; Oppermann, H.
Konferenzbeitrag
1997On the use of the weight function approach to study fatigue crack growth in cast iron components
Fontanari, V.; Sonsino, C.M.; Kaufmann, H.
Konferenzbeitrag
1992Structures designed for operational loadings
Buxbaum, O.
Aufsatz in Buch
1991Anrissermittlung mit dem Gleichstrom-Potentialsonden-Verfahren
Müller, F.
Buch
1991Betriebsfeste Bemessung von Punktschweissverbindungen im Fahrzeugbau
Rupp, A.
Konferenzbeitrag
1991Fatigue life prediction for large size components
Sonsino, C.M.
Konferenzbeitrag
1991Procedures for fatigue life prediction
Buxbaum, O.
Konferenzbeitrag
1990Crack growth under primary and secondary creep conditions, numerical and experimental investigations
Hollstein, T.; Kienzler, R.
Konferenzbeitrag
1990Fatigue behaviour of large forgings containing natural defects
Berger, C.; Mayer, K.H.; Hollstein, T.
Konferenzbeitrag
1989Impact loading and crack arrest
Schmitt, W.; Böhme, W.
Konferenzbeitrag
1985Acoustic emission monitoring during thermal shock fatigue with an acoustic emission signal parameter processor
Hepp, K.; Höller, P.; Waschkies, E.
Konferenzbeitrag
1985Fatigue life of superplastically formed Ti-6Al-4V
Busch, W.-B.; Kunze, H.-D.
Konferenzbeitrag