Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2018Advanced BBr3 diffusion with second deposition step for selective emitter formation by laser doping
Lohmüller, S.; Lohmüller, E.
Zeitschriftenaufsatz
2018Advancements in the Utilization of Screen-Printed Boron Doping Paste for High Efficiency Back-Contact Back-Junction Silicon Solar Cells
Huyeng, J.; Lang, S.F.; Efinger, R.; Schmidt, S.; Spribille, A.; Bruge, D.; Wolf, A.; Keding, R.; Doll, O.; Clement, F.
Konferenzbeitrag
2018Applicability of photonic sintering and autoclaving as alternative contact formation methods for silicon solar cells with passivating contacts
Schube, J.; Fellmeth, T.; Maier, F.; Keding, R.; Clement, F.; Glunz, S.W.
Konferenzbeitrag
2018Bifacial p-type silicon shingle solar cells - the "pSPEER" concept
Baliozian, P.; Lohmüller, E.; Fellmeth, T.; Wöhrle, N.; Krieg, A.; Preu, R.
Zeitschriftenaufsatz
2018Efficiency Gain Analysis of Silicon Passivated Emitter and Rear Solar Cells Solely Based on Measurements
Wasmer, S.; Horst, A. van der; Saint-Cast, P.; Greulich, J.M.
Konferenzbeitrag
2018Front side metallization of silicon solar cells by direct printing of molten metal
Gerdes, B.; Jehle, M.; Lass, N.; Riegger, L.; Spribille, A.; Linse, M.; Clement, F.; Zengerle, R.; Koltay, P.
Zeitschriftenaufsatz
2018High-Efficiency Diamond Wire-Sawn mc-Si-Based PERC Solar Cells Textured by Atmospheric Pressure Dry Etching
Kafle, B.; Ridoy, A.I.; Saint-Cast, P.; Clochard, L.; Duffy, E.; Duncker, K.; Petter, K.; Peters, S.; Hofmann, M.
Konferenzbeitrag
2018Laser-Doped Selective Emitter - Process Development and Speed-Up
Weber, J.; Gutscher, S.; Lohmüller, S.; Lohmüller, E.; Brand, A.A.
Konferenzbeitrag
2018Low-Resistivity Screen-Printed Contacts on Indium Tin Oxide Layers for Silicon Solar Cells with Passivating Contacts
Schube, J.; Tutsch, L.; Fellmeth, T.; Bivour, M.; Feldmann, F.; Hatt, T.; Maier, F.; Keding, R.; Clement, F.; Glunz, S.W.
Zeitschriftenaufsatz
2018Mosaic Module Concept for Cost-Efficient and Aesthetic BIPV Modules
Mittag, M.; Ebert, M.; Wilson, H.R.; Fellmeth, T.
Konferenzbeitrag
2018Printed Dopant Sources for Locally-Doped SiOx/Poly-Si Passivating Contacts
Kiaee, Z.; Reichel, C.; Feldmann, F.; Jahn, M.; Huyeng, J.D.; Keding, R.; Hermle, M.; Clement, F.
Konferenzbeitrag
2018Screen Printed Thick-Film Metallization of Silicon Solar Cells - Recent Developments and Future Perspectives
Lorenz, A.; Linse, M.; Frintrup, H.; Jeitler, M.; Mette, A.; Lehner, M.; Greutmann, R.; Brocker, H.; König, M.; Erath, D.; Clement, F.
Konferenzbeitrag
2018Simulations on Laser-Phosphorous-Doped Selective Emitters
Weber, J.; Lohmüller, S.; Lohmüller, E.; Wasmer, S.; Nekarda, J.; Brand, A.A.
Konferenzbeitrag
2018Solder joint analysis on coated aluminum for silicon solar cell interconnection
De Rose, A.; Kraft, A.; Eitner, U.; Nowottnick, M.
Konferenzbeitrag
2018Towards 90% Bifaciality for p-Type Cz-Si Solar Cells by Adaption of Industrial PERC Processes
Lohmüller, E.; Lohmüller, S.; Norouzi, M.H.; Saint-Cast, P.; Weber, J.; Meier, S.; Wolf, A.
Konferenzbeitrag
2018Trends in Solar Electricity
Bett, A.W.
Vortrag
2017Analysis of the losses of industrial-type PERC solar cells
Saint-Cast, P.; Werner, S.; Greulich, J.; Jäger, U.; Lohmüller, E.; Höffler, H.; Preu, R.
Zeitschriftenaufsatz
2017Bifacial p-type silicon PERL solar cells with screen-printed pure silver metallization and 89% bifaciality
Lohmüller, E.; Werner, S.; Norouzi, M.H.; Mack, S.; Demant, M.; Gutscher, S.; Saint-Cast, P.; Wasmer, S.; Wöhrle, N.; Bitnar, B.; Steckemetz, S.; Palinginis, P.; Neuhaus, H.; König, M.; Wolf, A.
Konferenzbeitrag
2017Challenges for lowly-doped phosphorus emitters in silicon solar cells with screen-printed silver contacts
Werner, S.; Lohmüller, E.; Maier, S.; Mourad, S.; Wolf, A.
Zeitschriftenaufsatz, Konferenzbeitrag
2017The development of shingled cells and modules
Preu, R.
Vortrag
2017Easy plating - a simple approach to suppress parasitically metallized areas in front side Ni/Cu plated crystalline Si solar cells
Kluska, S.; Büchler, A.; Bartsch, J.; Grübel, B.; Brand, A.A.; Gutscher, S.; Cimiotti, G.; Nekarda, J.; Glatthaar, M.
Zeitschriftenaufsatz
2017Experimental verification of internal resistance moldels for PERT-type solar cells
Meier, S.; Unmüßig, S.; Brand, A.; Saint-Cast, P.; Fellmeth, T.; Wolf, A.; Glunz, S.
Zeitschriftenaufsatz, Konferenzbeitrag
2017Fast co-diffusion process for bifacial n-type solar cells
Meier, S.; Maier, S.; Demberger, C.; Wolf, A.; Biro, D.; Glunz, S.W.
Zeitschriftenaufsatz
2017High throughput printing for highly efficient cost-effective Si solar cells
Clement, F.; Lorenz, A.; Pospischil, M.; Biro, D.; Brocker, H.; Bangel, D.; Greutmann, R.; Lehner, M.; Ott, T.; Hage, F.; Oppelt, K.; Honold, T.; Wende, L.; Ringel, M.; Senne, A.; Rohde, J.; Preu, R.
Konferenzbeitrag
2017Impact of material and process variations on the distribution of multicrystalline silicon PERC cell efficiencies
Wasmer, S.; Greulich, J.; Höffler, H.; Wöhrle, N.; Demant, M.; Fertig, F.; Rein, S.
Zeitschriftenaufsatz
2017Increasing the efficiency of multicrystalline silicon PERC solar cells from currently 19% to 20%
Greulich, J.; Lohmüller, E.; Saint-Cast, P.; Werner, S.; Wasmer, S.; Horst, A.J. van der; Preu, R.
Konferenzbeitrag
2017Internal resistance of rear totally diffused solar cells with line shaped contacts
Meier, S.; Saint-Cast, P.; Wöhrle, N.; Fell, A.; Greulich, J.; Wolf, A.; Glunz, S.W.
Zeitschriftenaufsatz
2017Investigation of BC Architectures along TRL at FHG-ISE
Keding, R.; Reichel, C.; Müller, R.; Huyeng, J.; Rendler, L.C.; Spribille, A.; Hermle, M.; Eitner, U.; Clement, F.
Vortrag
2017Key aspects for fabrication of p-type Cz-Si PERC solar cells exceeding 22% conversion efficiency
Werner, S.; Lohmüller, E.; Saint-Cast, P.; Greulich, J.M.; Weber, J.; Schmidt, S.; Moldovan, A.; Brand, A.A.; Dannenberg, T.; Mack, S.; Wasmer, S.; Demant, M.; Linse, M.; Ackermann, R.; Wolf, A.; Preu, R.
Konferenzbeitrag
2017A new pilot research facility for HJT and selective contact solar cells - PV-TEC SELECT
Rentsch, J.; Bivour, M.; Erath, D.; Feldmann, F.; Fischer, A.; Mack, S.; Moldovan, A.; Temmler, J.; Hermle, M.; Glunz, S.W.; Preu, R.
Konferenzbeitrag
2017Palladium/ruthenium composite membrane for hydrogen separation from the off-gas of solar cell production via chemical vapor deposition
Sang Moon, L.; Xu, N.; Kim, S.S.; Li, A.; Grace, J.R.; Lim, C.J.; Boyd, T.; Ryi, S.-K.; Susdorf, A.; Schaadt, A.
Zeitschriftenaufsatz
2017Solder interconnection of aluminum foil rear side metallization for passivated emitter and rear solar cells
De Rose, A.; Kraft, A.; Gledhill, S.; Ali, M.T.; Kroyer, T.; Pscherer, C.; Graf, M.; Nekarda, J.; Eitner, U.
Konferenzbeitrag
201620% efficient n-type Cz-Si MWT solar cells with adjustable reverse behavior
Lohmüller, E.; Werner, S.; Maus, S.; Brand, A.; Jäger, U.; Clement, F.
Zeitschriftenaufsatz
2016Adhesion quality of evaporated aluminum layers on passivation layers for rear metallization of silicon solar cells
Kumm, J.; Hartmann, P.; Eberlein, D.; Wolf, A.
Zeitschriftenaufsatz
2016All-diffused back-contact back-junction solar cell with aluminum-alloyed emitter - experiment and simulation
Wöhrle, N.; Kimmerle, A.; Greulich, J.; Wolf, A.
Zeitschriftenaufsatz
2016biPERC silicon solar cells enabling bifacial applications for industrial solar cells with passivated rear sides
Krauss, K.; Fertig, F.; Greulich, J.; Rein, S.; Preu, R.
Zeitschriftenaufsatz
2016Extending the limits of screen-printed metallization of phosphorus- and boron-doped surfaces
Werner, S.; Lohmüller, E.; Wolf, A.; Clement, F.
Zeitschriftenaufsatz, Konferenzbeitrag
2016Flexo-printed busbarless solar cells for multi-wire interconnection
Lorenz, A.; Gredy, C.; Senne, A.; Beyer, S.; Yao, Y.; Papet, P.; Ufheil, J.; Reinecke, H.
Zeitschriftenaufsatz, Konferenzbeitrag
2016Flexographic printing - towards an advanced front side metallization approach with high throughput and low silver consumption
Lorenz, A.; Gredy, C.; Beyer, S.; Yao, Y.; Papet, P.; Ufheil, J.; Senne, A.; Reinecke, H.; Clement, F.
Zeitschriftenaufsatz
2016Impact of Firing Temperature Profiles on Local BSF Formation in PERC Solar Cells
Mack, S.; Richter, P.; Werner, S.; Clement, F.; Wolf, A.
Konferenzbeitrag
2016On the emitter formation in nanotextured silicon solar cells to achieve improved electrical performances
Kafle, B.; Schön, J.; Fleischmann, C.; Werner, S.; Wolf, A.; Clochard, L.; Duffy, E.; Hofmann, M.; Rentsch, J.
Zeitschriftenaufsatz
2016PC1Dmod 6.2 - improved simulation of c-Si devices with updates on device physics and user interface
Haug, H.; Greulich, J.
Zeitschriftenaufsatz, Konferenzbeitrag
2016Plasma-Free Dry-Chemical Texturing Process for High-Efficiency Multicrystalline Silicon Solar Cells
Kafle, B.; Freund, T.; Mannan, A.; Clochard, L.; Duffy, E.; Werner, S.; Saint-Cast, P.; Hofmann, M.; Rentsch, J.; Preu, R.
Konferenzbeitrag, Zeitschriftenaufsatz
2016Screen-printed metallization concepts for large-area back-contact back-junction silicon solar cells
Hendrichs, M.; Padilla, M.; Walter, J.; Clement, F.; Rech, B.
Zeitschriftenaufsatz
2016Simplified fabrication of n-type Cz-Si HIP-MWT+ solar cells with 20% efficiency using laser structuring
Lohmüller, E.; Werner, S.; Maus, S.; Brand, A.; Jäger, U.; Nekarda, J.; Clement, F.
Zeitschriftenaufsatz, Konferenzbeitrag
2016Towards a 300 WP p-Type HIP-MWT-Module - Simulation, Experimental Results and Costs
Spribille, A.; Savisalo, T.; Kraft, A.; Eberlein, D.; Ebert, M.; Fellmeth, T.; Nold, S.; Pantsar, H.; Clement, F.
Konferenzbeitrag
2016Towards understanding the characteristics of Ag-Al spiking on boron-doped silicon for solar cells
Wöhrle, N.; Lohmüller, E.; Greulich, J.; Werner, S.; Mack, S.
Zeitschriftenaufsatz
2016Understanding process-related efficiency variations of mc-Si PERC cells
Wasmer, S.; Greulich, J.; Höffler, H.; Wöhrle, N.; Rein, S.
Zeitschriftenaufsatz
2015Analysis and performance of dispensed and screen printed front side contacts at cell and module level
Rodriguez, C.; Pospischil, M.; Padilla, A.; Kuchler, M.; Klawitter, M.; Geipel, T.; Padilla, M.; Fellmeth, T.; Brand, A.; Efinger, R.; Linse, M.; Gentischer, H.; König, M.; Hörteis, M.; Wende, L.; Doll, O.; Clement, F.; Biro, D.
Konferenzbeitrag
2015Codiffusion sources and barriers for the assembly of back-contact back-junction solar cells
Bin Tanvir, N.; Keding, R.; Rothhardt, P.; Meier, S.; Wolf, A.; Reinecke, H.; Biro, D.
Zeitschriftenaufsatz
2015Comprehensive comparison of different fine line printing technologies addressing the seed and plate approach with Ni-Cu-plating
Lorenz, A.; Kraft, A.; Gredy, C.; Filipovic, A.; Binder, S.; Krüger, K.; Bartsch, J.; Clement, F.; Biro, D.; Preu, R.; Reinecke, H.
Konferenzbeitrag
2015Development, characterization and modelling of doping profile, contact resistance, and metal spiking in diffused and screen-printed boron emitters
Wöhrle, N.; Lohmüller, E.; Werner, S.; Greulich, J.
Konferenzbeitrag
2015Dispensing Technology on the Route to an Industrial Metallization Process
Pospischil, M.; Kuchler, M.; Klawitter, M.; Rodriguez, C.; Padilla, M.; Efinger, R.; Linse, M.; Padilla, A.; Gentischer, H.; König, M.; Hörteis, M.; Wende, L.; Doll, O.; Zengerle, R.; Clement, F.; Biro, D.
Konferenzbeitrag, Zeitschriftenaufsatz
2015Evaluation of flexographic printing technology for multi-busbar solar cells
Lorenz, A.; Senne, A.; Rohde, J.; Kroh, S.; Wittenberg, M.; Krüger, K.; Clement, F.; Biro, D.
Zeitschriftenaufsatz, Konferenzbeitrag
2015Evaluation of screen-printed metallization concepts for large-area BC-BJ solar cells
Hendrichs, M.; Padilla, M.; Walter, J.; Clement, F.; Fell, A.; Rech, B.
Konferenzbeitrag
2015Honeycomb structure on multicrystalline silicon Al-BSF solar cell with 17.8% efficiency
Volk, A.-K.; Tucher, N.; Seiffe, J.; Hauser, H.; Zimmer, M.; Bläsi, B.; Hofmann, M.; Rentsch, J.
Zeitschriftenaufsatz
2015Impact of texture roughness on the front-side metallization of stencil-printed silicon solar cells
Lorenz, A.; Strauch, T.; Demant, M.; Fellmeth, T.; Barnes Hofmeister, T.; Linse, M.; Dannenberg, T.; Seiffe, J.; Clement, F.; Biro, D.; Reinecke, H.; Preu, R.
Zeitschriftenaufsatz
2015Inkjet technology for crystalline silicon photovoltaics
Stüwe, D.; Mager, D.; Biro, D.; Korvink, J.G.
Zeitschriftenaufsatz
2015Light-induced degradation of silicon solar cells with aluminium oxide passivated rear side
Krauss, K.; Fertig, F.; Menzel, D.; Rein, S.
Zeitschriftenaufsatz, Konferenzbeitrag
2015Long-term and annealing stable, solderable PVD metallization with optimized Al diffusion barrier
Kumm, J.; Chacko, R.V.; Samadi, H.; Hartmann, P.; Eberlein, D.; Jäger, U.; Wolf, A.
Zeitschriftenaufsatz, Konferenzbeitrag
2015Manufacturing 100-µm-thick silicon solar cells with efficiencies greater than 20% in a pilot production line
Terheiden, B.; Ballmann, T.; Horbelt, R.; Schiele, Y.; Seren, S.; Ebser, J.; Hahn, G.; Mertens, V.; Koentopp, M.B.; Scherff, M.; Müller, J.W.; Holman, Z.C.; Descoeudres, A.; Wolf, S. de; Nicolas, S.M. de; Geissbuehler, J.; Ballif, C.; Weber, B.; Saint-Cast, P.; Rauer, M.; Schmiga, C.; Glunz, S.W.; Morrison, D.J.; Devenport, S.; Antonelli, D.; Busto, C.; Grasso, F.; Ferrazza, F.; Tonelli, E.; Oswald, W.
Zeitschriftenaufsatz
2015Optical simulation and analysis of iso-textured silicon solar cells and modules including light trapping
Greulich, J.; Volk, A.-K.; Wöhrle, N.; Hädrich, I.; Wiese, M.; Hermle, M.; Rein, S.
Zeitschriftenaufsatz, Konferenzbeitrag
2015Optimization of BBr3 diffusion processes for n-type silicon solar cells
Werner, S.; Lohmüller, E.; Belledin, U.; Vlooswijk, A.H.G.; Naber, R.C.G.; Mack, S.; Wolf, A.
Konferenzbeitrag
2015Origin of corrosion effects in solar cell contacts during electrochemical nickel deposition
Kraft, A.; Pernia, Y.; Kalio, A.; Gautrein, A.; Ni, L.M.; Bartsch, J.; Glunz, S.; Reinecke, H.
Zeitschriftenaufsatz
2015PC1Dmod 6.1 - state-of-the-art models in a well-known interface for improved simulation of Si solar cells
Haug, H.; Greulich, J.; Kimmerle, A.; Stensrud Marstein, E.
Zeitschriftenaufsatz, Konferenzbeitrag
2015Progress on industrial solar cell front side metallization by parallel dispensing technology
Pospischil, M.; Kuchler, M.; Klawitter, M.; Efinger, R.; Rodriguez, C.; Padilla, A.; Gentischer, H.; König, M.; Hörteis, M.; Wende, L.; Mette, A.; Clement, F.; Preu, R.; Biro, D.
Konferenzbeitrag
2015Pseudo FF and Voc analysis of Cz-Si based low concentrator solar cells
Fellmeth, T.; Clement, F.; Biro, D.
Zeitschriftenaufsatz, Konferenzbeitrag
2015Short-circuit current density imaging methods for silicon solar cells
Fertig, F.; Padilla, M.; Breitenstein, O.; Höffler, H.; Geisemeyer, I.; Schubert, M.C.; Rein, S.
Zeitschriftenaufsatz, Konferenzbeitrag
2015Status and perspective of emitter formation by POCl3-diffusion
Wolf, A.; Kimmerle, A.; Werner, S.; Maier, S.; Belledin, U.; Meier, S.; Biro, D.
Konferenzbeitrag
2014Advanced metallization concepts for p-type silicon Metal-Wrap-Through (MWT) solar cells
Hendrichs, M.; Thaidigsmann, B.; Lohmüller, E.; Nold, S.; Clement, F.; Biro, D.; Rech, B.; Preu, R.
Zeitschriftenaufsatz
2014Analysing the lateral series resistance of high-performance metal wrap through solar cells
Greulich, J.; Thaidigsmann, B.; Rein, S.
Zeitschriftenaufsatz
2014An analytical model for interdigitated back contact solar cells
Saint-Cast, P.; Padilla, M.; Kimmerle, A.; Reichel, C.
Zeitschriftenaufsatz
2014Analytical modeling of industrial-related silicon solar cells
Fellmeth, T.; Clement, F.; Biro, D.
Zeitschriftenaufsatz
2014The BOSCO solar cell - a both sides collecting and contacted structure
Fertig, F.; Krauß, K.; Greulich, J.; Clement, F.; Biro, D.; Preu, R.; Rein, S.
Zeitschriftenaufsatz
2014The BOSCO Solar Cell: Double-sided Collection and Bifacial Operation
Fertig, F.; Krauß, K.; Greulich, J.; Clement, F.; Biro, D.; Preu, R.; Rein, S.
Zeitschriftenaufsatz, Konferenzbeitrag
2014The BOSCO solar cell: Simulation and experiment
Fertig, F.; Greulich, J.; Krauss, K.; Clement, F.; Biro, D.; Preu, R.; Rein, S.
Zeitschriftenaufsatz
2014Developing a high throughput metallization approach for silicon solar cells based on flexographic printing
Lorenz, A.; Kalio, A.; Barnes Hofmeister, T.; Kroh, S.; Kraft, A.; Bartsch, J.; Clement, F.; Biro, D.
Konferenzbeitrag
2014Developing a high throughput printing technology for silicon solar cell front side metallisation using flexography
Lorenz, A.; Kalio, A.; Hofmeister, T.B.; Kraft, A.; Bartsch, J.; Clement, F.; Reinecke, H.; Biro, D.
Zeitschriftenaufsatz
2014Heavily doped Si:P emitters of crystalline Si solar cells: Recombination due to phosphorus precipitation
Min, B.; Wagner, H.; Dastgheib-Shirazi, A.; Kimmerle, A.; Kurz, H.; Altermatt, P.P.
Zeitschriftenaufsatz
2014The HIP-MWT+ solar cell concept on N-type silicon and metallization-induced voltage losses
Lohmüller, E.; Werner, S.; Thaidigsmann, B.; Wöhrle, N.; Mack, S.; Clement, F.; Biro, D.
Konferenzbeitrag
2014Inkjet-printing for maskless separation of metal structures for back-contact silicon solar cells
Stüwe, D.; Hartmann, P.; Keding, R.; Thaidigsmann, B.; Clement, F.; Prokopiak, S.; Fastnacht, P.; Jesswein, R.; Geppert, T.; Woehl, R.; Korvink, J.G.; Biro, D.
Zeitschriftenaufsatz
2014Local boron doping for P-type PERL silicon solar cells fabricated by laser processing of doped silicon nanoparticle paste
Jäger, U.; Wolf, A.; Wufka, C.; Tomizawa, Y.; Imamura, T.; Soeda, M.; Ikeda, Y.; Shiro, T.
Konferenzbeitrag
2014Localization and characterization of annealing-induced shunts in Ni-plated monocrystalline silicon solar cells
Büchler, A.; Kluska, S.; Kasemann, M.; Breitwieser, M.; Kwapil, W.; Hähnel, A.; Blumtritt, H.; Hopman, S.; Glatthaar, M.
Zeitschriftenaufsatz
2014Micro characterization and imaging of spikes in nickel plated solar cells
Büchler, A.; Kluska, S.; Brand, A.; Geisler, C.; Hopman, S.; Glatthaar, M.
Zeitschriftenaufsatz, Konferenzbeitrag
2014Next generation printing technologies for fine-line metallization of Si solar cells
Clement, F.; Pospischil, M.; Lorenz, A.; Linse, M.; Erath, D.; Kuchler M.; Klawitter, M.; Spribille, A.; Hoenig, R.; Efinger, R.; Fellmeth, T.; Biro, D.
Vortrag
2014Online process control of alkaline texturing baths: Determination of the chemical concentrations
Zimmer, M.; Krieg, K.; Rentsch, J.
Zeitschriftenaufsatz
2014Plating processes on aluminium and application to novel solar cell concepts
Kamp, M.; Bartsch, J.; Keding, R.; Jahn, M.; Müller, R.; Glatthaar, M.; Glunz, S.W.; Krossing, I.
Zeitschriftenaufsatz, Konferenzbeitrag
2014POCL3-based co-diffusion process for N-type back-contact back-junction solar cells
Keding, R.; Hendrichs, M.; Stüwe, D.; Jahn, M.; Reichel, C.; Borchert, D.; Wolf, A.; Reinecke, H.; Biro, D.
Konferenzbeitrag
2014Process optimization for the front side of P-type silicon solar cells
Werner, S.; Lohmüller, E.; Maier, S.; Kimmerle, A.; Spribille, A.; Wasmer, S.; Clement, F.; Wolf, A.
Konferenzbeitrag
2014Recombination characteristics of p+ regions alloyed from screen-printed aluminum pastes containing boron additives
Rauer, M.; Steinkemper, H.; Schmiga, C.; Glatthaar, M.; Glunz, S.W.
Konferenzbeitrag
2014Reverse bias behavior of diffused and screen-printed n-type Cz-Si solar cells
Lohmüller, E.; Fertig, F.; Werner, S.; Geisemeyer, I.; Clement, F.; Biro, D.
Zeitschriftenaufsatz
2013Co-diffused back-contact back-junction silicon solar cells
Keding, R.; Stüwe, D.; Kamp, M.; Reichel, C.; Wolf, A.; Woehl, R.; Borchert, D.; Reinecke, H.; Biro, D.
Konferenzbeitrag
2013Co-diffused back-contact back-junction silicon solar cells without gap regions
Keding, R.; Stüwe, D.; Kamp, M.; Reichel, C.; Wolf, A.; Woehl, R.; Borchert, D.; Reinecke, H.; Biro, D.
Zeitschriftenaufsatz
2013Co-diffusion from APCVD BSG and POCl3 for industrial n-type solar cells
Rothhardt, P.; Demberger, C.; Wolf, A.; Biro, D.
Zeitschriftenaufsatz, Konferenzbeitrag
2013Comparison of cleaning processes for enabling solderability of LFC-PERC silicon solar cells with evaporated Al as rear side metallization
Samadi, H.; Kumm, J.; Eberlein, D.; Hartmann, P.; Wolf, A.; Mack, S.
Konferenzbeitrag
2013Cost-optimized metallization layout for metal wrap through (MWT) solar cells and modules
Hendrichs, M.; Thaidigsmann, B.; Fellmeth, T.; Nold, S.; Spribille, A.; Herrmann, P.; Mittag, M.; Hädrich, I.; Eitner, U.; Clement, F.; Biro, D.; Preu, R.
Konferenzbeitrag
2013Depletion of boron-doped surfaces protected with barrier layers during POCL3-diffusion
Lohmüller, E.; Werner, S.; Schön, J.; Thanas, M.; Mack, S.; Wolke, W.; Wolf, A.; Clement, F.; Biro, D.
Konferenzbeitrag
2013Development of a high-throughput fine line metallization process using CFD-simulation
Pospischil, M.; Klawitter, M.; Kuchler, M.; Specht, J.; Gentischer, H.; Efinger, R.; König, M.; Hörteis, M.; Mohr, C.; Wende, L.; Lossen, J.; Weiss, M.; Doll, O.; Köhler, I.; Zengerle, R.; Clement, F.; Biro, D.
Konferenzbeitrag
2013Development of temperature-stable, solderable PVD rear metallization for industrial silicon solar cells
Kumm, J.; Samadi, H.; Hartmann, P.; Nold, S.; Wolf, A.; Wolke, W.
Konferenzbeitrag
2013Effects of high-temperature treatment on the hydrogen distribution in silicon oxynitride/silicon nitride stacks for crystalline silicon surface passivation
Schwab, C.; Hofmann, M.; Heller, R.; Seiffe, J.; Rentsch, J.; Preu, R.
Zeitschriftenaufsatz
2013Etching of PVD metal layers for contact separation of back contact silicon solar cells using inkjet-printing
Stüwe, D.; Hartmann, P.; Keding, R.; Clement, F.; Woehl, R.; Biro, D.; Fastnacht, P.; Jesswein, R.; Geppert, T.; Prokopiak, S.; Korvink, J.G.
Konferenzbeitrag
2013Evaluation of cast mono silicon material for thermal oxide passivated solar cells
Schwab, C.; Haunschild, J.; Graf, M.; Wufka, C.; Wolf, A.; Biro, D.; Preu, R.
Zeitschriftenaufsatz, Konferenzbeitrag
2013Evaluation of industrially relevant parameters for contact firing of screen printed front side silver contacts
Hönig, R.; Vössing, D.; Clement, F.; Biro, D.; Preu, R.; Wilde, J.
Zeitschriftenaufsatz, Konferenzbeitrag
2013Fire-through contacts - a new approach to contact the rear side of passivated silicon solar cells
Thaidigsmann, Benjamin; Kick, Christopher; Drews, Andreas; Clement, Florian; Wolf, Andreas; Biro, Daniel
Zeitschriftenaufsatz
2013Flexographic printing - high throughput technology for fine line seed layer printing on silicon solar cells
Lorenz, A.; Kalio, A.; Hofmeister, G.; Nold, S.; Kraft, A.; Bartsch, J.; Wolf, D.; Dreher, M.; Clement, F.; Biro, D.
Konferenzbeitrag
2013High-power-plasma PECVD of SiNx and Al2O3 for industrial solar cell manufacturing
Hofmann, M.; Kohn, N.; Schwarz, F.; Nölker, S.; Kastl, S.; Beckmann, R.; Ferré, R.; Pernau, T.; Trogus, D.; Kühnhold, S.; Saint-Cast, P.; Rentsch, J.
Konferenzbeitrag
2013HIP-MWT: Our approach for high performance ribbon based back contact MWT modules with Low CTM losses
Spribille, A.; Hendrichs, M.-S.; Thaidigsmann, B.; Clement, F.; Hädrich, I.; Wiese, M.; Kaufmann, S.; Morf, P.; Gretler, A.; Rueedy, A.; Nussbaumer, H.; Träger, A.
Konferenzbeitrag
2013Industrial screen-printed solar cells with novel atmospheric pressure dry texturing process
Kafle, B.; Trogus, D.; Dresler, B.; Mäder, G.; Clochard, L.; Duffy, E.; Hofmann, M.; Rentsch, J.
Konferenzbeitrag
2013Investigation of methods for adhesion characterization of evaporated aluminum layers
Kumm, J.; Eberlein, D.; Hartmann, P.; Wolke, W.; Wolf, A.; Preu, R.
Konferenzbeitrag
2013Laser assisted honeycomb-texturing on multicrystalline silicon for industrial applications
Volk, A.-K.; Gutscher, S.; Brand, A.; Wolke, W.; Zimmer, M.; Reinecke, H.
Konferenzbeitrag
2013Laser doping from borosilicate glass for metallization of boron emitters
Fernandez-Robledo, S.; Jäger, U.; Lohmüller, E.; Nekarda, J.; Preu, R.
Konferenzbeitrag
2013Laser-based foil metallization for industrial PERC solar cells
Nekarda, J.; Graf, M.; Rodofili, A.; Preu, R.; Böhme, R.; Sontag, D.
Konferenzbeitrag
2013Multifunctional PECVD layers: Dopant source, passivation, and optics
Seiffe, J.; Pillath, F.; Trogus, D.; Brand, A.; Savio, C.; Hofmann, M.; Rentsch, J.; Preu, R.
Zeitschriftenaufsatz
2013The nature of screen printed front side silver contacts - results of the Project MikroSol
Hönig, R.; Dürrschnabel, M.; Mierlo, W. van; Aabdin, Z.; Bernhard, J.; Biskupek, J.; Eibl, O.; Kaiser, U.; Wilde, J.; Clement, F.; Biro, D.
Zeitschriftenaufsatz, Konferenzbeitrag
2013A novel approach for single side wet chemical polishing of crystalline silicon solar cells
Richter, M.; Kästner, G.; Zimmer, M.; Fischer, A.; Corda, M.; Hain, A.
Konferenzbeitrag
2013P-Type MWT solar cells: Current status and future expectations
Thaidigsmann, B.; Hendrichs, M.; Nold, S.; Lohmüller, E.; Wolf, A.; Clement, F.; Biro, D.; Preu, R.
Konferenzbeitrag
2013Passivation of solar cell emitters using aluminum nitride
Krugel, G.; Sharma, A.; Moldovan, A.; Wolke, W.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2013PECVD Al2O3/a-Si:B as a dopant source and surface passivation
Seiffe, J.; Gahoi, A.; Hofmann, M.; Rentsch, J.; Preu, R.
Zeitschriftenaufsatz
2013Potential-induced degradation on cell level: The inversion model
Saint-Cast, P.; Nagel, H.; Wagenmann, D.; Schön, J.; Schmitt, P.; Reichel, C.; Glunz, S.W.; Hofmann, M.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2013Process development for a high-throughput fine line metallization approach based on dispensing technology
Pospischil, M.; Klawitter, M.; Kuchler, M.; Specht, J.; Gentischer, H.; Efinger, R.; Kroner, C.; Luegmair, M.; König, M.; Hörteis, M.; Mohr, C.; Wende, L.; Lossen, J.; Weiß, M.; Doll, O.; Koehler, I.; Zengerle, R.; Clement, F.; Biro, D.
Zeitschriftenaufsatz, Konferenzbeitrag
2013Recombination and microstructural properties of soldering pads and their impact on solar cell performance
Krauß, K.; Fertig, F.; Rein, S.
Zeitschriftenaufsatz, Konferenzbeitrag
2013Simplified front surface field formation for back contacted silicon solar cells
Kimmerle, A.; Woehl, R.; Wolf, A.; Biro, D.
Zeitschriftenaufsatz, Konferenzbeitrag
2013Study of hydrogenated AlN as an anti-reflective coating and for the effective surface passivation of silicon
Krugel, G.; Sharma, A.; Wolke, W.; Rentsch, J.; Preu, R.
Zeitschriftenaufsatz
2013Study of the electrical insulation of dielectric passivation layers and stacks for back-contact back-junction silicon solar cells
Keding, R.; Bock, R.; Katkhouda, K.; Stüwe, D.; Reichel, C.; Clement, F.; Woehl, R.; Reinecke, H.; Geppert, T.
Konferenzbeitrag
2013Technologies for mass production of > 20% efficient P-Type silicon solar cells
Mack, S.; Wolf, A.; Thaidigsmann, B.; Lohmüller, E.; Jäger, U.; Pospischil, M.; Clement, F.; Eberlein, D.; Preu, R.; Biro, D.
Konferenzbeitrag
2013Transfer of the HIP-MWT solar cell concept to n-type silicon
Lohmüller, E.; Thaidigsmann, B.; Clement, F.; Wolf, A.; Biro, D.
Zeitschriftenaufsatz, Konferenzbeitrag
2013Two-step plasma texturing process for industrial solar cell manufacturing
Seiffe, J.; Bremen, B.; Rappl, S.; Hofmann, M.; Rentsch, J.
Konferenzbeitrag
2013Wet chemical single-side emitter etch back for MWT solar cells with AL-BSF and challenges for via paste selection
Spribille, A.; Lohmüller, E.; Thaidigsmann, B.; Hamid, R.; Nussbaumer, H.; Clement, F.; Preu, R.
Konferenzbeitrag
2011Properties of purified direct steam grown silicon thermal oxides
Mack, S.; Wolf, A.; Walczak, A.; Thaidigsmann, B.; Wotke, E.A.; Spiegelman, J.J.; Preu, R.; Biro, D.
Zeitschriftenaufsatz
2011Surface passivation of crystalline silicon by plasma-enhanced chemical vapor deposition double layers of silicon-rich silicon oxynitride and silicon nitride
Seiffe, J.; Gautero, L.; Hofmann, M.; Rentsch, J.; Preu, R.; Weber, S.; Eichel, R.A.
Zeitschriftenaufsatz
201019.5% efficient screen printed crystalline silicon metal wrap through (MWT) solar cells for concentrator (2-25x) applications
Fellmeth, T.; Fritz, S.; Menkoe, M.; Clement, F.; Biro, D.; Preu, R.
Konferenzbeitrag
201021.1% efficient PERC silicon solar cells on large scale by using inline sputtering for metallization
Reinwand, D.; Specht, J.; Stüwe, D.; Seitz, S.; Nekarda, J.-F.; Biro, D.; Preu, R.; Trassl, R.
Konferenzbeitrag
2010Analysis of local Al-P+-layers for solar cells processed by small screen-printed structures
Krause, J.; Woehl, R.; Biro, D.
Konferenzbeitrag
2010Analysis of luminescence images applying pattern recognition techniques
Demant, M.; Glatthaar, M.; Haunschild, J.; Rein, S.
Konferenzbeitrag
2010Changes in contact resistance of different metals to magnetron sputtered ITO while annealing
Ziegler, J.; Xia, L.; Zejnelovic, R.; Borchert, D.
Konferenzbeitrag
2010Characterisation of local Al-BSF formation for PERC solar cell structures
Grasso, F.S.; Gautero, L.; Rentsch, J.; Preu, R.; Lanzafame, R.
Konferenzbeitrag
2010Characterization and optimization of laser edge isolation
Gutscher, S.; Knorz, A.; Gundel, P.; Greulich, J.; Preu, R.
Konferenzbeitrag
2010Characterization of aluminium screen-printed local contacts
Grasso, F.S.; Gautero, L.; Rentsch, J.; Preu, R.; Lanzafame, R.
Konferenzbeitrag
2010Combining the advantages of wrap through metallization and rear surface passivation into industrial MWT-PERC devices
Thaidigsmann, B.; Wolf, A.; Clement, F.; Biro, D.; Preu, R.
Konferenzbeitrag
2010Comparison of different rear contacting approaches for industrial PERC solar cells on MC-SI wafer
Gautero, L.; Kania, D.; Seiffe, J.; Knorz, A.; Specht, J.; Nekarda, J.; Hofmann, M.; Rentsch, J.; Sallese, J.-M.; Preu, R.
Konferenzbeitrag
2010Comparison of three different metallization concepts for LFC cells
Nekarda, J.-F.; Hörteis, M.; Lottspeich, F.; Wolf, A.; Preu, R.
Konferenzbeitrag
2010Cz Silicon Wafers and Solar Cells from Compensated Solar-Grade Silicon-Feedstock: Potential and Challenges
Rein, S.; Geilker, J.; Kwapil, W.; Emanuel, G.; Reis, I.; Soiland, A.-K.; Grandum, S.; Tronstad, R.
Konferenzbeitrag
2010Development and modelling of crystalline silicon based metal wrap through (MWT) solar cells
Fellmeth, T.; Meyer, K.; Greulich, J.; Clement, F.; Biro, D.; Preu, R.; Menkoe, M.; Lahmer, D.; Krokoszinski, H.-J.
Konferenzbeitrag
2010Dispensing of etching paste and inkjetting of diffusion barrier for MWT solar cell processing
Spribille, A.; Clement, F.; Erath, D.; Specht, J.; Biro, D.; Preu, R.; Köhler, I.; Doll, O.; Stockum, W.; Tueshaus, C.
Konferenzbeitrag
2010Doping- and carrier concentration profile characterisation of highly phosphorus-doped emitters
Werner, S.; Belledin, U.; Kimmerle, A.; Fallisch, A.; Wolf, A.; Biro, D.
Konferenzbeitrag
2010Dry plasma processing for industrial crystalline silicon solar cell production
Hofmann, M.; Rentsch, J.; Preu, R.
Zeitschriftenaufsatz
2010Firing stable passivation layers for the front and rear side of high efficiency N-type back-contact back-junction solar cells
Woehl, R.; Mack, S.; Kohn, N.; Preu, R.; Biro, D.
Konferenzbeitrag
2010Front surface passivation for industrial-type solar cells by silicon oxynitride - silicon nitride stacks
Schwab, C.; Hofmann, M.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2010High speed laser drilling: Parameter evaluation and characterisation
Knorz, A.; Gutscher, S.; Fell, A.; Gundel, P.; Preu, R.
Konferenzbeitrag
2010High temperature stability of PECVD aluminium oxide layers applied as negatively charged passivation on c-Si surfaces
Kania, D.; Saint-Cast, P.; Hofmann, M.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2010Highly efficient industrially feasible metal wrap through (MWT) silicon solar cells
Fellmeth, T.; Menkoe, M.; Clement, F.; Biro, D.; Preu, R.
Zeitschriftenaufsatz
2010Improved emitters by dry etching
Seiffe, J.; Khandelwal, R.; Clement, C.; Jäger, U.; Hofmann, M.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2010Industrial deposition of PECVD AIOx for rear passivation of PERC-type mc-SI solar cells
Rentsch, J.; Sperlich, H.-P.; Kohn, N.; Kania, D.; Saint-Cast, P.; Schetter, C.; Hofmann, M.; Preu, R.
Konferenzbeitrag
2010Investigation of the minority carrier lifetime reduction during industrial DC-sputtering of metal seed layers
Reinwand, D.; Graf, M.; Hartmann, P.; Preu, R.; Trassl, R.
Konferenzbeitrag
2010Ladezustandsbestimmung bei Lithium-Ionen-Batterien
Jung, M.; Schwunk, S.
Konferenzbeitrag
2010Paste development for screen printed mc-Si MWT solar cells exceeding 17% efficiency
Hoenig, R.; Clement, F.; Menkoe, M.; Retzlaff, M.; Biro, D.; Preu, R.; Neidert, M.; Henning, A.; Mohr, C.; Zhang, W.
Konferenzbeitrag
2010Pilot line processing of 18.6% efficient rear surface passivated large area solar cells
Wolf, A.; Wotke, E.A.; Walczak, A.; Mack, S.; Bitnar, B.; Koch, C.; Preu, R.; Biro, D.
Konferenzbeitrag
2010Pilot processing of 18.6% efficient rear surface passivated silicon solar cells with screen printed front contacts
Wolf, A.; Wotke, E.A.; Mack, S.; Nekarda, J.-F.; Biro, D.; Preu, R.; Schlegel, K.; Weber, T.; Lossen, J.; Böscke, T.; Grohe, A.; Engelhart, P.; Müller, J.W.; Schubert, G.; Plagwitz, H.; Gassenbauer, Y.
Konferenzbeitrag
2010Pilot-line processing of highly-efficient MWT silicon solar cells
Clement, F.; Thaidigsmann, B.; Hoenig, R.; Fellmeth, T.; Spribille, A.; Lohmüller, E.; Krieg, A.; Glatthaar, M.; Wirth, H.; Biro, D.; Preu, R.; Menkoe, M.; Meyer, K.; Lahmer, D.; Krokoszinski, H.-J.; Neidert, M.; Henning, A.; Mohr, C.; Zhang, W.
Konferenzbeitrag
2010Plasma single-sided etching for rear emitter etch-back and flattening of industrial crystalline silicon solar cells
Khandelwal, R.; Hofmann, M.; Trogus, D.; Gautero, L.; Seiffe, J.; Rentsch, J.; Preu, R.
Konferenzbeitrag
2010Printing techniques in the c-Si PV industry - a brief technological overview
Erath, D.
Zeitschriftenaufsatz
2010Purified steam for industrial thermal oxidation processes
Mack, S.; Biro, D.; Wolf, A.; Thaidigsmann, B.; Walczak, A.; Spiegelman, J.J.; Preu, R.
Konferenzbeitrag
2010Quality control of as-cut multicrystalline silicon wafers using photoluminescence imaging for solar cell production
Haunschild, J.; Glatthaar, M.; Demant, M.; Nievendick, J.; Motzko, M.; Rein, S.; Weber, E.R.
Zeitschriftenaufsatz
2010Silicon solar cells using aluminum foil as rear side metallization reaching 21.0 % efficiency
Nekarda, J.-F.; Lottspeich, F.; Wolf, A.; Preu, R.
Konferenzbeitrag
2010A simple laser based process for the formation of a LBSF for n-type silicon solar cells
Jäger, U.; Suwito, D.; Benick, J.; Janz, S.; Hermle, M.; Glunz, S.W.; Preu, R.
Konferenzbeitrag
2010Simultaneous front emitter and rear surface passivation by thermal oxidation - an industrially feasible approach to a 19% efficient PERC device
Mack, S.; Jäger, U.; Wolf, A.; Nold, S.; Preu, R.; Biro, D.
Konferenzbeitrag
2010SiNTO EWT silicon solar cells
Fallisch, A.; Keding, R.; Kästner, G.; Bartsch, J.; Werner, S.; Stüwe, D.; Specht, J.; Preu, R.; Biro, D.
Konferenzbeitrag
2010Towards 19% efficient industrial PERC devices using simultaneous front emitter and rear surface passivation by thermal oxidation
Mack, S.; Jäger, U.; Kästner, G.; Wotke, E.A.; Belledin, U.; Wolf, A.; Preu, R.; Biro, D.
Konferenzbeitrag
2010Wafer identification using laser marked data matrix codes
Krieg, A.; Schmitt, C.; Rein, C.; Nübling, S.; Schneider, P.
Konferenzbeitrag