| | |
---|
2017 | Study of WC- and Cr3C2-containing hardmetal compositions for thermal spray coatings Berger, Lutz-Michael; Sassatelli, Paolo; Pötschke, Johannes; Puddu, Pietro | Konferenzbeitrag |
2012 | Neue Möglichkeiten der Gefügedarstellung von SiC-Werkstoffen Sempf, K.; Herrmann, M.; Sydow, U. | Zeitschriftenaufsatz |
2010 | Cosintering of powder injection molding parts made from ultrafine WC-Co and 316L stainless steel powders for fabrication of novel composite structures Simchi, A.; Petzoldt, F. | Zeitschriftenaufsatz |
2010 | Microstructure and De-/hydrogenation behavior of melt-spun Mg-Ni-Y alloys as hydrogen storage materials Röntzsch, L.; Kalinichenka, S.; Kieback, B. | Konferenzbeitrag |
2009 | Enhanced wear resistance of precipitation hardening steels by laser solution annealing and subsequent aging treatment Kaspar, Joerg; Brenner, Berndt; Luft, A.; Tietz, F.; Bretschneider, Jörg | Konferenzbeitrag |
2009 | Field-assisted densification of superhard B6O materials with Y2O3/Al2O3 addition Herrmann, M.; Kleebe, H.J.; Raethel, J.; Sempf, K.; Lauterbach, S.; Müller, M.M.; Sigalas, I. | Zeitschriftenaufsatz |
2009 | Laser nitriding Kaspar, Joerg; Bretschneider, Jörg; Bonß, Steffen; Winderlich, Bernd; Brenner, Berndt | Konferenzbeitrag |
2009 | Microstructure and compression strength of novel TRIP-steel/Mg-PSZ composites Biermann, H.; Martin, U.; Aneziris, C.G.; Kolbe, A.; Müller, A.; Schärfl, W.; Herrmann, M. | Zeitschriftenaufsatz |
2009 | Thermally sprayed titanium oxide coatings - A truly multifunctional coating solution Berger, L.-M.; Toma, F.-L.; Stahr, C.C. | Konferenzbeitrag |
2009 | Tune the properties of a partially reactive system with SPS technology Hutsch, T.; Weißgärber, T.; Schmidt, J.; Kieback, B. | Konferenzbeitrag |
2008 | B6O: A correlation between mechanical properties and microstructure evolution upon Al2O3 addition during hot pressing Kleebe, H.J.; Lauterbach, S.; Shabalala, T.C.; Herrmann, M.; Sigalas, I. | Zeitschriftenaufsatz |
2008 | Characterisation of ceramic nanostructured coatings prepared by thermal spraying of suspensions Toma, F.-L.; Berger, L.-M.; Naumann, T.; Langner, S. | Konferenzbeitrag |
2008 | High temperature tribology up to 7.5 m/s of thermally sprayed coatings of the TiO2-Cr2O3 system and (Ti,Mo)(C,N)-Ni(Co) Berger, L.-M.; Stahr, C.C.; Saaro, S.; Thiele, S.; Woydt, M.; Kelling, N. | Konferenzbeitrag |
2008 | Induction assisted laser beam welding of HSLA steel sheets Jahn, A.; Krätzsch, M.; Brenner, B. | Konferenzbeitrag |
2008 | Microinjection moulding of 316L/17-4PH and 316L/Fe powders for fabrication of magnetic-nonmagnetic bimetals Imgrund, P.; Rota, A.; Simchi, A. | Zeitschriftenaufsatz |
2008 | Texture inhomogeneity in titanium deformed by ECAP Skrotzki, W.; Kloden, B.; Lankau, A.; Chulist, R.; Kopylow, V.; Brokmeier, H.G. | Zeitschriftenaufsatz, Konferenzbeitrag |
2007 | Electrochemical corrosion of solid and liquid phase sintered silicon carbide in acidic and alkaline environments Andrews, A.; Herrmann, M.; Sephton, M.; Machio, C.; Michaelis, A. | Zeitschriftenaufsatz |
2007 | Manufacturing of ceramic-metal composites by combining tape casting and injection molding Baumann, A.; Lenk, R.; Moritz, T. | Konferenzbeitrag |
2007 | Microstructure, phase and thermoelastic properties of laminated liquid-phase-sintered silicon carbide-titanium carbide ceramic composites Liversage, J.H.; McLachlan, D.S.; Sigalas, I.; Herrmann, M. | Zeitschriftenaufsatz |
2007 | Net-shape processing of NiTi alloys by micro metal injection moulding (micro-MIM) Imgrund, P.; Rota, A.; Schmidt, H.; Capretti, G. | Konferenzbeitrag |
2007 | Thermal spraying for the development of photocatalytic active TiO2 surfaces Toma, F.-L.; Bertrand, G.; Klein, D.; Meunier, C. | Konferenzbeitrag |
2006 | Corrosion of Si3N4-ceramics in aqueous solutions Part I: Characterisation of starting materials and corrosion in 1 NH2SO4 Schilm, J.; Gruner, W.; Herrmann, M.; Michael, G. | Zeitschriftenaufsatz |
2006 | Densification of liquid phase sintered silicon carbide Can, A.; Herrmann, M.; McLachlan, D.S.; Sigalas, I.; Adler, J. | Zeitschriftenaufsatz |
2006 | Effects of the homogeneity of particle coordination on solid-state sintering of transparent alumina Krell, A.; Klimke, J. | Zeitschriftenaufsatz |
2006 | The influence of porosity on the electrical properties of liquid-phase sintered silicon carbide Ihle, J.; Martin, H.-P.; Herrmann, M.; Obenaus, P.; Adler, J.; Hermel, W.; Michaelis, A. | Zeitschriftenaufsatz |
2005 | Laser nitriding: A promising way to improve the cavitation erosion resistance of Ti-6Al-4V Kaspar, J.; Luft, A.; Bretschneider, J.; Jacob, S.; Bonß, S.; Winderlich, B.; Brenner, B.; Beyer, E. | Konferenzbeitrag |
2003 | Corrosion of silicon nitride materials in acidic and basic solutions and under hydrothermal conditions Herrmann, M.; Schilm, J.; Michael, G.; Meinhardt, J.; Flegler, R. | Zeitschriftenaufsatz |
2003 | Long-term stability of nonoxide ceramics in an oxidative environment at 1500 deg C Klemm, H.; Taut, C.; Wötting, G. | Zeitschriftenaufsatz |
2003 | Processing of high-density submicrometer Al2O3 for new applications Krell, A.; Blank, P.; Ma, H.; Hutzler, T.; Nebelung, M. | Zeitschriftenaufsatz |
1997 | Structural development and properties of Si3N4-SiC composites from amorphous Si-C-N powder precursors Tschernikova, E.; Neumann, A.; Boden, G. | Konferenzbeitrag |
1995 | Effect of compaction pressure on the microstructure of mechanically alloyed Ag37Cu63 alloy Li, Z.Q.; Shen, H.; Li, Y.; Günther, B. | Zeitschriftenaufsatz |
1995 | Influence of powder consolidation methods on the structural and thermal properties of a nanophase Cu-50wt%Ag alloy Shen, H.; Li, Z.; Günther, B.; Korznikov, A.V.; Valiev, R.Z. | Zeitschriftenaufsatz |
1993 | Pore formation during reactive sintering of extruded titanium - aluminium powder mixtures Dahms, M.; Leitner, G.; Poeßnecker, W.; Schultrich, S.; Schmelzer, F. | Zeitschriftenaufsatz |
1993 | Preparation and thermal stability of nanocrystalline Cu alloys Günther, B.; Veltl, G.; Kunze, H.-D. | Zeitschriftenaufsatz |
1993 | Thermal stability of ultrafine grained and nanocrystalline metals Kumpmann, A.; Günther, B.; Kunze, H.-D. | Konferenzbeitrag |
1993 | Thermal stability of ultrafine grained metals and alloys Kumpmann, A.; Günther, B.; Kunze, H.-D. | Zeitschriftenaufsatz |
1992 | Secondary recrystallization effects in nanostructured elemental metals Günther, B.; Kumpmann, A.; Kunze, H.-D. | Zeitschriftenaufsatz |