Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Influence of Glassy Carbon Surface Finishing on its Wear Behavior during Precision Glass Moulding of Fused Silica
Grunwald, Tim; Wilhelm, Dennis Patrick; Dambon, Olaf; Bergs, Thomas
Journal Article
2018Protecting sub-micrometer surface features in polymers from mechanical damage using hierarchical patterns
Rößler, Florian; Lasagni, Andrés-Fabián
Journal Article
2018Wear mechanisms and abrasion rates in selective laser sintering materials
Ziegler, T.; Hernandez Marquez, J.; Jaeger, R.; Phommahavong, S.
Journal Article
2017A novel approach to determine the diamond occupancy of diamond wires for optimized cutting processes for crystalline silicon
Lottspeich, L.; Theophil, L.; Fuchs, M.; Kaden, T.
Conference Paper
2016Increasing the efficiency of forging operations using adjusted tribological surfaces enhanced by hard coatings
Behrens, B.-A.; Bouguecha, A.; Husic, A.; Baumer, M.; Paschke, H.; Lippold, L.
Journal Article
2016Influence of Microstructures on Tribological Systems - Development of Process and Surface Structure
Regel, Gerhard; Putz, Matthias; Blau, Peter; Hochmuth, Carsten; Frieß, Uwe; Fiedler, Maik
Journal Article, Conference Paper
2016The influence of the initial near-surface microstructure and imposed stress level on the running-in characteristics of lubricated steel contacts
Brink, A.; Lichtenberg, K.; Scherge, M.
Journal Article
2016Potential controlled tribological behavior of water-based ionic liquids
Amann, T.; Dold, C.; Kailer, A.
Conference Paper
2016Tribological investigation of silicon-modified DLC coatings for the dry forming of aluminium alloys
Abraham, T.; Bräuer, G.; Kretz, F.; Groche, P.
Conference Paper
2015Dependence of tribofilm characteristics on the running-in behavior of aluminum-silicon alloys
Stoyanov, P.; Linsler, D.; Schlarb, T.; Scherge, M.; Schwaiger, R.
Journal Article
2015Development of high-performance extrusion barrels with innovative gradient coatings
Lemke, Jannis Nicolas; Rovatti, Ludovica; Lecis, Nora Francesca; Zarini, Stefano; Previtali, Barbara; Vedani, Maurizio; Stejskal, Ondřej; Kubisch, Frank; Pfennig, Martin; Brückner, Frank; Nowotny, Steffen; Leunda, Josu; Soriano, Carlos; Sanz, Carmen; Bouaifi, Belkacem; Schbieb, Don; Andrianopoli, Chiara; Garmendia, X.
Conference Paper
2015Elektrisch leitfähige Schmierstoffe für adaptive Tribosysteme - Motivation und Synthese von leitfähigen Schmierstoffen
Kailer, A.; Altmann, P.; Grundei, S.; Schubert, T.; Ahrens, M.; Dornhöfer, G.; Dellwo, U.
Conference Paper
2015Energy filtering transmission electron microscopy and atomistic simulations of tribo-induced hybridization change of nanocrystalline diamond coating
Barros Bouchet, M.I. de; Matta, C.; Vacher, B.; Le-Mogne, T.; Martin, J.M.; Lautz, J. von; Ma, T.; Pastewka, L.; Otschik, J.; Gumbsch, P.; Moseler, M.
Journal Article
2015Machining technologies for multi-materials
Gebhardt, Andreas; Vazquez Martinez, Hector; Mayer, Tim; Beckenlechner, Robert; Esch, Philipp
Conference Paper
2015Neue Konzepte zur Verschleißreduzierung bei Werkzeugen der Warmmassivumformung
Paschke, H.; Weber, M.; Yilkiran, T.
Journal Article
2015Wear of abrasive media and its effect on abrasive flow machining results
Bremerstein, Tina; Potthoff, Annegret; Michaelis, Alexander; Schmiedel, Christian; Uhlmann, Eckart; Blug, Bernhard; Amann, Tobias
Journal Article
2014Hybrid cutting of granite by use of ultrasonic assistance
Heise, Christoph; Böhm, Stefan; Schwarte, Stefan; Roscher, Hans-Jürgen; Kranz, Burkhard
Journal Article
2014Origins of folding instabilities on polycrystalline metal surfaces
Beckmann, N.; Romero, P.A.; Linsler, D.; Dienwiebel, M.; Stolz, U.; Moseler, M.; Gumbsch, P.
Journal Article
2014Superplastic deformation of Si3N4 based nanocomposites reinforced by nanowhiskers
Zgalat-Lozynskyy, O.; Andrzejczuk, Mariusz; Varchenko, V.; Herrmann, Mathias; Ragulya, Andrey; Polotai, Anton
Journal Article
2014Surface passivation and boundary lubrication of self-mated tetrahedral amorphous carbon asperities under extreme tribological conditions
Romero, A.P.; Pastewka, L.; Lautz, J.; Moseler, M.
Journal Article
2014Synthesis and tribological characterization of stable dispersions of thermally reduced graphite oxide
Schlüter, B.; Mülhaupt, R.; Kailer, A.
Journal Article
2014Taming the untamable - The art and science of diamond polishing
Moseler, M.; Pastewka, L.
Book Article
2014Wear, plasticity, and rehybridization in tetrahedral amorphous carbon
Kunze, T.; Posselt, M.; Gemming, S.; Seifert, G.; Konicek, A.; Carpick, R.; Pastewka, L.; Moseler, M.
Journal Article
2013Dental tribology at the microscale
Scherge, M.; Sarembe, S.; Kiesow, A.; Petzold, M.
Journal Article
2013Influences on the FEM-results of different parameters of the rotating straightening process
Kreiseler, Graziella
Conference Paper
2013Manufacturing of twist-free surfaces by hard turning
Schubert, Andreas; Zhang, Ran; Steinert, Philipp
Conference Paper, Journal Article
2013A mesoscopic model for the wear in tetrahedral amorphous carbon under shear
Lautz, J. von; Pastewka, L.; Moseler, M.; Gola, M.
Abstract
2013Running-in due to material transfer of lubricated steel/PA46 (aliphatic polyamide) contacts
Scherge, M.; Kramlich, J.; Böttcher, R.; Hoppe, T.
Journal Article
2013Seeing the third-body formation of metallic tribosystems by novel on-line tribometry
Dienwiebel, M.; Feser, T.; Korres, S.; Gola, M.
Abstract
2013Tribochemical effects during running-in of metals and alloys
Dienwiebel, M.; Feser, T.; Stoyanov, P.
Conference Paper
2013Wear of supported graphene
Klemenz, A.; Pastewka, L.; Caron, A.; Ganeshamurty, B.; Bennewitz, R.; Moseler, M.; Gola, M.
Abstract
2012CrC/a-C:H coatings for highly loaded, low friction applications under formulated oil lubrication
Keunecke, M.; Bewilogua, K.; Becker, J.; Gies, A.; Grischke, M.
Journal Article
2012Electric potentials effects on friction between silicon carbide surfaces in aqueous solutions
Lu, H.; Amann, T.; Kailer, A.
Conference Paper
2011Influence of electric potentials on the tribological behaviour of silicon carbide
Kailer, A.; Amann, T.; Krummhauer, O.; Herrmann, M.; Sydow, U.; Schneider, M.
Conference Paper, Journal Article
2011Preparation of a-C:H/a-C:H:Si:O and a-C:H/a-C:H:Si multilayer coatings by PACVD
Bewilogua, K.; Bialuch, I.; Ruske, H.; Weigel, K.
Journal Article
2011Rheological and tribological investigation of a mesogenic fluid with ultralow friction
Amann, T.; Kailer, A.
Conference Paper
2011Structuring of tribological active surfaces for reduction of frictional losses
Schubert, A.; Edelmann, J.; Sylla, D.; Hackert-Oschätzchen, M.
Conference Paper
2010Aluminum-rich TiAlCN coatings by low pressure CVD
Endler, I.; Höhn, M.; Herrmann, M.; Holzschuh, H.; Pitonak, R.; Ruppi, S.; Berg, H. van den; Westphal, H.; Wilde, L.
Journal Article, Conference Paper
2010Correlation between feed velocity and preloading in ball screw drives
Verl, Alexander; Frey, Siegfried
Journal Article
2010High performance machining of selected titanium alloys for aerospace applications
Neugebauer, Reimund; Dimitrov, D.; Oosthuizen, G.; Schmidt, G.; Treurnicht, N.; Blaine, D.
Conference Paper
2010Ultralow friction of mesogenic fluid mixtures in tribological reciprocating systems
Amann, T.; Kailer, A.
Journal Article
2010Ultralow friction of reciprocating systems lubricated by mesogenic fluids
Amann, T.; Kailer, A.
Conference Paper
2010Wear of carbon nitride coatings under oscillating sliding conditions
Wäsche, R.; Hartelt, M.; Springborn, U.; Bewilogua, K.; Keunecke, M.
Journal Article
2009Hydrothermal oxidation of silicon carbide and its bearing on wet wear mechanism
Nickel, K.G.; Presser, V.; Krummhauer, O.; Kailer, A.; Wirth, R.
Conference Paper
2009A model for wet silicon carbide tribo-corrosion
Presser, V.; Nickel, K.G.; Krummhauer, O.; Kailer, A.
Conference Paper, Journal Article
2009Nano Si3N4 composites with improved tribological properties
Schulz, I.; Herrmann, M.; Endler, I.; Zalite, I.; Speisser, B.; Kreusser, J.
Journal Article
2009Testing the feasibility of new ceramic cutting tools - a case study on experimental and numerical evaluation of geometry and machining techniques
Renz, A.; Kailer, A.; Koplin, C.
Conference Paper
2009Tribocorrosão da liga TI6AL4V em solução salina tamponada com fosfato
Manhabosco, Taíse M.; Muller, Iduvirges L.; Santos, Claudia Beatriz dos
Journal Article
2009Ultralow friction and wear of reciprocating systems lubricated by liquid crystalline fluids
Kailer, A.; Amann, T.; Konrath, G.; Janietz, D.; Sawade, H.
Conference Paper
2008Ceramic rolling tools for enhanced lifetime and product quality
Kailer, A.; Mauk, P.-J.; Eckardt, C.; Berroth, K.; Kozlowski, J.; Wageman, A.
Conference Paper
2007Keramische Walzensysteme aus Siliciumnitrid
Khader, I.; Gumbsch, P.; Kailer, A.
Conference Paper
2007Microstructure, hardness and cavitation erosion behaviour of Ti-6Al-4V laser nitrided under different gas atmospheres
Kaspar, J.; Bretschneider, J.; Jacob, S.; Bonß, S.; Winderlich, B.; Brenner, B.
Journal Article
2006Boron containing combination tool coatings - characterization and application tests
Keunecke, M.; Bewilogua, K.; Wiemann, E.; Weigel, K.; Wittorf, R.; Thomsen, H.
Journal Article
2006Crystallographic anisotropy of wear on a polycrystalline diamond surface
El-Dasher, B.S.; Gray, J.J.; Tringe, J.W.; Biener, J.; Hamza, A.V.; Wild, C.; Wörner, E.; Koidl, P.
Journal Article
2006DLC based coatings for tribological applications
Bewilogua, K.; Bialuch, I.; Brand, J.; Keunecke, M.; Ruske, H.; Thomsen, H.; Weber, M.; Wittorf, R.
Conference Paper
2006Influence of different interlayers and bias voltage on the properties of a-C:H and a-C:H:Me coatings prepared by reactive d.c. magnetron sputtering
Weber, M.; Bewilogua, K.; Thomsen, H.; Wittorf, R.
Journal Article
2006Shot peening of hard chromium coatings. Damage or benefit?
Pfeiffer, W.; Blug, B.; Wenzel, J.
Conference Paper
2005Ceramic rolls for wires
Kailer, A.; Hollstein, T.
Conference Paper
2004CBN coatings on cutting tools
Uhlmann, E.; Bräuer, G.; Wiemann, E.; Keunecke, M.
Journal Article
2004DLC based coatings prepared by reactive d.c. magnetron sputtering
Bewilogua, K.; Wittorf, R.; Thomsen, H.; Weber, M.
Conference Paper, Journal Article
2004Einsatz keramischer Schneidstoffe in der Stanztechnik
Schober, R.; Loibl, D.
Journal Article
2004Investigations on sticking temperature and wear of mold materials and wear of coatings
Rieser, D.; Manns, P.; Spieß, G.; Kleer, G.
Conference Paper
2004Reibungs und Verschleißverhalten von a-C:H-Schichten unter mediengeschmierten Bedingungen
Klaffke, D.; Hartelt, M.; Brand, J.; Brand, C.; Wittorf, R.
Journal Article
2003Chovani formového materialu ve styku se sklem
Rieser, D.; Manns, P.
Journal Article
2003Modelling of wear mechanisms at the abrasive waterjet cutting front
Henning, A.; Westkämper, E.
Conference Paper
2003Walzen mit Keramik
Kailer, A.
Journal Article
2002Shot peening of ceramics: Damage or benefit?
Pfeiffer, W.; Frey, T.
Journal Article
2000Effect of target material on deposition and properties of metal-containing DLC (Me-DLC) coatings
Bewilogua, K.; Cooper, C.V.; Specht, C.; Schröder, J.; Wittorf, R.; Grischke, M.
Conference Paper, Journal Article
2000Erratum to: Effect of target material on deposition and properties of metal-containing DLC (Me-DLC) coatings
Bewilogua, K.; Cooper, C.V.; Specht, C.; Schröder, J.; Wittorf, R.; Grischke, M.
Journal Article
2000Tribologie
Reschke, S.
Journal Article
1997Beschichtungen zur Verminderung der Umweltbelastung bei Umformprozessen
Taube, K.
Conference Paper
1997Beschichtungen zur Verminderung der Umweltbelastung bei Umformprozessen
Taube, K.; Straehler, B.
Conference Paper
1997Beschichtungen zur Verminderung der Umweltbelastung bei Umformprozessen. Teilvorhaben: Entwicklung und Charakterisierung geeigneter Schichtsysteme
Taube, K.
Report
1997Hochverschleißfeste Schichten auf Stahl und Titan
Techel, A.; Nowotny, S.
Conference Paper
1997Neuartige Methode zur Erzeugung hochverschleißfester Randschichten auf Titanlegierungen
Bonß, S.; Brenner, B.; Scheibe, H.J.; Franke, R.; Haase, I.
Conference Paper
1996Carbon-based coatings for dry sheet metal working
Taube, K.
Conference Paper
1996Effects of grain size and humidity on fretting wear in fine-grained alumina, Al2O3/TiC, and zirconia
Krell, A.; Klaffke, D.
Journal Article
1996New developments in surface technology. Laser alloying using Mo/VC and Mn
Klocke, F.; Rozsnoki, L.; Celiker, T.
Journal Article
1995Geregelte Prozeßführung zum Herstellen von Hartstoff-Dispersionsschichten mit CO2-Laser
Nowotny, S.; Boddin, G.-C.; Techel, A.; Luft, A.; Grünenwald, B.
Conference Paper
1995Glass in contact with mould materials for container production
Manns, P.; Döll, W.; Kleer, G.
Journal Article
1995Verschleißschutz durch Laserbeschichten mit wolframkarbidverstärkten Hartlegierungen
Nowotny, S.; Techel, A.
Conference Paper
1994Deposition of low energy coatings with DLC-like properties
Grischke, M.; Trojan, K.; Dimigen, H.
Conference Paper
1994High dose and intense implantation of the multiply charged Al plus n, Ti plus n and C plus n into alfa-iron
Pogrebnjak, A.D.; Bakharev, O.G.; Martynenko, V.A.; Rudenko, V.A.; Brusa, R.; Zecca, A.; Ryssel, H.; Tikhomirov, I.A.; Ryabchikov, A.I.; Öchsner, R.
Journal Article
1993Improvement of surface properties of polymers by ion implantation
Öchsner, R.; Kluge, A.; Zechel-Malonn, S.; Gong, L.; Ryssel, H.
Journal Article
1993Mechanical alloying reduces wear of self-lubricating materials
Günther, B.; Kunze, H.-D.; Veltl, G.; Takahashi, K.
Journal Article
1993Microstructure and wear properties of laser clad carbide coatings
Nowotny, S.; Techel, A.; Luft, A.; Reitzenstein, W.
Conference Paper
1993Microstructure, mechanical properties and wear of Si3N4/TiN composites
Herrmann, M.; Beger, A.; Schubert, C.; Hermel, W.; Meißner, E.; Ziegler, G.
Conference Paper
1993New technological developments in laser cladding
Grünenwald, B.; Nowotny, S.; Hennig, W.; Dausinger, F.; Hügel, H.
Conference Paper
1993Untersuchungen zum Einfluß von Schichtherstellparametern auf Hochtemperatur- und Verschleißverhalten von PVD-Schichten.
Kleer, G.; Döll, W.
Journal Article
1992Effect of process parameters on the residual stresses and the wear behavior of aluminium nitride physical vapor deposition coatings.
Kleer, G.; Kassner, R.; Meyer, E.-M.; Schinker, M.G.; Döll, W.
Journal Article
1992Reduction of friction and wear by ion-implanted carbonized photoresit
Bogen, S.; Gyulai, J.; Kluge, A.; Öchsner, R.; Ryssel, H.
Conference Paper
1992Reduction of friction and wear by ion-implanted carbonized photoresit
Bogen, S.; Gyulai, J.; Kluge, A.; Öchsner, R.; Ryssel, H.
Conference Paper
1992Reibbeanspruchte Materialien für Reinraumanwendungen
Kaun, R.
Conference Paper
1991Microstructure and wear behaviour of metal-containing diamond-like coatings
Dimigen, H.; Klages, C.-P.
Journal Article, Conference Paper
1991Reinraumtauglichkeit von Materialien
Kaun, R.
Conference Paper
1990Surface treatment of car engine components with laser radiation
Wissenbach, K.; Gasser, A.; Kreutz, E.W.; Küpper, F.; Zwick, A.; Beyer, E.
Conference Paper
1987An age-wear dependent model of failure
Giglmayr, J.
Journal Article