Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2018The effect of torsional vibrations on metal cutting dynamics
Otto, Andreas; Kolouch, Martin; Radons, Günter
Journal Article, Conference Paper
2018Optimization of a vibration absorber with piezoelectric energy harvesting capabilities
Perfetto, Sara
Dissertation
2017Design of experiment and pitfalls of low-velocity pendulum impact testing
Polocoser, T.; Kasal, B.; Li, X.
Journal Article
2017Modelling of contact interfaces using non-homogenous discrete elements to predict dynamical behaviour of assembled structures
Sharma, Anuj
: Melz, Tobias (Berichterstatter); Schweizer, Bernhard (Mitberichterstatter)
Dissertation
2017Stability of milling with non-uniform pitch and variable helix tools
Otto, Andreas; Rauh, Stefan; Ihlenfeldt, Steffen; Radons, G.
Journal Article
2017Vibration Sensor Monitoring of Nickel-Titanium Alloy Turning for Machinability Evaluation
Segreto, T.; Caggiano, A.; Karam, S.; Teti, R.
Journal Article
2016A scaling method for vibrating structures using global sensitivity analysis
Adams, Christian; Bös, Joachim; Melz, Tobias
Conference Paper
2016Transmission acoustics between end-of-line testing and vehicle rating
Knöfel, Björn; Troge, Jan; Drossel, Welf-Guntram
Journal Article
2016Vibrations of Elliptically Shaped Bearings in Strain Wave Gearings
Adams, Christian; Skowronek, Adam; Bös, Joachim; Melz, Tobias
Journal Article
2015Load and frequency interaction effects in dynamic buckling of soft core sandwich structures
Hohe, J.
Journal Article
2014Deep drawing with superimposed low-frequency vibrations on servo-screw presses
Kriechenbauer, Sebastian; Mauermann, Reinhard; Muller, Peter
Journal Article, Conference Paper
2014Development of functionally integrated mounts for three- and six-axial vibration isolation of sensitive equipment
Bartel, T.; Gaisbauer, Samuel; Stöhr, P.; Herold, S.; Melz, T.
Conference Paper
2014Effect of uncertain boundary conditions and uncertain axial loading on lateral vibration attenuation of a beam with shunted piezoelectric transducers
Götz, Benedict; Platz, Roland; Melz, T.
Conference Paper
2014Extension of Tlusty's law for the identification of chatter stability lobes in multi-dimensional cutting processes
Otto, A.; Rauh, S.; Kolouch, M.; Radons, G.
Journal Article
2014Simulation of the 3D Sound Propagation and Radiation of a Railway Air Conditioning Unit based on Transfer Matrix Techniques
Troge, Jan; Starobinski, Rudolf; Drossel, Welf-Guntram; Kunze, Holger; Linke, Moritz; Knöfel, Björn
Conference Paper
2014Structure-borne Sound Source and Transfer Path Analysis of coupled Structures using the Example of a Railway Air Conditioning Unit
Troge, Jan; Knöfel, Björn; Drossel, Welf-Guntram; Kunze, Holger; Linke, Moritz
Conference Paper
2014Vibration-based energy harvesting with stacked piezoelectrets
Pondrom, P; Hillenbrand, J.; Sessler, G.M.; Bös, J.; Melz, T.
Journal Article
2014Vibrational energy flow in carbon composite structures
Jaber, Mariam; Schneeweiß, Helmut; Bös, Joachim; Melz, Tobias
Conference Paper
2013Aktive Vibrationskontrolle einer Leichtbaustruktur mit EAP-Aktorik
Kaal, William; Herold, Sven; Mayer, Dirk; Millitzer, Jonathan
Conference Paper
2013Development and testing of active vibration control systems with piezoelectric actuators
Bartel, Torsten; Herold, S.; Mayer, D.; Melz, Tobias
Conference Paper
2013Parameters influencing the vibration excitation in elliptically deformed ball bearings
Skowronek, Adam; Kuhl, Steffen; Bös, Joachim; Hanselka, Holger
Conference Paper
2013Performance optimization of an adaptive vibration absorber using a design to reliability approach
Pfeiffer, Thomas; Janssen, Enrico; Nuffer, Jürgen; Melz, T.
Conference Paper
2013Structure-borne sound source characterization using the example of a roof air conditioning unit from a railway vehicle
Knöfel, Björn; Drossel, Welf-Guntram; Kunze, Holger; Troge, Jan; Seifert, Jonathan
Conference Paper
2012Realization and testing of an in-service vibration analysis system for structural health monitoring
Mayer, D.; Friedmann, A.; Koch, M.; Dornbusch, T.
Conference Paper
2012Tuneable spring element for an adaptable vibration absorber
Hansmann, J.; Kaal, William; Seipel, Björn; Melz, Tobias
Journal Article
2011Comparative operational modal analysis: Application of a semi-active vibration absorber to a manufacturing machine
Schmidt, M.; Atzrodt, H.; Sabirin, C.R.; Rue, G. de; Melz, T.
Conference Paper
2011Design of a seismic piezoelectric acceleration sensor
Bartel, Torsten; Baghaie, M.; Melz, Tobias; Tarle, P.
Conference Paper
2011Entwicklung eines hybriden aktiven Lagerungssystems mit paralleler Krafteinleitung
Kraus, Roman; Millitzer, Jonathan; Hatzfeld, Christian; Werthschützky, Roland
Conference Paper
2011Micro electro discharge machining of electrically nonconductive ceramics
Schubert, A.; Zeidler, H.; Wolf, N.; Hackert, M.
Conference Paper
2011On modeling of energy self-sufficient vibration absorber sensor modules
Kurch, Matthias; Mayer, Dirk
Conference Paper
2011Realistische Bewertung schwingungsaktiver Maschinen und deren Lagerungen mittels aktiver Anbindungsimpedanzen
Jungblut, Timo; Wolter, Stefan; Hanselka, Holger
Conference Paper
2011Schwingungsminderung an einer Tragwerkstruktur mit Hilfe Adaptiver Tilger
Röglin, T.; Sabirin, C.; Rausch, J.; Mayer, D.
Conference Paper
2011Using static modes to correct the modal approach for making state space models of piezo-mechanical vibration systems
Kranz, Burkhard; Drossel, Welf-Guntram
Presentation
2011Zuverlässigkeitsbewertung eines adaptronischen Systems zur aktiven Vibrationsminderung
Flaschenträger, D.; Nuffer, J.; Hofmann, D.; Gäng, J.; Bertsche, B.
Journal Article
2010Active noise and vibration reduction: Classification scheme and application examples
Matthias, M.; Bös, J.; Hanselka, H.
Conference Paper
2010Aktive Systeme zur Schwingungsminderung und Reduktion von Schallemissionen
Linke, M.; Bräunig, J.; Kunze, H.
Conference Paper
2010Aktiver Tilger zur Unterdrückung tonaler Schallemissionen an Windenergieanlagen
Neugebauer, Reimund; Linke, M.; Drossel, W.-G.; Kunze, H.; Ullrich, M.
Conference Paper
2010Approaches for distributed active and passive vibration compensation
Mayer, D.; Herold, S.; Koch, T.
Conference Paper
2010Energy flow in active systems
Bös, J.; Hanselka, H.; Bartylla, D.; Buckert, S.
Conference Paper
2010Holistic simulation of smart structures - active mount application
Jungblut, Timo; Herold, Sven; Matthias, Michael; Thiel, J.
Conference Paper
2010Implementation of micro-EDM for machining of nonconductive ceramics
Schubert, A.; Zeidler, H.
Conference Paper
2010Modelling of an active mounted plate by means of the superposition of a rigid body and an elastic model
Bartel, T.; Atzrodt, H.; Melz, T.
Conference Paper
2010Using the random decrement method for the decentralized acquisition of modal data
Friedmann, A.; Koch, M.; Mayer, D.
Conference Paper
2009Applications and design guidelines for metal foams constructions in machine tools
Hipke, T.
Conference Paper
2009Berechnung der Verbindungsqualität beim Ultraschall-Wedge-Wedge-Bonden
Gaul, H.
Dissertation
2009Damping of spindle vibrations by active magnetic bearing
Neugebauer, Reimund; Böttcher, R.; Hanisch, H.; Keller, H.; Wabner, M.
Presentation
2009Entwurf, Auslegung und Konstruktion eines adaptiven Mechanismus zur Amplitudenreduktion in Torsionsschwingungssystemen
Menzer, M.
Thesis
2008Active mounts for marine application
Matthias, M.; Mayer, D.; Herold, S.
Conference Paper
2008Design and application of an active vibration control system for a marine engine mount
Kauba, M.; Herold, S.; Koch, T.; Mayer, D.; Melz, T.
Conference Paper
2008Design, implementation and testing of an active system for structure-borne-noise and vibration reduction
Thomaier, M.; Melz, T.; Drögemüller, T.
Abstract
2008Reduction of compressor vibrations by means of an active tuned vibration absorber
Bös, J.; Janssen, E.; Kauba, M.; Mayer, D.
Conference Paper
2008Regelung eines dreiachsigen Lagers auf Basis piezoelektrischer Aktoren zur Schwingungsreduktion
Mayer, D.; Atzrodt, H.; Herold, S.
Journal Article
2007Active mounts for marine application
Matthias, M.; Friedmann, A.; Koch, T.; Drögemüller, T.
Conference Paper
2007Active vibration control applied to a tram HVAC unit
Bös, J.; Mayer, D.; Kauba, M.
Conference Paper
2007Development and testing of an active system for the reduction of breadboard vibrations
Atzrodt, H.; Herold, S.; Reimann, A.
Conference Paper
2007Implementation of a decentralized vibration control system based on positive position feedback
Kauba, M.; Mayer, D.
Conference Paper
2007Optimization of distributed positive position feedback controllers
Kauba, M.; Mayer, D.
Conference Paper
2007Vibration based damage diagnosis of an aircraft structure using piezoelectric transducers
Käsgen, J.; Mayer, D.
Conference Paper
2007Zur Abreinigung getauchter Membranen mittels mechanischer Schwingungen
Issa, M.
Dissertation
2006Comparison of various active vibration and noise reduction approaches applied to a planar test structure
Bös, J.; Mayer, D.
Conference Paper
2006Design and application of a semi-active electromechanical vibration absorber
Bös, J.; Mayer, D.
Conference Paper
2006Hipertrack / SPURT
Kieninger, M.; May, U.; Lipp, K.
Conference Paper
2006Hybrid WHEELSET cuts weight and noise
Große-Hovest, M.; Fischer, G.; Velten, B.; Cervello, S.
Journal Article
2006Numerical optimization of the thickness distribution of three-dimensional structures with respect to their structural acoustic properties
Bös, J.
Journal Article
2006Reduced sound emissions of facades using active control techniques
Hanselka, H.; Bein, T.; Kurtze, L.; Doll, T.
Conference Paper
2006Simulation of active systems in a NVH full car model
Atzrodt, H.; Herold, S.; Mayer, D.
Conference Paper
2006The use of intelligent material systems in advanced automotive systems
Bein, T.; Herold, S.; Mayer, D.; Melz, T.; Seipel, B.
Conference Paper
2006Vibration control with adaptive structures
Hanselka, H.; Melz, T.; Drossel, W.-G.; Sporn, D.; Schönecker, A.; Poigné, A.
Conference Paper
2006Virtual prototyping of active noise and vibration solutions
Auweraer, H. van der; Herold, S.; Mohring, J.; Oliviera, L. de; Pinte, G.
Conference Paper
2005Design of a smart interface for vibration reduction in complex structures
Melz, T.; Matthias, M.; Thomaier, M.
Conference Paper
2005The Fraunhofer MAVO FASPAS for smart system design
Melz, T.; Matthias, M.; Drossel, W.-G.; Sporn, D.; Schönecker, A.; Poigné, A.
Conference Paper
2005Monitoring system for delamination detection
Lehmann, M.; Büter, A.; Frankenstein, B.; Schubert, F.; Brunner, B.
Conference Paper
2005Nondestructive testing of finger-jointed structural timber: Overview of possible methods, results of preliminary evaluations, and possibilities for industrial implementation
Plinke, B.
Conference Paper
2005Simulation of a complete system using the example of an active interface fo vibration reduction
Thomaier, M.; Atzrodt, H.; Mayer, D.; Melz, T.
Conference Paper
2004Adaptive rotor blade concepts. Direct twist and camber variation
Büter, A.; Hanselka, H.
Book Article
2004Comparison of a deterministic and a genetic algorithm applied to structural acoustic optimization
Bös, J.
Conference Paper
2004Design and application of a low-cost microphone array for nearfield acoustical holography
Bös, J.; Kurtze, L.
Conference Paper
2004Low-vibration gearbox- a comparison of two different numerical optimization strategies
Bös, J.
Conference Paper
2004Numerical structural acoustic optimization of a gearbox
Bös, J.
Conference Paper
2004Safeguard seat
Hostens, I.; Amditis, A.; Stefani, O.; Dangelmaier, M.; Bekiaris, E.; Schaerli, H.; Bullinger, A.; Ramon, H.
Journal Article
2004Transient simulation of adaptive structures
Herold, S.; Mayer, D.; Hanselka, H.
Journal Article
2003Design proposals for low-vibration and/or lightweight structures by means of numerical optimization
Bös, J.; Nordmann, R.
Conference Paper
2003Development of an active rotor blade for vibration and noise reduction
Büter, A.; Keye, S.
Conference Paper
2002Entwicklung und Qualifikation modularer Satellitensysteme zur adaptiven Vibrationskompensation an mechanischen Kryokühlern
Melz, T.
: Hanselka, H. (Prüfer)
Dissertation
2002Newest results and future of the German major project ADAPTRONICS
Monner, H.P.; Hanselka, H.; Breitbach, E.J.
Conference Paper
1999Extending speckle pattern interferometry for use on a microscopic scale
Aswendt, P.; Höfling, R.; Hiller, K.; Wiemer, M.
Conference Paper
1999Optical full-field technique for measuring deflection and strain on micromechanical components
Aswendt, P.; Höfling, R.; Hiller, K.
Conference Paper
1999Testing microcomponents by speckle interferometry
Aswendt, P.; Höfling, R.; Hiller, K.
Conference Paper
1998Alternative solders for flip chip applications in the automotive environment
Jung, E.; Heinricht, K.; Klöser, J.; Aschenbrenner, R.; Reichl, H.
Conference Paper
1993Vibration analysis system collects spatial information
Roll, R.
Journal Article
1991Temperatur- und Frequenzabhängigkeit des mechanischen Verhaltens von Elastomeren
Braunmiller, U.; Kilian, H.-G.; Sauter, A.
Conference Paper
1990Constitutive equations for dynamically loaded polymer solids and their application in a finite element program
Geißler, E.; Weber, H.
Conference Paper
1990Temperatur und Frequenzabhängigkeit des mechanischen Verhaltens von Elastomeren
Sauter, A.; Braunmiller, U.; Kilian, H.-G.
Conference Paper