Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2016Composition and mechanical properties of B-C-W and B-C-Ti thin films prepared by pulse magnetron sputtering
Friedemann, Martin; Klostermann, Heidrun
Journal Article, Conference Paper
2016Numerical exploration into the potential of tungsten reinforced CuCrZr matrix composites
Hohe, J.; Fliegener, S.; Findeisen, C.; Reiser, J.; Widak, V.; Rieth, M.
Journal Article
2015Surface softening in metal-ceramic sliding contacts: An experimental and numerical investigation
Stoyanov, P.; Merz, R.; Romero, P.A.; Wählisch, F.C.; Torrents Abad, O.; Gralla, R.; Stemmer, P.; Kopnarski, M.; Moseler, M.; Bennewitz, R.; Dienwiebel, M.
Journal Article
2013Experimental and numerical atomistic investigation of the third body formation process in dry tungsten/tungsten-carbide tribo couples
Stoyanov, P.; Romero, P.A.; Jaervi, T.; Pastewka, L.; Scherge, M.; Stemmer, P.; Fischer, A.; Dienwiebel, M.; Moseler, M.
Journal Article
2013Tribochemical effects during running-in of metals and alloys
Dienwiebel, M.; Feser, T.; Stoyanov, P.
Conference Paper
2010On the potential of tungsten-vanadium composites for high temperature application in nuclear fusion
Hohe, J.; Gumbsch, P.
Conference Paper
2009Atomistic simulations of lattice defects in tungsten
Mrovec, M.; Elsässer, C.; Gumbsch, P.
Conference Paper
2009Gaussian distribution of inhomogeneous barrier height in tungsten/4H-SiC (000-1) Schottky diodes"
Toumi, S.; Ferhat-Hamida, A.; Boussouar, L.; Sellai, A.; Ouennoughi, Z.; Ryssel, H.
Journal Article, Conference Paper
2009Interactions between lattice dislocations and twin boundaries in tungsten: A comparative atomistic simulation study
Mrocev, M.; Elsässer, C.; Gumbsch, P.
Journal Article
2008Recent improvements in the integration of field emitters into scanning probe microscopy sensors
Beuer, S.; Rommel, M.; Petersen, S.; Amon, B.; Sulzbach, T.; Engl, W.; Bauer, A.J.; Ryssel, H.
Conference Paper, Journal Article
2007Multi-grain finite element model for studying the wire drawing process
Ocenasek, J.; Rodriguez Ripoll, M.; Weygand, S.M.; Riedel, H.
Conference Paper, Journal Article
2006Numerical simulation of the drawing process of tungsten wires
Weygand, S.M.; Riedel, H.; Eberhard, B.; Wouters, G.
Conference Paper, Journal Article
2003Models for fracture toughness in the semi-brittle regime
Hartmaier, A.; Gumbsch, P.
Conference Paper
2001Characterization of the delamination behavior of tungsten based alloys by means of acoustic emission
Traxler, H.; Arnold, W.; Resch, J.; Knabl, W.; Leichtfried, G.
Conference Paper
1997IFAM advancing MIM technology
Weber, M.; Petzoldt, F.; Hartwig, T.; Veltl, G.
Journal Article
1995Conductivity and reproducibility of e-beam induced deposited tungsten lines
Kohlmann van Platen, K.T.; Schmidt, L.; Brünger, W.H.
Conference Paper
1989Strain rate dependence of mechanical behaviour and evaluation of the microstructure of tungsten monocrystals
Chiem, C.Y.; Meyer, L.W.
Conference Paper
1989X-ray mask repair by electron beam induced metal deposition
Brünger, W.H.
Conference Paper