Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Ab initio thermodynamics study of ambient gases reacting with amorphous carbon
Held, A.; Moseler, M.
Journal Article
2019Friction and Deformation Behavior of Elastomers
Adam, Alexander; Paulkowski, Dominik; Mayer, Bernd
Journal Article
2019Positive effect of laser structured surfaces on tribological performance
Stark, Tobias; Alamri, Sabri; Aguilar-Morales, Alfredo Ismael; Kiedrowski, Thomas; Lasagni, Andrés-Fabián
Journal Article
2019Solids under extreme shear: Friction-mediated subsurface structural transformations
Greiner, C.; Gagel, J.; Gumbsch, P.
Journal Article
2018Discrete dislocation dynamics simulations of dislocation transport during sliding
Gagel, J.; Weygand, D.; Gumbsch, P.
Journal Article
2018Effect of mechanochemically functionalized multilayer graphene on the tribological properties of silicon carbide/graphene nanocomposites in aqueous environment
Zhang, W.; Schröder, C.; Schlüter, B.; Knoch, M.; Dusza, J.; Sedlak, R.; Mülhaupt, R; Kailer, A.
Journal Article
2018Microstructure evolution and deformation mechanisms during high rate and cryogenic sliding of copper
Chen, X.; Schneider, R.; Gumbsch, P.; Greiner, C.
Journal Article
2018A new approach for dry metal forming: CO2 as volatile lubrication in combination with hard and low friction coatings
Umlauf, Georg; Hasselbruch, Henning; Henze, Jan-Hinnerk; Barz, Jakob; Mehner, Andreas
Journal Article, Conference Paper
2018Observation of the a-C:H run-in behaviour for dry forming applications of aluminium
Abraham, T.; Bräuer, G.; Kretz, F.; Groche, P.
Conference Paper
2018Stages in the tribologically-induced oxidation of high-purity copper
Liu, Z.; Patzig, C.; Selle, S.; Höche, T.; Gumbsch, P.; Greiner, C.
Journal Article
2018Wear mechanisms and abrasion rates in selective laser sintering materials
Ziegler, T.; Hernandez Marquez, J.; Jaeger, R.; Phommahavong, S.
Journal Article
2017Influence of post-treatment on the microstructural and tribomechanical properties of suspension thermally sprayed WC-12 wt%Co nanocomposite coatings
Ali, O.; Ahmed, R.; Faisal, N.H.; Alazani, N.M.; Berger, Lutz-Michael; Kaiser, Arno; Toma, Filofteia-Laura; Polychroniadis, E.K.; Sall, M.; Elakwah, Y.O.; Goosen, M.F.A.
Journal Article
2016Boundary lubrication of heterogeneous surfaces and the onset of cavitation in frictional contacts
Savio, D.; Pastewka, L.; Gumbsch, P.
Journal Article
2016Increasing the efficiency of forging operations using adjusted tribological surfaces enhanced by hard coatings
Behrens, B.-A.; Bouguecha, A.; Husic, A.; Baumer, M.; Paschke, H.; Lippold, L.
Journal Article
2016Influence of Microstructures on Tribological Systems - Development of Process and Surface Structure
Regel, Gerhard; Putz, Matthias; Blau, Peter; Hochmuth, Carsten; Frieß, Uwe; Fiedler, Maik
Journal Article, Conference Paper
2015Dependence between friction of laser interference patterned carbon and the thin film morphology
Roch, Teja; Benke, Dimitri; Milles, Stephan; Roch, Aljoscha; Kunze, Tim; Lasagni, Andrés-Fabián
Journal Article
2015Frictional and thermal behavior of tool materials and tool coatings for press hardening
Landgrebe, Dirk; Schieck, Frank; Müller, Roland; Mosel, Andre´
Conference Paper
2015Sliding wear investigation of suspension sprayed WC-Co nanocomposite coatings
Ahmed, Rehan R.; Ali, O.; Faisal, Nadimul Haque; Al-Anazi, N.M.; Al-Mutairi, Saleh H.; Toma, Filofteia-Laura; Berger, Lutz-Michael; Potthoff, Annegret; Goosen, Mattheus F.A.
Journal Article
2015Structure property relationship of suspension thermally sprayed WC-Co nanocomposite coatings
Ahmed, Rehan R.; Faisal, N.H.; Al-Anazi, Nayef; Al-Mutairi, S.; Toma, Filofteia-Laura; Berger, Lutz-Michael; Potthoff, Annegret; Polychroniadis, E.K.; Sall, M.; Chaliampalias, D.; Goosen, Mattheus F.A.
Journal Article
2014Adaptronic form honing - Manufacturing methods for compensating cylinder bore distortions
Neugebauer, Reimund; Hochmuth, Carsten; Schneider, Rene
Conference Paper
2014Microstructuring of surfaces by two-stage vibration-assisted turning
Zhang, Ran; Steinert, Philipp; Schubert, Andreas
Journal Article, Conference Paper
2014Surface engineering by microstructuring processes
Schubert, Andreas; Zeidler, Henning; Funke, Roman; Edelmann, Jan; Börner, Richard
Presentation
2014Synthesis and tribological characterization of stable dispersions of thermally reduced graphite oxide
Schlüter, B.; Mülhaupt, R.; Kailer, A.
Journal Article
2014Wear, plasticity, and rehybridization in tetrahedral amorphous carbon
Kunze, T.; Posselt, M.; Gemming, S.; Seifert, G.; Konicek, A.; Carpick, R.; Pastewka, L.; Moseler, M.
Journal Article
2013An adaptronic system to control shape and surface of liner bores during the honing process
Drossel, Welf-Guntram; Hochmuth, Carsten; Schneider, Rene
Journal Article, Conference Paper
2013Characterisation of the friction and wear behaviour of textile reinforced polymer composites in contact with diamond-like carbon layers
Andrich, M.; Hufenbach, W.; Kunze, K.; Scheibe, H.-J.
Journal Article
2013Direct laser interference patterning of tetrahedral amorphous carbon films for tribological applications
Roch, T.; Weihnacht, V.; Scheibe, H.-J.; Roch, A.; Lasagni, A.F.
Journal Article
2013Functionalized graphene: Fabrication and tribological behavior in ester oil
Schlüter, B.; Kailer, A.; Mülhaupt, R.; Gola, M.
Abstract
2013Investigation of HVOF-sprayed hardmetal coatings for static friction applications
Berger, Lutz-Michael; Spatzier, Jörg; Gräfensteiner, M.; Vidner, J.; Leidich, Erhard; Schiefer, S.; Gröger, Sophie; Gerlach, Marco
Conference Paper
2013Manufacturing of twist-free surfaces by hard turning
Schubert, Andreas; Zhang, Ran; Steinert, Philipp
Conference Paper, Journal Article
2013Seeing the third-body formation of metallic tribosystems by novel on-line tribometry
Dienwiebel, M.; Feser, T.; Korres, S.; Gola, M.
Abstract
2013Tribochemical effects during running-in of metals and alloys
Dienwiebel, M.; Feser, T.; Stoyanov, P.
Conference Paper
2013Tribological properties of imidazolium-based ionic liquids and the influence of polarization
Dold, C.; Amann, T.; Kailer, A.; Gola, M.
Abstract
2012Adaptronic form honing - manufacturing methods for compensating cylinder bore distortions
Neugebauer, Reimund; Hochmuth, Carsten; Schneider, Rene
Presentation
2012Bond order potentials for fracture, wear, and plasticity
Pastewka, L.; Mrovec, M.; Moseler, M.; Gumbsch, P.
Journal Article
2012Press hardening - on innovative and challenging technology
Neugebauer, Reimund; Schieck, Frank; Polster, Stefan; Mosel, Andre; Rautenstrauch, Anja; Schönherr, Julia; Pierschel, Norbert
Conference Paper
2012Wear reduction at hot forging dies with duplex processes using nitriding and plasma deposition techniques
Behrens, B.-A.; Yilkiran, T.; Paschke, H.; Weber, M.
Conference Paper
2011Manufacturing of surface microstructures for improved tribological efficiency of powertrain components and forming tools
Schubert, Andreas; Neugebauer, Reimund; Sylla, David; Avila, Miguel; Hackert, Matthias
Journal Article
2011Structuring of tribological active surfaces for reduction of frictional losses
Schubert, A.; Edelmann, J.; Sylla, D.; Hackert-Oschätzchen, M.
Conference Paper
2010Experimentelle und numerische Betrachtungen zum tribologischen Verhalten von DLC- und hartstoffschichten in Kontakt mit aluminiumbasierten Werkstoffen
Wielage, B.; Neugebauer, Reimund; Lampke, T.; Hochmuth, C.; Rupprecht, C.; Schmidt, G.; Nehrkorn, S.; Oppermann, C.
Presentation
2010Micromanufacturing of hard to machine materials by physical and chemical ablation processes
Schubert, A.; Edelmann, J.; Groß, S.; Zeidler, H.; Meichsner, G.; Hackert, M.; Wolf, N.; Schneider, J.
Conference Paper
2010New characterization methods for the assessment and the design of friction optimized surfaces
Gröger, S.; Burkhardt, T.; Eckert, U.; Kühn, C.
Conference Paper
2009A model for wet silicon carbide tribo-corrosion
Presser, V.; Nickel, K.G.; Krummhauer, O.; Kailer, A.
Conference Paper, Journal Article
2008The running-in of amorphous hydrocarbon tribocoatings
Pastewka, L; Moser, S.; Moseler, M.; Blug, B.; Meier, S.; Hollstein, T.; Gumbsch, P.
Journal Article
2007Werkstoffe für den Einsatz in reinen Bereichen
Westkämper, Engelbert; Smolinski, Dirk; Kreck, Guido; Gommel, Udo
Journal Article
2005Ceramic rolls for wires
Kailer, A.; Hollstein, T.
Conference Paper
2005Structure and properties of polymer-fullerene composite films deposited by a combined process of thermal sublimation and plasma polymerization (Poster)
Kiesow, A.; Kailer, A.; Löschner, K.; Heilmann, A.
Abstract
2004Influencing factors on microtribology of DLC films for MEMS and microactuators
Bandorf, R.; Lüthje, H.; Staedler, T.
Conference Paper, Journal Article
2002Werkstofftrends: Tribologie
Reschke, S.; Kohlhoff, J.; Kretschmer, T.
Journal Article
2001Correlation of nanomechanical and nanotribological behavior of thin DLC coatings on different substrates
Staedler, T.; Schiffmann, K.
Journal Article
2000Tribologie
Reschke, S.
Journal Article
2000Tribologisches Messverfahren zur Bestimmung von Lackschichteigenschaften
Michels, D.; Scheibe, A.
Journal Article
1998Deposition of carbon nitride thin films in a hybrid r.f.-PLD technique
Klotzbücher, T.; Scherge, M.; Mergens, M.; Wesner, D.A.; Kreutz, E.W.
Journal Article
1997Beschichtungen zur Verminderung der Umweltbelastung bei Umformprozessen. Teilvorhaben: Entwicklung und Charakterisierung geeigneter Schichtsysteme
Taube, K.
Report
1996Carbon-based coatings for dry sheet metal working
Taube, K.
Conference Paper
1994Deposition of low energy coatings with DLC-like properties
Grischke, M.; Trojan, K.; Dimigen, H.
Conference Paper
1992Bedeutung der Funktion "Instandhaltung"
Warnecke, H.-J.
Book Article
1992Reibbeanspruchte Materialien für Reinraumanwendungen
Kaun, R.
Conference Paper