| | |
---|
2021 | Fatigue failure criteria for structural film adhesive bonded joints with considerations of multiaxiality, mean stress and temperature Beber, Vinicius C.; Baumert, Madlen; Klapp, Oliver; Nagel, Christof | Journal Article |
2020 | Experimental and numerical investigation on the influence of thermally induced stress gradients on fatigue life of the nickel-base alloy MAR-M247 Thiele, M.; Eckmann, S.; Huang, M.; Gampe, U.; Fischer, K.A.; Schlesinger, M. | Journal Article |
2020 | Probabilistic fracture mechanics framework including crack nucleation of rotor forging flaws Radaelli, F.; Kadau, K.; Amann, C.; Gumbsch, P. | Conference Paper |
2020 | Quantification of formic acid and acetic acid emissions from heritage collections under indoor room conditions. Pt.1: Laboratory and field measurements Smedemark, Signe Hjerrild; Rhyl-Svendsen, Morten; Schieweck, Alexandra | Journal Article |
2019 | Assessing the operating temperature of multi-junction solar cells with novel rear side layer stack and local electrical contacts Alonso-Ãlvarez, D.; Weiss, C.; Fernandez, J.; Janz, S.; Ekins-Daukes, N. | Journal Article |
2019 | Parameter measurement and conductive heating during press hardening by hot metal gas forming Bach, Mirko; Degenkolb, Lars; Reuther, Franz; Psyk, Verena; Mauermann, Reinhard; Werner, Markus | Presentation |
2019 | Parameter measurement and conductive heating during press hardening by hot metal gas forming Bach, Mirko; Degenkolb, Lars; Reuther, Franz; Psyk, Verena; Mauermann, Reinhard; Werner, Markus | Conference Paper |
2019 | Transcriptome sequencing of a keystone aquatic herbivore yields insights on the temperature-dependent metabolism of essential lipids Windisch, Heidrun S.; Fink, Patrick | Journal Article |
2019 | Wireless sensor network for retrofitting production Systems Lemme, Gordon; Nölscher, Kilian | Conference Paper |
2018 | A bottom-up estimation of the heating and cooling demand in European industry Rehfeldt, Matthias; Fleiter, Tobias; Toro, Felipe | Journal Article |
2018 | The methods for controlled thermal deformations in machine tools Kuznetsov, Alexandr P.; Koriath, Hans-Joachim; Dorozhko, Alexey O. | Conference Paper |
2018 | Relevant plasma parameters for certification Gerling, T.; Helmke, A.; Weltmann, K.-D. | Book Article |
2017 | Fracture mechanics at elevated loading rates in the ductile to brittle transition region Mayer, U.; Reichert, T.; Tlatlik, J. | Conference Paper |
2017 | Kinetics of carrier-induced degradation at elevated temperature in multicrystalline silicon solar cells Kwapil, W.; Niewelt, T.; Schubert, M.C. | Journal Article |
2017 | Temperature induced compositional redistribution in blended insertion electrodes Heubner, Christian; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Journal Article |
2017 | Waveguide bragg gratings in Ormocer®s for temperature sensing Girschikofsky, Maiko; Rosenberger, Manuel; Förthner, Michael; Rommel, Mathias; Frey, Lothar; Hellmann, Ralf | Journal Article |
2016 | Degradation of silicon wafers at high temperatures for epitaxial deposition Rachow, T.; Reber, S.; Janz, S.; Knapp, M.; Milenkovic, N. | Journal Article |
2015 | Analytical modelling methods for temperature fields in metal cutting based on panel method of fluid mechancis Klocke, Fritz; Brockmann, Matthias; Gierlings, Sascha; Veselovac, Drazen; Roidl, Benedikt; Schmidt, Gerhard; Semmler, Ulrich; Kever, D. | Journal Article, Conference Paper |
2015 | Energy- and resource-efficient process routes in hot sheet metal forming Landgrebe, Dirk; Müller, Roland; Schieck, Frank | Conference Paper |
2015 | Temperature and strain rate related forming technologies for improved forming limits Landgrebe, Dirk; Schieck, Frank; Sterzing, Andreas | Presentation |
2013 | Bandgap determination based on electrical quantum efficiency Helmers, H.; Karcher, C.; Bett, A.W. | Journal Article |
2013 | A lifetime model for piezoceramic actuators in adaptronic systems Flaschenträger, D.; Nuffer, J. | Conference Paper |
2013 | Self-heating of Nano-Scale SOI MOSFETs: TCAD and Molecular Dynamics Simulations Burenkov, Alex; Belko, Viktor; Lorenz, Jürgen | Conference Paper |
2013 | Temperature-supported gas forming of ferritic stainless steel tubes Schieck, Frank; Drossel, Welf-Guntram; Albert, Andre | Conference Paper |
2012 | Battery thermomanagement in electric vehicles using phase change slurries Taetz, Christoph; Hanu, Lucian George; Kappels, Tobias; Pollerberg, Clemens; Dötsch, Christian; Weidner, Eckhard | Conference Paper |
2011 | Case study for welding simulation in the automotive industry Perret, W.; Thater, R.; Alber, U.; Schwenk, C.; Rethmeier, M. | Journal Article |
2010 | Prozessregelung beim Hot-Metal-Gasforming - Berührungslose Temperaturmessung ermöglicht Blick ins geschlossene Werkzeug Albert, A.; Paul, A.; Pröhl, M.; Demuth, R. | Journal Article |
2009 | Theoretische Betrachtungen zur idealen Netztemperatur Dötsch, C.; Bargel, S. | Conference Paper |
2009 | Theoretische Betrachtungen zur idealen Temperatur in Fernwärmenetzen auf Grundlage einer exergetischen Bewertung Dötsch, C.; Bargel, S. | Conference Paper |
2007 | High temperature reliability of organic light emitting diodes Lesiuk, P. | Thesis |
2006 | Sheet metal forming at elevated temperatures Neugebauer, Reimund; Altan, T.; Geiger, M.; Kleiner, M.; Sterzing, A. | Conference Paper, Journal Article |
2005 | Alloying and sintering behaviour of selected iron-graphite-master alloy powder mixtures Castro Pinto, F.; Sarasola, M.; Baumgaertner, F.; Dougan, M.; Mitchell, S.; Lipp, K.; Bender, H.; Coffin, C.; Dunkley, J. | Conference Paper |
2005 | Simulation des thermischen Bauteilverhaltens bei der Trockenbearbeitung Dürr, H.; Hoyer, K.; Hanke, M. | Journal Article |
2003 | DLC for tools protection in warm massive forming Reisel, G.; Wielage, B.; Steinhäuser, S.; Hartwig, H. | Conference Paper, Journal Article |
2001 | Locally selective bonding of silicon and glass with laser Wild, M.J.; Gillner, A.; Poprawe, R. | Journal Article |
2000 | A global self-heating model for device simulation Grasser, T.; Palankovski, V.; Quay, R.; Selberherr, S. | Conference Paper |
2000 | Service Load and Stress Distribution for P/M Gear Components Rupp, A.; Sonsino, C.M.; Radereau, D. | Report |
2000 | A temperature dependent model for the saturation velocity in semiconductor materials Quay, R.; Moglestue, C.; Palankovski, V.; Selberherr, S. | Journal Article |
1999 | Activated carbon based technology for the control of mercury emission from coal-fired power plants Liu, W.; Vidic, R.D.; Kümmel, R.; Fahlenkamp, H. | Conference Paper |
1999 | Keramik- und Stahlventile des PKW-Motorenbaus im Vergleich Brandt, U.; Reinheimer, G.; Mörgenthaler, K. | Conference Paper |
1998 | Influence of layout and packaging on the temperature of GaAs power PHEMTs Marsetz, W.; Dammann, M.; Kawashima, H.; Rüdiger, J.; Matthes, B.; Hülsmann, A.; Schlechtweg, M. | Conference Paper |
1998 | Optimization of process parameters for induction heat treating by means of numerical simulation Schöpfel, A.; Störzel, K. | Conference Paper |
1998 | Procedure for validation tests on air springs for commercial vehicles Fischer, G.; Grubisic, V. | Journal Article |
1998 | Procedure of validation tests in air springs for commercial vehicles Fischer, G.; Streicher, M.; Grubisic, V. | Report |
1997 | Bemessung von Keramikventilen für eine Serienfertigung Sonsino, C.M.; Brandt, U.; Störzel, K. | Conference Paper |
1997 | Methodology for durability validation of air springs Fischer, G.; Grubisic, V. | Conference Paper |
1995 | Effects of climatic parameters on formaldehyde concentrations in indoor air Salthammer, T.; Fuhrmann, F.; Kaufhold, S.; Meyer, B.; Schwarz, A. | Journal Article |
1995 | Elastisch-plastisches Materialverhalten von Gußeisen bei quasistatischer und zyklischer Belastung unter Berücksichtigung der bimodularen Eigenschaften im Zug- und Druckbereich und der Werkstoffporosität Günther, H.; Brandt, U.; Sonsino, C.M. | Journal Article |
1994 | Applications of single-beam photothermal analysis Schork, R.; Krügel, S.; Schneider, C.; Pfitzner, L.; Ryssel, H. | Journal Article |
1994 | Behaviour of fiber-reinforced plastics and estimation of components service strength Grubisic, V. | Conference Paper |
1994 | Characterizing the Combustion Process of new Gasgeneration Propellants Eckl, W.; Roche, T.; Weiser, V. | Conference Paper |
1994 | Magic-echo phase-encoding solid imaging of rubber materials below the glass transition temperature Barth, P.; Hafner, S.; Kuhn, W. | Journal Article |
1994 | Microstructural changes induced by grinding of Ni-base superalloy IN 738 LC and their relationship to machining parameters Österle, W.; Li, P.; Niewelt, P. | Journal Article |
1994 | Spektroskopische Untersuchung der UV/VIS-Strahlungsemission der Flamme des Flüssigtreibstoffes Nitromethan Eckl, W.; Eisenreich, N.; Weiser, V. | Conference Paper |
1994 | Untersuchung von Gasexplosionen mittels schneller optischer Meßsysteme Eckl, W.; Eisenreich, N.; Kull, H. | Conference Paper |
1993 | Laser-induced plasma formation during pulsed laser deposition Aden, M.; Kreutz, E.W.; Voss, A. | Journal Article |
1993 | Parameter extraction for HBT's temperature dependent large signal equivalent circuit model Baureis, P.; Seitzer, D. | Conference Paper |
1993 | Sensitivity tests for energetic materials. Langer, G.; Schedlbauer, F.; Ebeling, H. | Conference Paper |
1993 | Simulation der thermischen Entsorgung von TNT. Weiser, V.; Gröbel, V.; Krause, H.H. | Conference Paper |
1993 | Spektroskopische Temperaturmeßverfahren und optische Tomographie Ohmstede, G. | Book |
1993 | Use of high temperature-resistant sorbents as simulants for testing Wolff, E.; Pfaff, K.; Piringer, O.G. | Journal Article |
1992 | Combined fatigue and environmental test of SMC materials used for truck components Bigliani, U.; Revellino, M.; Savio, P.; Camino, G.; Fucale, M.; Luda, M.P.; Grubisic, V.; Müller, A. | Conference Paper |
1992 | Effect of temperature on shock metamorphism of single-crystal quartz. Langenhorst, F.; Deutsch, A.; Stöffler, D.; Hornemann, U. | Journal Article |
1992 | Measurement of radial gas phase temperature profiles in a 20-mm caliber gun Lawton, B.; Klingenberg, G. | Conference Paper |
1992 | Measurement of wafer temperature by interference Bollmann, D.; Haberger, K. | Conference Paper |
1992 | Öl-Luftschmierung von Wälzlagern Spur, G.; Göke, U. | Journal Article |
1992 | Schwingfestigkeit von Al2O3- und Si3N4-Keramiken Sonsino, C.M. | Report |
1991 | Anrissermittlung mit dem Gleichstrom-Potentialsonden-Verfahren Müller, F. | Book |
1991 | Experimentelle Untersuchungen von Flammengeometrie, Temperaturverteilung und Konzentrationsfeldern in Modell-Tankflammen verdampfender flüssiger Brennstoffe Eisenreich, N.; Krause, H.H.; Weiser, V. | Conference Paper |
1991 | Faseroptische Sensoren - Eine strahlende Zukunft Höfler, H.; Spenner, K. | Journal Article |
1991 | Investigation of highly pressurized two-phase, reacting flow. Klingenberg, G. | Book |
1991 | Klebstoffe und Oberflächenvorbehandlungsverfahren für kohlenstoffaserverstärkte Verbundkunststoffe Groß, A. | Book Article |
1991 | Werkstoffkennwerte für den Betriebsfestigkeitsnachweis von Faserverbundbauteilen Gerharz, J.J.; Huth, H.; Mattheij, P. | Book Article |
1990 | Berücksichtigung einsatztypischer Klimabedingungen bei der Festigkeitsuntersuchung von Faserverbundwerkstoffen Berg, M. | Conference Paper |
1990 | Crack growth and cyclic fatigue behaviour of sintered silicon nitride and syalon. Gehrke, E.; Berweiler, W.; Riedel, H. | Conference Proceedings |
1990 | Energy loss of heavy ions in a dense hydrogen plasma Dietrich, K.-G.; Hoffmann, D.H.H.; Wahl, H.; Haas, C.R.; Kunze, H.; Brandenburg, W.; Noll, R. | Journal Article |
1990 | Merkblätter für die Prüfung von Packmitteln. Merkblatt 58. Bestimmung der statischen Dauerbelastbarkeit von Faltschachtelklebenähten unter normalen Bedingungen und unter Wärmeeinwirkung | Journal Article |
1990 | Temperature dependence of third order elastic constants Mohrbacher, H.; Goebbels, K.; Schneider, E. | Conference Paper |
1990 | Temperaturverteilung auf der Oberfläche von Wärmekontakt-Schweißwerkzeugen in Verpackungsmaschinen Hohmann, H.J. | Journal Article |
1989 | DSC-Analytik. Qualitätsbeurteilung und Prozeßoptimierung Behlau, L. | Journal Article |
1988 | Experiments with liquid gun propellants. Knapton, J.D.; Watson, C.; Stobie, I.C.; Klingenberg, G. | Journal Article |
1988 | Mechanical behaviour of some metals under dynamic loading Meyer, L.W.; Staskewitsch, E. | Conference Paper |
1988 | Temperature and velocity measurements in reacting flows Klingenberg, G. | Conference Paper |
1987 | Formation of p+(p-)n junctions in InP and their dependence on substrate concentration, time and temperature Schmitt, F.; Mahnkopfe, M. | Conference Paper, Journal Article |
1987 | Solar cycle and long-period variations of mesospheric temperatures Cossart, G. von; Taubenheim, J. | Journal Article |
1986 | Some temporal characteristics of the atmospheric radio noise on 27 kHz at the Kuhlungsborn Observatory during the period 1952-83 Schaning, B. | Journal Article |
1986 | Technological Aspects of Viscosity Kreidl, N.J.; Scholze, H. | Book Article |