Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Modeling of spontaneous transformation of nitrides to Z phase accounting for stress relaxation by diffusion and interface activity
Svoboda, J.; Riedel, H.
Journal Article
2019Nondestructive Testing with 3MA - An Overview of Principles and Applications
Wolter, Bernd; Gabi, Yasmine; Conrad, Christian
Journal Article
2018Perspectives for digitising energy-intensive industries - findings from the European iron and steel industry
Arens, Marlene; Neef, Christoph; Beckert, Bernd; Hirzel, Simon
Conference Paper
2018A review of mathematical programming in integrated iron‐ and steelmaking
Beek, Mathias van
Journal Article
2017Development and validation of a new method for accelerated and economic wear testing of tool materials for deep drawing applications
Behrens, B.-A.; Bräuer, G.; Hübner, S.; Weber, M.; Lorenz, E.; Zimbelmann, S.; Jalanesh, M.
Journal Article
2017Mimicking lizard-like surface structures upon ultrashort laser pulse irradiation of inorganic materials
Hermens, Ulrike; Kirner, Sabrina V.; Emonts, Caroline; Comanns, Philipp; Skoulas, Evangelos; Mimidis, A.; Mescheder, Holger; Winands, Kai; Krüger, Jörg; Stratakis, Emmanuel; Bonse, Jörn
Journal Article
2016The influence of the initial near-surface microstructure and imposed stress level on the running-in characteristics of lubricated steel contacts
Brink, A.; Lichtenberg, K.; Scherge, M.
Journal Article
2016Nanoscratching meets nanoindentation
Shakhverdova, Irina P.; Reibold, Marianne; Kochmann, Werner; Paufler, Peter
Journal Article
2016Workpiece positioning during magnetic pulse welding of aluminum-steel joints
Lorenz, Amanda Leigh; Lueg-Althoff, Jörn; Bellmann, Jörg; Göbel, Gunther; Gies, Soeren; Weddeling, Christian; Beyer, Eckhard; Tekkaya, A. Erman
Journal Article
2015A constitutive model for the simulation of the deformation behavior of TWIP steels
Haufe, A.; Erhart, A.; Butz, A.
Conference Paper
2015Fatigue life and cyclic material behavior of butt-welded high-strength steels in the LCF regime
Möller, Benjamin; Wagener, Rainer; Kaufmann, Heinz; Melz, Tobias
Journal Article
2015Investigation on joint characteristics of laser beam welded press hardenable ultra-high strength steels with ferritic-martensitic and martensitic microstructure
Janzen, V.; Meschut, G.; Dahmen, M.; Poprawe, R.; Lindner, S.; Wagener, Rainer; Melz, Tobias
Journal Article
2015Non-destructive stress determination of steel elements in pre-stressed constructions using micromagnetic and ultrasound methods
Kurz, Jochen Horst; Szielasko, Klaus; Tschuncky, Ralf
Conference Paper
2015Some background of monitoring and NDT also useful for timber structures
Kurz, Jochen Horst; Boller, Christian
Journal Article
2015Visualization of bulk magnetic properties by neutron grating interferometry
Betz, Benedikt; Rauscher, Peter; Siebert, René; Schäfer, Rudolf; Kästner, A.; Swygenhoven, H. van; Lehmann, E.; Grünzweig, C.
Journal Article, Conference Paper
2014Cyclic material behaviour of welded ultra high-strength steels
Möller, Benjamin; Wagener, Rainer; Melz, Tobias
Conference Paper
2014Development of a double beam process for joining aluminum and steel
Frank, S.
Conference Paper
2014Examination of micro- and nanostructures of magnetic and piezoelectric materials in relation to their macroscopic properties by dynamic scanning force microscopy techniques
Batista, Leonardo
Dissertation
2014Microstructure and residual stresses of laser structured surfaces
Preußner, J.; Oeser, S.; Pfeiffer, W.; Temmler, A.; Willenborg, E.
Conference Paper
2014On the mechanism of nondestructive evaluation of cementite content in steels using a combination of magnetic Barkhausen noise and magnetic force microscopy techniques
Batista, Leonardo; Rabe, Ute; Altpeter, Iris; Hirsekorn, Sigrun; Dobmann, Gerd
Journal Article
2014Residual formability of preformed and subsequently welded advanced high strength steels (Reform)
Standfuß, Jens; Jahn, Axel; Weber, P.; Neges, J.; Wischmann, S.; Höfemann, M.; Sierlinger, R.; Cretteur, L.; Veldt, T. van der; Veit, R.; Trattnig, G.; Pickett, A.; D'Aiuto, F.
Report
2013Characterization of the magnetic micro- and nanostructure in unalloyed steels by magnetic force microscopy
Batista, Leonardo; Rabe, Ute; Hirsekorn, Sigrun
Conference Paper
2013Fatigue life approach method for welded high-strength fine-grained steels in the LCF regime
Möller, Benjamin; Wagener, Rainer; Kaufmann, Heinz; Hanselka, Holger; Hrabowski, J.; Herion, Stefan; Ummenhofer, T.
Conference Paper
2013Highly resolved analysis of the chemistry and mechanical properties of an a-C:H coating system by nanoindentation and auger electron spectroscopy
Schmid, C.; Maier, V.; Schaufler, J.; Butz, B.; Spiecker, E.; Meier, S.; Göken, M.; Durst, K.
Conference Paper, Journal Article
2013Magnetic micro- and nanostructures of unalloyed steels: Domain wall interactions with cementite precipitates observed by MFM
Batista, Leonardo; Rabe, Ute; Hirsekorn, Sigrun
Journal Article
2013Running-in due to material transfer of lubricated steel/PA46 (aliphatic polyamide) contacts
Scherge, M.; Kramlich, J.; Böttcher, R.; Hoppe, T.
Journal Article
2013Ultralow friction induced by tribochemical reactions: A novel mechanism of lubrication on steel surfaces
Li, K.; Amann, T.; Walter, M.; Moseler, M.; Kailer, A.; Rühe, J.
Journal Article
2011Design methods for reliable fatigue assessment of PM components
Baumgartner, Jörg; Lipp, Klaus; Bruder, Thomas; Kaufmann, Heinz
Journal Article
2011Influence of manganese sulfide inclusions on fatigue properties of AFP steels
Exel, N.; Kaufmann, H.
Conference Paper
2011Interpretation of overload effects under spectrum loading of welded high-strength steel joints
Sonsino, Cetin Morris; Kaufmann, Heinz; Wagener, Rainer; Fischer, Christian; Eufinger, Jens
Journal Article
2011Overload effects on a ferritic-baintic steel and a cast aluminium alloy: Two very different behaviours
Saintier, N.; Palin-Luc, T.; Bidonard, H.; Dsoki, Chalid el; Kaufmann, Heinz; Dumas, Christian; Völlmecke, F.J.; Sonsino, Cetin Morris
Journal Article
2011Overload effects on a ferritic-baintic steel and a cast aluminium alloy: Two very different behaviours
Sonsino, Cetin Morris; Kaufmann, Heinz; Palin-Luc, T.; Saintier, N.; Dsoki, Chalid el; Dumas, Christian; Völlmecke, F.J.
Conference Paper
2011Reliability aspects in fatigue design of welded structures using selected local approaches
Sonsino, Cetin Morris
Book Article
2010Cyclic material behaviour of a 4% Ni diffusion-alloyed and a 1.5%Mo prealloyed sintered steel
Wagener, Rainer; Lipp, Klaus; Kaufmann, Heinz
Conference Paper
2010Fatigue behaviour of laserbeam welded thin steel and aluminium sheets unter multiaxial loading
Wiebesiek, J.; Störzel, K.; Bruder, T.; Kaufmann, H.
Conference Paper
2010Forming technologies in automotive industry by aplying lightweight materials
Schieck, F.; Paul, A.; Pröhl, M.
Conference Paper
2010Microelectrochemical investigation on aluminium-steel friction welds
Schneider, M.-E.; Langklotz, U.; Michaelis, A.; Arnold, B.
Journal Article
2010Multiaxial fatigue life assessment of components of forged steel Ck 45 (SAE 1045) and of sintered steel Fe-1.5Cu by integration of damage differentials (IDD)
Sonsino, C.M.; Stefanov, S.H.
Conference Paper
2009BETOSCAN - an instrumented mobile robot system for the diagnosis of reinforced concrete floors
Reichling, K.; Raupach, M.; Wiggenhauser, H.; Stoppel, M.; Dobmann, G.; Kurz, J.H.
Journal Article
2009BETOSCAN - An instrumented mobile robot system for the diagnosis of reinforced concrete floors
Raupach, M.; Reichling, K.; Wiggenhauser, H.; Stoppel, M.; Dobmann, G.; Kurz, J.
Conference Paper
2009Comparison of overload effects under variable amplitude loading on a steel sheet and a cast aluminium alloy
Bidouard, H.; Saintier, N.; Palin-Luc, T.; Dumas, C.; Dsoki, C. el; Kaufmann, H.; Sonsino, C.M.; Völlmecke, F.J.
Conference Paper
2009Effect of residual stresses on the fatigue behaviour of welded joints depending on loading conditions and weld geometry
Sonsino, C.M.
Conference Paper, Journal Article
2009Multiaxial fatigue assessment of welded joints - recommendations for design codes
Sonsino, C.M.
Conference Paper, Journal Article
2009Notch stress concept variants - application examples for thin and thick welded steel joints
Sonsino, C.M.; Fricke, H.; Bruyne, F. de; Hoppe, A.; Ahmade, A.; Zhang, G.
Conference Paper
2008Effects of LCF on the HCF life of notched specimen in ferritic-bainitic steel
Biduard, H.; Palin-Luc, T.; Saintier, N.; Dumas, C.; Dsoki, C. el; Kaufmann, H.; Sonsino, C.M.
Conference Paper
2008High-strength steels in welded state for light-weight constructions under high and variable stress peaks
Kaufmann, H.; Sonsino, C.M.; Demofonti, G.; Riscifuli, S.
Journal Article
2008Material behavior of steel - Modeling of complex phenomena and thermodynamic consistency
Wolff, M.; Böhm, M.; Helm, D.
Journal Article
2007Compatibility and cyclic properties of linear flow splitted steel
Dsoki, C. el; Nieslony, A.; Kaufmann, H.
Conference Paper
2007Course of SN-curves especially in the high-cycle fatigue regime with regard to component design and safety
Sonsino, C.M.
Journal Article
2007Hot Metal Gas Forming (HMGF) of boron-manganese steel tubes
Alcelay Ugarte, X.
Thesis
2007Werkstofftrends: Biowerkstoffe
Reschke, S.; Kohlhoff, J.; Grüne, M.; Notthoff, C.
Journal Article
2006Detection of small inclusions in thin steel sheets by magnetic flux leakage technique
Yashan, A.; Becker, R.; Klein, A.
Conference Paper
2006Fatigue design of aluminium welded joints by the local stress concept with the fictious notch radius of r(f)=1 mm
Morgenstern, C.; Sonsino, C.M; Hobbacher, A.; Sorbo, F.
Journal Article
2006Fatigue design principles for sintered steel components
Sonsino, C.M.
Journal Article
2006Fatigue design related aspects of the woehler-Linie according to the state of the art
Sonsino, C.M.
Conference Paper
2006Grundlagenuntersuchungen zum neuen Fügeverfahren matrizenloses Nietclinchen mit überlagerter Bewegung
Neugebauer, Reimund; Dietrich, S.
Report
2006Nietclinchen - ein neues Fügeverfahren für die Karosseriefertigung
Neugebauer, Reimund; Dietrich, S.; Mauermann, R.
Conference Paper
2006Some remarks for improving the assessment of multiaxial stress state and multiaxial spectrum loading in the IIW-fatigue design recommendation
Sonsino, C.M.; Fricke, W.
Report
2005Chances and challenges in joining by forming with a flat counter tool
Neugebauer, Reimund; Dietrich, S.; Mauermann, R.
Conference Paper
2005High-strength steels in welded state for light-weight constructions under high and variable stress peaks
Kaufmann, H.; Sonsino, C.M; Demofonti, G.; Riscifuli, S.
Conference Paper
2005Light-weight design chances using high-strength steels
Sonsino, Cetin Morris
Conference Paper
2005New developments in bulk forming of power train components of enhanced performance characteristics
Lorenz, B.; Glass, R.; Hartwig, H.
Conference Paper
2005Structural durability- a controversal research field of current interest
Hanselka, H.
Conference Paper
2004Clinchnieten und Nietclinchen
Haller, J.; Dietrich, S.
Conference Paper
2004Cumulative damage of laserbeam welded thin automotive hollow structures of steel and aluminium
Sonsino, C.M.
Conference Paper
2004Improvement of materials and tools for thixoforming of steels
Rassili, A.; Adam, L.; Fischer, D.; Robelet, M.; Demurger, J.; Cucatto, A.; Klemm, H.; Walkin, B.; Karlsson, M.; Flüß, A.
Conference Paper
2003Betriebsfestigkeit von laserstrahlgeschweißten Leichtbaustrukturen aus Stahl und Aluminium am Beispiel von Hutprofilen
Sonsino, C.M.; Hanselka, H.; Kaufmann, H.
Conference Paper
2003Dynamic magnetostriction for material characterization of micro structure states of degraded structural steel
Pirfo, S.; Szielasko, K.; Altpeter, I.; Dobmann, G.
Conference Paper
2003Entwicklungsfortschritte beim matrizenlosen Clinchen und Nietclinchen
Mauermann, R.; Dietrich, S.
Conference Paper
2003Investigations and applications of laser-arc hybrid welding with the "integrated nozzle"
Petring, D.; Fuhrmann, C.; Wolf, N.; Poprawe, R.
Conference Paper
2003Non-destructive prediction of material properties of steel and Al-alloys - state and challenge
Schneider, E.; Dobmann, G.; Theiner, W.
Conference Paper
2003Weniger ist oft mehr - Clinchen ohne Matrize
Voelkner, W.; Dietrich, S.; Mauermann, R.
Journal Article
2002Fatigue assessment of laser welded overlap joints with local approaches
Eibl, M.; Sonsino, C.M.
Conference Paper
2002Service improvement of high-strength formed sheet steel structures "Bodylife"
Wallmichrath, M.; Reip, C.-P.; Budano, S.; Riscifuli, S.
Report
2002Welded steel and aluminum joints under multiaxial and random loading
Sonsino, C.M.; Küppers, M.
Conference Paper
2001Copper precipitates in 15 NiCuMoNb 5 (WB 36) steel: Material properties and microstructure, atomistic simulation and micromagnetic NDE techniques
Altpeter, I.; Dobmann, G.; Katerbau, K.-H.; Schick, M.; Binkele, P.; Kizler, P.; Schmauder, S.
Journal Article
2001Erweitertes Anwendungsspektrum des Laserstrahlschweißens durch Laser-MIG-Hybridtechnik
Petring, D.; Kaierle, S.; Dahmen, M.; Kasimir, M.; Cottone, F.; Maier, C.
Journal Article
2001Fatigue crack growth of a welded tube-flange connection under bending and torsional loading
Amstutz, H.; Störzel, K.; Seeger, T.
Journal Article
2001High-strength steels in welded state for lightweight constructions under high and variable stress peaks
Demofonti, G.; Riscifuli, S.; Sonsino, C.M.; Kaufmann, H.; Sedlacek, G.; Müller, C.; Hanus, F.; Wegmann, H.G.
Book
2001Multiaxial fatigue of welded joints under constant and variable amplitude loadings
Sonsino, C.M.; Küppers, M.
Journal Article
2001Werkstofftrends: Stähle
Kohlhoff, J.; Reschke, S.; Kretschmer, T.
Journal Article
2000Cost reduction by using new Ni-free PM steels
Lipp, K.; Bas, J.; Blanchard, C.; Johansson, M.; Baum, U.
Conference Paper
2000Electromagnetic and micro-magnetic non-destructive characterization (NDC) for material mechanical property determination and prediction in steel industry and in lifetime extension strategies of NPP steel components
Dobmann, G.; Altpeter, I.; Becker, R.; Lang, M.; Kern, R.; Yashan, A.; Theiner, W.
Journal Article
2000Material Recycling. Environmentally and Economically Efficient Cycles
Braunmiller, U.; Wörle, G.
Book
2000Positron Annihilation Studies of a Pressure Vessel Steel
Dobmann, G.; Surkov, A.; Depetasse, S.; Sklarczyk, C.
Conference Paper
2000Stages and character scales of fractal mesostructure formation under tensile loading of austenite stainless steel
Kuznetsov, P.V.; Panin, V.E.; Levin, K.V.; Lipnitskii, A.G.; Schreiber, J.
Journal Article
2000Steel analysis with laser-induced breakdown spectrometry in the vacuum ultraviolet
Sturm, V.; Peter, L.; Noll, R.
Journal Article
2000Ultrasonic assisted diamond turning of steel and glass
Klocke, F.; Rübenach, O.
Conference Paper
2000Ultrasonic Methods to Detect and Evaluate Damage in Steel
Hirsekorn, S.; Andel, P.W. van; Netzelmann, U.
Journal Article
2000Ultrasonic-assisted diamond turning of glass and steel
Klocke, F.; Rübenach, O.
Journal Article
1999Bruchverhalten von angerissenen Bauteilen unter schlagartiger und schwingender Belastung
Fischer, G.; Sonsino, C.M.
Book
1999Chemical vapour deposition of polycrystalline diamond films on high-speed steel
Schäfer, L.; Fryda, M.; Stolley, T.; Xiang, L.; Klages, C.-P.
Journal Article
1999Fatigue Behaviour of Welded Medium and High Strength Steels
Sonsino, C.M.; Kaufmann, H.; Budano, S.; Demfonti, G.; Hanus, F.; Wegmann, H.; Sedlacek, G.; Müller, C.
Book
1999Fatigue design data for welded stainless steels
Maddox, S.J.; Branco, C.; Sonsino, C.M.; Manteghi, S.; Küppers, M.; Infante, V.
Book
1999Keramik- und Stahlventile des PKW-Motorenbaus im Vergleich
Brandt, U.; Reinheimer, G.; Mörgenthaler, K.
Conference Paper
1999Multi-elemental analysis of low-alloyed steel by laser-induced breakdown spectrometry
Peter, L.; Sturm, V.; Noll, R.; Hakala, R.; Viirret, J.; Overkamp, B.; Koke, P.
Conference Paper
1999Quality assurance in the production of pipe fittings by automatic laser based material identification
Mönch, I.; Peter, L.; Priem, R.; Sturm, V.; Noll, R.
Conference Paper
1999Schwingfestigkeit induktionsgehärteter Bauteile aus AFP-Stählen
Kaufmann, H.; Sonsino, C.M.
Journal Article
1998CVD-Diamantbeschichtung von Stahl
Schäfer, L.
Book Article
1998Design criteria and durability approval of wheel hubs
Fischer, G.; Grubisic, V.
Report
1998Fatigue design and testing of components
Sonsino, C.M.
Conference Paper
1998Fatigue design and testing of components
Sonsino, C.M.
Conference Paper
1998Fatigue design. Testing, quality reliability and safety on the example of automotive PM' components
Sonsino, C.M.
Conference Paper
1998Hybrid design concept using high-strength cast steel inserts for tubular joints of offshore structures2
Sonsino, C.M.; Umbach, R.
Journal Article
1998Influence of load- and deformation-controlled multiaxial tests on fatigue life of crack initiation
Sonsino, C.M.
Conference Paper
1998Laser cladding using high-power diode lasers
Nowotny, S.; Richter, A.; Beyer, E.
Conference Paper
1998Study of Residual Stresses in a Stainless Steel Tube with a Welded Ferritic Cover by Neutron Diffraction
Taran, Y.; Kockelmann, H.; Schreiber, J.; Wright, J.
Conference Paper
1997Hochverschleißfeste Schichten auf Stahl und Titan
Techel, A.; Nowotny, S.
Conference Paper
1997Maßgeschneiderte Oberflächen durch Laserstrahl-Oberflächenbehandlung mit Zusatzwerkstoffen: Eine Übersicht
Gasser, A.; Backes, G.; Wissenbach, K.; Hoffmann, E.; Poprawe, R.
Journal Article
1997On-line surface inspection with fuzzy-ASIC modules
Meier, A.; Priber, U.; Müller, D.; Schlegel, P.; Eichhorn, K.
Conference Paper
1997Superharte Schichten für extreme Anforderungen
Prasse, H.; Bewilogua, K.; Schäfer, L.
Journal Article
1997Transferability of material data for the example of a randomly loaded forged truck stub axle
Sonsino, C.M.; Kaufmann, H.; Grubisic, V.
Journal Article
1997Transferability of material data for the example of a randomly loaded forged truck stub axle
Sonsino, C.M.; Kaufmann, H.; Grubisic, V.
Report
1996Development of high-strength cast steel for the design of optimised light weight hybrid constructions
Müller, F.; Engels, A.; Weiss, B.; Chen, D.L.; Stickler, R.; Sonsino, C.M.
Conference Paper
1996Development of high-strength P/M steels with optimized microstructure by new alloying and sintering techniques
Brandt, U.; Sonsino, C.M.; Engström, U.; Ernst, E.; Hoffmann, E.
Conference Paper
1996Ermittlung lokaler Eigenspannungszustände in Rißspitzenumgebung mit Hilfe der Barkhausen-Mikroskopie und röntgenographischer Methoden
Blumenauer, H.; Horn, D.; Altpeter, I.; Krempe, M.
Conference Paper
1996Fatigue life of welded stainless steels
Sonsino, C.M.; Müller, F.; Hölscher, M.; Krautschick, J.; Schmitz, K.; Uhlig, G.; Behr, F.; Körber, C.
Conference Paper
1996Festigkeit von Schweißverbindungen unter kombinierter Beanpruchung
Sonsino, C.M.
Journal Article
1996Geklebte Preßverbände für hochdynamische Antriebssysteme
Tersch, H.
Conference Paper
1996Hybrid design concept using high-strength cast steel inserts for tubular joints of offshore structures
Sonsino, C.M.; Umbach, R.
Conference Paper
1996Inverse hardness distribution and its influence on mechanical properties
Liscic, B.; Grubisic, V.; Totten, G.E.
Conference Paper
1996On-line Messung von Werkstoffeigenschaften an kaltgewalztem Feinblech im Rahmen eines Pilotvorhabens
Theiner, W.; Thoma, C.; Borsutzki, M.
Conference Paper
1996Optimale Verfahrensparameter beim induktiven Randschichthärten durch rechnerische Simulation
Störzel, K.; Kaufmann, H.
Conference Paper
1996Stress analysis using an area detector
Schubert, A.; Michel, B.; Kämpfe, B.
Conference Paper
1995Application of impendance methods for corrosion protecting properties of coated substrates in metal packaging
Hollaender, J.; Brandsch, R.
Conference Paper
1995Betriebsfestigkeit von torsionsbelasteten Wellen für Automatgetriebe
Foth, J.; Jauch, F.; Sonsino, C.M.; Kaufmann, H.
Conference Paper
1995Chemical vapour deposition of polycrystalline diamond films on steel substrates
Schäfer, L.; Bluhm, A.; Sattler, M.; Six, R.; Klages, C.-P.
Conference Paper
1995Herstellung und Eigenschaften von mit Laser erzeugten TiC- und TiB2-Dispersionsschichten auf Stahl und Aluminiumlegierungen
Fischer, D.; Löschau, W.
Conference Paper
1995Schwingfestigkeit von hochfesten Feinkornbaustählen im brenngeschnittenen Zustand
Kaufmann, H.; Sonsino, C.M.; Schönherr, W.
Journal Article
1995Schwingfestigkeit von Schmiedestahl und höherfesten Eisen-Graphit-Gußwerkstoffen im gekerbten Zustand
Kaufmann, H.
Book
1995Sicherstellung des Einsatzes von Stahl in Offshore-Bauwerken größerer Tiefe durch Erprobung von höherfesten Rohrknoten-Hybrid-Konstruktionen in bauteilähnlichem Maßstab
Christianus, D.; Engels, A.; Fischer, W.; Floßdorf, F.-J.; Freier, K.; Hansen, H.-J.; Kußmaul, T.; Lachmann, E.; Lipp, K.; Müsgen, B.; Schriever, U.; Schütz, W.; Seifert, K.; Sonsino, C.M.; Strewinski, R.; Umbach, R.
Book
1995Verwendung von Kohlenstoffasern zur Leistungssteigerung von Industriezentrifugen
Götte, T.; Idelberger, H.; Garbe, J.; Hochbein, H.
Journal Article
1994Application of force sensors in microprocessor-controlled actuators
Feil, M.; Partsch, J.
Conference Paper
1994Einfluß von Härtungsparametern auf die Schwingfestigkeit von Gesenkschmiedeteilen
Kaufmann, H.; Ziemann, M.; Klemz, R.; Sonsino, C.M.
Journal Article
1994Fatigue design for PM components. Manual for design and production engineers.
Esper, F.J.; Sonsino, C.M.
Book
1994Material characterization by contactless measurement of ultrasonic absorption using laser ultrasound
Haberer, B.; Paul, M.; Willems, H.; Arnold, W.
Conference Paper
1994Schwingfestigkeit lasergeschweißter Verbindungen.
Sonsino, C.M.; Müller, F.
Book Article
1994Verbesserung der Bauteilfestgkeit durch höherfeste Feinblechwerkstoffe und optimierte Fügeverfahren
Grubisic, V.; Beenken, H.; Biswas, K.; Bork, C.P.; Drewes, E.J.; Engl, B.; Hunecke, J.; Rupp, A.; Schmid, G.; Singh, S.
Conference Paper
1993Adhesive bonding of oiled steel in the automotive industry
Hennemann, O.-D.; Groß, A.; Schäfer, H.; Baalmann, A.
Conference Paper
1993Application of X-ray diffraction to studies of high temperature corrosion of iron
Juez-Lorenzo, M.; Kolarik, V.; Eisenreich, N.; Engel, W.; Criado, A.J.
Conference Paper
1993Neuentwicklungen beim Kleben von Stahl und Maschinenteilen
Groß, A.; Hennemann, O.-D.; Lüschen, R.
Journal Article
1993On the Ballistic Resistance of Laminated Steel Targets. Experiments and Numerical Calculations
Weidemaier, P.; Senf, H.; Rothenhäusler, H.; Filbey, G.L.; Gooch, W.A.
Conference Paper
1993Propagation of ultrasonic plane waves in a plastically deformed medium
Ravi-Chandar, K.; Schneider, E.
Conference Paper
1993Schwingfestigkeit von hochfesten Feinkornbaustählen im brenngeschnittenen Zustand. Forschungsbericht.
Sonsino, C.M.; Kaufmann, H.; Müller, F.; Berghöfer, U.
Book
1993Zur Steigerung der Betriebsfestigkeit zufallsartig wechselbiegebelasteter Kerbstäbe aus Stahl durch Oberflächennachbehandlung.
Oppermann, H.
Book
1992Das Bruchverhalten von Fahrwerkskomponenten. Tl.1. Werkstoffeinfluß
Fischer, G.; Grubisic, V.; Sonsino, C.M.
Journal Article
1992Das Bruchverhalten von Fahrwerkskomponenten. Tl.2. Einfluß der Konstruktion
Fischer, G.; Grubisic, V.; Sonsino, C.M.
Journal Article
1992Einfluß von Härtungsparametern auf die Schwingfestigkeit von Gesenkschmiedeteilen
Kaufmann, H.; Sonsino, C.M.; Wetter, E.
Journal Article
1992Einfluß von Induktiv-Härtungsparametern auf die Schwingfestigkeit von Gesenkschmiedeteilen
Kaufmann, H.
Book
1992Ergebnisse bei der Entwicklung der Positronenannihilation als Methode zur zerstörungsfreien Werkstoffprüfung
Somieski, B.; Salz, H.; Anhofer, T.; Krause, R.; Meyendorf, N.
Conference Paper
1992The influence of fretting corrosion on fatigue strength of nodular cast iron and steel under constant amplitude and load spectrum tests.
Buxbaum, O.; Fischer, G.; Grubisic, V.
Book Article
1992Kleben von Stahlblech - Chemische Untersuchungen
Kollek, H.; Lüschen, R.; Preußner, E.
Book Article
1992Kleben von Stahlblech - Langzeitverhalten
Kötting, G.; Kollek, H.
Book Article
1992Reactive TiN deposition on alloys with laser radiation
Kreutz, E.W.; Krösche, M.; Sung, H.; Voss, A.; Wissenbach, K.
Journal Article
1992Reduction of friction and wear by ion-implanted carbonized photoresit
Bogen, S.; Gyulai, J.; Kluge, A.; Öchsner, R.; Ryssel, H.
Conference Paper
1992Reduction of friction and wear by ion-implanted carbonized photoresit
Bogen, S.; Gyulai, J.; Kluge, A.; Öchsner, R.; Ryssel, H.
Conference Paper
1992Schwingfeste Bauteilbemessung mit höherfesten Stählen. Tl.1. Hinweise zu Konstruktion und Bemessung
Hanewinckel, D.; Sonsino, C.M.
Journal Article
1992Schwingfeste Bauteilbemessung mit höherfesten Stählen. Tl.2. Schwingfestigkeitskennwerte
Hanewinckel, D.; Sonsino, C.M.
Journal Article
1991Anrissermittlung mit dem Gleichstrom-Potentialsonden-Verfahren
Müller, F.
Book
1991Effect of loading sequence on the fatigue life of notched specimens made from steel and aluminium alloys
Buxbaum, O.; Klätschke, H.; Oppermann, H.
Journal Article
1991Lasergestützte Stoffanalyse für die on-line Prüfung von Oberflächenschichten
Noll, R.; Sattmann, R.
Conference Paper
1991Mehrachsig schwingbeanspruchte Schweißverbindungen. Hypothesen - Regelwerke - Experimentelle Untersuchungen
Sonsino, C.M.
Conference Paper
1991Study of non-isothermal oxidation kinetics using a fast X-ray diffraction method
Eisenreich, N.; Engel, W.; Juez-Lorenzo, M.; Kolarik, V.
Conference Paper
1990Evaluation of different heat treatment methods for fatigue design of notched and differently loaded PM' parts
Esper, F.J.; Sonsino, C.M.
Conference Paper
1990Fatigue strength of materials and structures under operational stresses
Grubisic, V.
Conference Paper
1990Influence of As-sintered material strength on the improvement of fatigue behaviour by surface rolling
Tengzelius, J.; Schlieper, G.; Sonsino, C.M.
Conference Paper
1990Quantitative nondestructive evaluation of cementite in steel and white cast iron by ferromagnetic parameters
Altpeter, I.; Höller, P.
Conference Paper
1990Schwingfestigkeit wetterfester Baustähle
Müller, F.; Sonsino, C.M.
Book
1990Standardisierung von Lastfolgen und Verbesserung der Lebensdauervorhersage für Bauteile in Walzwerksantrieben
Brune, M.; Eifler, D.; Heuler, P.; Ungerer, W.; Zenner, H.; Schütz, D.; Schütz, W.
Book
1990Temperature dependence of third order elastic constants
Mohrbacher, H.; Goebbels, K.; Schneider, E.
Conference Paper
1989Beschichten mit Co2-Laserstrahlung
Gasser, A.; Kreutz, E.W.; Wissenbach, K.
Conference Paper
1989Ultrasonic attenuation measurement using backscattering technique
Goebbels, K.; Willems, H.
Conference Paper
1989Zum Einfluß der Belastungsreihenfolge auf die Lebensdauer von Kerbstäben aus Stahl und Aluminium
Buxbaum, O.; Klätschke, H.; Oppermann, H.
Report
1988Characterization of hardening depth by Barkhausen noise measurement
Bach, G.; Goebbels, K.; Theiner, W.A.
Journal Article
1988Der Einfluß des Kohlenstoffgehalts und der Korngröße auf die Energieaufnahme bei adiabatischer Scherverformung
Scholz, B.; Pintat, T.; Kunze, H.-D.; Vöhringer, O.
Conference Paper
1987Früherkennung von Kriechschädigung mittels Ultraschall-Verfahren
Willems, H.
Conference Paper
1987The influence of high-temperature creep on the ultrasonic velocity in alloy 800H
Willems, H.
Conference Paper
1987A new method for the measurement of ultrasonic absorption in polychristalline materials
Willems, H.
Conference Paper
1985A novel procedure for measuring the impact fracture toughness K
Kalthoff, J.F.; Winkler, S.; Böhme, W.
Journal Article
1984Dynamic behaviour of thermomechanically treated ultra high strength steel under tensile and compressive loading
Meyer, L.W.
Conference Paper