| | |
|---|
| 2019 | Accounting for laser beam characteristics in the design of freeform optics for laser material processing
Völl, Annika; Wester, Rolf; Berens, Michael; Buske, Paul; Stollenwerk, Jochen; Loosen, Peter | Journal Article |
| 2019 | Bearbeitung komplexer Großbauteile mit mobilen Werkzeugmaschinen
Rentzsch, Hendrik; Witt, Susanne; Schwenke, Heinrich | Journal Article |
| 2019 | Development of a Friction Welded Joint for Future Industrial Application
Schubert, Nadine; Sterzing, Andreas; Mauermann, Reinhard; Hilbers, Sören; Kolbe, Peter; Kuhn, Christian | Conference Paper |
| 2019 | Echtzeitnahe Simulation mit in-situ Visualisierung
Bruns, Axel; Schlegel, Thilo; Lickefett, Michael; Siegert, Jörg | Journal Article |
| 2019 | Evaluation Methodology for Cooperative ADAS Utilizing Simulation and Experiments
Bittl, Sebastian; Seydel, Dominique; Pfeiffer, Jakob; Jiru, Josef | Conference Paper |
| 2019 | Go-3D 2019. Mit 3D Richtung Maritim 4.0
: Lukas, Uwe von; Bauer, Kristine; Dolereit, Tim; Flach, Guntram | Conference Proceedings |
| 2019 | Investigation of the temperature dependence of lithium plating onset conditions in commercial Li-ion batteries
Angeles Cabañero, Maria; Altmann, Johannes; Gold, Lukas; Boaretto, Nicola; Müller, Jana; Hein, Simon; Zausch, Jochen; Kallo, Josef; Latz, Arnulf | Journal Article |
| 2019 | Large-Area Layer Counting of Two-Dimensional Materials Evaluating the Wavelength Shift in Visible-Reflectance Spectroscopy
Hutzler, Andreas; Matthus, Christian D.; Dolle, Christian; Rommel, Mathias; Jank, Michael P.M.; Spiecker, Erdmann; Frey, Lothar | Journal Article |
| 2019 | Load and energy management for factories through multi-stage production planning and optimization
Süße, Marian; Prell, Bastian; Stoldt, Johannes; Strehle, Hanns-Martin; Richter, Mark; Schlegel, Andreas; Putz, Matthias | Journal Article, Conference Paper |
| 2019 | Methodik zur Gestaltung und Evaluierung der Software-Gebrauchstauglichkeit bei der ersten oder bei seltener Anwendung
Lange, Olga | Dissertation |
| 2019 | Modelling and simulation of low-temperature district heating systems for the development of an exergy-based assessment method
Kallert, Anna Marie Dagmar
: Wagner, U.; Björk, F. | Dissertation |
| 2019 | Modelling cascaded caloric refrigeration systems that are based on thermal diodes or switches
Hess, Tobias; Maier, Lena Maria; Corhan, Patrick; Schäfer-Welsen, Olaf; Wöllenstein, Jürgen; Bartholomé, Kilian | Journal Article |
| 2019 | Navigation 4.0. Vernetzung als Werkzeug zur kollektiven Optimierung
Pfeiffer, Kai | Conference Paper |
| 2019 | Numerical and experimental investigations for hot metal gas forming of stainless steel X2CrTiNb18
Reuther, Franz; Mosel, Andre; Freytag, Peter; Lambarri, Jon; Degenkolb, Lars; Werner, M.; Winter, S. | Journal Article, Conference Paper |
| 2019 | Simulation of Sintering across Scales
Raether, Friedrich; Seifert, Gerhard; Ziebold, Heiko | Journal Article |
| 2019 | Simulation-Assisted Decision Making for Supply Chain Disruptions in Production Control
Schlereth, Andreas; Ponsignon, Thomas; Bruns, Axel; Bauer, Dennis; Maier, Florian | Conference Paper, Presentation |
| 2019 | Simulationsgestützte Effizienzoptimierung von industriellen Kaltwassersystemen mit thermischen Speichern
Puls, Philipp
: Pichler, Peter; Müller, Karsten | Dissertation |
| 2019 | Systemdynamik-Ansätze zur Optimierung der PPS
Bauer, Dennis; Schlereth, Andreas; Bauernhansl, Thomas | Journal Article |
| 2019 | Temperature calculation in metal substrates during two-photon polymerization
Harnisch, Emely; Venek, Tommy; Nohr, Svenja; König, Niels; Schmitt, Robert | Journal Article |
| 2019 | Towards a Virtual Continuous Integration Platform for Advanced Driving Assistance Systems
Bachorek, Adam; Schulte-Langforth, Felix; Witton, Alexander; Kuhn, Thomas; Antonino, Pablo Oliveira | Conference Paper |
| 2019 | Towards understanding the mechanism of fibrous texture formation during high-moisture extrusion of meat substitutes
Sandoval Murillo, José Luis; Osen, Raffael; Hiermaier, Stefan; Ganzenmüller, Georg | Journal Article |
| 2018 | "Simulationen trainieren das maschinelle Lernen"
| Journal Article |
| 2018 | Apparent Field-Dependence of the Charge Carrier Generation in Organic Solar Cells as a Result of (Bimolecular) Recombination
Würfel, U.; Unmüssig, M. | Journal Article |
| 2018 | Applying energy building simulation in the assessment of energy efficiency measures in factories
Weeber, Max; Ghisi, Enedir; Sauer, Alexander | Journal Article, Conference Paper |
| 2018 | Approach to evaluating and planning industrial laundries by using discrete event simulation and performance measurement system
Weigert, David; Ryll, Frank; Müller, Marcel | Conference Paper |
| 2018 | Die Autoindustrie simuliert die Produktion der Zukunft
Schwede, Christian; Novak, Axel | Journal Article |
| 2018 | Auxetic aluminum sheets in lightweight structures
Ripplinger, Wolfgang; Schwarz, Michael; Diebels, Stefan; Herrmann, Hans-Georg | Journal Article |
| 2018 | Bessere Werkstoffsimulation für Steckverbinder. Analyse und Bewertung des mechanischen Verhaltens von Kupferbauteilen mithilfe von FE-Simulation
Weber, Matthias; Helm, Dirk | Journal Article |
| 2018 | Betriebsdatenbasierte automatische Strukturanalyse von Produktionssystemen
Weber, Marek
: Reinhardt, Heiner | Bachelor Thesis |
| 2018 | Bewertung konstruktiver und kompensatorischer Maßnahmen zur thermo-sensitiven Auslegung von Werkzeugmaschinenstrukturen
Regel, Joachim
: Putz, M.; Neugebauer, R. | Dissertation |
| 2018 | Cloud-basiert navigieren
Weik, Hannes | Journal Article |
| 2018 | Considering energy in the simulation of manufacturing systems
Wenzel, Sigrid; Peter, Tim; Stoldt, Johannes; Schlegel, Andreas; Uhlig, Tobias; Jósvai, János | Conference Paper |
| 2018 | Design am Computer, Multiskalen-Simulation von CMC-Materialeigenschaften
Seifert, Gerhard | Journal Article |
| 2018 | A detailed full-cell model of a 2018 commercial PERC solar cell in Quokka3
Fell, Andreas; Altermatt, Pietro P. | Journal Article |
| 2018 | Digitalisierung für den Lack
Tiedje, Oliver | Journal Article |
| 2018 | Effects of decreasing DHW supply temperatures for the efficient energy supply of buildings using low-temperature supply concepts - Extrapolation to Germany
Kallert, A.; Egelkamp, R.; Schmidt, D.; Rühling, K. | Presentation |
| 2018 | Efficiency Potential of P-Type PERT vs. PERC Solar Cells
Meier, S.; Wasmer, S.; Fell, A.; Wöhrle, N.; Greulich, J.; Wolf, A. | Conference Paper |
| 2018 | Efficient quantification of free and forced convection via the decoupling of thermo-mechanical and thermo-fluidic simulations of machine tools
Glänzel, Janine; Ihlenfeldt, Steffen; Naumann, Christian; Putz, Matthias | Journal Article |
| 2018 | Entwicklung angepasster Simulationsmodelle für Methoden der Zustandsüberwachung basierend auf geführten Wellen
Tschöke, Kilian; Gaul, Tobias | Presentation |
| 2018 | EPICSAVE - enhancing vocational training for paramedics with multi-user virtual reality
Schild, Jonas; Lerner, Dieter; Misztal, Sebastian; Luiz, Thomas | Conference Paper |
| 2018 | Erstellung und Validierung von Lastprofilen für die energieintensive Industrie
Emde, Alexander; Zimmermann, Fabian; Feil, Mirian; Sauer, Alexander | Journal Article |
| 2018 | Exoskelett - Quo vadis?
Daub, Urban; Blab, Florian; Gawlick, Sarah; Tröster, Mark | Presentation |
| 2018 | Experimental and numerical investigations of atomization processes in paint application using high-speed rotary bells
Tiedje, Oliver; Shen, Bo; Ye, Qiaoyan; Domnick, Joachim; Güttler, Nico | Conference Paper |
| 2018 | Fracture ab initio: A force-based scaling law for atomistically informed continuum models
Möller, J.J.; Bitzek, E.; Janisch, R.; Hassan, H. ul; Hartmaier, A. | Journal Article |
| 2018 | Free cooling reduces energy consumption of cold water systems
Puls, Philipp | Presentation |
| 2018 | Heat haze effects in thermal chamber tensile tests on digital image correlation
Yuile, Adam; Schwerz, Robert; Röllig, Mike; Metasch, René; Wiese, Steffen | Conference Paper |
| 2018 | Highly efficient heat transfer components produced by LBM
Kordaß, Richard; Oettel, Markus | Conference Paper |
| 2018 | Hybrid simulation-based optimization of discrete parts manufacturing to increase energy efficiency and productivity
Sobottka, Thomas; Kamhuber, Felix; Rössler, Matthias; Sihn, Wilfried | Journal Article, Conference Paper |
| 2018 | Impact assessment of power-to-X options in the German residential sector
Haendel, Michael; Elsland, Rainer | Conference Paper |
| 2018 | Impact of Uncertainties of Fundamental Models on Simulated Silicon Solar Cell Efficiencies
Wasmer, S.; Fell, A.; Greulich, J.M. | Conference Paper |
| 2018 | Influence of Interconnection Concepts for IBC Solar Cell Performance by Simulation
Huyeng, J.D.; Spribille, A.; Rendler, L.C.; Ebert, C.; Eitner, U.; Keding, R. | Conference Paper |
| 2018 | Integrated Computational Ceramics Engineering - an Approach to Radically Reduce Time-to-Market
Raether, Friedrich; Seifert, Gerhard | Journal Article |
| 2018 | Integrated electric vehicle scheduling and charging infrastructure planning for public transport
Büchter, Hubert; Naumann, Sebastian | Conference Paper |
| 2018 | Interdisciplinary multi-criteria optimization using hybrid simulation to pursue energy efficiency through production planning
Sihn, Wilfried; Sobottka, Thomas; Heinzl, Bernhard; Kamhuber, Felix | Journal Article |
| 2018 | Komplexe Bauteilherstellung virtuell und kostengünstig designen
Zappara, M.; Augenstein, E. | Journal Article |
| 2018 | LADOG - Brennstoffzelle und Batterie als Dieselersatz
Keller, S.; Christmann, K.; Heuer, A. | Journal Article |
| 2018 | Method for large-scale production of piezoceramic-metal-compounds
Drossel, Welf-Guntram; Hensel, Sebastian; Nestler, Matthias; Müller, Roland | Journal Article |
| 2018 | Modeling edge recombination in silicon solar cells
Fell, Andreas; Schön, Jonas; Müller, Matthias; Wöhrle, Nico; Schubert, Martin C.; Glunz, Stefan W. | Journal Article |
| 2018 | Modeling inherently homogeneous sintering processes
Raether, Friedrich; Seifert, Gerhard | Journal Article |
| 2018 | Modeling the catalytic conversion of steel mill gases using the example of methanol synthesis
Schlüter, Stefan; Hennig, Thorsten | Journal Article |
| 2018 | Multiphysical simulation of a multicomponent trace gas electric swing adsorption
Geitner, Christian | Conference Paper |
| 2018 | Nachhaltige Wärmebehandlungsprozesse systematisch entwickeln
Raether, Friedrich | Book |
| 2018 | Numerical simulation of silicon heterojunction solar cells featuring metal oxides as carrier-selective contacts
Meßmer, Christoph Alexander; Bivour, Martin; Schön, Jonas; Glunz, Stefan W.; Hermle, Martin | Journal Article |
| 2018 | Numerische Algorithmen für gitterfreie Methoden zur Lösung von Transportproblemen
Seifarth, Tobias
: Meister, A.; Iske, A. | Dissertation |
| 2018 | Nutzen wandlungsfähiger Energieversorgung
Kuhlmann, Timm; Sauer, Alexander | Journal Article |
| 2018 | Planning for digitalisation in SMEs using tools of the digital factory
Stoldt, Johannes; Trapp, Thies-Uwe; Toussaint, Stefan; Süße, Marian; Schlegel, Andreas; Putz, Matthias | Journal Article, Conference Paper |
| 2018 | Radical time reduction of debinding processes by combined in-situ measurements and simulation
Ziebold, Heiko; Raether, Friedrich; Seifert, Gerhard | Journal Article |
| 2018 | Rapid Calculation of the Backsheet Coupling Gain Using Ray Groups
Pfreundt, A.; Mittag, M.; Heinrich, M.; Eitner, U. | Conference Paper |
| 2018 | Requirements for efficient hole extraction in transition metal oxide-based silicon heterojunction solar cells
Meßmer, Christoph Alexander; Bivour, Martin; Schön, Jonas; Hermle, Martin | Journal Article |
| 2018 | Sichere Prozesse für moderne Geschäftsmodelle
Giehl, Alexander; Schneider, Peter | Journal Article |
| 2018 | A simulation driven branch and bound optimizer for planning charging infrastructures
Büchter, Hubert; Pöter, Elisabeth | Conference Paper |
| 2018 | Simulation Framework for Active Upper Limb Exoskeleton Design Optimization Based on Musculoskeletal Modeling
Tröster, Mark; Schneider, Urs; Bauernhansl, Thomas; Rasmussen, John; Andersen, Michael | Conference Paper |
| 2018 | Simulation in power electronics design. Simulation, possibilities, and issues
Bayer, Christoph Friedrich | Presentation |
| 2018 | Simulation von Vorbehandlungsverfahren
Schieweck, Jörg | Journal Article |
| 2018 | Simulation- und Testumgebung für IEC 61850
Requardt, B.; Wende-von Berg, S.; Töbermann, J.-C.; Braun, M. | Presentation |
| 2018 | A simulation-based method for improving material efficiency within the constraints of existing production systems
Sheehan, Erin
: Sauer, Alexander (Hauptberichter); Steinhilper, Rolf (Mitberichter) | Dissertation |
| 2018 | Simulationsgestütze Bewertung von Steuerungs- und Regelungsansätzen für eine energieeffiziente Produktionslogistik in Gießereien
Fuss, Emanuel
: Kuhn, Axel (Hrsg.); Beckmann, Holger (Gutachter) | Dissertation |
| 2018 | Stromoptimierte KWK in der Galvanikbranche
Köse, Ekrem; Sauer, Alexander; Thomas, Bernd; Müller, Tobias; Kölle, Stefan; Schwanzer, Peter | Journal Article |
| 2018 | System and path planning algorithm for low-kV X-ray free-form surface irradiation
Rothfuss, Andreas; Oesterle, Oliver; Bürgy, Daniel; Nwankwo, Charles; Schneider, Frank; Poelgeest, Auguste van; Wenz, Frederik; Stallkamp, Jan; Clausen, Sven | Journal Article |
| 2018 | Technologieorientierte Fabrikplanung
Haar, Christoph | Conference Paper |
| 2018 | Temperature supported hydroforming of stainless steels tubes
Mosel, Andre; Lambarri, Jon; Degenkolb, Lars; Hinojo, José-Luis; Rößiger, Jörg; Eurich, Egbert | Report |
| 2018 | Verformung, Schädigung und Mikrostrukturentwicklung der Legierung Alloy 800H unter Ermüdungsbeanspruchung bei hohen Temperaturen
Hübsch, Oliver
: Riedel, Hermann; Heilmaier, Martin | Dissertation |
| 2017 | Acoustical improvement of a train gearbox based on gear microgeometry and housing geometry optimization
Haase, Manuel; Bräunig, Jan; Hensel, Eric | Conference Paper |
| 2017 | Analysis of backsheet and rear cover reflection gains for bifacial solar cells
Mittag, M.; Grünzweig, A.; Wiese, M.; Mahmoud, N.; Schmid, A.; Heinrich, M. | Conference Paper |
| 2017 | Anisotropy in carbon fiber reinforced polymer (CFRP) and its effect on induction thermography
Guo, Jianguang; Gao, Xiaorong; Toma, Ewald; Netzelmann, Udo | Journal Article |
| 2017 | Aus Draht wird ein Produkt. Überblick zu den Möglichkeiten von Industrie 4.0 bei Herstellung und Verarbeitung
Beyer, Ulrike; Putz, Matthias | Presentation |
| 2017 | Beeinflussung der akustischen Eigenschaften permanenterregter Synchronmotoren kleiner Baugröße durch das Ansteuerverfahren
Olbrich, Markus
: Burkhardt, Thomas | Thesis |
| 2017 | Betrachtungen energetischer Einflussfaktoren in der Simulation in Produktion und Logistik. Eine Literaturanalyse
Wenzel, Sigrid; Peter, Tim; Stoldt, Johannes; Schlegel, Andreas; Rabe, Markus; Groß, Guido; Seewaldt, Marco; Pietsch, Holger | Conference Paper |
| 2017 | Carrier mobility shift in advanced silicon nodes due to chip-package interaction
Sukharev, Valeriy; Choy, Jun-Ho; Kteyan, Armen; Hovsepyan, Henrik; Nakamoto, Mark; Zhao, Wei; Radojcic, Riko; Mühle, Uwe; Zschech, Ehrenfried | Journal Article |
| 2017 | Categorization of established methodologies used in operation and maintenance simulations of offshore wind farms, a literature review
Bendin, D.; Wolken-Möhlmann, G.; Marx Gómez, J. | Conference Paper |
| 2017 | Challenge and procedure in joining process simulation of high-speed solid self-piercing riveting with LS-DYNA
Jesche, Fred; Kraus, Christian; Hensel, Sebastian | Conference Paper |
| 2017 | Characterisation of load-bearing capacity and failure behaviour of different mechanical joints under crash load of steel intensive structures
Giese, P.; Meschut, G.; Sommer, S.; Rochel, P. | Conference Paper |
| 2017 | Characterization and modelling of soft zones around spot welds in high strength steels
Schuster, L. | Conference Paper |
| 2017 | Computational Multiscale Modeling of Fluids and Solids. Theory and Applications
Steinhauser, Martin O. | Book |
| 2017 | Consistent simulation strategy for heat sources and fluxes in milling
Putz, Matthias; Oppermann, Christian; Semmler, Ulrich; Bräunig, Michael; Karagüzel, Umut | Journal Article, Conference Paper |
| 2017 | Contactless characterization of electric structures with simulation models based on CT data
Jauch, Christian; Denecke, Julia; Kühnle, Jens; Effenberger, Ira; Hillebrand, Jürgen; Kieß, Steffen; Simon, Sven | Conference Paper |
| 2017 | Decoupling of fluid and thermo-elastic simulations on machine tools using characteristic diagrams
Glänzel, Janine; Ihlenfeldt, Steffen; Naumann, Christian; Putz, Matthias | Journal Article, Conference Paper |
| 2017 | Digitale Lackierung
Tiedje, Oliver | Conference Paper |
| 2017 | Do plug-in electric vehicles cause a change in travel behavior?
Heilig, Michael; Gnann, Till; Plötz, Patrick; Mallig, Nicolai; Briem, Lars; Kagerbauer, Martin; Vortisch, Peter | Presentation |
| 2017 | Dynamic method for determination of coupling efficiencies in laser material processing
Hipp, Dominik; Mahrle, Achim; Beyer, Eckhard | Conference Paper |
| 2017 | Dynamische Sensitivitätsanalysemethoden energetischer Wohngebäudequartierssimulationen
Lindauer, Manuel
: Sedlbauer, Klaus (Prüfer); Leistner, Philip (Hrsg.); Mehra, Schew-Ram (Hrsg.); Lang, Werner (Prüfer); Hensen, Jan L.M. (Prüfer) | Dissertation |
| 2017 | Efficient air flow control for remote laser beam welding
Mahrle, Achim; Borkmann, Madlen; Beyer, Eckhard; Leyens, Christoph; Hustedt, Michael; Hennigs, Christian; Brodeßer, Alexander; Walter, Jürgen; Kaierle, Stefan | Conference Paper |
| 2017 | Einfluss der Lackeigenschaften auf die Appearance
Tiedje, Oliver; Seeler, Fabian | Conference Paper |
| 2017 | Electrification of public bus transport under the usage of electricity generated by renewables
Dicke, Paul; Meyer, Benedikt; Pruckner, Marco | Conference Paper |
| 2017 | Elektrischer Antriebsstrang für Arbeits- und Nutzfahrzeuge (ELAAN)
Keller, S. | Conference Paper |
| 2017 | Energieautarke Mobilität für kontextsensitive Gebäudeautomatisierung (EnKonSens). Teilvorhaben: Zuverlässige energieautarke Schaltungen und Systeme
Rülke, Steffen; Fehlauer, Erhard; Dietrich, Manfred; Vermeiren, Wolfgang; Radke, Stephan; Harasymiv, Ihor; Jancke, Roland | Report |
| 2017 | Enhancing the energy-efficient production of tempered glass by using simulation-based optimisation
Seidel, Stephan; Franke, Matthias; Baumann, Frank; Wilson, Heike; Gromnitza, Ulrike | Conference Paper |
| 2017 | Evaluation of the relevance of melt pool dynamics in Laser Material Deposition process modeling
Arrizubieta, Jon Iñaki; Lamikiz, Aitzol; Klocke, Fritz; Martínez, Silvia; Arntz, Kristian; Ukar, Eneko | Journal Article |
| 2017 | A fast and easy perovskite solar cell simulation tool featuring ion migration
Fell, Andreas; Walter, Daniel; Glunz, Stefan W. | Conference Paper |
| 2017 | Fresnel calculation of holograms for micrometer-scale material structuring on substrates with complex surface topography
Kabardiadi-Virkovski, Alexander; Baselt, Tobias; Lasagni, Andrés-Fabián; Hartmann, Peter | Conference Paper |
| 2017 | Go-3D 2017: Mit 3D Richtung Maritim 4.0
: Lukas, Uwe von (Hrsg.); Mahnke, Eva-Maria (Hrsg.); Bauer, Kristine (Hrsg.) | Conference Proceedings |
| 2017 | Heat sources and fluxes in milling: Comparison of numerical, analytical and experimental results
Putz, Matthias; Oppermann, Christian; Bräunig, Michael; Karagüzel, Umut | Journal Article, Conference Paper |
| 2017 | How many fast charging stations do we need along the German highway network?
Reuter-Oppermann, Melanie; Funke, Simon Á.; Jochem, Patrick; Graf, Felix | Presentation |
| 2017 | Impact of material and process variations on the distribution of multicrystalline silicon PERC cell efficiencies
Wasmer, S.; Greulich, J.; Höffler, H.; Wöhrle, N.; Demant, M.; Fertig, F.; Rein, S. | Journal Article |
| 2017 | Increasing energy efficiency in production environments through an optimized, hybrid simulation-based planning of production and its periphery
Sobottka, Thomas; Kamhuber, Felix; Sihn, Wilfried | Journal Article, Conference Paper |
| 2017 | Increasing the efficiency of multicrystalline silicon PERC solar cells from currently 19% to 20%
Greulich, J.; Lohmüller, E.; Saint-Cast, P.; Werner, S.; Wasmer, S.; Horst, A.J. van der; Preu, R. | Conference Paper |
| 2017 | The influence of occupancy behaviour on the performance of mechanical ventilation systems regarding energy consumption and IAQ
Carbonare, N.; Coydon, F.; Dinkel, A.; Bongs, C. | Conference Paper |
| 2017 | The influence of sintering additives on the microstructure and material properties of silicon nitride ceramics investigated by advanced simulation tools
Brockmann, Dorothea E. R.; Staab, Torsten E. M.; Raether, Friedrich | Journal Article |
| 2017 | Integrating DRAM power-down modes in gem5 and quantifying their impact
Jagtap, Radhika; Jung, Matthias; Elsasser, Wendy; Weis, Christian; Hansson, Andreas; Wehn, Norbert | Conference Paper |
| 2017 | Kinematisch modulierte Schleifprozesse zur Strukturierung von tribologisch beanspruchten Funktionsoberflächen
Bäcker, Clemens
: Göhlich, D.; Uhlmann, E.; Karpuschewski, B. | Dissertation |
| 2017 | Know thy neighbor - a data-driven approach to neighborhood estimation in VANETs
Roscher, Karsten; Nitsche, Thomas; Knorr, Rudi | Conference Paper |
| 2017 | Messmethoden in der Lackapplikation
Güttler, Nico | Conference Paper |
| 2017 | Methodische Erweiterung des Supply Chain Designs zur Integration einer ökologischen Bewertung
Cirullies, Jan
: Kuhn, Axel (Hrsg.) | Dissertation |
| 2017 | Mindful engagement in emerging IT innovations - a dynamic optimization model considering organizational learning in IT innovation investment evaluation
Häckel, Björn; Lindermeir, Andreas; Moser, Florian; Pfosser, Stefan | Journal Article |
| 2017 | Modeling and simulation of the fluid flow in wire electrochemical machining with rotating tool (wire ECM)
Klocke, Fritz; Herrig, Tim; Zeis, Markus; Klink, Andreas | Conference Paper |
| 2017 | Modeling of edge recombination losses in half-cells
Fell, Andreas; Sträter, H.; Müller, M.; Steinkemper, Heiko; Schön, Jonas; Hermle, Martin; Schubert, Martin C.; Neuhaus, D.H.; Glunz, Stefan W. | Conference Paper |
| 2017 | Modellierung quellungsbedingter Spannungen in PMMA mittels FEM unter Berücksichtigung von Sorptionsisothermen
Geertz, Guru
: Heinrich, Gert (Berichterstatter); Rehahn, Matthias (Mitberichterstatter) | Dissertation |
| 2017 | Modelling die filling for powders with complex rheology: A new DEM contact-model
Breinlinger, T.; Schubert, R.; Hashibon, A.; Kraft, T. | Presentation |
| 2017 | A modular fuel cell battery hybrid propulsion system for powering small utility vehicles
Keller, S.; Christmann, K.; Sanchez-Arjona Gonzalez, M.; Heuer, A. | Presentation |
| 2017 | Multi-segment photovoltaic laser power converters and their electrical losses
Kimovec, R.; Helmers, H.; Bett, A.W.; Topic, M. | Conference Paper |
| 2017 | Multiscale modeling, coarse-graining and shock wave computer simulations in materials science
Steinhauser, Martin O. | Journal Article |
| 2017 | Neighboring system as black start source and restoration process based on the VSC-HVDC as tie line
Akbulut, A.; Becker, H.; Mende, D.; Stock, D.S.; Hofmann, L. | Conference Paper |
| 2017 | On the feasibility of multi-hop communication in a realistic city scenario
Roscher, Karsten | Conference Paper |
| 2017 | Paradigmenwechsel der Planung und Steuerung von Wertschöpfungsnetzen
Besenfelder, Christoph; Brüggenolte, Matthias; Austerjost, Maximilian; Kämmerling, Nicolas; Pöting, Moritz; Schwede, Christian; Schellert, Maximilian | Report |
| 2017 | Physikalische Modellbildung für das Additive Sintern von Kunststoffmaterialien
Wohlgemuth, Florian; Alig, Ingo | Book Article |
| 2017 | Platinum diffusion for advanced silicon power devices
Badr, Elie
: Pichler, Peter; Wellmann, Peter | Dissertation |
| 2017 | Power loss through decorative elements in the front glazing of BIPV modules
Mittag, M.; Kutter, C.; Ebert, M.; Wilson, H.R.; Eitner, U. | Conference Paper |
| 2017 | Principles of carrier-selective contacts based on induced junctions
Bivour, Martin; Meßmer, Christoph Alexander; Neusel, Lisa; Zähringer, Florian; Schön, Jonas; Glunz, Stefan W.; Hermle, Martin | Conference Paper |
| 2017 | Procedure model for efficient simulation studies which consider the flows of materials and energy simultaneously
Stoldt, Johannes; Putz, Matthias | Journal Article, Conference Paper |
| 2017 | Process simulation and experimental validation of Hot Metall Gas Forming with new press hardening steels
Paul, Alexander; Reuther, Franz; Neumann, Stanley; Albert, André; Landgrebe, Dirk | Conference Paper |
| 2017 | Protocol modeling accuracy in VANET simulators
Bittl, Sebastian; Roscher, Karsten | Conference Paper |
| 2017 | Prozesssimulation des neuen Umformverfahrens Lochwandungsfurchen
Haase, Rico | Poster |
| 2017 | Safe Human-Robot-Collaboration (HRC) based on a new concept considering human movement variability
Harsch, Ann-Kathrin; Delang, Kathleen; Bdiwi, Mohamad; Breitfeld, Marco; Putz, Matthias | Presentation |
| 2017 | Schritte zur Qualifizierung der Schweißstruktursimulation für die additive Fertigung am Beispiel Laser-Pulver-Auftragsschweißen
Biegler, Max | Conference Paper |
| 2017 | Selective solvent evaporation from binary mixtures of water and tetrahydrofuran using a falling film microreactor
Bomhard, Sibylle von; Schelhaas, Karl-Peter; Alebrand, Sabine; Musyanovych, Anna; Maskos, Michael; Drese, Klaus Stefan | Journal Article |
| 2017 | Self-optimizing production technologies
Klocke, Fritz; Abel, Dirk; Gries, Thomas; Hopmann, Christian; Loosen, Peter; Poprawe, Reinhart; Reisgen, Uwe; Schmitt, Robert; Schulz, Wolfgang; Abels, Peter; Adams, Oliver; Auerbach, Thomas; Buchholz, Guido; Döbbeler, Benjamin; Frank, Daniel; Heinisch, Julian; Hermanns, Torsten; Gloy, Yves-Simon; Keitzel, Gunnar; Kemper, Maximilian; Martel, Diana Suarez; Reimer, Viktor; Reiter, Matthias; Saggiomo, Marco; Schwenzer, Max; Stemmler, Sebastian; Stoyanov, Stoyan; Thombansen, Ulrich; Veselovac, Drazen; Willms, Konrad | Book Article |
| 2017 | Sensor data fusion for textured reconstruction and virtual representation of alpine scenes
Häufel, Gisela; Bulatov, Dimitri; Solbrig, Peter | Conference Paper |
| 2017 | SimQRi - Simualtive Quantifizierung der Risikofolgen und der internen Maßnahmewirkungen in komplexen Beschaffungsketten zur externen Risikobehandlung
Jeschke, Sabina; Vossen, René; Klocke, Fritz; Hubaux, Damien | Report |
| 2017 | A simulation based evaluation approach for supply chain risk management digitalization scenarios
Schlüter, Florian; Hetterscheid, Endric | Conference Paper |
| 2017 | Simulation of an oil film at the sea surface and its radiometric properties in the SWIR
Schwenger, Frédéric; Eijk, Alexander M.J. van | Conference Paper |
| 2017 | Simulation und Verlustanalyse von lokal rückseitenkontaktierten Silicium-Solarzellen
Wöhrle, Nico
: Lausen, G.; Weber, E.R.; Altermatt, P. | Dissertation |
| 2017 | Simulation-based evaluation of operation and maintenance logistics concepts for offshore wind power plants
Münsterberg, Torsten
: Jahn, Carlos | Dissertation |
| 2017 | Simulationen der UV-Härtung
Schieweck, Jörg | Conference Paper |
| 2017 | Simulations and experimental investigation of paint film leveling
Seeler, Fabian; Hager, Christian; Tiedje, Oliver; Schneider, Matthias | Journal Article |
| 2017 | Simulationsgestütztes Performance Measurement zur Wirtschaftlichkeitsbewertung von Managementsystemen
Raßfeld, Colin
: Krüger, J.; Jochem, R.; Woll, R. | Dissertation |
| 2017 | Simulationsmodell als Basis zur Ableitung von Zerspanstrategien zur Reduzierung von thermischen Bearbeitungseinflüssen beim Hartdrehen
Ivanov, Ivan Mitkov
: Uhlmann, Eckardt | Dissertation |
| 2017 | Smart objects and smart finance for supply chain management
Witthaut, Markus; Deeken, Henning; Sprenger, Philipp; Gadzhanov, Petyo; David, Marcel | Journal Article |
| 2017 | Software implementieren und absichern
Weiß, Gereon; Jiru, Josef | Journal Article |
| 2017 | Steigerung der Prozessstabilität und Schweißnahtqualität beim Remote-Laserstrahlschweißen durch adaptierte Strömungsführung
Hennings, Christian; Brodeßer, Alexander; Hustedt, Michael; Kaierle, Stefan; Borkmann, Madlen; Mahrle, Achim; Beyer, Eckhard | Journal Article |
| 2017 | Supporting the design of effective and efficient custom detection architectures through modeling and simulation
Kretschmann, Lutz | Presentation |
| 2017 | Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2017
: Benoit, Charlot; Mita, Yoshio; Nouet, Pascal; Pellet, Claude; Pressecq, Francis; Schneider, Peter; Smith, Steward | Conference Proceedings |
| 2017 | Systematic search for lithium ion conducting compounds by screening of compositions combined with atomistic simulation
Mutter, D.; Urban, D.; Elsässer, C. | Journal Article |
| 2017 | Towards an optimal investment strategy considering fashionable IT innovations a dynamic optimization model
Bürger, Olga; Häckel, Björn; Moser, Florian | Journal Article |
| 2017 | Towards holistic power distribution system validation and testing - an overview and discussion of different possibilities
Strasser, T.; Pröstl Andrén, F.; Lauss, G.; Bründlinger, R.; Brunner, H.; Moyo, C.; Seitl, C.; Rohjans, S.; Lehnhoff, S.; Palensky, P.; Kotsampopoulos, P.; Hatziargyriou, N.; Arnold, G.; Heckmann, W.; Jong, E.; Verga, M.; Franchioni, G.; Martini, L.; Kosek, A.; Gehrke, O.; Bindner, H.; Coffele, F.; Burt, G.; Calin, M.; Rodriguez-Seco, E. | Journal Article |
| 2017 | Trocknungssimulation in Lackierprozessen
Ye, Qiaoyan; Tiedje, Oliver | Conference Paper |
| 2017 | Validation methodology to analyze the temperature-dependent heat path of a 4-chip LED module using a finite volume simulation
Mitterhuber, L.; Defregger, S.; Hammer, R.; Magnien, J.; Schrank, F.; Hörth, S.; Hutter, M.; Kraker, E. | Journal Article |
| 2017 | Validation of analytic modelling of local rear contacts in PERC/PERL solar cells
Saint-Cast, P.; Wöhrle, N.; Greulich, J.M. | Conference Paper |
| 2017 | Vorhersage und Bewertung der Qualitätskriterien rollgefalzter Karosserieanbauteile
Hecht, Benjamin | Dissertation |
| 2017 | Zur Erdgasgewinnung aus submarinen Gashydratvorkommen mit CO2-Rückspeicherung
Janicki, Georg
: Deerberg, Görge (Erstgutachter); Weidner, Eckhard (Zweitgutachter) | Dissertation |
| 2016 | 3D simulation of light exposure and resist effects in laser direct write lithography
Onanuga, Temitope; Erdmann, Andreas | Conference Paper |
| 2016 | Acoustical optimization of a train gearbox based on overall system simulation
Troge, Jan; Drossel, Welf-Guntram; Hensel, Eric; Zumach, Sebastian; Bräunig, Jan | Conference Paper |
| 2016 | Additive manufacturing of active struts for piezoelectric shunt damping
Mayer, Dirk; Stoffregen, Hanns Alexander; Heuss, Oliver; Pöllmann, Jennifer; Thiel, Jennifer; Abele, Eberhard; Melz, Tobias | Journal Article, Conference Paper |
| 2016 | Advanced interpolation cut-cell method for numerically solving continuum granular flow equations
Neusius, David
: Klar, A.; Stockie, J. | Dissertation |
| 2016 | Advanced simulations for G.fast, Vectoring & Co
Hincapie, Daniel; Leibiger, Mathias | Journal Article |
| 2016 | Akustische Optimierung eines Bahngetriebes
Hensel, Eric; Zumach, Sebastian; Troge, Jan | Journal Article |
| 2016 | All-diffused back-contact back-junction solar cell with aluminum-alloyed emitter - experiment and simulation
Wöhrle, N.; Kimmerle, A.; Greulich, J.; Wolf, A. | Journal Article |
| 2016 | Analysis of dynamic interactions between different drivetrain components with a detailed wind turbine model
Bartschat, A.; Morisse, M.; Mertens, A.; Wenske, J. | Conference Paper, Journal Article |
| 2016 | Application of adaptive time delay model in optimal control of a hydropower cascade
Nguyen, L.D.; Karimanzira, Divas; Rauschenbach, Thomas | Journal Article, Conference Paper |
| 2016 | Application of substructure decoupling techniques to predict mobile machine tool dynamics: Numerical investigations
Law, Mohit; Rentzsch, Hendrik; Ihlenfeldt, Steffen; Putz, Matthias | Journal Article, Conference Paper |
| 2016 | Assessment of risks in manufacturing using discrete-event simulation
Landtsheer, Renaud de; Ospina, Gustavo; Massonet, Philippe; Ponsard, Christophe; Printz, Stephan; Jeschke, Sabina; Härtel, Lasse; Cube, Johann Philipp von; Schmitt, Robert | Book Article |
| 2016 | Bearbeitung großer Werkstücke mit mobilen Werkzeugmaschinen
Rentzsch, Hendrik | Presentation |
| 2016 | Calculation of power losses in litz wire systems by coupling FEM and PEEC method
Roßkopf, Andreas; Bär, Eberhard; Joffe, Christopher; Bonse, Clemens | Journal Article |
| 2016 | Choosing the best silicon material parameters for different solar cell architectures
Steinkemper, H.; Michl, B.; Hermle, M.; Glunz, S.W. | Journal Article, Conference Paper |
| 2016 | Comprehensive simulation study of industrially relevant silicon solar cell architectures for an optimal material parameter choice
Steinkemper, H.; Hermle, M.; Glunz, S.W. | Journal Article |
| 2016 | Comprehensive technology exploitation using system dynamics and scenario analysis
Schuh, Günther; Drescher, Toni; Engel, Markus; Kreutzer, Ramon | Journal Article |
| 2016 | Converter lifetime assessment for doubly-fed induction generators considering derating control strategies at low rotor frequencies
Morisse, M.; Bartschat, A.; Wenske, J.; Mertens, A. | Conference Paper |
| 2016 | Deliverable D2.3 - System Architecture and Technical Specifications
Polemi, Nineta; Papastergiou, Spyros; Karantjias, Athanassios; Drosos, Nikos; Gouvas, Panagiotis; Duzha, Armend; Bianchi, Manuel; Campana, Flavio; Erler, Timo; Schauer, Stefan; Mouratidis, Haris; Pavlidis, Michalis; Rekleitis, Evangelos | Report |
| 2016 | Demand Side Management
Weckmann, Sebastian; Jin, Hao; Sauer, Alexander | Journal Article |
| 2016 | Design and evaluation of a distributed consensus framework for safety related applications in vehicular ad-hoc NETworks (VANETs)
Shah, Jay
: Jacobsen, Hans-Arno (Supervisor); Jergler, Martin (Advisor); Roscher, Karsten (Advisor) | Master Thesis |
| 2016 | Design parameter study of a CFRP T-joint under overpressure conditions due to ballistic impact
Sandoval Murillo, José L.; Ganzenmüller, Georg; Heimbs, Sebastian; May, Michael | Presentation |
| 2016 | Determination of target detection limits in hyperspectral data using band selection and dimensionality reduction
Gross, Wolfgang; Boehler, J.; Twizer, K.; Kedem, B.; Lenz, Andreas; Kneubuehler, M.; Wellig, P.; Oechslin, R.; Schilling, Hendrik; Rotman, S.; Middelmann, Wolfgang | Conference Paper |
| 2016 | Digitale Werkzeuge in der Fabrikplanung
Lickefett, Michael | Conference Paper |
| 2016 | Dresdner Arbeitstagung Schaltungs- und Systementwurf, DASS 2016
: Gleichner, Christian; Vierhaus, Heinrich T. | Conference Proceedings |
| 2016 | Enhanced integration of energy-related considerations in discrete event simulation for manufacturing applications
Stoldt, Johannes; Schlegel, Andreas; Putz, Matthias | Journal Article |
| 2016 | Die Entstehung von Lackfilmstrukturen verstehen
Hilt, Michael; Tiedje, Oliver; Seeler, Fabian | Journal Article |
| 2016 | Entwicklung einer neuen Methode zur Ansteuerung von Ultraschall-Phased Arrays
Gommlich, Andreas
: Meyendorf, Norbert (Betreuer/Gutachter); Gerlach, Gerald (Gutachter); Holstein, Peter (Gutachter); Schubert, Frank (Betreuer) | Dissertation |
| 2016 | Entwicklung eines piezoresistiven Drucksensors für Hochtemperaturanwendungen auf Basis eines SOI-Substrats
Goehlich, Andreas; Jupe, Andreas; Stühlmeyer, Martin; Celik, Yusuf; Schmidt, Andrei; Vogt, Holger | Conference Paper |
| 2016 | An evaluation methodology for VANET applications combining simulation and multi-sensor experiments
Seydel, Dominique; Bittl, Sebastian; Pfeiffer, Jakob; Jiru, Josef; Beckmann, Hanno; Frankl, Kathrin; Eissfeller, Bernd | Conference Paper |
| 2016 | Evaluation of experimental UAV video change detection
Bartelsen, Jan; Saur, Günter; Teutsch, Christian | Conference Paper |
| 2016 | Experimental investigations and numerical simulation accompanying the HWT test loop operation
Speicher, M.; Klenk, A.; Oesterlin, H.; Maier, G.; Schwienherr, M.; Wang, Y.; Scholz, A.; Oechsner, M. | Conference Paper |
| 2016 | Finite Element Simulation of Delamination Processes when Side Milling the Edges of Cross-Ply CFRP
Vazquez Martinez, Hector; Esch, Philipp; Patel, Krunal | Presentation |
| 2016 | Friction analyses of dimple-structured surface
Stoeterau, Rodrigo Lima; Janssen, Andreas; Mallmann, Guilherme | Journal Article |
| 2016 | Heterogeneous networking for cooperative applications
Roscher, Karsten | Presentation |
| 2016 | High performance sheet metal forming tooling by additive manufacturing
Gebauer, Mathias; Müller, Bernhard; Spierings, Adriaan; Polster, Stefan; Stoll, Philipp; Feld, Tobias; Klinger, Marcel; Zurbrügg, Andreas | Conference Paper |
| 2016 | A hybrid optimization approach in non-isothermal glass molding
Vu, Anh-Tuan; Kreilkamp, Holger; Krishnamoorthi, Bharathwaj Janaki; Dambon, Olaf; Klocke, Fritz | Conference Paper |
| 2016 | Hybride Werkstoffverbunde auf Nickelbasis
Landgrebe, Dirk; Schubert, Nadine; Lehnert, Tim | Journal Article |
| 2016 | Identifikation und Handling von marktgetriebenen energetischen Lastreserven am Beispiel eines Bergbaubetriebs
Lange, Hans Rüdiger; Köhler, Uwe; Fanghänel, Christin | Conference Paper |
| 2016 | Impact of the solar eclipse from 20th March 2015 on the German Electrical Supply - simulation and analysis
Killinger, S.; Kreifels, N.; Burger, B.; Müller, B.; Stiff, G.; Wittwer, C. | Journal Article |
| 2016 | Improving the Consistency and Completeness of Safety Requirements Specifications
Assis, Pablo Oliveira Antonino de | Dissertation |
| 2016 | Inductive high data rate transmission for bearing systems
Ziller, Janina; Draeger, Tobias; Heckel, Thomas | Conference Paper |
| 2016 | Industrie 4.0 - Technologies for machine tools and production equipment
Blau, Peter; Koriath, Hans-Joachim; Wabner, Markus | Presentation |
| 2016 | Logistics optimization for offshore wind parks through simulation based on real-time data
Münsterberg, Torsten | Presentation |
| 2016 | Lumineszenz-Imaging Anwendungen in industrieller Fertigungsumgebung von Silicium-Solarzellen
Höffler, Hannes | Dissertation |
| 2016 | Materialflussmodelle für die HiL-Simulation
Scheifele, Christian; Lechler, Armin; Verl, Alexander | Journal Article |
| 2016 | A mechanism-based model for prediction of damage and failure in cold forging processes
Zapara, M.; Augenstein, E.; Helm, D. | Conference Paper |
| 2016 | Messung von Risswiderstandskurven und der Ermüdungsrissausbreitung an dünnwandigen Rohren zur bruchmechanischen Bewertung
Wackermann, K.; Schweizer, C.; Varfolomeev, I.; Maier, G.; Mohrmann, R. | Conference Paper |
| 2016 | Model-based decision support in supply chains - requirements for monetary supply risk quantification
Cube, Johann Philipp von; Härtel, Lasse; Schmitt, Robert | Journal Article, Conference Paper |
| 2016 | Modeling and simulation of temperature-dependent cyclic plastic deformation of austenitic stainless steels at the VHCF limit
Hilgendorff, Philipp-Malte; Grigorescu, Andrei; Zimmermann, Martina; Fritzen, Claus-Peter; Christ, H.-J. | Journal Article, Conference Paper |
| 2016 | Modeling of heat fluxes during machining and their effects on thermal deformation of the cutting tool
Putz, Matthias; Schmidt, Gerhard; Semmler, Ulrich; Oppermann, Christian; Bräunig, Michael; Karagüzel, Umut | Journal Article, Conference Paper |
| 2016 | Modellbasierte Prozessoptimierung für das Mikrofräsen
Mahr, Frederik Felix
: Uhlmann, Eckart | Dissertation |
| 2016 | Modellierung von raum-zeitlichen Eigenschaften der Windenergieeinspeisung für wetterdatenbasierte Windleistungssimulationen
Knorr, K. | Dissertation |
| 2016 | Monetary quantification of supply risks of manufacturing enterprises - discrete event simulation based approach
Cube, Philipp von; Härtel, Lasse; Schmitt, Robert; Ponsard, Christophe; Massonet, Philippe; Landtsheer, Renaud de; Ospina, Gustavo; Printz, Stephan; Jeschke, Sabina | Journal Article, Conference Paper |
| 2016 | A new DEM contact-model for simulating die filling for powders with complex rheology
Hashibon, A.; Breinlinger, T.; Schubert, R.; Kraft, T. | Conference Paper |
| 2016 | Numerical Simulation of Residual Stresses and Deformations in Laser Beam Melting
Töppel, Thomas; Kordaß, Richard; Beyer, Ulrike; Sakkiettibutra, Jens | Conference Paper |
| 2016 | On determination of focal laws for linear phased array probes as to the active and passive element size
Gommlich, Andreas; Schubert, Frank | Conference Paper |
| 2016 | Optimierte Gestaltung von Lasteinleitungselementen für thermoplastische Sandwichbauteile
Fliegener, S.; Hohe, J. | Journal Article |
| 2016 | Parallele Seilroboter in Theorie und Praxis
Tempel, Philipp Thomas; Pott, Andreas | Journal Article |
| 2016 | Physically sound parameterization of incomplete ionization in aluminum-doped silicon
Steinkemper, H.; Altermatt, P.P.; Hermle, M. | Journal Article |
| 2016 | Pre-strain dependent relaxation behaviour of AA6016 during automotive paint drying processes
Regensburger, Jochen; Cwiekala, N.; Albiez, Christoph; Drossel, Welf-Guntram | Journal Article |
| 2016 | Predictive numerical simulation of the sintering behavior of ceramic components based on kinetic field and FE methods
Ziebold, Heiko | Abstract |
| 2016 | Production, characterisation and processing of metal plastic composites with modified core materials
Riemer, Matthias; Müller, Roland; Landgrebe, Dirk; Wuehrl, Mario; Klärner, Matthias; Kroll, Lothar; Geweth, Christian; Marburg, Steffen | Conference Paper |
| 2016 | Projection of power generation between differently-oriented PV systems
Killinger, S.; Braam, F.; Müller, B.; Wille-Haussmann, B.; McKenna, R. | Journal Article |
| 2016 | Reliable message forwarding in VANETs for delay-sensitive applications
Roscher, Karsten; Maierbacher, Gerhard | Conference Paper |
| 2016 | Schmier- und Kühleffekte mit Simulation verbessern
Vazquez Martinez, Hector | Journal Article |
| 2016 | Screen-printed metallization concepts for large-area back-contact back-junction silicon solar cells
Hendrichs, M.; Padilla, M.; Walter, J.; Clement, F.; Rech, B. | Journal Article |
| 2016 | Self-pierce riveting of materials with limited ductility investigated with the Bai-Wierzbicki damage model in GISSMO
Hofmann, Martin; Andersson, Robert; Wallmersperger, Thomas; Jäckel, Mathias; Landgrebe, Dirk | Presentation |
| 2016 | Simplified device simulation of silicon solar cells using a lumped parameter optical model
Fell, A.; McIntosh, K.R.; Fong, K.C. | Journal Article |
| 2016 | Simulating the effect of production lot sizes on material and energy efficiency
Sheehan, Erin; Kuhlmann, Timm; Sauer, Alexander | Journal Article, Conference Paper |
| 2016 | Simulation-based assessment and optimization of the energy consumption in multi variant production
Kruse, Andreas; Uhlemann, Thomas H.-J.; Steinhilper, Rolf | Conference Paper, Journal Article |
| 2016 | Simulationsbasierte Entscheidungsunterstützung des Geräte-Einsatzmanagements im Kammer-Pfeilerbau unter Berücksichtigung von Produktivität, Fördermengen und Ernergieverbräuchen
Bruns, Axel; Kuhlmann, Timm; Thiele, Johann-Christoph | Journal Article |
| 2016 | Simulationsdatenbasierte Akustische Optimierung eines Bahngetriebes
Hensel, Eric; Zumach, Sebastian; Drossel, Welf-Guntram; Bischof, Christian | Conference Paper |
| 2016 | Simulator Coupling for Network Fault Injection Testing
Cioroaica, Emilia; Kuhn, Thomas | Conference Paper |
| 2016 | Small signal modelling approach for submillimeter wave III-V HEMTs with analysation and optimization possibilities
Ohlrogge, M.; Tessmann, A.; Leuther, A.; Weber, R.; Massler, H.; Seelmann-Eggebert, M.; Schlechtweg, M.; Ambacher, O. | Conference Paper |
| 2016 | Structural integration of piezoceramic fibers in deep drawn sheet metal for material-integrated health monitoring
Müller, Michael; Müller, Benedikt; Hensel, Sebastian; Nestler, Matthias; Jahn, Stephan F.; Müller, Roland; Schubert, Andreas; Drossel, Welf-Guntram | Journal Article |
| 2016 | Systementwicklung zur Strukturüberwachung mit geführten Wellen
Schubert, Lars; Weihnacht, Bianca; Lieske, Uwe; Frankenstein, Bernd; Gebhardt, Sylvia; Neumeister, Peter; Neubert, Holger | Conference Paper |
| 2016 | Target system based design of quality control strategies in global production networks
Arndt, Tobias; Lemmerer, Christina; Sihn, Wilfried; Lanza, Gisela | Journal Article, Conference Paper |
| 2016 | Technologieorientierte Fabrikplanung
Denner, Timo | Conference Paper |
| 2016 | Towards standardisation of user models for simulation and adaptation purposes
Kaklanis, Nick; Biswas, Pradipta; Mohamad, Yehya; Gonzalez, Mari Feli; Peissner, Matthias; Langdon, Pat; Tzovaras, Dimitrios; Jung, Christoph | Journal Article |
| 2016 | Towards understanding the characteristics of Ag-Al spiking on boron-doped silicon for solar cells
Wöhrle, N.; Lohmüller, E.; Greulich, J.; Werner, S.; Mack, S. | Journal Article |
| 2016 | Understanding process-related efficiency variations of mc-Si PERC cells
Wasmer, S.; Greulich, J.; Höffler, H.; Wöhrle, N.; Rein, S. | Journal Article |
| 2016 | VASCO - digging the dead man's chest of value streams
Berndt, Rene; Silva, Nelson; Caldera, Christian; Krispel, Ulrich; Eggeling, Eva; Sunk, Alexander; Reisinger, Gerhard; Sihn, Wilfried; Fellner, Dieter W. | Journal Article |
| 2016 | VASCO - Mastering the Shoals of Value Stream Mapping
Berndt, Rene; Silva, Nelson; Caldera, Christian; Krispel, Ulrich; Eggeling, Eva; Sunk, Alexander; Edtmayr, Thomas; Sihn, Wilfried; Fellner, Dieter W. | Conference Paper |
| 2016 | Viskoelastische Modellierung des Sinterns von Kunststoffmaterialien
Wohlgemuth, F.; Alig, Ingo | Conference Paper |
| 2016 | Weather sensitivity analyses in layout planning
Bischoff, Martin; Bamberger, Joachim; Fleuren, Tino; Plociennik, Kai; Leitner, Johannes | Conference Paper |
| 2016 | X-Ray microtomography for materials characterization
Hanke, Randolf; Fuchs, Theobald; Salamon, Michael; Zabler, Simon | Book Article |
| 2016 | Young Researchers Symposium, YRS 2016. Proceedings
| Conference Proceedings |
| 2015 | Abschlussbericht zum Verbundprojekt "Safe Networks for Logistics"
Kraft, Volker | Report |
| 2015 | Abschlussbericht zum Verbundprojekt SCD (Supply Chain Design)
Parlings, Matthias | Report |
| 2015 | Adapted parameterization of incomplete ionization in aluminum-doped silicon and impact on numerical device simulation
Steinkemper, H.; Rauer, M.; Altermatt, P.; Heinz, F.D.; Schmiga, C.; Hermle, M. | Journal Article |
| 2015 | Adhesive distribution and global deformation between hybrid joints
Landgrebe, Dirk; Mayer, Bernd; Niese, Stephan; Fricke, Holger; Neumann, Ivo; Ahnert, Maik; Falk, Tobias | Conference Paper |
| 2015 | Are current regionalisation approaches sufficient to decompose electricity demand? – A German case study
Elsland, Rainer; Klingler, Anna-Lena; Degner, Patrick; Oswald, Yannick; Wietschel, Martin | Conference Paper |
| 2015 | Bausteinbasierte Modellierung für die Simulationsgestützte Planung im supply Chain Design
Gadzhanov, Petyo | Presentation |
| 2015 | Berechnung
Iliev, O.; Steiner, K.; Wirjadi, O. | Book Article |
| 2015 | Berechnung und Auslegung von Bauteilen aus Faser-Kunststoff-Verbunden
Lies, Carsten | Presentation |
| 2015 | Berücksichtigung des positionsabhängigen Maschinenverhaltens innerhalb der Simulation
Ihlenfeldt, Steffen; Wabner, Markus; Frieß, Uwe; Tehel, Robert | Journal Article |
| 2015 | Best-practice piloting based on an integrated social media analysis and visualization for E-participation simulation in cities
Burkhardt, Dirk; Nazemi, Kawa; Ginters, Egils | Journal Article, Conference Paper |
| 2015 | BiSE eine Simulationsumgebung für den Biogasprozess
Weinhold, Paul | Master Thesis |
| 2015 | Building intuition of iron evolution during solar cell processing through analysis of different process models
Morishige, A.E.; Laine, H.S.; Schön, J.; Haarahiltunen, A.; Hofstetter, J.; Canizo, C. del; Schubert, M.C.; Savin, H.; Buonassisi, T. | Journal Article |
| 2015 | Characterization and modeling of nanoporous carbon structures
Prill, Torben
: Spies, Martin; Jeulin, Dominique | Dissertation |
| 2015 | Charakterisierung und Simulation des Flugverhaltens von Ersatzbrennstoffen: Grundlage zur Steigerung der Substitution
Krüger, Burkhard; Mrotzek, Asja; Wirtz, Siegmar; Scherer, Viktor | Conference Paper |
| 2015 | A constitutive model for the simulation of the deformation behavior of TWIP steels
Haufe, A.; Erhart, A.; Butz, A. | Conference Paper |
| 2015 | Digitale Werkzeuge in der Fabrikplanung
Lickefett, Michael | Conference Paper |
| 2015 | Discriminating between the SAR signatures of debris and high vegetation
Kuny, Silvia; Hammer, Horst; Schulz, Karsten | Conference Paper |
| 2015 | Domänenspezifische Sprache für ein simulationsunterstütztes Supply Chain Design
Parlings, Matthias; Motta, Marco; Sprenger, Philipp | Conference Paper |
| 2015 | DTIP 2015, 17th Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS
: Benoit, Charlot; Mita, Yoshio; Nouet, Pascal; Pressecq, Francis; Schröpfer, Gerold; Rencz, Marta; Schneider, Peter | Conference Proceedings |
| 2015 | Dynamic simulation of load-dependent hydraulic engine mounts using network models
Troge, Jan; Starobinski, Rudolf; Hofmann, Marcus; Drossel, Welf-Guntram; Knöfel, Björn; Linke, Moritz | Conference Paper |
| 2015 | Eigenspannungen und Verzüge im Laserstrahlschmelzprozess
Töppel, Thomas; Müller, Bernhard; Hoeren, Karlheinz P.J.; Witt, Gerd | Poster |
| 2015 | An empirical approach to parameterizing photovoltaic plants for power forecasting and simulation
Saint-Drenan, Y.-M.; Bofinger, S.; Fritz, R.; Vogt, S.; Good, G.H.; Dobschinski, J. | Journal Article |
| 2015 | ERNEST deckt Fehler schon in der Entwicklungsphase auf
Paulic, Annette | Journal Article |
| 2015 | Evaluating the current EU energy efficiency policy framework and its impact until 2020 and 2030 (1-473-15) (1-473-15)
Schlomann, Barbara; Eichhammer, Wolfgang; Krail, Michael; Reuter, Matthias; Braungardt, Sibylle; Fleiter, Tobias; Kranzl, Lukas | Conference Paper |
| 2015 | Evaluation of various retrofitting concepts of building envelope for offices equipped with large radiant ceiling panels by dynamic simulations
Jordan, S.; Hafner, J.; Kuhn, T.E.; Legat, A.; Zbašnik-Senegačnik, M. | Journal Article |
| 2015 | Evolving traffic scenarios to test driver assistance systems in simulations
Steiner, Torsten | Conference Paper |
| 2015 | Experimental and numerical study on the electro-mechanical behavior of piezoceramic fibers during joining by forming
Drossel, Welf-Guntram; Schubert, Andreas; Koriath, Hans-Joachim; Wittstock, Volker; Peter, Siegfried; Müller, Roland; Müller, Michael; Hensel, Sebastian; Nestler, Matthias; Jahn, Stephan F.; Pierer, Alexander; Müller, Benedikt; Schmidt, Marek | Conference Paper |
| 2015 | Experimental application of simulation tools for evaluating UAV video change detection
Saur, Günter; Bartelsen, Jan | Conference Paper |
| 2015 | Explorative visualization of impact analysis for policy modeling by bonding open government and simulation data
Burkhardt, Dirk; Nazemi, Kawa; Ginters, Egils; Aizstrauts, Artis; Kohlhammer, Jörn | Conference Paper |
| 2015 | FEM-simulation of water vapor ingress into glass-glass-modules with polymeric edge sealant and a new experimental set up for permeation tests for sealing material
Klimm, E.; Piekarczyk, A.; Vogt, F.; Ballion, A.; Weiß, K.-A.; Köhl, M. | Conference Paper |
| 2015 | Generalized propagation of light through optical systems. I. Mathematical basics
Tessmer, Manuel; Gross, Herbert | Journal Article |
| 2015 | Hinterland Transports: Discover Potentials by Simulation
Buhl, Reiner | Presentation |
| 2015 | Hochtemperatur-Werkstoff-Teststrecke II (HWT II) - Begleitende experimentelle und numerische Untersuchungen an Werkstoffen und Komponenten
Hüggenberg, D.; Speicher, M.; Klenk, A.; Zickler, S.; Schwienheer, M.; Wang, Y.; Schmitt, P.; Oesterlin, H.; Maier, G.; Nieweg, B. | Journal Article |
| 2015 | Hybride Breitbandtechnologien aus Sicht der Forschung. Labortests, Simulationen und Praxisrelevanz
Leibiger, Mathias | Presentation |
| 2015 | Impact of initial target position on performance of UAV surveillance using opportunistic resource utilization networks
Lilien, Leszek T.; Othmane, Lotfi ben; Angin, Pelin; Bhargava, Bharat; Salih, Raed M.; DeCarlo, Andrew | Conference Paper |
| 2015 | Impact of Photon Recycling and Luminescence Coupling in III-V Photovoltaic Devices
Walker, A.; Höhn, O.; Micha, D.; Wagner, L.; Helmers, H.; Dimroth, F.; Bett, A. | Conference Paper |
| 2015 | Implementation of a constitutive model for the mechanical behavior of TWIP steels and validation simulations
Erhart, A.; Haufe, A.; Butz, A.; Zapara, M.; Helm, D. | Journal Article |
| 2015 | Implementation, validation and demonstration of the DAPhNE energy efficiency and KPI management simulation module
| Report |
| 2015 | Implementierung eines erweiterten ADM1 Modells zur Simulation von Biogasanlagen
Fuchs, Nico | Master Thesis |
| 2015 | Index-antiguiding in narrow-ridge GaN-based laser diodes investigated by measurements of the current-dependent gain and index spectra and by self-consistent simulation
Redaelli, L.; Wenzel, H.; Piprek, J.; Weig, T.; Einfeldt, S.; Martens, M.; Lükens, G; Schwarz, U.T.; Kneissl, M. | Journal Article |
| 2015 | Influence of the atomization gas in coating processes
Tiedje, Oliver; Ye, Qiaoyan; Shen, Bo | Journal Article |
| 2015 | Interaction of harsh weather operation and collision avoidance in autonomous navigation
Burmeister, Hans-Christoph; Bruhn, Wilko C.; Walther, Laura | Journal Article |
| 2015 | Interactive physically based simulation - efficient higher-order elements, multigrid approaches and massively parallel data structures
Weber, Daniel
: Stork, André (Referent); Fellner, Dieter W. (Referent); Goesele, Michael (Referent) | Dissertation |
| 2015 | Interaktive simulationsgestützte Programmierung bei der Entwicklung mechatronischer Verpackungsanlagen
Stich, Peter; Krotil, Stefan; Reinhart, Gunther | Conference Paper |
| 2015 | Investigating the impact of parameter and process variations on multicrystalline PERC cell efficiency
Wasmer, S.; Greulich, J.; Höffler, H.; Haunschild, J.; Demant, M.; Rein, S. | Conference Paper |
| 2015 | Kinematics and dynamics modeling for real-time simulation of the cable-driven parallel robot IPAnema 3
Tempel, Philipp Thomas; Miermeister, Philipp; Pott, Andreas | Conference Paper |
| 2015 | Knowledge base for intelligent press hardening
Landgrebe, Dirk; Pierschel, Norbert; Schönherr, Julia; Polster, Stefan; Priber, Ulrich; Schieck, Frank | Conference Paper |
| 2015 | KPI-focused Simulation and Management System for Eco-Efficient Design of Energy-Intensive Production Systems
Riexinger, Günther; Holtewert, Philipp; Bruns, Axel; Wahren, Sylvia; Tran, Khoi; Bauernhansl, Thomas | Journal Article, Conference Paper |
| 2015 | Laser Beam Melting for added value in tooling applications
Töppel, Thomas; Müller, Bernhard; Gebauer, Mathias | Presentation |
| 2015 | Machining technologies for multi-materials
Gebhardt, Andreas; Vazquez Martinez, Hector; Mayer, Tim; Beckenlechner, Robert; Esch, Philipp | Conference Paper |
| 2015 | Matrix formalism for light propagation and absorption in thick textured optical sheets
Eisenlohr, J.; Tucher, N.; Höhn, O.; Hauser, H.; Peters, M.; Kiefel, P.; Goldschmidt, J.C.; Bläsi, B. | Journal Article |
| 2015 | Meta-Modellierung und Werkzeug-Integration in der Simulation von Seehafen Container-Terminals
Lange, Ann-Kathrin; Jahn, Carlos; Pirovano, Giovanni; Rossi, Tommaso | Conference Paper |
| 2015 | Mini-review of electron density visualization
Adler, J.; Adler, O.; Kreif, M.; Cohen, O.; Grosso, B.; Hashibon, A.; Cooper, V.R. | Journal Article, Conference Paper |
| 2015 | Modellgestützte Konzeption und Aufbau eines Demonstrators für neuartige keramische fluidische Mischerstrukturen durch Folientechnologie
Körnig, André
: Lange, Rüdiger (Betreuender Hochschullehrer); Bauer, Tobias (Betreuer); Beckert, Wieland (Betreuer); Scheithauer, Uwe (Betreuer) | Thesis |
| 2015 | Modellierung mechanischen Verschleißes an Industriemessern mit Hilfe der Diskreten- und Finiten-Elemente-Methode
Großmann, Uwe | Dissertation |
| 2015 | Modellierung von hochfesten und hochduktilen Blechwerkstoffen aus TWIP-Stahl
Butz, A.; Zapara, M.; Helm, D. | Journal Article |
| 2015 | Modelling of kinematics and dynamics of the IPAnema 3 cable robot for simulative analysis
Tempel, Philipp Thomas; Miermeister, Philipp; Lechler, Armin; Pott, Andreas | Conference Paper |
| 2015 | Modelling of thermal interactions between environment and machine tool
Neugebauer, Reimund; Ihlenfeldt, Steffen; Zwingenberger, Carsten; Glänzel, Janine; Richter, Carsten | Book Article |
| 2015 | Modelling results of covered PVT collectors regarding low-E coatings and F'
Lämmle, M.; Fortuin, S.; Hermann, M.; Kroyer, T. | Conference Paper |
| 2015 | Numerical simulation of carrier-selective electron contacts featuring tunnel oxides
Steinkemper, H.; Feldmann, F.; Bivour, M.; Hermle, M. | Journal Article |
| 2015 | Numerical simulation of residual stresses and deformations in laser beam melting
Töppel, Thomas; Kordaß, Richard; Beyer, Ulrike; Seiderer, J. | Presentation |
| 2015 | Numerics
Iliev, Oleg; Steiner, Konrad; Wirjadi, Oliver | Book Article |
| 2015 | Offshore-Windenergie: Kostensenkung durch Logistiksimulation
Münsterberg, Torsten; Jahn, Carlos | Conference Paper |
| 2015 | On the use of GIS data for realistic SAR simulation of large urban scenes
Hammer, Horst; Kuny, Silvia; Schulz, Karsten | Conference Paper |
| 2015 | Overcoming systematic photocurrent calculation errors in ray tracing simulations
Wöhrle, N.; Greulich, J. | Journal Article, Conference Paper |
| 2015 | Performance availability analysis of autonomous intralogistic systems: An agent-based simulation approach
Güller, Mustafa; Karakaya, Elif; Hegmanns, Tobias | Conference Paper |
| 2015 | Physical simulation- and reconstruction-framework for shape sensing fabrics
Hammacher, Felix
: Rus, Silvia (Betreuer); Kuijper, Arjan (Prüfer) | Master Thesis |
| 2015 | Potentials and limitations of SAR image simulators - a comparative study of three simulation approaches
Balz, Timo; Hammer, Horst; Auer, Stefan | Journal Article |
| 2015 | Semantics visualization - definition, approaches and challenges
Nazemi, Kawa; Burkhardt, Dirk; Ginters, Egils; Kohlhammer, Jörn | Journal Article, Conference Paper |
| 2015 | Simulation and modeling of silicon carbide devices
Uhnevionak, Viktroyia
: Pichler, Peter; Weigel, Robert | Dissertation |
| 2015 | Simulation based application Decision support in Real-time for Efficient Agile Manufacturing (DREAM)
: Lentes, Joachim; Eckstein, Holger; Constantinescu, Carmen; Lanning, Ivor; Rotondo, Anna; Holland, Rob; Robin, Sébastian; Bayer, Martin; Eichert, Jochen; Balkan, Osman; Lange, Olga; Heilmayer, Stefan; Sun, Can | Report |
| 2015 | Simulation based application Decision support in Real-time for Efficient Agile Manufacturing (DREAM)
Lange, Olga; Constantinescu, Carmen | Report |
| 2015 | Simulation des Halbhohlstanznietens von faserverstärkten Kunststoffen
Mattheß, Danilo | Presentation |
| 2015 | Simulation of tape casting: Capabilities and potentials
Polfer, P.; Breinlinger, T.; Kraft, T. | Journal Article |
| 2015 | Simulation of the circular sawing process
Vazquez Martinez, Hector; Hankele, Martin | Presentation |
| 2015 | Simulation of the coating film appearance for spray application
Seeler, Fabian; Hager, Christian; Schneider, Matthias; Tiedje, Oliver | Abstract |
| 2015 | Simulation of urban terrain models using VBS2, TerraTools and FZK Viewer
Häufel, Gisela; Bulatov, Dimitri; Liebelt, Moritz; Solbrig, Peter | Conference Paper |
| 2015 | Simulation of water ingress into PV-modules: IEC-testing versus outdoor exposure
Hülsmann, P.; Weiss, K.-A. | Journal Article |
| 2015 | A Simulation-based Analysis of Supply Chain Resilience
Güller, Mustafa; Koc, Emre; Henke, Michael; Noche, Bernd; Hingst, Lennart | Conference Paper |
| 2015 | Simulation-based concept for increasing robustness in distribution networks
Sardesai, Saskia; Kamphues, Josef; Hegmanns, Tobias | Presentation |
| 2015 | Simulation-based evaluation of operation and maintenance logistics concepts for offshore wind power plants
Münsterberg, Torsten; Jahn, Carlos | Conference Paper |
| 2015 | Simulation. Einführung und Beispiele in Visual Components 3D Automate
Fechter, Manuel | Conference Paper |
| 2015 | Simulation. Einführung und Beispiele in Visual Components 3D Automate
Awad, Ramez | Conference Paper |
| 2015 | Simulationen steigern die Produktivität beim Sägen
Vazquez Martinez, Hector | Journal Article |
| 2015 | Simulationsbasierte Evaluierung eines zeit- und ortsbasierten Pseudonym-Wechsel-Verfahrens für ETSI ITS
Bittl, Sebastian; Schlegel, Marius; Roscher, Karsten | Conference Paper |
| 2015 | Simulationsmethoden zur Unterstützung in der Biomechanik
Ramasamy, Ellankavi; Dorow, Beate; Dennerlein, Florian; Blab, Florian; Starker, Felix; Avci, Okan; Schneider, Urs; Röhrle, Oliver | Presentation |
| 2015 | Simulative Planungsassistenz für die Disposition in mehrstufigen Distributionsnetzwerken
Witthaut, Markus; Kamphues, Josef; Hegmanns, Tobias | Conference Paper |
| 2015 | Technologieorientierte Fabrikplanung
Denner, Timo | Conference Paper |
| 2015 | Theoretical Investigation of Carrier-Selective Contacts Featuring Tunnel Oxides by Means of Numerical Device Simulation
Steinkemper, H.; Feldmann, F.; Bivour, M.; Hermle, M. | Conference Paper, Journal Article |
| 2015 | Thermo-mechanical ball bonding simulation with elasto-plastic parameters obtained from nanoindentation and atomic force measurements
Wright, Alan; Koffel, Stephane; Kraft, Silke; Pichler, Peter; Cambieri, Juri; Minixhofer, Rainer; Wachmann, Ewald | Conference Paper |
| 2015 | Three-dimensional shrinkage behavior of green tapes derived from spherical-shaped powders
Fu, Z.; Polfer, P.; Kraft, T.; Roosen, A. | Journal Article |
| 2015 | Triebstrangmodellierung zur Bestimmung von Frequenzumrichterbelastungen in Windenergieanlagen
Moriße, Marcel; Bartschat, Arne; Mertens, Axel; Wenske, Jan | Poster |
| 2015 | Verteilte Simulation und Emulation von Materialflusssystemen mit dezentraler Steuerung
Daniluk, Damian; Ten Hompel, Michael | Conference Paper |
| 2015 | Virtuelle Lackierung: Von der Anlagenplanung bis zur Qualitätsprognose
Tiedje, Oliver | Journal Article |
| 2015 | YieldOpt, a model to predict the power output and energy yield for concentrating photovoltaic modules
Steiner, M.; Siefer, G.; Hornung, T.; Peharz, G.; Bett, A.W. | Journal Article |
| 2014 | Abschätzung von Muskelkräften aus einem virtuellen Probandengut für die patientenspezifische FEM-Simulation eines Unterkiefers
Müller, Christoph
: Spath, Dieter; Bullinger, Hans-Jörg | Dissertation |
| 2014 | Abschlussbericht zum Verbundprojekt smaRTI - Smart Reusable Transport Items
| Report |
| 2014 | Advanced certificate distribution strategies for secure car-to-X communication with realistic simulations
Aydinli, Berke
: Sigl, Georg (Betreuer); Bittl, Sebastian (Betreuer) | Master Thesis |
| 2014 | Aktuelle Anwendungen von numerischen Simulationen in der Lackierung
Tiedje, Oliver | Conference Paper |
| 2014 | Analysing the lateral series resistance of high-performance metal wrap through solar cells
Greulich, J.; Thaidigsmann, B.; Rein, S. | Journal Article |
| 2014 | Architecture-based simulation of quality attributes in the context of software ecosystems
Flat, Waldemar
: Knauber, Peter (Supervisor); Knodel, Jens (Supervisor) | Master Thesis |
| 2014 | Ausnutzung und Verbesserung der Bake Hardening- und Work Hardening Effekte
Müller, Roland; Birkenstock, Andreas; Mütze, Stefan; Staud, Detlef | Book Article |
| 2014 | Automatic representation of urban terrain models for simulations on the example of VBS2
Bulatov, Dimitri; Häufel, Gisela; Sobrig, Peter; Wernerus, Peter | Conference Paper |
| 2014 | Bifacial n-type silicon solar cells for upconversion applications
Rüdiger, M.; Fischer, S.; Frank, J.; Ivaturi, A.; Richards, B.S.; Krämer, K.W.; Hermle, M.; Goldschmidt, J.C. | Journal Article |
| 2014 | CAD kernel based simulation of milling processes
Klimant, Philipp; Witt, Marco; Kuhl, Michael | Journal Article, Conference Paper |
| 2014 | Combining holistic programming with kinematic parameter optimisation for robot machining
Schneider, Ulrich; Diaz Posada, Julian Ricardo; Drust, Manuel; Verl, Alexander; Zwaag, Johnny van der | Conference Paper |
| 2014 | Context-based automatic reconstruction and texturing of 3D urban terrain for quick-response tasks
Bulatov, Dimitri; Häufel, Gisela; Meidow, Jochen; Pohl, Melanie; Solbrig, Peter; Wernerus, Peter | Journal Article |
| 2014 | Decision support system for inventory policies of complex distribution systems
Li, Cong; Fang, Dianjun | Book Article |
| 2014 | Development of collector integrated sorption modules for solar heating and cooling: Performance simulation
Füldner, G.; Hallström, O.; Spahn, H.-J.; Schnabel, L.; Salg, F. | Conference Paper, Journal Article |
| 2014 | Development, simulation and measurement of functionally integrated piezoelectric mount
Tarle, Polya; Bartel, Thorsten; Gaisbauer, Samuel | Conference Paper |
| 2014 | Efficiency potential simulation for an industrially feasible LFC-PERC concept with sensitivity analysis on crucial cell parameters
Wöhrle, N.; Greulich, J.; Graf, M.; Hermle, M.; Rein, S. | Conference Paper |
| 2014 | Einfluss des Zerstäubergases auf den Beschichtungsprozess
Tiedje, Oliver; Ye, Qiaoyan; Shen, Bo | Journal Article |
| 2014 | ELA bringt Ordnung in den Knoten - Große logistische Knoten im Fokus der angewandten Forschung
Clausen, Uwe; Miodrag, Zoran | Book Article |
| 2014 | Elektromagnetischer Schneidprozess
Scheffler, Christian; Psyk, Verena; Kurka, Petr | Journal Article |
| 2014 | Engineering and implementing software architectural patterns based on feedback loops
Abeywickrama, Dhaminda B.; Hoch, Nicklas; Zambonelli, Franco | Journal Article |
| 2014 | Die Enstehung von Lackfilmstrukturen verstehen
Hilt, Michael; Schneider, Matthias | Journal Article |
| 2014 | Ermittlung der Leistungsverfügbarkeit zellularer Intralogistiksysteme mit Hilfe von Simulations- und VR-Techniken
Rossmann, Juergen; Ten Hompel, Michael; Eilers, Kevin | Conference Paper |
| 2014 | Ermittlung der Leistungsverfügbarkeit zellularer Intralogistiksysteme mit Hilfe von Simulations- und VR-Techniken
Rossmann, Juergen; Ten Hompel, Michael; Eilers, Kevin | Journal Article |
| 2014 | An evaluation environment and methodology for automotive media streaming applications
Protzmann, Robert; Massow, Kay; Radusch, Ilja | Conference Paper |
| 2014 | Exploring simulation in sensor network models
Steiger, Martin; Hutter, Marco; Schader, Philipp; Kohlhammer, Jörn; Kuijper, Arjan | Conference Paper |
| 2014 | ezCar2X. Rapid-Prototyping of Communication Technologies and Cooperative ITS Applications on Real Targets and Inside Simulation Environments
Roscher, Karsten; Bittl, Sebastian; Gonzalez, Arturo; Myrtus, Matthias; Jiru, Josef | Conference Paper |
| 2014 | Fupol simulators and advanced visualization framework integration
Ginters, Egils; Aizstrauts, Artis; Baltruks, Mikelis; Nazemi, Kawa; Burkhardt, Dirk; Sonntagbauer, Peter; Sonntagbauer, Susanne; Gutierrez, Jorge Martin | Conference Paper |
| 2014 | Impact of driving direction on land mobile satellite channel modeling
Rieche, Marie; Arndt, Daniel; Ihlow, Alexander; Pérez-Fontán, Fernando; Galdo, Giovanni del | Conference Paper |
| 2014 | Impact of iron precipitates on carrier lifetime in as-grown and phosphorus-gettered multicrystalline silicon wafers in model and experiment
Kwapil, W.; Schön, J.; Schindler, F.; Warta, W.; Schubert, M. | Journal Article |
| 2014 | Implementation of Fermi-Dirac statistics and advanced models in PC1D for precise simulations of silicon solar cells
Haug, H.; Kimmerle, A.; Greulich, J.; Wolf, A.; Stensrud Marstein, E. | Journal Article, Conference Paper |
| 2014 | Improving machining performance of in-use machine tools with active damping devices
Law, Mohit; Wabner, Markus; Frieß, Uwe; Ihlenfeldt, Steffen; Zander, Georg | Conference Paper |
| 2014 | Industrially-relevant multiscale modelling of hydrogen assisted degradation
Winzer, N.; Stefano, D. di; Mrovec, M.; Katzarov, I.; Paxton, A. | Conference Paper |
| 2014 | Influence of inner skin- and proximity effects on conduction in litz wires
Roßkopf, Andreas; Bär, Eberhard; Joffe, Christopher | Journal Article |
| 2014 | Integration einer Prozesssimulation für die Laseroberflächenbehandlung
Klingbeil, Nils | Book Article |
| 2014 | Integrative port and logistics systems planning
Jahn, Carlos | Presentation |
| 2014 | Intelligente Spritzstrahlreinigung nutzen
Hilt, Michael; Schieweck, Jörg; Tiedje, Oliver | Journal Article |
| 2014 | KMU-gerechte Kapselung von Simulationsmethoden zur logistischen Bewertung und ökologischen Abschätzung von Lieferkonzepten
Cirullies, Jan; Dreßler, Daniel; Schwede, Christian | Conference Paper |
| 2014 | Lärmminderung von Schienenfahrzeugen - Hybride Körperschallbeschreibung einer Bahnklimaanlage
Zumach, Sebastian; Troge, Jan; Knöfel, Björn | Conference Paper |
| 2014 | Less residual stresses in laser beam melting through a holistic approach including laser, scanning, material and machine parameters
Müller, Bernhard; Töppel, Thomas; Kranz, Burkhard; Hoeren, Karlheinz P.J.; Grimm, Tobias; Witt, Gerd | Conference Paper |
| 2014 | Manufacture and testing of thermoelectric modules consisting of BxC and TiOx elements
Feng, Bing; Martin, Hans-Peter; Börner, Floriana-Dana; Lippmann, Wolfgang; Schreier, Max; Vogel, Karin; Lenk, Andreas; Veremchuk, Igor; Dannowski, Marcel; Richter, Christin; Pfeiffer, Peter; Zikoridse, Gennadi; Lichte, Hannes; Grin, Juri; Hurtado, Antonio; Michaelis, Alexander | Journal Article |
| 2014 | Mesh partitioning for parallel garment simulation
Hutter, Marco; Knuth, Martin; Kuijper, Arjan | Conference Paper |
| 2014 | Modeling and testing the mechanical strength of solar cells
Kaule, F.; Wang, W.; Schoenfelder, S. | Journal Article |
| 2014 | Modeling of the Land Mobile Satellite Channel considering the Terminal's Driving Direction
Rieche, Marie; Ihlow, Alexander; Arndt, Daniel; Pérez-Fontán, Fernando; Galdo, Giovanni del | Journal Article |
| 2014 | Multi-scale simulation flow and multi-scale materials characterization for stress management in 3D through-silicon-via integration technologies - effect of stress on 3D IC interconnect reliability
Sukharev, Valeriy; Zschech, Ehrenfried | Conference Paper |
| 2014 | Nachhaltige kommunale Energiesysteme planen und umsetzen auf Basis zeitlich hochaufgelöster Energieszenarien
Stryi-Hipp, G.; Eggers, J.-B. | Conference Paper |
| 2014 | Novel maintenance support system for frame components of forming presses
Ihlenfeldt, Steffen; Riedel, Martin; Wabner, Markus; Tehel, Robert; Tisztl, Marcel; Fischer, Jochen | Conference Paper |
| 2014 | Numerical current density loss analysis of industrially relevant crystalline silicon solar cell concepts
Rüdiger, M.; Steinkemper, H.; Hermle, M.; Glunz, S.W. | Journal Article |
| 2014 | Numerische Simulation der Lackzerstäubung mittels Dampf
Shen, Bo | Conference Paper |
| 2014 | On an improved boron segregation calibration from a particularly sensitive power MOS process
Koffel, S.; Burenkov, A.; Sekowski, M.; Pichler, P.; Giubertoni, D.; Bersani, M.; Knaipp, M.; Wachmann, E.; Schrems, M.; Yamamoto, Y.; Bolze, D. | Journal Article, Conference Paper |
| 2014 | Optimierte Inbetriebnahme durch Simulation
Wabner, Markus; Frieß, Uwe; Hofmann, Stefan; Hellmich, Arvid; Quellmalz, Johannes | Journal Article |
| 2014 | Origins of folding instabilities on polycrystalline metal surfaces
Beckmann, N.; Romero, P.A.; Linsler, D.; Dienwiebel, M.; Stolz, U.; Moseler, M.; Gumbsch, P. | Journal Article |
| 2014 | Parameteridentifikation für thermische Ersatzmodelle durch Einsatz der Infrarotthermografie
Drossel, Welf-Guntram; Ihlenfeldt, Steffen; Zwingenberger, Carsten | Journal Article |
| 2014 | Physikbasierte Simulation von Produktionssystemen
Hefner, Florian; Krotil, Stefan; Stich, Peter; Reinhart, Gunther | Journal Article |
| 2014 | Port terminal planning + simulation. Integration and virtual reality support
Buhl, Reiner | Presentation |
| 2014 | Practical comparison between the finite-element and mesh-free calculation methods in the analysis of machinig simulations
Vazquez Martinez, Hector | Presentation |
| 2014 | Praktische Erfahrungen bei der Appearance-Optimierung auf modellbasierter Grundlage
Schneider, Matthias; Tiedje, Oliver | Conference Paper |
| 2014 | Praktische Erfahrungen bei der modellbasierten Optimierung der Lackfilm-Appearance
Schneider, Matthias | Conference Paper |
| 2014 | Preparing a new data set for earthquake damage detection in SAR imagery: The Christchurch example I
Kuny, Silvia; Hammer, Horst; Schulz, Karsten | Conference Paper |
| 2014 | Preparing a new data set for earthquake damage detection in SAR imagery: The Christchurch example II
Hammer, Horst; Kuny, Silvia; Schulz, Karsten | Conference Paper |
| 2014 | Prozessoptimierung für erhöhte Effizienz
Denner, Timo | Conference Paper |
| 2014 | Prozessoptimierung für erhöhte Effizienz
Denner, Timo | Conference Paper |
| 2014 | Rohbiogas flexibel erzeugen
Martens, Thilo; Wagner, Marcel | Journal Article |
| 2014 | ScenarioTools Real-Time Play-Out for Test Sequence Validation in an Automotive Case Study
Brenner, Christian; Greenyer, Joel; Holtmann, Jörg; Liebel, Grischa; Stieglbauer, Gerald; Tichy, Matthias | Journal Article, Conference Paper |
| 2014 | Simulation - Simulating patient specific loads in avatars
Schneider, Urs; Dorow, Beate; Ramasamy, Ellankavi; Starker, Felix; Dennerlein, Florian; Röhrle, Oliver; Budaker, Bernhard | Presentation |
| 2014 | Simulation der Teilereinigung - ein Zwischenstand des Projekts ReinSim
Schieweck, Jörg | Conference Paper |
| 2014 | Simulation des Presshärtens unter Berücksichtigung der induktiven Bauteilerwärmung
Scheffler, Christian | Presentation |
| 2014 | Simulation des Tröpfchenaufpralls - Untersuchung zu Lufteinschlüssen
Ye, Qiaoyan | Conference Paper |
| 2014 | Simulation of AsH3 plasma immersion ion implantation into silicon
Burenkov, Alex; Lorenz, Jürgen; Spiegel, Yohann; Torregrosa, Frank | Conference Paper |
| 2014 | Simulation of subsea gas hydrate exploitation
Janicki, Georg; Schlüter, Stefan; Hennig, Torsten; Deerberg, Görge | Abstract |
| 2014 | Simulation of the 3D Sound Propagation and Radiation of a Railway Air Conditioning Unit based on Transfer Matrix Techniques
Troge, Jan; Starobinski, Rudolph; Drossel, Welf-Guntram; Kunze, Holger; Linke, Moritz; Knöfel, Björn | Conference Paper |
| 2014 | Simulation of the prosthetic gait with a six-axis robot. Prostethic test procedures based on real-world biomechanical data
Dennerlein, Florian; Blab, Florian; Starker, Felix; Schneider, Urs | Presentation |
| 2014 | A simulation study of ad hoc networking of UAVs with opportunistic resource utilization networks
Lilien, Leszek T.; Othmane, Lotfi ben; Angin, Pelin; DeCarlo, Andrew; Salih, Raed M.; Bhargava, Bharat | Journal Article |
| 2014 | Simulation und Applikation eines Helmholtz-Resonators an einem Stranggranulator unter Verwendung einer akustischen Netzwerkbeschreibung
Troge, Jan; Drossel, Welf-Guntram; Kunze, Holger; Kreuz, Ulrich; Stockmann, Erich; Linke, Moritz | Conference Paper |
| 2014 | Simulation und Offline-Programmierung
Awad, Ramez | Conference Paper |
| 2014 | Simulation von Logistikprozessen in Offshore-Basishäfen zur Errichtung von Offshore-Windparks
Jahn, Carlos; Münsterberg, Torsten; Fleischhauer, Marc | Conference Paper |
| 2014 | Simulation von Oberflächendefekten mittels Raytracing zur Bestimmung der Fehlerauffindwahrscheinlichkeit
Rauhut, Markus; Spies, Martin; Jablonski, Andreas | Conference Paper |
| 2014 | Simulation, Planung und Auslegung von Seilrobotern
Schmidt, Valentin; Pott, Andreas | Conference Paper |
| 2014 | Simulation-based hybrid approach to robust multi-echelon inventory policies for complex distribution networks
Fang, Dianjun; Li, Cong | Journal Article |
| 2014 | Special issue WGP: "Assembly, Handling and Industrial Robotics"
Kuhlenkötter, Bernd; Franke, Jörg; Schüppstuhl, Thorsten; Verl, Alexander | Journal Article |
| 2014 | Standardvorgehen zur Validierung einer Methodik zur Reduzierung von Energieverschwendung sowie deren anschließende praktische Anwendung
Wersching, Thomas
: Schnellbach, Peter | Master Thesis |
| 2014 | Structural integration of PZT fibers in deep drawn sheet metal for material-integrated sensing and actuation
Müller, Benedikt; Müller, Michael; Hensel, Sebastian; Nestler, Matthias; Jahn, Stephan F.; Wittstock, Volker; Schubert, Andreas; Drossel, Welf-Guntram | Conference Paper |
| 2014 | Structural integration of PZT fibers in deep drawn sheet metal for material-integrated sensing and actuation
Müller, Benedikt; Müller, Michael; Hensel, Sebastian; Nestler, Matthias; Jahn, Stephan F.; Wittstock, Volker; Schubert, Andreas; Drossel, Welf-Guntram | Journal Article, Conference Paper |
| 2014 | Submarine gas hydrate reservoir simulations - a gas/liquid fluid flow model for gas hydrate containing sediments
Schlüter, Stefan; Hennig, Torsten; Janicki, Georg; Deerberg, Görge | Conference Paper |
| 2014 | Surface recombination parameters of interdigitated-back-contact silicon solar cells obtained by modeling luminescence images
Padilla, M.; Höffler, H.; Reichel, C.; Chu, H.; Greulich, J.; Rein, S.; Warta, W.; Hermle, M.; Schubert, M.C. | Journal Article |
| 2014 | Technologieorientierte Fabrikplanung
Denner, Timo | Conference Paper |
| 2014 | Technologieorientierte Fabrikplanung
Denner, Timo | Conference Paper |
| 2014 | Teilprojekt 5.1.1 "Lackverlustfreie Beschichtung"
DeRossi, Umberto; Fritz, Hans-Georg; Tiedje, Oliver; Weichsel, Christian; Woll, Bernhard | Book Article |
| 2014 | Towards efficient methodologies for rapid-prototyping of communication technologies and cooperative ITS applications
Bittl, Sebastian; Roscher, Karsten | Presentation |
| 2014 | Trockneroptimierungen im Green Carbody-Projekt
Pulli, Karlheinz | Conference Paper |
| 2014 | Ultraschall-Simulation für komplexe Bauteile mittels ABCD-Methodologie
Dobrovolskij, Dascha | Conference Paper |
| 2014 | Untersuchungen zum Eigenspannungs- und Verzugsverhalten beim Laserstrahlschmelzen
Kordaß, Richard
: Töppel, Thomas | Master Thesis |
| 2014 | Untersuchungen zur thermisch bedingten Werkstückverformung
Semmler, Ulrich; Bräunig, Michael; Putz, Matthias; Schmidt, Gerhard; Wittstock, Volker | Journal Article |
| 2014 | Verbesserung der Oberflächenqualität und Produktivität durch simulative Optimierung und Anwendung aktiver Dämpfer
Wabner, Markus | Conference Paper |
| 2014 | Virtual validation of automotive software intensive systems
Feth, Patrik
: Liggesmeyer, Peter (Supervisor); Bauer, Thomas (Supervisor) | Master Thesis |
| 2014 | Virtuelle Inbetriebnahme im Maschinen- und Anlagenbau
Neyrinck, Adrian; Neher, Philipp
: Verl, Alexander (Hrsg.); Bauernhansl, Thomas (Hrsg.) | Conference Proceedings |
| 2014 | Wie beeinflusst die Blech-Topografie das Lackierergebnis?
Schneider, Matthias | Conference Paper |
| 2014 | Wie kommt die Luft in den Lack?
Hilt, Michael; Tiedje, Oliver; Ye, Qiaoyan | Journal Article |
| 2013 | 3D simulation and process optimization of laser assisted milling of Ti6Al4V
Zamani, Hassan; Hermani, Jan-Patrick; Sonderegger, Bernhard; Sommitsch, Christof | Conference Paper, Journal Article |
| 2013 | 3D-simulation model to predict the formation of paint film surface structures
Schneider, Matthias; Hager, Christian; Strohbeck, Ulrich; Tiedje, Oliver | Conference Paper |
| 2013 | Abschlussbericht zum Verbundprojekt SCP ( Supply Chain Planning) im Leitthema Logistics-as-a-Service
Hegmanns, Tobias; Kamphues, Josef; Besenfelder, Christoph; Koc, Emre; Akbas, Kemal; Müller, Tobias; Orlob, Judith; Tickwe, Ralf; Bös, Mathias | Report |
| 2013 | Air cargo - the hidden opportunity in supply chains
Frye, Heinrich | Presentation |
| 2013 | Alternative Zerstäubergase beim Beschichten
Tiedje, Oliver; Shen, Bo; Ye, Qiaoyan | Presentation |
| 2013 | Application of tool-specific simulation algorithms to Memristor models written in Modelica
Majetta, Kristin; Clauß, Christoph; Schmidt, Torsten; Tetzlaff, Ronald | Conference Paper |
| 2013 | Auf dem Weg zur wissensbasierten Simulation von Fertigungsprozessen
Westkämper, Engelbert | Journal Article |
| 2013 | Beiträge zur systematischen Körperschallbeschreibung von verkoppelten Strukturen
Seifert, Jonathan | Bachelor Thesis |
| 2013 | Characterization of waste materials for optimizing aerodynamic separation steps
Krüger, Burkhard; Mrotzek, Asja; Wirtz, Siegmar | Presentation |
| 2013 | Constrained sintering of alumina stripe patterns on rigid substrates: Effect of stripe geometry
Jamin, C.; Rasp, T.; Kraft, T.; Guillon, O. | Journal Article |
| 2013 | Deep drawing of metal sheets with integrated piezo-metal substructures
Neugebauer, Reimund; Schubert, Andreas; Drossel, Welf-Guntram; Lachmann, Lutz; Koriath, Hans-Joachim; Jahn, Stephan F.; Nestler, Matthias; Hensel, Sebastian; Müller, M.; Müller, B. | Conference Paper |
| 2013 | Depletion of boron-doped surfaces protected with barrier layers during POCL3-diffusion
Lohmüller, E.; Werner, S.; Schön, J.; Thanas, M.; Mack, S.; Wolke, W.; Wolf, A.; Clement, F.; Biro, D. | Conference Paper |
| 2013 | Design and evaluation tool for operations and maintenance logistics concepts for offshore wind power plants
Münsterberg, Torsten; Rauer, Robert; Jahn, Carlos | Journal Article |
| 2013 | Design of heat treatment processes for a tailored set of properties on 22MnB5 steel alloy sheets - simulation and experiments
Meza-Garcia, Enrique; Mosel, Andre; Shchus, Yury; Rautenstrauch, Anja; Lachmann, Lutz; Schieck, Frank; Drossel, Welf-Guntram | Conference Paper |
| 2013 | Development of a material model for visco-elastic abrasive medium in abrasive flow machining
Uhlmann, Eckart; Doits, M.; Schmiedel, Christian | Conference Paper, Journal Article |
| 2013 | Development of an alternative heating method for manganese boron steel
Bester, Alwyn | Dissertation |
| 2013 | Discrete element method sintering simulation
Wonisch, A.; Rasp, T.; Kraft, T.; Riedel, H. | Book Article |
| 2013 | Discrete element study on the influence of initial coordination numbers on sintering behaviour
Rasp, T.; Kraft, T.; Riedel, H. | Journal Article |
| 2013 | Effect of stress state on the failure behavior of a dual phase steel
Andrieux, F.; Sun, D.-Z.; Feucht, M. | Conference Paper |
| 2013 | Effects of random number generators on V2X communication simulation
Protzmann, Robert; Schünemann, Björn; Radusch, Ilja | Conference Paper |
| 2013 | Efficiency in logistics facilities
Clausen, Uwe; Baudach, Jens; Diekmann, Daniel; Goedicke, Ina; Miodrag, Zoran; Tesch, Christian; Voll, Robert; Winter, Katharina; Wohlgemuth, Sascha | Book Article |
| 2013 | Enhancement of a static performance optimization tool
Abdul Rahman, Omar; Kuch, Benjamin | Journal Article |
| 2013 | Entwicklung einer Simulationsumgebung für die Orthopädie
Dorow, Beate; Ramasamy, Ellankavi; Röhrle, Oliver; Schneider, Urs | Journal Article |
| 2013 | Entwicklung eines integrierten Ansatzes für das Störungsmanagement in komplexen Transportnetzen unter Berücksichtigung variabler Störungsdauern
Dreßler, Daniel; Beißert, Ulrike | Conference Paper |
| 2013 | ERNEST - framework for the early verification and validation of networked embedded systems
Kamphausen, Benjamin; Stante, Alexander; Zeller, Marc; Weiß, Gereon | Conference Paper |
| 2013 | Erweiterte Integration energetischer Betrachtungen in der Materialflusssimulation
Schlegel, Andreas; Stoldt, Johannes; Putz, Matthias | Conference Paper |
| 2013 | ESPResSo++: A modern multiscale simulation package for soft matter systems
Halverson, Jonathan D.; Brandes, Thomas; Lenz, Olaf; Arnold, Axel; Bevc, Stas; Starchenko, Vitaliy; Kremer, Kurt; Stuehn, Torsten; Reith, Dirk | Journal Article |
| 2013 | Experimentelle und simulative Beschreibung der thermodynamischen Vorgänge in einem Gar-/Gärraum zur gezielten Auslegung und Prozessführung
Kühlmuß, Siegfried | Bachelor Thesis |
| 2013 | FERAL - Framework for Simulator Coupling on Requirements and Architecture Level
Kuhn, Thomas; Forster, Thomas; Braun, Tobias; Gotzhein, Reinhard | Conference Paper |
| 2013 | Fluidische Kühlung von Motorspindeln und Werkzeugen
Semmler, Ulrich; Schmidt, Gerhard; Weber, Jürgen; Weber, Juliane | Conference Paper |
| 2013 | Fügen durch Umformen
Menzel, Sandra; Israel, Markus; Kraus, Christian | Journal Article |
| 2013 | Generic energy-enhancement module for consumption analysis of manufacturing processes in discrete event simulation
Stoldt, Johannes; Schlegel, Andreas; Franz, Enrico; Langer, Tino; Putz, Matthias | Conference Paper |
| 2013 | Grundlagenprüfstand für Spanungsprozesse mit bestimmter Schneide
Brockmann, Matthias; Klocke, Fritz; Semmler, Ulrich; Schmidt, Gerhard | Conference Paper |
| 2013 | High-level design process for NATO high assurance ABAC guard
Wrona, Konrad; Oudkerk, Sander; Hein, Christian; Menz, Nadja; Ritter, Tom | Conference Paper |
| 2013 | The importance of modern material characterisation methods in energy efficient sheet metal forming process development
Weigel, Patricia; Bester, Alwyn; Demmler, Matthias; Müller, Roland | Conference Paper |
| 2013 | Increased upconversion quantum yield in photonic structures due to local field enhancement and modification of the local density of states - a simulation-based analysis
Herter, B.; Wolf, S.; Fischer, S.; Gutmann, J.; Bläsi, B.; Goldschmidt, J.C. | Journal Article |
| 2013 | Increasing energy efficiency through simulation-driven process evaluation
Stoldt, Johannes; Neumann, Daniel; Langer, Tino; Putz, Matthias; Schlegel, Andreas | Conference Paper |
| 2013 | Influence of argon flow rate on melt convection and incorporation of SiC in multicrystalline silicon
Schmid, C.; Schumann, M.; Haas, F.; Riepe, S. | Conference Paper |
| 2013 | Integration of environmental criteria into simulation-based postponement decisions
Cirullies, Jan; Klingebiel, Katja; Scavarda, L.F.; Ceryno, P. | Conference Paper |
| 2013 | Integriert Planen - mit Visualisierung, Simulation und Optimierung zum effizienten Logistiksystem
Jahn, Carlos | Presentation |
| 2013 | Integrierte wirkstellennahe Kühlschmierstoffzufuhr
Schmidt, Gerhard | Journal Article |
| 2013 | Ein integriertes Verfahren zur robusten statistischen Auswertung von Simulationsergebnissen in der Produktion
Wagner, Frank | Dissertation |
| 2013 | An interoperable and inclusive user modeling concept for simulation and adaptation
Biswas, Pradipta; Kaklanis, Nick; Mohamad, Yehya; Peissner, Matthias; Langdon, Pat; Tzovaras, D.; Jung, Christoph | Book Article |
| 2013 | Lackfilm-Strukturbildung bei der Spritzlackier-Applikation
Hager, Christian; Westkämper, Engelbert; Schneider, Matthias | Conference Paper |
| 2013 | Lackfilm-Strukturbildung bei der Spritzlackier-Applikation
Hager, Christian
: Westkämper, Engelbert (Hauptberichter) | Dissertation |
| 2013 | Lackieranlagen durch Simulationen effizient planen
Hilt, Michael; Tiedje, Oliver | Journal Article |
| 2013 | Lackiertechnisches Know-how für das Glasieren nutzen
Hilt, Michael; Tiedje, Oliver | Journal Article |
| 2013 | Luftströmung und Lösemittelausbreitung in Lackierkabinen. Von der Schreinerei bis zum Automobilwerk
: Tiedje, Oliver (Referent); Ye, Qiaoyan | Presentation |
| 2013 | Managing complexity in supply chains: A discussion of current approaches on the example of the semiconductor industry
Aelker, Judith; Bauernhansl, Thomas; Ehm, Hans | Conference Paper, Journal Article |
| 2013 | Manufacturing of optimized venturi nozzles based on technical-economic analysis
Fritz, Florian; Häfele, Steffen; Traut, Alexander; Eckerle, Michael | Conference Paper |
| 2013 | Method for situation-based modeling and simulation of assembly systems
Neumann, Michael; Westkämper, Engelbert | Conference Paper, Journal Article |
| 2013 | Methode zur situationsbasierten Modellierung und Simulation von Produktionssystemen
Neumann, Michael; Westkämper, Engelbert | Conference Paper |
| 2013 | Methodology and data-structure for a uniform system's specification in simulation projects
Kardos, Csaba; Popovics, Gergely; Kádár, Botond; Monostori, László | Conference Paper, Journal Article |
| 2013 | Mit numerischer Simulation zu effizienter Lacktrockung
Pulli, Karlheinz | Presentation |
| 2013 | Modellierung des Wärmeaustauschs Maschine-Umgebung
Drossel, Welf-Guntram; Ihlenfeldt, Steffen; Zwingenberger, Carsten; Großmann, Knut; Schroeder, S. | Conference Paper |
| 2013 | Modellierung und Simulation von Schädigungen beim Pulverpressen
Schmidt, I.; Trondl, A.; Kraft, T. | Conference Paper |
| 2013 | Numerical Study on Air Entrapment in Droplets under Impact onto a Solid Surface
Ye, Qiaoyan; Tiedje, Oliver | Presentation |
| 2013 | Numerische Bestimmung von Materialunsicherheiten in Sandwichtragwerken mit ungeordneter Mikrostruktur im Schaumkern
Beckmann, C.; Hohe, J. | Conference Paper |
| 2013 | On the thermo-mechanical modelling of a ball bonding process with ultrasonic softening
Wright, A.; Koffel, S.; Pichler, P.; Enichlmair, H.; Minixhofer, R.; Wachmann, E. | Conference Paper |
| 2013 | Oxidation - Verderb oder Schutz
Zimmermann, J. | Conference Paper |
| 2013 | Painting by numbers
Ye, Qiaoyan; Tiedje, Oliver | Journal Article |
| 2013 | Die perfekte Vernetzung
Schieweck, Jörg; Schneider, Matthias; Hänsel, Andreas | Journal Article |
| 2013 | Photonic structures for enhanced upconversion
Herter, B.; Wolf, S.; Fischer, S.; Gutmann, J.; Bläsi, B.; Goldschmidt, J.C. | Conference Paper |
| 2013 | Physikbasierte Simulation im Anlagenentstehungsprozess - Einsatzpotenziale bei der Entwicklung automatisierter Montageanlagen im Automobilbau
Drescher, Benny; Stich, Peter; Kiefer, Jens; Strahilov, Anton; Bär, Thomas; Reinhart, Gunther | Conference Paper |
| 2013 | Potenziale des Sonderanlagenbaus
Schwanzer, Peter | Conference Paper |
| 2013 | Predictive simulation of doping processes for silicon solar cells
Schön, J.; Abdollahinia, A.; Müller, R.; Benick, J.; Hermle, M.; Warta, W.; Schubert, M.C. | Journal Article, Conference Paper |
| 2013 | Eine prozess- und IT-gestützte Methode für die Produktionsplanung in der Automobilindustrie
Liebler, Klaus
: Kuhn, Axel (Hrsg.); Sihn, W. (Hrsg.) | Dissertation |
| 2013 | Range-extender in electric vehicles - a revival of (highly optimized) two-stroke engines on a small scale
Nagel, Alexander; Thäter, Stefan; Steinhilper, Rolf | Conference Paper |
| 2013 | Robotik in der Neurorehabilitation - Chancen und Risiken
Schneider, Urs | Journal Article, Conference Paper |
| 2013 | ROS introduction
Weißhardt, Florian | Conference Paper |
| 2013 | Scenario-based dimensioning of the actuator of parallel cable-driven robots
Kraus, Werner; Pott, Andreas | Conference Paper |
| 2013 | Serviceorientierte Referenzarchitektur für Logistische Assistenzsysteme zur simulationsbasierten Entscheidungsunterstützung
Zajac, Markus | Presentation |
| 2013 | Serviceorientierte Referenzarchitektur für Logistische Assistenzsysteme zur simulationsbasierten Entscheidungsunterstützung
Kamphues, Josef; Groß, Sven; Korth, Benjamin; Zajac, Markus; Hegmanns, Tobias | Conference Paper |
| 2013 | Simulating an innovative austenitization process developed for hot stamping
Bester, Alwyn; Meinel, Stefan; Müller, Roland; Neugebauer, Reimund | Conference Paper |
| 2013 | Simulation der lasergestützten Zerspanung mit Marc
Semmler, Ulrich; Schmidt, Gerhard; Dix, Martin | Presentation |
| 2013 | Simulation des Einflusses der Gelenke auf das statische und dynamische Verhalten von parallelkinematischen Werkzeugmaschinen
Kolouch, Martin | Dissertation |
| 2013 | Simulation des Prothesengangs mittels eines Sechs-Achs-Roboters
Starker, Felix; Dennerlein, Florian; Blab, Florian; Schneider, Urs | Journal Article |
| 2013 | Simulation of natural gas production from submarine gas hydrate
Janicki, Georg; Schlüter, Stefan; Hennig, Torsten; Deerberg, Görge | Journal Article, Conference Paper |
| 2013 | Simulation of natural gas production from submarine gas hydrate deposits combined with CO2 storage
Janicki, Georg; Schlüter, Stefan; Hennig, Torsten; Deerberg, Görge | Poster |
| 2013 | Simulation of the sound radiation of an air conditioning unit from a railway vehicle using transfermatrix techniques
Linke, Moritz; Starobinski, Rüdiger; Drossel, Welf-Guntram; Troge, Jan; Kunze, Holger; Knöfel, Björn | Conference Paper |
| 2013 | Simulation with plastic material models for high thermomechanical loads
Vazquez Martinez, Hector | Presentation |
| 2013 | Simulation, development, and testing of a triaxial vibration isolation platform
Bartel, Thorsten; Koch, Thorsten; Matthias, Michael | Conference Paper |
| 2013 | A simulation- and metaheuristic-based approach for inventory optimization of complex distribution systems
Fang, Dianjun; Li, Cong | Conference Paper |
| 2013 | Simulation-based design and evaluation of O&M logistics concepts for offshore wind power plants
Jahn, Carlos; Münsterberg, Torsten | Conference Paper |
| 2013 | Simulation-based optimization of personnel assignment planning in sequenced commercial vehicle assembly: A software tool for iterative improvement
Mayrhofer, Walter; März, Lothar; Sihn, Wilfried | Journal Article, Conference Paper |
| 2013 | Simulations- und VR-basierte Steuerungsverifikation zellularer Intralogistiksysteme
Roßmann, Jürgen; Ten Hompel, Michael; Eilers, Kevin | Conference Paper |
| 2013 | Simulations- und VR-basierte Steuerungsverifikation zellularer Intralogistiksysteme
Rossmann, Juergen; Ten Hompel, Michael; Eilers, Kevin | Journal Article |
| 2013 | Simulationsgestützte Entwicklungsumgebung für Prothesenfüße
Ramasamy, Ellankavi; Dorow, Beate; Dennerlein, Florian; Blab, Florian; Starker, Felix; Schneider, Urs; Röhrle, Oliver | Conference Paper |
| 2013 | Simulationstraining auf der Schulbank
Hilt, Michael; Schieweck, Jörg | Journal Article |
| 2013 | Simulative Untersuchung von Kreissägeblättern
Heisel, Uwe; Stehle, Thomas; Birenbaum, Christoph; Ghassemi, Hadi | Journal Article |
| 2013 | Surface open corrosive wall thinning effects
Pérez Blanco, Isabel Christina; Dobmann, Gerd | Conference Paper |
| 2013 | Test data for die attach lifetime modeling
Kraft, Silke | Conference Paper |
| 2013 | Test procedures and simulation model calibration strategies for nonlinear stiffness behavior of joints in large-scale structures
Hensel, Sebastian; Jesche, Fred; Neugebauer, Reimund; Mauermann, Reinhard | Conference Paper |
| 2013 | Thermohydraulische Simulation von Luftkollektoren und Luftkollektorsystemen
Welz, C.; Knecht, M.; Lauro, P. di; Maurer, C.; Stryi-Hipp, G.; Hermann, M. | Conference Paper |
| 2013 | Towards forward dynamics simulations using 3D continuum-mechanical skeletal muscle models
Sprenger, Michael; Schmitt, Syn; Röhrle, Oliver | Abstract |
| 2013 | Trends und Perspektiven in der Lackiertechnik
Hilt, Michael; Tiedje, Oliver | Journal Article |
| 2013 | Two-dimensional modeling of a SOFC stack repeating unit
Schöne, Jakob; Beckert, Wieland; Ganzer, Gregor; Pönicke, Andreas; Michaelis, Alexander | Conference Paper |
| 2013 | Verifying & validating non-functional properties of automotive software architectures in early design stages
Stante, Alexander; Kamphausen, Benjamin; Zeller, Marc; Weiß, Gereon | Conference Paper |
| 2013 | Vorhersage der Rückfederung beim Umformen von nichtrostendem Edelstahl
Tritschler, M. | Journal Article |
| 2013 | Werkzeugauslegung für das elektromagnetische Fügen
Psyk, Verena; Scheffler, Christian; Drossel, Welf-Guntram | Journal Article |
| 2013 | Wertschöpfungsverteilung in globalen Produktionsnetzwerken
Abdul Rahman, Omar; Schatz, Anja; Kuch, Benjamin | Journal Article |
| 2012 | "Innovationsalianz Green Carbody Technologies" - Planung der Niedrigenergie-Produktion
Langer, Tino | Presentation |
| 2012 | Actuator and sensor performance of piezo-metal-composites
Drossel, Welf-Guntram; Hensel, Sebastian; Nestler, Matthias; Lachmann, Lutz; Neugebauer, Reimund | Conference Paper |
| 2012 | Ad-hoc model acquisition for combat simulation in urban terrain
Bulatov, Dimitri; Solbrig, Peter; Wernerus, Peter | Conference Paper |
| 2012 | Akustische Modellierung der Schallanstrahlung eines Bahnklimagerätes
Truxa, Philipp | Master Thesis |
| 2012 | Analysis of the scatter of a deploying airbag
Brown, Richard; Bloomfield, Mike; Thole, Clemens-August; Nikitina, Lialia | Conference Paper |
| 2012 | Applying model-reconstruction by exploring MES and PLC data for simulation support of production systems
Pfeiffer, András; Kádár, Botond; Popovics, Gergely; Kardos, Csaba; Vén, Zoltán; Kemény, Lorinc; Monostori, László | Conference Paper |
| 2012 | Automatic model generation for virtual commissioning of specialized production machines
Westkämper, Engelbert; Baudisch, Thomas; Schlögl, Wolfgang; Frank, Gernot | Journal Article |
| 2012 | Automatic simulation model generation based on PLC codes and MES stored data
Popovics, Gergely; Pfeiffer, András; Kádár, Botond; Vén, Zoltán; Kemény, Lorinc; Monostori, László | Conference Paper |
| 2012 | Automatische Parameteranpassung: Voraussetzung für eine effiziente Produktion
Schmid, Martin | Conference Paper |
| 2012 | Beitrag zur numerischen Beschreibung des funktionellen Verhaltens von Piezoverbundmodulen
Kranz, Burkhard | Dissertation |
| 2012 | Beyond human tetris: Simulation-based optimization of personnel assignment planning in sequenced commercial vehicle assembly
März, Lothar; Mayrhofer, Walter; Sihn, Wilfried | Conference Paper |
| 2012 | Bond order potentials for fracture, wear, and plasticity
Pastewka, L.; Mrovec, M.; Moseler, M.; Gumbsch, P. | Journal Article |
| 2012 | Cast iron cutting with nano TiN and multilayer TiN-CrN coated inserts
Semmler, Ulrich; Perucca, Massimo; Comoglio, Mauro; Fuentes, Gonzalo G.; Almandoz, Eluxka; Rüger, Carlo | Conference Paper |
| 2012 | CNC-Produktion
Freiberger, Stefan; Rosemann, Bernd | Book Article |
| 2012 | Combining simulation and optimization to improve LTL traffic
Clausen, Uwe; Goedicke, Ina; Mest, Larissa; Wohlgemuth, Sascha | Journal Article, Conference Paper |
| 2012 | Correlation-aware analysis of the impact of process variations on circuit behavior
Burenkov, Alex; Baer, Eberhard; Lorenz, Juergen; Kampen, Christian | Conference Paper |
| 2012 | Design and simulation - virtual orthopedic lab
Röhrle, Oliver; Ramasamy, Ellankavi; Dorow, Beate; Schneider, Urs | Conference Paper |
| 2012 | Developing a model for the bond heel lifetime prediction of thick aluminium wire bonds
Merkle, L.; Sonner, M.; Petzold, M. | Journal Article |
| 2012 | Durch numerische Simulation Nasslackierprozesse optimieren
Tiedje, Oliver | Presentation |
| 2012 | Effiziente und sichere Planung von Lackierkabinen mit Trockenabscheidung durch numerische Simulationen
Tiedje, Oliver; Ye, Qiaoyan; Röckle, Jürgen; Möckel, Dieter | Conference Paper |
| 2012 | Energieeinsparung ohne Genauigkeits- und Produktivitätsverlust
Nestmann, Steffen | Journal Article |
| 2012 | Ensuring urban supply by enhancing logistics productivity of large factory sites
Miodrag, Zoran; Tesch, Christian; Clausen, Uwe | Conference Paper |
| 2012 | Entwicklung fahrdynamischer Steuergerätefunktionen eines Elektrofahrzeuges, am Beispiel von Torque Vectoring eines einzelradgetriebenen Allradfahrzeuges, im Maßstab 1:5
Bucher, Dennis
: Klein, Hermann (Betreuer); Engelhardt, Daniel (Betreuer) | Master Thesis |
| 2012 | Evaluation of robustness of a multi-echelon inventory model for complex distribution systems
Fang, Dianjun; Li, Cong | Conference Paper |
| 2012 | Extending the V2X simulation environment VSimRTI with advanced communication models
Protzmann, Robert; Mahler, Kim; Oltmann, Konstantin; Radusch, Ilja | Conference Paper |
| 2012 | Flexible Echtzeitsimulationsumgebung für optische Schüttgutsortierung
Heintz, Rüdiger; Struck, Günter; Burkhard, Matthias | Conference Paper |
| 2012 | Funktionelle Elektrostimulation in der Rehabilitation, Modellierung und Simulation
Schneider, Urs; Röhrle, Oliver | Presentation |
| 2012 | Grain growth and the puzzle of its stagnation in thin films: A detailed comparison of experiments and simulations
Barmak, Katayun; Eggeling, Eva; Sharp, Richard; Roberts, Scott; Shyu, Terry; Sun, Tik; Yao, Bo; Ta'asan, Shlomo; Kinderlehrer, David; Rollett, Anthony; Coffey, Kevin | Conference Paper |
| 2012 | Größenanalyse an nicht separierten Holzpartikeln mit regionenbildenden Algorithmen am Beispiel von OSB-Strands
Plinke, B. | Dissertation |
| 2012 | An improved electrical and thermal model of a microbolometer for electronic circuit simulation
Würfel, Daniel; Vogt, Holger | Journal Article, Conference Paper |
| 2012 | An integrated approach to robust multi-echelon inventory policy decision
Klingebiel, Katja; Li, Cong | Book Article |
| 2012 | Integration von Simulationsverfahren für Schulungszwecke
Schieweck, Jörg | Conference Paper |
| 2012 | IVIsion - Entwicklungs- und Berechnungswerkzeug für Fahrzeuglängsdynamik und Betriebsstrategien
Saroch, Lars | Conference Paper |
| 2012 | Lackierprozesse ressourceneffizient gestalten: Optimierung der Overspray-Trockenabscheidung mithilfe der numerischen Simulation
Tiedje, Oliver; Ye, Qiaoyan | Book Article |
| 2012 | Learning behavior models for hybrid timed systems
Niggemann, Oliver; Stein, Benno; Maier, Alexander; Vodencarevic, Asmir; Kleine Büning, H. | Conference Paper |
| 2012 | Luftfracht als Wirtschafts- und Standortfaktor
Frye, Heinrich | Presentation |
| 2012 | Maßrahmenbau mit CFK "Von der Vermessung zum fertigen Produkt"
Ellert, Florian | Presentation |
| 2012 | Materials and manufacturing technology for the fabrication of bioinspired artifical vascular systems
Borchers, Kirsten; Bierwisch, Claas; Engelhard, Sascha; Graf, Careen; Jaeger, Raimund; Kluger, Petra; Krüger, Hartmut; Meyer, Wolfdietrich; Novosel, Esther; Refle, Oliver; Schuh, Christian; Seiler, Nadine; Tovar, Günter E.M.; Wegener, Michael; Ziegler, Tobias | Conference Paper |
| 2012 | Messmethoden zur Sprühstrahlcharakterisierung
Tiedje, Oliver | Conference Paper |
| 2012 | Method for multi-scale modelling and simulation of assembly systems
Neumann, Michael; Constantinescu, Carmen; Westkämper, Engelbert | Conference Paper |
| 2012 | Methode zur frühen virtuellen Inbetriebnahme von Steuerprogrammen durch halbautomatische Maschinenmodellbildung
Schob, Uwe | Dissertation |
| 2012 | Methode zur situationsbezogenen Modellierung und Simulation von Montagesystemen
Neumann, Michael | Presentation |
| 2012 | Mit numerischer Simulation Lackierprozesse verbessern
: Verl, Alexander (Hrsg.); Bauernhansl, Thomas (Hrsg.) | Conference Proceedings |
| 2012 | Mit numerischer Simulation zu effizienter Lacktrocknung
Hilt, Michael; Pulli, Karlheinz | Journal Article |
| 2012 | Model updating of machine tools
Neugebauer, Reimund; Kolouch, Martin; Richter, Markus; Wittstock, Volker; Saha, S.N. | Conference Paper, Journal Article |
| 2012 | Modeling boron profiles in silicon after pulsed excimer laser annealing
Hackenberg, M.; Huet, K.; Negru, R.; Venturini, J.; Fisicaro, G.; La Magna, A.; Pichler, P. | Conference Paper |
| 2012 | Modell-basierte Bestimmung der Auffindwahrscheinlichkeit (POD) von Volumenfehlern in schwerprüfbaren Bauteilen
Spies, Martin; Rieder, Hans; Dillhöfer, Alexander | Conference Paper |
| 2012 | Modellbasierte Optimierung der Lackfilm-Appearance
Schneider, Matthias | Conference Paper |
| 2012 | Neue Trocknerkonzepte aus numerischen Simulationen
Pulli, Karlheinz | Conference Paper |
| 2012 | Numerical and experimental studies on the clinch-bonding and riv-bonding process
Neugebauer, Reimund; Israel, Markus; Mayer, Bernd; Fricke, Holger | Conference Paper |
| 2012 | Oberflächen innovativ vorbehandeln und beschichten: Neue Potenziale in der Airless-Applikation
Tiedje, Oliver; Ye, Qiaoyan; Shen, Bo | Book Article |
| 2012 | OTD-NET based simulation evaluation of (R, Q) inventory policies for complex distribution systems
Li, Cong; Fang, Dianjun | Conference Paper |
| 2012 | Overspray - neue Entwicklungen zur Ressourceneffizienz
Tiedje, Oliver | Conference Paper |
| 2012 | Oversprayarme Beschichtung - aktuelle Forschung zur Ressourcen-Effizienz
Tiedje, Oliver; Ye, Qiaoyan | Journal Article |
| 2012 | Die Partikelabscheidung im Lack-Overspray-Kollektor vorhersagen
Hilt, Michael; Ye, Qiaoyan | Journal Article |
| 2012 | Planung von Robotersystemen in der Intralogistik
Wöltje, Kay | Conference Paper |
| 2012 | Port terminal planning. ...and a "green" container terminal layout
Buhl, Reiner | Presentation |
| 2012 | Predictive theory for the grain boundary character distribution
Barmak, Katayun; Eggeling, Eva; Emelianenko, Maria; Epshteyn, Yekaterina; Kinderlehrer, David; Sharp, Richard; Ta'asan, Shlomo | Conference Paper |
| 2012 | Press hardening - on innovative and challenging technology
Neugebauer, Reimund; Schieck, Frank; Polster, Stefan; Mosel, Andre; Rautenstrauch, Anja; Schönherr, Julia; Pierschel, Norbert | Conference Paper |
| 2012 | Real-time 3D-simulation tool for ultrasonic transducers used in aeroengine component inspections
Spies, Martin; Dillhöfer, Alexander; Rieder, Hans; Dobrovolskij, Dascha | Conference Paper |
| 2012 | Salzsprühnebelverteilung in Korrosionsprüfkammern
Ye, Qiaoyan | Conference Paper |
| 2012 | Schallfelder von Phased-Array Prüfköpfen: Vergleich von photoelastischen Messungen und Simulationen
Schmitte, Till; Orth, Thomas; Spies, Martin; Kersting, Thomas | Conference Paper |
| 2012 | Separation of Refused Derived Fuels (RDF) in a fluidised bed - simulation of RDF-particle properties and flow conditions
Krüger, Burkhard; Mrotzek, Asja; Marzi, Thomas; Wirtz, Siegmar | Conference Paper |
| 2012 | Simulation and modelling of transport networks and logistics nodes
Clausen, Uwe; Diekmann, Daniel; Goedicke, Ina; Kaffka, Jan; Meier, Fabian; Thaller, Carina | Presentation |
| 2012 | Simulation method for LWIR radiation distribution using a visual ray-tracer
Utz, Alexander; Gendrisch, Lutz; Weiler, Dirk; Kolnsberg, Stephan; Vogt, Holger | Journal Article, Conference Paper |
| 2012 | Simulation methods for inductively coupled sensor systems in varying environments
Jacobi, Rebekka Carmen; Hennig, Andreas; Kolossa, Dorothea | Conference Paper |
| 2012 | Simulation of Adaptive Structures Made of Textile and Shape Memory Alloy
Drossel, Welf-Guntram; Ohsenbrügge, Christoph; Oschatz, H.; Rotsch, Christian; Senf, Björn | Presentation |
| 2012 | Simulation of submarine gas hydrate deposits as a sustainable energy
Janicki, Georg; Hennig, Torsten; Schlüter, Stefan; Deerberg, Görge | Journal Article, Conference Paper |
| 2012 | Simulation of submarine gas hydrate deposits as a sustainable energy source and CO2 storage
Janicki, Georg; Hennig, Torsten; Schlüter, Stefan; Deerberg, Görge | Presentation |
| 2012 | Simulation und Validierung eines optimierten Phased-Array-Verfahrens zur Querfehlerprüfung von SAWL-Schweißnähten in ferritischen Rohren
Orth, Thomas; Schmitte, Till; Spies, Martin; Rieder, Hans; Kersting, Thomas | Conference Paper |
| 2012 | Simulationsbasierte Planung modularer Paneellinien
Wanner, Martin-Christoph; Sender, Jan | Journal Article |
| 2012 | Simulationsbasierte Untersuchung der Eigenschaften von Bauteilen aus Kupfer am Beispiel der Fertigungskette von Solarzellenverbindern
Butz, A.; Meier, R.; Helm, D. | Journal Article |
| 2012 | Simulationstraining zur Optimierung von UV-Anlagen in der Oberflächentechnik
Schieweck, Jörg; Schneider, Matthias; Hänsel, Andreas | Journal Article |
| 2012 | Solving modeling problems with machine learning - a classification scheme of model learning approaches for technical systems
Niggemann, Oliver; Stein, B.; Maier, A. | Conference Paper |
| 2012 | SPS/IPC/DRIVES 2012
: Frey, Georg (Hrsg.); Schumacher, Walter (Hrsg.); Verl, Alexander (Hrsg.); Höpf, Michael (Komitee) | Conference Proceedings |
| 2012 | Stärker durch gutes Engineering
Verl, Alexander | Journal Article |
| 2012 | Theoretical and experimental aspects of paint film leveling
Hager, Christian; Schneider, Matthias; Strohbeck, Ulrich | Presentation |
| 2012 | Towards a living earth simulator
Paolucci, M.; Kossman, D.; Conte, R.; Lukowicz, P.; Argyrakis, P.; Blandford, A.; Bonelli, G.; Anderson, S.; Freitas, S. de; Edmonds, B.; Gilbert, N.; Gross, Markus; Kohlhammer, Jörn; Koumoutsakos, P.; Krause, A.; Linner, B.-O.; Slusallek, P.; Sorkine, O.; Sumner, R.; Helbing, D. | Journal Article |
| 2012 | Uniform Data Structure for Production Simulation
Popovics, Gergely; Kardos, Csaba; Kemény, Lorinc; Gyulai, Dávid; Monostori, László | Conference Paper |
| 2012 | Variantenmanagement in Refabrikationsunternehmen: Assemble-To-order zur Beherrschung der Prozessvariantenvielfalt
Haumann, Michael; Seifert, Sandra; Westermann, Hans-Henrik; Butzer, Steffen | Journal Article |
| 2012 | Virtual factory framework - HOMAG industrial use case
Abdul Rahman, Omar; Riexinger, Günther; Doll, Ulrich | Conference Paper |
| 2012 | Virtual prototyping of davits with parameterized simulation models and virtual reality
Mesing, Benjamin; König, Christian R.; Lukas, Uwe von; Tietjen, Thorsten; Vinke, Andree | Conference Paper |
| 2012 | Vorhersage der Rückfederung bei der Kaltumformung von Titanblechen
Tritschler, M.; Butz, A. | Journal Article |
| 2012 | Wärmeübertragung an Fugenkontakten am Beispiel spanender Werkzeuge
Kneer, Reinhold; Vieler, Sarah; Semmler, Ulrich; Bräunig, Michael | Conference Paper |
| 2012 | Weniger Versuche bis zum perfekten Verlauf
Schneider, Matthias; Hager, Christian; Strohbeck, Ulrich; Tiedje, Oliver | Journal Article |
| 2012 | Werkstoffcharakterisierung und Simulation
Müller, Roland | Conference Paper |
| 2012 | ZfP in der maritimen Industrie zwischen Ökonomie, Human Factor und Ökologie
Rieder, Hans; Dillhöfer, Alexander; Spies, Martin | Conference Paper |
| 2012 | Zur Nachhaltigkeit der Beschichtungstechnik
Hilt, Michael | Presentation |
| 2011 | 2-D SPICE simulation and analytical calculation of spreading resistance effects in emitter wrap-through cells with nonsquare via-hole pattern
Fallisch, A.; Biro, D. | Journal Article |
| 2011 | 3D Schallfeldcharakterisierung niederfrequenter Ultraschall-Prüfköpfe in Beton - Experimentelle Untersuchungen und Simulation
Maack, Stefan; Spies, Martin; Hillemeier, Bernd | Conference Paper |
| 2011 | 3D simulation of sputter etching with the Monte-Carlo approach
Kunder, D. | Dissertation |
| 2011 | Advanced calculation of static and dynamic stiffness in mechatronic machine tools
Neugebauer, Reimund; Scheffler, Christian; Wabner, Markus; Zwingenberger, Carsten | Journal Article |
| 2011 | Aerodynamische Charakterisierung von Ersatzbrennstoffen
Krüger, Burkhard; Wirtz, Siegmar | Presentation |
| 2011 | Aspekte der Energieeffizienz von Vorschubantrieben in Werkzeugmaschinen
Frieß, U.; Wabner, M.; Lütz, N. | Journal Article |
| 2011 | Auf den Punkt genau
Mevenkamp, A.; Schneiders, F.; Wibbeling, S. | Journal Article |
| 2011 | Ausweitung der simwebapp auf andere Anwendungsgebiete
Henke, Jürgen | Conference Paper |
| 2011 | Beitrag zur simulationsgestützten Konzeptplanung von heterogen strukturierten Kommissioniersystemen
Venn, E. | Dissertation |
| 2011 | CFD-Berechnung von Luftströmungen und Partikelabscheidung in Lackieranlagen mit Filtersystem
Shen, Bo; Ding, Yuhui; Ye, Qiaoyan; Tiedje, Oliver | Conference Paper |
| 2011 | Design and model studies for solid-state power amplification at 210 GHz
Diebold, S.; Kallfass, I.; Massler, H.; Seelmann-Eggebert, M.; Leuther, A.; Tessmann, A.; Pahl, P.; Koch, S.; Ambacher, O. | Journal Article |
| 2011 | Design and optimization of plants and components for the production of polyurethane foams
Brodbeck,Carsten; Landvogt, Bettina | Conference Paper |
| 2011 | Die Düsenführung simulieren
Scheibe, Andreas; Schieweck, Jörg; Schneider, Matthias | Journal Article |
| 2011 | Dynamic aspects of character rendering in the context of multimodal dialog systems
Jung, Yvonne
: Fellner, Dieter W. (Referent); Stricker, Didier (Referent) | Dissertation |
| 2011 | Effizienter Einsatz der Materialflusssimulation in der Werftplanung
Wanner, Martin-Christoph; Sender, Jan | Journal Article |
| 2011 | Einführung in die Anwendung "SimWebApp" anhand eines Fallbeispiels
Wimpff, Daniel-Percy | Conference Paper |
| 2011 | Electron and hole accumulation in InN/InGaN heterostructures
Lebedev, V.; Polyakov, V.M.; Knübel, A.; Aidam, R.; Kirste, L.; Cimalla, V.; Granzner, R.; Schwierz, F.; Ambacher, O. | Journal Article, Conference Paper |
| 2011 | Energie nachhaltig reduzieren: Innovative Lackieranlagen für Schienenfahrzeuge
Ondratschek, Dieter | Journal Article |
| 2011 | Energy efficient storage systems in the DC link for the drive unit of machine tools
Neugebauer, Reimund; Kolesnikov, A.; Richter, M. | Conference Paper |
| 2011 | Entwicklung eines Verfahrens zur Kopplung von Erdgasgewinnung aus maritimen Methanhydratlagerstätten und CO2-Speicherung - Modellierung und Simulation
Janicki, Georg; Schlüter, Stefan; Deerberg, Görge; Hennig, Thorsten | Poster |
| 2011 | Ergonomische Gestaltung eines Entladearbeitsplatzes mittels CAD-Simulation
Meinken, Katrin; Braun, Martin; Dehlke, Jens; Montnacher, Joachim; Panteljuk, Olga | Book Article |
| 2011 | Evaluating evacuation simulation results in a virtual reality environment
Mesing, Benjamin; Kluwe, Florian; Lukas, Uwe von | Conference Paper |
| 2011 | Experiments and simulation of the diffusion and activation of the n-Type dopants P, As, and Sb implanted into germanium
Koffel, S.; Kaiser, R.J.; Bauer, A.J.; Amon, B.; Pichler, P.; Lorenz, J.; Frey, L.; Scheiblin, P.; Mazzocchi, V.; Barnes, J.-P.; Claverie, A. | Journal Article, Conference Paper |
| 2011 | Extraction of natural gas from subsea gas hydrate deposits coupled with CO2 storage - Modeling and simulation
Janicki, Georg; Schlüter, Stefan; Hennig, Torsten; Deerberg, Görge | Abstract |
| 2011 | Filter-Optimierung der Lackabscheidung
Ye, Qiaoyan | Conference Paper |
| 2011 | Flexible integration of VR-based tools and simulation applications for the planning and optimization of factories and manufacturing processes
Constantinescu, Carmen | Book Article |
| 2011 | The functional mockup interface for tool independent exchange of simulation models
Blochwitz, T.; Neidhold, T.; Otter, M.; Arnold, M.; Bausch, C.; Monteiro, M.; Clauß, C.; Wolf, S.; Elmqvist, H.; Olsson, H.; Junghanns, A.; Mauss, J.; Neumerkel, D.; Peetz, J.-V. | Conference Paper |
| 2011 | Gekoppelte Simulation von Material- und Energieflüssen in der Automobilfertigung
Putz, Matthias; Schlegel, Andreas; Lorenz, Sören; Franz, Enrico; Schulz, Stephan | Conference Paper |
| 2011 | Grundlagen der numerischen Simulation in Lackierprozessen
Ye, Qiaoyan | Conference Paper |
| 2011 | GUIDE: Creating accessible TV applications
Duarte, Carlos; Langdon, Pat; Jung, Christoph; Coelho, Jose; Biswas, Pradipta; Hamisu, Pascal | Conference Paper |
| 2011 | In Zukunft virtuell lackieren: Durch Simulation Beschichtungsprozesse absichern
Schweizer, Silvia; Ondratschek, Dieter; Jost, Jürgen | Journal Article |
| 2011 | Innovatives Werkzeug spart Planungszeiten
Ondratschek, Dieter | Journal Article |
| 2011 | Integration of a PDDL planning framework into the multi-agent simulation system LAMPSys
Höller, Daniel; Mies, Christoph | Conference Paper |
| 2011 | Integration of ecological criteria into the dynamic assessment of order penetration points in logistics networks
Cirullies, J.; Klingebiel, K.; Scarvarda, L.F. | Conference Paper |
| 2011 | Integrative Simulation von Werkzeugmaschine und Fertigungstechnologie
Brecher, Christian; Klocke, Fritz; Lohse, Wolfram; Cabral, Gustavo Francisco; Rasim, Matthias; Triebs, Johannes; Minoufekr, Meysam; Bäumler, Stephan; Bergs, Thomas; Herfs, Werner; Glasmacher, Lothar; Wegner, Hagen | Book Article |
| 2011 | Lackierprozesse durch den Einsatz der numerischen Simulation planen und nachhaltig verbessern
Stinglwagner, Andrea | Journal Article |
| 2011 | Lackierprozesse numerisch simulieren: Lackiersimulation angepasst und wirtschaftlich einsetzen
Tiedje, Oliver; Ye, Qiaoyan | Book Article |
| 2011 | Lackierprozesse numerisch simulieren: Simulation der Lackschichttrocknung mit Konvektion und Strahlung
Schneider, Matthias; Ye, Qiaoyan | Book Article |
| 2011 | Lackiersimulationen an Aufgabenstellung angepasst einsetzen
Ondratschek, Dieter | Journal Article |
| 2011 | Lackiersimulationen sinnvoll einsetzen
: Tiedje, Oliver (Referent) | Presentation |
| 2011 | Die Lackiertechnik im Aufwind: Innovative Entwicklungen auf dem Weg zur wirtschaftlichen Lackierung von Holzprodukten
Hoffmann, Ulrich | Journal Article |
| 2011 | Local energy balancing demand for Germany
Wrobel, Patrick; Beyer, Daniel | Poster |
| 2011 | Mehr Energieeffizienz in Roboteranwendungen
Müller, Verena; Spiller, Alexander; Verl, Alexander | Journal Article |
| 2011 | Modeling micro-movement variability in mobility studies
Hecker, D.; Körner, C.; Stange, H.; Schulz, D.; May, M. | Conference Paper |
| 2011 | Möglichkeiten und Anwendung von E-Learning-Konzepten in der beruflichen Qualifizierung für die ZfP am Beispiel der Ultraschallprüfung
Rieder, Hans; Dillhöfer, Alexander; Spies, Martin | Conference Paper |
| 2011 | Multiphysics simulations for the optimisation of CMOS processes for high precision optical measurement applications
Hochschulz, F.; Paschen, U.; Vogt, H. | Journal Article, Conference Paper |
| 2011 | Nummerische Simulation des Spritzlackierens: Vorhersage von Overspray- und Lösemittelausbreitung
Ye, Qiaoyan; Shen, Bo; Schneider, Matthias | Conference Paper |
| 2011 | On-site evaluation of large components using SAFT and TOFD ultrasonic imaging
Spies, M.; Rieder, H.; Dillhöfer, A. | Conference Paper |
| 2011 | Optimierung von Konvektionstrocknungsvorgängen
Pulli, Karlheinz | Conference Paper |
| 2011 | Optimized multi-echelon inventory policies in robust distribution networks
Klingebiel, K.; Li, C. | Conference Paper |
| 2011 | Planning of high precision surgery at the lateral skull base
Wesarg, Stefan; Becker, Meike; Hakimi, Wissam el | Conference Paper |
| 2011 | Planung und Optimierung von Lackierprozessen durch numerische Simulationen
: Verl, Alexander (Hrsg.); Bauernhansl, Thomas (Hrsg.); Tiedje, Oliver (Sitzungsleitung) | Conference Proceedings |
| 2011 | Planung und virtuelle Inbetriebnahme von Steuerungen für Intralogistiksysteme
Seidel, Stephan; Haufe, Jürgen; Donath, Ulrich; Ille, Frank | Conference Paper |
| 2011 | Quantitative comparison of simulated and experimental silver crystal formation at the interface of silver thick film contacts on n-type silicon
Kontermann, S.; Ruf, A.; Preu, R. | Conference Paper, Journal Article |
| 2011 | Reducing the model generation effort for the virtual commissioning of control programs
Neugebauer, Reimund; Schob, U. | Journal Article |
| 2011 | Routing in heterogeneous car-to-X environments
Wörle, Lukas
: Gehrsitz, Thomas; Roscher, Karsten (Betreuer) | Thesis |
| 2011 | Semantic web based dynamic energy analysis and forecasts in manufacturing engineering
Wenzel, K.; Riegel, J.; Schlegel, A.; Putz, M. | Conference Paper |
| 2011 | simKMU - Internet- und webbasierte Simulationsdienste - Abschlussbericht
: Wimpff, Daniel-Percy (Projektleiter); Seitz, Stefan (Mitarb.); Ergin, Tamer (Mitarb.); Rommel, Steve (Mitarb.); Hermann, Marco (Mitarb.) | Report |
| 2011 | simKMU - Internet- und webbasierte Simulationsdienste - Abschlussbericht Tl.2
: Wimpff, Daniel-Percy (Projektleiter); Seitz, Stefan (Mitarb.); Ergin, Tamer (Mitarb.); Rommel, Steve (Mitarb.); Hermann, Marco (Mitarb.) | Report |
| 2011 | Simulating far-infrared scenarios with the radiance synthetic imaging system
Utz, A.; Gendrisch, L.; Vogt, H. | Journal Article |
| 2011 | Simulation in der industriellen Teile-Reinigung
Schieweck, Jörg | Conference Paper |
| 2011 | Simulation of CH4 production from subsea gas hydrate deposits coupled with CO2 storage
Janicki, Georg; Schlüter, Stefan; Henning, Thorsten; Deerberg, Görge | Poster |
| 2011 | Simulation of CH4 production from subsea gas hydrate deposits coupled with CO2 storage
Janicki, Georg; Schlüter, Stefan; Henning, Thorsten; Deerberg, Görge | Conference Paper |
| 2011 | Simulation of plasma immersion ion implantation
Burenkov, A.; Pichler, P.; Lorenz, J.; Spiegel, Y.; Duchaine, J.; Torregrosa, F. | Conference Paper |
| 2011 | Simulation of the stopping behavior of industrial robots using a complementarity-based approach
Dietz, Thomas; Verl, Alexander | Conference Paper |
| 2011 | Simulation und Validierung der lokalen Wärmebehandlung und Umformung von hochfesten Stählen für den Karosseriebau
Müller, R.; Heyde, M. | Presentation |
| 2011 | Simulationsmethoden zur Lackzerstäubung entwickeln und Prozesse optimieren
Ondratschek, Dieter | Journal Article |
| 2011 | Splines auf Tetraederpartitionen für physikalisch basierte Deformationssimulation
Müller, Constantin
: Stork, André (Betreuer); Weber, Daniel (Betreuer) | Bachelor Thesis |
| 2011 | Spritzlackiergeräte systematisch bewerten
Ondratschek, Dieter | Journal Article |
| 2011 | SPS/IPC/DRIVES 2011
: Bender, Klaus (Hrsg.); Schumacher, Walter (Hrsg.); Verl, Alexander (Hrsg.); Höpf, Michael (Komitee) | Conference Proceedings |
| 2011 | Standardisation of user models for designing and using inclusive products
Mohamad, Y.; Biswas, P.; Langdon, P.; Peissner, M.; Dangelmaier, M.; Jung, C.; Wolf, P.; Kaklanis, N. | Conference Paper |
| 2011 | State space modeling of non-proportional passive damping in machine tools
Neugebauer, Reimund; Scheffler, C.; Wabner, M.; Schulten, M. | Journal Article |
| 2011 | Transparent tetragonal yttria-stabilized zirconia ceramics: Influence of scattering caused by birefringence
Klimke, J.; Trunec, M.; Krell, A. | Journal Article |
| 2011 | Umsetzung neuer organischer Funktionalbeschichtungen
Ondratschek, Dieter | Conference Paper |
| 2011 | Unterschiedliche Werkstoffe prozesssicher verbinden. Simulation von Hybridfügeprozessen
Fricke, H.; Israel, M. | Journal Article |
| 2011 | UV-Lacke auf komplexen Kunststoffbauteilen effizient aushärten
Ondratschek, Dieter | Journal Article |
| 2011 | Virtual reality for AAL services interaction design and evaluation
Sala, Pilar; Kamieth, Felix; Mocholí, Juan Bautista; Naranjo, Juan-Carlos | Conference Paper |
| 2010 | Advanced state space modeling of non-proportional damped machine tool mechanics
Neugebauer, Reimund; Scheffler, C.; Wabner, M.; Schulten, M. | Journal Article |
| 2010 | Approach for iterative validation of automotive embedded systems
Weiß, Gereon; Zeller, Marc; Eilers, D.; Knorr, Rudi | Conference Paper |
| 2010 | Bestimmung von Strukturmerkmalen und Materialeigenschaften von stahlfaserverstärkten Reifen mittels Röntgen- und Ultraschallverfahren
Spies, M.; Redenbach, T.; Rieder, H.; Herkt, S. | Conference Paper |
| 2010 | Cutting force model for analysis of burr formation in drilling process
Leopold, J.; Matsumura, T. | Conference Paper |
| 2010 | Design methods for 3D IC integration
Schneider, P.; Reitz, S.; Stolle, J.; Martin, R.; Heinig, A.; Wilde, A. | Conference Paper |
| 2010 | Development of a simulation model for multimodal, cross-company logistics networks
Prochazka, M. | Conference Paper |
| 2010 | Dickblechclinchen - Innovatives Fügeverfahren für den Stahlbau
Israel, M.; Jesche, F.; Mauermann, R.; Trojer, A. | Journal Article |
| 2010 | Digital statistical analysis using VHDL
Dietrich, M.; Eichler, U.; Haase, J. | Conference Paper |
| 2010 | Ein Duo für die Hydraulik
| Journal Article |
| 2010 | Dynamic modeling and hardware-in-the-loop simulation for the cable-driven parallel robot IPAnema
Miermeister, Philipp; Pott, Andreas; Verl, Alexander | Conference Paper |
| 2010 | Effiziente Planung und Entwicklung von Automatisierungslösungen
: Westkämper, Engelbert (Hrsg.); Verl, Alexander (Hrsg.) | Conference Proceedings |
| 2010 | Elasto-geometrical modeling and calibration of redundantly actuated PKMs
Ecorchard, G.; Neugebauer, Reimund; Maurine, P. | Journal Article |
| 2010 | Entwicklung einer Bewertungsmethodik für den sommerlichen Wärmeschutz auf der Basis des nach DIN V 18599 rechnerisch ermittelten Nutzkältebedarfs
Höttges, K.; Kempkes, C. | Report |
| 2010 | Evolution of mechanical response and dislocation microstructures in small-scale specimens under slightly different loading conditions
Senger, J.; Weygand, D.; Motz, C.; Gumbsch, P.; Kraft, O. | Journal Article |
| 2010 | The factory of emotions - simulating production and logistics in virtual worlds
Seitz, Stefan; Hermann, Marco | Conference Paper |
| 2010 | Fertigungssichere Holzlackierung durch Anwendung der numerischen Simulation
Hoffmann, Ulrich | Journal Article |
| 2010 | A framework for automation the generating of machine simulation models
Schob, U. | Conference Paper |
| 2010 | Ganzheitliche Versorgungsplanung mithilfe der Digitalen Logistik
Toth, M.; Wagenitz, A. | Journal Article |
| 2010 | Gear rolling technology
Neugebauer, Reimund; Hellfritzsch, U.; Lahl, M.; Schiller, S.; Milbrandt, M. | Presentation |
| 2010 | Geschäftsprozess-Simulation
Rabe, M.; Knothe, T. | Book Article |
| 2010 | Graphene - mechanical properties and applications
Tonner, Friedemann | Conference Paper |
| 2010 | Graphene - mechanical properties and applications
Tonner, Friedemann | Conference Paper |
| 2010 | High-temperature modeling of AlGaN/GaN HEMTs
Vitanov, S.; Palankovski, V.; Maroldt, S.; Quay, R. | Journal Article, Conference Paper |
| 2010 | Impact of n-type doping on the terahertz surface emission from c-plane InN
Polyakov, V.M.; Cimalla, V.; Lebedev, V.; Schwierz, F. | Journal Article, Conference Paper |
| 2010 | In virtuellen Räumen real planen
Dürr, Mark; Lickefett, Michael | Journal Article |
| 2010 | Innovations in rolling process of helical gears
Neugebauer, Reimund; Hellfritzsch, U.; Lahl, M.; Schiller, S.; Milbrandt, M. | Conference Paper |
| 2010 | Integrated production program and human resource allocation planning of sequenced production lines with simulated assessment
März, L.; Tutsch, H.-J.; Auer, S.; Sihn, W. | Conference Paper |
| 2010 | Lackierprozesse numerisch simulieren
Scheibe, Andreas | Book Article |
| 2010 | Learning factory
Westkämper, Engelbert | Conference Paper |
| 2010 | Lokale Laserbehandlung zur Steigerung der Crash-Belastbarkeit von Karosseriebauteilen
Jahn, A.; Heitmanek, M.; Standfuß, J.; Brenner, B.; Donat, B.; Wunderlich, G.; Mickel, P.; Vogel, T. | Conference Paper |
| 2010 | Long-term capacity planning in the shipbuilding industry
Wanner, Martin-Christoph; Sender, Jan; Kothe, Ulrich; Bohnenberg, Ralf | Conference Paper |
| 2010 | Mikrostrukturentwicklung in Walzprozessen am Beispiel von DC04
Bienger, P.; Helm, D. | Conference Paper |
| 2010 | Minifabrik für Kleinteilemontage
Knoch, Sandra; Schöning, Sebastian; Bengel, Matthias; Blümlein, Nikolaus | Journal Article |
| 2010 | Mit der numerischen Simulation Spritzlackierprozesse optimieren
Ondratschek, Dieter | Journal Article |
| 2010 | Modeling and simulation of burr formation: State-of-the-art and future trends
Leopold, J.; Wohlgemuth, R. | Conference Paper |
| 2010 | Modeling approaches for electroactive polymers
Kaal, W.; Herold, S.; Melz, T. | Conference Paper |
| 2010 | Modellentwicklung zum Schädigungsverhalten beschichteter Umformwerkzeuge
Neugebauer, Reimund; Hochmuth, C.; Schmidt, G.; Oppermann, C. | Journal Article, Conference Paper |
| 2010 | Modelling and real-time dynamic simulation of the cable-driven parallel robot IPAnema
Miermeister, Philipp; Pott, Andreas | Conference Paper |
| 2010 | Molecular dynamics study of plastic deformation of nanocrystalline palladium
Bachurin, DV.; Gumbsch, P. | Book Article |
| 2010 | Multiphysics simulation for the optimisation of CMOS processes for high precision optical measurement applications
Hochschulz, F.; Paschen, U.; Vogt, H. | Conference Paper |
| 2010 | Numerische Simulation: Ein effektives Tool
Ondratschek, Dieter | Journal Article |
| 2010 | Nummerische Simulation. Virtuelle Versuche sparen Zeit und Geld
Ondratschek, Dieter | Journal Article |
| 2010 | Optimization and simulation of operating strategies for container terminals
Kaffka, J.; Clausen, U.; Chmielewski, A.; Schütte, T. | Conference Paper |
| 2010 | Particle dynamics simulation and diagnostics of the PECVD processes in fluorocarbon rf discharges
Barz, J.P. | Dissertation |
| 2010 | Praxis Materialflusssimulation
Kuhn, A.; Wagenitz, A.; Klingebiel, K. | Book Article |
| 2010 | Production monitoring and control systems within the digital factory
Schleipen, Miriam; Sauer, O.; Friess, N.; Braun, L.; Shakerian, K. | Conference Paper |
| 2010 | Production simulation in virtual worlds
Seitz, Stefan; Hermann, Marco; Wimpff, Daniel-Percy | Conference Paper |
| 2010 | Die Rolle der "Digitalen Fabrik" im zeitgemäßen Unternehmensmanagement
Westkämper, Engelbert | Conference Paper |
| 2010 | Simulation der kontrollierten Gewinnung von Erdgas aus maritimen Methanhydratlagerstätten und der CO2-Sequestrierung
Janicki, Georg; Schlüter, Stefan; Henning, Thorsten; Deerberg, Görge | Poster |
| 2010 | Simulation des Lost Foam-Gießverfahrens
Wöstmann, F.-J.; Schmidt, D.; Pleteit, H. | Journal Article |
| 2010 | Simulation of focused ion beam etching by coupling a topography simulator and a Monte-Carlo sputtering yield simulator
Kunder, D.; Baer, E.; Sekowski, M.; Pichler, P.; Rommel, M. | Journal Article, Conference Paper |
| 2010 | Simulation of sustainability aspects within the industrial environment and their implication on the simulation technique
Rabe, M.; Jäkel, F.-W.; Weinaug, H. | Conference Paper |
| 2010 | Simulation of the spray coating process using a pneumatic atomizer
Ye, Qiaoyan; Pulli, Karlheinz | Conference Paper |
| 2010 | Simulation of the stopping behavior of industrial robots
Dietz, Thomas; Pott, Andreas; Verl, Alexander | Conference Paper |
| 2010 | Simulation und Optimierung eines Fokussensors in einem optisch-deflektometrischen Messsystem
Grothaus, Sebastian | Bachelor Thesis |
| 2010 | Simulationswerkzeuge zur Rekonfiguration von Produktionsanlagen
Zapp, Matthias | Journal Article |
| 2010 | Die Stromnetze der Zukunft werden intelligent
Holeczek, Harald | Journal Article |
| 2010 | Sustainable and energy-efficient logistics through the conceptual design and evaluation of cross-company logistics models
Sihn, W.; Meizer, F.; Kuhlang, P.; Matyas, K.; März, L. | Conference Paper |
| 2010 | Systematisches und durchgängiges Engineering von Fabriken, Anlagen und Prozessen
Constantinescu, Carmen | Conference Paper |
| 2010 | Thermal effects of the chip removal process and ways of mastering them
Neugebauer, Reimund; Ihlenfeldt, S.; Nestmann, S.; Schmidt, G.; Blau, P.; Richter, C. | Conference Paper |
| 2010 | Trends in manufacturing execution systems
Sauer, O. | Conference Paper |
| 2010 | Untersuchungen zur Oberflächenchemie der Atomlagenabscheidung und deren Einfluss auf die Effizienz von Prozessen
Rose, Martin
: Lakner, Hubert; Bartha, Johann W. (Gutachter); Michaelis, Alexander (Gutachter) | Dissertation |
| 2010 | Virtuelle Realität optimiert schiffbauliche Prozesse
Lukas, Uwe von | Journal Article |
| 2010 | Vision 2020: Future-proofing coating processes
Ondratschek, Dieter | Conference Paper |
| 2010 | Vorgehensmodell für die Integration einer simulationsgestützten Entscheidungsassistenz in Logistiknetzen
Pernice, Ralph
: Kuhn, Axel (Hrsg.) | Dissertation |
| 2010 | Wafer level manufacturing of glass optics
Hollstegge, Daniel; Hünten, Martin; Dambon, Olaf; Klocke, Fritz | Conference Paper |
| 2010 | Werkstück-zentrierte Rekonfiguration eines miniaturisierten Fertigungssystems
Bengel, Matthias | Journal Article |
| 2010 | Workshop on Interaction Techniques in Real and Simulated Assistive Smart Environments
Kamieth, Felix; Schäfer, Johannes; Naranjo, Juan-Carlos; Arca, Antonella; Aleotti, Jacopo | Conference Paper |
| 2010 | Zum Stand der virtuellen Werkstoffentwicklung: Vom Halbzeug zum Crash
Springub, B.; Masimov, M.; Butz, A.; Feucht, M.; Lossau, S.; Neukamm, F.; Roll, K.; Haufe, A.; Roters, F.; Schwarzer, R.; Wagener, C. | Conference Paper |
| 2010 | Zustandsraummodellierung nicht-proportional gedämpfter Systeme in der mechatronischen Simulation
Neugebauer, Reimund; Scheffler, C.; Wabner, M.; Schulten, M. | Journal Article |
| 2009 | Analyse des Querfließpressens als Analogieversuch zum Strangpressen unter besonderer Berücksichtigung der Verbundbildung zwischen Aluminium und Magnesium
Awiszus, B.; Neugebauer, Reimund; Kittner, K.; Popp, M. | Journal Article |
| 2009 | Application-oriented research on machining processes
Neugebauer, Reimund; Wertheim, R.; Schubert, A.; Schmidt, G. | Presentation |
| 2009 | Auslegung beschichteter Werkzeuge zur Umformung hochfester Aluminiumwerkstoffe
Neugebauer, Reimund; Schmidt, G.; Stark, S.; Wielage, B.; Wank, A.; Rupprecht, C. | Journal Article |
| 2009 | Automotive Software Engineering
Farkas, T. | Conference Paper |
| 2009 | Basic structure and formation mechanism of Ti-Si-N superhard nanocomposite coatings
Liu, Xuejie | Dissertation |
| 2009 | CAST Vehicle. Simulation tool for: - Vehicle traffic, - ground handling processes, - apron traffic
Laubrock, M.; Quick, A. | Presentation |
| 2009 | Damping of spindle vibrations by active magnetic bearing
Neugebauer, Reimund; Böttcher, R.; Hanisch, H.; Keller, H.; Wabner, M. | Presentation |
| 2009 | Design method for machine tools with bionic inspired kinematics
Neugebauer, Reimund; Drossel, W.-G.; Ihlenfeldt, S.; Harzbecker, C. | Conference Paper, Journal Article |
| 2009 | Development of efficient milling technology using integrated process simulation
Neugebauer, Reimund; Harzbecker, C.; Ihlenfeldt, S.; Hochmuth, C.; Wabner, M.; Hoyer, K. | Conference Paper |
| 2009 | Dickblechclinchen einer Fachwerkstruktur
Israel, M.; Trojer, A. | Conference Paper |
| 2009 | Digital design at a crossroads
Schlichtmann, U.; Schmidt, M.; Kinzelbach, H.; Pronath, M.; Glöckel, V.; Dietrich, M.; Eichler, U.; Haase, J. | Conference Paper |
| 2009 | Efficient analysis of three dimensional EUV mask imaging artifacts using the waveguide decomposition method
Shao, F.; Evanschitzky, P.; Fühner, T.; Erdmann, A. | Conference Paper |
| 2009 | Effiziente Planung und wirtschaftlicher Betriebe von Logistikanlagen
Clausen, U.; Chmielewski, A.; Deymann, S. | Book Article |
| 2009 | Einsatz von Simulationssystemen bei der Planung von Montagesystemen
Wöltje, Kay | Conference Paper |
| 2009 | Entwicklung und Anwendung partikelbasierter Simulationstechniken für die Modellierung von Umordnungseffekten und Anisotropieentwicklung in pulvertechnologischen Prozessen
Wonisch, A.
: Moseler, Michael | Dissertation |
| 2009 | Erstellung interaktiver Gebrauchsanweisungen aus Interaktionsbeschreibungen
Bannikov, Alexander
: Diener, Holger (Betreuer) | Thesis |
| 2009 | Fault tree analysis of software-controlled component systems based on second-order probabilities
Förster, Marc; Trapp, Mario | Conference Paper |
| 2009 | Flach-Clinch-Punkte unerreicht eben
Awiszus, Birgit; Beyer, Ulrike; Todtermuschke, Marcel; Riedel, Frank | Journal Article |
| 2009 | Flach-Clinchen -Simulationsbasierte Optimierung und Weiterentwicklung einer einseitig ebenen, einstufig gefügten Clinch-Verbindung
Awiszus, Birgit; Beyer, Ulrike; Todtermuschke, Marcel; Riedel, Frank | Journal Article |
| 2009 | Formgenauigkeit in der Stereolithographie
Koplin, C.; Gurr, M.; Kübler, R.; Mühlhaupt, R.; Jaeger, R. | Journal Article |
| 2009 | A framework for numerical modeling and simulation of shunt damping technology
Kurch, M.; Klein, C.; Mayer, D. | Conference Paper |
| 2009 | Geometry and microstructure effect on EM-induced copper interconnect degradation
Zschech, Ehrenfried; Ho, Paul S.; Schmeißer, Dieter; Meyer, Moritz Andreas; Vairagar, Anand V.; Schneider, Gerd; Hauschildt, Meike; Kraatz, Matthias; Sukharev, Valeriy | Journal Article |
| 2009 | High performance computing and discrete dislocation dynamics: Plasticity of micrometer sized specimens
Weygand, D.; Senger, J.; Motz, C.; Augustin, W.; Heuveline, V.; Gumbsch, P. | Book Article |
| 2009 | The importance of non-local shadowing for the topography evolution of a-C:H films grown by toluene based plasma enhanced chemical vapor deposition
Hormann, C.; Meier, S.; Moseler, M. | Journal Article |
| 2009 | The influence of Helium bubbles on the critical resolved shear stress of dispersion strengthened alloys
Bako, B.; Samaras, M.; Weygand, D.; Chen, J.; Gumbsch, P.; Hoffelner, W. | Journal Article, Conference Paper |
| 2009 | Integrated supply chain risk management performed by logistic assistance systems
Yüzgülec, G.; Wagenitz, A.; Toth, M. | Presentation |
| 2009 | Integrating 3D virtual reality simulations in reusable e-learning courses
Segura, Álvaro; Moreno, Aitor; Müsebeck, Petra; Hambach, Sybille | Conference Paper |
| 2009 | Internal stresses and shape distortions in generatively manufactured implants
Jaeger, C.R.; Koplin, C.; Gurr, M.; Meiners, W. | Abstract |
| 2009 | Komplexe Lacktrocknung effizient simulieren
Ondratschek, Dieter | Journal Article |
| 2009 | Körperschalldämpfung mit partikelgefüllten Hohlkugeln
Jehring, U.; Kieback, B.; Stephani, G.; Hahn, K.; Bellin, I.; Sandler, J.; Joshi, K.; Walther, A.; Blase, D. | Conference Paper |
| 2009 | Lichtbogensimulation für Niederspannungsschaltgeräte
Rümpler, C.
: Berger, F.; Lindmayer, M.; Stammberger, H. | Dissertation |
| 2009 | Logistic assistant systems for effective supply chain planning
Toth, M.; Wagenitz, A.; Klingebiel, K. | Presentation |
| 2009 | Logistical assistant systems for effective supply chain planning
Toth, Michael; Wagenitz, Axel | Conference Paper |
| 2009 | Mask diffraction analysis and optimization for EUV masks
Erdmann, A.; Evanschitzky, P.; Fühner, T. | Conference Paper |
| 2009 | Massively-Parallel Simulation of Biochemical Systems
Ackermann, Jens; Baecher, Paul; Franzel, Thorsten; Goesele, Michael; Hamacher, Kay | Conference Paper |
| 2009 | Microstructure effect on EM-induced degradations in dual inlaid copper interconnects
Sukharev, Valeriy; Kteyan, Armen; Zschech, Ehrenfried; Nix, W.D. | Journal Article |
| 2009 | A minimization based mapping algorithm for data transfer between simulation meshes
Klimm, B. | Thesis |
| 2009 | Modelling of the deformation and fracture behaviour of laser welds for crash simulation
Sommer, S.; Klokkers, F. | Conference Paper |
| 2009 | Neue Methoden zur exakteren Werkstoffcharakterisierung
Neugebauer, Reimund; Sterzing, A.; Mueller, R. | Conference Paper |
| 2009 | Neue Prozess- und Geräteentwicklung: Simulation von Lacktrocknern
Scheibe, Andreas | Book Article |
| 2009 | Neue Wege der Spritzstrahlreinigung durch effiziente Prozesssimulation
Ondratschek, Dieter | Journal Article |
| 2009 | Numerische Simulation der Trocknungskinetik
Scheibe, Andreas | Journal Article |
| 2009 | Nutzungsabhängige Simulation intralogistischer Systeme
Kuhn, A.; Bandow, G.; Uygun, Y.; Wötzel, A. | Conference Paper |
| 2009 | Oberflächen-Engineering von Werkzeugen
Lampke, T.; Rupprecht, C.; Schmidt, G. | Book Article |
| 2009 | Optimierung der Sicherheitskontrolle in der Luftfrachttransportkette aus logistischer Sicht
Bierwirth, B. | Presentation |
| 2009 | Optimierung von Dünnschichtsystemen
Wielage, B.; Wank, A.; Rupprecht, C.; Schmidt, G.; Stark, S. | Conference Paper |
| 2009 | Quality of producer gas from different biogenous fuels
Mac an Bhaird, S.; Devlin, G.; McDonnell, K.; Owende, P.; Mevißen, N.; Schulzke, T.; Unger, C. | Conference Paper |
| 2009 | Quantitative Fehlercharakterisierung aus Ultraschall-HF-Daten mittels simulationsgestützter Auswerteverfahren
Spies, M.; Rieder, H. | Journal Article |
| 2009 | Setting up a virtual factory based on 3D internet platforms
Seitz, Stefan; Hermann, Marco; Wimpff, Daniel-Percy | Conference Paper |
| 2009 | Simulation beachtet Gewebezüchtung
Jaeger, R. | Journal Article |
| 2009 | Simulation des thermischen Verhaltens spanender Werkzeugmaschinen in der Entwurfsphase
Gleich, S. | Dissertation |
| 2009 | Simulation des Wärmegangs von Werkzeugmaschinen
Zwingenberger, C. | Report |
| 2009 | Simulative Evaluation von Routingprotokollen für den Einsatz in der Fahrzeug-Umwelt-Vernetzung
Auer, Alexander
: Jiru, Josef (Betreuer) | Bachelor Thesis |
| 2009 | Softwaregestützte, integrierte Produktionsterminierung und Transportplanung
Zesch, F.; Brauer, K.; Schwede, C. | Conference Paper |
| 2009 | SPS/IPC/DRIVES 2009
: Bender, Klaus (Hrsg.); Schumacher, Walter (Hrsg.); Verl, Alexander (Hrsg.); Höpf, Michael (Chairman) | Conference Proceedings |
| 2009 | Stiffness analysis of spot joints as a condition for the numeric modelling - new test methods
Neugebauer, Reimund; Jesche, F.; Mauermann, R.; Hensel, S. | Conference Paper |
| 2009 | Strömungen optimal simulieren
Ondratschek, Dieter | Journal Article |
| 2009 | Supply chain risk analyses performed by applying logistic assistance systems
Yüzgülec, Gökhan; Wagenitz, Axel; Toth, Michael | Conference Paper |
| 2009 | Thermodynamics of autothermal wood gasification
Mevißen, N.; Schulzke, T.; Unger, C.; Mac an Bhaird, S. | Conference Paper, Journal Article |
| 2009 | UV-härtende Lacke auf 3D-Teilen
Hoffmann, Ulrich | Journal Article |
| 2009 | VioNeS - Visual Support for the Analysis of the Next Sub-volume Method
Unger, Andrea; Gutzeit, Enrico; Jeschke, Matthias; Schumann, Heidrun | Conference Paper |
| 2009 | Visualisierung und Simulation von Energiewerten in der Digitalen Fabrik
Constantinescu, Carmen; Bruns, Axel | Conference Paper |
| 2009 | Weiterentwicklung eines Lichtbogensimulationsmodells für die Anwendung in der Schaltgeräteentwicklung
Rümpler, C.; Stammberger, H.; Zacharias, A.; Reichert, F. | Conference Paper |
| 2008 | Adaptive Ultraschallprüfung aus dem Block gewalzter Stahlknüppel
Kreier, P.; Schwendimann, M.; Rieder, H. | Conference Paper |
| 2008 | Animating and rendering virtual humans
Jung, Yvonne | Conference Paper |
| 2008 | Buffer management for automated material handling systems in semiconductor industries
Fischmann, Christian; Böttinger, Fabian; Wertz, Roland; Kunz, Christian | Conference Paper |
| 2008 | Comparison of different methods for simulating the effect of specular ion reflection on microtrenching during dry etching of polysilicon
Kunder, D.; Baer, E. | Journal Article |
| 2008 | Computer simulation tool for the optimization of 3D water jet cleaning processes
Schneider, Matthias; Gruseck, Daniel; Pulli, Karlheinz; Schieweck, Jörg | Conference Paper |
| 2008 | Continuum concepts in nanoscale capillary impregnation
Henrich, B.; Cupelli, C.; Santer, M.; Moseler, M. | Journal Article |
| 2008 | Development of functional nanofillers with controlled release properties for innovative adhesive formulations
Noeske, M.; Schiffels, P.; Trautmann, J. | Conference Paper |
| 2008 | Discrete dislocation simulations of the plasticity of micro-pillars under uniaxial loading
Senger, J.; Weygand, D.; Gumbsch, P.; Kraft, O. | Journal Article |
| 2008 | Distribution
Vastag, A. | Book Article |
| 2008 | DNS simulation environment to study email worm epidemics
Pujol, E.
: Chatzis, N. (Prüfer); Martorell, X. (Prüfer) | Thesis |
| 2008 | Einbeziehung des Bearbeitungsprozesses in die Modellbildung zum Betriebsverhalten von Fertigungsmaschinen mit Parallelkinematiken
Neugebauer, Reimund; Ihlenfeldt, S.; Leopold, J.; Hoyer, K.; Wabner, M. | Book Article |
| 2008 | Entwurf von SPS-Steuerungen am virtuellen Maschinenprototyp
Blochwitz, T.; Altmann, S. | Journal Article |
| 2008 | Erfolgreich mit wandlungsfähigen Produktionen
Westkämper, Engelbert | Journal Article |
| 2008 | Erweiterung der Prozessgrenzen beim Laserstrahlschweißen heißrissgefährdeter Werkstoffe
Göbel, G. | Dissertation |
| 2008 | Experimentelle und numerische Untersuchungen zu MFC-Metall-Schichtverbunden
Neugebauer, Reimund; Kreissig, R.; Lachmann, L.; Lieber, T.; Meinel, S.; Müller, R. | Conference Paper |
| 2008 | Game-based learning with computers - learning, simulations, and games
Martens, Alke; Diener, Holger; Malo, Steffen | Book Article |
| 2008 | Grid engineering for networked and multi-scale manufacturing
Constantinescu, Carmen; Westkämper, Engelbert | Conference Paper |
| 2008 | High-Tech Solutions and Concepts - Hochtechnologielösungen und anwendbare Praxis-Konzepte
: Meyer, R. | Conference Proceedings |
| 2008 | IFFOCUS. 2008/1: Logistik verbindet
Wassilew, A.-K.; Maresch, R.
: Schenk, M. | Journal Issue |
| 2008 | Implementierung und Evaluierung des MANET-Routingprotokolls OLSRv2 auf Basis der Simulationsumgebung JiST / MobNet
Eichelberger, Carsten
: Ebinger, Peter (Betreuer) | Thesis |
| 2008 | Improved empty vehicle balancing in automated material handling systems
Wertz, Roland; Fischmann, Christian; Böttinger, Fabian; Kasperczyk, Martin | Conference Paper |
| 2008 | Improvement of the overall system efficiency of a flat-jaw cross rolling machine by the retrofitting of the hydraulic drive and control system
Klug, D.; Hoffmann, M. | Conference Paper |
| 2008 | Informations- und Sensortechnologien im militärischen Bereich
Euting, T.; Grüne, M.; Kernchen, R.; Kohlhoff, J.; Kretschmer, T.; Nätzker, W.; Neupert, U.; Notthoff, C.; Reschke, S.; Ruhlig, K.; Suhrke, M.; Wessel, H.
: Kretschmer, T.; Wiemken, U. | Book |
| 2008 | Intelligent verketten durch Simulationen
Verl, Alexander; Fritsch, Dennis; Mütherich, Hendrik | Journal Article |
| 2008 | Kopplung von ANSYS und MATLAB
Berger, J. | Thesis |
| 2008 | Learning agent-behavior for agent-based simulation using genetic algorithms
Wolters, B.; Steffens, T. | Conference Paper |
| 2008 | Low-speed fracture instabilities in a brittle crystal
Kermode, J.R.; Albaret, T.; Sherman, D.; Bernstein, N.; Gumbsch, P.; Payne, M.C.; Csanyi, G.; Vita, A. de | Journal Article |
| 2008 | ManIPA: A flexible manipulation framework for collision avoidance and robot control
Reiser, Ulrich; Volz, Rene; Geibel, Felix | Conference Paper |
| 2008 | Modeling approaches and design methods for 3D system design
Schneider, P.; Elst, G. | Book Article |
| 2008 | Modellgestützte Optimierung von Zerkleinerungswerkzeugen
: Blömer, J.; McNamara, S. | Report |
| 2008 | Modelling and simulation of drying processes - a new approach in virtual painting
Scheibe, Andreas; Westkämper, Engelbert; Ye, Qiaoyan | Conference Paper |
| 2008 | Neue Potentiale für die Instandhaltung
Kuhn, A.; Bandow, G. | Conference Paper |
| 2008 | Neue Prozess- und Geräteentwicklungen: Simulation bauteilgerechter Reinigung
Scheibe, Andreas | Book Article |
| 2008 | Neues Verfahren zur Montage von Mikro-Komponenten
Sandmaier, Hermann; Sägebarth, Joachim; Boufercha, Nourdin; Schäfer, Wolfgang; Othman, Nabih; Schlenker, Dirk; Burgard, Matthias | Journal Article |
| 2008 | New approach for the characterisation of sheet materials - a precondition for the use of new sheet materials and forming processes
Neugebauer, Reimund; Sterzing, A.; Müller, R.; Silbermann, K. | Conference Paper |
| 2008 | Numerische Optimierung von 3D-UV-Härtungsvorgängen
Schieweck, Jörg; Schneider, Matthias | Conference Paper |
| 2008 | Optimal probe arrangement for ultrasonic inspection of spin test disks
Bamberg, J.; Spies, M. | Conference Paper |
| 2008 | Overview on the state of development and the application potential of dieless mechanical joining processes
Neugebauer, Reimund; Todtermuschke, M.; Mauermann, R.; Riedel, F. | Conference Paper |
| 2008 | Potential of manipulating the damping properties of parallel kinematic machine tools
Wabner, M.; Grzejszczyk, S.; Neugebauer, Reimund | Journal Article, Conference Paper |
| 2008 | Praxistipps für wirtschaftliche und innovative Lackierprozesse: Trocknungsbedingungen und -fehler vorhersagen - mit Simulation die Prozesssicherheit erhöhen
Scheibe, Andreas | Book Article |
| 2008 | Realistic simulation of V2X communication scenarios
Queck, T.; Schünemann, B.; Radusch, I.; Meinel, C. | Conference Paper |
| 2008 | Reinigen mit Spritzstrahlern
Ondratschek, Dieter | Journal Article |
| 2008 | Reinraumgerechtes Anlagen- und Equipment Design / Computational Fluid Dynamics (CFD)
Bürger, Frank; Gommel, Udo | Journal Article |
| 2008 | Robotik 2008. Leistungsstand, Anwendungen, Visionen, Trends
: Verl, A.; Hägele, M. | Conference Proceedings |
| 2008 | Runtime infrastructure for simulating vehicle-2-X communication scenarios
Queck, T.; Schünemann, B.; Radusch, I. | Conference Paper |
| 2008 | Schichtentwicklung für die schmiermittelfreie Umformung von hochfesten Aluminiumwerkstoffen
Wielage, B.; Wank, A.; Rupprecht, C.; Schmidt, G.; Stark, S. | Journal Article |
| 2008 | Shape accuracy in stereolithography: A material model for the curing behavior of photo-initiated resins
Koplin, C.; Gurr, M.; Mülhaupt, R.; Jaeger, R. | Conference Paper |
| 2008 | Shipyard investment planning by use of modern process-simulation and layout-planning tools
Weidemann, Björn; Bohnenberg, Ralf; Wanner, Martin-Christoph | Conference Paper |
| 2008 | Simulation der Applikation viskoser PVC-Materialien und der anschließenden UV-Bestrahlung
Domnick, Joachim; Scheibe, Andreas; Schneider, Matthias | Conference Paper |
| 2008 | Simulation der Spritzstrahlreinigung
Scheibe, Andreas; Schieweck, Jörg; Westkämper, Engelbert; Schwarz, Joachim | Journal Article |
| 2008 | Simulation hilft, die Qualität zu steigern
Scheibe, Andreas | Journal Article |
| 2008 | Simulation in der Lackiertechnik
Scheibe, Andreas; Ye, Qiaoyan | Conference Paper |
| 2008 | Simulation logistischer Systeme
Kuhn, A. | Book Article |
| 2008 | Simulation of die filling in 3D with special emphasis on vibration supported filling
Bierwisch, C.; Kraft, T.; Moseler, M.; Riedel, H. | Conference Paper |
| 2008 | Simulation of relevant process variables for electrochemical etching
Neugebauer, Reimund; Knüpfer, H.; Wolf, K.; Roscher, H.-J. | Conference Paper |
| 2008 | Simulation of the film formation at a high-speed rotary bell atomizer used in automotive spray painting processes
Domnick, Joachim; Yang, Z.; Ye, Qiaoyan | Conference Paper |
| 2008 | Simulation von Span- und Gratbildung zur Qualitätserhöhung beim Bohren
Neugebauer, Reimund; Schmidt, G.; Dix, M.; Hoyer, K. | Conference Paper |
| 2008 | Simulationsgestütztes mechatronisches Engineering
Lechler, Armin; Kircher, Christian; Verl, Alexander | Journal Article |
| 2008 | Spieltheoretische Lernansätze
Langer, T. | Book |
| 2008 | Spritzstrahlreinigung von 3D-Teilen - Prozessoptimierung durch Computersimulation
Scheibe, Andreas; Schieweck, Jörg; Schneider, Matthias | Journal Article |
| 2008 | Steuerungsentwicklung mit Simulationssoftware
Verl, Alexander; Fritsch, Dennis | Journal Article |
| 2008 | Synergien nutzen
Meier, Matthias; Fischmann, Christian; Böttinger, Fabian | Journal Article |
| 2008 | Towards interactive simulation in automotive design
Stork, A.; Thole, C.-A.; Klimenko, S.; Nikitin, I.; Nikitina, L.; Astakhov, Y. | Journal Article, Conference Paper |
| 2008 | The use of simulation techniques for hybrid software cost estimation and risk analysis
Kläs, Michael; Trendowicz, Adam; Wickenkamp, Axel; Münch, Jürgen; Kikuchi, Nahomi; Ishigai, Yasushi | Book Article |
| 2008 | Verbesserte Qualitätssicherung durch das Zusammenspiel von Inspektionsprozeduren mit Simulations- und Rekonstruktionsalgorithmen
Scheben, R.; Götz, S.; Spies, M.; Rieder, H. | Conference Paper |
| 2008 | Verifikation und Validierung für die Simulation in Produktion und Logistik
Rabe, M.; Spiekermann, S.; Wenzel, S. | Book |
| 2008 | Virtuelle mechatronische Produkte werden erlebbar
Stork, André | Journal Article |
| 2008 | Virtuelle Messgeräte - Definition und Stand der Entwicklung
Schmitt, R.; Koerfer, F.; Sawodny, O.; Zimmermann, J.; Krüger-Sehm, R.; Min, X.; Dziomba, T.; Koenders, L.; Goch, G.; Tausendfreund, A.; Patzelt, S.; Simon, S.; Rockstroh, L.; Bellon, C.; Staude, A.; Woias, P.; Goldschmidtböing, F.; Rabold, M. | Journal Article |
| 2008 | Visioplastische Untersuchungen beim Walzen von Hochverzahnungen
Milbrandt, M. | Thesis |
| 2008 | The VRL-KCiP Software Demonstration and Exchange Platform - an example for web-based knowledge management and representation
Aldinger, Lars; Westermann, Jürgen; Westkämper, Engelbert | Book Article |
| 2008 | Zwischenergebnisse zum Verbundprojekt "Simulation von Lacktrocknern"
Scheibe, Andreas; Ye, Qiaoyan | Conference Paper |
| 2007 | Adaptronisches Bohrwerkzeug - Piezoaktorische Zusatzachsen zur Kompensation von Bohrwerkzeugschwingungen
Brecher, C.; Schauerte, G. | Journal Article |
| 2007 | Analyzing mechanical stresses caused by temperature gradients using finite elements simulation
Weiß, K.-A.; Heck, M.; Köhl, M. | Conference Paper |
| 2007 | Atomistic modeling of hydrocarbon systems using analytic bond-order potentials
Mrovec, M.; Moseler, M.; Elsässer, C.; Gumbsch, P. | Journal Article |
| 2007 | Atomistic simulations of dislocation - crack interaction
Bitzek, E.; Gumbsch, P. | Conference Paper |
| 2007 | Auswertung von Positionsdaten, Funkcharakteristika und des Verbindungsgraphen für die Angriffserkennung in mobilen Ad-hoc-Netzen
Sommer, Martin
: Ebinger, Peter (Betreuer) | Thesis |
| 2007 | Charakterisierung und Modellierung kurzfaserverstärkter thermoplastischer Kunststoffe zur numerischen Simulation von Crashvorgängen
Krivachy, R.
: Thoma, K. (Prüfer); Hiermaier, S. (Prüfer) | Dissertation |
| 2007 | Computing digital road profiles for agricultural vehicle simulations
Bitsch, G.; Dreßler, K.; Marquardt, A.; Nikelay, I.; Gölzer, M. | Conference Paper |
| 2007 | Constraint-based virtual conceptual design
Brunetti, Gino; Stork, André | Journal Article |
| 2007 | Development of Modeling and Simulation from mid 70th up to now
Leopold, J. | Conference Paper |
| 2007 | Diffusion and deactivation of As in Si: Combining atomistic and continuum simulation approaches
Martinez-Limia, A.; Steen, C.; Pichler, P.; Gupta, N.; Windl, W.; Paul, S.; Lerch, W. | Conference Paper |
| 2007 | Discrete dislocation dynamics simulations of dislocation interactions with Y2O3 particles in PM2000 single crystals
Bako, B.; Weygand, D.; Samaras, M.; Chen, J.; Pouchon, M.A.; Gumbsch, P.; Hoffelner, W. | Journal Article |
| 2007 | Empirical software engineering issues
: Basili, Victor R. (Ed.); Rombach, H. Dieter (Ed.); Schneider, Kurt (Ed.); Kitchenham, Barbara (Ed.); Pfahl, Dietmar (Ed.); Selby, Richard W. (Ed.) | Conference Proceedings |
| 2007 | Entwicklung eines Konzepts zur Integration von Simulationen ins E-Learning
Paschen, Alexander
: Urban, Bodo; Ebert, Mirko | Thesis |
| 2007 | Entwicklung und Optimierung von Umformfügeverfahren auf Basis der FE-Analyse
Mauermann, R.; Dietrich, S. | Conference Paper |
| 2007 | Entwurf von SPS-Steuerungen am virtuellen Maschinenprototyp
Blochwitz, T.; Altmann, S. | Conference Paper |
| 2007 | Grenzen und Herausforderungen der Bedarfs- und Kapazitätsplanung in den Prozessen
Kimmich, Jörg | Book Article |
| 2007 | Hochgeschwindigkeitsverzinkung (HGV) geometrisch komplexer Bauteile
Janisch, Christoph | Dissertation |
| 2007 | IFFOCUS. 2007/1: Logistik verbindet
: Schenk, M. | Journal Issue |
| 2007 | IFFOCUS. 2007/2: Mensch-Maschine interaktiv
: Schenk, M.; Wassilew, A.-K. | Journal Issue |
| 2007 | Influence of the machine tool stability and errors on surface quality
Lu, H.; Leopold, J. | Conference Paper |
| 2007 | An integrated approach to production logistics and factory IT optimization for photovoltaic manufacturing
Meier, Matthias; Böttinger, Fabian; Muckenhirn, Ralf; Wiechers, Ortrun; Fischmann, Christian | Conference Paper |
| 2007 | Investigations on the adjustment of the modeling section in 2D simulation of milling processes
Uhlmann, E.; Mattes, A.; Zettier, R.; Graf von der Schulenburg, M. | Conference Paper |
| 2007 | Keramische Walzensysteme aus Siliciumnitrid
Khader, I.; Gumbsch, P.; Kailer, A. | Conference Paper |
| 2007 | Kompetenzabhängiges Simulationsverfahren zur Optimierung von Produktentwicklungsprozessen
Strebel, M.
: Krause, F.-L. (Prüfer) | Dissertation |
| 2007 | Life cycle cost controlling in industrial manufacturing
Niemann, Jörg | Conference Paper |
| 2007 | Measurement of dynamic properties of MEMS and the possibilities of parameter identification by simulation
Ebert, M.; Naumann, F.; Gerbach, R.; Bagdahn, J. | Conference Paper |
| 2007 | Mechatronische Modellbildung von Produktionsanlagen
Schob, U. | Book |
| 2007 | Messprozesse besser verstehen
Koerfer, F.; Schmitt, R. | Conference Paper |
| 2007 | Eine Methodik zum dynamischen Life Cycle Controlling von Produktionssystemen
Niemann, Jörg | Dissertation |
| 2007 | Mitarbeiterqualifizierung für die Produktionslogistik
Wiendahl, Hans-Hermann; Fischmann, Christian | Journal Article |
| 2007 | Modellunterstützte Kapazitätsplanung in der variantenreichen Serienproduktion
Bauer, T.; Kreppenhofer, D. | Journal Article |
| 2007 | Modifikation einer konventionellen Schweißzange unter Verwendung von faserverstärktem Kunststoff
Meltke, R. | Thesis |
| 2007 | Neue Vorgehensmodelle zur prozessorientierten Logistikplanung
Kuhn, A.; Schmidt, A.; Beller, M. | Book Article |
| 2007 | A new approach for the modelling and simulation of 3D UV-curing processes
Scheibe, Andreas; Schneider, Matthias; Westkämper, Engelbert | Journal Article |
| 2007 | Optimizing the feed velocity of NC-tool paths
Uhlmann, E.; Mattes, A. | Conference Paper |
| 2007 | Physically based simulation of fully depleted SOI MOS transistors at nanometer gate lengths
Burenkov, A.; Kampen, C.; Lorenz, J.; Ryssel, H. | Abstract |
| 2007 | Planning and erecting factories for mass manufacturing of thin film photovoltaics
Reddig, Kevin; Böttinger, Fabian; Köpfli, Rolf | Conference Paper |
| 2007 | Planning and operation of production systems
: Morar, Liviu (Mitarb.); Westkämper, Engelbert (Mitarb.); Abrudan, Ioan (Mitarb.); Pîsla, Adrian (Mitarb.); Niemann, Jörg (Mitarb.); Manole, Ion (Mitarb.) | Book |
| 2007 | Eine Planungs- und Experimentierumgebung für die Tourenplanung unter Ungewissheit
Simroth, A.; Baumbach, B. | Report |
| 2007 | Professional Training Facts 2006. CD-ROM
: Karapidis, A.; Hamann, K. | Conference Proceedings |
| 2007 | Real time rendering and animation of virtual characters
Jung, Yvonne; Knöpfle, Christian | Journal Article |
| 2007 | Simulation des reaktiven Magnetron-Sputterns
Pflug, A. | Dissertation |
| 2007 | Simulation für Lacke - virtuelles UV-Härten in der Möbelindustrie
Schieweck, Jörg | Journal Article |
| 2007 | Simulation of a piezo-based vibration drive for electrochemical etching
Neugebauer, Reimund; Knüpfer, H.; Wolf, K.; Roscher, H.-J. | Conference Paper |
| 2007 | Simulation of thin film manufacturing logistics
Wertz, Roland | Conference Paper |
| 2007 | Simulation software for an efficient layout of 3D-UV curing processes
Rother, Klemens; Schneider, Matthias; Okamitsu, Jeffrey K.; Gotthold, Stefan | Conference Paper |
| 2007 | Simulation von Lacktrocknern
Scheibe, Andreas; Westkämper, Engelbert | Journal Article |
| 2007 | Simulations of the influence of rearrangement during sintering
Henrich, B.; Wonisch, A.; Kraft, T.; Moseler, M.; Riedel, H. | Journal Article |
| 2007 | Simulationsgestützte Entscheidungsfindung für die Materialfluss- und Kapazitätsplanung
Böttinger, Fabian; Fischmann, Christian; Reddig, Kevin; Köpfli, Rolf | Journal Article |
| 2007 | Simulationsverfahren für eine optimale Luftführung in großräumigen Lackierkabinen
Scheibe, Andreas; Steinhilber, Timo; Ye, Qiaoyan; Westkämper, Engelbert | Journal Article |
| 2007 | Szenarien für den Einsatz von VR-Technologien in der maritimen Wirtschaft
Deistung, Eik; Friedewald, Axel; Mesing, Benjamin; Schaefer, Christoph | Conference Paper |
| 2007 | Threshold strength prediction for laminar ceramics from bifurcated crack path simulation
Bahr, H.-A.; Pham, B. van; Weiss, H.-J.; Bahr, U.; Streubig, M.; Balke, H.; Ulbricht, V. | Journal Article |
| 2007 | Verbesserte Abbildungsgenauigkeit bei der Simulation von Umformfügeverbindungen durch geeignete Kennwertermittlung
Neugebauer, Reimund; Dietrich, S.; Kraus, C.; Israel, M. | Conference Paper |
| 2007 | Verbesserung der Abbildungsgüte aggregierter Modelle zur Simulation und Optimierung komplexer Fernwärmenetze
Wigbels, M. | Dissertation |
| 2007 | Visualisierung von Simulationsparametern thermischer Tumorablationsverfahren
Gasteiger, R.; Ritter, F.; Preim, B.; Preusser, T. | Conference Paper |
| 2007 | Vorausschauende Veränderungsplanung - eine Simulationsaufgabe?
Kuhn, A.; Jungmann, T.; Bandow, G. | Conference Paper |
| 2007 | VPS/ESC: Overview of a new module for electrostatic coating
Scheibe, Andreas | Conference Paper |
| 2007 | VPS/UV: Progress, new findings and recent developments
Schneider, Matthias | Conference Paper |
| 2007 | Wechselspiel zwischen experimenteller und numerischer Simulation
Hanselka, H. | Journal Article |
| 2007 | Welding simulation of aluminum automotive construction using SYSWELD simulation solution
Brand, M.; Siegele, D. | Journal Article |
| 2007 | Werkstoffmodellierung und Simulation
Riedel, H.; Gumbsch, P. | Book Article |
| 2007 | Zwischenergebnisse zum Verbundprojekt "Simulation von Lacktrocknern"
Scheibe, Andreas | Conference Paper |
| 2006 | Accurate parameter extraction for the simulation of direct structuring by ion beams
Beuer, S.; Rommel, M.; Lehrer, C.; Platzgummer, E.; Kvasnica, S.; Bauer, A.J.; Ryssel, H. | Poster |
| 2006 | Acquiring, structuring shapes and annotating them with semantics to improve design activities
Leon, J.-C.; Giannini, F.; Falcidieno, B.; Brunetti, G.; Graf, H.; Stork, A.; Vexo, F.; Thalmann, D. | Conference Paper |
| 2006 | Analyse und Simulation des Transversalschwingungseinflusses von Riemengetrieben auf Fehler der Werkstückoberfläche
Li, B. | Dissertation |
| 2006 | Appointing subsurface material properties of Ti6242 and Udimet720 by high speed 5-axis machining
Klocke, F.; Albrecht, J.; Bergs, T.; Meinecke, M.; Rohde, L. | Conference Paper |
| 2006 | Approach for artificial load generation for acceptance test of AMHS
Fischmann, C.; Muckenhirn, R.; Sturm, R. | Conference Paper |
| 2006 | Automobil- und Antriebstechnik. Produktionstechnische Grundlagen
Schmid, K. | Conference Paper |
| 2006 | Ein Beitrag zur Optimierung von elektrochemisch hergestellten Oberflächen im Werkzeug- und Formenbau
Gerth, C. | Dissertation |
| 2006 | Beitrag zur simulationsgestützten Planung von Demontagefabriken für Elektro- und Elektronikaltgeräte
Ciupek, M.
: Seliger, G. (Prüfer) | Dissertation |
| 2006 | Benefitting from simulation tools for optimum air flow control in spacious spray booths
Scheibe, Andreas; Steinhilber, Timo; Ye, Qiaoyan; Westkämper, Engelbert | Conference Paper |
| 2006 | CAE approach to the design of smart structures applications
Auweraer, H. van der; Herold, S.; Mohring, L.; Oliviera, L. de; Silva, M. da; Deraemaeker, A. | Conference Paper |
| 2006 | Chancen der Simulationstechnik in der Presswerksplanung
Blau, P.; Pfeifer, M.; Werner, M. | Conference Paper |
| 2006 | Computer-gestützte Operationsplanung bei Leberlebendspenden
Radtke, A.; Bockhorn, M.; Schroeder, T.; Lang, H.; Paul, A.; Nadalin, S.; Saner, F.; Schenk, A.; Broelsch, C.E.; Malago, M. | Journal Article |
| 2006 | Constraint-based virtual conceptual design
Brunetti, G.; Schneider, P.; Stork, A. | Conference Paper |
| 2006 | Design automation for systems on a chip realized in leading edge manufacturing technologies
Elst, G.; Schneider, P. | Conference Paper |
| 2006 | Digital factory - barrier, potential, outlook
Graupner, T.-D. | Conference Paper |
| 2006 | Dynamic life cycle control of integrated manufacturing systems using planning processes based on experience curves
Niemann, J.; Westkämper, E. | Journal Article |
| 2006 | Dynamic life cycle performance simulation of production systems
Niemann, J.; Westkämper, E. | Journal Article |
| 2006 | Dynamic life cycle performance simulation of production systems
Niemann, J.; Westkämper, E. | Conference Paper |
| 2006 | Dynamic lifecycle control of integrated manufacturing systems
Niemann, Jörg; Westkämper, Engelbert | Conference Paper |
| 2006 | Echtzeitfähiges Fabrik-Cockpit für den produzierenden Mittelstand
Kapp, R.; Blond, J. le; Schreiber, S.; Pfeffer, M.; Westkämper, E. | Journal Article |
| 2006 | Electrochemical drilling of deep micro holes with bulk electrodes
Schubert, A.; Hackert, M.; Meichsner, G. | Conference Paper |
| 2006 | Entwicklung eines simulationsfähigen COTS Assessments und Selection Tools auf Basis eines für Software adäquaten hierarchischen MCDM Meta Modells
Schillinger, D.
: Rombach, H.D. (Prüfer); Ochs, M.A. (Prüfer) | Thesis |
| 2006 | Entwicklung und Evaluation einer Komponente zur simulationsbasierten, experimentellen Evaluierung von Entscheidungsmodellen für Standardsoftware
Schillinger, D.
: Rombach, H.D.; Ochs, M.A. | Report |
| 2006 | Ersatzmodelle für Punktschweißverbindungen in der Crashsimulation
Sommer, S.; Sun, D.-Z. | Conference Paper |
| 2006 | Fabrik-Cockpit: Eine echtzeitfähige Planungsumgebung
Kapp, R.; Weimer, T.; Westkämper, E. | Conference Paper |
| 2006 | Factory cockpit: A factory simulator for the entire factory life cycle
Kapp, R.; Weimer, T.; Westkämper, E. | Conference Paper |
| 2006 | Factory cockpit: A factory simulator for the entire factory life cycle
Kapp, Ralf; Weimer, Tobias; Westkämper, Engelbert | Journal Article |
| 2006 | Game based learning
: Diener, H.; Malo, S.; Martens, A.; Urban, B. | Conference Proceedings |
| 2006 | Generous allocation and a ban on banking - implications of a simulation game for EU emissions trading
Schleich, J.; Ehrhart, K.-M.; Hoppe, C.; Seifert, S. | Book Article |
| 2006 | The interaction mechanism of screw dislocations with coherent twin boundaries in different face-centred cubic metals
Jin, Z.-H.; Gumbsch, P.; Ma, E.; Albe, K.; Lu, K.; Hahn, H.; Gleiter, H. | Journal Article |
| 2006 | Kollaboratives Engineering in der Digitalen Logistik
Bernhard, J.; Jessen, U. | Conference Paper |
| 2006 | Logistics, Supply Chain Management and Information Technologies
: Ivanov, D.; Kuhn, A.; Kukinskiy, V. | Conference Proceedings |
| 2006 | Making of state space formulations of dynamic systems
Knüpfer, H.; Illgen, A.; Neugebauer, Reimund; Kranz, B. | Conference Paper |
| 2006 | Materialflusssimulationen als effizientes Werkzeug zur Planung und Realisierung von Automatisierungslösungen
Fritsch, D. | Conference Paper |
| 2006 | Mit Simulation komplexe Netzwerke gestalten
Hellingrath, B.; Toth, M.; Wagenitz, A.; Motta, M.; Klingebiel, K. | Journal Article |
| 2006 | Modeling approaches for active systems
Herold, S.; Atzrodt, H.; Mayer, D.; Thomaier, M. | Conference Paper |
| 2006 | Multi-scale simulations of rearrangement effects and anisotropic behavior during sintering
Wonisch, A.; Kraft, T.; Riedel, H. | Conference Paper |
| 2006 | Neue Prozess- und Geräteentwicklungen: Simulation von Lacktrocknern
Scheibe, A. | Book Article |
| 2006 | A new approach for the modelling and simulation of 3D UV-curing processes
Scheibe, A.; Schneider, M.; Westkämper, E. | Conference Paper |
| 2006 | A new simulation and optimisation tool for 3D UV-curing processes
Scheibe, A.; Schneider, M.; Westkämper, E. | Conference Paper |
| 2006 | Numerical simulation of radio frequency ablation with state dependent material parameters in three space dimensions
Kröger, T.; Altrogge, I.; Preusser, T.; Pereira, P.L.; Schmidt, D.; Weihusen, A.; Peitgen, H.-O. | Conference Paper |
| 2006 | Nutzung von Gebäudedaten in der Baulogistik
Clausen, U.; Weber, J.R. | Book Article |
| 2006 | Optimierung der Pulverlackapplikation durch Anwendung experimenteller und numerischer Untersuchungsverfahren
Pulli, K. | Dissertation |
| 2006 | Parasitic effects in EMI filters
Hoene, E.; Lissner, A.; Weber, S.-P.; Guttowski, S.; Reichl, H. | Conference Paper |
| 2006 | Pattern Effects with the Mask Off
Nenyei, Z.; Niess, J.; Lerch, W.; Dietl, W.; Timans, P.J.; Pichler, P. | Conference Paper |
| 2006 | Potenzialbasierte Systemkomponentenauswahl
Özcan, A. | Conference Paper |
| 2006 | Process development for 3D UV curing via computer simulation
Okamitsu, J.K.; Schneider, M.; Scheibe, A. | Conference Paper |
| 2006 | Professional training facts 2005
: Karapidis, A.; Becker, T. | Conference Proceedings |
| 2006 | Projektierung modularer Produktionssysteme unter Nutzung von Werkzeugen der Digitalen Fabrik
Graupner, T.-D.; Tix, F. | Conference Paper |
| 2006 | Roberta - der Simulator RobertaSim
: Theidig, G.; Börding, J.; Petersen, U. | Book |
| 2006 | Sensor concept for robotic swarms for the elimination of marine oil pollutions
Fritsch, D.; Wegener, K.; Schraft, R.D. | Conference Paper |
| 2006 | Simulation in der logistischen Fernausbildung
Bernhard, J.; Wenzel, S. | Presentation |
| 2006 | Simulation of active systems in a NVH full car model
Atzrodt, H.; Herold, S.; Mayer, D. | Conference Paper |
| 2006 | Simulation of welded aluminium automotive components
Veneziano, C.; Brand, M.; Pfeiffer, W.; Siegele, D.; Gumbsch, P. | Journal Article |
| 2006 | Simulation und Charakterisierung von Mikrofluidiksystemen zur mäanderförmigen Strömungsführung in Lab-on-a-Chip-Systemen
Sonntag, F.; Vogelsang, S.; Klotzbach, U. | Conference Paper |
| 2006 | Simulation und Optimierung von Lackierprozessen und -anlagen - Teilprozesse der Virtuellen Fabrik
Scheibe, Andreas | Conference Paper |
| 2006 | Simulation von Belastungen an Glasverpackungen aus Holz
Hasselmann, G. | Conference Paper |
| 2006 | Simulation von Prozessfolgen mit der Diskrete-Elemente-Methode
Riedel, H.; Wonisch, A.; Bierwisch, C.; Kraft, T.; Moseler, M. | Conference Paper |
| 2006 | Simulationsunterstützter Fertigungsleitstand für die Produktion von Kühlsystemen
Wanner, M.-C.; Czarnietzki, R. | Journal Article |
| 2006 | Standardisierte Systemlastbeschreibung für die Modellierung großer Netze der Logistik
Bernhard, J.; Schürmann, C.; Sieke, H.; Völker, H. | Conference Paper |
| 2006 | Status quo der Digitalen Fabrik: Potenziale, Branchen, Herausforderungen
Graupner, T.-D. | Conference Paper |
| 2006 | Study of impact excited elastic waves in concrete by scanning laser vibrometry
Köhler, B.; Schubert, F. | Conference Paper |
| 2006 | Third International Conference Multiscale Materials Modeling 2006. Proceedings
: Gumbsch, P. | Conference Proceedings |
| 2006 | Towards optimization of probe placement for radio-frequency ablation
Altrogge, I.; Kröger, T.; Preusser, T.; Büskens, C.; Pereira, P.L.; Schmidt, D.; Weihusen, A.; Peitgen, H.-O. | Conference Paper |
| 2006 | An ultrasonic mode conversion technique for characterizing prism-shaped material samples
Bouhadjera, A.; Schubert, F. | Conference Paper |
| 2006 | Ultrasonic testing of thick walled austenitic welds: Modelling and experimental verification
Köhler, B.; Müller, W.; Spies, M.; Schmitz, V.; Zimmer, A.; Langenberg, K.-J.; Mletzko, U. | Conference Paper |
| 2006 | Verfahren und Anlage zum automatisierten Kommissionieren von in Beuteln verpackten Gütern
Leiking, L. | Conference Paper |
| 2006 | Vibration control with adaptive structures
Hanselka, H.; Melz, T.; Drossel, W.-G.; Sporn, D.; Schönecker, A.; Poigné, A. | Conference Paper |
| 2006 | Virtuelle Inbetriebnahme mit Werkzeugen der Digitalen Fabrik
Graupner, T.-D. | Conference Paper |
| 2006 | Zur Wasserdampfaktivierung von Aktivkohlevorprodukten im direkt beheizten Drehrohrreaktor
Horn, C. | Dissertation |
| 2005 | Adaptive Modellierung und Simulation von Produktentwicklungsprozessen
Voigtsberger, J.
: Krause, F.-L. (Prüfer) | Dissertation |
| 2005 | Advances in methods and systems for development of products and processes
: Bley, H.; Jansen, H.; Krause, F.-L.; Shpitalni, M. | Conference Proceedings |
| 2005 | Anwendung der dynamisch-energetischen Simulation zur Produktivitätssteigerung bei Massivumformmaschinen mit hydraulischen Antrieben
Neugebauer, Reimund; Klug, D.; Noack, S. | Conference Paper |
| 2005 | An application oriented view on materials modeling
Gumbsch, P. | Book Article |
| 2005 | Automatic optimization of joining by forming by numerical simulation
Jesche, F.; Neugebauer, Reimund; Royer, L. | Journal Article |
| 2005 | Beurteilung der Leistungsfähigkeit von Materialmodellen zur Blechumformsimulation
Neugebauer, Reimund; Heidl, W.; Michael, D.; Gumbsch, P.; Schmitt, W.; Krasowsky, A. | Report |
| 2005 | Bewertung der Ergebnisse und Simulation der Zuverlässigkeit
Nowottnick, M.; Pape, U.; Neher, W. | Book Article |
| 2005 | Chancen und Risiken des Life Cycle Costing
Westkämper, E. | Conference Paper |
| 2005 | Chirurgisches Training mit Technologien der Virtuellen Realität
Sakas, G.; Bockholt, U. | Journal Article |
| 2005 | Classifications and conventions structure the handling of models within the Digital Factory
Bernhard, J.; Jessen, U.; Wenzel, S. | Journal Article |
| 2005 | Computer modeling of 3D UV curing processes
Scheibe, A.; Schieweck, J.; Schneider, M. | Conference Paper |
| 2005 | Digitale Fabrik geht fremd
Graupner, T.-D. | Journal Article |
| 2005 | Digitale Planung der Produktion und Logistik schafft Transparenz
Özcan, A. | Conference Paper |
| 2005 | Dynamic life cycle control of integrated manufacturing systems using planning processes based on experience curves
Niemann, J.; Westkämper, E. | Conference Paper |
| 2005 | Dynamic life cycle performance simulation of production systems
Niemann, J.; Westkämper, E. | Conference Paper |
| 2005 | Dynamic life cycle performance simulation of production systems
Niemann, J.; Westkämper, E. | Conference Paper |
| 2005 | Effiziente Visualisierungs- und Interaktionsmethoden zur Analyse numerischer Simulationen in virtuellen und erweiterten Realitäten
Benölken, P.
: Encarnacao, J.L. (Prüfer) | Dissertation |
| 2005 | Electrodeposition of gradient layers for improved impact load resistance
Fauser, H.; Poizat, C.; Grimm, M.; Knoll, H.; Schmitt, W.; Freudenberger, R. | Conference Paper, Journal Article |
| 2005 | Entscheidungsunterstützung für Geschäftsprozesse durch Simulation
Jessen, U.; Bernhard, J.; Bing, R. | Conference Paper |
| 2005 | Erfolgsfaktoren und Lösungen zur virtuellen Anlagenprojektierung
Özcan, A. | Conference Paper |
| 2005 | Experimentelle und numerische Untersuchung des Lichtbogenlaufverhaltens
Rümpler, C.; Reichert, F.; Stammberger, H.; Terhoeven, P.; Berger, F. | Conference Paper |
| 2005 | Formal specification and verification. Structures and techniques
Eschbach, R. | Dissertation |
| 2005 | The Fraunhofer MAVO FASPAS for smart system design
Melz, T.; Matthias, M.; Drossel, W.-G.; Sporn, D.; Schönecker, A.; Poigné, A. | Conference Paper |
| 2005 | Gesamtsystemsimulation aktiver Strukturen am Beispiel eines aktiven Interfaces
Atzrodt, H.; Herold, S.; Mayer, D.; Thomaier, M.; Melz, T. | Conference Paper |
| 2005 | Gestaltung und Optimierung von Produktions- und Logistiknetzwerken mit Hilfe von IT-unterstützter Simulation
Nayabi, K. | Conference Paper |
| 2005 | Gestaltung von Produktionsnetzwerken mit Werkzeugen der Digitalen Fabrik
Graupner, T.-D.; Mandel, J. | Conference Paper |
| 2005 | Grid system for solving computing bottlenecks in semiconductor industries at the example of an AMHS
Knoll, G.; Wesemann, M.; Sturm, R. | Conference Paper |
| 2005 | Information acquisition for model based analysis of large logistics networks
Bernhard, J.; Wenzel, S. | Conference Paper |
| 2005 | Integrated factory and logistics planning
Kapp, R.; Blond, J. le; Löffler, B.; Westkämper, E. | Conference Paper |
| 2005 | Integration of different approaches to simulate active structures for automotive applications
Herold, S.; Atzrodt, H.; Mayer, D.; Thomaier, M. | Conference Paper |
| 2005 | Integrierter Virtueller Schiffbau. Dokumentation zum Workshop InViS 2005. CD-ROM
: Lukas, U. von | Conference Proceedings |
| 2005 | IT-unterstützte Gestaltung und Optimierung von Produktions- und Logistiknetzwerken
Nayabi, K. | Conference Paper |
| 2005 | Kooperative Lebenslaufoptimierung von technischen Gütern durch Life Cycle Cost Vereinbarungen
Niemann, J.; Westkämper, E. | Conference Paper |
| 2005 | The logistics bench: Scalable logistics simulation from the supply chain to the production process
Kapp, R.; Löffler, B.; Wiendahl, H.-H.; Westkämper, E. | Journal Article |
| 2005 | Mehrwert durch Simulation
Hellmann, A.; Wloka, J. | Journal Article |
| 2005 | Modeling and simulation of burr formation - State of the art and future trends
Leopold, J.; Freitag, H.; Hoyer, K.; Schmidt, G. | Conference Paper |
| 2005 | Modeling of the plasma impedance in reactive magnetron sputtering for various target materials
Pflug, A.; Siemers, M.; Szyszka, B.; Kappertz, O.; Nyberg, T.; Berg, S. | Conference Paper |
| 2005 | Modellbildung und Regelstrategien für erdgasbetriebene Brennstoffzellen-Blockheizkraftwerke
Vetter, M. | Dissertation |
| 2005 | Modellbildung und Simulation in der Logistik
Bernhard, J. | Presentation |
| 2005 | Modellierung von Größeneinflüssen bei der Gratbildung
Stoll, A.; Neugebauer, Reimund; Leopold, J. | Conference Paper |
| 2005 | Modelling of anisotropic shrinkage during liquid phase sintering
Korn, K.; Kraft, T.; Riedel, H. | Conference Paper |
| 2005 | Modelling of perception
Roth-Koch, S. | Conference Paper |
| 2005 | Neue interaktive Werkzeuge für die Fertigungsplanung und -steuerung im Schiffbau
Wanner, M.-C.; Czarnietzki, R.; Zych, A. | Journal Article |
| 2005 | Neue Prozess- und Geräteentwicklungen: UV-Strahlungssimulation
Scheibe, A.; Schneider, M. | Book Article |
| 2005 | Numerical simulation of electrostatic spray-painting processes in the automotive industry
Ye, Q.; Domnick, J.; Scheibe, A.; Pulli, K. | Conference Paper |
| 2005 | Numerical simulation of resonant interaction of SCWs with acoustic modes in n-GaAs thin film
Garcia, B.A.; Grimalsky, V.; Gutierrez, D.E.; Durini, D. | Conference Paper |
| 2005 | Performance of compensation algorithm for direct-conversion receivers under finite wordlength constraints
Weber, R.; Jordan, M.; Christoffers, N.; Müller, H.-C.; Hosticka, B.J. | Conference Paper |
| 2005 | ProSim 05. The 6th International Workshop on Software Process Simulation and Modeling. Proceedings
: Pfahl, D.; Raffo, D.M.; Rus, I.; Wernick, P. | Conference Proceedings |
| 2005 | Selected Readings in Computer Graphics 2004. CD-ROM
: Schönhut, J.; Schaub, J.; Encarnacao, J.L. | Non Book Material |
| 2005 | Simulation des thermischen Bauteilverhaltens bei der Trockenbearbeitung
Dürr, H.; Hoyer, K.; Hanke, M. | Journal Article |
| 2005 | Simulation für die Blechverarbeitung - Möglichkeiten und Grenzen
Lieber, T.; Neugebauer, Reimund; Bräunlich, H. | Conference Paper |
| 2005 | Simulation of energy flow in hydraulic drives of forming machines
Neugebauer, Reimund; Klug, D.; Noack, S. | Journal Article |
| 2005 | Simulation vakuumbasierter Beschichtungsprozesse
Gottwald, B.; Klein, P.; Westkämper, E.; Gemmler, A. | Journal Article |
| 2005 | Simulation von Be- und Entladungsvorgängen bei RoRo-Fähren
Wenzel, H.; Lüsch, J.; Czarnietzki, R.; Wanner, M.-C. | Journal Article |
| 2005 | Simulation-based software process modeling and evaluation
Armbrust, O.; Berlage, T.; Hanne, T.; Lang, P.; Münch, J.; Neu, H.; Nickel, S.; Rus, I.; Sarishvili, A.; Stockum, S. van; Wirsen, A. | Book Article |
| 2005 | Simulation: Equipment, throughput and product mix
Wiechers, O. | Conference Paper |
| 2005 | Simulations in powder technology at Fraunhofer IWM
Kraft, T. | Journal Article |
| 2005 | Simulationsbaukasten für die Halbleiter- und Flachbildschirmfertigung
Bader, U. | Dissertation |
| 2005 | Simulative Untersuchung dezentraler Steuerungsverfahren komplexer Fördernetze
Liekenbrock, D. | Journal Article |
| 2005 | Software process modelling: Socio-technical perspectives
Waterson, P.; Weibelzahl, S.; Pfahl, D. | Book Article |
| 2005 | Standardprozesse als Grundlage für die Informationsbedarfsanalyse zur Modellierung von großen Netzen der Logistik
Bernhard, J.; Jodin, D.; Hömberg, K. | Book Article |
| 2005 | Systematic management of software product lines
Schmid, K.; Biffl, S. | Journal Article |
| 2005 | Untersuchungen zur Adsorption in Aktivkohlebehältern ottomotorisch betriebener Personenkraftwagen
Sohnemann, J. | Dissertation |
| 2005 | Using assistant systems for the logistical design of production enterprises
Kapp, R.; Löffler, B.; Wiendahl, H.-H.; Westkämper, E. | Conference Paper |
| 2005 | Verbesserte konstitutive Modelle zur Beschreibung von Umformprozessen - Numerische Implementierung, Experimente und Anwendungen
Riedel, H.; Andrieux, F.; Sun, D.-Z.; Walde, T. | Book Article |
| 2005 | Verfahren zur redundanten und distributiven Datenverarbeitung in drahtlosen Sensornetzen
Coers, A. | Dissertation |
| 2005 | Virtuell UV-härten - virtuell fertigen
Scheibe, A.; Gharemanpour, M.; Schneider, M.; Westkämper, E. | Journal Article |
| 2005 | Von der realen Fabrik in die Digitale Fabrik und zurück - ein Beispiel aus der Papier verarbeitenden Industrie
Graupner, T.-D. | Conference Paper |
| 2005 | Von der realen zur intelligenten Fabrik
Westkämper, E. | Conference Paper |
| 2005 | Vorteile eines dezentralen und autonomen Steuerungssystems
Ten Hompel, Michael | Book Article |
| 2005 | Web-based service for the integration of simulation and visualization
Bernhard, J.; Jessen, U. | Conference Paper |
| 2005 | Wirtschaftliche Herstellung von hohlen Getriebewellen durch umformtechnische Fertigungsverfahren
Lorenz, B.; Wagner, A. | Report |
| 2004 | The accuracy of hydraulically driven struts for production machines
Neugebauer, Reimund; Noack, S. | Conference Paper |
| 2004 | Adaptive surface triangulations for 3D process simulation
Nguyen, P.-H.; Burenkov, A.; Lorenz, J. | Conference Paper |