Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Integrated Flow for Reverse Engineering of Nanoscale Technologies
Lippmann, Bernhard; Werner, Michael; Unverricht, Niklas; Singla, Aayush; Egger, Peter; Dübotzky, Anja; Gieser, Horst; Rasche, Martin; Kellermann, Oliver; Graeb, Helmut
Conference Paper
2018Improving the error behavior of DRAM by exploiting its Z-channel property
Kraft, Kira; Sudarshan, Chirag; Mathew, Deepak M.; Weis, Christian; Wehn, Norbert; Jung, Matthias
Conference Paper
2018Obtaining as-built models of manufacturing plants from point clouds
Meidow, Jochen; Usländer, Thomas; Schulz, Karsten
Journal Article
2017Maintainability is a versatile quality attribute
Knodel, Jens; Naab, Matthias
Report
2017Nature inspired system analysis
Tenev, Vasil
Journal Article
2017Nature inspired system analysis
Tenev, Vasil
Report
2017Using run-time reverse-engineering to optimize DRAM refresh
Mathew, Deepak M.; Zulian, Eder F.; Jung, Matthias; Kraft, Kira; Weis, Christian; Jacob, Bruce; Wehn, Norbert
Conference Paper
2016Maintainability is a versatile quality attribute
Knodel, Jens; Naab, Matthias
Journal Article
2016Verfahren zur schnellen, digitalen Modellbildung für Inspektions- und Reengineeringprozesse
Grosser, Hendrik
: Stark, R.
Dissertation
2015Modularity - often desired, but rarely achieved
Knodel, Jens; Naab, Matthias; Weitzel, Balthasar
Journal Article
2014eCITY+. A tool to analyze software architectural relations through interactive visual support
Khan, Taimur; Humayoun, Shah Rukh; Amrhein, Karsten; Barthel, Henning; Ebert, Achim; Liggesmeyer, Peter
Conference Paper
2014Leitfaden zur optischen 3D-Messtechnik
: Sackewitz, Michael (Hrsg.)
Book
2014Reverse Engineering von Schiffsstrukturen
Grewe, Olaf; Geist, Michael
Journal Article
2013Procedural descriptions for analyzing digitized artifacts
Ullrich, Torsten; Schinko, Christoph; Schiffer, Thomas; Fellner, Dieter W.
Journal Article
2013RECoVar: A solution framework towards reverse engineering variability
Zhang, Bo; Becker, Martin
Conference Paper
2013RECoVar: A solution framework towards reverse engineering variability
Zhang, Bo; Becker, Martin
Report
2012Applying bioinformatics in the analysis of software variants
Tenev, Vasil; Duszynski, Slawomir
Conference Paper
2012Applying bioinformatics in the analysis of software variants
Tenev, Vasil; Duszynski, Slawomir
Report
2012Recovering variability information from the source code of similar software products
Duszynski, Slawomir; Becker, Martin
Conference Paper
2012Recovering variability information from the source code of similar software products
Duszynski, Slawomir; Becker, Martin
Report
2012Reverse Engineering
Rosemann, Bernd; Freiberger, Stefan
Book Article
2012Understanding deployment costs of enterprise systems. Towards architecture support in deployment decisions
Weitzel, Balthasar
Report
2012Understanding deployment costs of enterprise systems. Towards architecture support in deployment decisions
Weitzel, B.
Conference Paper
2011Analyzing the source code of multiple software variants for reuse potential
Duszynski, Slawomir; Knodel, Jens; Becker, Martin
Report
2011Analyzing the source code of multiple software variants for reuse potential
Duszynski, Slawomir; Knodel, Jens; Becker, Martin
Conference Paper
2011Iterative refinement of specification for component based embedded systems
Shahbaz, Muzammil; Shashidhar, K.C.; Eschbach, Robert
Report
2011Iterative refinement of specification for component based embedded systems
Shahbaz, Muzammil; Shashidhar, K.C.; Eschbach, Robert
Conference Paper
2011Reverse engineering of planning data for digitally supported MRO services
Grosser, H.; Kuhn, D.
Conference Paper
2011A scalable goal-oriented approach to software variability recovery
Duszynski, Slawomir
Report
2011A scalable goal-oriented approach to software variability recovery
Duszynski, Slawomir
Conference Paper
2011Variance analysis and comparison in computer-aided design
Ullrich, Torsten; Schiffer, Thomas; Schinko, Christoph; Fellner, Dieter W.
Conference Paper
2010Automatic discovery of unspecified behaviors in automotive control software
Shahbaz, Muzammil; Eschbach, Robert
Conference Paper
2010Reverse engineering ECUs of automotive components - a case study
Shahbaz, Muzammil; Eschbach, Robert
Conference Paper
2010Visualizing and analyzing software variability with bar diagrams and occurrence matrices
Duszynski, Slawomir
Report
2010Visualizing and analyzing software variability with bar diagrams and occurrence matrices
Duszynski, Slawomir
Conference Paper
2009Architecture-centric maintenance for embedded systems
Knodel, Jens; Mende, Thilo; Leszak, Marek; Meier, Gerald; Rückert, Christian; Schitter, Clemens; Guder, Frank
Report
2009CoVeR: Component-connector view reconstruction
Forster, Thomas
: Knauber, Peter (Supervisor); Knodel, Jens (Supervisor)
Master Thesis
2009From architecture to source code
Knodel, Jens
Report
2009From architecture to source code
Knodel, Jens; Muthig, Dirk
Report
2009From architecture to source code - how to ensure architecture compliance in the implemented system
Knodel, Jens
Journal Article
2009Reference architectures for software analysis platform extensions
Rost, Dominik
: Knauber, Peter (Supervisor); Knodel, Jens (Supervisor); Lindvall, Mikael (Supervisor)
Master Thesis
2009Reverse engineering for web-service re-engineering
Defounga, N.
: Stöckert, H.
Thesis
2009SAVE: Software Architecture Visualization and Evaluation
Duszynski, Slawomir; Knodel, Jens; Lindvall, Mikael
Conference Paper
2008A decade of reverse engineering at Fraunhofer IESE - the changing role of reverse engineering in applied research
Knodel, Jens; Muthig, Dirk
Report
2008A decade of reverse engineering at Fraunhofer IESE - the changing role of reverse engineering in applied research
Knodel, Jens; Muthig, Dirk
Conference Paper
2008High-Tech Solutions and Concepts - Hochtechnologielösungen und anwendbare Praxis-Konzepte
: Meyer, R.
Conference Proceedings
2008An integration of requirements and user interface specifications
Mukasa, Kizito Ssamula; Kaindl, Hermann
Conference Paper
2008Reversing the reasons for changes by a-posteriori recording of decisions made
Knodel, Jens; Muthig, Dirk; Forster, Thomas; Capilla, Rafael
Report
2007On reverse engineering of structural and behavioral views for architecture compliance checking
Weinmann, Jörg
: Rombach, H. Dieter (Supervisor); Lindvall, Mikael (Supervisor); Ganesan, Dharmalingam (Supervisor); Knodel, Jens (Supervisor)
Thesis
2006Assessing merge potential of existing engine control systems into a product line
Yoshimura, K.; Ganesan, D.; Muthig, D.
Conference Paper
2006Case studies of static software architecture evaluations
Knodel, J.; Lindvall, M.; Muthig, D.; Naab, M.
Journal Article
2006Defining a strategy to introduce a software product line using existing embedded systems
Yoshimura, K.; Ganesan, D.; Muthig, D.
Conference Paper
2006Reverse Engineering - Automatisierte Verfahren für die Produktentwicklung
Effenberger, Ira
Conference Paper
2006Reverse engineering in a reuse context
Knodel, J.; Koschke, R.; Mende, T.
Report
2006Starting a software product line by reengineering a set of existing product variants
Yoshimura, K.; Bayer, J.; Ganesan, D.; Muthig, D.
Conference Paper
2006Static evaluation of software architectures
Knodel, J.; Lindvall, M.; Muthig, D.; Naab, M.
Conference Paper
2005ADORE-AR: Software Architecture Reconstruction with Partitioning and Clustering
Girard, J.-F.
Dissertation
2005Analyzing the product line adequacy of existing components
Knodel, J.; Muthig, D.
Conference Paper
2005Asset recovery and their incorporation into product lines
Knodel, J.; John, I.; Ganesan, D.; Pinzger, M.; Usero, F.; Arciniegas, J.L.; Riva, C.
Report
2005Asset recovery and their incorporation into product lines
Knodel, J.; John, I.; Ganesan, D.; Pinzger, M.; Usero, F.; Arciniegas, J.L.; Riva, C.
Conference Paper
2005Combination of requirements recovery and architecture recovery for existing systems
Forster, T.; Ganesan, D.; Girard, J.-F.; Grund, M.; John, I.; Knodel, J.
Report
2005Comparing design alternatives from field-tested systems to support product line architecture design
Knodel, J.; Forster, T.; Girard, J.-F.
Conference Paper
2005EU-Project DETECT: New product design and engineering technologies based on next generation computed tomography
Effenberger, I.; Flisch, A.; Thierry, R.
Conference Paper
2005Identifying domain-specific reusable components from existing OO systems to support product line migration
Ganesan, D.; Knodel, J.
Conference Paper
2005Re-engineering of inhomogeneous coatings based on in-situ optical broadband monitoring data
Wilbrandt, S.; Stenzel, O.; Gäbler, D.; Kaiser, N.
Conference Paper
2005The reverse engineering technology form determination and form profiling in the product development
Roth-Koch, S.
Conference Paper
2005Static evaluation of software architectures
Knodel, J.; Lindvall, M.; Muthig, D.; Naab, M.
Report
2005A systematic approach for comparing and reusing design alternatives
Knodel, J.; Forster, T.; Girard, J.-F.
Journal Article
2004Architekturentwicklung, basierend auf existierenden Systemen
Bayer, J.; Girard, J.-F.; Knodel, J.; Kolb, R.; Muthig, D.
Book Article
2004Comparing design alternatives from field-tested systems to support product line architecture design
Knodel, J.; Forster, T.; Girard, J.-F.
Report
2004Definition of reference architectures based on existing systems
Bayer, J.; Forster, T.; Ganesan, D.; Girard, J.-F.; John, I.; Knodel, J.; Kolb, R.; Muthig, D.
Report
2004A formal approach for interoperability between mobile agent systems and component based architectures
Pinsdorf, U.
Conference Paper
2004A meta-model for fact extraction from Delphi source code
Knodel, J.; Calderon-Meza, G.
Conference Paper
2004Neue Verfahren zur Segmentierung und Feature-Extraktion in Messpunktwolken
Stotz, M.
Conference Paper
2004Request-driven reverse engineering for product lines
Knodel, J.; Girard, J.-F.
Conference Paper
2004Reverse Engineering verbindet realen und digitalen Prototypen
Roth-Koch, S.
Journal Article
2004Die Rolle von Mess- und Prüftechnik in Rapid Manufacturing
Modrich, K.-U.
Conference Paper
2004Segmentierung und Vereinfachung von Dreiecksnetzen durch Detektion theoretischer Kanten
Hirschbach, H.
: Klein, K. (Prüfer)
Master Thesis
2003Architecture recovery for product families
Pinzger, M.; Gall, H.; Girard, J.-F.; Knodel, J.; Riva, C.; Pasman, W.; Broerse, C.; Wijnstra, J.G.
Conference Paper
2003Definition of reference architectures based on existing systems
Bayer, J.; Ganesan, D.; Girard, J.-F.; Knodel, J.; Kolb, R.; Schmid, K.
Report
2003Improving fact extraction of framework-based software systems
Knodel, J.; Pinzger, M.
Conference Paper
2003Innovative Produktentwicklung
Modrich, K.-U.
Conference Paper
2003A meta-model for fact extraction from delphi source code
Knodel, J.; Calderon-Meza, G.
Conference Paper
2003Reconstruction of architectural views by design hypothesis
Knodel, J.
Journal Article
2003The reverse engineering construction of 3D models using the virtual reality
Effenberger, I.; Bolboaca, L.; Bulgaru, M.; Ioanoviciu, T.
Conference Paper
2002Euro-uRapid 2002
: Meyer, R.
Conference Proceedings
2002Industrial computed tomography for reverse engineering applications
Schuhmann, Norbert; Bolboaca, Lucia Ioana
Conference Paper
2002Object digitalization using a scanning fringe projection system
Zacher, M.; Krohne, I.; Glaser, U.; Pfeifer, T.
Conference Paper
2002Ein regelbasierter Beobachter zur prozessorientierten Integration betrieblicher Informationssysteme
Barnekow, T.
Dissertation
2002Reverse Engineering Technologie. Flächenrückführung
Roth-Koch, S.
Conference Paper
2002Software evolution in practice. Adding web functionality to a legacy system
Anastasopoulos, M.; Bayer, J.; Bunse, C.; Girard, J.-F.; John, I.; Muthig, D.; Sody, P.; Tolzmann, E.
Report
2001Erweiterung eines graphischen Editors zur Verbesserung von Architektur-Wiedererkennung
Hettesheimer, R.
: Rombach, H.D. (Prüfer); Girard, J.-F. (Prüfer)
Thesis
2001New methods for feature-line extraction from point clouds
Schuhmann, N.
Conference Paper
2001uRapid 2001 - International User's Conference on Rapid Prototyping & Rapid Tooling & Rapid Manufacturing
: Kühnle, H.; Meyer, R.
Conference Proceedings
2000Data Exchange in Bauhaus
Czeranski, J.; Eisenbarth, T.; Kienle, H.M.; Koschke, R.; Plödereder, E.; Simon, D.; Zhang, Y.; Girard, J.-F.; Würthner, M.
Conference Paper
2000Filigrane (FlexIbLe IPR for Software AGent ReliANcE)
Jalali-Sohi, M.; Hachez, G.; Vasserot, C.
Conference Paper
2000FILIGRANE (FlexIble IPR for Software AGent ReliANcE) Protocol. A security protocol for trading of mobile code in Internet
Jalali-Sohi, M.
Conference Paper
2000uRapid2000, International User's Conference on Rapid Prototyping & Rapid Tooling & Rapid Manufacturing. Proceedings
: Meyer, R.; Kühnle, H.
Book
1999Entwicklungstendenzen im Rapid Product Development
Rauh, W.; Koch, K.U.; Schuhmann, N.
Conference Paper
1999A Metric-based Approach to Detect Abstract Data Types and State Encapsulations
Girard, J.-F.; Koschke, R.; Schied, G.
Journal Article
1999Virtuelle Produkte und Rapid Prototyping
Rauh, W.
Conference Paper
1998Implementing a Concept Analysis Tool for Identifying Abstract Data Types in C code
Graudejus, H.
: Rombach, H.D. (Prüfer); Girard, J.-F. (Prüfer)
Thesis
1998An Intermediate Representation for Integrating Reverse Engineering Analyses
Koschke, R.; Girard, J.-F.; Würthner, M.
Conference Paper
1997DARE: Domain-Augmented ReEngineering
DeBaud, J.-M.
Conference Paper
1997A Metric-based Approach to Detect Abstract Data Types and State Encapsulations
Girard, J.-F.; Koschke, R.; Schied, G.
Conference Paper
1997Vereinigung von Punktewolken für eine effiziente Flächenrückführung
Neugebauer, P.J.
Conference Paper
1996Lessons from a Domain-Based Reengineering Effort
DeBaud, J.-M.
Conference Paper
1996Scanning and reconstruction of work pieces from range images
Neugebauer, P.J.
Conference Paper
1996Verstehen von Software
Witschurke, R.; Löwe, M.
Book Article
1996Virtual Cloning - Dokumentation in der Denkmalpflege
Neugebauer, P.J.
Conference Paper
1995Ein Arbeitsplatz für das Verstehen von Programmsystemen
Witschurke, R.
Book
1995Digitalisierung von 2D- und 3D-Teilen, Reverse Engineering
Rauh, W.
Conference Paper
1995From master pattern to prototype via reverse engineering and rapid prototyping
Kunze, H.-D.; Pintat, T.; Greulich, M.; Greul, M.
Journal Article
1995Programmanalyse - interaktives Reverse Engineering
Witschurke, R.
Journal Article
1992Wiederverwendung in der Informationsverarbeitung - Re-use, Re-engineering, Reverse Engineering
Witschurke, R.
Book

 

<