Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2017Applications of metal foam as catalyst carrier
Walther, Gunnar; Gaitzsch, Uwe; Büttner, Tilo; Kieback, Bernd; Weißgärber, Thomas; Kolvenbach, Robin; Lincke, Marc
Conference Paper
2016On- and offline ultrasonic characterization of components built by SLM additive manufacturing
Rieder, Hans; Spies, Martin; Bamberg, Joachim
Conference Paper
2014Microcladding of hypereutectic Al-Si alloys: technological aspects and structure features
Grigoriev, Sergej Nikolaevich; Tarasova, Tatyana Vasilievna; Gvozdeva, Galina Olegovna; Nowotny, Steffen
Journal Article
2014Structure formation of hypereutectic Al-Si-alloys produced by laser surface treatment
Grigoriev, Sergey Nikolaevich; Tarasova, Tatyana Vasilievna; Gvozdeva, Galina Olegovna; Nowotny, Steffen
Journal Article
2008Ionenstrahlpräparation - ein treffliches Werkzeug zur Charakterisierung der Zwischenprodukte des schmelzpulvermetallurgischen Aluminiumschäumverfahrens
Hohlfeld, J.; Lies, C.; Höhn, S.; Obenaus, P.
Journal Article
2008Rolling contact fatigue of HVOF-sprayed WC-based hardmetal coatings
Lipp, K.; May, U.; Berger, L.-M.; Jordan, C.
Conference Paper
2007Evaluation of the fatigue behaviour of new PM-materials for highly loaded gears
Lipp, K.; Bender, H.J.; Baumgaertner, F.; Castro Pinto, F.; Sonsino, C.M.
Conference Paper
2007Pulvermetallurgie
Reschke, S.
Journal Article
2007Pulvermetallurgie
Reschke, S.
Journal Article
2006Fatigue design principles for sintered steel components
Sonsino, C.M.
Journal Article
2005Fatigue design of PM-gears under consideration of herzian pressure with sliding and tooth bending
Sonsino, C.; Lipp, K.
Conference Proceedings
2005Werkstofftrends: Pulvermetallurgie
Reschke, S.; Kohlhoff, J.; Notthoff, C.; Kretschmer, T.
Journal Article
2004Design of PM-gears basing on local bending and rolling contact fatigue data
Lipp, K.
Conference Paper
2004Static and fatigue properties of cold and warm compacted Alumix 431 alloy (Al-5.5 Zn-2.5 Mg-1.5 Cu)
Eksi, A.; Velti, G.; Petzoldt, F.; Lipp, K.; Sonsino, C.M.
Conference Paper
2004Tensile and fatigue properties of cold and warm compacted Alumix 431 alloy
Eksi, A.; Veltl, G.; Petzoldt, F.; Lipp, K.; Sonsino, C.M
Journal Article
2003Design for roling contact fatigue
Lipp, K.; Hoffmann, G.
Journal Article
2003Fatigue design concepts for P/M parts and required material data
Sonsino, C.M.
Book
2003Parameters influencing the fatigue strength of PM Steel components
Sonsino, C.M.
Conference Proceedings
2003Processing techniques for functionally graded materials
Kieback, B.; Neubrand, A.; Riedel, H.
Journal Article
2002Substitution of conventionally double pressed and double sintered synchronizer hubs by warm powder compaction
Ratzi, R.; Sonsino, C.M.
Conference Paper
2001Influence of notches on fatigue strength of high performance PM materials
Engström, U.; Lipp, K.; Sonsino, C.M.
Conference Paper
2000Cost reduction by using new Ni-free PM steels
Lipp, K.; Bas, J.; Blanchard, C.; Johansson, M.; Baum, U.
Conference Paper
1999Fatigue behaviour of sintered materials and components under operational service
Sonsino, C.M.
Conference Paper
1999Kostenreduzierung durch nickelfreie Sinterstähle
Lipp, K.; Baum, U.
Conference Paper
1999Rolling contact fatigue properties of selected PM-materials for gear-box applications
Sonsino, C.M.; Lipp, K.
Report
1999Rolling contact fatigue. Component design and testing for P/M applications
Hoffmann, G.; Sonsino, C.M.; Michaelis, K.
Report
1998Development of corrosion. Fatigue resistant diffusion. Bonded pump impellers from stainless PM steels
Sonsino, C.M.; Zieschang, R.; Arnhold, V.; Sandritter, H.H.; Gonia, D.
Conference Paper
1998Development of diffusion - bonded pump impellers made from a corrosion - fatigue resistant PM' steel
Sonsino, C.M.; Zieschang, R.; Hofmann, B.; Molinari, A.; Sandritter, K.H.; Persson, M.
Report
1998Fatigue behaviour of sintered materials and components under operational service
Sonsino, C.M.
Conference Paper
1998Fatigue design. Testing, quality reliability and safety on the example of automotive PM' components
Sonsino, C.M.
Conference Paper
1998Materials technology drives impeller design
Sonsino, C.M.
Journal Article
1998Metal foaming by a powder metallurgical method. Production, properties and applications
Yu, C.J.; Eifert, H.; Banhart, J.; Baumeister, J.
Journal Article
1998PM looks forward to pump impeller role
Sonsino, C.M.; Zieschang, R.; Arnhold, V.; Hofmann, B.; Gonia, D.; Sandritter, K.H.
Journal Article
1997Aluminiumschäume und ihre Eigenschaften
Weber, M.; Baumeister, J.; Banhart, J.
Conference Paper
1997Competitive advantages by near-net-shape manufacturing. Papers presented at the Conference NNS '97
: Kunze, H.-D.
Conference Proceedings
1997Effect of process parameters on the microstructure and properties of TiC dispersion strengthened copper alloys
Weißgärber, T.; Sauer, C.; Püsche, W.; Kieback, B.; Dehm, G.; Mayer, J.
Conference Paper
1997Evaluation of different approaches for the production of highly porous steel
Weber, M.; Knuewer, M.
Conference Paper
1997Fatigue design. Testing, quality reliability and safety on the example of automotive PM' components
Sonsino, C.M.
Conference Paper
1997Simultaneous Engineering am Beispiel der Entwicklung von gesinterten Fahrzeugpleueln
Sonsino, C.M.; Hoffmann, E.; Arnhold, V.
Conference Paper
1997Überblick: Verfahren zur Herstellung von Metallschäumen
Baumeister, J.
Conference Paper
1996Development of high-strength P/M steels with optimized microstructure by new alloying and sintering techniques
Brandt, U.; Sonsino, C.M.; Engström, U.; Ernst, E.; Hoffmann, E.
Conference Paper
1996Fatigue design of high loaded PM parts. Part 1
Sonsino, C.M.
Journal Article
1996Fatigue design of high loaded PM parts. Part 2
Sonsino, C.M.
Journal Article
1996How sintering time and temperature influence fatigue
Lindner, K.-H.; Sonsino, C.M.
Book Article
1996Pressing and sintering in powder technology
Riedel, H.
Conference Paper
1995Binder design and process control for high performance MIM-materials
Petzoldt, F.; Eifert, H.; Hartwig, T.; Veltl, G.
Conference Paper
1995Challenges for metal injection molding technology
Petzoldt, F.; Eifert, H.; Hartwig, T.; Veltl, G.
Conference Paper
1995Neuere Entwicklungen beim Metallpulverspritzguß
Petzoldt, F.; Eifert, H.; Hartwig, T.; Veltl, G.
Conference Paper
1995Rapid metal tooling
Klocke, F.; Celiker, T.; Song, Y.-A.
Conference Paper
1995Ultrafeine Pulver - Herstellung, Verarbeitung und Anwendungen
Günther, B.; König, T.; Meisel, R.L.
Conference Paper
1994Einfluß der Sinterzeit und -temperatur auf das Schwingfestigkeitsverhalten des diffusionslegierten Sinterstahls Fe-4.0 Prozent Ni-1.5 Prozent Cu-0.5 Prozent Mo plus 0.6 Prozent C.
Lindner, K.-H.; Sonsino, C.M.
Journal Article
1994Fatigue design for PM components. Manual for design and production engineers.
Esper, F.J.; Sonsino, C.M.
Book
1994Finite Element Simulation für HIP-Bauteile
Petzoldt, F.; Khazami-Zahdeh, M.
Book Article
1994Highly porous materials and parts by P/M technology
Kunze, H.D.; Hartwig, T.; Veltl, G.
Conference Paper
1994How sintering time and temperature influence fatigue
Lindner, K.-H.; Sonsino, C.M.
Journal Article
1994How sintering time and temperature influence fatigue
Lindner, K.-H.; Sonsino, C.M.
Conference Paper
1994Investigation of binders for MIM of titanium
Kunze, H.-D.; Hartwig, T.; Veltl, G.
Conference Paper
1994Metallschaum - ein Werkstoff mit Perspektiven
Banhart, J.; Baumeister, J.; Weber, M.
Journal Article
1994Metallschaum - neuer Werkstoff mit Potential
Banhart, J.; Baumeister, J.; Weber, M.
Journal Article
1994Metallschaum wird industrietauglich
Banhart, J.; Baumeister, J.; Weber, M.
Journal Article
1994Metallschäume
Weber, M.; Baumeister, J.; Banhart, J.
Journal Article
1994Methods for the production of metallic foams
Weber, M.; Baumeister, J.; Banhart, J.; Kunze, H.-D.
Conference Paper
1994Numerical simulation of die pressing and sintering - development of constitutive equations
Riedel, H.; Meyer, D.; Svoboda, J.; Zipse, H.
Journal Article
1994Numerical simulation of die pressing and sintering-development of constitutive equations
Riedel, H.; Svoboda, J.; Zipse, H.
Conference Paper
1994Schwingfestigkeit des diffusionslegierten Sinterstahls Fe-4.0%Ni-1.5%Cu-0.5%Mo+0.6%C in Abhängigkeit von der Sinterzeit und -Temperatur.
Sonsino, C.M.
Book
1994Selected mechanical and physical properties of metal foams
Weber, M.; Baumeister, J.; Banhart, J.; Kunze, H.-D.
Conference Paper
1993Mechanical alloying reduces wear of self-lubricating materials
Günther, B.; Kunze, H.-D.; Veltl, G.; Takahashi, K.
Journal Article
1993P/M technology for the production of metal foams
Kunze, H.-D.; Baumeister, J.; Banhart, J.; Weber, M.
Journal Article
1993Possibilities for the production of components of metal foams
Kunze, H.-D.; Baumeister, J.; Banhart, J.; Weber, M.
Book Article
1993Preparation of nanostructured materials by PM methods
Günther, B.
Conference Paper
1993Preparation of self-lubricating wear resistant materials by mechanical alloying
Günther, B.; Kunze, H.-D.; Veltl, G.; Takahashi, K.
Conference Paper
1993Thermal stability of ultrafine grained and nanocrystalline metals
Kumpmann, A.; Günther, B.; Kunze, H.-D.
Conference Paper
1992Improvement of mechanical properties of diffusion- and prealloyed sintered steels by heat treatments.
Sonsino, C.M.; Schlieper, G.
Journal Article
1992Investigations of different stainless steel MIM feedstocks with a novel binder system
Petzoldt, F.; Veltl, G.; Kunze, H.-D.; Seidel, R.
Conference Paper
1991Present level of knowledge on fatigue strength of sintered steels
Sonsino, C.M.
Conference Paper
1991Schwingfestigkeit von Verschraubungen aus Sinterwerkstoffen
Lipp, K.
Book
1990Development of sintered con-rods for automotive engines
Richter, K.; Lawcock, R.; Whittaker, D.; Schlieper, G.; Tengzelius, J.; Lipp, K.; Sonsino, C.M.
Conference Paper
1990Evaluation of different heat treatment methods for fatigue design of notched and differently loaded PM' parts
Esper, F.J.; Sonsino, C.M.
Conference Paper
1990Fatigue design for powder metallurgy
Sonsino, C.M.
Conference Paper
1990Fatigue design for powder metallurgy
Sonsino, C.M.
Journal Article
1990Fatigue design for powder metallurgy
Sonsino, C.M.
Journal Article
1990Influence of As-sintered material strength on the improvement of fatigue behaviour by surface rolling
Tengzelius, J.; Schlieper, G.; Sonsino, C.M.
Conference Paper
1981Characteristic properties of powder metallurgical materials relevant to fatigue design
Esper, F.J.; Leuze, G.; Sonsino, Cetin Morris
Journal Article