Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Influence of Basic Process Parameters on Mechnical and Internal Properties of 316L Steel in SLM Process for Renishaw AM400
Hajnys, Jiri; Pagac, Marek; Petru, Jana; Kotera, Ondrej; Scholz, Sebastian
Journal Article
2019Non-destructive investigations of pore morphology of micropore carbon materials
Stec, Jakub; Tarasiuk, Jacek; Nagy, Stanislaw; Smulski, Rafal; Gluch, Jürgen; Filipek, Robert
Journal Article
2019Understanding Thickness and Porosity Effects on the Electrochemical Performance of LiNi0.6Co0.2Mn0.2O2-based Cathodes for High Energy Li-Ion Batteries
Heubner, Christian; Nickol, Alexander; Seeba, Jann; Reuber, Sebastian; Junker, Nils; Wolter, Mareike; Schneider, Michael; Michaelis, Alexander
Journal Article
2018Porosity of LMD manufactured parts analyzed by Archmimedes method and CT
Marko, Angelina; Raute, Julius; Linaschke, Dorit; Graf, Benjamin; Rethmeier, Michael
Journal Article
2018Thermo-Mechanical Measurement Approach of Ag-sintered Joints for Power Electronics
Metasch, René; Meier, Karsten; Röllig, Mike
Conference Paper
2017Dependencies between internal structure and mechanical properties of spray dried granules - experimental study and DEM simulation
Eckhard, Susanna; Fries, Manfred; Antonyuk, Sergiy; Heinrich, Stefan
Journal Article
2017Efficiency of Ni nanoparticles supported on hierarchical porous nitrogen-doped carbon for hydrogenolysis of kraft lignin in flow and batch systems
Lama, Sandy M.G.; Pampel, Jonas; Fellinger, Tim-Patrick; Beškoski, Vladimir P.; Slavković-Beškoski, Latinka; Antonietti, Markus; Molinari, Valerio
Journal Article
2016Out-of-furnace oxidation of SiCN polymer-derived ceramic aerogel pyrolized at intermediate temperature (600-800 °C)
Zera, E.; Nickel, Winfried; Kaskel, Stefan; Sorarù, G.D.
Journal Article
2014Mechanical properties of porous MgO substrates for membrane applications
Lipińska-Chwałek, Marta; Kiesel, Lutz; Malzbender, Jürgen
Journal Article
2014Modeling of the influence of pore morphology on damage behavior of an aluminum die casting alloy
Sun, D.-Z.; Ma, Y.S.; Andrieux, F.
Conference Paper
2014Modification of the mechanical granule properties via internal structure
Eckhard, Susanna; Fries, Manfred; Teipel, Ulrich; Antonyuk, Sergiy; Heinrich, Stefan
Journal Article
2014Steady-state creep of porous and an extended analysis on the creep of dense BSCFZ perovskite
Pećanac, Goran; Kiesel, Lutz; Malzbender, Jürgen
Journal Article
2014Variation der mechanischen Eigenschaften von Sprühgranulaten über die innere Struktur
Eckhard, Susanna; Fries, Manfred; Teipel, Ulrich
Journal Article
2013Microstructure-permeability relation of porous beta-Si3N4 ceramics
Topates, G.; Mammitzsch, L.; Petasch, U.; Adler, J.; Kara, F.; Mandal, H.
Journal Article
2012A family of 2D and 3D coordination polymers involving a trigonal tritopic linker
Hauptvogel, Ines Maria; Bon, Volodymyr; Grünker, Ronny; Baburin, Igor A.; Senkovska, Irena; Mueller, Uwe; Kaskel, Stefan
Journal Article
2012A highly porous metal–organic framework, constructed from a cuboctahedral super-molecular building block, with exceptionally high methane uptake
Stoeck, Ulrich; Krause, Simon; Bon, Volodymyr; Senkovska, Irena; Kaskel, Stefan
Journal Article
2011High-throughput screening: Speeding up porous materials discovery
Wollmann, Philipp; Leistner, Matthias; Stoeck, Ulrich; Grünker, Ronny; Gedrich, Kristina; Klein, Nicole; Throl, Oliver; Grählert, Wulf; Senkovska, Irena; Dreisbach, Frieder; Kaskel, Stefan
Journal Article
2011Methods of quantification of the internal structures of spray granules
Höhn, S.; Eckhard, S.; Fries, M.; Matthey, B.; Herrmann, M.; Michaelis, A.
Journal Article
2011On the nanostructure of micrometer-sized cellulose beads
Thünemann, A.F.; Klobes, P.; Wieland, C.; Bruzzano, S.
Journal Article
2009Highly dense amorphous Nb2O5 films with closed nanosized pores
Vinnichenko, M.; Rogozin, A.; Grambole, D.; Munnik, F.; Kolitsch, A.; Möller, W.; Stenzel, O.; Wilbrandt, S.; Chuvilin, A.; Kaiser, U.
Journal Article
2009Investigations of the correlation between granule microstructure and deformation behaviour
Eckhard, S.; Nebelung, M.
Conference Paper
2009Some aspects of granulation of colloidal disperse ceramic material mixtures
Nebelung, M.; Fries, M.
Conference Paper
20083D characterisation and modelling of foam structures
Redenbach, C.; Sych, T.; Schladitz, K.; Godehardt, M.; Wirjadi, O.; Spies, M.
Poster
2008Non-destructive testing of die-casting components of non-ferrous metals for surface-near porosity by high-frequency ultrasound
Hirsekorn, S.; Rabe, U.; Bruche, D.; Grov, N.; Kinzler, T.; Arnold, W.
Conference Paper
2007Ice-mould freeze casting of porous ceramic components
Moritz, T.; Richter, H.-J.
Journal Article
2006Effects of the homogeneity of particle coordination on solid-state sintering of transparent alumina
Krell, A.; Klimke, J.
Journal Article
2006The influence of porosity on the electrical properties of liquid-phase sintered silicon carbide
Ihle, J.; Martin, H.-P.; Herrmann, M.; Obenaus, P.; Adler, J.; Hermel, W.; Michaelis, A.
Journal Article
2006Nondestructive characterization of fresh concrete and other porous materials with one-sided access NMR
Wolter, B.; Dobmann, G.; Knapp, F.; Marko, A.
Conference Paper
2004Tensile and fatigue properties of cold and warm compacted Alumix 431 alloy
Eksi, A.; Veltl, G.; Petzoldt, F.; Lipp, K.; Sonsino, C.M
Journal Article
2001Influence of notches on fatigue strength of high performance PM materials
Engström, U.; Lipp, K.; Sonsino, C.M.
Conference Paper
2001Nanoindentation hardness of submicrometer alumina ceramics
Krell, A.; Schädlich, S.
Journal Article
2001Three-dimensional time domain modeling of ultrasonic wave propagation in concrete in explicit consideration of aggregates and porosity
Schubert, F.; Köhler, B.
Journal Article
1999Dense silicon carbonitride ceramics by pyrolysis of cross-linked and warm pressed polysilazane powders
Konetschny, C.; Reschke, S.; Riedel, R.; Fasel, C.; Galusek, D.
Journal Article
1999Permeation of Oxygen and Moisture through Vacuum Web Coated Films
Moosheimer, U.; Langowski, H.-C.
Conference Paper
1999Studies on the carbothermal preparation of titanium carbide from different gel precursors
Preiss, H.; Berger, L.-M.; Schultze, D.
Journal Article
1998Morphology and performance of screen printed cathodes in the planar SOFC
Kuznecov, M.; Otschik, P.; Eichler, K.; Schaffrath, W.
Conference Paper
1998Rolling contact fatigue behaviour of sintered steels. Endurable Hertzian pressures and damage mechanisms
Lipp, K.; Sonsino, C.M.; Pohl, D.; Hock, S.
Conference Paper
1998Si/C/N amorphous bulk ceramics by axial pressing of polyhydridomethylsilazane at elevated temperature
Galusek, D.; Riedel, R.; Reschke, S.; Konetschny, C.
Journal Article
1997Bedeutung der Porosität für die Eigenschaften von Gipserhärtungsprodukten
Sattler, H.
Journal Article
1997Grundlegende Untersuchungen zur Herstellung von Schaumaluminium
Baumeister, J.; Weber, M.; Banhart, J.; Petzoldt, F.
Conference Paper
1997Quantitative image analysis techniques for the evaluation of porosity
Laz, P.J.
Book
1996Damping properties of foamed Aluminium
Banhart, J.; Baumeister, J.; Weber, M.
Journal Article
1995Anwendung von Mikrowellen zur Materialcharakterisierung und Fehlerrekonstruktion dielektrischer Werkstoffe
Walle, G.; Becker, R.; Schneider, R.; Mayer, K.
Conference Paper
1995Elastisch-plastisches Materialverhalten von Gußeisen bei quasistatischer und zyklischer Belastung unter Berücksichtigung der bimodularen Eigenschaften im Zug- und Druckbereich und der Werkstoffporosität
Günther, H.; Brandt, U.; Sonsino, C.M.
Journal Article
1995Fatigue behaviour of aluminium castings. Effect of porosity on design
Sonsino, C.M.
Conference Paper
1994Beiträge zum Sinterverhalten von LaCrO3-Pulvern
Eichler, K.; Otschik, P.; Jaenicke-Rößler, K.
Book
1994Sinterability on doped lanthanum chromite
Eichler, K.; Syskakis, E.; Otschik, P.; Naoumidis, A.; Jaenicke-Rößler, K.
Conference Paper
1993Characterization of positioning tolerances for welding with laser radiation and description of possibilities for compensation in materials' processing
Nitsch, H.; Berkmanns, J.; Dahmen, M.; Funk, M.; Herziger, G.; Beyer, E.
Conference Paper
1993Determination of the dynamic material properties of shock-loaded silicon-nitride
Nahme, H.; Hohler, V.; Stilp, A.J.
Conference Paper
1993Fatigue strength and applications of cast aluminium alloys with different degrees of porosity.
Sonsino, C.M.; Ziese, J.
Journal Article
1993Non-destructive characterization of plasma-sprayed ZrO2 coatings by ultrasonic surface waves
Schneider, D.; Schwarz, T.; Buchkremer, H.-P.; Stöver, D.
Journal Article
1991Einfluß der Laserbehandlung auf das Korrosionsverhalten vakuumplasmagespritzter Titan- und Niobschichten
Lugscheider, E.; Hofmann, D.; Jansen, F.; Nicoll, A.R.; Kreutz, E.W.; Wissenbach, K.; Gasser, A.
Conference Paper
1991Einfluß der Porosität auf das Schwingfestigkeitsverhalten von Aluminium-Gußwerkstoffen. Tl.1
Dieterich, K.; Sonsino, C.M.
Journal Article
1991Schwingfestigkeit von Aluminiumgusslegierungen in verschiedenen Porositätszuständen und Aussagen zum Bauteilverhalten
Ziese, J.; Sonsino, C.M.
Book Article
1990Einfluß der Porosität auf das Schwingfestigkeitsverhalten von Aluminium-Gußwerkstoffen
Sonsino, C.M.; Dieterich, K.
Report
1990Nondestructive stress and microstructure analysis by ultrasonic
Höller, P.; Schneider, E.; Willems, H.
Conference Paper
1990Welding of thick metal sheets of up to 25 mm with 29 kW laser power
Funk, M.; Köhler, U.; Behler, K.; Beyer, E.
Conference Paper
1989Nondestructive characterization of material properties by an automated ultrasonic technique
Panakkal, J.P.; Peukert, H.; Willems, H.
Conference Paper
1989Nondestructive investigation of fibre reinforced composites by X-ray computed tomography
Hirsekorn, S.; Maisl, M.; Reiter, H.; Scherer, T.
Conference Paper
1989Nondestructive monitoring of fabrication parameters of sintered iron powder compacts using ultrasonics
Panakkal, J.P.; Willems, H.
Journal Article
1989Wechselwirkungen zwischen Weißblechverpackung und Füllgut
Hollaender, J.; Sedlmayr, M.
Journal Article
1987Früherkennung von Kriechschädigung mittels Ultraschall-Verfahren
Willems, H.
Conference Paper
1987The influence of high-temperature creep on the ultrasonic velocity in alloy 800H
Willems, H.
Conference Paper