Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Dynamic compression of 3D printed metallic microstructures with in-situ X-ray imaging
Jäcklein, Martin; Kappe, Konstantin; Pfaff, Aron; Bierdel, Marius; Hoschke, Klaus; Wickert, Matthias; Riedel, Werner; Forster, Jacob; Eakins, Daniel; Escauriza, Emilio; Smith, Liam; Rack, Alexander
Conference Paper
2019An experimental and numerical survey into the potential of hybrid foams
Hohe, Jörg; Beckmann, Carla; Böhme, Wolfgang; Weise, Jörg; Reinfried, Matthias; Luthardt, Fabian; Rapp, Florian; Diemert, Jan
Journal Article
2019Influence of Sacrificial Layer Germanium Content on Stacked-Nanowire FET Performance
Klüpfel, Fabian J.
Journal Article
2019Radiation testing of optical coatings: Better testing with simulations
Kuhnhenn, Jochen; Steffens, Michael; Baum, Max
Conference Paper
2018Analysis of form deviation in non-isothermal glass molding
Kreilkamp, Holger; Grunwald, Tim; Dambon, Olaf; Klocke, Fritz
Conference Paper
2018Build-up of internal cake in layered filtering media
Kirsch, Ralf; Osterroth, Sebastian; Rief, Stefan
Conference Paper
2018Combined depth and cake filtration model coupled with flow simulation for flat and pleated filters
Iliev, O.; Kirsch, R.; Osterroth, S.
Journal Article
2018FEM simulation for the development of data-based process models in mechanical joining technology
Falk, Tobias; Kropp, Thomas; Jäckel, Mathias
Conference Paper
2018Micromechanical investigation and numerical simulation of fatigue crack formation in welded joints
Beckmann, C.; Kennerknecht, T.; Preußner, J.; Farajian, M.; Luke, M.; Hohe, J.
Journal Article
2018Numerical simulation of thermal supported self-pierce riveting of an ultra high-strength aluminium alloy
Jäckel, Mathias; Maul, Steven; Kraus, Christian; Drossel, Welf-Guntram
Conference Paper
2018A probabilistic elasticity model for long fiber reinforced thermoplastics with uncertain microstructure
Hohe, Jörg; Paul, Hanna; Beckmann, Carla
Journal Article
2018A surface tension and wetting model for the δ+-SPH scheme
Bierwisch, C.
Conference Paper
20173D simulation of silicon-based single-electron transistors
Klüpfel, Fabian J.; Pichler, Peter
Conference Paper
2017Assessment of the protective properties of two different UHA steels based on material testing and numerical simulation
Früh, Patrick; Heine, Andreas; Riedel, Werner
Journal Article, Conference Paper
2017Experimental study and numerical simulation on bond between FFRP and CFRC components
Yan, L.; Chouw, N.; Kasal, B.
Journal Article
2017Investigation and improvement of composite T-joints with metallic arrow-pin reinforcement
Heimbs, Sebastian; Jürgens, Michael; Breu, Christoph; Ganzenmüller, Georg; Wolfrum, Johannes
Conference Paper
2017Modelling of Ultrasonic Scattering in Polycrystals Aiming for Tools to Simulate Experiments in NDT&E
Hirsekorn, Sigrun; Dobrovolskij, Dascha; Spies, Martin
Conference Paper
2017Numerical investigation of phase change material utilization options for the thermal management of cylindrical Li-Ion-batteries
Gamisch, S.; Gschwander, S.
Conference Paper
2017Numerical simulation of gas hydrate exploitation from subsea reservoirs in the Black Sea
Janicki, Georg; Schlüter, Stefan; Hennig, Torsten; Deerberg, Görge
Journal Article, Conference Paper
2017Simulating hypervelocity impact phenomena with discrete elements
Watson, Erkai; Steinhauser, Martin O.
Journal Article, Conference Paper
2017SPH simulations of magnetorheological abrasive flow machining at a microscopic scale
Mohseni-Mofidi, S.; Nutto, C.; Lagger, H.; Bierwisch, C.
Conference Paper
2016Approaches for structural simulation of additively manufactured metal parts
Schafstall, Hendrik; Khazan, Pavel; Mehmert, Patrick; Töppel, Thomas; Kordaß, Richard
Conference Paper
2016Combined depth and cake filtration coupled to flow simulation
Iliev, O.; Kirsch, R.; Osterroth, S.
Conference Paper
2016Experimental investigations of twin-fluid atomization of cavity wax
Domnick, Joachim; Gruseck, Daniel; Hildenbrand, Stefan; Knee, Philipp; Pfiz, Dennis; Tiedje, Oliver
Conference Paper
2016Investigation on air entrapment in paint drops under impact onto dry solid surfaces
Ye, Qiaoyan; Tiedje, Oliver
Book Article
2016Investigations of net-shape forming processes for magnetic materials
Böhm, Andrea; Bergmann, Markus; Drossel, Welf-Guntram
Conference Paper
2016Numerical simulation of the fluid flow and poroelastic deformation in round pleated filter cartridges
Iliev, D.; Iliev, O.; Kirsch, R.
Conference Paper
2016Optimization of 4H-SiC UV photodiode performance using numerical process and device simulation
Burenkov, Alex; Matthus, Christian David; Erlbacher, Tobias
Journal Article
2016Simulation of silicon-dot-based single-electron memory devices
Klüpfel, Fabian Johannes; Burenkov, Alexander; Lorenz, Jürgen
Conference Paper
2016Simulations and practical experience in the optimisation of paint film levelling
Seeler, Fabian; Hager, Christian; Tiedje, Oliver; Schneider, Matthias
Abstract
2016Suspension modeling using smoothed particle hydrodynamics: Accuracy of the viscosity formulation and the suspended body dynamics
Polfer, P.; Kraft, T.; Bierwisch, C.
Journal Article
2015Determination of state of charge-dependent asymmetric Butler-Volmer kinetics for LixCoO2 electrode using GITT measurements
Hess, Andreas; Roode-Gutzmer, Quirina; Heubner, Christian; Schneider, Michael; Michaelis, Alexander; Bobeth, Manfred; Cuniberti, Gianaurelio
Journal Article
2015Experimental and numerical studies to enhance the reproducibility of corrosion testing
Tiedje, Oliver; Ye, Qiaoyan; Knee, Philipp; Kob, Derk
Conference Paper
2015Influence of hydrodynamic drag model on shear stress in the simulation of magnetorheological fluids
Lagger, H.G.; Breinlinger, T.; Korvink, J.G.; Moseler, M.; Renzo, A. di; Maio, F. di; Bierwisch, C.
Journal Article
2015Simulation und experimentelle Validierung von Temperaturen, Härtegut und Eigenspannungen bei der induktiven Wärmebehandlung
Schweizer, F.; Asperheim, J.-I.; Stiele, H.-J.
Journal Article
2014Evaluation of actuator, sensor and fatigue performance of piezo-metal-composites
Drossel, Welf-Guntram; Hensel, Sebastian; Nestler, Matthias; Lachmann, Lutz
Journal Article
2014Experimental and numerical study on shaping of aluminum sheets with integrated piezoceramic fibers
Drossel, Welf-Guntram; Hensel, Sebastian; Lachmann, Lutz; Nestler, Matthias; Schubert, Andreas; Müller, Benedikt; Müller, Michael
Journal Article
2014Interactive 3D subdomaining using adaptive FEM based on solutions to the dual problem
Graf, Holger; Larson, Mats; Stork, André
Conference Paper
2014Mathematical modeling and numerical simulation of an actively stabilized beam-column with circular cross-section
Schäffner, Maximilian; Enß, Georg Christoph; Platz, R.
Conference Paper
2014Modeling of the performance reduction of macro fiber composites for use in numerical forming simulation of piezoceramic-metal-compounds
Hensel, Sebastian; Drossel, Welf-Guntram; Nestler, Matthias; Müller, Roland
Journal Article
2014NVH development of car structures by means of numerical simulation of energetic quantities
Ebert, Jonas; Stoewer, Torsten; Schaal, Clarissa; Bös, Joachim; Melz, Tobias
Conference Paper
2014Three-dimensional numerical simulation and experiment of three fields cooperative in refrigerated road transport carriage
Li, Q.; Weng, W.; Fang, Dianjun; Cao, M.; Wu, J.
Journal Article
2013Bending large glass plates with a flexible mould
Rist, Tobias; Gremmelspacher, Matthias; Krauß, Manfred; Kübler, Rainer
Journal Article
2013Modeling and simulation of main engine excitation on board vessels
Tamm, Christoph; Kurch, Matthias
Conference Paper
2013Modelling and simulation of fluid-porous structure interaction on the filter element scale
Kirsch, Ralf; Iliev, Dimitar; Iliev, Oleg; Mikelić, Andro; Dedering, Michael
Conference Paper
2013Painting by numbers
Ye, Qiaoyan; Tiedje, Oliver
Journal Article
2012Computation of a compact state space model for an adaptive spindle head configuration with piezo actuators using balanced truncation
Uddin, Mohammad Monir; Saak, Jens; Kranz, Burkhard; Benner, Peter
Journal Article
2012Theoretical and experimental aspects of paint film leveling
Hager, Christian; Schneider, Matthias; Strohbeck, Ulrich
Presentation
2012Towards a memristor model library in modelica
Majetta, Kristin; Clauß, Christoph; Schmidt, Torsten
Conference Paper
2011Approximation of mean stress relaxation by numerical simulation using the Jiang model and extrapolation of results
Landersheim, Volker; Bruder, Thomas; Hanselka, Holger
Journal Article, Conference Paper
2011Investigations of spray painting processes using an airless spray gun
Ye, Qiaoyan; Shen, Bo; Tiedje, Oliver; Domnick, Joachim
Conference Paper
2011Mechanical joining with self piercing solid-rivets at elevated tool velocities
Neugebauer, Reimund; Jesche, F.; Kraus, C.; Hensel, S.
Conference Paper
2011Simulation and Visualization of Medical Application to the Inner Ear of the Guinea Pig to Reduce Animal Experiments
Hering-Bertram, M.; Siedow, N.; Tse, O.; Plontke, S.; Gill, R.
Electronic Publication
2010Constraint corrected cleavage fracture assessment based on tests of standard and small scale cruciform specimens
Hohe, J.; Hardenacke, V.; Siegele, D.
Conference Paper
2008An application-driven improvement of the drift-diffusion model for carrier transport in decanano-scaled CMOS devices
Kampen, C.; Burenkov, A.; Lorenz, J.; Ryssel, H.; Aubry-Fortuna, V.; Bournel, A.
Journal Article
2008Application-driven simulation of nanoscaled CMOS transistors and circuits
Burenkov, A.; Kampen, C.; Baer, E.; Lorenz, J.; Ryssel, H.
Journal Article
2008Numerical simulation of painting processes
Scheibe, Andreas; Westkämper, Engelbert; Ye, Qiaoyan
Conference Paper
2007Comment on "viscosity measurement by cylindrical compression for numerical modeling of precision lens molding process"
Richter, F.; Hoffmann, H.-J.
Journal Article
2007Modelling and simulation of drying processes - a new approach in virtual painting
Scheibe, Andreas; Westkämper, Engelbert; Ye, Qiaoyan
Conference Paper
2007Nonlinear ultrasonic transmission through thin bonded interface: Theoretical background and numerical simulations
Hirsekorn, S.; Hirsekorn, M.; Delsanto, P.P.
Book Article
2007Numerical simulation of electrostatic spray-painting using multiple high-speed rotary bell atomizers
Ye, Qiaoyan; Pulli, Karlheinz; Steinhilber, Timo; Scheibe, Andreas
Conference Paper
2007Packaging design and testing for high temperature applications > 150 °C
Schreier-Alt, T.; Rebholz, C.; Ansorge, F.
Conference Paper
2007Schichtentwicklung sowie experimentelle und numerische Untersuchungen an Schicht-Substrat-Systemen
Leopold, J.; Wank, A.; Rupprecht, C.; Schmidt, G.; Stark, S.; Hoyer, K.
Conference Paper
2007Simulation of nanoidentation and penetration tests for coating-substrate-characterisation
Leopold, J.; Schmidt, G.; Stark, S.; Wielage, B.; Wank, A.; Rupprecht, C.; Hoyer, K.
Conference Paper
2007Werkzeuge für die Hochgeschwindigkeitsbearbeitung
Leopold, J.; Schmidt, G.
Conference Paper
2006A comprehensive and holistic approach of multi-scale modelling and simulation of manufacturing systems
Scheibe, A.; Constantinescu, C.; Decker, M.; Westkämper, E.
Conference Paper
2006Determination of sheet material properties using biaxial bulge tests
Altan, T.; Palaniswamy, H.; Bortot, P.; Mirtsch, M.; Heidl, W.; Bechtold, A.
Conference Paper
2006The simulation of the electrostatic spray painting process with high-speed rotary bell atomizers. Pt.II: External charging
Domnick, Joachim; Scheibe, Andreas; Ye, Qiaoyan
Journal Article
2005An improved characterisation of long-fibre thermoplastics for numerical simulation of components
Eckardt, J.; Borth, O.; Busch, M.; Krombholz, A.; Lühe, P.
Conference Paper
2005The simulation of the electrostatic spray painting process with high-speed rotary bell atomizers. Pt.I: Direct charging
Domnick, J.; Scheibe, A.; Ye, Q.
Journal Article
2004Carbon-nanotube-sheet actuator - theoretical and experimental investigations
Haque, M.H.; Kolaric, I.; Vohrer, U.; Wallmersperger, T.; Kröplin, B.
Conference Paper
2004Damage and strength analysis of bolted joints in CFRP
Kyrkach, O.; Schäuble, R.
Conference Paper
2004Grundlagen der Modellierung elektrostatisch unterstützter Beschichtungsprozesse
Ye, Q.
Conference Paper
2004A unified treatment of nonclassical nonlinear effects in the propagation of ultrasound in heterogeneous media
Delsanto, P.; Hirsekorn, S.
Journal Article, Conference Paper
2003Fatigue life assessment
Sonsino, C.M.; Bruder, T.
Conference Paper
2003Nonlinear effects in the propagation of ultrasonic waves through thin interfaces
Delsanto, P.; Camagna, C.; Hirsekorn, M.; Hirsekorn, S.
Conference Paper
2002Experimental verification of the numerical model for a CaF2 crystal growth process
Molchanov, A.; Hilburger, U.; Friedrich, J.; Finkbeiner, M.; Wehrhan, G.; Müller, G.
Journal Article
2002Modeling the propagation of ultrasonic waves in the interface region between two bonded elements
Delsanto, P.; Hirsekorn, S.; Aostini, V.; Loparco, R.; Koka, A.
Journal Article
2002Numerical simulation of die compaction and sintering
Kraft, T.; Riedel, H.
Journal Article
2001Application and limits of weathering simulation on the maintenance of monuments
Greubel, D.; Herlyn, J.W.; Meinlschmidt, P.
Conference Paper
2001AUTOBENCH. Integrierte Entwicklungsumgebung für virtuelle Automobil-Prototypen
: Thole, C.-A.
Report
2001Biaxial wheel, hub test facility. Proceedings of the 5th International User Meeting
: Fischer, G.
Conference Proceedings
2001Nonlinear optical intensity filters: Experiment and design rules
Weinert, C.M.; Sizmann, A.; Ludwig, R.; Schubert, C.; Feiste, U.; Weber, H.G.
Conference Paper
2001Optimization of Melt Growth Processes by Experimental Analysis and Computer Modeling
Müller, G.; Fischer, B.
Conference Paper
2001Vapour phase doping under microgravity
Pätzold, O.; Fischer, B.; Wunderwald, U.; Buhrig, E.
Conference Paper
20003D numerical simulation of melt flow in the presence of a rotating magnetic field
Vizman, D.; Fischer, B.; Friedrich, J.; Müller, G.
Journal Article
2000A model for prejudiced behaviour and a noisy dynamical system
Schmidt, A.U.
Report
1999Study of oxygen transport in Czochralski Growth of silicon
Müller, G.; Mühe, A.; Backofen, R.; Tomzig, E.; Ammon, W., von
Journal Article
1997Characterization of ductile fracture toughness based on subsized charpy and tensile test results
Schmitt, W.; Talja, H.; Böhme, W.; Oeser, S.; Stöckl, H.
Conference Paper
1997Uni-Axial Strain Loading of a Rubber Rod by Planar Shock Waves
Reichenbach, H.; Heilig, W.; Ben-Dor, G.; Wang, L.; Igra, O.
Journal Article
1996The Influence of Projectile Hardness on Ballistic Limit Velocities
Hohler, V.; Stilp, A.J.; Walker, J.D.; Anderson, C.E.
Conference Paper
1996Long-Rod Penetration into Target That Was Previously Penetrated
Hohler, V.; Stilp, A.J.; Mayseless, M.
Conference Paper
1996Radiation response of P-I-P diodes on diamond substrates of various type
Denisenko, A.V.; Fahrner, W.R.; Henschel, H.; Job, R.; Strähle, U.
Journal Article
1996Simulierte Bauteilbewitterung in einer Doppelklimakammer
Herlyn, J.W.; Mehlhorn, L.
Journal Article
1996Simulierte Bauteilbewitterung in einer Doppelklimakammer
Herlyn, J.W.; Mehlhorn, L.
Journal Article
1995Ein numerisches Modell zum einstufigen Laserstrahlbeschichten
Ollier, B.; Pirch, N.; Kreutz, E.W.
Journal Article
1995Prediction of shape distortions of hard metal parts by numerical simulation of pressing and sintering
Sun, D.-Z.; Riedel, H.
Conference Paper
1995Time-resolved Penetration of Long Rods into Steel Targets
Hohler, V.; Stilp, A.J.; Walker, J.D.; Anderson, C.E.
Journal Article
1994Application of Micromechanical Models to the Analysis of Ductile Fracture under Dynamic Loading
Sun, D.-Z.; Hönig, A.; Böhme, W.; Schmitt, W.
Conference Paper
1994Equilibrium pore surfaces, sintering stresses and constitutive equations for the intermediate and late stages of sintering. Part 1. Computation of equilibrium surfaces
Svoboda, J.; Riedel, H.; Zipse, H.
Journal Article
1994Equilibrium pore surfaces, sintering stresses and constitutive equations for the intermediate and late stages of sintering. Part 2. Diffusional densification and creep
Riedel, H.; Svoboda, J.; Zipse, H.
Journal Article
1994Numerical simulation of die pressing and sintering - development of constitutive equations
Riedel, H.; Meyer, D.; Svoboda, J.; Zipse, H.
Journal Article
1994Numerical simulation of die pressing and sintering-development of constitutive equations
Riedel, H.; Svoboda, J.; Zipse, H.
Conference Paper
1994Die pressing and mechanical behaviour of silicon nitride
Meyer, D.F.; Drüsedau, K.A.; Kerber, A.; Hollstein, T.
Conference Paper
1993The brittle-to-ductile transition in silicon
Brede, M.
Journal Article
1993Ductile Fracture during Tensile Hopkinson Bar and Plate Impact Testing
Worswick, M.J.; Nahme, H.; Clark, J.; Fowler, J.
Conference Paper
1993Numerical simulation of die pressing and sintering-development of constitutive equations
Riedel, H.; Meyer, D.; Svoboda, J.; Zipse, H.
Conference Paper
1993On the Ballistic Resistance of Laminated Steel Targets. Experiments and Numerical Calculations
Weidemaier, P.; Senf, H.; Rothenhäusler, H.; Filbey, G.L.; Gooch, W.A.
Conference Paper
1993Penetration of Long Rods into Steel and Glass Targets: Experiments and Computations
Hohler, V.; Stilp, A.J.; Walker, J.D.; Anderson, C.E.
Conference Paper
1992The effect of explosive detonation wave shaping on EFP shape and performance
Weimann, K.
Conference Paper
1992Simulation of die pressing and sintering of powder metals, hard metals and ceramics
Riedel, H.; Sun, D.-Z.
Conference Paper
1992Three-dimensional coupled mode method for simulation of coupler and filter structures
Weinert, C.M.
Journal Article
1991Accurate measurement of the vacancy equilibrium concentration in silicon
Zimmermann, H.
Journal Article
1991The validation of hydrocodes for orbital debris impact simulation
Lambert, M.; Frey, J.D.; Rios, J.F.; Garaud, X.; Dubois, J.; Schneider, E.
Conference Paper
1990Application of micromechanical models to the analysis of ductile fracture resistance behaviour
Sun, D.-Z.; Schmitt, W.
Conference Paper
1990Creep crack growth experiments and their numerical simulation.
Hollstein, T.; Kienzler, R.
Conference Paper
1990The pseudo-steady shock reflection process as predicted by the von Neumann theory and by the SHARC-code.
Heilig, W.
Book Article
1989Application of local damage models to the numerical analysis of ductile rupture
Sun, D.-Z.; Voss, B.; Schmitt, W.; Siegele, D.
Journal Article
1989Gas phase depletion in horizontal MOCVD reactors.
Neumann, G.; Winkler, K.; Bachem, K.H.
Conference Paper
1989Numerical evaluation of creep experiments
Schmitt, W.; Hollstein, T.; Kienzler, R.
Conference Paper
1988Utilization of heat gains from transparently insulated collector-storage walls
Platzer, W.J.
Conference Paper
1984Failure behaviour of an aluminium plate under impact loading
Bretz, G.; Kinscher, J.; Poth, A.; Scharpf, F.; Meyer, L.W.; Rothenhäusler, H.; Senf, H.
Conference Paper