| | |
|---|
| 2013 | Influence of pressure-assisted polymerization on the microstructure and strength of polymer-infiltrated ceramics
Steier, V.F.; Koplin, C.; Kailer, A. | Journal Article |
| 2013 | Minimalistic devices and sensors for micromagnetic materials characterization
Szielasko, Klaus; Mironenko, Ivan; Altpeter, Iris; Herrmann, Hans-Georg; Boller, Christian | Journal Article |
| 2012 | 3-D radar image processing methodology for Non-Destructive Testing of aeronautics composite materials and structures
Brook, A.; Cristofani, Edison; Vandewal, Marijke; Matheis, Carsten; Jonuscheit, Joachim | Conference Paper |
| 2012 | Application of lock-in thermography for failure analysis in integrated circuits using quantitative phase shift analysis
Schmidt, C.; Altmann, F.; Breitenstein, O. | Journal Article |
| 2012 | EMAT pipe inspection with guided waves
Salzburger, Hans Jürgen; Niese, Frank; Dobmann, Gerd | Journal Article |
| 2012 | In-depth high-resolution SAR imaging using Omega-k applied to FMCW systems
Cristofani, Edison; Vandewal, Marijke; Matheis, Carsten; Jonuscheit, Joachim | Conference Paper |
| 2012 | Micro-magnetic evaluation of micro-residual stresses of the IInd and IIIrd orders
Rabung, Madalina; Altpeter, Iris; Dobmann, Gerd; Szielasko, Klaus | Journal Article |
| 2012 | Non-destructive testing with micro and MM waves - Where we are and where we go
Dobmann, Gerd; Altpeter, Iris; Sklarczyk, Christoph; Pinchuk, Roman | Journal Article |
| 2011 | Microstructure characterization and imaging of fine-grainded steel by microscopic ultrasonic techniques
Hirsekorn, S.; Rabe, U.; Batista, L.; Behl, L. | Conference Paper |
| 2011 | Non-contact multilayer thickness measurements with reflection-mode terahertz time-domain spectroscopy
Feige, V.; Nix, S.; Ellrich, F.; Jonuscheit, J.; Beigang, R. | Conference Paper |
| 2011 | Tomographic reconstruction of defects in composite plates using genetic algorithms with cluster analysis
Kishore, N.N.; Munshi, P.; Ranamale, M.A.; Ramakrishna, V.V.; Arnold, W. | Journal Article |
| 2010 | Non-destructive characterization of polymer composites based on high-tenacity man-made cellulose fibres
Ivanovskih, A.V.; Rabe, U.; Melev, V.; Lugin, S.; Boller, C.; Kröning, M. | Conference Paper, Poster |
| 2010 | Non-destructive evaluation of reinforced concrete structures. Vol.1: Deterioration processes and standard test methods
: Maierhofer, C.; Reinhardt, H.-W.; Dobmann, G. | Book |
| 2010 | Terahertz time domain spectroscopy for nondestructive testing and sensing applications
Ellrich, F.; Herrmann, M.; Jonuscheit, J.; Theuer, M.; Torosyan, G.; Molter, D.; Wiegand, S.; Wohnsiedler, S.; Beigang, R. | Conference Paper |
| 2010 | Towards multiscale simulation of non-destructive tests in virtual and augmented reality
Avgoustinov, N.; Wolter, B.; Dobmann, G.; Boller, C. | Conference Paper |
| 2009 | Ageing management - a new challenge for integration of non-destructive testing
Dobmann, G. | Conference Paper |
| 2009 | International scientific laboratory for laser-optical diagnostics in serve for nondestructive materials testing
Belyi, V.; Kazak, N.; Khilo, N.; Kröning, M.; Schreiber, J. | Journal Article |
| 2008 | Operational challenges: Extension of propeller welding repairs for a higher availability of ships
Junglewitz, A.; Spies, M.; Rieder, H. | Conference Paper |
| 2008 | State of the art of inline non-destructive weld inspection of pipelines by ultrasonics
Dobmann, G.; Barbian, O.A.; Willems, H. | Journal Article |
| 2007 | Application of new front-end electronics for non-destructive testing of railroad wheel sets
Kappes, W.; Rockstroh, B.; Bähr, W.; Kröning, M.; Rodner, C.; Goetz, J.; Nemec, D. | Journal Article |
| 2007 | Non-destructive failure analysis and modeling of encapsulated miniature SMD ceramic chip capacitors under thermal and mechanical loading
Wunderle, B.; Braun, T.; May, D.; Mazloum, A.; Bouazza, M.; Walter, H.; Wittier, O.; Schacht, R.; Becker, K.-F.; Schneider-Ramelow, M.; Michel, B.; Reichl, H. | Conference Paper |
| 2007 | Non-destructive testing of laser welds in tailored blanks using electromagnetic transducers
Berniga, G.; Hohl, J.V.; Salzburger, H.-J.; Arnold, W. | Journal Article |
| 2005 | Calibration and evaluation of nonlinear ultrasonic transmission measurements on thin bonded interfaces
Hirsekorn, S.; Koka, A.; Kurzenhäuser, S.; Arnold, W. | Conference Paper |
| 2005 | Micro-magnetic evaluation of residual stresses of the 2nd and 3rd order
Pirlog, M.; Szielasko, K.; Altpeter, I.; Dobmann, G.; Kröning, M. | Conference Paper |
| 2005 | Nondestructive testing of finger-jointed structural timber: Overview of possible methods, results of preliminary evaluations, and possibilities for industrial implementation
Plinke, B. | Conference Paper |
| 2004 | NDE for material characterization of aging due to thermal embrittlement, fatigue and neutron degradation
Dobmann, G. | Conference Paper |
| 2004 | Numerical time-domain modeling of linear and nonlinear ultrasonic wave propagation using finite integration techniques - theory and applications
Schubert, F. | Journal Article |
| 2004 | The potential and need for NDT innovations
Kröning, M.; Aleshin, N.; Naumo, L.; Meyendorf, N.; Raj, B.; Smorodinski, Y. | Conference Paper |
| 2003 | Project GRETE: Evaluation of non-destructive testing techniques for monitoring of material degradation
Acosta, B.; Delnondedieu, M.; Bros, J.; Brumovsky, M.; Dobmann, G.; Gillemot, F.; Hahn, P.; Kauppinen, P.; Maussner, G.; Niffenegger, M.; Oettel, R.; Perosanz, F.J.; Rogerson, A.; Stegemann, D.; Schaaf, B. van der | Conference Paper |
| 2003 | Ultrasonic analysis of texture and characterization of materials properties and behaviour influenced by texture
Schneider, E.; Herzer, R. | Conference Paper |
| 2002 | Detection of martensite phase and texture in cold worked 304 stainless steel by micro-magnetic and x-ray diffraction technique
Sagar, S.; Ravi Kumar, B.; Kopp, M.; Altpeter, I.; Dobmann, G.; Bhattacharya, D. | Conference Paper |
| 2002 | Encapsulant characterization - valuable tools for process setup and failure analysis
Becker, K.F.; Braun, T.; Koch, M.; Vogel, D.; Aschenbrenner, R.; Reichl, H.; Hagedorn, H.W.; Neumann Rodekirch, J. | Conference Paper |
| 2002 | Innovative NDE for laser welding
Dobmann, G.; Salzburger, H.-J. | Conference Paper |
| 2002 | Non-destructive evaluation of brazed joints by means of acoustic emission
Traxler, H.; Arnold, W.; Knabl, W.; Rödhammer, P. | Conference Paper, Journal Article |
| 2002 | Nondestructive acoustic imaging techniques
Schmitz, V. | Book Article |
| 2002 | Project GRETE: Evaluation of non-destructive testing techniques for monitoring of material degradation
Acosta, B.; Delnondedieu, M.; Bros, J.; Brumovsky, M.; Dobmann, G.; Gillemot, F.; Hahn, P.; Kauppinen, P.; Maussner, G.; Niffenegger, M.; Oettel, R.; Perosanz, F.J.; Rogerson, A.; Stegemann, D.; Schaaf, B. van der | Journal Article |
| 2001 | Creep-damaged pipe steels probed with positron spectroscopy
Somieski, B.; Krause-Rehberg, R. | Journal Article |
| 2001 | The electric emission from mortar and concrete subjected to mechanical impact
Sklarczyk, C.; Altpeter, I. | Journal Article |
| 2001 | Gesicherte Interpretationen der FTIR-Reflexionsspektren SiC-CVD-Schichten durch Spektrensimulation
Grählert, W.; Hopfe, V. | Journal Article |
| 2001 | In-line quality control of laser welds of tailored blanks by couplant free ultrasonic inspection
Salzburger, H.-J.; Mohrbacher, H. | Conference Paper |
| 2001 | Materials characterization and defect detection with millimeter wave radar sensor in near field
Sklarczyk, C.; Schlechtweg, M. | Conference Paper |
| 2001 | Non-destructive characterization of martensite in AISI type 304 stainless steel using squid and MBN methods
Rao, B.; Jayakumar, T.; Raj, B.; Arnold, W. | Journal Article |
| 2001 | Non-destructive testing methods for moisture determination
Maierhofer, C.; Wolter, B. | Conference Paper |
| 2001 | Nonlinear Transfer of Ultrasound by Adhesive Joints - a Theoretical Description
Hirsekorn, S. | Journal Article |
| 2001 | Planning and use of condition - dependent NDT for the interaction between fracture mechanics and quantitative NDT
Schmitz, V.; Kröning, M.; Roos, E.; Blind, D.; Eisele, U. | Journal Article |
| 2001 | Quality control of laser welds of tailored blanks using guided waves and EMATs
Salzburger, H.-J.; Dobmann, G.; Mohrbacher, H. | Journal Article |
| 2001 | Residual stress measurement of components by NDT
Dobmann, G. | Journal Article |
| 2000 | Ageing Material Evaluation and Studies by Non-Destructive Techniques AMES-NDT Concerted Action
Dobmann, G.; Coste, J.; Debarberis, L.; Horsten, M. | Conference Paper |
| 2000 | Computed Laminography and its Applications
Gondrom, S.; Maisl, M.; Reiter, H.; Cloetens, P.; Kröning, M. | Journal Article |
| 2000 | Detection of Cu-Precipitates in Steel by Micro-Magnetic Nondestructive Techniques
Dobmann, G.; Altpeter, I. | Conference Paper |
| 2000 | Experiences with Synthetic Aperture Focusing Technique in the Field
Schmitz, V.; Chakhlov, S.; Müller, W. | Journal Article |
| 2000 | Kunststoffcharakterisierung mit Mikrowellen. Industrietaugliche Systeme für die zerstörungsfreie Prüfung
Sklarczyk, C. | Journal Article |
| 2000 | Micro-Magnetic, Multiple-Parameter, Microstructure and Stress Analysis - 3MA - For Non-Destructive Material Properties Determination and Ageing Prediction
Dobmann, G.; Kern, R. | Conference Paper |
| 2000 | A New Method for Non-Destrucitve Testing: Phase Contrast Radiography and Tomography (Holo-Tomography)
Baumbach, T.; Helfen, L.; Boller, E.; Cloetens, P.; Kröning, M. | Journal Article |
| 2000 | Non-Destructive Characterization of Ferromagnetic Layers and Laser Systems
Meyendorf, N.; Altpeter, I.; Netzelmann, U.; Rösner, H.; Hoffmann, J. | Conference Paper |
| 2000 | Nondestructive Characterization of Corrosion Protective Coatings on Aluminum Alloy Substrates
Hoffmann, J.; Sathish, S.; Khobaib, M.; Meyendorf, N.; Netzelmann, U.; Matikas, T. | Conference Paper |
| 2000 | Polymer Characterisation by Means of Microwaves
Sklarczyk, C. | Journal Article |
| 2000 | Thermographic Testing Methods with High Temporal and Spatial Resolution
Netzelmann, U.; Walle, G.; Karpen, W.; Meyendorf, N. | Conference Paper |
| 2000 | Werkstofftrends: Zerstörungsfreie Werkstoffprüfung
Kohlhoff, J.; Kretschmer, T. | Journal Article |
| 1999 | Ageing Material Evaluation and Studies by Non-Destructive Techniques AMES-NDT Concerted Action
Dobmann, G.; Coste, J.; Debarberis, L.; Horsten, M.G. | Conference Paper |
| 1999 | Die Elastischen Materialkonstanten III. Ordnung und ihr Nutzungspotential in der zerstörungsfreien Werkstoffprüfung
Schneider, E.; Zimmer, M. | Conference Paper |
| 1999 | Non-destructive-diagnostic for material degradation - New approaches to characterise hydrogen attack at X20Cr13 steel and high cycle fatigue at steel 1.4551
Dobmann, G.; Lang, M. | Conference Paper |
| 1999 | Nondestructive analytical tools for characterization of thin titanium silicide films prepared by conventional and direct step silicidation with enhanced transition
Kal, S.; Ryssel, H. | Journal Article |
| 1999 | Progress of the Ageing Material Evaluation and Studies by Non-Destructive Techniques AMES-NDT Concerted Action
Debarberis, L.; Kröning, M.; Dobmann, G. | Conference Paper |
| 1999 | Strain Relaxation in Surface Nano-Structures Studied by X-Ray Diffraction Methods
Baumbach, T.; Lübbert, D.; Gailhanou, M. | Journal Article |
| 1999 | Synthetic Aperture Focussing Technique: State of the Art (EUR)
Schmitz, V.; Müller, W.; Chakhlov, S. | Conference Paper |
| 1998 | Anforderungen der quantitativen ZfP an die Bruchmechanik
Cioclov, D.; Schmitz, V. | Conference Paper |
| 1998 | Barkhausen- und Wirbelstrommikroskopie zur Werkstoffcharakterisierung und Eigenspannungsmessungen im Mikrometerbereich
Altpeter, I.; Bender, J.; Hoffmann, J.; Kopp, M. | Conference Paper |
| 1998 | Die Barkhausen- und Wirbelstrommikroskopie, eine neue Rastersondentechnik zur Werkstoffcharakterisierung im Mikrometerbereich
Altpeter, I.; Bender, J.; Hoffmann, J.; Kopp, M. | Conference Paper |
| 1998 | Characterization of the Microstructure of Laser-Hardened Carbon Steels by Means of Positron Lifetime Measurements and Micromagnetics
Somieski, B.; Meyendorf, N.; Kern, R.; Krause-Rehberg, R. | Conference Paper |
| 1998 | Detection of Residual Stresses and Nodular Growth in Thin Ferromagnetic Layers with Barkhausen and Acoustic Microscopy
Altpeter, I.; Dobmann, G.; Meyendorf, N.; Fassbender, S.; Hoffmann, J.; Nichtl-Pecher, W.; Johnson, J. | Conference Paper |
| 1998 | Fatigue Characterization of AISI 321 Austenitic Steel by Means of HTC-SQUID
Johnson, J.; Lang, M.A.; Bassler, H.-J. | Conference Paper |
| 1998 | High-Resolution Materials Characterization by Conventional and Near-Field Acoustic Microscopy
Hirsekorn, S.; Arnold, W. | Journal Article |
| 1998 | Microstructure and Texture Influences on Ultrasonic Quantities for Welding Stress Analysis
Arenz, U.; Schneider, E. | Conference Paper |
| 1998 | Non-Destructive Testing and Quality Management
Baumbach, H.; Kraus, S.; Cioclov, D.; Schmitz, V. | Journal Article |
| 1998 | Nondestructive testing and evaluation of historical monuments using thermography and electronic speckle pattern interferometry (ESPI)
Meinlschmidt, P.; Bothe, T.; Hinsch, K.D.; Mehlhorn, L. | Conference Paper |
| 1998 | Numerical Modeling of Elastic Wave Propagation in Random Particulate Composites
Schubert, F.; Köhler, B. | Conference Paper |
| 1998 | PC-based Systems for Ultrasonic and Eddy Current NDT
Dobmann, G.; Dalichow, M.H.; Kröning, M.; Schmitz, V.; Müller, W.; Becker, R. | Conference Paper |
| 1998 | Residual Stress Measurements in Front of a Crack Tip with High Spatial Resolution by Using Barkhausen Microscopy
Altpeter, I.; Dobmann, G.; Meyendorf, N.; Blumenauer, H.; Horn, D.; Krempe, M. | Conference Paper |
| 1998 | Zerstörungsfreie Charakterisierung von Schichten
Meyendorf, N. | Journal Article |
| 1998 | Zerstörungsfreie Charakterisierung von Schichten mittels Wirbelstrommikroskopie
Altpeter, I.; Meyendorf, N. | Journal Article |
| 1998 | Zerstörungsfreie Schichtcharakterisierung mit thermographischen Verfahren
Meyendorf, N.; Netzelmann, U.; Vetterlein, T.; Walle, G. | Journal Article |
| 1998 | Zerstörungsfreie und berührungslose Charakterisierung von Schichten mit Hilfe von Mikrowellen
Sklarczyk, C. | Journal Article |
| 1997 | Experimental aspects of the approximate error formula for tomographic reconstruction
Munshi, P.; Maisl, M.; Reiter, H. | Journal Article |
| 1997 | Grünkörpercharakterisierung mit zerstörungsfreien Prüfverfahren
Reiter, H.; Netzelmann, U.; Preußer, T. | Conference Paper |
| 1997 | Integration of NDT into life time management
Becker, R.; Dobmann, G.; Kröning, M.; Reiter, H.; Schneider, E. | Journal Article |
| 1997 | Low Frequency Eddy Current Inspection for Surface and Subsurface Defects of the RPV-Cladding by a New DSP Controlled Eddy Current System
Becker, R.; Kröning, M. | Conference Paper |
| 1997 | NMR for Non-Destructive Testing of Materials
Bloem, P.; Greubel, D.; Dobmann, G.; Lorentz, O.K.; Wolter, B. | Conference Paper |
| 1997 | Nondestructive Characterization of Reactor Pressure Vessel Materials Using Neural Networks
Fiedler, U.; Schurig, C.; Böhmert, J. | Conference Paper |
| 1997 | Zerstörungsfreie Prüfung zur Qualitätssicherung keramischer Bauteile
Reiter, H. | Book Article |
| 1996 | Benefits and Challenges of the Integration of Nondestructive Testing into Material and Process Engineering
Kröning, M. | Conference Paper |
| 1996 | Characterization of green ceramics by microwaves and ultrasound
Kröning, M.; Schneider, R.; Netzelmann, U. | Conference Paper |
| 1996 | Computed laminography for materials testing
Reiter, H.; Zhou, J.; Arnold, W.; Maisl, M. | Journal Article |
| 1996 | Die elektrische Emission beim Versagen von Faserverbundwerkstoffen und ihren Komponenten
Sklarczyk, C.; Winkler, S.; Thielicke, B. | Journal Article |
| 1996 | Integration of NDT into life time management
Becker, R.; Kröning, M.; Schneider, E.; Reiter, H.; Dobmann, G. | Conference Paper |
| 1996 | Measurement of adhesion strength using nonlinear acoustics
Kröning, M.; Fassbender, S.; Arnold, W. | Conference Paper |
| 1996 | Measurement of Wall-Thickness at Extreme Temperatures Using EMATs
Kröning, M.; Salzburger, H.-J.; Smorodinski, Y.; Mironenko, V.; Bernus, L. von | Conference Paper |
| 1996 | A new method of characterizing patterns in x-ray tomographic images of a composite specimen
Munshi, P.; Maisl, M.; Reiter, H. | Journal Article |
| 1996 | Nondestructive Characterization of Materials. A Powerful Tool during Lifetime Management of Industrial Products
Dobmann, G. | Conference Paper |
| 1996 | Nondestructive Determination of the Strength of Adhesive Joints
Arnold, W. | Conference Paper |
| 1996 | Nondestructive Testing of Wood Using a Single Sided Nuclear Magnetic Resonance Device
Wolter, B.; Netzelmann, U.; Dobmann, G. | Conference Paper |
| 1996 | On-Line Eddy Current Inspection of Steel Ingots
Ciora, C.; Csaszar, L.; Chiose, I.; Disque, M. | Conference Paper |
| 1996 | Perspektiven der zerstörungsfreien Materialcharakterisierung
Meyendorf, N. | Conference Paper |
| 1996 | Process Integrated Nondestructive Testing for Evaluation of Hardness
Kröning, M.; Theiner, W.; Kern, R.; Bucher, B.; Meyer, R.; Wolf, H. | Conference Paper |
| 1996 | Qualifizierung der Verfahren für zerstörungsfreie Materialcharakterisierung
Kraus, S.; Meyendorf, N.; Altpeter, I.; Nockemann, C.; Tillack, G.-R. | Conference Paper |
| 1996 | Qualitätsmanagement und zerstörungsfreie Prüfung
Baumbach, H. | Journal Article |
| 1996 | Quantitative NDT by 3D image reconstruction
Schmitz, V.; Kröning, M.; Kangenberg, K. | Conference Paper |
| 1996 | Quantitative zerstörungsfreie Bestimmung der Haftfestigkeit von adhäsiven Verbindungen
Fassbender, S.; Arnold, W. | Conference Paper |
| 1996 | Quantitative zerstörungsfreie Bestimmung der Haftfestigkeit von adhäsiven Verbindungen
Fassbender, S.; Arnold, W. | Conference Paper |
| 1996 | Tool Monitoring. An Example for Process Integrated Nondestructive Testing
Kröning, M.; Waschkies, E. | Conference Paper |
| 1996 | Ultrasonic characterization of burrs in aluminium pressure castings
Schneider, E.; Oesterlein, L.; Bruche, D. | Conference Paper |
| 1996 | Ultrasonic characterization of texture in aluminium rolled products
Schneider, E.; Oesterlein, L. | Conference Paper |
| 1996 | Untersuchungen zur Charakterisierung der Werkstoffermüdung in austenitischen Werkstoffen unter Anwendung von HTSL-SQUID
Lang, M.A.; Bassler, H.-J. | Conference Paper |
| 1996 | Zerstörungsfreie Materialcharakterisierung als Beitrag zur Werkstoff- und Verfahrensentwicklung von Konstruktionskeramik
Netzelmann, U.; Kröning, M. | Conference Paper |
| 1996 | Zerstörungsfreie Materialcharakterisierung, ein Aufgabenfeld mit großen Entwicklungspotentialen
Meyendorf, N. | Conference Paper |
| 1996 | Zerstörungsfreie Prüfung zur Qualitätssicherung keramischer Bauteile
Reiter, H. | Conference Paper |
| 1995 | Anwendung von Mikrowellen zur Materialcharakterisierung und Fehlerrekonstruktion dielektrischer Werkstoffe
Walle, G.; Becker, R.; Schneider, R.; Mayer, K. | Conference Paper |
| 1995 | Berührungsfreie Charakterisierung von Lack- und Klebeschichten mit Mikrothermographie
Netzelmann, U.; Meyendorf, N. | Conference Paper |
| 1995 | Computerlaminografie unter Verwendung eines Transmissionsstargets
Reiter, H.; Zhou, J.; Maisl, M. | Conference Paper |
| 1995 | Early fatique damage from the NDE point of view
Dobmann, G. | Conference Paper |
| 1995 | Entwicklung eines schnellen Rekonstruktionsverfahrens für die 3D-Röntgen-Computertomografie
Maisl, M.; Reiter, H.; Buck, J. | Conference Paper |
| 1995 | Erzeugung und Nachweis von Ultraschall mit optischen Methoden
Paul, M. | Conference Paper |
| 1995 | Inspection procedure assessment using modelling capabilities
Kappes, W.; Kröning, M.; Langenberg, K.-J.; Schmitz, V. | Journal Article |
| 1995 | Ein neuer Verfahrensansatz zur Früherkennung wasserstoffinduzierter Spannungsrißkorrosion
Lang, M.A.; Altpeter, I.; Dobmann, G. | Journal Article |
| 1995 | Nondestructive evaluation of TiN films with interface defects by surface acoustic waves
Ollendorf, H.; Schneider, D.; Schwarz, T.; Mucha, A. | Journal Article |
| 1995 | Potential der 3D-Röntgen-Computertomografie zur Visualisierung volumetrischer Fehler in Werkstoffen und Bauteilen
Buck, J. | Conference Paper |
| 1995 | Potential der ComScan-Technik zur Charakterisierung von Beton
Reiter, H.; Arm, P. | Conference Paper |
| 1995 | Prepration and pyroelectrical investigation of bimorph polymer layers
Bauer-Gogonea, S.; Bauer, S.; Wirges, W.; Gerhard-Multhaupt, R. | Journal Article |
| 1995 | Prüfung von Ortbetonauskleidungen mit Ultraschallverfahren
Dobmann, G.; Köhler, B.; Kretzschmar, F.; Anheuser, L. | Conference Paper |
| 1995 | Qualitätsprüfung und Qualitätssicherung an geschweißten Bauteilen
Dobmann, G. | Journal Article |
| 1995 | Ultraschallabbildungsverfahren in der Materialprüfung
Netzelmann, U. | Conference Paper |
| 1995 | Zerstörungsfreie Festigkeitsuntersuchungen an Spanplatten mit Ultraschallmeßtechniken
Greubel, D.; Plinke, B. | Journal Article |
| 1994 | Application of optothermal hybrid microscopy in nondestructive and noncontacting testing of coatings
Vetterlein, T.; Bendjus, B. | Conference Paper |
| 1994 | Bearbeitung und Charakterisierung von Bauteilen aus Hochleistungskeramik
Reiter, H.; Netzelmann, U.; Wagemann, A.; Verlemann, E.; Hollstein, T.; Pfeiffer, W. | Conference Paper |
| 1994 | Charakterisierung von bearbeiteten Keramikoberflächen mittels akustischer Rastermikroskopie.
Pangraz, S.; Arnold, W.; Weides, G. | Conference Paper |
| 1994 | Materials characterization and nondestructive testing by acoustic imaging techniques
Hirsekorn, S.; Weides, G.; Pangraz, S.; Arnold, W.; Bernauer, W. | Journal Article |
| 1994 | Materials Characterization with the Acoustic Microscopy
Hirsekorn, S.; Pangraz, S. | Journal Article |
| 1994 | Microscopic techniques for nondestructive characterization of material structures and measurement of local residual stresses with high resolution
Altpeter, I.; Meyendorf, N. | Conference Paper |
| 1994 | Potentiale der Kernspinresonanztechnik zur Feuchtemessung
Dobmann, G. | Book Article |
| 1994 | Quantitative Bestimmung der Haftfestigkeit mittels nichtlinearer Akustik gezeigt am Beispiel von PVB-geklebtem Verbundglas.
Pangraz, S.; Arnold, W. | Conference Paper |
| 1994 | Quantitative determination of nonlinear binding forces by ultrasonic technique
Pangraz, S.; Arnold, W. | Conference Paper |
| 1994 | Röntgenographische Verfahren als Hilfsmittel zur Beurteilung archäologischer Funde sowie zur Aufklärung ihrer Herstellungstechniken
Reiter, H.; Moesta, H.; Reinhard, W. | Conference Paper |
| 1993 | Bildgebung und Bildverarbeitung zur Erhöhung der Aussagefähigkeit zerstörungsfreier Prüverfahren
Meyendorf, N.; Schirra, M. | Conference Paper |
| 1993 | Fiber optic time-of-flight interferometer for non-contact determination of grain sizes in thin metal sheets using laser ultrasonics
Paul, M.; Rabe, U. | Conference Paper |
| 1993 | Indication of creep embrittlement in low carbon steel components using NDT-methods
Jansky, J.; Dobmann, G. | Conference Paper |
| 1993 | Inspection procedure assessment using modelling capabilities
Kappes, W.; Kröning, M.; Langenberg, K.-J.; Schmitz, V. | Conference Paper |
| 1993 | NDE of austenitic cladding by using low frequency eddy current and EMA-excited SH-Waves
Salzburger, H.J.; Becker, R.; Hübschen, G.; Kröning, M. | Conference Paper |
| 1993 | Qualitätssicherung durch zerstörungsfreie Ermittlung des Werkstoffzustandes
Kröning, M.; Meyendorf, N. | Conference Paper |
| 1993 | Quantitative nondestructive evaluation of machined surface states by X-ray and micromagnetic techniques
Theiner, W.; Schorr, P.; Stücker, E. | Conference Paper |
| 1993 | Results and experiences of ISI austenitic and dissimilar welds using SH-waves and EMUS-probes
Salzburger, H.J.; Bernus, L. von; Oellrich, K.; Hübschen, G.; Kröning, M. | Conference Paper |
| 1993 | Tasks of Non-Destructive Testing
Dobmann, G.; Kröning, M. | Conference Paper |
| 1993 | Zerstörungsfreie Früherkennung von Kriechschäden
Willems, H.; Dobmann, G.; Koble, T. | Conference Paper |
| 1993 | Zertifizierte Prüfkompetenz - Applikation von F und E-Ergebnissen im europäischen Binnenmarkt
Kraus, S.; Kröning, M.; Weiß, R. | Conference Paper |
| 1993 | Zirkular-Arrays zur US-Rohrinnenprüfung
Gebhardt, W.; Köhler, B.; Liebig, V.; Mummert, K. | Conference Paper |
| 1992 | Characterization of surfaces and surface-near zones of solid materials by acoustical imaging techniques
Arnold, W.; Netzelmann, U.; Pangraz, S. | Book Article |
| 1992 | Entwicklung der ZfP zur Wirtschaftlichkeit - Qualitätsbeherrschung statt Qualitätskontrolle
Dobmann, G.; Kraus, S.; Kröning, M. | Conference Paper |
| 1992 | First attempts towards the early detection of fatigued substructures using cyclic-loaded 20 MnMoNi 5 5 steel
Seibold, A.; Dobmann, G. | Journal Article |
| 1992 | High resolution material and component inspection by x-ray techniques
Reiter, H. | Conference Paper |
| 1992 | High-resolution photothermal imaging of materials and components
Windschuh, E.; Winterberg, K.-H.; Kröning, M. | Conference Paper |
| 1992 | Mastering quality by integration of nondestructive testing tools into quality assurance
Dobmann, G.; Kröning, M.; Theiner, W.; Willems, H. | Conference Paper |
| 1992 | New EC- and UT-systems for the in-service-inspection of austenitic and dissimilar weldmentsat elevated temperatures
Salzburger, H.J.; Becker, R.; Hübschen, G. | Conference Paper |
| 1992 | Synthetic aperture focussing technique - State of the art
Müller, W.; Schäfer, G.; Schmitz, V. | Conference Paper |
| 1992 | Ultrasonic NDT signal processing
Schmitz, V. | Conference Paper |
| 1991 | Acoustic imaging in materials evaluation
Arnold, W. | Journal Article |
| 1991 | Anrissermittlung mit dem Gleichstrom-Potentialsonden-Verfahren
Müller, F. | Book |
| 1991 | Detection and sizing in turbine rotors with acoustic imaging methods
Müller, W.; Schäfer, G.; Schmitz, V. | Conference Paper |
| 1991 | Fehlerklassierung mit einem stationären Prüfverfahren
Huo, D.; Weinfurter, G.; Langenberg, K.-J.; Schmitz, V. | Conference Paper |
| 1991 | Internationale Modellierungsaktivitäten im Rahmen des PISC-Programmes
Schmitz, V. | Conference Paper |
| 1991 | Messung der Vorspannung mit mikromagnetischen Methoden
Dobmann, G. | Conference Paper |
| 1991 | Mikro-Computer-Tomographie zur Prüfung neuer Werkstoffe
Maisl, M.; Reiter, H. | Conference Paper |
| 1991 | Neue magnetische Gerätemechanik bei der Betondeckungsmessung
Dobmann, G.; Neumann, R. | Conference Paper |
| 1991 | Prozeßdatenerfassung und -auswertung in der Holzwerkstoffindustrie
Landmesser, W.; Mehlhorn, L. | Book |
| 1991 | Qualifiziertes Prüfen - eine methodische Betrachtung der Intelligenz des Prüfens
Baumbach, H.; Kröning, M.; Perner, P. | Conference Paper |
| 1991 | Qualitätskontrolle von Bauteilen aus Hochleistungskeramik mit zerstörungsfreien Prüfverfahren
Reiter, H. | Conference Paper |
| 1991 | Realisierung und Grenzen hochauflösender CT-Systeme
Maisl, M.; Reiter, H. | Conference Paper |
| 1991 | Röntgen-Computer-Tomographie in der Werkstoffprüfung
Maisl, M. | Conference Paper |
| 1991 | Testing particle boards
Greubel, D. | Journal Article |
| 1990 | High resolution X-ray and ultrasonic methods for the non-destructive evaluation of modern ceramics
Arnold, W.; Maisl, M.; Pangraz, S.; Reiter, H. | Conference Paper |
| 1990 | Insitu-measurement of prestressing cable-forces
Dobmann, G. | Conference Paper |
| 1990 | Lifetime prediction in high temperature component.
Bressers, J.; Danzer, R.; Gerold, V.; Guttmann, V.; Henderson, J.; Schneider, K.; Hollstein, T. | Conference Paper |
| 1990 | Modelling of electromagnetic testing techniques
Betzold, K.; Dobmann, G. | Conference Paper |
| 1990 | The models validation work in PISC III
Coffey, J.; Lakestani, F.; Schmitz, V. | Conference Paper |
| 1990 | NDT assessment of a residual life of fatigued damage alloy 800H
Bressers, J.; Hessler, W.; Hildebrandt, U.W.; Willems, H. | Conference Paper |
| 1990 | Non-destructive determination of material properties and stresses
Dobmann, G.; Höller, P. | Conference Paper |
| 1990 | Observation of IC operation using nematic liquid crystals and the laser scanning microscope
Fritz, J.; Lackmann, R. | Conference Paper |
| 1989 | Comparative micromagnetic and Mössbauer spectroscopic depth profile analysis of laserhardened steel X210Cr12
Schaaf, P.; Gonser, U.; Kern, R.; Theiner, W.A. | Conference Paper |
| 1989 | A new miniaturized ultrasonic circular array for endoscopic application in NDT and medicine
Becker, P.-J.; Biebinger, M.; Schmitt, R.M.; Schwarz, H.-P.; Welsch, H.-J. | Conference Paper |
| 1988 | Characterization of hardening depth by Barkhausen noise measurement
Bach, G.; Goebbels, K.; Theiner, W.A. | Journal Article |
| 1988 | Nondestructive residual stress- and hardness-evaluation at weldments by means of 3MA. Micromagnetic- multiparameter-, microstructure- and stress-analysis
Dobmann, G.; Reimringer, B.; Theiner, W. | Conference Paper |
| 1987 | Electromagnetic ultrasonic transducers and systems for in-service inspection of gas pipelines
Salzburger, H.J.; Höller, P.; Willbrand, A. | Journal Article |