Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2018Actors, decision-making, and institutions in quantitative system modelling
Cian, Enrica de; Dasgupta, Shouro; Hof, Andries F.; Sluisveld, Mariësse A.E. van; Köhler, Jonathan; Pfluger, Benjamin; Vuuren, Detlef P. van
Journal Article
2018Large-area layer counting of 2D materials via visible reflection spectroscopy
Hutzler, Andreas; Matthus, C.D.; Dolle, C.; Rommel, M.; Jank, M.P.M.; Spiecker, E.; Frey, L.
Poster
2018A methodology for bottom-up modelling of energy transitions in the industry sector: The FORECAST model
Fleiter, Tobias; Rehfeldt, Matthias; Herbst, Andrea; Elsland, Rainer; Klingler, Anna-Lena; Manz, Pia; Eidelloth, Stefan
Journal Article
20173D model of intra-yarn fiber volume fraction gradients of woven fabrics
Mühlstädt, Mike; Seifert, Wolfgang; Arras, Matthias M.L.; Maenz, Stefan; Jandt, Klaus D.; Bossert, Jörg
Journal Article
2017Characterisation of load-bearing capacity and failure behaviour of different mechanical joints under crash load of steel intensive structures
Giese, P.; Meschut, G.; Sommer, S.; Rochel, P.
Conference Paper
2017Characterization and modelling of soft zones around spot welds in high strength steels
Schuster, L.
Conference Paper
2017How many fast charging stations do we need along the German highway network?
Reuter-Oppermann, Melanie; Funke, Simon Á.; Jochem, Patrick; Graf, Felix
Presentation
2017Improvement of a multi-stage model for the modeling of a functionalized nursing bed as support for the sensor-assisted function-alization of furniture in the hospital and care sector
Kitzig, Andreas; Schröter, Stefan; Naroska, Edwin; Stockmanns, Gudrun; Viga, Reinhard; Grabmaier, Anton
Journal Article
2017Large scale investigation of harmonic summation in wind- and PV-power plants
Ackermann, Florian; Moghadam, Hasanali; Rogalla, Sönke; Santjer, Fritz; Athamna, Issam; Klosse, Rainer; Malekian, Kaveh; Adloff, Stephan; Meyer, Marc Florian; Kaatz, Gesa; Schulz, Detlef; Bitz, Alexander; Schaefer, Nils; Fricke, Bjoern; Ghouti, Mohamad El
Conference Paper
2017MoveHN-A database to support the development of motion based biosignal processing systems
Kitzig, Andreas; Schröter, Stefan; Naroska, Edwin; Stockmanns, Gudrun; Viga, Reinhard; Grabmaier, Anton
Conference Paper
2017Neighboring system as black start source and restoration process based on the VSC-HVDC as tie line
Akbulut, A.; Becker, H.; Mende, D.; Stock, D.S.; Hofmann, L.
Conference Paper
2017Quantification of micro-pullwinding process as basis of data mining algorithms for predictive process model
Wasiak, Christian; Nettleton, David; Janssen, Henning; Brecher, Christian
Conference Paper
2017Training the next generation of PV reliability experts - new Marie-Sklodowska Curie (MSCA) project SOLAR-TRAIN
Weiß, Karl-Anders; Saile, Sandrin; Keiner, A.; Bauermann, Pitta; Oreski, G.; Gottschalg, R.; Moser, D.; Topic, M.; Lagunas, A.R.; Chiantore, P.; Iseghem, M. van
Conference Paper
2017Validation of analytic modelling of local rear contacts in PERC/PERL solar cells
Saint-Cast, P.; Wöhrle, N.; Greulich, J.M.
Conference Paper
2016Achievable revenues for electric vehicles according to current and future energy market conditions
Illing, Bjoern; Warweg, Oliver
Conference Paper
2016Alternative Inline Analysis of Acidic Etching Baths
Mohr, L.; Dannenberg, T.; Zimmer, M.; Rentsch, J.
Conference Paper
2016Analysis of dynamic interactions between different drivetrain components with a detailed wind turbine model
Bartschat, A.; Morisse, M.; Mertens, A.; Wenske, J.
Conference Paper, Journal Article
2016Challenges and future trends in fiber lasers
Taccheo, Stefano; Schüster, Kay; Ferrari, M.; Seddon, Angela B.; Marciniak, Marian; Taudt, Christopher; Trolès, Johann; Valentini, Gianluca; Dorosz, Dominik; Prudenzano, Francesco; Jaeger, Monika; Dandrea, C.; Ivanda, Mile; Chiasera, Alessandro P.; Sujecki, Slawomir; Nazabal, Virginie; Comelli, Daniela; Baghdasaryan, Hovik V.; Baselt, Tobias; Hartmann, Peter; Lucianetti, Antonio; Peterka, Pavel; Klotzbach, Annett; Adam, Jean Luc; Gebavi, Hrvoje
Conference Paper
2016Converter lifetime assessment for doubly-fed induction generators considering derating control strategies at low rotor frequencies
Morisse, M.; Bartschat, A.; Wenske, J.; Mertens, A.
Conference Paper
2016Creep-fatigue lifetime modelling of bellows made of AISI 316 using advanced models
Friedmann, V.; Maier, G.; Schweizer, C.; Quintus, C.
Conference Paper
2016On determination of focal laws for linear phased array probes as to the active and passive element size
Gommlich, Andreas; Schubert, Frank
Conference Paper
2016Online simulation of fluids in early design
Krotil, Stefan; Reinhart, Gunther
Conference Paper, Journal Article
2016Optical Modeling of Honeycomb Textures for Multicrystalline Silicon Solar Cells
Peters, I.; Hauser, H.; Tucher, N.; Bläsi, B.
Journal Article
2016Ein Referenzmodell für Server Based Computing Infrastrukturen und dessen Anwendung für das Kapazitätsmanagement
Knermann, Christian
: Müller-Clostermann, Bruno (Gutachter); Echtle, Klaus (Gutachter)
Dissertation
2016A transition pathway for Germany's industry: Which role for energy efficiency?
Fleiter, Tobias; Rehfeldt, Matthias; Pfluger, Benjamin
Conference Paper
2015Analytical modelling methods for temperature fields in metal cutting based on panel method of fluid mechancis
Klocke, Fritz; Brockmann, Matthias; Gierlings, Sascha; Veselovac, Drazen; Roidl, Benedikt; Schmidt, Gerhard; Semmler, Ulrich; Kever, D.
Journal Article, Conference Paper
2015Charakterisierung und Modellierung freistehender Silizium Membranen auf SOI-Basis für Drucksensor-Anwendungen
Goehlich, Andreas; Jupe, Andreas; Stühlmeyer, Martin; Celik, Yusuf; Schmidt, Alexander; Vogt, Holger
Conference Paper
2015Comparison of modelled heat transfer and fluid dynamics of a flat plate solar air heating collector towards experimental data
Reichl, C.; Kramer, K.; Thoma, C.; Benovsky, P.; Lemée, T.
Journal Article
2015Modelling and verification of mechanical stress induced by soldering of wires for multi busbar interconnection
Rendler, L.C.; Walter, J.; Geipel, T.; Volk, M.; Ebert, C.; Eitner, U.
Conference Paper
2015Multi-scale material modelling of glass-ceramics
Greiner, Anna; Neumeister, Peter
Presentation
2015Realistic yield expectations for bifacial PV systems - an assessment of announced, predicted and observed benefits
Reise, C.; Schmid, A.
Conference Paper
2015Statement on the suitability of the BEEHAVE model for its potential use in a regulatory context and for the risk assessment of multiple stressors in honeybees at the landscape level
Aagaard, Alf; Brock, Theo; Capri, Ettore; Duquesne, Sabine; Filipic, Metka; Hernandez-Jerez, Antonio F.; Hirsch-Ernst, Karen I.; Hougaard Bennekou, Susanne; Klein, Michael; Kuhl, Thomas; Laskowski, Ryszard; Liess, Matthias; Mantovani, Alberto; Ockleford, Colin; Ossendorp, Bernadette; Pickford, Daniel; Smith, Robert; Sousa, Paulo; Sundh, Ingvar; Tiktak, Aaldrik; Linden, Ton van der
Journal Article
2015Succinic acid removal and recovery from aqueous solution using hydrotalcite granules: Experiments and modeling
Schöwe, Nick; Bretz, Karlheinz; Hennig, Torsten; Schlüter, Stefan; Deerberg, Görge
Journal Article
2014Deformation behaviour of TWIP-Steels: From experiments to constitutive modelling and simulations
Butz, A.; Zapara, M.; Erhart, A.; Croizet, D.; Stenberg, N.; Hagstrom, J; Helm, D.; Schneider, M; Kampczyk, M.; Haufe, A.; Biasutti, M.
Conference Paper
2014Exploring and modeling the impact of supply chain-related decisions in production and logistics on energy efficiency
Pastowski, Andreas; Ellerkmann, Frank; Hesse, Kathrin; Schostok, Dorothea; Cirullies, Jan; Fuss, Emanuel
Conference Paper
2014The impact of angular dependent loss measurement on PV module energy yield prediction
Ebert, M.; Stascheit, H.; Hädrich, I.; Eitner, U.
Conference Paper
2014Industry - more than just processes: A combined stock-model approach to quantify the energy saving potential for space heating in European industry
Biere, David; Fleiter, Tobias; Hirzel, Simon; Sontag, Benjamin
Conference Paper
2014Investigation of anti-reflection-coating stacks for silicon heterojunction solar cells
Meiners, B.-M.; Holinski, S.; Schäfer, P.; Hohage, S.; Borchert, D.
Conference Paper
2014ITS-NANO - prioritising nanosafety research to develop a stakeholder driven intelligent testing strategy
Stone, Vicki; Pozzi-Mucelli, Stefano; Tran, Lang; Aschberger, Karin; Sabella, Stefania; Vogel, Ulla; Poland, Craig; Balharry, Dominique; Fernandes, Teresa; Gottardo, Stefania; Hankin, Steven; Hartl, Mark GJ; Hartmann, Nanna; Hristozov, Danial; Hund-Rinke, Kerstin; Johnston, Helinor; Marcomini, Antonio; Panzer, Oliver; Roncato, Davide; Saber, Anne T.; Wallin, Håkan; Scott-Fordsmand, Janeck
Journal Article
2014Kombination quellenorientierter und nachgeschalteter Maßnahmen zur Emissionsminderung von Mikroschadstoffen aus dem urbanen Bereich
Hillenbrand, Thomas; Tettenborn, Felix; Menger-Krug, Eve; Fuchs, Stephan; Toshovski, Snezhina; Metzger, Steffen; Tjoeng, Imee; Wermter, Paul; Kersting, Michael; Abegglen, Christian
Journal Article
2014Modeling of laser patterning of thin-film solar cells
Peschel, Thomas; Matthäus, Gabor; Nolte, Stefan; Eberhardt, Ramona; Tünnermann, Andreas
Conference Paper
2014Modelling recycling and material efficiency trends in the European steel industry
Herbst, Andrea; Fleiter, Tobias; Jochem, Eberhard
Conference Paper
2014Nichtinvasive Identifikation von Regelstreckenparametern einer Werkzeugmaschine
Hellmich, Arvid; Hofmann, Stefan; Hipp, Kevin; Schlegel, Holger; Drossel, Welf-Guntram
Conference Paper
2014Optimization of multi-layer metallization design for large-area back-contact back-junction solar cells
Hendrichs, M.; Keding, R.; Spribille, A.; Fellmeth, T.; Nold, S.; Clement, F.; Wolf, A.; Biro, D.; Preu, R.
Conference Paper
2014Supply Chain Engineering. 2014 Survey on SCM Software Intermediate Results on Market Requirements
Witthaut, Markus
Presentation
2013D3.1 PV and EV optimization in spaces of public use
Misa, S.; Ringelstein, J.; Garcia, J.J.; Enrich, R.
Report
2013Describing models on the web using OGC standards
Watson, Kym; Schaaf, Hylke van der
Conference Paper
2013Discrete element study on the influence of initial coordination numbers on sintering behaviour
Rasp, T.; Kraft, T.; Riedel, H.
Journal Article
2013High-level design process for NATO high assurance ABAC guard
Wrona, Konrad; Oudkerk, Sander; Hein, Christian; Menz, Nadja; Ritter, Tom
Conference Paper
2013Modelling and simulation of fluid-porous structure interaction on the filter element scale
Kirsch, Ralf; Iliev, Dimitar; Iliev, Oleg; Mikelić, Andro; Dedering, Michael
Conference Paper
2013Modelling combined load shifting of thermal supply systems in settlements
Winkel, Michael; Kanngießer, Annedore
Poster
2013Monitoring of photovoltaic systems: Good practices and systematic analysis
Woyte, A.; Richter, M.; Moser, D.; Mau, S.; Reich, N.; Jahn, U.
Conference Paper
2012Active frequency-tripler MMICs for 300 GHz signal generation
Lewark, U.J.; Tessmann, A.; Massler, H.; Wagner, S.; Leuther, A.; Kallfass, I.
Journal Article
2012Bridging macroeconomic and bottom up energy models - the case of efficiency in industry
Herbst, Andrea; Reitze, Felix; Toro, Felipe; Jochem, Eberhard
Conference Paper
2012Method for energy and resource balancing demonstrated as an example of the hot sheet metal production process
Göschel, A.; Schieck, F.; Schönherr, J.
Journal Article, Conference Paper
2012Model-based position control of shape memory alloy actuators
Neugebauer, Reimund; Pagel, Kenny; Bucht, Andre; Drossel, Welf-Guntram
Journal Article
2012Modeling of quality aspects: Real-time
Hilbrich, Robert; Kampenhout, J. Reinier van; Daun, Marian; Weyer, Thorsten; Sojer, Dominik
Book Article
2011Characterization of tool wear in high-speed milling of hardened powder metallurgical steels
Klocke, Fritz; Arntz, Kristian; Cabral, Gustavo Francisco; Stolorz, Martin; Busch, Marc
Journal Article
2011Design and model studies for solid-state power amplification at 210 GHz
Diebold, S.; Kallfass, I.; Massler, H.; Seelmann-Eggebert, M.; Leuther, A.; Tessmann, A.; Pahl, P.; Koch, S.; Ambacher, O.
Journal Article
2011The role and impact of biomass heating support policies
Kranzl, Lukas; Müller, Andreas; Hummel, Marcus; Bürger, Veit; Beurskens, Luuk; Connor, Peter M.; Giakoumi, Argyro; Minas, Iatridis; Ericsson, Karin; Steinbach, Jan
Conference Paper
2010Calculation of emissions into rivers in Germany using the MONERIS model
Fuchs, S.; Scherer, U.; Wander, R.; Behrendt, H.; Venohr, M.; Opitz, D.; Hillenbrand, T.; Marscheider-Weidemann, F.; Götz, T.
Report
2010Investigation of dominant loss mechanisms in low-temperature polymer electrolyte membrane fuel cells
Gerteisen, D.
Dissertation
2010Multiscale homogenization models for the elastic behaviour of metal/ceramic composites with lamellar domains
Ziegler, T.; Neubrand, A.; Piat, R.
Journal Article
2010A new DC-temperature model for a diode bolometer based on SOI-pin-diode test structures
Kropelnicki, P.; Vogt, H.
Conference Paper
2010Thermal effects of the chip removal process and ways of mastering them
Neugebauer, Reimund; Ihlenfeldt, S.; Nestmann, S.; Schmidt, G.; Blau, P.; Richter, C.
Conference Paper
2010Towards hybrid modelling environments - merging desktop-CAD and virtual reality-technologies
Stark, R.; Israel, J.H.; Wöhler, T.
Journal Article
2009Elastic constants of metal/ceramic composites with lamellar microstructures: Finite element modelling and ultrasonic experiments
Ziegler, T.; Neubrand, A.; Roy, S.; Wanner, A.; Piat, R.
Journal Article
2009The EU programme for modelling radiation effects in fusion reactor materials
Dudarev, S.L.; Boutard, J.-L.; Lässer, R.; Caturla, M.J.; Derlet, P.M.; Fivel, M.; Fu, C.-C.; Lavrentiev, M.Y.; Malerba, L.; Mrovec, M.; Nguyen-Manh, D.; Nordlund, K.; Perlado, M.; Schäublin, R.; Swygenhoven, H. van; Terentyev, D.; Wallenius, J.; Weygand, D.; Willaime, F.
Journal Article, Conference Paper
2009Investigation of the fatigue behavior of open cell foams by a micromechanical 3-D model
Demiray, S.; Becker, W.; Hohe, J.
Journal Article
2009Investigations on the adjustment of the modelling section in 2D simulations of milling processes
Uhlmann, E.; Mattes, A.; Graf von der Schulenburg, M.; Gerstenberger, R.
Journal Article
2009Model of a solar driven steam jet ejector chiller and investigation of its dynamic operational behaviour
Pollerberg, C.; Heinzel, A.; Weidner, E.
Journal Article
2009Phase equilibria of carbon dioxide + poly ethylene glycol + water mixtures at high pressure: Measurements and modelling
Martín, Á.; Pham, H.M.; Kilzer, A.; Kareth, S.; Weidner, E.
Journal Article
2009Quality of producer gas from different biogenous fuels
Mac an Bhaird, S.; Devlin, G.; McDonnell, K.; Owende, P.; Mevißen, N.; Schulzke, T.; Unger, C.
Conference Paper
2009Reliability consideration of low-power-grid-tied inverter for photovoltaic application
Liu, J.; Henze, N.
Conference Paper
2009Tribological and hydrothermal behaviour of silicon carbide under water lubrication
Presser, V.; Krummhauer, O.; Nickel, K.G.; Kailer, A.; Berthold, C.; Raisch, C.
Journal Article
2008Automatisierte Maschinenmodellbildung aus CAE-Daten
Schob, U.; Altmann, S.
Conference Paper
2008Context adaptive interaction in cooperative knowledge-intense processes
Betz, M.; Glukhova, A.; Joop, B.; Veiel, D.
Conference Paper
2008Discrete element simulations of constrained ceramic powder sintering
Wonisch, A.; Kraft, T.; Moseler, M.; Riedel, H.
Journal Article
2008Investigations on the lifetime behaviour of a P23 pipe under fatigue loading
Friedmann, V.; Hartrott, P. von
Conference Paper
2008Model-based material flow analysis of RDF-production
Mrotzek, A.; Marzi, T.; Hiebel, M.
Conference Paper
2008Modellierung von Aufbereitungsprozessen : modellgestützte Stoffflussanalyse der EBS-Herstellung
Mrotzek, A.
Conference Paper
2008Simulation of die filling in 3D with special emphasis on vibration supported filling
Bierwisch, C.; Kraft, T.; Moseler, M.; Riedel, H.
Conference Paper
2008Verbund-Forschungsvorhaben "Systemanalyse reagierender Wirbelschichten"
Blömer, J.
Report
20075th Workshop on Systems Testing and Validation, STV 2007. Proceedings
: Garbajosa, J.; Boegh, J.; Rodriguez-Dapena, P.; Rennoch, A.
Conference Proceedings
2007Analyses of warpage effects induced by passivation and electrode coatings in silicon solar cells
Kohn, C.; Faber, T.; Kübler, R.; Beinert, J.; Kleer, G.; Clement, F.; Erath, D.; Reis, I.; Martin, F.; Müller, A.
Conference Paper
2007Comment on "viscosity measurement by cylindrical compression for numerical modeling of precision lens molding process"
Richter, F.; Hoffmann, H.-J.
Journal Article
2007Comparison of tribological and corrosive behaviour of silicon carbide under water lubrication
Krummhauera, O.; Presserb, V.; Kailera, A.; Nickelb, K.G.
Conference Paper
2007Control of the energy deposition during laser beam welding by oscillation techniques
Mahrle, A.; Beyer, E.
Conference Paper
2007Deformation and failure modelling of high strength adhesives for crash simulation
Greve, L.; Andrieux, F.
Journal Article
2007Keramische Walzensysteme aus Siliciumnitrid
Khader, I.; Gumbsch, P.; Kailer, A.
Conference Paper
2007Model of a solar driven steam jet ejector chiller and investigation of its dynamic operational behaviour
Pollerberg, C.; Dötsch, C.
Conference Paper
2007Modeling texture evolution during hot rolling of magnesium alloy AZ31
Walde, T.; Riedel, H.
Journal Article
2007Modellierung solarbetriebener Dampfstrahlkältemaschinen und Untersuchung des dynamischen Betriebsverhaltens
Pollerberg, C.
Dissertation
2007OPTRES. Assessment and optimisation of renewable energy support schemes in the European electricity market
Ragwitz, M.; Held, A. et al.
Book
2007Stress-induced anisotropy of sintering alumina: Discrete element modelling and experiments
Wonisch, A.; Guillon, O.; Kraft, T.; Moseler, M.; Riedel, H.; Rödel, J.
Journal Article
2007Teaching software modelling in academia and industry
: Bunse, C.; Ludger, T.
Conference Proceedings
2007Temperature distribution during spark plasma sintering (SPS/FAST)
Räthel, J.; Herrmann, M.; Beckert, W.; Holke, R.
Poster
2006Deriving efficient policy portfolios promoting sustainable energy systems - case studies applying invert simulation tool
Kranzl, L.; Stadler, M.; Huber, C.; Haas, R.; Ragwitz, M.; Brakhage, A.; Gula, A.; Figorski, A.
Journal Article
2006Making of state space formulations of dynamic systems
Knüpfer, H.; Illgen, A.; Neugebauer, Reimund; Kranz, B.
Conference Paper
2006Mixing characteristics of a T-shaped micromixer
Deerberg, G.; Grän-Heedfeld, J.; Hennig, T.
Conference Paper
2006Modellierung der TiO2-Beschichtung von Mikropartikeln mit Populationsbilanzen
Zafar, K.; Sgraja, M.; Blömer, J.; Bertling, J.
Journal Article, Conference Paper
2006Zur Wasserdampfaktivierung von Aktivkohlevorprodukten im direkt beheizten Drehrohrreaktor
Horn, C.
Dissertation
2005Anwendung der dynamisch-energetischen Simulation zur Produktivitätssteigerung bei Massivumformmaschinen mit hydraulischen Antrieben
Neugebauer, Reimund; Klug, D.; Noack, S.
Conference Paper
2005Anwendungsorientierte Modellierung und Simulation der Verbrennungsvorgänge in Abfallverbrennungsanlagen
Wolf, C.; Koralewska, R.
Journal Article
2005Entwurf sigma-delta-PLL-basierter Frequenzgeneratoren höherer Ordnung für drahtlose digitale Kommunikationssysteme
Christoffers, N.
Dissertation
2005Experiments and corresponding calculations on thermohydraulic pressure surges in pipes
Neuhaus, T.; Dudlik, A.; Tijsseling, A.S.
Report
2005FORRES 2020: Analysis of the Renewable Energy Sources' Evolution up to 2020
Ragwitz, M.; Schleich, J.; Huber, C.; Resch, G.; Faber, T.; Voogt, M.; Coenraads, R.; Cleijne, H.; Bodo, P.
Report
2005Mikrofluidisches Mischen als Bestandteil mikroreaktionstechnischer Modellierung
Deerberg, G.; Grän-Heedfeld, J.; Hennig, T.; Weidner, E.
Journal Article
2005Mischcharakteristik eines T-förmigen Mikromischers
Deerberg, G.; Grän-Heedfeld, J.; Hennig, T.
Journal Article, Conference Paper
2005Modellierung der Feststoffbildung in Einzeltropfen bei der Sprühtrocknung
Seydel, P.; Blömer, J.; Bertling, J.
Journal Article, Conference Paper
2005Pervaporationsunterstützte Synthese natürlicher Aromastoffe durch lipasekatalysierte Veresterung
Ehrenstein, U.; Hennig, T.; Kabasci, S.; Kreis, P.; Górak, A.
Journal Article
2004The accuracy of hydraulically driven struts for production machines
Neugebauer, Reimund; Noack, S.
Conference Paper
2004Bestehende Fragestellungen und Ausblick auf zukünftige Entwicklungen
Scheibe, A.
Conference Paper
2004Experiment and mathematical modelling of solid formation at spray drying
Seydel, P.; Sengespeick, A.; Blömer, J.; Bertling, J.
Journal Article
2004Informatik - Trendtechnologie in der Automatisierung
Westkämper, E.; Ehrig, H.
Journal Article
2004Investigation and modelling of the gas-antisolvent process
Weber, A.; Kümmel, R.; Kraska, T.
Book Article
2004Mean-risk optimization of electricity portfolios
Eichhorn, A.; Gröwe-Kuska, N.; Liebscher, A.; Römisch, W.; Spangardt, G.; Wegner, I.
Journal Article
2004Planar high index-contrast photonic crystals for telecom applications
März, R.; Burger, S.; Golka, S.; Forchel, A.; Hermann, C.; Jamois, C.; Michaelis, D.; Wandel, K.
Book Article
2004Procedure for multi-material modelling of concept and design prototypes
Grzesiak, A.; Biesinger, B.
Conference Paper
2004Procedure for multi-material modelling of concept prototypes
Biesinger, B.; Grzesiak, A.
Conference Paper
2004A unified treatment of nonclassical nonlinear effects in the propagation of ultrasound in heterogeneous media
Delsanto, P.; Hirsekorn, S.
Journal Article, Conference Paper
2004Zum Gashydratabbau mittels Mammut-Pumpen-Prinzip
Schultz, H.J.
Dissertation
2003Aspekte der experimentellen Brandmodellierung
Schneider, U.; Seifert, U.
Journal Article
2003Beitrag zur Modellierung und Simulation von Fermentationsprozessen
Bergstedt, U.; Deerberg, G.; Fahlenkamp, H.
Conference Paper
2003Ein Beitrag zur Modellierung und Simulation von Prozessen in gerührten Bioreaktoren
Bergstedt, U.; Schultz, H.; Deerberg, G.; Fahlenkamp, H.
Journal Article, Conference Paper
2003Computational materials science
Gumbsch, P.
Conference Paper
2003Development of an integrated model for selective laser sintering
Klocke, F.; Wagner, C.; Ader, C.
Conference Paper
2003Experimente und Berechnungen zur Bildung von Gashydraten
Schulzke, T.; Schultz, H.J.; Ising, M.; Deerberg, G.
Journal Article
2003Identification of dimension in phase space for cutting
Schulz, W.; Eppelt, U.; Heesen, H.; Kostrykin, V.; Michel, J.; Niessen, M.
Conference Paper
2003Mittelfristige risikoorientierte Optimierung von Strombezugsportfolios
Spangardt, G.
Dissertation
2003Modelling piezoelectric modules with interdigitated electrode structures
Beckert, W.; Kreher, W.S.
Journal Article
2003Modelling, simulation and experimental test for process scaling of cutting processes with geometrically defined edge
Kotschenreuther, J.; Delonnoy, L.; Hochrainer, T.; Schmidt, J.; Fleischer, J.; Schulze, V.; Löhe, D.; Gumbsch, P.
Conference Paper
2003Simulation of energy flow in hydraulic drives of forming machines
Neugebauer, Reimund; Noack, S.; Klug, D.
Conference Paper
2003Stereospecific production of hydrophobic compounds with immobilized biocatalysts in stirred tank reactors
Deerberg, G.; Bergstedt, U.; Fänger, C.; Wack, H.
Conference Paper
2003A systematic approach for modeling and simulation of biological production processes in stirred tank reactors
Bergstedt, U.; Deerberg, G.; Fahlenkamp, H.
Conference Paper
2003Zur Modellierung und Simulation von Fermentationsprozessen
Bergstedt, U.
Dissertation
2002Bestimmung der nutzbaren inneren Oberflächen poröser Adsorbentien
Schieferstein, E.; Heil, V.; Horn, C.; Sohnemann, J.; Kümmel, R.
Journal Article
2002Bestimmung des verfügbaren Porenvolumens mikroporöser Adsorbentien
Schieferstein, E.; Horn, C.; Kümmel, R.
Journal Article
2002Dynamische Fabrikstrukturen
Westkämper, E.
Book Article
2002Modellierung und Simulation der Kristallisation in dispersen Systemen
Weiß, C.
Dissertation
2002Modelling context in information brokering processes
Klemke, R.
Dissertation
2002Optimisation of physical and financial power purchase portfolios
Spangardt, G.; Lucht, M.; Althaus, W.
Electronic Publication
2002Zur Modellierung und Simulation gerührter Ein- und Mehrphasenreaktoren mit Zellennetzmodellen
Boltersdorf, Uwe
Dissertation
2001Dynamische Simulation exothermer Reaktionen in Aktivkoksadsorbern
Wagner, C.
Dissertation
2001Entwicklung eines Verfahrens zur Aggregation komplexer Fernwärmenetze
Loewen, A.
Dissertation
2001Generic simulation: Creating the model's structure from a data base
Richter, H.; März, L.
Conference Paper
2001Modelling and optimization of biological processes in stirred tank reactors
Bergstedt, U.; Körner, H.-J.; Boltersdorf, U.; Deerberg, G.; Fahlenkamp, H.
Journal Article
20005th International ERCIM Workshop on Formal Methods for Industrial Critical Systems 2000
: Gnesi, S.; Schieferdecker, I.; Rennoch, A.
Conference Proceedings
2000Energieflußsimulation komplexer hydraulischer Antriebe
Noack, S.; Riede, H.
Presentation
2000Mathematische Modellierung biotechnologischer Produktionsprozesse
Bergstedt, U.; Körner, H.-J.; Kabasci, S.; Deerberg, G.
Journal Article, Conference Paper
2000Modeling Mass Transfer and Crystallization in Disperse Systems
Weiss, C.; Hennig, T.; Kümmel, R.; Tschernjaew, J.
Journal Article
2000Modellierung der Adsorptions- und Desorptionsvorgänge in Aktivkohlefiltern
Sohnemann, J.; Horn, C.; Guderian, J.
Conference Paper
2000Modelling, visualization, and interaction techniques for diagnosis and treatment planning in cardiology
Behr, J.; Choi, S.-M.; Großkopf, S.; Hong, H.; Nam, S.-A.; Peng, Y.; Hildebrand, A.; Kim, M.-H.; Sakas, G.
Journal Article
2000Modellunterstützte Projektierung und Eigenschaftsermittlung
Neugebauer, Reimund; Noack, S.
Journal Article
2000Numerische Zeitbereichsmodellierung elastischer Wellen in krummlinigen Koordinaten
Schubert, F.; Köhler, B.; Kühnicke, H.
Conference Paper
2000Simulation von Produktionsprozessen in der Biotechnologie
Bergstedt, U.; Körner, H.-J.; Kabasci, S.; Deerberg, G.
Journal Article
2000A systematic approach for simulation of fermentation processes
Bergstedt, U.; Körner, H.-J.; Kabasci, S.; Deerberg, G.
Conference Paper
2000Zur Betriebsoptimierung in Kraft-Wärme-Kopplungssystemen unter Berücksichtigung der Speicherfähigkeit des Fernwärmenetzes
Tröster, S.
Dissertation
1999Competitive production networks through software-based reengineering and added value networks
Sihn, W.; Mußbach-Winter, U.; Hägele, T.; Deutsch, O.
Conference Paper
1999Competitive Production Networks through Software-based Reengineering and Added Value Networks
Sihn, W.; Bischoff, J.; Hägele, T.; Deutsch, O.
Conference Paper
1999Dynamische Fabrikstrukturen
Westkämper, E.
Book Article
1999Entwicklung und Management produktionsunterstützender Prozesse
Hummel, V.; Göltl, F.
Conference Paper
1999Gas antisolvent crystallization - from fundamentals to industrial applications
Weber, A.; Weiß, C.; Tschernjaew, J.; Kümmel, R.
Conference Paper
1999High-Speed Mathematical Modeling of Ultrasound Propagation in Cladded and Welded Components Using Gaussian Beam Superposition
Spies, M.
Conference Paper
1999Mathematische Modellierung biotechnologischer Produktionsprozesse
Bergstedt, U.; Körner, H.-J.; Kabasci, S.; Deerberg, G.
Conference Paper
1999Mathematische Modellierung biotechnologischer Produktionsprozesse
Bergstedt, U.; Kabasci, S.; Deerberg, G.
Conference Paper
1999Modeling of Sound Fields through Austenitic Welds
Schmitz, V.; Walte, F.; Chakhlov, S.
Conference Paper
1999Modellierung von Stofftransport und Kristallisation in dispersen Systemen
Weiss, C.; Hennig, T.; Kümmel, R.; Tschernjaew, J.
Journal Article
1999Modelling Real World Objects Combining Photogrammetric Reconstruction and Semantic Description
Ristow, B.
Conference Paper
1999One and two-stage digestion of solid organic waste
Schober, G.; Schäfer, J.; Schmid Staiger, U.; Trösch, W.
Journal Article
1999Potential zur Simulation in der Fertigung von Leitungssätzen
Merdes, M.
Conference Paper
1999Zum dynamischen Verhalten eines biologischen Rieselbettreaktors mit adsorbierenden Trägermaterialien
Adami, C.
Dissertation
1998Integrated optics towards third dimension
Wächter, C.; Hennig, T.; Bauer, T.; Bräuer, A.; Karthe, W.
Conference Paper
1998Modellierung der Ultraschallausbreitung in austenitischen Schweißverbindungen - Strahlenverfolgung (Ray Tracing) gegenüber EFIT
Marklein, R.; Langenberg, K.J.; Köhler, B.; Schurig, C.; Walte, F.; Hannemann, R.; Kaczorowski, T.
Conference Paper
1998Modellierung und Simulation verfahrenstechnischer Systeme
Schlüter, S.
Conference Paper
1998Modellierung und Strömungsoptimierung des Abgasventils von Koksöfen
Cremer, I.; Hiller, R.; Beckmann, R.; Dittié, J.; Kim, R.; Reinke, M.
Conference Paper
1998Oberhausener UMSICHT-Tage 1998
 
Conference Proceedings
1998Optimierung von Energieversorgung und Energiebezug im Kraftwerksverbund
Lucht, M.; Faulenbach, D.; Althaus, W.
Conference Paper
1998Optimized Capacity Adjustment for a Cost-effective Fulfilment of Customer Requirements under a Manufacturing on Demand Strategy
Aupperle, G.
Conference Paper
1998Ozone episodes in Athens, Greece. A modelling approach using data from the medcaphot-trace
Ziomas, I.C.; Tzoumaka, P.; Balis, D.; Melas, D.; Zerefos, C.S.; Klemm, O.
Journal Article
1998Petri net based modelling, planning and control of logistical processes under environmental goals and constraints
Bullinger, H.-J.; Steinaecker, J. von
Conference Paper
1998Simulation and modelling for managing the Riga harbour container terminal
Blümel, E.; Merkuryev, Y.; Novitsky, L.; Tolujev, Y.
Conference Paper
1998Strategieorientierte Produktionssicherung - Auf dem Weg zu mehr Instandhaltungstransparenz
Proksch, R.
Conference Paper
1997Accelerated Space-Time Modeling of Quasi-Longitudinal Waves in Austenitic Weld Structures
Kröning, M.; Spies, M.
Conference Paper
1997Application of the beam propagation method to diffused transmission gratings
Wächter, C.; Palme, M.
Journal Article
1997Computer-unterstütztes Design und Modellierung für die Ultraschall-Prüfung: CADMUS-on-PC
Wüstner, H.; Rieder, H.; Spies, M.; Walte, F.
Conference Paper
1997Coupling enterprise modelling with EDM
Jasnoch, U.; Greipel, K.-P.
Conference Paper
1997Data encapsulation and data abstraction with petri nets: A graphical visualization of modules
Fricke, O.
Conference Paper
1997Data encapsulation and date abstraction with petri nets : A graphical visualization of modules
Fricke, O.
Conference Paper
1997Geometrical cloning of 3D objects via simultaneous registration of multiple range images
Neugebauer, P.J.
Conference Paper
1997IFAM advancing MIM technology
Weber, M.; Petzoldt, F.; Hartwig, T.; Veltl, G.
Journal Article
1997Managing and controlling growing harbour terminals
: Blümel, E.
Book
1997Modellgestützte Sicherheitsbetrachtungen zu Aktivkoksadsorbern für die Rauchgas[end]reinigung in thermischen Abfallbehandlungsanlagen
Guderian, J.; Seifert, U.; Stein, J.; Wagner, C.
Conference Paper
1997Modelling and verification with petri nets: Comparing a state oriented and event oriented approach
Mackenthun, R.; Voorhoeve, M.
Conference Paper
1997A new approach for semiconductor models basing on SPICE model equations
Leitner, T.
Conference Paper
1997Numerical Modeling and Imaging of Three-Dimensional Transducer Fields in Anisotropic Materials
Batra, N.K.; Simmonds, K.E.; Mignogna, R.B.; Spies, M.
Conference Paper
1997Petri net based verification of distributed algorithms
Kindler, E.; Reisig, W.; Völzer, H.; Walter, R.
Journal Article
1997Strategieorientierte Produktionssicherung - SOP
Proksch, R.
Conference Paper
1997Vom physischen zum CAD-Modell
Scharm, H.; Knorpp, R.
Journal Article
1997Zur sicherheitstechnischen Beurteilung von Semibatch-Prozessen mit Gas-Flüssigkeits-Systemen
Deerberg, G.
Dissertation
1996Calculation and measurement of the ultrasonic signals generated by ablating material with a Q-switched pulse laser
Hoffmann, A.; Arnold, W.
Journal Article
1996Coupled finite element and network simulation for microsystem components
Eccardt, P.-C.; Knoth, M.; Ebest, G.; Landes, H.; Clauß, C.; Wünsche, S.
Conference Paper
1996Modelling and simulation for designing a data processing system for the Riga harbour container terminal
Novitski, L.; Blümel, E.; Tolujev, J.
Conference Paper
1996Port terminal simulation
Tolujev, J.; Blümel, E.
Book
1996Strategieorientierte Produktionssicherung
Proksch, R.
Conference Paper
1995Analog hardware description language for modeling and simulation of microsystems and mechatronics
Bielefeld, J.; Pelz, G.; Zimmer, G.
Conference Paper
1995A Light Mobile Tracked Machine with Advanced Sensing, World Modelling and Communications
Baum, W.
Conference Paper
1995Modelling and design of complex systems with petri nets
Borusan, A.
Conference Paper
1995Results of benchmark tests for different numerical BPM algorithms
Nolting, H.-P.; Marz, R.
Journal Article
1994Advances in robot calibration - modelling, parameter identification, measurement
Schröer, K.; Albright, S.L.; Grethlein, M.; Lisounkin, A.; Albada, G.D. van; Lagerberg, J.M.; Visser, A.
Conference Paper
1994Analysis-aided geometric design based on constrained parametric structures
Fischer, R.; Vieira, A.S.; Rix, J.
Book Article
1994Calibration applied to quality control in robot production
Schröer, K.; Bernhardt, R.; Albright, S.; Wörn, H.; Kyle, S.; Albada, D. van; Smyth, J.; Meyer, R.
Conference Paper
1994Compact electro-thermal simulation of ESD-protection elements
Russ, C.; Gieser, H.; Egger, P.; Irl, S.
Conference Paper
1994ESD protection elements during HBM stress tests - further numerical and experimental results
Russ, C.; Gieser, H.; Verhaege, K.
Conference Paper
1994ESD protection elements during HBM stress tests - further numerical and experimental results
Russ, C.; Gieser, H.; Verhaege, K.
Conference Paper
1994Modellierung und experimentelle Untersuchung laserinduzierter Plasmen
Völlmar, S.; Granse, G.; Schultrich, B.; Witke, T.
Conference Paper
1994On modeling of ion implantation at high temperatures
Pichler, P.; Schork, R.
Journal Article
1994Results of benchmark tests for different numerical BPM algorithms
Nolting, H.-P.; Marz, R.
Conference Paper
1994ROTEX - tele-calibration using distance measurements
Schröer, K.; Lueck, R.; Grethlein, M.
Conference Paper
1994Simulation in der materialflußorientierten PPS
Blümel, E.; Hintze, S.; Seidel, H.
Conference Paper
1994Zero-defect manufacturing by means of a learning supervision of process chains
Westkämper, E.; Warnecke, H.-J.
Book Article
1993DaScript 3D. Integrating 3D graphics in a page description language
Samara, V.
Conference Paper
1993Dynamic objects in virtual worlds - integrating simulations in a virtual reality toolkit -
Astheimer, P.; Dai, F.
Conference Paper
1993Feature-based modelling in support of embodiment design
Rix, J.; Bachmann, T.; Daniel, M.; Pahl, G.
Journal Article
1993GIVEN plus plus - a toolkit for advanced 3D user interface construction
Böhm, K.; Sokolewicz, M.; Zedler, J.
Conference Paper
1993Eine neue Qualität bei der automatisierten Ultraschallprüfung
Kappes, W.; Kröning, M.; Schirra, M.; Schmitz, V.
Conference Paper
1993Quantitative Modellierung von Ultraschallprüfsituationen - Vergleich von Theorie und Experiment
Langenberg, K.-J.; Zanger, P.; Schuhmacher, S.
Conference Paper
1993STEP and its relation to computer graphics
Rix, J.; Burkert, A.; Ungerer, M.
Conference Paper
1993Using the GIVEN++ toolkit for system development in MuSE
Sokolewicz, M.; Wirth, H.; Böhm, K.; John, W.
Conference Paper
1993Werkzeuge zur Spezifikation von Komponenten und Schaltungen
Rensen, J.; Meyer zu Bexten, E.; Moraga, C.; Thomalla, D.
Conference Paper
1993Werkzeuge zur Spezifikation von Komponenten und Schaltungen
Rensen, J.; Meyer zu Bexten, E.; Moraga, C.; Thomalla, D.
Conference Paper
1992Contoured material removal using cw-Q-switch Nd-YAG-laser radiation
Läßiger, B.; Nießen, M.; Ott, P.; Treusch, H.G.; Beyer, E.
Conference Paper
1992Gold and platinum diffusion. The key to the understanding of intrinsic point defect behaviour in silicon
Zimmermann, H.; Ryssel, H.
Journal Article
1992Modellbasierte Regelung eines hydraulischen Großroboters
Göller, B.; Eberle, F.; Hirsch, U.; Jacubasch, A.; Kuntze, H.-B.
Conference Paper
1992Modellierung des dynamischen Verhaltens von Kurzkanal MOS-FETs
Budde, W.
Conference Paper
19913D sweeping tools in the postscript interpreter dascript
Samara, V.
Report
1991Adaptive temperature control during transformation hardening with CO2-laser
Drenker, A.; Böggering, L.; Wissenbach, K.; Beyer, E.; Kramer, R.
Conference Paper
1991Die Echohöhe und Echodynamik in der Ultraschallprüfung und ihre Berechnung mit vereinfachten Modellen
Wüstenberg, H.; Walte, F.
Conference Paper
1991Lastorientierter Test von Steuerungssoftware für automatische Materialflußsysteme
Bandow, G.
Conference Paper
1991Rechnergestützte Modellierung von Ultraschallprüfköpfen nach dem KLM-Modell
Gebhardt, W.
Conference Paper
1990Modelling of a fluidized bed bioreactor for immobilized enzymes. Part 1.
Bauer, W.; Kiesser, T.; Oertzen, G.A.
Conference Paper
1990Modelling of a fluidized bed bioreactor for immobilized enzymes. Part 2.
Bauer, W.; Kiesser, T.; Oertzen, G.A.
Conference Paper
1990The systematical realisation of complex simulation stustudies
Augustin, M.
Conference Paper
1990Zum Zusammenhang von Rißgeschwindigkeit und R-Kurven
Mohrmann, R.; Gaus, R.
Conference Paper
1989Dynamic and steady state modelling of an immobilized glucose isomerase fluidized bed bioreactor
Oertzen, G.A.; Kalogerakis, N.; Behie, L.A.; Kiesser, T.; Bauer, W.
Conference Paper
1989Einfluß von Stofftransport und Kinetik immobilisierter Lipasen in heterogenen Stoffsystemen auf Auslegung und Entwicklung von Enzymreaktoren
Luck, T.
Dissertation
1989Influence of hydrodynamics and kinetics on performance of lactic acid concentration by electrodialysis
Murdia, L.K.
Book
1989SARS - IGS - VICO eine Entwicklungsumgebung für Automatisierungssysteme
Bähre, R.; Koch, G.B.; Subel, H.-P.
Conference Paper
1989Untersuchungen zum Einsatz und zur Modellierung von Biowäschern am Beispiel der Reinigung ethanolhaltiger Abluft mit Saccharomyces cerevisiae
Beck-Gasche, M.
Dissertation
1988An iconic user interface for geometric modelling
Rix, J.; Teixeira, J.C.
Conference Paper
1988Möglichkeiten der rechnergestützten Modellierung zur wirtschaftlichen Bearbeitung praktischer Ultraschall-Prüfprobleme
Höller, P.; Langenberg, K.-J.; Schmitz, V.
Conference Paper
1988Pulsed wavefield diffraction by circular cylindrical voids and cracklike defects - elastodynamic numerical modelling and experiments
Langenberg, K.-J.; Schmitz, V.
Conference Paper
1986How and where can AI contribute to simulation?
Bernemann, S.; Joemann, J.; Hellingrath, B.
Conference Paper
1974Influencing the efficiency rate of the international network by different modes of handling ineffective call attempts
Evers, R.; Manz, K.
Conference Paper