Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2020A survey on modeling and forecasting the energy consumption in discrete manufacturing
Reinhardt, Heiner; Bergmann, Jan-Peter; Münnich, Marc; Rein, David; Putz, Matthias
Journal Article, Conference Paper
2020Toward an integrative model of trust for digital emergency communication
Fotouhi Tehrani, Pouyan; Kalckreuth, Niklas von; Lamprecht, Selma
Conference Paper
2019Analytical equation for the mesopore size distribution function of open cylindrical capillaries
Kutarov, Volodymyr V.; Schieferstein, Eva
Journal Article
2019Assessment of diffusional mobilities in bcc Cu-Sn and bcc Cu-Zn alloys
Alvares, E.D.M.; Preußner, J.
Journal Article
2019Combined and Fast Computable Thermal Models for Situationally Optimal Tempering of Machine Tool Components
Weber, Juliane; Glänzel, Janine; Popken, Jens; Shabi, Linart; Weber, Jürgen
Journal Article, Conference Paper
2019Comprehensive Electrical Loss Analysis of Monolithic Interconnected Multi-Segment Laser Power Converters
Kimovec, R.; Helmers, H.; Bett, A.W.; Topic, M.
Journal Article
2019Extracting Metal and Edge Recombination Parameters which are Compatible with Multi-Dimensional Cell Simulations
Saint-Cast, P.; Herrmann, D.; Baliozan, P.; Stolzenburg, H.; Höffler, H.; Fell, A.
Conference Paper
2019Fast and Reliable State-of-Health Model of a PEM Cathode Catalyst Layer
Schneider, P.; Sadeler, C.; Scherzer, A.-C.; Zamel, N.; Gerteisen, D.
Journal Article
2019An Image-based Kinematic Model of the Tibiotalar and Subtalar Joints and its Application to Gait Analysis in Children with Juvenile Idiopathic Arthritis
Montefiori, Erica; Modenese, Luca; Marco, Roberto di; Magni-Manzoni, Silvia; Malattia, Clara; Petrarca, Maurizio; Ronchetti, Anna; Tanturri De Horatio, Laura; Dijkhuizen, Pieter van; Wang, Anqi; Wesarg, Stefan; Viceconti, Marco; Mazzà, Claudia
Journal Article
2019Interlaminar fracture analysis of consolidated GF-PA6-tapes
Schober, M.; Hohe, J.; Gumbsch, P.; Kuboki, T.
Book Article
2019Large-signal modeling of a scalable high-Q AlGaN/GaN high electron-mobility varactor
Amirpour, Raul; Schwantuschke, Dirk; Raay, Friedbert van; Brueckner, Peter; Quay, Rüdiger; Ambacher, Oliver
Journal Article
2019Modeling and Design of a Linear-Assisted Zeta Conveter
Martins, Leandro Tomé; Radecker, Matthias; Fracaro, Marcelo Henrique; Mendonça, Lucas Sangoi; Bisogno, Fábio Ecke; Killat, Dirk
Conference Paper
2019Optimization of District Heating Systems. European Energy Exchange Price-Driven Control Strategy for Optimal Operation of Heating Plants
Dahrash, A.; Steingrube, A.; Ochs, F.; Elci, M.
Conference Paper
2019Outdoor microalgae cultivation at different biomass concentrations - Assessment of different daily and seasonal light scenarios by modeling
Holdmann, Claudia; Schmid-Staiger, Ulrike; Hirth, Thomas
Journal Article
2019Performance modeling of PVT collectors: Implementation, validation and parameter identification approach using TRNSYS
Jonas, D.; Lämmle, M.; Theis, D.; Schneider, S.; Frey, G.
Journal Article
2019Post-Implantation Annealing of Platinum in Silicon
Johnsson, Anna
: Pichler, Peter; Weigel, Robert
Dissertation
2019A Survey on Automatic Model Generation for Material Flow Simulation in Discrete Manufacturing
Reinhardt, Heiner; Weber, Marek; Putz, Matthias
Journal Article, Conference Paper
2019Thermal Modelling of Photovoltaic Modules in Operation and Production
Mittag, M.; Vogt, L.; Herzog, C.; Pfreundt, A.; Shahid, J.; Neuhaus, D.H.; Wirth, H.
Conference Paper
2019Thermochemical Stress in Solar Cells: Contact Pad Modeling and Reliability Analysis
Rendler, L.; Romer, P.; Beinert, A.; Stecklum, S.; Kraft, A.; Eitner, U.; Wiese, S.
Journal Article
2019Usage Simulation and Testing with xAPI for Adaptive E-Learning
Streicher, Alexander; Bach, Lukas; Roller, Wolfgang
Conference Paper
2019Wider economic and social implications of sustainable economy approaches: Some insights from a scenario exercise
Walz, Rainer; Oldenburg, Clara; Pfaff, Matthias; Schuler, Johannes; Gotsch, Matthias; Marscheider-Weidemann, Frank; Hiete, Michael
Journal Article
2018Application of waveform relaxation in distributed process co-simulation
Wack, Thorsten; Schlüter, Stefan; Hennig, Torsten; Wagner, Henning; Diekmann, Andreas; Zheng, Qinghua; Grundler, Jonas
Journal Article
2018Characterization and modeling of airbag fabrics subjected to asymmetric biaxial loading and elevated temperatures
Boljen, Matthias; Rack, Nils Alexander; Kölble, Florian; Rodinger, Silvia; Harwick, Wilfried
Conference Paper
2018Decision Support for Tactical Planning
Kandler, Ute; Simroth, Axel; Morgado, João; Duarte, Emanuel
Conference Paper
2018A detailed full-cell model of a 2018 commercial PERC solar cell in Quokka3
Fell, Andreas; Altermatt, Pietro P.
Journal Article
2018Impact of Uncertainties of Fundamental Models on Simulated Silicon Solar Cell Efficiencies
Wasmer, S.; Fell, A.; Greulich, J.M.
Conference Paper
2018Influence of Al doping concentration and annealing parameters on TiAl based Ohmic contacts on 4H-SiC
Kocher, Matthias; Rommel, Mathias; Erlbacher, Tobias; Bauer, Anton J.
Conference Paper
2018Load shifting potentials of plug-in electric vehicles - a case study for Germany
Michaelis, Julia; Gnann, Till; Klingler, Anna-Lena
Journal Article
2018Modeling edge recombination in silicon solar cells
Fell, Andreas; Schön, Jonas; Müller, Matthias; Wöhrle, Nico; Schubert, Martin C.; Glunz, Stefan W.
Journal Article
2018Modeling of block copolymer dry etching for directed self-assembly lithography
Belete, Zelalem; Bär, Eberhard; Erdmann, Andreas
Conference Paper
2018Modeling the catalytic conversion of steel mill gases using the example of methanol synthesis
Schlüter, Stefan; Hennig, Thorsten
Journal Article
2018An overview of joint activities on computational imaging and compressive sensing systems by NATO SET-232
Bosq, Todd du; Agarwal, Sanjeev; Dijk, Judith; Gungo, Alper; Guven, H. Emre; Haran, Terence L.; Laurenzis, Martin; Leonard, Kevin; Mahalanobis, Abhijit; Paunescu, Gabriela; Piper, Jonathan; Repasi, Endre
Conference Paper
2018Predicting Yields of Bifacial PV Power Plants - What Accuracy is Possible?
Chiodetti, M.; Kang, J.; Reise, C.; Lindsay, A.
Conference Paper
2018Security Verification of Third Party Design Files in Manufacturing
Giehl, Alexander; Wiedermann, Norbert
Conference Paper
2018Shape processing for content generation
Schinko, Christoph
: Fellner, Dieter W. (Supervisor); Klein, Reinhard (Supervisor)
Dissertation
2018A two-scale approach for the computation of flow through pleated filters based on real image data
Kabel, Matthias; Kirsch, Ralf; Osterroth, Sebastian; Rief, Stefan
Conference Paper
2017Angle dependence of solar cells and modules: The role of cell texturization
Geisemeyer, I.; Tucher, N.; Müller, B.; Steinkemper, H.; Hohl-Ebinger, J.; Schubert, M.C.; Warta, W.
Journal Article
2017Derivation and application of a generalized correlation for mass transfer in packed beds
Reichelt, Erik; Jahn, Matthias; Lange, Rüdiger
Journal Article
2017Design and prototyping of self-learning methods for semi-automated model creation as a reference behavior in distributed embedded system
Salvi, Aniket
: Potluri, Sasanka (Supervisor); Stiller, Michael (Supervisor)
Master Thesis
2017Do plug-in electric vehicles cause a change in travel behavior?
Heilig, Michael; Gnann, Till; Plötz, Patrick; Mallig, Nicolai; Briem, Lars; Kagerbauer, Martin; Vortisch, Peter
Presentation
2017Einsatz hybrider Optimierungsverfahren zur Inbetriebnahme elektromechanischer Systeme
Hipp, Kevin
: Neugebauer, R.; Putz, M.
Dissertation
2017A fast and easy perovskite solar cell simulation tool featuring ion migration
Fell, Andreas; Walter, Daniel; Glunz, Stefan W.
Conference Paper
2017FEM-based development of novel back-contact PV modules with ultra-thin solar cells
Beinert, Andreas; Leidl, Roman; Sommeling, Paul; Eitner, Ulrich; Aktaa, Jarir
Conference Paper
2017Go-3D 2017: Mit 3D Richtung Maritim 4.0
: Lukas, Uwe von (Hrsg.); Mahnke, Eva-Maria (Hrsg.); Bauer, Kristine (Hrsg.)
Conference Proceedings
2017Modeling of edge recombination losses in half-cells
Fell, Andreas; Sträter, H.; Müller, M.; Steinkemper, Heiko; Schön, Jonas; Hermle, Martin; Schubert, Martin C.; Neuhaus, D.H.; Glunz, Stefan W.
Conference Paper
2017Platinum diffusion for advanced silicon power devices
Badr, Elie
: Pichler, Peter; Wellmann, Peter
Dissertation
2017Protocol modeling accuracy in VANET simulators
Bittl, Sebastian; Roscher, Karsten
Conference Paper
2016Benchmarking sensors in smart environments - Method and use cases
Braun, Andreas; Wichert, Reiner; Kuijper, Arjan; Fellner, Dieter W.
Journal Article
2016Cryogenic manufacturing processes
Jawahir, I.S.; Attia, H.; Biermann, Dirk; Duflou, Joost R.; Klocke, Fritz; Meyer, D.; Newman, S.T.; Pusavec, F.; Putz, Matthias; Rech, J.; Schulze, V.; Umbrello, D.
Journal Article, Conference Paper
2016Entwicklung einer neuen Methode zur Ansteuerung von Ultraschall-Phased Arrays
Gommlich, Andreas
: Meyendorf, Norbert (Betreuer/Gutachter); Gerlach, Gerald (Gutachter); Holstein, Peter (Gutachter); Schubert, Frank (Betreuer)
Dissertation
2016Finite aperture multipole sources, radiation, and impedance loading in fluid-filled boreholes
Geerits, Tim; Kranz, Burkhard
Conference Paper
2016Investigation of Thermomechanical Stress in Solar Cells with Multi Busbar Interconnection by Finite Element Modeling
Rendler, L.C.; Kraft, A.; Ebert, C.; Wiese, S.; Eitner, U.
Conference Paper
2016Mechanical stress in solar cells with multi busbar interconnection - parameter study by FEM simulation
Rendler, L.C.; Kraft, A.; Ebert, C.; Eitner, U.; Wiese, S.
Conference Paper
2016Mobility, singularity, and kinematics analyses of a novel spatial parallel mechanism
Xie, Fugui; Liu, Xin-Jun; Luo, Xuan; Wabner, Markus
Journal Article
2016A Modular Rule-Based Visual Interactive Creation of Tree-Shaped Geo-Located Networks
Brodkorb, Felix; Kopp, Manuel; Kuijper, Arjan; Landesberger, Tatiana von
Conference Paper
2016Reintroducing environmental change drivers in biodiversity-ecosystem functioning research
Laender, Frederik de; Rohr, Jason R.; Ashauer, Roman; Baird, Donald J.; Berger, Uta; Eisenhauer, Nico; Grimm, Volker; Hommen, Udo; Maltby, Lorraine; Meliàn, Carlos J.; Pomati, Francesco; Roessink, Ivo; Radchuk, Viktoriia; Brink, Paul J. van den
Journal Article
2016Simplified device simulation of silicon solar cells using a lumped parameter optical model
Fell, A.; McIntosh, K.R.; Fong, K.C.
Journal Article
2016A simulation based optical and electrical approach to estimate energy yield of various designs of curved modules
Hanifi, Hamed; Pfau, Charlotte; Schneider, Jens; Bagdahn, Jörg
Conference Paper
2016The software architecture to control the Cherenkov Telescope Array
Oya, I.; Füßling, M.; Antonino, Pablo; Conforti, V.; Hagge, L.; Melkumyan, D.; Morgenstern, Andreas; Tosti, G.; Schwanke, U.; Schwarz, J.; Wegner, P.; Colomé, J.; Lyard, E.
Conference Paper
2016VASCO - Mastering the Shoals of Value Stream Mapping
Berndt, Rene; Silva, Nelson; Caldera, Christian; Krispel, Ulrich; Eggeling, Eva; Sunk, Alexander; Edtmayr, Thomas; Sihn, Wilfried; Fellner, Dieter W.
Conference Paper
2016Visual perception of 3D printed translucent objects
Vu, Bui Minh; Urban, Philipp; Tanksale, Tejas Madan; Nakauchi, Shigeki
Conference Paper
2015Automatic pose optimization for robotic processes
Schneider, Ulrich; Diaz Posada, Julian Ricardo; Verl, Alexander
Conference Paper
2015CPV module design optimization for advanced multi-junction solar cell concepts
Steiner, M.; Kiefel, P.; Siefer, G.; Wiesenfarth, M.; Dimroth, F.; Krause, R.; Gombert, A.; Bett, A.W.
Conference Paper
2015DTIP 2015, 17th Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS
: Benoit, Charlot; Mita, Yoshio; Nouet, Pascal; Pressecq, Francis; Schröpfer, Gerold; Rencz, Marta; Schneider, Peter
Conference Proceedings
2015Early energy estimation of heterogeneous embedded networks within adaptive systems
Heinrich, Patrick; Gossen, Dietrich; Oswald, Erik; Knorr, Rudi
Conference Paper
2015Enhanced pressure response in ZnO nanorods due to spontaneous polarization charge
Seifikar, M.; O'Reilly, E.P.; Christian, B.; Lebedev, V.; Volk, J.; Erdélyi, R.; Lukács, I.E.; Dauksevicious, R.; Gaidys, R.
Conference Paper
2015Evaluation of various retrofitting concepts of building envelope for offices equipped with large radiant ceiling panels by dynamic simulations
Jordan, S.; Hafner, J.; Kuhn, T.E.; Legat, A.; Zbašnik-Senegačnik, M.
Journal Article
2015Impact of inhomogeneous catalyst layer properties on impedance spectra of polymer electrolyte membrane fuel cells
Gerteisen, D.
Journal Article
2015Modeling and simulation of filtration processes
Iliev, Oleg; Kirsch, Ralf; Lakdawala, Zahra; Rief, Stefan; Steiner, Konrad
Book Article
2015Optimization of pulse-modulation based ToF imaging systems
Süss, Andreas; Tan, Yenn Leng; Rosmeulen, Maarten; Hosticka, Bedrich J.
Conference Paper
2015Potentials and limitations of SAR image simulators - a comparative study of three simulation approaches
Balz, Timo; Hammer, Horst; Auer, Stefan
Journal Article
2015Reduced Shading Effect on Half-Cell Modules - Measurement and Simulation
Hanifi, Hamed; Schneider, Jens; Bagdahn, Jörg
Conference Paper
2015Simulation in thin film technology
Turowski, M.; Jupe, M.; Ehlers, H.; Melzig, T.; Pflug, A.; Ristau, D.
Conference Paper
2015Simulation of a polarized laser beam reflected at the sea surface: Modeling and validation
Schwenger, Frédéric
Conference Paper
2015YieldOpt, a model to predict the power output and energy yield for concentrating photovoltaic modules
Steiner, M.; Siefer, G.; Hornung, T.; Peharz, G.; Bett, A.W.
Journal Article
2014Analysis on the exploitation of EV fast charging to prevent extensive grid investments in suburban areas
Dallmer-Zerbe, K.; Stillahn, T.; Erge, T.; Wille-Haussmann, B.; Wittwer, C.
Journal Article
2014Analytical modeling of industrial-related silicon solar cells
Fellmeth, T.; Clement, F.; Biro, D.
Journal Article
2014Architecture-based simulation of quality attributes in the context of software ecosystems
Flat, Waldemar
: Knauber, Peter (Supervisor); Knodel, Jens (Supervisor)
Master Thesis
2014A benchmarking model for sensors in smart environments
Braun, Andreas; Wichert, Reiner; Kuijper, Arjan; Fellner, Dieter W.
Conference Paper
2014An evaluation environment and methodology for automotive media streaming applications
Protzmann, Robert; Massow, Kay; Radusch, Ilja
Conference Paper
2014Fast and Exact Plane-based Representation for Polygonal Meshes
Krispel, Ulrich; Ullrich, Torsten; Fellner, Dieter W.
Conference Paper
2014Heterogeneities at the cell level by modeling and experiments
Gerteisen, D.; Zamel, N.
Presentation
2014Increasing the lifetime of electronic packaging by higher temperatures: Solders vs. silver sintering
Hutzler, Aaron; Tokarski, Adam; Kraft, Silke; Zischler, Sigrid; Schletz, Andreas
Conference Paper
2014Integrating the Modelica DSL into a platform for model-based tool interoperability
Tcholtchev, Nikolay; Dudeck, Grit; Wagner, Michael; Hein, Christian; Prakash, Arun; Ritter, Tom
Conference Paper
2014Kinetic modeling of rhamnolipid production by Pseudomonas aeruginosa PAO1 including cell density-dependent regulation
Henkel, M.; Schmidberger, A.; Vogelbacher, Markus; Kühnert, Christian; Beuker, J.; Bernard, Thomas; Schwartz, T.; Syldatk, C.; Hausmann, R.
Journal Article
2014Loss of wire tension in the wire web during the slurry based multi wire sawing process
Meißner, D.; Schoenfelder, S.; Hurka, B.; Zeh, J.; Sunder, K.; Koepge, R.; Wagner, T.; Grün, A.; Hagel, H.-J.; Moeller, H.J.; Schwabe, H.; Anspach, O.
Journal Article
2014Modeling and simulation of a resilient dynamic protection system to protect critical infrastructures
Klein, Ruediger; Kober, Manuel
Conference Paper
2014Modeling the soiling of glazing materials in arid regions with geographic information systems (GIS)
Herrmann, J.; Slamova, K.; Glaser, R.; Köhl, M.
Conference Paper, Journal Article
2014Prediction of silicon PV module temperature for hot spots and worst case partial shading situations using spatially resolved lock-in thermography
Geisemeyer, I.; Fertig, F.; Warta, W.; Rein, S.; Schubert, M.C.
Journal Article
2014Shaping of ceramics using residual stresses
Höpfel, H.; Pfeiffer, W.
Conference Paper
2013Application of tool-specific simulation algorithms to Memristor models written in Modelica
Majetta, Kristin; Clauß, Christoph; Schmidt, Torsten; Tetzlaff, Ronald
Conference Paper
2013Can anti-soiling coating on solar glass influence the degree of performance loss over time of PV modules drastically
Klimm, E.; Lorenz, T.; Weiss, K.-A.
Conference Paper
2013Context modeling for dynamic configuration of automotive functions
Weiß, Gereon; Grigoleit, Florian; Struss, Peter
Conference Paper
2013Hybrid dynamical systems for memristor modelling
Haase, Joachim; Lange, André
Conference Paper
2013Kinematische Modellierung und Regelung omnidirektionaler, nicht-holonomer Fahrwerke
Connette, Christian Pascal
: Verl, Alexander (Hauptberichter)
Dissertation
2013Kinetic modeling of the time course of N-butyryl-homoserine lactone concentration during batch cultivations of Pseudomonas aeruginosa PAO1
Henkel, M.; Schmidberger, A.; Kühnert, Christian; Beuker, J.; Bernard, Thomas; Schwartz, T.; Syldatk, C.; Hausmann, R.
Journal Article
2013Method for situation-based modeling and simulation of assembly systems
Neumann, Michael; Westkämper, Engelbert
Conference Paper, Journal Article
2013Modelling and analysis of execution traces for real-time applications
Ramamurthy, Preethi
: Rafiq, Salman (Betreuer); Wong, Stephan (Advisor); Bertels, Koen (Advisor); Zaidman, Andy (Advisor)
Master Thesis
2013Numerical power balance and free energy loss analysis for solar cells including optical, thermodynamic, and electrical aspects
Greulich, J.; Höffler, H.; Würfel, U.; Rein, S.
Journal Article
2013Simulation of natural gas production from submarine gas hydrate
Janicki, Georg; Schlüter, Stefan; Hennig, Torsten; Deerberg, Görge
Journal Article, Conference Paper
2013Simulation of natural gas production from submarine gas hydrate deposits combined with CO2 storage
Janicki, Georg; Schlüter, Stefan; Hennig, Torsten; Deerberg, Görge
Poster
20123D-modeling of an integrated SOFC stack unit
Ganzer, Gregor; Schöne, Jakob; Beckert, Wieland; Megel, Stefan; Michaelis, Alexander
Poster, Conference Paper
2012Admittance matrix of a trapezoidal piezoelectric heterogeneous bimorph
Schächtele, Jonathan; Goll, Erich; Muralt, Paul; Kaltenbacher, Dominik
Journal Article
2012Calculating the stress of multi-track formations in induction-assisted laser cladding
Brückner, F.; Lepski, D.; Nowotny, S.; Leyens, C.; Beyer, E.
Conference Paper
2012Completing digital cultural heritage objects by sketching subdivision surfaces toward restoration planning
Bein, Matthias; Peña Serna, Sebastian; Stork, André; Fellner, Dieter W.
Conference Paper
2012Granular deleting in multi level security models - an electronic engineering approach
Thorleuchter, Dirk; Weck, Gerhard; Poel, Dirk van den
Conference Paper
2012Method for multi-scale modelling and simulation of assembly systems
Neumann, Michael; Constantinescu, Carmen; Westkämper, Engelbert
Conference Paper
2012Model-based development of a safety concept
Adler, Rasmus; Kemmann, Sören; Liggesmeyer, Peter; Schwinn, Jean-Pascal
Conference Paper
2012Modeling support for solid oxide fuel cell-component development
Ganzer, Gregor; Schöne, Jakob; Beckert, Wieland
Poster, Conference Paper
2012Models and methods for the simulation of filter elements
Andrä, Heiko; Iliev, Oleg; Kabel, Matthias; Kirsch, Ralf; Lakdawala, Zahra
Conference Paper
2012Process development for high-solid enzymatic conversion of lignocellulose within a biorefinery
Ludwig, Daniel; Hirth, Thomas; Rupp, Steffen; Zibek, Susanne
Conference Paper
2012Real-time 3D-simulation tool for ultrasonic transducers used in aeroengine component inspections
Spies, Martin; Dillhöfer, Alexander; Rieder, Hans; Dobrovolskij, Dascha
Conference Paper
2012Simulation of submarine gas hydrate deposits as a sustainable energy source and CO2 storage
Janicki, Georg; Hennig, Torsten; Schlüter, Stefan; Deerberg, Görge
Presentation
2012SysML-basierte Anforderungsmodellierung - Model-checking als "Blackbox"
Keuler, Thorsten; Antonino, Pablo
Report
2012Towards a memristor model library in modelica
Majetta, Kristin; Clauß, Christoph; Schmidt, Torsten
Conference Paper
2012Usability based modeling for advanced IT-security - an electronic engineering approach
Thorleuchter, Dirk; Weck, Gerhard; Poel, Dirk van den
Conference Paper
2011An adaptive control model for non-functional feature interactions
Prehofer, Christian
Conference Paper
2011Analytical model for p-n junctions under point source illumination
Blanco-Filgueira, B.; López, P.; Döge, J.
Conference Paper
2011DEM-Modellierung des Verschleißverhaltens von Schneidwerkzeugen
Mölders, Nils; Blömer, Jan; Bertling, J.
Journal Article
2011Designing a multi-purpose capacitive sensing input device
Braun, Andreas; Hamisu, Pascal
Conference Paper
2011Dokumentieren für die Entwicklung und nicht für die Schublade: Pragmatische Nutzung von Software Architekturen
Knodel, Jens
Report
2011A fully-scalable coplanar waveguide passive library for millimeter-wave monolithic integrated circuit design
Diebold, S.; Weber, R.; Seelmann-Eggebert, M.; Massler, H.; Tessmann, A.; Leuther, A.; Kallfass, I.
Conference Paper
2011High granular multi-level-security model for improved usability
Thorleuchter, Dirk; Poel, Dirk van den
Conference Paper
2011Implementation and enhancement of a graphical modelling language for factory engineering and design
Constantinescu, Carmen; Riexinger, Günther
Conference Paper
2011Recent experiences with ultrasonic inspection of baffle former bolts
Debnar, A.; Alaerts, L.; Spies, M.; Minogue, P.; Epineau, C.
Conference Paper
2011Recent experiences with ultrasonic inspection of baffle former bolts
Debnar, A.; Alaerts, L.; Spies, M.; Minogue, P.; Epineau, C.
Conference Paper
2011SysML-basierte Anforderungsmodellierung - Model-checking als "Blackbox"
Keuler, Thorsten; Antonino, Pablo
Conference Paper
2011Thermal modeling of 3D stacks for floorplanning
Reitz, Sven; Heinig, Andy; Martin, Roland; Stolle, Jörn; Wilde, Andreas
Conference Paper
2011Visual semantic analysis to support semi-automatic modeling of semantic service descriptions
Bhatti, Nadeem; Fellner, Dieter W.
Book Article
2010Approach for iterative validation of automotive embedded systems
Weiß, Gereon; Zeller, Marc; Eilers, D.; Knorr, Rudi
Conference Paper
2010A concept for interactive assistant systems for multi-user engineering based on AutomationML
Schleipen, Miriam; Bader, T.
Conference Paper
2010Design methods for 3D IC integration
Schneider, P.; Reitz, S.; Stolle, J.; Martin, R.; Heinig, A.; Wilde, A.
Conference Paper
2010Energy efficiency improvements in compressed air systems: A techno-economic evaluation approach
Hirzel, Simon; Elsland, Rainer; Weißfloch, Ute; Schröter, Marcus; Barth, J.P.
Conference Paper
2010Engineering dynamic adaptation for achieving cost-efficient resilience in software-intensive embedded systems
Adler, Rasmus; Schneider, Daniel; Trapp, Mario
Conference Paper
2010Graphene - mechanical properties and applications
Tonner, Friedemann
Conference Paper
2010Graphene - mechanical properties and applications
Tonner, Friedemann
Conference Paper
2010High-temperature modeling of AlGaN/GaN HEMTs
Vitanov, S.; Palankovski, V.; Maroldt, S.; Quay, R.
Journal Article, Conference Paper
2010Mechatronic simulation of electromechanical servo-presses - examples and challenges
Neugebauer, Reimund; Arnold, B.; Ihlenfeldt, S.; Mauermann, R.; Roth, T.
Presentation
2010Modeling and simulation of burr formation: State-of-the-art and future trends
Leopold, J.; Wohlgemuth, R.
Conference Paper
2010Numerical simulation of the activation behavior of thermal shape memory alloys
Neugebauer, Reimund; Bucht, A.; Pagel, K.; Jung, J.
Conference Paper
2010A reference model for factory engineering and design
Constantinescu, Carmen; Westkämper, Engelbert
Conference Paper
2010Workpiece-centered approach to reconfiguration in manufacturing engineering
Bengel, Matthias
: Verl, Alexander (Hauptberichter)
Dissertation
2009Dynamic model for the efficiency analysis of intralogistic systems
Hoyndorff, K.; Spee, D.; Ten Hompel, M.
Conference Paper
2009Model based virtual startup of automation systems
Schob, U.; Böttcher, R.; Blochwitz, T.; Oelsner, O.; Winter, M.
Conference Paper
2009Modeling of input devices for natural interaction from low-level capacitive proximity sensor data
Braun, Andreas
: Hamisu, Pascal (Supervisor)
Master Thesis
2009RT-Describe
Radermacher, A.; Terrier, F.; Gerard, S.; Weiß, G.; Eilers, D.
Presentation
2008Contact regimes in the wire sawing process: Explicit 3D modeling of PEG/SiC slurry
Bierwisch, C.; Weber, B.; Kübler, R.; Moseler, M.; Kleer, G.
Conference Paper
2008Doctoral Symposium at MODELS 2008
Pretschner, Alexander
Conference Paper
2008Entwurf von SPS-Steuerungen am virtuellen Maschinenprototyp
Blochwitz, T.; Altmann, S.
Journal Article
2008Evaluation of model based specifications integrated into airbus tool and process environment
Hack, Michael
: Rombach, H. Dieter (Supervisor); Muthig, Dirk (Supervisor); Sander, Dietmar (Supervisor)
Thesis
2008Hierarchisierte Modelle in Advanced Planning and Scheduling (APS)
Baumann, M.; Dimitrov, T.
Journal Article
2008KI 2008. Advances in artificial intelligence. 31st Annual German Confernce on AI
: Dengel, A.R.; Berns, K.; Breuel, T.M.; Bomarius, F.; Roth-Berghofer, T.R.
Conference Proceedings
2008Managing losses in through silicon vias with different return current path configurations
Curran, B.; Ndip, I.; Guttovski, S.; Reichl, H.
Conference Paper
2008Modeling a secure computer system. Paper
Thorleuchter, D.
Conference Paper
2008Modeling a secure computer system. Presentation
Thorleuchter, D.
Conference Paper
2008Simulation logistischer Systeme
Kuhn, A.
Book Article
2007Application and validation of the gaussian beam superposition technique to simulate the inspection of aero engine components
Spies, M.; Feist, W.D.
Conference Paper
2007Development of Modeling and Simulation from mid 70th up to now
Leopold, J.
Conference Paper
2007Effect of the cavity resonance-gain offset on the output power characteristics of GaSb-based VECSELs
Schulz, N.; Rattunde, M.; Ritzenthaler, C.; Rösener, B.; Manz, C.; Köhler, K.; Wagner, J.
Journal Article
2007Entwurf von SPS-Steuerungen am virtuellen Maschinenprototyp
Blochwitz, T.; Altmann, S.
Conference Paper
2007Evaluating modeling solutions on their ability to support the partitioning of automotive embedded systems
Kebemou, A.; Schieferdecker, I.
Conference Paper
2007Evaluation of ultrasonic scattering at LCF cracks including optically measured, real roughness profiles
Spies, Martin; Satzger, W.; Bamberg, J.
Conference Paper
2007Fundamental investigation of the "Draw-peeling" process
Kieselstein, J.; Leopold, J.
Conference Paper
2007Mechatronische Modellbildung von Produktionsanlagen
Schob, U.
Book
2007Mesoscopic simulation of photoresist processing in optical lithography
Schnattinger, T.
Dissertation
2007Modell zur Beschreibung von Zeitfaktoren in der automatisierten Stetigfördertechnik
Libert, S.; Ten Hompel, M.; Nettsträter, A.
Conference Paper
2007Modellierung des Verfügbarkeitsverhaltens von Intralogistiksystemen
Jung, E.N.; Follert, G.; Ten Hompel, M.
Conference Paper
2007Selected Readings in Computer Graphics 2006
: Encarnacao, J.L.; Fellner, D.W.; Schaub, J.
Book
2007Selected Readings in Computer Graphics 2006. CD-ROM
: Encarnacao, J.L.; Fellner, D.W.; Schaub, J.
Non Book Material
2007Simulations of the influence of rearrangement during sintering
Henrich, B.; Wonisch, A.; Kraft, T.; Moseler, M.; Riedel, H.
Journal Article
2007Ultrasonic field modeling for immersed components using Gaussian beam superposition
Spies, M.
Journal Article
2007VPS/ESC: Overview of a new module for electrostatic coating
Scheibe, Andreas
Conference Paper
20063D Modelling 2006
: Roth-Koch, Sabine (Technical Committee)
Conference Proceedings
20064D Narbendarstellung des Herzens Visualisierung und Modellierung der Dynamik und Funktion des linken Ventrikels
Nowak, S.
: Wesarg, S. (Prüfer)
Thesis
2006CAE approach to the design of smart structures applications
Auweraer, H. van der; Herold, S.; Mohring, L.; Oliviera, L. de; Silva, M. da; Deraemaeker, A.
Conference Paper
2006A conclusive concept for three-dimensional imaging based on efficient steering and focusing of an ultrasonic 2D-array
Spies, M.; Rieder, H.; Didion, C.; Santraine, B.; Licht, R.; Gebhardt, W.
Conference Paper
2006Design automation for systems on a chip realized in leading edge manufacturing technologies
Elst, G.; Schneider, P.
Conference Paper
2006Flash Annealing Technology for USJ: Modeling and Metrology
Gelpey, J.; McCoy, S.; Camm, D.; Lerch, W.; Paul, S.; Pichler, P.; Borland, J.O.; Timans, P.
Conference Paper
2006Gaussian beam modeling for commercial transducers applied to aero engine disc inspection
Spies, M.
Conference Paper
2006Increased efficiency in the quantitative evaluation of state/event fault trees
Förster, M.; Kaiser, B.
Conference Paper
2006Modeling approaches for active systems
Herold, S.; Atzrodt, H.; Mayer, D.; Thomaier, M.
Conference Paper
2006Modeling the beam fields of circular and rectangular, flat and focused transducers using the gaussian beam superposition technique
Spies, M.
Conference Paper
2006Multi-scale simulations of rearrangement effects and anisotropic behavior during sintering
Wonisch, A.; Kraft, T.; Riedel, H.
Conference Paper
2006Optimization of mirrors for the ultrasonic inspection of complex-shaped components using standard transducers
Spies, M.; Bamberg, J.
Conference Paper
2006Realisierung von Sensor-3D-Umgebungen für den Einsatz in Ambient-Intelligence-Anwendungen
Villette, P.
: Hellenschmidt, M. (Prüfer)
Term paper
2006Research for adaptive assembly
Westkämper, E.
Conference Paper
2006Selected Readings in Computer Graphics 2005. CD-ROM
: Encarnacao, J.L.; Schaub, J.
Non Book Material
2006Verfahren und Anlage zum automatisierten Kommissionieren von in Beuteln verpackten Gütern
Leiking, L.
Conference Paper
2005An application oriented view on materials modeling
Gumbsch, P.
Book Article
2005Combined master and FokkerPlanck equations for the modeling of the kinetics of extended defects in Si
Lampin, E.; Ortiz, C.J.; Cowern, N.E.B.; Colombeau, B.; Cristiano, F.
Journal Article
2005Entwurf sigma-delta-PLL-basierter Frequenzgeneratoren höherer Ordnung für drahtlose digitale Kommunikationssysteme
Christoffers, N.
Dissertation
2005Modeling texture evolution during rolling of magnesium alloy AZ31
Walde, T.; Riedel, H.
Conference Paper, Journal Article
2005Modellierung und Analyse von Angriffen auf Routingverfahren in mobilen Ad-hoc-Netzen
Bucher, T.
: Ebinger, P. (Prüfer)
Thesis
2005Numerical time-domain simulation of wave propagation and scattering in acoustic microscopy for subsurface defect characterization
Schubert, F.; Köhler, B.; Zinin, P.
Conference Paper
2005Prediction of ultrasonic flaw signals and model-to-experiment comparison
Spies, M.
Conference Paper
2005ProSim 05. The 6th International Workshop on Software Process Simulation and Modeling. Proceedings
: Pfahl, D.; Raffo, D.M.; Rus, I.; Wernick, P.
Conference Proceedings
2005Sensor modules for structural health monitoring and reliability of components
Kröning, M.; Berthold, A.; Meyendorf, N.
Conference Paper
20043-D finite element analysis of a SOFC-stack
Beckert, W.; Paepcke, A.; Otschik, P.; Kusnecov, M.
Conference Paper
20043D Modelling 2004
: Roth-Koch, Sabine (Technical Committee)
Conference Proceedings
2004Analytical methods for modeling of ultrasonic nondestructive testing of anisotropic media
Spies, M.
Journal Article
2004Anwendung softwaretechnischer Komponentenkonzepte auf die Produktionsautomatisierung
Klein, M.; Braatz, B.; Ehrig, H.; Schröter, G.; Bengel, M.
Journal Article
2004Calculation of high frequency ultrasonic signals for shear wave insonification in solid material
Schmitz, V.; Langenberg, K.-J.; Chakhlov, S.
Journal Article
2004Development of a hybrid finite element/finite integration model for the UK's national physical laboratory acoustic emission reference facility
Gelat, P.; Theobad, P.; Schubert, F.
Conference Paper
2004Electrical deactivation and diffusion of boron in preamorphized ultrashallow junctions: Interstitial transport and F co-implant control
Colombeau, B.; Smith, A.J.; Cowern, N.E.B.; Lerch, W.; Paul, S.; Pawlak, B.J.; Cristiano, F.; Hebras, X.; Bolze, D.; Ortiz, C.; Pichler, P.
Conference Paper
2004Modeling critical infrastructure requirements
Wolthusen, S.
Conference Paper
2004On the modeling of transient diffusion and activation of boron during post-implantation annealing
Pichler, P.; Ortiz, C.J.; Colombeau, B.; Cowern, N.E.B.; Lampin, E.; Claverie, A.; Cristiano, F.; Lerch, W.; Paul, S.
Conference Paper
2004Selected Readings in Computer Graphics 2003
Schaub, J.; Schönhut, J.
: Encarnacao, J.L.
Book
2004Semantische Konsistenz viewpoint-orientierter Modellierungstechniken am Beispiel der Produktionsautomatisierung
Schröter, G.; Braatz, B.; Ehrig, H.; Klein, M.; Bengel, M.
Journal Article
20033D Modelling 2003 - NUM 3D
: Roth-Koch, S.
Conference Proceedings
2003Analytical beam field modeling applied to transducer optimization and inspection simulation in ultrasonic non-destructive testing
Spies, M.
Journal Article
2003Anpassbare Methodenassistenz in CASE-Werkzeugen
Zettel, J.
Dissertation
2003Approximate model for laser welding
Michel, J.; Pfeiffer, S.; Schulz, W.; Nießen, M.; Kostrykin, V.; Maier, C.
Conference Paper
2003Enzymatische Reaktionen in überkritischen Fluiden
Cinquemani, C.; Ehrenstein, U.; Kabasci, S.; Danzig, J.; Eckstein, M.; Kragl, U.; Jurtzik, J.; Kraska, T.
Conference Paper
2003Modeling for machine tool optimized manufacture
Markworth, L.; Straube, A.; Glasmacher, L.
Conference Paper
2003Modellierung der Mikroverkapselung mit Populationsbilanzen
Blömer, J.; Bertling, J.
Journal Article, Conference Paper
2003Ein modularisiertes Simulationsmodell zur Entscheidungsunterstützung in Software-Entwicklungsprozessen
Neu, H.; Hanne, T.
Report
2003Quasistatic and dynamic properties of 1-3 composites made by soft molding
Gebhardt, S.; Schönecker, A.; Steinhausen, R.; Seifert, W.; Beige, H.
Journal Article
2003Search-based execution-time verification in object-oriented and component-based real-time system development
Groß, H.-G.; Mayer, N.
Conference Paper
2003Semi-analytical wave-field modeling applied to ultrasonic inspection simulation
Spies, M.
Conference Paper
2003Simultaneous five-axis-machining of complex shaped parts
Klocke, F.; Markworth, L.; Glasmacher, L.
Conference Paper
2003Synthetic aperture focusing for defect reconstruction in anisotropic media
Spies, M.; Jager, W.
Journal Article
2003Technology based planning of high performance manufacturing systems
Westkämper, E.; Bischoff, J.; Briel, R. von
Journal Article
2002Biomimetic walking robot SCORPION: Control and modeling
Klaassen, B.; Linnemann, R.; Spenneberg, D.; Kirchner, F.
Journal Article
2002Boosting the application of ultrasonic arrays
Spies, M.; Gebhardt, W.; Rieder, H.
Conference Paper
2002Flexural vibration behavior of piezoelectric heterogeneous bimorph beams
Hirsekorn, S.
Journal Article
2002Modeling of difficult to cut materials
Knodt, S.; Markworth, L.; Reinhardt, M.
Conference Paper
2002Modeling of TiAl6V4 machining operations
Klocke, F.; Markworth, L.; Messner, G.
Conference Paper
2002Modeling transient radiation of ultrasonic transducers in anisotropic materials including wave attenuation
Spies, M.
Conference Paper
2002Multi-scaling modeling and simulation of manufacturing systems
Westkämper, E.; Gottwald, B.; Gerth, C.
Conference Paper
2002Nasal airflow diagnosis. Comparison of experimental studies and computer simulations
Müller-Wittig, W.K.; Mlynski, G.; Weinhold, I.; Bockholt, U.; Voss, G.
Conference Paper
2002Richtlinien - Von Use Cases zu Statecharts in 7 Schritten
Denger, C.; Kerkow, D.; Knethen, A. von; Medina Mora, M.; Paech, B.
Report
2002Simulating a standard type problem of ultrasonic testing - A contribution to the comparison of ultrasonic models
Spies, M.
Conference Paper
2002Tutorial on practical product line scoping and modeling
Schmid, K.; John, I.
Conference Paper
2001Erstellung und Validierung eines mathematischen Modells zur Beschreibung biotechnologischer Prozesse
Bergstedt, U.; Körner, H.-J.; Kabasci, S.; Deerberg, G.
Conference Paper
2001Influences on structure formation at the cutting edge with abrasive waterjets
Henning, A.; Westkämper, E.; Friedrich, R.; Ditzinger, T.; Kübler, T.; Radons, G.
Conference Paper
2001Learning software organizations
Ruhe, G.
Book Article
2001Measurements and scale effects of digitized virtual human head
Prakash, E.C.; Jegathese, R.; Chan, T.K.
Conference Paper
2001Modellierung eines Türsteuergerätes mit SCR. Eine Fallstudie im QUASAR-Projekt
Denger, C.; Doerr, J.; Kamsties, E.
Report
2001Modelling and Optimization of Biological Processes in Stirred Tank Reactors
Bergstedt, U.; Körner, H.-J.; Boltersdorf, U.; Deerberg, G.; Fahlenkamp, H.
Conference Paper
2001Selected Readings in Computer Graphics 2000
: Encarnacao, J.L.
Book
2001Simulation and optimization of biological processes in stirred tank reactors
Bergstedt, U.; Körner, H.-J.; Boltersdorf, U.; Deerberg, G.; Fahlenkamp, H.
Conference Paper
2001System Dynamics as an Enabling Technology for Learning in Software Organisations
Pfahl, D.; Ruhe, G.
Report
2001System Dynamics as an Enabling Technology for Learning in Software Organisations
Pfahl, D.; Ruhe, G.
Conference Paper
2001Technology based planning of high performance manufacturing systems
Westkämper, E.; Bischoff, J.; Briel, R. von
Conference Paper
2001A tool-box approach to the simulation of multi-physics systems
Schwarz, P.
Conference Paper
2001View Planning for Unknown Indoor Scenes Based on a Cost Benefit Analysis
Klein, K.; Sequeira, V.
Conference Paper
2001Visualisierung der Entwicklung der Sahara durch ein Virtual Reality Exponat für eine öffentliche Ausstellung
Guthier, T.
: Fröhlich, T. (Prüfer); Joger, U. (Prüfer); Klees, F. (Prüfer)
Thesis
2000ARCADE/VT - A virtual table-centric modeling system
Stork, A.; Amicis, R. de
Conference Paper
2000Computationally Efficient SH-Wave Modeling in Transversely Isotropic Media
Spies, M.
Journal Article
2000Experiences from DAMACH-HP Project Management: An applied modeling and simulation project for improving harbour processes
Blümel, E.
Conference Paper
2000Industrial application of harbour processes, managing and controlling models and methods in Latvian Ports
Blümel, E.; Novitsky, L.; Tolujev, J.; Merkuryev, Y.
Conference Paper
2000Modeling and simulation of fermentation processes
Bergstedt, U.; Körner, H.-J.; Kabasci, S.; Deerberg, G.
Conference Paper
2000Modellierung und Steuerung von Prozeßketten in segmentierten Unternehmen mittels lernender Strukturen
Westkämper, E.
Conference Paper
2000Modelling and Simulation of Biotechnological Processes: BIOSIM-A Package suitable for Integration in Process Engineering Tools
Bergstedt, U.; Körner, H.-J.; Kabasci, S.; Deerberg, G.
Conference Paper
2000Modelling of Impact Zones at Cutting with Abrasive Waterjets
Henning, A.; Friedrich, R.; Ditzinger, T.; Radons, G.
Conference Paper
2000On void engulfment in shaped sapphire crystals using 3D modelling
Nicoara, I.; Vizman, D.; Friedrich, J.
Journal Article
2000A simplified broad-band large-signal nonquasi-static table-based FET Model
Fernandez-Barciela, M.; Tasker, P.; Campos-Roca, Y.; Demmler, M.; Massler, H.; Sanchez, E.; Curras-Francos, M.C.; Schlechtweg, M.
Journal Article
2000A temperature dependent model for the saturation velocity in semiconductor materials
Quay, R.; Moglestue, C.; Palankovski, V.; Selberherr, S.
Journal Article
1999Analytical, scaleable large signal noise model for GaAs and InP MMIC applications
Reuter, R.; Leven, A.
Conference Paper
1999Auf dem Weg zum Modell. Rechneranwendungen in der Verfahrenstechnik
Deerberg, G.; Schwarze-Benning, K.
Journal Article
1999CEFIT - A Numerical Modeling Tool for Axisymetric Wave Propagation in Cylindrical Media
Schubert, F.; Pfeiffer, A.; Köhler, B.
Conference Paper
1999Current Activities in Ultrasonic NDE Simulations - A German Perspective
Spies, M.
Conference Paper
1999Kompliziertes leicht abgebildet. Simulationswerkzeuge für die Bioverfahrenstechnik
Bergstedt, U.; Körner, H.-J.; Kabasci, S.; Deerberg, G.
Journal Article
1999Modeling in hardware description languages for the simulation of coupled fluidic, thermal and electrical effects
Lüdecke, A.; Trieu, H.-K.; Hoffmann, G.; Weyand, P.; Pelz, G.
Conference Paper
1999Modeling of Graded 1-3 Composite Piezoelectric Transducers
Hirsekorn, S.; Gebhardt, E.; Arnold, W.
Conference Paper
1999Modelling the Factors Driving the Quality of Meetings in the Software Development Process
Briand, L.C.; Kempkens, R.; Lünenbürger, K.; Ochs, M.A.; Verlage, M.
Report
1999Noise, high frequency
Agethen, M.; Reuter, R.; Breder, T.; Bertenburg, R.M.; Brockerhoff, W.; Tegude, F.J.
Book Article
1999Polyhedral Morphing
Alexa, M.
Report
1999Schutzgas-Verpackung für SB-Frischfleisch. Veränderungen der Gasatmosphäre während der Lagerung
Pfeiffer, T.; Menner, M.
Journal Article
1999Texturing 3D Models of Real World Objects from Multiple Unregistered Photographic Views
Neugebauer, P.J.; Klein, K.
Conference Paper
1999Virtual Engineering and Using Virtual Reality for Engineering
Brunetti, G.; Amicis, R. de; Rix, J.
Conference Paper
1998Bedeutung technischer und abfallwirtschaftlicher Planungsgrößen für die Kosten von Rostfeuerungsanlagen
Wolf, C.; Beckmann, R.
Conference Paper
1998Einfluß abfallwirtschaftlicher und technischer Planungsgrößen auf die Anlagenkosten
Beckmann, R.
Conference Paper
1998A flexible impactor optimized for field use (Abstract)
Holländer, W.; Lödding, H.; Dunkhorst, W.
Journal Article
1998High-Resolution Materials Characterization by Conventional and Near-Field Acoustic Microscopy
Hirsekorn, S.; Arnold, W.
Journal Article
1998Measurement of ambient aerosol characteristics for receptor modeling with special emphasis on fine particles (Abstract)
Pohlmann, G.; Koch, W.; Theisen, M.; Nießner, R.
Journal Article
1998A modeling approach to include mechanical microsystem components into the system simulation
Neul, R.; Becker, U.; Lorenz, G.; Schwarz, P.; Haase, J.; Wünsche, S.
Conference Paper
1998Modeling of a combustion engine with hardware description languages
Pelz, G.; Kowalewski, T.; Pohlmann, N.; Zimmer, G.
Conference Paper
1998Non-Destructive Testing and Quality Management
Baumbach, H.; Kraus, S.; Cioclov, D.; Schmitz, V.
Journal Article
1998Simulation based on learning methods
Westkämper, E.; Pirron, J.; Schmidt, T.
Journal Article
1998Simulation Based Production Planning Through Artificial Neural Networks
Westkämper, E.; Pirron, J.; Schmidt, T.
Conference Paper
1998Simulation von Gas-Flüssigkeitsreaktoren mit halbempirischen Modellen
Deerberg, G.; Boltersdorf, U.
Conference Paper
1998Some aspects of thick film resist performance and modeling
Erdmann, A.; Henderson, C.L.; Willson, C.G.; Dammel, R.R.
Conference Paper
1998Towards a Quantification of Damage Risk Caused by Cracks using a Probabilistic Fracture Mechanics Approach Together with new Developements in Quantitative NDT
Schmitz, V.; Cioclov, D.
Journal Article
1998Virtual prototyping for a camera winder: a case study
Pelz, G.; Bielefeld, J.; Zimmer, G.
Conference Paper
1997Adaptive Triangulierung komplexer Oberflächen
Neugebauer, P.J.; Klein, K.
Conference Paper
1997Characterization and modeling of InGaAs/GaAs multi-quantum well lasers by capacitance-voltage measurements
Arias, J.; Esquivias, I.; Bürkner, S.; Chazan, P.; Ralston, J.D.; Larkins, E.C.; Mikulla, M.; Weisser, S.; Rosenzweig, J.
Conference Paper
1997Computer Aided Design and Modeling for Ultrasonic Applications: CADMUS-on-PC
Wüstner, H.; Rieder, H.; Spies, M.; Walte, F.
Conference Paper
1997Einsatz der Generalisierten Punktquellen-Synthese zur Vorbereitung automatischer Ultraschallprüfungen
Hübschen, G.; Spies, M.; Walte, F.
Conference Paper
1997Electro-thermal circuit simulation using simulator coupling
Wünsche, S.; Clauß, C.; Schwarz, P.; Winkler, F.
Journal Article
1997The great dun fell cloud experiment 1993
Choularton, T.W.; Colvile, R.N.; Bower, K.N.; Gallagher, M.W.; Wells, M.; Beswick, K.M.; Arends, B.G.; Möls, J.J.; Kos, G.P.A.; Fuzzi, S.; Lind, J.A.; Orsi, G.; Facchini, M.C.; Laj, P.; Gieray, R.; Wieser, P.; Engelhardt, T.; Berner, A.; Kruisz, C.; Möller, D.; Acker, K.; Wieprecht, W.; Lüttke, J.; Levsen, K.; Bizjak, M.; Hansson, H.-C.; Cederfelt, S.-I.; Frank, G.; Mentes, B.; Martinsson, B.; Orsini, D.; Svenningsson, B.; Swietlicki, E.; Wiedensohler, A.; Noone, K.J.; Pahl, S.; Winkler, P.; Seyffer, E.; Helas, G.; Jaeschke, W.; Georgii, H.W.; Wobrock, W.; Preiss, M.; Maser, R.; Schell, D.; Dollard, G.; Jones, B.; Davies, T.; Sedlak, D.L.; David, M.M.; Wendisch, M.; Cape, J.N.; Hargreaves, K.J.; Sutton, M.A.; Storeton-West, R.L.; Fowler, D.; Hallberg, A.; Harrison, R.M.; Peak, J.D.
Journal Article
1997The importance of natural organic material for environmental processes in waters and soils
Kördel, W.; Dassenakis, M.; Lintelmann, J.; Padberg, S.
Journal Article
1997Integrated modeling for quality management
Mertins, K.; Jochem, R.
Conference Paper
1997Lebendige Virtuelle Welten. Physikalisch-basierte Modelle in Computeranimation und virtueller Realität
Dai, F.
Habilitation
1997Numerical Simulation of 3D SH-Wave Fields Generated in Anisotropic Materials
Batra, N.K.; Simmonds, K.E.; Mignogna, R.B.; Hübschen, G.; Spies, M.
Conference Paper
1997Transducer Beam Field Modeling in Anisotropic Media by Superposition of Gaussian Base Functions
Kröning, M.; Spies, M.
Conference Paper
1996Animation within mobile multimedia on-line services
Belz, C.; Bergold, M.; Häckelmann, H.; Strack, R.
Conference Paper
1996A computationally efficient modeling code for SH-waves in austenitic welds using an explicit space-time green-function
Spies, M.; Kröning, M.
Conference Paper
1996Design and optimization of a multifunctional phased array search unit
Spies, M.; Kröning, M.; Gebhardt, W.; Dalichow, M.H.
Conference Paper
1996Effiziente Skulpturierung von 3D-Modellen aus Tiefenbildern
Neugebauer, P.J.; Schimpf, C.
Conference Paper
1996Generating CAD-models of teeth
Neugebauer, P.J.
Conference Paper
1996The integration of different model types for model-based diagnosis
Brinkop, A.; Kockskämper, S.; Zimmermann-Sturm, M.
Conference Paper
1996A model for liquid phase sintering
Svoboda, J.; Riedel, H.; Gaebel, R.
Journal Article
1996Modeling in standards. Requirements to represent a chemical distributor
Brinkop, A.
Conference Paper
1996Modellbasierte Diagnose von diskreten ereignisorientierten Systemen am Beispiel einer Montageanlage für Greiferbacken
Zimmermann-Sturm, M.
Book
1996Modellieren und Abbilden mit Ultraschall
Langenberg, K.-J.; Klaholz, S.; Marklein, R.; Mayer, K.; Walte, F.; Kostka, J.
Conference Paper
1996Scanning and reconstruction of work pieces from range images
Neugebauer, P.J.
Conference Paper
1996Virtual Cloning - Dokumentation in der Denkmalpflege
Neugebauer, P.J.
Conference Paper
19953D-Modellierung der Abstrahlung, Ausbreitung und Beugung elastischer Wellen mittels generalisierter Punktquellensynthese (GPSS)
Spies, M.; Kröning, M.
Conference Paper
1995Application-directed modeling of radiation and propagation of elastc waves in anisotropic media: GPSS and OPOSSM
Spies, M.; Walte, F.
Conference Paper
1995Elastic wave propagation and scattering in austenitic steel
Walte, F.; Spies, M.; Klaholz, S.; Langenberg, K.-J.
Conference Paper
1995Ein elektrothermisches Heterobipolar-Transistormodell zur Schaltungssimulation
Baureis, P.
Dissertation
1995Ultraschallmodellierung mit dem EFIT-Code zur zerstörungsfreien Prüfung an Beton und isotropen Schweißnähten
Walte, F.; Klaholz, S.; Langenberg, K.-J.; Bärmann, R.; Marklein, R.; Irmer, S.; Müller, H.
Conference Paper
1994Analoge Simulation digitaler Logik
Voigt, B.; Horneber, E.-H.; Augsburger, R.; Neubauer, C.
Journal Article
1994Application of modeling codes to ultrasonic weld inspection
Walte, F.; Spies, M.; Langenberg, K.-J.
Conference Paper
1994Improved passive model for transient prediction of GaAs E/D MESFET analogue switches
Feng, S.; Seitzer, D.
Journal Article
1994Modeling and visualization of ultrasonic testing situations
Schmitz, V.; Kröning, M.; Langenberg, K.-J.
Conference Paper
1994A petri net based modelling technology for manufacturing system engineering
Borusan, A.
Conference Paper
1993Ein funktionales Modellspeichersystem für parallel zu verarbeitende CAD-Objekte
Münke, M.
: Spur, G. (Prüfer)
Dissertation
1993Monolithic high gain DC to 10 GHz direct coupled feedback transimpedance amplifier unsing AlGaAs / GaAs HBTs
Baureis, P.; Göttler, D.; Oehler, F.; Zwicknagel, P.
Conference Paper
1993Product modeling
Krause, F.-L.; Kimura, F.; Kjellberg, T.; Lu, S.C.-Y.; Tipnis, V.A.; Alting, L.; ElMaraghy, H.A.; Eversheim, W.; Weck, M.; Iwata, K.; Suh, N.P.; Wolf, A.C.H. van der
Conference Paper
1993Visualization of flow simulation data in environmental modeling
Jung, V.
Book Article
1992Charakterisierung und Modellierung des Übergangsverhaltens von Analogschaltern mit GaAs-E/D-MESFET
Feng, S.; Sauerer, J.; Hagelauer, R.; Seitzer, D.
Conference Paper
1992Mismatch of current sources and accuracy of D/A converters in 0.5 mu m GaAs/GaAlAs HEMT technology
Feng, S.; Sauerer, J.; Seitzer, D.
Conference Paper
1992Use of KADS-models in BEHAVIOR. Version 1.0
Hemmann, T.; Voß, H.; Niemeyer, H.
Report
1991Integrating simulation and visualization for environmental analysis
Groß, M.; Kühn, V.
Conference Paper
1990Microwave excited excimer laser
Hünermann, L.; Meyer, R.; Schnase, A.; Richter, F.; Wagner, R.
Conference Paper
1990Model based simulation of technical systems with the modeling and simulation tool CAUSA.
Dilger, W.; Möller, J.
Conference Paper
1990Modellierung eines Industrieroboters mit Getriebeelastizitäten
Engell, S.; Wöllhaf, K.
Conference Paper
1990Simulation des Ausbreitungsverhaltens von Flugzeugabgasen
Kühn, V.
Conference Paper
1983Implantation and diffusion models for process simulation
Ryssel, H.; Prinke, G.; Hoffmann, K.
Book Article
1983A multigrid method for simulation of the diffusion equation in VLSI process modeling
Seidl, A.
Journal Article