| | |
|---|
| 2020 | 2D Finite Element Modeling of the Cutting Force in Peripheral Milling of Cellular Metals
Guerra Silva, Rafael; Teicher, Uwe; Brosius, Alexander; Ihlenfeldt, Steffen | Journal Article |
| 2020 | Investigation of the influence of surface waviness of aluminium on the burnishing quality of a combined process
Posdzich, Marco; Stöckmann, Rico; Klimant, Philipp; Putz, Matthias | Journal Article |
| 2019 | Development of a substrate unit for LPBF to increase automatization in manufacturing process chains
Maslo, Semir; Wollbrink, Moritz; Arntz, Kristian; Degen, Florian; Zimmer, Daniel | Conference Paper |
| 2019 | Surface Roughness and its Prediction in High Speed Milling of Aluminum Alloys with PCD and Cemented Carbide Tools
Teicher, Uwe; Hellmich, Arvid; Ihlenfeldt, Steffen; Pirl, Sebastian; Nestler, Andreas | Journal Article |
| 2019 | Thermal errors in milling: Comparison of displacements of the machine tool, tool and workpiece
Putz, Matthias; Regel, Joachim; Wenzel, A.; Bräunig, Michael | Journal Article |
| 2018 | 3D milling edge inspection of CFRP parts by optical methods
Frommknecht, Andreas; Effenberger, Ira | Conference Paper |
| 2018 | Heat accumulation effects during ultrashort pulse laser ablation with spatially shaped beams
Mikhaylov, Dmitriy; Kiedrowski, Thomas; Lasagni, Andrés-Fabián | Journal Article |
| 2018 | An international investigation into AB plasma administration in hospitals: how many AB plasma units were infused?
Zeller, M.P.; Barty, R.; Dunbar, N.M.; Elahie, A.; Flanagan, P.; Garritsen, H.; Kutner, J.M.; Pagano, M.B.; Poglód. R.; Rogers, T.S.; Staves, J.; Wordragen-Vlaswinkel, M. von; Zwaginga, J.J.; Murphy, M.F.; Heddle, N.M.; Yazer, M.H. | Journal Article |
| 2018 | Multi c-BN coatings by r.f diode sputtering and investigation of wear behavior
Park, S.-T.; Han, J.-G.; Keunecke, M. | Journal Article |
| 2018 | Performance of a new piezoceramic thick film sensor for measurement and control of cutting forces during milling
Drossel, Welf-Guntram; Gebhardt, Sylvia; Bucht, André; Kranz, Burkhard; Schneider, Jörg; Ettrichrätz, Martin | Journal Article |
| 2018 | Technology-based assessment of subtractive machining processes for mold manufacture
Klink, Andreas; Arntz, Kristian; Johannsen, Lars; Holsten, Maximilian; Chrubasik, Lothar; Winands, Kai; Wollbrink, Moritz; Bletek, Thomas; Gerretz, Vincent; Bergs, Thomas | Journal Article |
| 2017 | Consistent simulation strategy for heat sources and fluxes in milling
Putz, Matthias; Oppermann, Christian; Semmler, Ulrich; Bräunig, Michael; Karagüzel, Umut | Journal Article |
| 2017 | High-performance machining of fiber-reinforced materials with hybrid ultrasonic-assisted cutting
Stoll, Andrea; Rüger, Carlo; Busch, Katja; Mäder, Thomas; Kranz, Burkhard | Journal Article |
| 2017 | Numerical approach of adaption the cutting path to the thermo-elastic deformation in milling process
Putz, Matthias; Ihlenfeldt, Steffen; Glänzel, Janine; Unger, Roman | Presentation |
| 2017 | Stability of milling with non-uniform pitch and variable helix tools
Otto, Andreas; Rauh, Stefan; Ihlenfeldt, Steffen; Radons, G. | Journal Article |
| 2016 | Residual stress evaluation of a high performance machined pre-formed Ti6Al4V part
Dimitrov, Dimitri; Laubscher, R.F.; Sterzing, Andreas; Conradie, P.J.T.; Oosthuizen, G.; Blau, Peter; Schmidt, Gerhard; Hochmuth, Carsten; Styger, G.; Zachäus, Rene | Journal Article |
| 2016 | Simulation-based correction approach thermo-elastic workpiece deformations during milling processes
Glänzel, Janine; Herzog, Roland; Ihlenfeldt, Steffen; Meyer, Alexander; Unger, Roman | Journal Article |
| 2016 | Tool technologies for milling of hardmetals and ceramics
Bergs, Thomas; Richter, Volkmar; Ottersbach, Michael; Pötschke, Johannes; Hochmuth, Carsten; Busch, Katja | Journal Article |
| 2015 | Automation concepts for tool and die making companies
Klocke, Fritz; Arntz, Kristian; Johannsen, Lars | Conference Paper |
| 2015 | Methodology for analysing hybrid cutting processes with thermal assistance
Putz, Matthias; Tagliaferri, Flaviana; Dix, Martin; Wertheim, Rafael | Journal Article |
| 2014 | Extension of Tlusty's law for the identification of chatter stability lobes in multi-dimensional cutting processes
Otto, A.; Rauh, S.; Kolouch, M.; Radons, G. | Journal Article |
| 2012 | Combining micro-milling and laser structuring for manufacturing complex micro-fluidic structures
Schubert, Andreas; Groß, Stefan; Schulz, Bertram; Eckert, Udo | Journal Article |
| 2012 | Parallel high speed machining with a new additional HSC spindle for machine tools
Harpaz, Oren; Books, Baruch; Schwaar, Michael; Schubert, Andreas; Eckert, Udo | Conference Paper |
| 2011 | Influences on occurrence of magnetism during cutting processes
Bähre, D.; Trapp, K.; Tschuncky, Ralf | Journal Article |
| 2011 | Sequential combination of micro-milling and laser structuring for manufacturing of complex micro-fluidic structures
Schubert, Andreas; Groß, Stefan; Schulz, Bertram; Eckert, Udo | Conference Paper |
| 2010 | Analysis of influences on occurrence of magnetism during cutting processes
Bähre, D.; Becker, D.; Tschuncky, R. | Conference Paper |
| 2010 | Grundlagenuntersuchungen zur effektiven Hochleistungsbearbeitung dünnwandiger Bauteile aus der Titanlegierung TiAl6V4
Busch, K. | Thesis |
| 2010 | Metal matrix composites with CNTs - processing, challenges and possibilities
Addinall, Raphael; Glanz, Carsten; Mahmud, Tanvir; Kolaric, Ivica | Conference Paper |
| 2009 | Impact of milling conditions on the effectiveness of chemical additives in suspension preparation
Meyer, Anja; Nebelung, Manfred; Lenzner, Kerstin; Müller, Martin; Ouyang, Wuye; Potthoff, Annegret | Journal Article |
| 2009 | Innovative Prozesse zur wirtschaftlichen und schädigungsarmen Bearbeitung von Hartmetall
Neugebauer, Reimund; Juhr, H.; Hochmuth, C.; Georgi, R.; Künanz, K.; Schulze, H.-P. | Conference Paper |
| 2009 | Investigations on the adjustment of the modelling section in 2D simulations of milling processes
Uhlmann, E.; Mattes, A.; Graf von der Schulenburg, M.; Gerstenberger, R. | Journal Article |
| 2009 | Machining of high performance workpiece materials with CBN coated cutting tools
Uhlmann, E.; Oyanedel-Fuentes, J.A.; Keunecke, M. | Journal Article |
| 2008 | Processing with parallel kinematics - an experimental analysis
Neugebauer, Reimund; Wabner, M.; Ihlenfeldt, S. | Journal Article |
| 2007 | Development of process chains for micro-fabrication
Schubert, A. | Conference Paper |
| 2007 | Effektive Gussteilbearbeitung durch 3D-Vermessung
Werner, M. | Conference Paper |
| 2006 | Thick c-BN coatings - preparation, properties and application tests
Keunecke, M.; Wiemann, E.; Weigel, K.; Park, S.T.; Bewilogua, K. | Journal Article |
| 2001 | Simultaneous five-axis milling of titanium alloys for turbomachinery components
Klocke, F.; Altmüller, S.; Markworth, L. | Journal Article |
| 1999 | Einsatz von Zyklonsichtern zur Erzeugung definierter Partikelgrößenverteilungen am Beispiel der Pulverlackherstellung
Wadenpohl, C.; Krahnen, J.; Pulli, K.; Strohbeck, U. | Conference Paper |
| 1999 | Green machining of advanced ceramics
Klocke, F.; Gerent, O.; Schippers, C. | Book Article |
| 1998 | High speed cutting dry machining. Revolution or evolution?
Sinhoff, V.; Eisenblätter, G.; Altmüller, S. | Conference Paper |
| 1997 | Integrating microsystems in order to produce intelligent tools
Rübenach, O.; Klocke, F. | Conference Paper |
| 1997 | Möglichkeiten zur Trennung und werkstofflichen Verwertung von Kunststoffverbunden
Pannkoke, K.; Schippmann, D.; Brede, M. | Conference Paper |
| 1995 | Local material removal by focused ion beam milling and etching
Lipp, K.; Frey, L.; Franz, G.; Demm, E.; Petersen, S.; Ryssel, H. | Conference Paper |
| 1993 | Verfahrenstechnische Einflüsse auf Kakaoaroma. Teil I
Ziegleder, G. | Journal Article |
| 1991 | Abtragen mit Laserstrahlung
Wester, R.; Petring, D.; Herziger, G. | Journal Article |
| 1991 | Laserinduziertes Abdampfen als Basisprozeß des Bohrens, Fräsens und Schneidens
Wester, R. | Journal Article |
| 1988 | Production of amorphous Ni-Zr powder by mechanical alloying of pure elements and by milling of intermetallic compounds
Petzoldt, F.; Scholz, B.; Kunze, H.-D. | Journal Article |
| 1988 | Synthesis and process characterization of mechanically alloyed amorphous Ni-Nb powders.
Petzoldt, F. | Journal Article |