| | |
|---|
| 2020 | Alloy design and microstructure evolution in the AlxCoCrFeNi alloy system synthesized by laser metal deposition
Kuczyk, Martin; Kotte, Liliana; Kaspar, Jörg; Zimmermann, Martina; Leyens, Christoph | Journal Article |
| 2020 | Development of an analytical model for optimization of direct laser interference patterning
Voisiat, Bogdan; Aguilar Morales, Alfredo Ismael; Kunze, Tim; Lasagni, Andrés-Fabián | Journal Article |
| 2020 | Hybrid laser arc welding of thick high-strength pipeline steels of grade X120 with adapted heat input
Üstündag, Ömer; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael | Journal Article |
| 2020 | Investigation on the formation of grain boundary serrations in additively manufactured superalloy Haynes 230
Haack, Maximilian; Kuczyk, Martin; Seidel, André; Lopez, Elena; Brückner, Frank; Leyens, Christoph | Journal Article |
| 2020 | Laser Metal Deposition of Ti6Al4V-A Brief Review
Zhong, Chongliang; Liu, Jianing; Zhao, Tong; Schopphoven, Thomas; Fu, Jinbao; Gasser, Andres; Schleifenbaum, Johannes Henrich | Journal Article |
| 2020 | Microstructure and sliding wear resistance of plasma sprayed Al2O3-Cr2O3-TiO2 ternary coatings from blends of single oxides
Grimm, Maximilian; Conze, Susan; Berger, Lutz-Michael; Paczkowski, Gerd; Lindner, Thomas; Lampke, Thomas | Journal Article |
| 2020 | On the Characterization and Modeling of Interfaces in Fiber Reinforced Polymer Structures
Schober, Michael
: Gumbsch, P.; Hohe, J.; Kuboki, T. | Dissertation |
| 2020 | Poly(ester amide)s from poly(alkylene succinate)s and rapid crystallizing amido diols
Kluge, Marcel; Rennhofer, Harald; Lichtenegger, Helga C.; Liebner, Falk W.; Robert, Tobias | Journal Article |
| 2020 | A study on the microstructural characterization and phase compositions of thermally sprayed Al2O3-TiO2 coatings obtained from powders and water-based suspensions
Michalak, Monika; Toma, Filofteia-Laura; Latka, Leszek; Sokolowski, Pawel; Barbosa, Maria Manuel; Ambroziak, Andrzej | Journal Article |
| 2020 | Systematic investigation about the influence of two-step sintering on microstructure properties of ZTA ceramics
Tschirpke, Caroline; Reichel, Uwe; Begand, Sabine; Simon, Kerstin | Journal Article |
| 2020 | Thermal Annealing and Laser Treatment of Sol-gel Derived Zirconia Thin Films
Jahn, Rainer; Steenhusen, Sönke; Löbmann, Peer | Journal Article |
| 2019 | Application of empirical hardness models on hardmetals with alternative binders
Vornberger, Anne; Pötschke, Johannes; Mayer, Markus; Michaelis, Alexander | Conference Paper |
| 2019 | Application of the Hybrid Process Ultrasound Enhanced Friction Stir Welding on Dissimilar Aluminum/Dual-Phase Steel- and Aluminum/Magnesium Joints
Thomä, Marco; Gester, Andreas; Wagner, Guntram; Straß, Benjamin; Wolter, Bernd; Benfer, Sigrid; Gowda, Darshan Kare; Fürbeth, Wolfram | Journal Article |
| 2019 | Characterisation of Additively Manufactured Metallic Stents
Langi, Enzoh; Bisht, Anuj; Silberschmidt, Vadim V.; Ruiz, Pablo D.; Vogt, Felix; Mailto, Lukas; Masseling, Lukas; Zhao, Liguo | Journal Article, Conference Paper |
| 2019 | Dissimilar laser beam welding of press hardened stainless martensitic steels and a cold worked stainless TWIP steel
Dahmen, Martin; Deniz, Berkan; Lindner, Stefan; Petring, Dirk | Conference Paper |
| 2019 | Extreme High-Speed Laser Material Deposition (EHLA) of AISI 4340 Steel
Li, Tianci; Zhang, Lele; Bultel, Gregor Gille Pierre; Schopphoven, Thomas; Gasser, Andres; Schleifenbaum, Johannes Henrich; Poprawe, Reinhart | Journal Article |
| 2019 | Finite element simulations on the relation of microstructural characteristics and the formation of different types of adiabatic shear bands in a β-titanium alloy
Winter, Sven; Pfeiffer, Steffen; Bergelt, Tim; Wagner, Martin Franz-Xaver | Conference Paper |
| 2019 | High-Pressure Sintering of Rhombohedral Cr2S3 Using Titanium-Zirconium-Molybdenum Tools
Groeneveld, Dennis; Groß, Hendrik; Hansen, Anna-Lena; Dankwort, Torben; Hansen, Julian; Wöllenstein, Jürgen; Bensch, Wolfgang; Kienle, Lorenz; König, Jan D. | Journal Article |
| 2019 | Hybrid laser arc welding of thick plates X8Ni9 for LNG tank construction
Gook, Sergej; El-Batahgy, A-M.; Gumenyuk, Andrey; Rethmeier, Michael | Conference Paper |
| 2019 | Increasing heat transfer of metals through periodical microstructures using Direct Laser Interference Patterning
Alamri, Sabri; Schell, Frederic; Steege, Tobias; Lasagni, Andrés-Fabián; Kunze, Tim | Conference Paper |
| 2019 | Influence of rolling texture on near-threshold crack extension behavior in aluminum alloy EN AW-6082
Wicke, Marcel; Brückner-Foit, Angelika; Kirsten, Tina; Zimmermann, Martina; Bülbül, Fatih; Christ, Hans-Jürgen | Journal Article |
| 2019 | Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance
Gu, Dongdong; Zhang, Hongmei; Dai, Donghua; Xia, Mujian; Hong, Chen; Poprawe, Reinhart | Journal Article |
| 2019 | LLZO separator sheets manufactured by a tape casting process and their electrochemical characterization
Hüttl, Juliane; Arnold, Michael; Nikolowski, Kristian; Görne, Arno Ludwig; Wolter, Mareike; Michaelis, Alexander | Poster |
| 2019 | Mechanical microstructure characterization of discontinuous-fiber reinforced composites by means of experimental-numerical micro tensile tests
Schober, M.; Dittman, K.; Gumbsch, P.; Kuboki, T.; Hohe, J. | Conference Paper, Journal Article |
| 2019 | Microstructural Evolution and Microhardness of Direct Laser Clad TiC Dispersed Titanium Aluminide (Ti45Al5Nb0.5Si) Alloy
Majumdar, Jyotsna Dutta; Rittinghaus, Silja-Katharina; Wissenbach, Konrad; Höche, Daniel; Blawert, Carsten; Weisheit, Andreas | Journal Article, Conference Paper |
| 2019 | Optimization of magneto-mechanical properties to increase the efficiency of actuator elements
Böhm, Andrea; Panesso, Miguel; Pagel, Kenny; Drossel, Welf-Guntram | Conference Paper |
| 2019 | Oxygen gain and aluminum loss during laser metal deposition of intermetallic TiAl
Rittinghaus, Silja-Katharina; Molina Ramirez, Veronica Rocio; Zielinski, Jonas; Hecht, Ulrike | Journal Article |
| 2019 | Passivation and Microstructure of Dual Intrinsic a-Si:H Layers for SHJ Solar Cells
Temmler, J.; Bodlak, L.; Moldovan, A.; Bivour, M.; Wolf, A.; Rentsch, J. | Conference Paper |
| 2019 | Picosecond laser interference patterning of periodical micro-architectures on metallic molds for hot embossing
Fu, Yangxi; Soldera, Marcos; Wang, Wei; Voisiat, Bogdan; Lasagni, Andrés-Fabián | Journal Article |
| 2019 | Powder based and suspension based additive manufacturing of hardmetal
Berger, Christian; Pötschke, Johannes; Abel, Johannes; Richter, Hans-Jürgen; Scheithauer, Uwe; Weingarten, Steven; Moritz, Tassilo; Michaelis, Alexander | Journal Article |
| 2019 | Replicative manufacturing of glass optics with functional microstructures
Rojacher, Cornelia; Grunwald, Tim; Bergs, Thomas | Conference Paper |
| 2019 | Solids under extreme shear: Friction-mediated subsurface structural transformations
Greiner, C.; Gagel, J.; Gumbsch, P. | Journal Article |
| 2018 | 30 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered TiN-SiOx thin film
Keckes, Jozef; Daniel, Rostislav; Todt, Juraj; Zalesak, Jakub; Sartory, Bernhard; Braun, Stefan; Gluch, Jürgen; Rosenthal, Martin; Burghammer, Manfred; Mitterer, C.; Niese, S.; Kubec, Adam | Journal Article |
| 2018 | Comparison between GTA and laser beam welding of 9% Ni steel for critical cryogenic applications
El-Batahgy, A-M.; Gumenyuk, A.; Gook, S.; Rethmeier, M. | Journal Article |
| 2018 | Comparison of long-term radii evolution of the S-phase in aluminum alloy 2618A during ageing and creep
Rockenhäuser, C.; Schriever, S.; Hartrott, P. von; Piesker, B.; Skrotzki, B. | Journal Article |
| 2018 | Computational assessment of the microstructure-dependent plasticity of lamellar gray cast iron - Part IV: Assessment of the yield surface after plastic loading
Metzger, M.; Seifert, T. | Journal Article |
| 2018 | Corrosion resistance of silicon-infiltrated silicon carbide (SiSiC)
Striegler, Maria; Matthey, Björn; Mühle, Uwe; Michaelis, Alexander; Herrmann, Mathias | Journal Article |
| 2018 | Effect of laser-beam and hybrid-laser-arc welding parameters and filler metal on microstructure and mechanical properties of thick heat-treated steel X8Ni9+QT640 for cryogenic service
El-Batahgy, A-M.; Gook, S.; Gumenyuk, A.; Rethmeier, M. | Conference Paper |
| 2018 | Improvement of the electrical conductivity between electrode and sheet in spot welding process by direct laser interference patterning
Heilmann, Stefan; Zwahr, Christoph; Knape, Alexander; Zschetzsche, Jörg; Lasagni, Andrés-Fabián; Füssel, Uwe | Journal Article |
| 2018 | In-situ xrd-investigation of electrolytic copper layer
Schneider, Michael; Weiser, Mathias; Matthey, Björn; Herrmann, Mathias | Journal Article |
| 2018 | Influence of feedstock powder modification by heat treatments on the properties of APS-sprayed Al2O3-40%TiO2 coatings
Berger, Lutz-Michael; Sempf, Kerstin; Sohn, Yoo Jung; Vaßen, Robert | Journal Article |
| 2018 | Influence of heat input and preheating on the cooling rate, microstructure and mechanical properties at the hybrid laser-arc welding of API 5L X80 steel
Turichin, G.; Kuznetsov, M.; Pozdnyakov, A.; Gook, S.; Gumenyuk, A.; Rethmeier, M. | Journal Article, Conference Paper |
| 2018 | Influence of surface state on properties of Ni-Mn-Ga actuator elements
Böhm, Andrea; Schneider, Jörg; Drossel, Welf-Guntram; Pagounis, Emmanouel; Laufenberg, Markus | Conference Paper |
| 2018 | Influence of the oxygen flow rate on gas flow sputtered thermal barrier coatings
Rösemann, N.; Ortner, K.; Bäker, M.; Petersen, J.; Bräuer, G.; Rösler, J. | Journal Article |
| 2018 | Micro‐electrochemical investigation of the passive behavior of thin anodic titanium oxide films on TiAlV6‐4
Langklotz, Ulrike; Noeske, Michael; Schneider, Michael | Journal Article |
| 2018 | Micromechanical investigation and numerical simulation of fatigue crack formation in welded joints
Beckmann, C.; Kennerknecht, T.; Preußner, J.; Farajian, M.; Luke, M.; Hohe, J. | Journal Article |
| 2018 | Microstructural investigations of polycrystalline Ti2AlN prepared by physical vapor deposition of Ti-AlN multilayers
Gröner, Lukas; Kirste, Lutz; Oeser, Sabine; Fromm, Alexander; Wirth, Marco; Meyer, Frank; Burmeister, Frank; Eberl, Chris | Journal Article |
| 2018 | On the stability of c-BN-reinforcing particles in ceramic matrix materials
Wolfrum, Anne-Kathrin; Matthey, Björn; Michaelis, Alexander; Herrmann, Mathias | Journal Article |
| 2018 | The origin of surface microstructure evolution in sliding friction
Greiner, C.; Liu, Z.; Schneider, R.; Pastewka, L.; Gumbsch, P. | Journal Article |
| 2018 | A thermodynamically consistent model for elastoplasticity, recovery, recrystallization and grain coarsening
Kertsch, L.; Helm, D. | Journal Article |
| 2017 | Characteristics of mechanical metamaterials based on buckling elements
Findeisen, C.; Hohe, J.; Kadic, M.; Gumbsch, P. | Journal Article |
| 2017 | Corrosion stability of Sialon-based materials in acids and basic solutions
Nickol, Alexander; Wolfrum, Anne-Kathrin; Kunz, Willy; Michaelis, Alexander; Herrmann, Mathias | Journal Article |
| 2017 | Evaluation of soft chemistry methods to synthesize Gd-doped CaMnO3-δ with improved thermoelectric properties
Löhnert, Romy; Stelter, Michael; Töpfer, Jörg | Journal Article |
| 2017 | Influence of post-treatment on the microstructural and tribomechanical properties of suspension thermally sprayed WC-12 wt%Co nanocomposite coatings
Ali, O.; Ahmed, R.; Faisal, N.H.; Alazani, N.M.; Berger, Lutz-Michael; Kaiser, Arno; Toma, Filofteia-Laura; Polychroniadis, E.K.; Sall, M.; Elakwah, Y.O.; Goosen, M.F.A. | Journal Article |
| 2017 | Influence of substrate temperature on morphology and behavior under cyclic thermal load of gas flow sputtered zirconia coatings
Rösemann, N.; Ortner, K.; Petersen, J.; Stöwer, M.; Bäker, M.; Bräuer, G.; Rösler, J. | Journal Article |
| 2017 | Microstructural investigation of diamond-SiC composites produced by pressureless silicon infiltration
Matthey, Björn; Höhn, Sören; Wolfrum, Anne-Kathrin; Mühle, Uwe; Motylenko, Mykhaylo; Rafaja, David; Michaelis, Alexander; Herrmann, Mathias | Journal Article |
| 2017 | Microstructure of gas flow sputtered thermal barrier coatings
Rösemann, N.; Ortner, K.; Petersen, J.; Bäker, M.; Bräuer, G.; Rösler, J. | Journal Article |
| 2017 | Modelling of Ultrasonic Scattering in Polycrystals Aiming for Tools to Simulate Experiments in NDT&E
Hirsekorn, Sigrun; Dobrovolskij, Dascha; Spies, Martin | Conference Paper |
| 2017 | SiC-bonded diamond materials produced by pressureless silicon infiltration
Matthey, Björn; Herrmann, Mathias; Hörner, Martin; Geldern, Maike van; Kunze, Steffen; Blug, Bernhard; Michaelis, Alexander | Journal Article |
| 2017 | Thermodynamically consistent modelling of recrystallization and grain coarsening in precipitation‐hardened alloys
Kertsch, C.; Helm, D. | Journal Article, Conference Paper |
| 2017 | Wire-based laser metal deposition for additive manufacturing of TiAl6V4: Basic investigations of microstructure and mechanical properties from build-up parts
Klocke, Fritz; Arntz, Kristian; Klingbeil, Nils; Schulz, Martin | Conference Paper |
| 2016 | Computational assessment of the microstructure-dependent plasticity of lamellar gray cast iron - Part III: A new yield function derived from microstructure-based models
Metzger, M.; Seifert, T. | Journal Article |
| 2016 | Determination of local resistivity in ceramic composites by electron microscopy
Sempf, Kerstin; Boese, Markus; Gnauck, Peter; Höhn, Sören; Herrmann, Mathias | Journal Article |
| 2016 | Effect of a deep cryogenic treatment on wear and microstructure of a 6101 aluminum alloy
Steier, V.F.; Ashiuchi, E.S.; Reißig, L.; Araújo, J.A. | Journal Article |
| 2016 | Effects of spark plasma sintering conditions on the anisotropic thermoelectric properties of bismuth antimony telluride
Han, Li; Spangsdorf, S.H.; Nong, Ngovan; Hung, Le Thanh; Zhang, Y.B.; Pham, H.N.; Chen, Yu; Roch, Aljoscha; Stepien, Lukas; Pryds, Nini H. | Journal Article |
| 2016 | Electromagnetic techniques for materials characterization
Altpeter, Iris; Tschuncky, Ralf; Szielasko, Klaus | Book Article |
| 2016 | Formation of secondary borides in liquid phase-sintered B6O materials
Thiele, Maik; Herrmann, Mathias; Müller, Christin; Michaelis, Alexander | Journal Article |
| 2016 | Influence of Microstructures on Tribological Systems - Development of Process and Surface Structure
Regel, Gerhard; Putz, Matthias; Blau, Peter; Hochmuth, Carsten; Frieß, Uwe; Fiedler, Maik | Journal Article, Conference Paper |
| 2016 | The influence of the initial near-surface microstructure and imposed stress level on the running-in characteristics of lubricated steel contacts
Brink, A.; Lichtenberg, K.; Scherge, M. | Journal Article |
| 2016 | Laser microstructured metal thin films as promising alternative for indium based transparent electrodes
Eckhardt, Sebastian; Siebold, Mathias; Lasagni, Andrés-Fabián | Journal Article |
| 2016 | Low heat input gas metal arc welding for dissimilar metal weld overlays part I: The heat-affected zone
Frei, Julian; Alexandrov, Boian T.; Rethmeier, Michael | Journal Article |
| 2016 | Microstructure and mechanical properties of Ti-15Zr alloy used as dental implant material
Medvedev, A.E.; Molotnikov, A.; Lapovok, R.; Zeller, R.; Berner, S.; Habersetzer, P.; Dalla Torre, F. | Journal Article |
| 2016 | Modelling grain growth in the framework of Rational Extended Thermodynamics
Kertsch, L.; Helm, D. | Journal Article |
| 2016 | Optimization of cutting processes for magnetic shape memory actuator elements
Böhm, Andrea; Schneider, Jörg; Drossel, Welf-Guntram; Pagounis, E.; Laufenberg, M. | Conference Paper |
| 2015 | Computational assessment of the microstructure-dependent plasticity of lamellar gray cast iron - Part I: Methods and microstructure-based models
Metzger, M.; Seifert, T. | Journal Article |
| 2015 | Computational assessment of the microstructure-dependent plasticity of lamellar gray cast iron - Part II: Initial yield surfaces and directions
Metzger, M.; Seifert, T. | Journal Article |
| 2015 | Electrochemical corrosion of silicon-infiltrated silicon carbide ceramics in aqueous solutions
Herrmann, Mathias; Sempf, Kerstin; Kremmer, Kerstin; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2015 | Geometric control of cell alignment and spreading within the confinement of antiadhesive poly(ethylene glycol) microstructures on laser-patterned surfaces
Strehmel, Christine; Perez-Hernandez, Heidi R.; Zhang, Zhenfang; Löbus, Axel; Lasagni, Andrés-Fabián; Lensen, Marga C. | Journal Article |
| 2015 | Influence of bias voltage and oxygen flow rate on morphology and crystallographic properties of gas flow sputtered zirconia coatings
Rösemann, N.; Ortner, K.; Petersen, J.; Schadow, T.; Bäker, M.; Bräuer, G.; Rösler, J. | Journal Article |
| 2015 | Influence of different sintering techniques on microstructure and phase composition of oxygen-transporting ceramic
Ravkina, Olga; Räthel, Jan; Feldhoff, Armin | Journal Article |
| 2015 | Influences on the thermomechanical fatigue crack growth of the nickel alloy 617
Schlesinger, M.; Schweizer, C.; Brontfeyn, Y. | Journal Article |
| 2015 | Investigation on joint characteristics of laser beam welded press hardenable ultra-high strength steels with ferritic-martensitic and martensitic microstructure
Janzen, V.; Meschut, G.; Dahmen, M.; Poprawe, R.; Lindner, S.; Wagener, Rainer; Melz, Tobias | Journal Article |
| 2015 | Laser and hybrid laser-arc welding of cryogenic 9%Ni steel for construction of LNG storage tanks
Gook, Sergej; Forquer, Matthew; Gumenyuk, Andrey; Rethmeier, Michael; El-Batahgy, Abdel-Monem | Conference Paper |
| 2015 | Modeling of uncertainties in long fiber reinforced thermoplastics
Hohe, J.; Beckmann, C.; Paul, H. | Journal Article |
| 2015 | Novel sheet metal parts with sensor and actuator mode of operation
Drossel, Welf-Guntram; Schubert, Andreas; Nestler, Matthias; Hensel, Sebastian; Müller, Roland; Müller, Michael; Müller, Benedikt; Jahn, Stephan | Conference Paper |
| 2015 | Simulation of osmotic and reactive effects in membranes with resolved microstructure
Calo, Victor M.; Nicolò, E. di; Iliev, Oleg; Lakdawala, Zahra; Leonhard, Katherine H.L.; Printsypar, Galina | Conference Paper |
| 2014 | Advances in Barkhausen noise analysis
Meyendorf, Norbert; Hillmann, Susanne; Cikalova, Ulana; Schreiber, Jürgen | Conference Paper |
| 2014 | Analysis of microstructural changes during high temperature exposure by means of non-destructive micro-magnetic methods
Rabung, Madalina; Kuhn, Bernd | Conference Paper |
| 2014 | Deformation behaviour of TWIP-Steels: From experiments to constitutive modelling and simulations
Butz, A.; Zapara, M.; Erhart, A.; Croizet, D.; Stenberg, N.; Hagstrom, J.; Helm, D.; Schneider, M.; Kampczyk, M.; Haufe, A.; Biasutti, M. | Conference Paper |
| 2014 | Determination of the easy axes of small ferromagnetic precipitates in a bulk material by combined magnetic force microscopy and electron backscatter diffraction techniques
Batista, Leonardo; Rabe, Ute; Hirsekorn, Sigrun | Journal Article |
| 2014 | Electrochemical corrosion of silicon carbide ceramics in H2SO4
Herrmann, M.; Sempf, K.; Schneider, M.; Sydow, U.; Kremmer, K.; Michaelis, A. | Journal Article |
| 2014 | Enhanced oxidation resistance of ZrB2/SiC composite through in situ reaction of gadolinium oxide in patterned surface cavities
Gonzalez-Julian, Jesus; Cedillos-Barraza, Omar; Döring, Sven; Nolte, Stefan; Guillon, Olivier; Lee, William E. | Journal Article |
| 2014 | Ex-service analysis of membrane tubes after the operation in a demonstrator unit
Rutkowski, B.; Kriegel, Ralf; Malzbender, Jürgen | Journal Article |
| 2014 | Influence of the microstructure on the corrosion resistance of plasma-nitrided austenitic stainless steel 304L and 316L
Biehler, J.; Hoche, H.; Oechsner, M.; Kaestner, P.; Bunk, K.; Bräuer, G. | Journal Article |
| 2014 | Microcladding of hypereutectic Al-Si alloys: technological aspects and structure features
Grigoriev, Sergej Nikolaevich; Tarasova, Tatyana Vasilievna; Gvozdeva, Galina Olegovna; Nowotny, Steffen | Journal Article |
| 2014 | Microstructure and residual stresses of laser structured surfaces
Preußner, J.; Oeser, S.; Pfeiffer, W.; Temmler, A.; Willenborg, E. | Conference Paper |
| 2014 | Origins of folding instabilities on polycrystalline metal surfaces
Beckmann, N.; Romero, P.A.; Linsler, D.; Dienwiebel, M.; Stolz, U.; Moseler, M.; Gumbsch, P. | Journal Article |
| 2014 | Synthesis of biodiesel in microstructured reactors under supercritical reaction conditions
Schürer, Jochen; Thiele, Richard; Wiborg, Jens Ole; Ziogas, Athanassios; Kolb, Gunther | Conference Paper |
| 2014 | Theoretical description of ultrasonic propagation and scattering phenomena in polycrystalline structures aiming for simulations on nondestructive materials characterization
Hirsekorn, Sigrun | Conference Paper |
| 2013 | Characterization of the magnetic micro- and nanostructure in unalloyed steels by magnetic force microscopy
Batista, Leonardo; Rabe, Ute; Hirsekorn, Sigrun | Conference Paper |
| 2013 | Correlation between microstructure and electrical resistivity of hexagonal boron nitride ceramics
Steinborn, C.; Herrmann, M.; Keitel, U.; Schönecker, A.; Räthel, J.; Rafaja, D.; Eichler, J. | Journal Article |
| 2013 | Direct laser interference patterning of planar and non-planar steels and their microstructural characterization
Bieda, M.; Schmädicke, C.M.; Wetzig, A.; Lasagni, A. | Journal Article |
| 2013 | Induction-assisted laser beam welding of a thermomechanically rolled HSLA S500MC steel: A microstructure and residual stress assessment
Coelho, R.S.; Corpas, M.; Moreto, J.A.; Jahn, A.; Standfuß, J.; Kaysser-Pyzalla, A.; Pinto, H. | Journal Article |
| 2013 | Influence of pressure-assisted polymerization on the microstructure and strength of polymer-infiltrated ceramics
Steier, V.F.; Koplin, C.; Kailer, A. | Journal Article |
| 2013 | Investigation of binderless WC-TiC-Cr3C2 hard materials prepared by spark plasma sintering (SPS)
Qiao, Z.; Räthel, J.; Berger, L.-M.; Herrmann, M. | Journal Article |
| 2013 | Magnetic micro- and nanostructures of unalloyed steels: Domain wall interactions with cementite precipitates observed by MFM
Batista, Leonardo; Rabe, Ute; Hirsekorn, Sigrun | Journal Article |
| 2013 | MALDI-TOF-CID for the microstructure elucidation of polymeric hydrolysable tannins
Radebe, Nonhlanhla; Rode, Karsten; Pizzi, A.; Giovando, S.; Pasch, Harald | Journal Article |
| 2013 | Microstructure-permeability relation of porous beta-Si3N4 ceramics
Topates, G.; Mammitzsch, L.; Petasch, U.; Adler, J.; Kara, F.; Mandal, H. | Journal Article |
| 2012 | Atomic force microscopy - what is it all about, and what does it tell us about the microstructure of metals?
Hirsekorn, Sigrun | Conference Paper |
| 2012 | Comparison of the microstructural characteristics and electrical properties of thermally sprayed Al2O3 coatings from aqueous suspensions and feedstock powders
Toma, F.-L.; Berger, L.-M.; Scheitz, S.; Langner, S.; Rödel, C.; Potthoff, A.; Sauchuk, V.; Kusnezoff, M. | Journal Article |
| 2012 | Determination of friction behavior in extrusion processes with a new experimental method
Sun, D.-Z.; Kailer, A.; Andrieux, F.; Ockewitz, A. | Conference Paper |
| 2012 | Electrical resistivity of silicon nitride-silicon carbide based ternary composites
Zschippang, E.; Klemm, H.; Herrmann, M.; Sempf, K.; Guth, U.; Michaelis, A. | Journal Article |
| 2012 | Formation of Ti2AlN phase after post-heat treatment of Ti-Al-N films deposited by pulsed magnetron sputtering
Yang, Y.; Keunecke, M.; Stein, C.; Gao, L.-J.; Jiang, X.; Bewilogua, K.; Sun, C. | Journal Article |
| 2012 | Interface orientation distribution during grain growth in bulk SrTiO3 measured by means of 3D X-ray diffraction contrast tomography
Syha, M.; Rheinheimer, W.; Bäurer, M.; Lauridsen, E.M.; Ludwig, W.; Weygand, D.; Gumbsch, P. | Conference Paper |
| 2012 | Kinetics of rare earth incorporation and its role in densification and microstructure formation of alpha-Sialon
Herrmann, M.; Höhn, S.; Bales, A. | Conference Paper, Journal Article |
| 2012 | Microstructure and mechanical properties of melt-spun aluminium alloys consolidated by spark plasma sintering and forging
Schubert, Thomas; Lorenz, Bernd; Steger, Jürgen; Weißgärber, Thomas; Neugebauer, Reimund; Kieback, Bernd | Conference Paper |
| 2012 | Microstructures of Erbium modified aluminum-copper alloys
Berghof-Hasselbächer, E.; Masset, P.J.; Zhang, L. | Journal Article |
| 2012 | Numerical and experimental design of graded cellular sandwich cores for multi-functional aerospace applications
Hohe, J.; Hardenacke, V.; Fascio, V.; Girard, Y.; Baumeister, J.; Stöbener, K.; Weise, J.; Lehmhus, D.; Pattofatto, S.; Zeng, H.; Zhao, H.; Calbucci, V.; Rustichelli, F.; Fiori, F. | Journal Article |
| 2012 | Room-temperature MBE deposition, thermoelectric properties, and advanced structural characterization of binary Bi2Te3 and Sb2Te3 thin films
Peranio, N.; Winkler, M.; Bessas, D.; Aabdin, Z.; König, J.; Böttner, H.; Hermann, R.P.; Eibl, O. | Journal Article |
| 2012 | Texture evolution of HPT-processed Ni 50Mn 29Ga 21
Chulist, Robert; Böhm, Andrea; Rybacki, E.; Lippmann, T.; Oertel, C.-G.; Skrotzki, Werner | Conference Paper |
| 2012 | Three-dimensional grain structure of sintered bulk strontium titanate from X-ray diffraction contrast tomography
Syha, M.; Rheinheimer, W.; Bäurer, M.; Lauridsen, E.M.; Ludwig, W.; Weygand, D.; Gumbsch, P. | Journal Article |
| 2011 | Influence of the steel alloy composition on phase transitions and its applicability to hot forming process
Neugebauer, Reimund; Göschel, A.; Rautenstrauch, A.; Meza-Garcia, E. | Conference Paper |
| 2011 | Interaction of boron suboxide with compacted graphite cast iron. Short communication
Freemantle, C.S.; Johnson, O.T.; Sigalas, I.; Herrmann, M. | Journal Article |
| 2011 | Microstructural investigation of thermally sprayed ceramic coatings by laser acoustic surface waves
Barbosa, M.; Schneider, D.; Puschmann, R.; Toma, F.-L.; Berger, L.-M. | Conference Paper |
| 2011 | Microstructure based fatigue analysis of cast components under variable amplitude loading
Eufinger, Jens; Heinrietz, Andre; Bruder, Thomas; Hanselka, Holger | Conference Paper |
| 2011 | Microstructure characterization and imaging of fine-grainded steel by microscopic ultrasonic techniques
Hirsekorn, Sigrun; Rabe, Ute; Batista, Leonardo; Behl, L. | Conference Paper |
| 2011 | Numerical homogenisation of an elasto-plastic model-material with large elastic strains: Macroscopic yield surfaces and the Eulerian normality rule
Schmidt, I. | Journal Article |
| 2011 | Spark plasma sintering of TiCN nanopowders in non-linear heating and loading regimes
Zgalat-Lozynskyy, O.; Herrmann, M.; Ragulya, A. | Journal Article |
| 2010 | Microstructure and texture in Ni50Mn29Ga21 deformed by high-pressure torsion
Chulist, R.; Skrotzki, W.; Oertel, C.-G.; Böhm, A.; Lippmann, T.; Rybacki, E. | Journal Article |
| 2010 | Sintering and mechanical properties of AlMgB14 composite materials
Herrmann, Mathias; Bodkin, R.; Coville, N.J.; Sigalas, I.; Thiele, M. | Journal Article |
| 2010 | Strategies for numerical prediction of the uncertainty in the material response of solid foams
Hohe, J.; Beckmann, C.; Hardenacke, V. | Abstract |
| 2010 | Strukturierung polymerer Oberflächen nach biologischem Vorbild
Jendrich, M.
: Krauß, H.; Mölders, N. | Thesis |
| 2009 | Characterization of reactive nano scale multilayer foils for microsystem applications
Boettge, B.; Teuscher, N.; Schischka, J.; Krause, M.; Richter, S.; Heilmann, A.; Petzold, M.; Bagdahn, J. | Conference Paper |
| 2009 | Identifikation schichtbestimmender Prozesskenngrößen bei der Verbundbildung in Aluminium-Magnesiumproben
Kunce, S. | Thesis |
| 2009 | Makyoh-Imaging zur Charakterisierung reflektierender Oberflächen
Finck, A. von; Duparre, A.; Pfeffer, M. | Journal Article |
| 2009 | Optimization of multilayered porous acoustic absorbers
Andrä, H.; Kabel, M.; Spies, M.; Rieder, H. | Conference Paper |
| 2008 | 3D characterisation and modelling of fibrous materials
Wirjadi, O.; Malten, R.; Godehardt, M.; Sych, T.; Schladitz, K.; Redenbach, C.; Spies, M. | Poster |
| 2008 | Anodic oxide formation on AA2024
Schneider, M.; Yezerska, O.; Lohrengel, M.M. | Journal Article |
| 2008 | Eigenschaftsanalyse kaltgewalzter Hochverzahnungen
Hellfritzsch, U.; Lahl, M.; Schiller, S. | Conference Paper |
| 2008 | High precision laser structuring of micro forming tools
Schubert, A.; Schneider, J.; Edelmann, J.; Burkhardt, T.; Groß, S. | Conference Paper |
| 2008 | Monitoring of the friction stir welding process to describe parameter effects on joint quality
Jene, T.; Dobmann, G.; Wagner, G.; Eifler, D. | Journal Article, Conference Paper |
| 2007 | Modeling the evolution of microstructure in single and dual phase polycrystalline
Butz, A.; Ripoll, M.R.; Benevolenski, O. | Conference Paper |
| 2007 | Nondestructive mechanical release of ordered polymer microfiber arrays from porous templates
Grimm, S.; Schwirn, K.; Göring, P.; Knoll, H.; Miclea, P.T.; Greiner, A.; Wendorff, J.H.; Wehrspohn, R.B.; Gösele, U.; Steinhart, M. | Journal Article |
| 2007 | The size effect on the creep properties of SnAgCu-solder alloys
Wiese, S.; Roellig, M.; Mueller, M.; Wolter, K.-J.; Bennemann, S.; Petzold, M. | Conference Paper |
| 2006 | Compositional effects on the creep properties of SnAgCu solder
Wiese, S.; Krämer, F.; Müller, M.; Röllig, M.; Wolter, K.-J.; Krause, M.; Bennemann, S.; Petzold, M. | Conference Paper |
| 2006 | Structure of superhard nanocrystalline (Ti,Al)N layers deposited by reactive pulsed magnetron sputtering
Zywitzki, O.; Klostermann, H.; Fietzke, F.; Modes, T. | Journal Article, Conference Paper, Journal Article |
| 2006 | Third International Conference Multiscale Materials Modeling 2006. Proceedings
: Gumbsch, P. | Conference Proceedings |
| 2006 | Verbesserung der Umformeigenschaften von schwer umformbaren Werkstoffen durch lokal vorinitialisierten Wärmeeintrag
Neugebauer, Reimund; Scheffler, S.; Poprawe, R.; Vitr, G. | Report |
| 2005 | Alloying and sintering behaviour of selected iron-graphite-master alloy powder mixtures
Castro Pinto, F.; Sarasola, M.; Baumgaertner, F.; Dougan, M.; Mitchell, S.; Lipp, K.; Bender, H.; Coffin, C.; Dunkley, J. | Conference Paper |
| 2005 | Different carbon based thin films and their microtribological behaviour in MEMS applications
Bandorf, R.; Lüthje, H.; Henke, C.; Wiebe, J.; Sick, J.-H.; Küster, R. | Journal Article |
| 2005 | Investigation of structured TiAIN- and TiO2-coatings with moth-eye-like surface morphologies
Burmeister, F.; Schäffer, E.; Kleer, G.; Döll, W.; Bläsi, B.; Gombert, A. | Journal Article |
| 2005 | Kombination von Stickstoff- und Kohlendioxidadsorption zur Charakterisierung von Mikroporenstrukturen
Schieferstein, E.; Heil, V.; Meller, K. | Journal Article |
| 2005 | Local laser heat treatment of ultra high strength steels to improve formability
Vitr, G.; Scheffler, S.; Weisheit, A.; Wissenbach, K. | Conference Paper |
| 2005 | Mikrofluidisches Mischen als Bestandteil mikroreaktionstechnischer Modellierung
Deerberg, G.; Grän-Heedfeld, J.; Hennig, T.; Weidner, E. | Journal Article |
| 2005 | Phase formation in porous liquid phase sintered silicon carbide: Part II: Interaction between Y2O3 and SiC
Ihle, J.; Herrmann, M.; Adler, J. | Journal Article |
| 2005 | Phase formation in porous liquid phase sintered silicon carbide: Part III: Interaction between Al2O3-Y2O3 and SiC
Ihle, J.; Herrmann, M.; Adler, J. | Journal Article |
| 2005 | Power scaling of high-power fiber lasers and amplifiers
Tünnermann, A.; Höfer, S.; Liem, A.; Limpert, J.; Reich, M.; Röser, F.; Schreiber, T.; Zellmer, H.; Peschel, T.; Guyenot, V. | Journal Article |
| 2005 | Static and fatigue properties of high strength PM-steels
Sigl, L.S.; Delarbre, P.; Lipp, K.; Sonsino, C.M. | Conference Paper |
| 2005 | Tensile and fatigue evaluation of Ti-15Al-33Nb (at.%) and Ti-21Al-29Nb (at.%)alloys for biomedical applications
Boehlert, C.J.; Cowen, C.J.; Jaeger, C.R.; Niinomi, M.; Akahori, T. | Journal Article |
| 2004 | Barkhausen noise and eddy current microscopy - a new scanning probe technique for microscale characterization of materials
Szielasko, K.; Lugin, S.; Kopp, M.; Altpeter, I. | Conference Paper |
| 2004 | Corrosion behaviour of Si3N4 materials in sulphuric acid contaminated with KF
Schilm, J.; Herrmann, M.; Michael, G. | Conference Paper |
| 2004 | Hot embossing of glass and metal
Schubert, A.; Rau, B.; Burkhardt, T.; Borck, J. | Conference Paper |
| 2004 | Laser-patterning of thin films deposited on complex surfaces for the fabrication of micro-sensors
Biehl, S.; Lüthje, H. | Conference Paper |
| 2004 | Synthesis of high-density MgO films by a novel magnetron sputtering system
Nam, K.H.; Jung, M.J.; Han, J.G.; Kopte, T.; Hartung, U.; Peters, C. | Journal Article |
| 2003 | Acousto-thermal microstructure characterization
Meyendorf, N.; Rösner, H.; Frouin, J.; Maurer, J.; Sathish, S. | Conference Paper |
| 2003 | Dynamic magnetostriction for material characterization of micro structure states of degraded structural steel
Pirfo, S.; Szielasko, K.; Altpeter, I.; Dobmann, G. | Conference Paper |
| 2003 | Silver thick-film contacts on highly doped n-type silicon emitters: Structural and electronic properties of the interface
Ballif, C.; Huljic, D.M.; Willeke, G.; Hessler-Wyser, A. | Journal Article |
| 2003 | Some fundamentals of optical thin film growth
Kaiser, N. | Book Article |
| 2002 | Calculation of shape and experimental creation of AuSn solder bumps for flip chip applications
Hutter, M.; Oppermann, H.; Engelmann, G.; Wolf, J.; Ehrmann, O.; Aschenbrenner, R.; Reichl, H. | Conference Paper |
| 2002 | Mechanical stress and thermal-elastic properties of oxide coatings for use in the deep-ultraviolet spectral region
Thielsch, R.; Gatto, A.; Kaiser, N. | Journal Article |
| 2002 | Microstructure and properties of thermally sprayed silicon nitride-based coatings
Thiele, S.; Heimann, R.B.; Berger, L.-M.; Herrmann, M.; Nebelung, M.; Schnick, T.; Wielage, B.; Vuoristo, P. | Journal Article |
| 2002 | Structure and defects of vapor-phase-grown diamond nanocrystals
Jiang, X.; Jia, C.L. | Journal Article |
| 2001 | Microscopic formtesting of large area microstructures by means of formtesting interferometry
Schneefuß, K.; Pfeifer, T. | Conference Paper |
| 2001 | Nondestructive characterization of fatigue damage with thermography
Rösner, H.; Sathish, S.; Meyendorf, N. | Conference Paper |
| 2001 | Some new aspects of microstructural design of Beta-Si3N4 ceramics
Herrmann, M.; Schulz, I.; Hermel, W.; Schubert, C.; Wendt, A. | Journal Article |
| 2000 | High quality heteroepitaxial diamond films on silicon
Jiang, X.; Fryda, M.; Jia, C.L. | Journal Article |
| 2000 | High temperature oxidation and corrosion of silicon-based non-oxide ceramics
Klemm, H.; Herrmann, M.; Schubert, C. | Journal Article |
| 2000 | High-temperature properties of Si3N4/SiC microcomposites
Klemm, Hagen; Herrmann, Mathias; Schubert, Christian | Journal Article, Conference Paper |
| 2000 | Thermographic Characterization of the Material Microstructure Using Dissipative Effects
Rösner, H.; Meyendorf, N.; Sathish, S. | Conference Paper |
| 1999 | Model combustor to assess the oxidation behavior of ceramic materials under real engine conditions
Filsinger, D.; Schulz, A.; Wittig, S.; Klemm, H.; Taut, C.; Wötting, G. | Conference Paper |
| 1999 | Schwingfestigkeit induktionsgehärteter Bauteile aus AFP-Stählen
Kaufmann, H.; Sonsino, C.M. | Journal Article |
| 1998 | AFM helps engineer low-scatter thin films
Duparre, A.; Kaiser, N. | Journal Article |
| 1998 | Betriebsfestigkeitsverhalten einer Auswahl von nichtrostenden Stählen für den Anlagen- und Waggonbau. Abschlußbericht
Müller, F.; Sonsino, C.M. | Book |
| 1998 | Grain shape in sintered submicrometre alumina
Krell, A.; Obenaus, P. | Journal Article |
| 1998 | Materials technology drives impeller design
Sonsino, C.M. | Journal Article |
| 1998 | Microstructure and Texture Influences on Ultrasonic Quantities for Welding Stress Analysis
Arenz, U.; Schneider, E. | Conference Paper |
| 1998 | Mikrostrukturelle Charakterisierung der von kurzen Lichtpulsen hoher Intensität hervorgerufenen Werkstoffveränderungen. Abschlußbericht
Franz, U.; Luft, A.; Kaspar, J.; Emsermann, A. | Report |
| 1998 | Modeling parameter extraction for DNQ-Novolac thin film resists
Henderson, C.L.; Scheer, S.A.; Tsiartas, P.C.; Rathsack, B.M.; Sagan, J.P.; Dammel, R.R.; Erdmann, A.; Willson, C.G. | Conference Paper |
| 1998 | Nondestructive Analysis of Stress States in Components using Micromagnetic and Ultrasonic Techniques - An Overview
Schneider, E. | Conference Paper |
| 1998 | PM looks forward to pump impeller role
Sonsino, C.M.; Zieschang, R.; Arnhold, V.; Hofmann, B.; Gonia, D.; Sandritter, K.H. | Journal Article |
| 1998 | Ein Verfahren zur Bemessung elektronenstrahlgehärteter Randschichten unter Wälzbeanspruchung
Schöpfel, A. | Dissertation |
| 1997 | Hochverschleißfeste Schichten auf Stahl und Titan
Techel, A.; Nowotny, S. | Conference Paper |
| 1997 | IFAM advancing MIM technology
Weber, M.; Petzoldt, F.; Hartwig, T.; Veltl, G. | Journal Article |
| 1997 | Micro-structuring by laser beam removal
Hellrung, D.; Gillner, A.; Poprawe, R. | Conference Paper |
| 1997 | Microstructure. Property relationships of thermoplast/thermoset adhesive blends
Ludwig, M.; Schäfer, H.; Hennemann, O.-D.; Petermann, J. | Conference Paper |
| 1997 | Properties of SiO2 and Al2O3 films for use in UV-optical coatings
Thielsch, R.; Duparre, A.; Schulz, U.; Kaiser, N. | Conference Paper |
| 1997 | Quantitative image analysis techniques for the evaluation of porosity
Laz, P.J. | Book |
| 1997 | Schwingfestigkeit von geschweißten Komponenten unter komplexen elasto-plastischen, mehrachsigen Verformungen
Sonsino, C.M. | Report |
| 1996 | Development of high-strength P/M steels with optimized microstructure by new alloying and sintering techniques
Brandt, U.; Sonsino, C.M.; Engström, U.; Ernst, E.; Hoffmann, E. | Conference Paper |
| 1996 | Dry etching and micromachining of precision Silicon components
Kreutz, E.W.; Pfleging, W.; Jandeleit, J.; Urbasch, G. | Conference Paper |
| 1996 | Early detection of hydrogen-induced stress corrosion cracking using micromagnetic test methods
Lang, M.A.; Altpeter, I.; Dobmann, G. | Conference Paper |
| 1996 | How sintering time and temperature influence fatigue
Lindner, K.-H.; Sonsino, C.M. | Book Article |
| 1996 | Nondestructive evaluation of material parameters using neural networks
Fiedler, U.; Kröning, M.; Theiner, W. | Conference Paper |
| 1995 | Double shear creep testing of superalloy single crystals at temperatures above 1000 degree C
Mayr, C.; Eggeler, G.; Webster, G.A.; Peter, G. | Journal Article |
| 1995 | Fortschritte für Hochleistungs-Aluminiumoxid
Krell, Andreas | Book Article |
| 1995 | Laser machining of Si3N4 ceramics
Burck, P.; Wiegel, K. | Journal Article |
| 1995 | Light scattering of thin dielectric films
Duparre, A. | Book Article |
| 1995 | Preparation of cubic boron nitride films by use of electrically conductive boron carbide targets
Lüthje, H.; Bewilogua, K.; Daaud, S.; Johansson, M.; Hultmann, L. | Journal Article |
| 1995 | Schwingfestigkeit von hochfesten Feinkornbaustählen im brenngeschnittenen Zustand
Kaufmann, H.; Sonsino, C.M.; Schönherr, W. | Journal Article |
| 1994 | Analysis of creep in a welded 'P91' pressure vessel
Eggeler, G.; Ramteke, A.; Coleman, M.; Chew, B.; Peter, G.; Burblies, A.; Hald, J.; Jefferey, C.; Rantala, J.; deWitte, M.; Mohrmann, R. | Journal Article |
| 1994 | Beiträge zum Sinterverhalten von LaCrO3-Pulvern
Eichler, K.; Otschik, P.; Jaenicke-Rößler, K. | Book |
| 1994 | Einfluß der Sinterzeit und -temperatur auf das Schwingfestigkeitsverhalten des diffusionslegierten Sinterstahls Fe-4.0 Prozent Ni-1.5 Prozent Cu-0.5 Prozent Mo plus 0.6 Prozent C.
Lindner, K.-H.; Sonsino, C.M. | Journal Article |
| 1994 | Einfluß von Härtungsparametern auf die Schwingfestigkeit von Gesenkschmiedeteilen
Kaufmann, H.; Ziemann, M.; Klemz, R.; Sonsino, C.M. | Journal Article |
| 1994 | Herstellung hartmetallähnlicher Verschleißschutzschichten durch Laserauftragsschweißen von Hartstoff-Hartlegierungs-Pulvergemischen
Nowotny, S.; Techel, A.; Luft, A.; Reitzenstein, W. | Conference Paper |
| 1994 | Hochfeste Keramiken auf Al2O3-Basis durch kontrollierte Korngrenzenstrukturen
Krell, A.; Seidel, J. | Conference Paper |
| 1994 | How sintering time and temperature influence fatigue
Lindner, K.-H.; Sonsino, C.M. | Journal Article |
| 1994 | How sintering time and temperature influence fatigue
Lindner, K.-H.; Sonsino, C.M. | Conference Paper |
| 1994 | Microstructure and contours of crack tip crazes in PVC created under different loading conditions
Könczöl, L.; Döll, W.; Michler, G.H.; Enßlen, M. | Conference Paper |
| 1994 | Microstructure and properties of SiCN-nanocomposites
Herrmann, M.; Klemm, H.; Schubert, C.; Hermel, W.; Millers, T.; Rendtel, A. | Book Article |
| 1994 | Microstructure and properties of SiCN-nanocomposites
Herrmann, M.; Klemm, H.; Schubert, C.; Hermel, W.; Millers, T.; Rendtel, A. | Conference Paper |
| 1994 | Schwingfestigkeit des diffusionslegierten Sinterstahls Fe-4.0%Ni-1.5%Cu-0.5%Mo+0.6%C in Abhängigkeit von der Sinterzeit und -Temperatur.
Sonsino, C.M. | Book |
| 1994 | Silicon nitride materials featured by superior creep and fracture resistance at 1400 degree
Klemm, H.; Herrmann, M.; Reich, T.; Schubert, C. | Conference Paper |
| 1994 | Sinterability on doped lanthanum chromite
Eichler, K.; Syskakis, E.; Otschik, P.; Naoumidis, A.; Jaenicke-Rößler, K. | Conference Paper |
| 1994 | Sintering and microstructure of Si3N4-materials
Hermel, W.; Herrmann, M.; Schulz, I. | Conference Paper |
| 1994 | Struktur und Verschleißeigenschaften von Hartstoffbeschichtungen
Nowotny, S.; Techel, A.; Müller, A.; Luft, A. | Book Article |
| 1993 | Densification, microstructure and properties of SiCN-nanocomposites
Herrmann, M.; Millers, T.; Rendtel, A.; Reich, T.; Boden, G.; Schubert, C. | Conference Paper |
| 1993 | Determination of the dynamic material properties of shock-loaded silicon-nitride
Nahme, H.; Hohler, V.; Stilp, A.J. | Conference Paper |
| 1993 | Eigenschaften und Gefügeuntersuchungen an gradierter Siliziumcarbid-Titancarbid-Keramik
Teichgräber, M. | Conference Proceedings |
| 1993 | Have the limits of the development of Beta-Si3N4-materials already been reached?
Hermel, W.; Herrmann, M.; Schubert, C. | Conference Paper |
| 1993 | Qualitätssicherung durch zerstörungsfreie Ermittlung des Werkstoffzustandes
Kröning, M.; Meyendorf, N. | Conference Paper |
| 1993 | Redistribution of the liquid phase during sintering of silicon nitride
Herrmann, M.; Boberski, C.; Michael, G.; Putzky, G.; Hermel, W. | Journal Article |
| 1993 | Schwingfestigkeit von hochfesten Feinkornbaustählen im brenngeschnittenen Zustand. Forschungsbericht.
Sonsino, C.M.; Kaufmann, H.; Müller, F.; Berghöfer, U. | Book |
| 1993 | Thermal stability of ultrafine grained and nanocrystalline metals
Kumpmann, A.; Günther, B.; Kunze, H.-D. | Conference Paper |
| 1993 | Zerstörungsfreie Ermittlung des Werkstoffzustandes
Kröning, M.; Meyendorf, N. | Conference Paper |
| 1992 | Einfluß von Härtungsparametern auf die Schwingfestigkeit von Gesenkschmiedeteilen
Kaufmann, H.; Sonsino, C.M.; Wetter, E. | Journal Article |
| 1992 | Einfluß von Induktiv-Härtungsparametern auf die Schwingfestigkeit von Gesenkschmiedeteilen
Kaufmann, H. | Book |
| 1992 | First attempts towards the early detection of fatigued substructures using cyclic-loaded 20 MnMoNi 5 5 steel
Seibold, A.; Dobmann, G. | Journal Article |
| 1992 | Structural and mechanical properties of niobium-containing amorphous hydrogenated carbon films (Nb-C:H)
Fryda, M.; Benndorf, C.; Klages, C.-P.; Taube, K. | Journal Article, Conference Paper |
| 1991 | Acoustic nonlinearity in metal-matrix composites
Lee, D.; Mohrbacher, H.P.; Salama, K.; Schneider, E. | Conference Paper |
| 1991 | Dispersion of hard particles in light alloys with Co2 laser radiation
Gasser, A.; Kreutz, E.W.; Krönert, K.; Lohmann, K.; Wissenbach, K.; Zografou, C. | Conference Paper |
| 1991 | Einfluß der Laserbehandlung auf das Korrosionsverhalten vakuumplasmagespritzter Titan- und Niobschichten
Lugscheider, E.; Hofmann, D.; Jansen, F.; Nicoll, A.R.; Kreutz, E.W.; Wissenbach, K.; Gasser, A. | Conference Paper |
| 1991 | Einfluß verschiedener Wärmebehandlungsverfahren auf die Schwingfestigkeit von PM-Sinterstählen
Sonsino, C.M. | Journal Article |
| 1991 | Electrical conductivity and microstructure of metal-containing a-C-H films.
Benndorf, C.; Boettger, E.; Fryda, M.; Haubold, H.G.; Köberle, H.; Klages, C.-P. | Conference Paper |
| 1991 | Microstructure and wear behaviour of metal-containing diamond-like coatings
Dimigen, H.; Klages, C.-P. | Journal Article, Conference Paper |
| 1990 | Einfluß verschiedener Wärmebehandlungsverfahren auf die Schwingfestigkeit von PM-Sinterstählen
Sonsino, C.M. | Conference Paper |
| 1990 | Lifetime prediction in high temperature component.
Bressers, J.; Danzer, R.; Gerold, V.; Guttmann, V.; Henderson, J.; Schneider, K.; Hollstein, T. | Conference Paper |
| 1990 | Nondestructive stress and microstructure analysis by ultrasonic
Höller, P.; Schneider, E.; Willems, H. | Conference Paper |
| 1990 | Surface melting of AlSi10Mg with Co2 laser radiation
Backes, G.; Gasser, A.; Kreutz, E.W.; Ollier, B.; Pirch, N.; Rozsoki, M.; Wissenbach, K. | Conference Paper |
| 1989 | The short-range-order of mechanically alloyed amorphous Ni-Zr. A comparison of experiment and simulation
Petzoldt, F.; Burblies, A. | Journal Article |
| 1989 | Strain rate dependence of mechanical behaviour and evaluation of the microstructure of tungsten monocrystals
Chiem, C.Y.; Meyer, L.W. | Conference Paper |
| 1988 | Electron-beam welding of precipitation hardened nickel-base superalloys - assessment of weldability using metallurgical methods
Busch, W.-B.; Kunze, H.-D. | Conference Paper |
| 1988 | Evaluation of residual stress states in welded parts - Using ultrasonic techniques
Schneider, E. | Book Article |
| 1988 | Impact loading and dynamic behaviour of materials. Vol.1
: Meyer, L.W.; Kunze, H.-D.; Chiem, C.Y. | Conference Proceedings |
| 1988 | Influence of regeneration treatments on creep rupture lifes of turbine blades
Wortmann, J.; Busch, W.-B. | Book Article |
| 1988 | Preparation of bulk amorphous Ni60Nb40.
Petzoldt, F.; Scholz, B.; Kunze, H.-D.; Held, M. | Conference Paper |
| 1988 | Production of amorphous Ni-Zr powder by mechanical alloying of pure elements and by milling of intermetallic compounds
Petzoldt, F.; Scholz, B.; Kunze, H.-D. | Abstract |
| 1987 | Evaluation of residual stress states in welded plates using ultrasonic techniques
Chu, S.-L.; Peukert, H.; Schneider, E. | Book Article |
| 1985 | Fatigue life of superplastically formed Ti-6Al-4V
Busch, W.-B.; Kunze, H.-D. | Conference Paper |