Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Success Factors for Effective Process Metrics Operationalization in Agile Software Development
Ram, Prabhat; Rodriguez, Pilar; Oivo, Markku; Martínez-Fernández, Silverio
Conference Paper
2018A Context-Aware, Confidence-Disclosing and Fail-Operational Dynamic Risk Assessment Architecture
Feth, Patrik; Adler, Rasmus; Schneider, Daniel
Conference Paper
2018Definition of the On-time Delivery Indicator in Rapid Software Development
Manzano, Martí; Gómez, Cristina; Ayala, Claudia; Martínez-Fernández, Silverio; Ram, Prabhat; Rodríguez, Pilar; Oriol, Marc
Conference Paper
2018Focusing Requirements Elicitation by Using a UX Measurement Method
Ohashi, Kyoko; Katayama, Asako; Hasegawa, Naoki; Kurihara, Hidetoshi; Yamamoto, Rieko; Dörr, Jörg; Magin, Dominik Pascal
Conference Paper
2018In Situ Characterization of Thermal Collectors in Field Installations
Fahr, S.; Gumbel, U.; Zirkel-Hofer, A.; Kramer, K.
Conference Paper
2018On the Selection and Assessment of Input Variables for the Characteristic Diagram Based Correction of Thermo-Elastic Deformations in Machine Tools
Ihlenfeldt, Steffen; Naumann, Christian; Putz, Matthias
Conference Paper
2018Potential analysis of a rear-side passivation for multi-junction space solar cells based on germanium substrates
Weiss, Charlotte; Schön, Jonas; Höhn, Oliver; Mohr, Christian; Kurstjens, Rufi; Boizot, Bruno; Janz, Stefan
Conference Paper
2018Surveying games with a combined model of immersion and flow
Kannegieser, Ehm; Atorf, Daniel; Meier, J.
Conference Paper
2017Managing development using active data collection
Kläs, Michael; Elberzhager, Frank
Conference Paper
2017Solder joint stability study of wire-based interconnection compared to ribbon interconnection
Walter, J.; Rendler, L.C.; Ebert, C.; Kraft, A.; Eitner, U.
Journal Article, Conference Paper
2016Bidirectional symbolic analysis for effective branch testing
Baluda, Mauro; Denaro, Giovanni; Pezze, Mauro
Journal Article
2016Characterization of perovskite solar cells: Towards a reliable measurement protocol
Zimmermann, E.; Wong, K.K.; Müller, M.; Hu, H.; Ehrenreich, P.; Kohlstädt, M.; Würfel, U.; Mastroianni, S.; Mathiazhagan, G.; Hinsch, A.; Gujar, T.P.; Thelakkat, M.; Pfadler, T.; Schmidt-Mende, L.
Journal Article
2015A generic interface specification for standardized retrieval and statistical evaluation of spatial and temporal data
Kohlmorgen, Jens
Conference Paper
2015Interaction analysis through fuzzy temporal logic: Extensions for clustering and parameter learning
Ijsselmuiden, Joris; Dornheim, J.
Conference Paper
2015Mathematical optimization of clamping processes in car-body production
Hofmann, Andre; Rössinger, Markus; Ackert, Patrick; Schwarz, Christian; Landgrebe, Dirk
Presentation
2015New approach for measurement & simulation in sheet metal forming
Ackert, Patrick; Schwarz, Christian; Müller, Johannes; Landgrebe, Dirk
Presentation
2015Simulation und experimentelle Validierung von Temperaturen, Härtegut und Eigenspannungen bei der induktiven Wärmebehandlung
Schweizer, F.; Asperheim, J.-I.; Stiele, H.-J.
Journal Article
2015User-centric security. Optimization of the security-usability trade-off
Feth, Denis
Conference Paper
2014Agile practices in practice. A mapping study
Diebold, Philipp; Dahlem, Marc
Report
2014Agile practices in practice. A mapping study
Diebold, Philipp; Dahlem, Marc
Conference Paper
2014Aligning organizations through measurement. The GQM+strategies approach
Basili, Victor R.; Trendowicz, Adam; Kowalczyk, Martin; Heidrich, Jens; Seaman, Carolyn B.; Münch, Jürgen; Rombach, H. Dieter
Book
2014Development, simulation and measurement of functionally integrated piezoelectric mount
Tarle, Polya; Bartel, Thorsten; Gaisbauer, Samuel
Conference Paper
2014Measurement of small angle ray deviations for concentrating solar applications: Circumsolar radiation and mirror beam spread
Nitz, P.; Schmid, T.; Schmidt, T.; Hornung, T.; Heimsath, A.
Conference Paper
2014Model-based quality management of software development projects
Heidrich, Jens; Rombach, H. Dieter; Kläs, Michael
Book Article
2014Practitioners' and researchers' expectations on design space exploration for multicore systems in the automotive and avionics domains - a survey
Diebold, Philipp; Lampasona, Constanza; Zverlov, Sergey; Voss, Sebastian
Report
2014Practitioners' and researchers' expectations on design space exploration for multicore systems in the automotive and avionics domains - a survey
Diebold, Philipp; Lampasona, Constanza; Zverlov, Sergey; Voss, Sebastian
Conference Paper
2013Anti-reflection-coating thickness measurements on textured silicon surfaces: Evaluation and accuracy of different measurement techniques
Krieg, A.; Greulich, J.; Tondorf, M.; Rein, S.
Conference Paper
2013Factors influencing perceived project success in large R&D projects: An exploratory study
Chehrazi, Golriz; Lampasona, Constanza; Klaus, Alexander
Conference Paper
2013A novel method to determine the electric, piezoelectric and elastic coefficients of fine scale piezoceramic fibers
Dittmer, Robert; Rödig, Thomas; Schönecker, Andreas
Conference Paper
2013Optimierung von Tests durch Fokussierung auf Basis von Fehler-KPIs - eine Baseline, erste Erfahrungswerte und Best Practices
Elberzhager, Frank; Ochs, Michael A.; Zimmermann, Fabian; Becker, Ulrich; Nordmann, Ingo
Report
2012Architectural flexibility in a software-system's life-cycle: Systematic construction and exploitation of flexibility
Naab, Matthias; Stammel, Johannes
Conference Paper
2012Architectural Flexibility in a Software-System's Life-Cycle: Systematic Construction and Exploitation of Flexibility
Naab, Matthias; Stammel, Johannes
Report
2012On optical quantification of cavitation properties
Borchert, Stefan; Kröger, Willfried; Höhne, Stephan; Damaschke, Nils Andreas; Zhou, Zhiliang
Conference Paper
2012Optimierung von Tests durch Fokussierung auf Basis von Fehler-KPIs - eine Baseline, erste Erfahrungswerte und Best Practices
Elberzhager, Frank; Ochs, Michael A.; Zimmermann, Fabian; Becker, Ulrich; Nordmann, Ingo
Journal Article
2012Residual stress calculations and measurements
Wohlfahrt, H.; Nitschke-Pagel, T.; Dilger, K.; Siegele, D.; Brand, M.; Sakkiettibutra, J.; Loose, T.
Journal Article
2012Specula project support environment (PSE) open source software
Heidrich, Jens
Report
2011Aligning software processes with organizational purpose using a measurement-based approach
Kowalczyk, Martin
Report
2011Chameleo-AD: Real-time targeted interactive advertisement for digital signage
Jung, Christoph; Tausch, Reimar; Thekkeveettil, Jens; Oundouh, Tarik; Han, Bin; Schmidt, Roman Gabriel; Wilbers, Daniel
Report
2011Distinct EUV minimum of the solar irradiance (16-40 nm) observed by SolACES spectrometers onboard the International Space Station (ISS) in August/September 2009
Nikutowski, B.; Brunner, R.; Erhardt, C.; Knecht, S.; Schmidtke, G.
Journal Article
2011Integrating mobile devices into the car ecosystem - tablets and smartphones as vital part of the car
Hess, Steffen; Meschtscherjakov, Alexander; Ronneberger, Torsten; Trapp, Marcus
Conference Paper
2011Investigating the effect of cognitive load on UX: A driving study
Jung, Jessica; Maier, Andreas; Groß, Anne; Ruiz, Natalie; Chen, Fang; Yin, Bo
Conference Paper
2011Investigating the effect of cognitive load on UX: A driving study
Jung, Jessica; Maier, Andreas; Groß, Anne; Ruiz, Natalie; Chen, Fang; Yin, Bo
Report
2011Life-Science - related measurements
Keller, Markus
Conference Paper
2011Materialemissionen und Luftqualität in Museumsvitrinen
Schieweck, A.
Journal Article
2011Das Projekt IDA-Insel: Telemedizinische Erfassung von Aktivität, Ruhe und Ernährung bei Kindern und Jugendlichen mit Übergewicht und Adipositas
Schiel, Ralf; Kaps, Alexander; Bieber, Gerald
Journal Article
2011The relevance of assumptions and context factors for the integration of inspections and testing
Elberzhager, Frank; Eschbach, Robert; Münch, Jürgen
Conference Paper
2011The right process for each context: Objective evidence needed
Armbrust, Ove; Rombach, H. Dieter
Conference Paper
2011The right process for each context: Objective evidence needed
Armbrust, Ove; Rombach, H. Dieter
Report
2011Structuring of tribological active surfaces for reduction of frictional losses
Schubert, A.; Edelmann, J.; Sylla, D.; Hackert-Oschätzchen, M.
Conference Paper
2010Analysis of influences on occurrence of magnetism during cutting processes
Bähre, D.; Becker, D.; Tschuncky, R.
Conference Paper
2010Goal-oriented customization of software cockpits
Heidrich, Jens; Münch, Jürgen
Journal Article
2010The impact of design complexity on sofware quality - a meta analysis
Anh, Nguyen Duc; Ciolkowski, Marcus
Conference Paper
2010In-depth analyses. Detailed studies of coating structure and performance are now possible
Christ, Ulrich; Nothhelfer-Richter, Rolf; Wanner, Matthias; Schauer, Thadeus
Journal Article
2010Multi-hop packet tracking for experimental facilities
Santos, T.; Henke, C.; Schmoll, C.; Zseby, T.
Conference Paper
2010New characterization methods for the assessment and the design of friction optimized surfaces
Gröger, S.; Burkhardt, T.; Eckert, U.; Kühn, C.
Conference Paper
2010Transparent combination of expert and measurement data for defect prediction - an industrial case study
Kläs, Michael; Elberzhager, Frank; Münch, Jürgen; Hartjes, Klaus; Graevemeyer, Olaf von
Report
2009Application of solid sorbents for the sampling of volatile organic compounds in indoor air
Uhde, E.
Book Article
2009Context management in dynamic environments
Tiemann, J.; Belikov, E.; Astudillo, H.
Conference Paper
2009Druckstoß in Stich-/Messleitungen - geschlossenes Ende
Dudlik, A.
Conference Paper
2009Dust emissions from foundries in Tông Xá and integration of the results into the objectives of IWRM
Assmus, K.; Keuter, V.; Emmerich, R.
Journal Article, Conference Paper
2009Einsatz stochastischer Optimierungsmodelle zur Dimensionierung und zur Planung der Fahrweise lokaler Biogas-Speicher
Epe, A.; Lucht, M.; Weber, C.; Woll, O.
Book Article
2009Environmental test chambers and cells
Salthammer, T.
Book Article
2009Gender-specific patterns in patenting and publishing
Frietsch, R.; Haller, I.; Funken-Vrohlings, M.; Grupp, H.
Journal Article
2009Goal-oriented customization of software cockpits
Heidrich, Jens; Münch, Jürgen
Report
2009Goal-oriented quantitative software project control
Heidrich, Jens
Dissertation
2009Implementing software project control centers: An architectural view
Heidrich, Jens; Münch, Jürgen
Report
2009K-band ESR studies of structural anisotropy in P3HT and P3HT/PCBM blend polymer solid films: Paramagnetic defects after continuous wave Xe-lamp photolysis
Konkin, A.; Roth, H.-K.; Scharff, P.; Aganov, A.; Ambacher, O.; Sensfuss, S.
Journal Article
2009Measurement-based software quality evaluation
Lampasona, Constanza; Trendowicz, Adam; Kläs, Michael; Heidrich, Jens
Conference Paper
2009Measurement-based software quality evaluation
Trendowicz, Adam; Kläs, Michael; Heidrich, Jens; Lampasona, Constanza
Report
2009Measurements and evaluations for an IEEE 802.11a based carrier-grade multi-radio wireless mesh network deployment
Robitzsch, S.; Niephaus, C.; Fitzpatrick, J.; Kretschmer, M.
Conference Paper
2009Water hammer 2 phase analysis hydraulic system with a Kaplan turbine
Dudlik, A.; Koutnik, J.
Conference Paper
2009Water hammer and condensation hammer scenarios in power plants using new measurement system
Dudlik, A.; Prasser, H.-M.
Journal Article
2008Assessing process maturity of open source projects
Ciolkowski, Marcus; Soto, Martin
Conference Paper
2008Gender-specific patterns in patenting and publishing
Frietsch, R.; Haller, I.; Vrohlings, M.; Grupp, H.
Report
2008Implementing software project control centers: An architecural view
Heidrich, Jens; Münch, Jürgen
Conference Paper
2008Managing software quality through a hybrid defect content and effectiveness model
Kläs, Michael; Elberzhager, Frank; Nakao, Haruka
Conference Paper
2008Organizational innovation: The challenge of measuring non-technical innovation in large-scale surveys
Armbruster, H.; Bikfalvi, A.; Kinkel, S.; Lay, G.
Journal Article
2008Perspective on global software development. Special issue on PROFES 2007
Abrahamsson, Pekka; Münch, Jürgen; Kuvaja, Pasi
Journal Article
2008Practical guidelines for introducing software cockpits in industry
Ciolkowski, Marcus; Heidrich, Jens; Münch, Jürgen
Conference Paper
2008Satellite based health network in Peru and Brazil
Sachpazidis, Ilias; Rizou, Despoina; Menary, Wayne
Conference Paper
2007Accuracy control for the final finish of mega-yachts
Wanner, Martin-Christoph; Kunkel, Jan
Journal Article
2007Cost-efficient customization of software cockpits by reusing configurable control components
Heidrich, Jens; Münch, Jürgen
Conference Paper
2007Diffusion tensor imaging-based fractional anisotropy quantification in the corticospinal tract of patients with amyotrophic lateral sclerosis using a probabilistic mixture model
Schimrigk, S.K.; Bellenberg, B.; Schlüter, M.; Stieltjes, B.; Drescher, R.; Rexilius, J.; Lukas, C.; Hahn, H.K.; Przuntek, H.; Köster, O.
Journal Article
2007Effective data interpretation
Münch, Jürgen
Conference Paper
2007Instrument for the Measurement of EUV Reflectance and Scattering - MERLIN
Schröder, S.; Kamprath, M.; Gliech, S.; Duparre, A.; Tünnermann, A.
Conference Paper
2007Interobserver-variability of lung nodule volumetry considering different segmentation algorithms and observer training levels
Bolte, H.; Jahnke, T.; Schäfer, F.K.W.; Wenke, R.; Hoffmann, B.; Freitag-Wolf, S.; Dicken, V.; Kuhnigk, J.-M.; Lohmann, J.; Voß, S.; Knöß, N.; Heller, M.; Biederer, J.
Journal Article
2007Lessons learned and results from applying data-driven cost estimation to industrial data sets
Heidrich, Jens; Trendowicz, Adam; Münch, Jürgen; Ishigai, Yasushi; Yokoyama, Kenji; Kikuchi, Nahomi; Kawaguchi, T
Conference Paper
2007Measurement Problems
Duparre, A.; Ristau, D.
Conference Paper
2007Nonlinear ultrasonic transmission through thin bonded interface: Theoretical background and numerical simulations
Hirsekorn, S.; Hirsekorn, M.; Delsanto, P.P.
Book Article
2007A novel iterative method for lesion delineation and volumetric quantification with FDG PET
Dalen, J.A. van; Hoffmann, A.L.; Dicken, V.; Vogel, W.V.; Wiering, B.; Ruers, T.J.; Karssemeijer, N.; Oyen, W.J.G.
Journal Article
2007Planung und Kontrolle von Operationen und Interventionen anhand der Computertomographie
Pommer, Mira
: Dold, Christian (Betreuer)
Thesis
2007UV-VIS-NIR scatter measurement methods for ultra precision surfaces and coatings
Gliech, S.; Wendt, R.; Duparre, A.
Conference Paper
20063-D overlay assembly of mechanical components with sub-micron accuracy
Mohaupt, M.; Eberhardt, R.; Beckert, E.; Damm, C.; Peschel, T.; Tünnermann, A.
Conference Paper
2006Entwicklung eines simulationsfähigen COTS Assessments und Selection Tools auf Basis eines für Software adäquaten hierarchischen MCDM Meta Modells
Schillinger, D.
: Rombach, H.D. (Prüfer); Ochs, M.A. (Prüfer)
Thesis
2006Incorporation of a-priori information in planning the next best view
Munkelt, C.; Denzler, J.; Kühmstedt, P.
Conference Paper
2006Metamodellbasierte Integration von Projekt Controlling Mechanismen in das V-Modell XT - Positionspapier
Kuhrmann, M.; Münch, J.; Rausch, A.
Conference Paper
2006Quantifizierung des Lungenemphysems in der Mehrschicht-CT mittels verschiedener Softwareverfahren
Heußel, C.P.; Achenbach, T.; Buschsieweke, C.; Kuhnigk, J.; Weinheimer, O.; Hammer, G.; Düber, C.; Kauczor, H.U.
Journal Article
2006Soft-Pit: Ganzheitliche Projekt-Leitstände zur ingenieurmäßigen Software-Projektdurchführung
Münch, J.; Heidrich, J.; Simon, F.; Lewerentz, C.; Siegmund, B.; Bloch, R.; Kurpicz, B.; Dehn, M.
Conference Paper
2006Zielorientierte Nutzung von Projektleitständen
Heidrich, J.; Münch, J.; Wickenkamp, A.
Conference Paper
2005Accumulation and presentation of empirical evidence: Problems and challenges
Ciolkowski, M.; Münch, J.
Journal Article
2005Accumulation and Presentation of Empirical Evidence: Problems and Challenges
Ciolkowski, M.; Münch, J.
Conference Paper
2005An approach to the development of tolerance systems for micro- and nanotechnology
Schöbel, J.; Westkämper, E.
Conference Paper
2005Development of intelligent services for micro milling
Stolz, M.; Westkämper, E.
Conference Paper
2005Measurement system to determine the total and angle-resolved light scattering of optical components in the deep-ultraviolet and vacuum-ultraviolet spectral regions
Schröder, S.; Gliech, S.; Duparre, A.
Journal Article
2005Mikrodurchflusssensorik für höherviskose Fluide
Güttler, S.; Lenz, T.
Journal Article
2005Novel 3D-scanner based on electrostatically driven resonant micromirrors
Schelinski, U.; Gerwig, C.; Neumann, H.; Dallmann, H.-G.; Kleinmann, L.; Nauber, P.; Wolter, A.; Bergmann, A.; Scholles, M.
Conference Paper
2005The TAME project: Towards improvement-oriented software environments
Basili, V.R.; Rombach, H.D.
Book Article
2004Design and implementation of a measurement tool for verification- and validation activities
Kuhn, T.
: Rombach, H.D. (Prüfer); Freimut, B. (Prüfer)
Thesis
2004Development of web services for collecting measurement data
Knieling, S.
: Rombach, H.D.; Heidrich, J.
Report
2004Launching European funded projects on the EMVA platform - challenges, possibilities and concrete project proposals
Modrich, K.-U.
Conference Paper
2004Maturing a prototype of a code measurement system
Wickenkamp, A.
: Rombach, H.D. (Prüfer); Punter, T. (Prüfer); Assmann, D. (Prüfer)
Thesis
2004Project network HuMin/MD - advanced data analysis methods for metal detectors
Eigenbrod, H.
Conference Paper
2004Prozessorientierte Kontaminationskontrolle auf technischen Oberflächen mittels eines NIR-LED-Photodiodensystems
Modrich, K.-U.
Conference Paper
2004Surface inspection with near infrared spectroscopy - possibilities, applications and visions
Modrich, K.-U.
Conference Paper
2003Experiences in specifying perceived software quality
Punter, T.
Conference Paper
2003Large signal modeling of AlGaN/GaN HEMTs with Psat > 4 W/mm at 30 GHz suitable for broadband power applications
Raay, F. van; Quay, R.; Kiefer, R.; Schlechtweg, M.; Weimann, G.
Conference Paper
2003Nondestructive topographic resistivity evaluation of semi-insulating SiC substrates
Stibal, R.; Müller, S.; Jantz, W.; Pozina, G.; Magnusson, B.; Ellison, A.
Journal Article
2003Simultaneous five-axis-machining of complex shaped parts
Klocke, F.; Markworth, L.; Glasmacher, L.
Conference Paper
2003Wie wird E-Learning genutzt? - Eine empirische Untersuchung
Grützner, I.; Hebestreit, C.; Ochs, M.A.; Vollmers, C.; Waterson, P.
Report
2003Wie wird E-Learning genutzt? - Eine empirische Untersuchung
Grützner, I.; Hebestreit, C.; Ochs, M.A.; Vollmers, C.; Waterson, P.
Conference Paper
2002Light-scattering measurements of optical thin-film components at 157 and 193 nm
Gliech, S.; Steinert, J.; Duparre, A.
Journal Article
2001Fortschritte bei der betriebsbegleitenden Lecksuche in Fernwärmenetzen mit gelöstem Tracergas
Schwerdt, P.; Hölder, D.; Althaus, W.
Conference Paper
2001High-strength steels in welded state for lightweight constructions under high and variable stress peaks
Demofonti, G.; Riscifuli, S.; Sonsino, C.M.; Kaufmann, H.; Sedlacek, G.; Müller, C.; Hanus, F.; Wegmann, H.G.
Book
2001Innovation quality - a conceptual framework
Haner, U.-E.
Conference Paper
2001Innovative test and measuring in the field of wiring technology
Dreyer, H.
Conference Paper
2001Integration von Expertenmeinungen, Messdaten und Erfahrungen in das Risikomanagement
Freimut, B.; Hartkopf, S.; Kaiser, P.
Conference Paper
2001Investigating reinspection decision accuracy regarding product-quality and cost-benefit estimates
Biffl, S.; Halling, M.
Conference Paper
2001Learning software organizations
Ruhe, G.
Book Article
2001Making meetings work. Discovering success factors for software engineering meetings
Ochs, M.A.; Solingen, R.v.
Report
2001Microscopic formtesting of large area microstructures by means of formtesting interferometry
Schneefuß, K.; Pfeifer, T.
Conference Paper
2001Miniaturisierung der Produktions- und Messtechnik
Westkämper, E.
Journal Article
2001Polymere optical fibers. Technology and potential for automotive data links
Dreyer, H.
Conference Paper
2001Quantitative evaluation of matching methods and validity measures for stereo vision
Banks, J.; Corke, P.
Journal Article
2001Replicated Case Studies for Investigating Quality Factors in Object-Oriented Designs
Briand, L.C.; Wüst, J.; Lounis, H.
Journal Article
2001Simulation of the experimental proof out of wheels and hubs
Rupp, A.; Heinrietz, A.; Ehl, O.
Conference Paper
2001Using FAME Assessments to Define Measurement Goals
Hamann, D.; Beitz, A.; Müller, M.; Solingen, R. van
Conference Paper
2000Aircraft measurements of atmospheric mercury over southern and eastern Germany
Ebinghaus, R.; Slemr, F.
Journal Article
2000Exploring the relationship between design measures and software quality in object-oriented systems
Briand, L.C.; Wüst, J.; Daly, J.; Porter, V.
Journal Article
2000Methoden zur Vermeidung von Druckstößen und Kavitationsschlägen in Rohrleitungssystemen
Dudlik, A.; Schlüter, S.; Fahlenkamp, H.; Alt, J.
Conference Paper
2000The PROFES Improvement Methodology. Enabling Technologies and Methodology Design
Järvinen, J.; Komi-Sirviö, S.; Ruhe, G.
Conference Paper
2000Reuse of Know-How for Software Engineering Training and Education
Ras, E.
: Rombach, H.D. (Prüfer); Ruhe, G. (Prüfer); Differding, C. (Prüfer)
Thesis
1999Beitrag zur Modellierung von Airliftschlaufenreaktoren unter besonderer Berücksichtigung der Gasrezirkulation
Grän-Heedfeld, J.
Dissertation
1999Calculating the dynamic behavior of motor spindles
Ihlenfeldt, S.; Wieland, F.; Neugebauer, Reimund
Conference Paper
1999A cascade impactor with electrical detection optimized for ambient measurements
Holländer, W.; Lödding, H.; Dunkhorst, W.
Conference Paper
1999Do IPT Systems Fulfill Application Requirements? A Study on Luminance on Large-Scale Immersive Projection Devices
Schöffel, F.; Kresse, W.; Müller, S.; Unbescheiden, M.
Conference Paper
1999Energiekonzepte und Realisierungsphase
Kluttig, H.; Erhorn, H.; Hellwig, R.
Journal Article
1999Investigating Quality Factors in Object-Oriented Designs. An Industrial Case Study
Briand, L.C.; Wüst, J.; Ikonomovski, S.; Lounis, H.
Conference Paper
1999Methodology for the safe and economical fatigue design of components in ABS/ETC braking systems under variable amplitude loadings
Sonsino, C.M.; Bacher-Höchst, M.
Report
1999Proof of wheel fasteners by multiaxial tests in the biaxial wheel test rig
Fischer, G.; Hasenmaier, W.; Grubisic, V.
Report
1999A Unified Framework for Coupling Measurement in Object-Oriented Systems
Briand, L.C.; Daly, J.; Wüst, J.
Journal Article
1999Using Coupling Measurement for Impact Analysis in Object-Oriented Systems
Briand, L.C.; Wüst, J.; Lounis, H.
Report
1999Using Coupling Measurement for Impact Analysis in Object-Oriented Systems
Briand, L.C.; Wüst, J.; Lounis, H.
Report
1999Using Coupling Measurement for Impact Analysis in Object-Oriented Systems
Briand, L.C.; Wüst, J.; Lounis, H.
Conference Paper
1999Verhinderung von Druckstößen und Kavitationsschlägen beim schnellen Absperren einer Flüssigkeitsleitung
Dudlik, A.; Schlüter, S.; Prasser, H.-M.
Conference Paper
1998acp Partline Integrated data processing of particle measurements
Naffin, F.; Ernst, C.; Fode, P.
Journal Article
1998Application of aerosols
Koch, Wolfgang
Book Article
1998Automated High-Frequency Sealing in Measuring Instruments
Schraft, R.D.; Spingler, J.; Wößner, J.F.
Book Article
1998Biaxial wheel/hub test facility. Proceedings of the 3rd International User Meeting
Grubisic, V.; Fischer, G.
Conference Proceedings
1998Comparison of procedures for experimental and theoretical durability approval of a truck axle
Dini, A.; Rupp, A.
Report
1998A Comprehensive Empirical Validation of Design Measures for Object-Oriented Systems
Briand, L.C.; Daly, J.; Porter, V.; Wüst, J.
Conference Paper
1998A Comprehensive Empirical Validation of Product Measures for Object-Oriented Systems
Briand, L.C.; Daly, J.; Porter, V.; Wüst, J.
Report
1998A Comprehensive Empirical Validation of Product Measures for Object-Oriented Systems
Briand, L.C.; Daly, J.; Porter, V.; Wüst, J.
Report
1998A Comprehensive Investigation of Quality Factors in Object-Oriented Designs. An Industrial Case Study
Briand, L.C.; Lounis, H.; Ikonomovski, S.; Wüst, J.
Report
1998A Comprehensive Investigation of Quality Factors in Object-Oriented Designs. An Industrial Case Study
Briand, L.C.; Lounis, H.; Ikonomovski, S.; Wüst, J.
Report
1998Defining and Validating Measures for Object-Based High-Level Design
Basili, V.R.; Briand, L.C.; Morasca, S.
Report
1998Defining and Validating Measures for Object-Based High-Level Design
Basili, V.R.; Briand, L.C.; Morasca, S.
Report
1998Design criteria and durability approval of wheel hubs
Fischer, G.; Grubisic, V.
Report
1998A flexible impactor optimized for field use (Abstract)
Holländer, W.; Lödding, H.; Dunkhorst, W.
Journal Article
1998Langzeitmessungen an drei wiederaufgebauten Fachwerkhäusern im Freilichtmuseum Hessenpark, Neu-Anspach
Hävemeyer, H.; Greubel, D.; Mehlhorn, L.; Böttcher, P.
Book Article
1998Measurement of ambient aerosol characteristics for receptor modeling with special emphasis on fine particles (Abstract)
Pohlmann, G.; Koch, W.; Theisen, M.; Nießner, R.
Journal Article
1998Messung und Berechnung von Druckstößen und Kondensationsschlägen in Rohrleitungssystemen
Dudlik, A.; Schlüter, S.; Weinspach, P.-M.
Conference Paper
1998Messung und Berechnung von Druckstößen und Kondensationsschlägen in Rohrleitungssystemen
Dudlik, A.; Schlüter, S.; Weinspach, P.-M.
Conference Paper, Journal Article
1998Neues europäisches Labormeßverfahren für Abwassergeräusche
Scholl, W.
Journal Article
1998Predicting Fault-Prone Classes with Design Measures in Object-Oriented Systems
Briand, L.C.; Daly, J.; Porter, V.; Wüst, J.
Conference Paper
1998Procedure of validation tests in air springs for commercial vehicles
Fischer, G.; Streicher, M.; Grubisic, V.
Report
1998Transiente Strömungen in Rohrleitungen - Messung und Berechnung von Druckstößen und Kavitationsschlägen
Dudlik, A.; Schlüter, S.; Weinspach, P.-M.
Conference Paper
1998A Unified Framework for Cohesion Measurement in Object-Oriented Systems
Briand, L.C.; Daly, J.; Wüst, J.
Journal Article
1997Analysis in GQM-Based Measurement: Feedback Sessions with Rough Sets
Hartkopf, S.
: Rombach, H.D. (Prüfer); Ruhe, G. (Prüfer)
Thesis
1997Development and construction of a low cost colorimeter
Vohsbeck-Petermann, R.
Conference Paper