| | |
|---|
| 2018 | Evaluation of super hard ta-C coatings for the machining of synthetic materials
Kaulfuß, Frank; Busch, Katja; Hösel, Danny; Weihnacht, Volker; Leson, Andreas | Presentation |
| 2018 | Medical Device Manufacturing. Conference 2018 - Tagungsband
: Schneider, Urs (Hrsg.) | Conference Proceedings |
| 2017 | Self-optimizing production technologies
Klocke, Fritz; Abel, Dirk; Gries, Thomas; Hopmann, Christian; Loosen, Peter; Poprawe, Reinhard; Reisgen, Uwe; Schmitt, Robert; Schulz, Wolfgang; Abels, Peter; Adams, Oliver; Auerbach, Thomas; Buchholz, Guido; Döbbeler, Benjamin; Frank, Daniel; Heinisch, Julian; Hermanns, Torsten; Gloy, Yves-Simon; Keitzel, Gunnar; Kemper, Maximilian; Martel, Diana Suarez; Reimer, Viktor; Reiter, Matthias; Saggiomo, Marco; Schwenzer, Max; Stemmler, Sebastian; Stoyanov, Stoyan; Thombansen, Ulrich; Veselovac, Drazen; Willms, Konrad | Book Article |
| 2017 | SPH simulations of magnetorheological abrasive flow machining at a microscopic scale
Mohseni-Mofidi, S.; Nutto, C.; Lagger, H.; Bierwisch, C. | Conference Paper |
| 2016 | Improving performance of turn-milling by controlling forces and thermally induced tool-center point (TCP) displacement
Putz, Matthias; Ihlenfeldt, Steffen; Karaguzel, Umut; Semmler, Ulrich; Budak, Erhan; Bakkal, Mustafa; Wertheim, Rafael | Conference Paper, Journal Article |
| 2016 | Improving robotic machining accuracy through experimental error investigation and modular compensation
Schneider, Ulrich; Drust, Manuel; Ansaloni, Matteo; Lehmann, Christian; Pellicciari, Marcello; Leali, Francesco; Gunnink, Jan Willem; Verl, Alexander | Journal Article |
| 2016 | Modeling of heat fluxes during machining and their effects on thermal deformation of the cutting tool
Putz, Matthias; Schmidt, Gerhard; Semmler, Ulrich; Oppermann, Christian; Bräunig, Michael; Karagüzel, Umut | Journal Article, Conference Paper |
| 2016 | Slope-deviation measurement of Fresnel-shaped mold surfaces
Kiefel, P.; Hornung, T.; Nitz, P.; Reinecke, H. | Journal Article |
| 2016 | Zerspanung von Hartmetall mit definierter Schneide im unterbrochenen Schnitt
Ottersbach, Michael; Koch, Matthias | Conference Paper |
| 2015 | Analytical modelling methods for temperature fields in metal cutting based on panel method of fluid mechancis
Klocke, Fritz; Brockmann, Matthias; Gierlings, Sascha; Veselovac, Drazen; Roidl, Benedikt; Schmidt, Gerhard; Semmler, Ulrich; Kever, D. | Journal Article, Conference Paper |
| 2015 | Automatic pose optimization for robotic processes
Schneider, Ulrich; Diaz Posada, Julian Ricardo; Verl, Alexander | Conference Paper |
| 2015 | Challenge of machining aluminium matrix composites reinforced by diamonds
Schubert, Andreas; Zeidler, Henning; Flemming, Sebastian; Penzel, Michael; Krönert, Maik; Meichsner, Gunnar; Essel, Shai | Conference Paper |
| 2015 | Heat flux in cutting: Importance, simulation and validation
Putz, Matthias; Schmidt, Gerhard; Semmler, Ulrich; Dix, Martin; Brockmann, Matthias; Bräunig, Michael; Gierlings, Sascha | Journal Article, Conference Paper |
| 2015 | Implementation of various cooling strategies for machining in the dies and molds industry
Dix, Martin; Eckert, Udo; Wertheim, Rafael; Books, Baruch; Hochmuth, Carsten | Conference Paper |
| 2015 | Machining technologies for multi-materials
Gebhardt, Andreas; Vazquez Martinez, Hector; Mayer, Tim; Beckenlechner, Robert; Esch, Philipp | Conference Paper |
| 2014 | Einrichtung zur Kompensation thermisch bedingter Formänderungen mittels auxetischer Strukturen
Schmidt, Gerhard; Semmler, Ulrich; Hommola, Alexander | Study |
| 2014 | Enhanced oxidation resistance of ZrB2/SiC composite through in situ reaction of gadolinium oxide in patterned surface cavities
Gonzalez-Julian, Jesus; Cedillos-Barraza, Omar; Döring, Sven; Nolte, Stefan; Guillon, Olivier; Lee, William E. | Journal Article |
| 2014 | Fabrication of the magnetic circuit for the BIPM watt balance
Ellinghaus, Jan M.; Arneson, Dave; Brecher, Christian; Wenzel, Christian; Knapp, Byron; Kiss, Adrien; Lavergne, Thomas; Stock, Michael | Conference Paper |
| 2014 | Practical comparison between the finite-element and mesh-free calculation methods in the analysis of machinig simulations
Vazquez Martinez, Hector | Presentation |
| 2013 | Experimental investigation of sources of error in robot machining
Schneider, Ulrich; Ansaloni, Matteo; Drust, Manuel; Leali, Francesco; Verl, Alexander | Abstract |
| 2013 | Experimental investigation of sources of error in robot machining
Schneider, Ulrich; Ansaloni, Matteo; Drust, Manuel; Leali, Francesco; Verl, Alexander | Conference Paper |
| 2013 | Finishing of polycrystalline diamond tools by combining laser ablation with grinding
Brecher, Christian; Klocke, Fritz; Schindler, Florestan; Janssen, Andreas; Fischer, Bettina; Hermani, Jan-Patrick | Journal Article |
| 2013 | Offline path compensation to improve accuracy of industrial robots for machining applications
Lehmann, Christian; Halbauer, Marcel; Zwaag, Johnny van der; Schneider, Ulrich; Berger, Ulrich | Conference Paper |
| 2013 | Position control of an industrial robot using an optical measurement system for machining purposes
Schneider, Ulrich; Diaz Posada, Julian Ricardo; Drust, Manuel; Verl, Alexander | Conference Paper |
| 2013 | Simulation with plastic material models for high thermomechanical loads
Vazquez Martinez, Hector | Presentation |
| 2012 | Development of roadmaps for cost minimisation of titanium machining for aerospace applications
Dimitrov, Dimitri; Neugebauer, Reimund; Treppe, Frank; Schmidt, Gerhard; Treunicht, N.; Blaine, D.; Saxer, M. | Conference Paper |
| 2012 | Durchgängige CAx-Prozessketten
Glasmacher, Lothar; Schug, Pascal; Mallok, Monika | Book Article |
| 2012 | Increasing the accuracy for a piezo-actuated micro manipulator for industrial robots using model-based nonlinear control
Olofsson, Björn; Sörnmo, Olof; Schneider, Ulrich; Barho, Marc; Robertsson, Anders; Johansson, Rolf | Conference Paper |
| 2012 | Increasing the milling accuracy for industrial robots using a piezo-actuated high-dynamic micro manipulator
Sörnmo, Olof; Olofsson, Björn; Schneider, Ulrich; Robertsson, Anders; Johansson, Rolf | Conference Paper |
| 2012 | Thermal interactions between the process and workpiece
Neugebauer, Reimund; Drossel, Welf-Guntram; Ihlenfeldt, Steffen; Richter, Carsten | Conference Paper |
| 2011 | Characterization of tool wear in high-speed milling of hardened powder metallurgical steels
Klocke, Fritz; Arntz, Kristian; Cabral, Gustavo Francisco; Stolorz, Martin; Busch, Marc | Journal Article |
| 2011 | Fräswerkzeug- und Prozessparameterauswahl - Wirtschaftlichkeit durch Anpassung an die Bearbeitungsaufgabe
Stolorz, Martin; Busch, Marc | Journal Article |
| 2011 | Interaction of boron suboxide with compacted graphite cast iron. Short communication
Freemantle, C.S.; Johnson, O.T.; Sigalas, I.; Herrmann, M. | Journal Article |
| 2011 | Velocity effects in metal forming and machining processes
Neugebauer, Reimund; Bouzakis, K.-D.; Denkena, B.; Klocke, F.; Sterzing, A.; Tekkaya, A. Erman; Wertheim, R. | Conference Paper, Journal Article |
| 2010 | 3-D-piezo-compensation mechanism for error compensation enables high-accurate robot machining processes
Puzik, Arnold; Meyer, Christian; Verl, Alexander | Conference Paper |
| 2010 | 3D-piezo-compensation-mechanism for online-error-compensation of robots
Puzik, Arnold | Conference Paper |
| 2010 | High performance machining of selected titanium alloys for aerospace applications
Neugebauer, Reimund; Dimitrov, D.; Oosthuizen, G.; Schmidt, G.; Treurnicht, N.; Blaine, D. | Conference Paper |
| 2010 | Simulation of workpiece deformation caused by machining and clamping forces
Neugebauer, Reimund; Vogel, E.; Hochmuth, C.; Schmidt, G.; Nebel, D. | Conference Paper |
| 2009 | Al2O3 tools towards effective machining of wood-based materials
Gogolewski, P.; Klimke, J.; Krell, A.; Beer, P. | Journal Article |
| 2009 | Industrial robots for machining processes in combination with an additional actuation mechanism for error compensation
Puzik, Arnold; Pott, Andreas; Meyer, Christian; Verl, Alexander | Conference Paper |
| 2009 | Microscale mass production
Brecher, C.; Weinzierl, M.; Niehaus, F.; Schmitt, R.; Köllmann, D. | Journal Article |
| 2008 | Energieeffiziente Werkzeugmaschine - Ein Baustein für energieeffiziente Produktion
Neugebauer, Reimund; Blau, P.; Wabner, M. | Conference Paper |
| 2008 | Interaction between machining and new fixturing principles for aerospace structures
Leopold, J.; Poppitz, A.; Klärner, M.; Schmidt, A.-K.; Berger, J. | Conference Paper, Journal Article |
| 2008 | Processing with parallel kinematics - an experimental analysis
Neugebauer, Reimund; Wabner, M.; Ihlenfeldt, S. | Journal Article, Conference Paper |
| 2007 | Modelling, simulations and experimental verification of size effects in burr formation
Dix, M.; Leopold, J.; Neugebauer, Reimund | Conference Paper |
| 2006 | Boron containing combination tool coatings - characterization and application tests
Keunecke, M.; Bewilogua, K.; Wiemann, E.; Weigel, K.; Wittorf, R.; Thomsen, H. | Journal Article |
| 2003 | Modeling for machine tool optimized manufacture
Markworth, L.; Straube, A.; Glasmacher, L. | Conference Paper |
| 2003 | Simultaneous five-axis-machining of complex shaped parts
Klocke, F.; Markworth, L.; Glasmacher, L. | Conference Paper |
| 2002 | Characterization of miniaturized tensile specimens using micromagnetic techniques
Rösner, H.; Meyendorf, N. | Conference Paper |
| 2002 | Modeling of difficult to cut materials
Knodt, S.; Markworth, L.; Reinhardt, M. | Conference Paper |
| 2002 | Modeling of TiAl6V4 machining operations
Klocke, F.; Markworth, L.; Messner, G. | Conference Paper |
| 2001 | Influences on structure formation at the cutting edge with abrasive waterjets
Henning, A.; Westkämper, E.; Friedrich, R.; Ditzinger, T.; Kübler, T.; Radons, G. | Conference Paper |
| 2001 | Machining components made of advanced ceramics: Prospects and trends
Bausch, S.; Schmidt, C.; Sinnhoff, V. | Journal Article |
| 2000 | Machinability of IPS empress 2 framework ceramic. Potential for ceramic dentures
Schmidt, C.; Weigl, P. | Journal Article |
| 2000 | Shaping of IPS empress 2 framework ceramic by grinding
Schmidt, C.; Weigl, P. | Conference Paper |
| 1998 | Bauweisen, Komponenten und Eigenschaften von Werkzeugmaschinen des 21. Jahrhunderts
Neugebauer, Reimund; Harzbecker, C.; Nestmann, S.; Schwaar, M. | Conference Paper |
| 1997 | Form based force-control for finishing processes
Westkämper, E.; Hoffmeister, H.-W.; Michel, S. | Conference Paper |
| 1994 | Bearbeitung und Charakterisierung von Bauteilen aus Hochleistungskeramik
Reiter, H.; Netzelmann, U.; Wagemann, A.; Verlemann, E.; Hollstein, T.; Pfeiffer, W. | Conference Paper |
| 1994 | Charakterisierung von bearbeiteten Keramikoberflächen mittels akustischer Rastermikroskopie.
Pangraz, S.; Arnold, W.; Weides, G. | Conference Paper |
| 1993 | Anwendungsorientierte NC-Programmierung für Verdichterlaufräder.
Hupfer, H.; Reddig, H.-J.; Wojcik, L. | Journal Article |
| 1991 | Werkzeugmaschinen im CIM-Verbund
Steinhilper, R. | Conference Paper |
| 1990 | Influence of machining-induced residual stresses on the strength of ceramics
Pfeiffer, W. | Conference Paper |
| 1989 | Vier Positionen genügen. Generierung von Bearbeitungsprogrammen für IR
Höpf, M. | Journal Article |