Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Combined and Fast Computable Thermal Models for Situationally Optimal Tempering of Machine Tool Components
Weber, Juliane; Glänzel, Janine; Popken, Jens; Shabi, Linart; Weber, Jürgen
Journal Article, Conference Paper
2019Deduction of time-dependent machine tool characteristics by fuzzy-clustering
Frieß, Uwe; Kolouch, Martin; Putz, Matthias
Conference Paper
2019HoloPort - 3D-Sensor for machine tools
Seyler, Tobias; Engler, Johannes
Conference Paper
2019Hybrid modeling of thermo-elastic behavior of a three-axis machining center using integral deformation sensors
Brecher, Christian; Lee, Tae Hun; Tzanetos, Filippos; Zontar, Daniel
Journal Article, Conference Paper
2018Ein Beitrag zur Modellierung des thermischen Umgebungseinflusses an Werkzeugmaschinen
Brecher, Christian; Kneer, Reinhold; Spierling, Robert; Frekers, Yona; Fey, Marcel
Journal Article
2018Bewertung konstruktiver und kompensatorischer Maßnahmen zur thermo-sensitiven Auslegung von Werkzeugmaschinenstrukturen
Regel, Joachim
: Putz, M.; Neugebauer, R.
Dissertation
2018Design framework for model-based self-optimizing manufacturing systems
Thombansen, Ulrich; Buchholz, Guido; Frank, Daniel; Heinisch, Julian; Kemper, Maximilian; Pullen, Thomas; Reimer, Viktor; Rotshteyn, Grigory; Schwenzer, Max; Stemmler, Sebastian; Abel, Dirk; Gries, Thomas; Hopmann, Christian; Klocke, Fritz; Poprawe, Reinhart; Reisgen, Uwe; Schmitt, Robert
Journal Article
2018Design of a photogrammetric measurement system for displacement and deformation on machine tools
Riedel, Mirko; Deutsch, Jessica; Müller, Jens; Ihlenfeldt, Steffen
Conference Paper
2018Digital engineering Industrie 4.0 for machine tools and production equipment
Koriath, Hans-Joachim; Hoffmann, Michael; Langer, Tino
Journal Article
2018Efficient quantification of free and forced convection via the decoupling of thermo-mechanical and thermo-fluidic simulations of machine tools
Glänzel, Janine; Ihlenfeldt, Steffen; Naumann, Christian; Putz, Matthias
Journal Article
2018Enhancement and analysis of multidimensional characteristic diagrams for correction of TCP-displacements caused by thermal tool displacement
Putz, Matthias; Oppermann, Christian; Bräunig, Michael
Journal Article, Conference Paper
2018Extensive microstructural quality control inside a machine tool using multiwavelength digital holography
Seyler, Tobias; Fratz, Markus; Beckmann, Tobias; Bertz, Alexander; Carl, Daniel; Grün, Viktor; Börret, Rainer; Ströer, Felix; Seewig, Jörg
Conference Paper
2018Functional integration - structure-integrated wireless sensor technology targeting smart mechanical engineering applications
Rülke, Steffen; Beyer, Volkhard; Zorn, Wolfgang; Meinig, Marco; Wecker, Julia; Reuter, Danny; Deicke, Frank; Clausner, André; Werner, Thomas
Conference Paper
2018Fuzzy-clustering of machine states for condition monitoring
Frieß, Uwe; Kolouch, Martin; Friedrich, Axel; Zander, Andreas
Journal Article
2018Identification of modal parameters of machine tools during cutting by operational modal analysis
Berthold, Jan; Kolouch, Martin; Wittstock, Volker; Putz, Matthias
Journal Article, Conference Paper
2018Machine tools: 12 points - catching complexity in ecodesign
Hettesheimer, Tim; Rohde, Clemens; Waide, Paul
Conference Paper
2018The methods for controlled thermal deformations in machine tools
Kuznetsov, Alexandr P.; Koriath, Hans-Joachim; Dorozhko, Alexey O.
Conference Paper
2018On the Selection and Assessment of Input Variables for the Characteristic Diagram Based Correction of Thermo-Elastic Deformations in Machine Tools
Ihlenfeldt, Steffen; Naumann, Christian; Putz, Matthias
Conference Paper
2018Online-Korrektur für thermisch-bedingte Fehler bei Werkzeugmaschinen
Tzanetos, Filippos; Lowis, Steffen
Journal Article
2018Präzise Fertigung von Großbauteilen
Ohlenforst, Markus; Wennemer, Matthias; Behrens, Jan; Peterek, Martin
Book Article
2017Application of substructure techniques to predict cutting stability for mobile machine tools
Rentzsch, Hendrik; Kolouch, Martin; Putz, Matthias
Journal Article, Conference Paper
2017Decoupling of fluid and thermo-elastic simulations on machine tools using characteristic diagrams
Glänzel, Janine; Ihlenfeldt, Steffen; Naumann, Christian; Putz, Matthias
Journal Article, Conference Paper
2017Flexibilisierung von Maschinenbedienern mit mobilen Endgeräten - Smartes Informationssystem als Erweiterung der klassischen Maschinensteuerung
Lindner, Florian; Permin, Eike; Schmitt, Robert; Gesthuysen, Frederik
Journal Article
2017Self-optimizing thermal correction
Ihlenfeldt, Steffen; Hellmich, Arvid; Thiem, Xaver
Presentation
2016Adaptronic applications in cutting machines
Drossel, Welf-Guntram; Bucht, Andre; Pagel, Kenny; Mäder, Thomas; Junker, Tom
Journal Article, Conference Paper
2016Application of substructure decoupling techniques to predict mobile machine tool dynamics: Numerical investigations
Law, Mohit; Rentzsch, Hendrik; Ihlenfeldt, Steffen; Putz, Matthias
Journal Article, Conference Paper
2016Approach for a general pose-dependent model of the dynamic behavior of large lightweight machine tools for vibration reduction
Apprich, Stefanie; Wulle, Frederik; Lechler, Armin; Pott, Andreas; Verl, Alexander
Journal Article, Conference Paper
2016Broadband excitation of machine tools by cutting forces for performing operational modal analysis
Berthold, Jan; Kolouch, Martin; Wittstock, Volker; Putz, Matthias
Journal Article, Conference Paper
2016Characteristic diagram based correction algorithms for the thermo-elastic deformation of machine tools
Naumann, Christian; Ihlenfeldt, Steffen; Priber, Ulrich; Riedel, Ilka
Journal Article, Conference Paper
2016Comparison of experimental modal analysis with operational modal analysis for assessment of the dynamic behaviour of a machine tool component
Berthold, Jan; Kolouch, Martin; Wittstock, Volker; Putz, Matthias
Presentation
2016Cost-efficient approach for impulse decoupled linear direct drives
Drossel, Welf-Guntram; Junker, Tom; Schmidt, Stefan; Pagel, Kenny
Journal Article
2016Evaluation of shape memory alloy bulk actuators for wear compensation in ball screw drives
Drossel, Welf-Guntram; Junker, Tom; Bucht, Andre; Navarro Y De Sosa, Iñaki; Pagel, Kenny
Conference Paper
2016Investigation of the time-invariance and causality of a machine tool for performing operational modal analysis
Putz, Matthias; Wittstock, Volker; Kolouch, Martin; Berthold, Jan
Journal Article, Conference Paper
2016Multi-level energy demand optimizer system for machine tool controls
Schlechtendahl, Jan; Eberspächer, Philipp; Schraml, Philipp; Verl, Alexander; Abele, Eberhard
Journal Article, Conference Paper
2016Produkt- und Prozessbewertung im Leichtbau
Lindner, Florian; Schmitt, Robert; Peters, Tido
Journal Article
2015A frequency-based substructuring approach to efficiently model position-dependent dynamics in machine tools
Law, Mohit; Ihlenfeldt, Steffen
Journal Article
2015Laser polishing of metallic freeform surfaces
Kumstel, J.; Flemmer, J.; Temmler, A.
Conference Paper
2015Modelling of thermal interactions between environment and machine tool
Neugebauer, Reimund; Ihlenfeldt, Steffen; Zwingenberger, Carsten; Glänzel, Janine; Richter, Carsten
Book Article
2014Design of a ball screw drive wear compensation using shape memory alloy actuators
Junker, Tom; Bucht, Andre; Navarro Y De Sosa, Iñaki; Pagel, Kenny; Drossel, Welf-Guntram
Conference Paper
2014Einrichtung zur Kompensation thermisch bedingter Formänderungen mittels auxetischer Strukturen
Schmidt, Gerhard; Semmler, Ulrich; Hommola, Alexander
Study
2014Modeling the orientation-dependent dynamics of machine tools with gimbal heads
Law, Mohit; Grossi, N.; Scippa, A.; Phani, A.S.; Altintas, Yusuf
Conference Paper
2014Nichtinvasive Identifikation von Regelstreckenparametern einer Werkzeugmaschine
Hellmich, Arvid; Hofmann, Stefan; Hipp, Kevin; Schlegel, Holger; Drossel, Welf-Guntram
Conference Paper
2014Nichtinvasive Identifikation von Regelstreckenparametern für elektromechanische Achsen
Hellmich, Arvid
Dissertation
2013A deformation model of a parallel kinematic machine tool
Neugebauer, Reimund; Kolouch, Martin
Journal Article
2013Improving maintenance services for machine tools by integrating specific software functions
Uhlmann, Eckart; Otto, Franz; Geisert, Claudio
Conference Paper
2013Machine tools for large parts
Uriarte, L.; Zatarain, M.; Axinte, D.; Yagüe-Fabra, J.; Ihlenfeldt, Steffen; Eguia, J.; Olarra, A.
Journal Article, Conference Paper
2013Verbesserung des dynamischen Verhaltens von Vorschubantrieben durch semiaktive Dämpfung
Frey, Siegfried
: Verl, Alexander (Hauptberichter)
Dissertation
2013Virtual-Reality-gestützte Kinematik- und Materialabtragssimulation für Fräsmaschinen mittels Hardware-in-the-Loop
Klimant, Philipp
Dissertation
2012Model updating of machine tools
Neugebauer, Reimund; Kolouch, Martin; Richter, Markus; Wittstock, Volker; Saha, S.N.
Conference Paper, Journal Article
2012New high-speed machine tool structure by holistic mechatronic systems design
Neugebauer, Reimund; Ihlenfeldt, Steffen; Frieß, Uwe; Wabner, Markus; Rauh, Stefan
Conference Paper
2011Advanced calculation of static and dynamic stiffness in mechatronic machine tools
Neugebauer, Reimund; Scheffler, Christian; Wabner, Markus; Zwingenberger, Carsten
Journal Article
2011Lightweight components for energy-efficient machine tools
Kroll, Lothar; Blau, Peter; Wabner, Markus; Frieß, Uwe; Eulitz, Jan; Klärner, Matthias
Journal Article
2011Machining with redundant kinematics
Neugebauer, Reimund; Drossel, W.-G.; Ihlenfeldt, S.; Rentzsch, H.
Conference Paper
2011State space modeling of non-proportional passive damping in machine tools
Neugebauer, Reimund; Scheffler, C.; Wabner, M.; Schulten, M.
Journal Article
2011Structure principles of energy efficient machine tools
Neugebauer, Reimund; Wabner, Markus; Rentzsch, Hendrik; Ihlenfeldt, Steffen
Journal Article
2010Advanced state space modeling of non-proportional damped machine tool mechanics
Neugebauer, Reimund; Scheffler, C.; Wabner, M.; Schulten, M.
Journal Article
2010Approach for the Development of Energy-Efficient Machine Tools
Neugebauer, Reimund; Frieß, U.; Paetzold, J.; Wabner, M.; Richter, M.
Conference Paper, Journal Article
2010Business model innovation paths and success in the machine tool industry
Copani, G.; Marvulli, S.; Lay, G.; Biege, S.; Buschak, D.
Conference Paper
2010CFK-Querbalken einer TRUMPF-Laserschneidanlage
Meltke, R.
Book Article
2010Challenges for the metall cutting industryversus shortage of ressources
Neugebauer, Reimund; Wertheim, R.; Harzbecker, C.; Hochmuth, C.; Schubert, A.; Ihlenfeldt, S.
Conference Paper
2010Condition Monitoring at Machine Tools
Neugebauer, Reimund; Fischer, J.
Conference Paper, Journal Article
2010Condition-based preventive maintenance of main spindles
Neugebauer, Reimund; Fischer, J.; Praedicow, M.
Journal Article
2010Control concept for piezo-based actuator-sensor-units for uniaxial vibration damping in machine tools
Neugebauer, Reimund; Pagel, K.; Bucht, A.; Wittstock, V.; Pappe, A.
Journal Article
2010Correlation between feed velocity and preloading in ball screw drives
Verl, Alexander; Frey, Siegfried
Journal Article
2010Development approaches for energy efficient machine tool structures
Neugebauer, Reimund; Wabner, M.; Rentzsch, H.; Scheffler, C.; Kolesnikov, A.
Conference Paper
2010An extended procedure for convective boundary conditions on transient thermal simulations of machine tools
Neugebauer, Reimund; Ihlenfeldt, S.; Zwingenberger, C.
Journal Article
2010Integrated laser cell for combined laser cladding and milling
Nowotny, S.; Muenster, R.; Scharek, S.; Beyer, E.
Journal Article
2010A new method for compensation of static deformations of a machine tool
Neugebauer, Reimund; Kolouch, M.
Conference Paper
2010Softwareseitige Entwicklung eines Condition-Monitoring-Demonstrators unter Berücksichtigung der Besonderheiten von Werkzeugmaschinen
Tisztl, M.
Thesis
2010VR-tools for the development of energy-efficient products
Neugebauer, Reimund; Wittstock, V.; Glänzel, J.; Paetzold, M.; Schumann, M.; Mayer, A.
Conference Paper
2010Zustandsraummodellierung nicht-proportional gedämpfter Systeme in der mechatronischen Simulation
Neugebauer, Reimund; Scheffler, C.; Wabner, M.; Schulten, M.
Journal Article
2009Damping of spindle vibrations by active magnetic bearing
Neugebauer, Reimund; Böttcher, R.; Hanisch, H.; Keller, H.; Wabner, M.
Presentation
2009Development of efficient milling technology using integrated process simulation
Neugebauer, Reimund; Harzbecker, C.; Ihlenfeldt, S.; Hochmuth, C.; Wabner, M.; Hoyer, K.
Conference Paper
2009Discussion of key parameters and methods for comparison of energy needs of machine tools
Neugebauer, Reimund; Wabner, M.; Koch, T.; Drossel, W.-G.
Presentation
2009Microscale mass production
Brecher, C.; Weinzierl, M.; Niehaus, F.; Schmitt, R.; Köllmann, D.
Journal Article
2009Real time error compensation integrating open control system and laser interferometer
Essmann, J.; Uhlmann, E.
Conference Paper
2009Thermokompensation mit Aktoren aus Formgedächtnislegierungen
Schuster, F.
Thesis
2008Active component and control design for torsional mode vibration reduction for a parallel kinematic machine tool structure
Neugebauer, Reimund; Wittstock, V.; Bucht, A.; Illgen, A.
Conference Paper
2008Design, modeling and functionality allocation in mechatronic production systems
Neugebauer, Reimund; Drossel, W.-G.; Ihlenfeldt, S.; Wabner, M.
Conference Paper
2008Einbeziehung des Bearbeitungsprozesses in die Modellbildung zum Betriebsverhalten von Fertigungsmaschinen mit Parallelkinematiken
Neugebauer, Reimund; Ihlenfeldt, S.; Leopold, J.; Hoyer, K.; Wabner, M.
Book Article
2008Energieeffiziente Werkzeugmaschine - Ein Baustein für energieeffiziente Produktion
Neugebauer, Reimund; Blau, P.; Wabner, M.
Conference Paper
2008Potential of manipulating the damping properties of parallel kinematic machine tools
Wabner, M.; Grzejszczyk, S.; Neugebauer, Reimund
Journal Article, Conference Paper
2008Processing with parallel kinematics - an experimental analysis
Neugebauer, Reimund; Wabner, M.; Ihlenfeldt, S.
Journal Article, Conference Paper
2007Adhesion in sandwiches with aluminum foam core
Neugebauer, Reimund; Hipke, T.; Hohlfeld, J.; Lies, C.
Journal Article
2007Approach for simulating ball bearing screws in thermal finite element
Gleich, S.
Journal Article
2007Mechatronic systems for machine tools
Neugebauer, Reimund; Denkena, B.; Wegener, K.
Conference Paper
2007Metal foams - from research object to serial application
Hipke, T.
Conference Paper
2007Reactive trajectory splitting function for machine tools with hierarchical drive structures
Schröder, T.; Krabbes, M.; Neugebauer, Reimund
Journal Article
2007Ultraprecise compact five-axes grinding machine
Brecher, C.; Utsch, P.; Wenzel, C.
Conference Paper
2006The 3rd generation of an actuator-sensor-unit for tripod structures
Wittstock, V.; Illgen, A.; Neugebauer, Reimund; Kranz, B.; Naumann, G.
Conference Paper
2006Active and passive tool alignment in ultraprecision machining for the manufacturing of highly precise structures
Brecher, C.; Weinzierl, M.; Lange, S.C.; Peschke, C.
Journal Article
2006Herstellen von Sandwiches mit Aluminiumschaumkern
Lies, C.
Thesis
2006Mechatronic components for machine tools
Neugebauer, Reimund; Wabner, M.; Ihlenfeldt, S.; Wittstock, V.
Conference Paper
2006Mechatronic systems for machine tools XVII workshop on supervising and diagnostics of machining systems
Neugebauer, Reimund; Wabner, M.
Conference Paper
2006Piezo-based actuator-sensor-units for uniaxial vibration reduction in machine tools
Neugebauer, Reimund; Wittstock, V.; Illgen, A.; Naumann, G.
Journal Article
2006Self-calibration of a redundantly actuated parallel kinematic machine tool
Ecorchard, G.; Maurine, P.; Neugebauer, Reimund
Conference Paper
2006Simulating air flows for chip removal in dry machining
Neugebauer, Reimund; Wieland, P.; Harzbecker, C.
Conference Paper
2006Virtual Reality in der Werkzeugmaschinenindustrie
Neugebauer, Reimund; Weidlich, D.; Zickner, H.
Journal Article
2006Virtual reality solutions for the design of machine tools in practice
Zickner, H.; Neugebauer, Reimund; Weidlich, D.
Conference Paper
2006A virtual reality-based engineering tool for fast configuration of machine tools with parallel kinematics - VRAx®
Neugebauer, Reimund; Weidlich, D.; Ihlenfeldt, S.; Zickner, H.; Hensel, S.; Polzin, T.
Conference Paper
2005Anwendungen von Piezokompositen zur Schwingungsdämpfung
Drossel, W.-G.; Kunze, H.; Kranz, B.
Presentation
2005Positionsbezogene Bahnplanung zur optimalen Ausnutzung der Dynamik parallelkinematischer Maschinen
Otto-Adamczak, T.; Schröder, T.
Journal Article, Conference Paper
2004Kooperative Fertigungsstrukturen im Umfeld des Werkzeugmaschinenbaus
Niemann, J.; Stierle, T.; Westkämper, E.
Journal Article
2002Modelling of process control in spin extrusion
Neugebauer, Reimund; Schwaar, M.; Hoffmann, M.; Glaß, R.
Journal Article
1999Modellgestützte Kompensation thermischer Verlagerungen an Werkzeugmaschinen
Harzbecker, C.; Nestmann, S.; Ullmann, M.
Journal Article
1998Bauweisen, Komponenten und Eigenschaften von Werkzeugmaschinen des 21. Jahrhunderts
Neugebauer, Reimund; Harzbecker, C.; Nestmann, S.; Schwaar, M.
Conference Paper