Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Nondestructive Testing with 3MA - An Overview of Principles and Applications
Wolter, Bernd; Gabi, Yasmine; Conrad, Christian
Journal Article
2018Effect of laser-beam and hybrid-laser-arc welding parameters and filler metal on microstructure and mechanical properties of thick heat-treated steel X8Ni9+QT640 for cryogenic service
El-Batahgy, A-M.; Gook, S.; Gumenyuk, A.; Rethmeier, M.
Conference Paper
2015Comment on "High-pressure spark plasma sintering (SPS) of transparent polycrystalline magnesium aluminate spinel (PMAS)" by M. Sokol, S. Kalabukhov, M. P. Dariel, N. Frage [J. Eur. Ceram. Soc. 34 (2014) 4305]
Krell, Andreas
Journal Article
2015Effect of cubic boron nitride grain size in the reinforcing of α-Sialon ceramics sintered via SPS
Garrett, Jethro C.; Sigalas, Iakovos; Wolfrum, Anne-Kathrin; Herrmann, Mathias
Journal Article
2015Influence of composition on the wear properties of boron carbonitride (BCN) coatings deposited by high power impulse magnetron sputtering
Hirte, T.; Feuerfeil, R.; Perez-Solorzano, V.; Wagner, T.A.; Scherge, M.
Journal Article, Conference Paper
2015Laser and hybrid laser-arc welding of cryogenic 9%Ni steel for construction of LNG storage tanks
Gook, Sergej; Forquer, Matthew; Gumenyuk, Andrey; Rethmeier, Michael; El-Batahgy, Abdel-Monem
Conference Paper
2015Nanostructured WC-Co hardmetal as reference material for high hardness range
Aleksandrov Fabijanić, Tamara; Alar, Željko; Pötschke, Johannes
Conference Paper
2015Simulation und experimentelle Validierung von Temperaturen, Härtegut und Eigenspannungen bei der induktiven Wärmebehandlung
Schweizer, F.; Asperheim, J.-I.; Stiele, H.-J.
Journal Article
2014Aluminum oxide from trimethylaluminum and water by atomic layer deposition: The temperature dependence of residual stress, elastic modulus, hardness and adhesion
Ylivaara, O.M.E.; Liu, X.; Kilpi, L.; Lyytinen, J.; Schneider, D.; Laitinen, M.; Julin, J.; Ali, S.; Sintonen, S.; Berdova, M.; Haimi, E.; Sajavaara, T.; Ronkainen, H.; Lipsanen, H.; Koskinen, J.; Hannula, S.-P.; Puurunen, R.L.
Journal Article
2014Mechanical properties of hot-pressed boron suboxide with chromium boride additive
Ogunmuyiwa, Enoch N.; Johnson, Oluwagbenga T.; Sigalas, Iakovos; Herrmann, Mathias; Afolabi, Ayo Samuel
Conference Paper
2013Boron suboxide ultrahard materials
Herrmann, M.; Sigalas, I.; Thiele, M.; Kleebe, H.-J.; Michaelis, A.; Müller, M.M.
Journal Article
2013cBN reinforced Y-alpha-SiAlON composites
Garrett, J.C.; Sigalas, I.; Herrmann, M.; Olivier, E.J.; O'Connell, J.H.
Journal Article
2013Direct laser interference patterning of planar and non-planar steels and their microstructural characterization
Bieda, M.; Schmädicke, C.M.; Wetzig, A.; Lasagni, A.
Journal Article
2013Investigation of binderless WC-TiC-Cr3C2 hard materials prepared by spark plasma sintering (SPS)
Qiao, Z.; Räthel, J.; Berger, L.-M.; Herrmann, M.
Journal Article
2012Diamond-ceramics composites - New materials for a wide range of challenging applications
Herrmann, M.; Matthey, B.; Höhn, S.; Kinski, I.; Rafaja, D.; Michaelis, A.
Journal Article
2012Fabrication and evaluation of SixNy coatings for total joint replacements
Olofsson, J.; Pettersson, M.; Teuscher, N.; Heilmann, A.; Larsson, K.; Grandfield, K.; Persson, C.; Jacobson, S.; Engqvist, H.
Journal Article
2012In situ synthesis of titanium matrix composite (Ti-TiB-TiC) through sintering of TiH2-B4C
Jimoh, Abdul; Sigalas, Iakovos; Herrmann, Mathias
Journal Article
2010Fatigue strength evaluation of linear flow split profile sections based on hardness distribution
Landersheim, V.; Jöckel, M.; Dsoki, C. el; Bruder, T.; Hanselka, H.
Conference Paper
2009Iridium coatings with titanium sub-layer deposited by RF magnetron sputtering
Hagen, J.; Burmeister, F.; Fromm, A.; Manns, P.; Kleer, G.
Journal Article, Conference Paper
2009Liquid phase assisted densification of superhard B6O materials
Herrmann, M.; Raethel, J.; Bales, A.; Sempf, K.; Sigalas, I.; Hoehn, M.
Journal Article
2008Effect of wafer bonding and layer splitting on nanomechanical properties of standard and strained SOI films
Tapily, K.; Baumgart, H.; Gu, D.; Elmustafa, A.; Krause, M.; Petzold, M.
Conference Paper
2008Industrial applications of 3MA - Micromagnetic multiparameter microstructure and stress analysis
Dobmann, G.; Altpeter, I.; Wolter, B.; Kern, R.
Conference Paper
2008Industrial applications of 3MA - Micromagnetic multiparameter microstructure and stress analysis
Dobmann, G.; Altpeter, I.; Wolter, B.; Kern, R.
Conference Paper
2007Microstructure and properties of hot-pressed (Hf, Ti) C
Heiligers, C.; Herrmann, M.; Sigalas, I.J.; Neethling, J.H.
Journal Article
2007Microstructure, hardness and cavitation erosion behaviour of Ti-6Al-4V laser nitrided under different gas atmospheres
Kaspar, J.; Bretschneider, J.; Jacob, S.; Bonß, S.; Winderlich, B.; Brenner, B.
Journal Article
2006Characterization of copper precipitates in Fe-Cu alloys using micromagnetic NDE techniques
Pirlog, M.; Altpeter, I.; Dobmann, G.; Breme, J.
Conference Paper
2006Influence of different interlayers and bias voltage on the properties of a-C:H and a-C:H:Me coatings prepared by reactive d.c. magnetron sputtering
Weber, M.; Bewilogua, K.; Thomsen, H.; Wittorf, R.
Journal Article
2006NDE for material characterisation of ageing due to thermal embrittlement, fatigue and neutron degradation
Dobmann, G.
Journal Article
2005Static and fatigue properties of high strength PM-steels
Sigl, L.S.; Delarbre, P.; Lipp, K.; Sonsino, C.M.
Conference Paper
2005Structure and properties of titanium oxide layers deposited by reactive plasma activated electron beam evaporation
Modes, T.; Scheffel, B.; Metzner, C.; Zywitzki, O.; Reinhold, E.
Journal Article, Conference Paper
2004Comparison of hardness and Young's modulus by single indentation and multiple unloading indentation
Schiffmann, K.I.; Küster, R.
Journal Article
2004DLC based coatings prepared by reactive d.c. magnetron sputtering
Bewilogua, K.; Wittorf, R.; Thomsen, H.; Weber, M.
Conference Paper, Journal Article
2004Materials based on nanosized beta-Si3N4 composite powders
Herrmann, M.; Schulz, I.; Zalite, I.
Journal Article, Conference Paper
2004NDE for material characterization of aging due to thermal embrittlement, fatigue and neutron degradation
Dobmann, G.
Conference Paper
2004Structure and properties of crystalline titanium oxide layers deposited by reactive pulse magnetron sputtering
Zywitzki, O.; Modes, T.; Sahm, H.; Frach, P.; Goedicke, K.; Gloss, D.
Conference Paper, Journal Article
2001Eddy Current and Micro Magnetic On-Line Prediction of Mechanical Properties
Dobmann, G.
Conference Paper
2001High-strength steels in welded state for lightweight constructions under high and variable stress peaks
Demofonti, G.; Riscifuli, S.; Sonsino, C.M.; Kaufmann, H.; Sedlacek, G.; Müller, C.; Hanus, F.; Wegmann, H.G.
Book
2001Nanoindentation hardness of submicrometer alumina ceramics
Krell, A.; Schädlich, S.
Journal Article
2001Referenzproben für Härteprüfung an Hochleistungskeramiken
Reich, T.; Ullner, C.; Polzin, T.
Journal Article
2000Process integration. A challenge for eddy current and micro-magnetic NDT
Dobmann, G.
Journal Article
1999Fatigue strength of spot welded stainless steel components for railway carriages under operational loading conditions. Final report
: Budano, S.; Salvini, P.; Vivio, F.; Rupp, A.
Report
1998Evaluation of stiffness, hardness and adhesion of thin films
Schädlich, S.; Schneider, D.; Schultrich, B.
Conference Paper
1998Höhere Abtragsleistungen beim Schleifen
Krell, A.
Journal Article
1998The hollow cathode. A high-performance tool for plasma-activated deposition
Morgner, H.; Neumann, M.; Straach, S.; Krug, M.
Conference Paper
1998A new look at grain size and load effects in the hardness of ceramics
Krell, A.
Journal Article
1998A new look at the influences of load, grain size, and grain boundaries on the room temperature hardness of ceramics
Krell, A.
Journal Article
1998Optimization of process parameters for induction heat treating by means of numerical simulation
Schöpfel, A.; Störzel, K.
Conference Paper
1998PM looks forward to pump impeller role
Sonsino, C.M.; Zieschang, R.; Arnhold, V.; Hofmann, B.; Gonia, D.; Sandritter, K.H.
Journal Article
1998Ein Verfahren zur Bemessung elektronenstrahlgehärteter Randschichten unter Wälzbeanspruchung
Schöpfel, A.
Dissertation
1997Bedeutung der Porosität für die Eigenschaften von Gipserhärtungsprodukten
Sattler, H.
Journal Article
1997Beschichtungen zur Verminderung der Umweltbelastung bei Umformprozessen
Taube, K.
Conference Paper
1997Beschichtungen zur Verminderung der Umweltbelastung bei Umformprozessen
Taube, K.; Straehler, B.
Conference Paper
1997Beschichtungen zur Verminderung der Umweltbelastung bei Umformprozessen. Teilvorhaben: Entwicklung und Charakterisierung geeigneter Schichtsysteme
Taube, K.
Report
1996Advances in the grinding efficiency of sintered alumina abrasives
Krell, A.; Blank, P.; Wagner, E.; Bartels, G.
Journal Article
1996Carbon-based coatings for dry sheet metal working
Taube, K.
Conference Paper
1996Dünne Schichten zerstörungsfrei prüfen
Schneider, D.; Schultrich, B.
Journal Article
1996Effects of grain size and humidity on fretting wear in fine-grained alumina, Al2O3/TiC, and zirconia
Krell, A.; Klaffke, D.
Journal Article
1996Improved hardness and hierarchic influences on wear in submicron sintered alumina
Krell, A.
Journal Article
1996Inverse hardness distribution and its influence on mechanical properties
Liscic, B.; Grubisic, V.; Totten, G.E.
Conference Paper
1996Process Integrated Nondestructive Testing for Evaluation of Hardness
Kröning, M.; Theiner, W.; Kern, R.; Bucher, B.; Meyer, R.; Wolf, H.
Conference Paper
1996Process integrated nondestructive testing of laser-hardened components
Kern, R.; Theiner, W.; Valeske, B.; Meyer, R.
Conference Paper
1995Chemical vapour deposition of polycrystalline diamond films on steel substrates
Schäfer, L.; Bluhm, A.; Sattler, M.; Six, R.; Klages, C.-P.
Conference Paper
1995Fortschritte für Hochleistungs-Aluminiumoxid
Krell, Andreas
Book Article
1995Grain Size Dependence of Hardness in Dense Submicrometer Al2O3
Krell, A.; Blank, P.
Journal Article
1995Herstellung und Eigenschaften von mit Laser erzeugten TiC- und TiB2-Dispersionsschichten auf Stahl und Aluminiumlegierungen
Fischer, D.; Löschau, W.
Conference Paper
1995Hierarchy of micromechanical influences on friction and wear of submicron alumina and zirconia ceramics
Krell, A.; Klaffke, D.
Conference Paper
1995Load Dependence of Hardness in Sintered Submicrometer Al2O3 and ZrO2
Krell, A.
Journal Article
1995Preparation of cubic boron nitride films by use of electrically conductive boron carbide targets
Lüthje, H.; Bewilogua, K.; Daaud, S.; Johansson, M.; Hultmann, L.
Journal Article
1995Sintered alumina - hard and strong like hot-pressed Al2O3/TiC-composites
Krell, A.; Blank, P.
Conference Paper
1995Sputter deposition of cubic boron nitride films
Bewilogua, K.; Schütze, A.; Kouptsidis, S.; Lüthje, H.
Conference Paper
1994Deposition of low energy coatings with DLC-like properties
Grischke, M.; Trojan, K.; Dimigen, H.
Conference Paper
1994Fatigue design for PM components. Manual for design and production engineers.
Esper, F.J.; Sonsino, C.M.
Book
1994Herstellung titankarbidhaltiger Verschleißschichten durch Laserbestrahlung vorbeschichteter Stahloberflächen
Juch, K.; Löschau, W.
Journal Article
1994Improvement of carbon-based coatings for use in the cold forming of non-ferrous metals
Taube, K.; Grischke, M.; Bewilogua, K.
Conference Paper
1994Zerstörungsfreie Bestimmung der Einhärtungstiefe nach dem Randschichthärten mit mikromagnetischen Prüfverfahren. Beispiel: Laserhärten
Kern, R.; Theiner, W.; Bergmann, H.W.; Müller, D.; Damaschek, R.; Rudlaff, T.; Bloehs, W.
Journal Article
1993Al2O3 and ZrO2 composites with high TiC contents fabricated by tailoring oxide powders.
Krell, A.; Blank, P.
Book Article
1993Materialprüfung verschiedener Reineisensorten
Grussenmeyer, A.
Book
1993Preparation, properties and structure of metal containing amorphous hydrogenated carbon films
Grischke, M.; Bewilogua, K.; Dimigen, H.
Journal Article
1993Werkstoffcharakterisierung mit magnetischen Methoden
Altpeter, I.
Conference Paper
1992Diamond membrane based X-ray masks
Löchel, B.; Huber, H.-L.; Klages, C.-P.; Schäfer, L.; Bluhm, A.
Conference Paper
1992Effect of siloxane infiltration of green samples on properties of RBSN
Kleber, S.; Weiß, H.-J.
Journal Article
1992Einfluß von Kaltverformung und Rekristallisationsglühung auf Reinkupfer.
Grussenmeyer, A.
Book
1992Härte- und Eigenspannungsmessungen an Niederdruckturbinenschaufeln
Stücker, E.; Theiner, W.
Conference Paper
1992Measurement of mechanical properties of thin solid films -hardness, elasticity, stress-
Taube, K.
Conference Paper
1991Growth conditions, structure and properties of amorphous hydrogenated carbon films prepared by ion plating
Bewilogua, K.; Rau, B.
Conference Paper
1991Microstructure and wear behaviour of metal-containing diamond-like coatings
Dimigen, H.; Klages, C.-P.
Journal Article, Conference Paper
1990Charakterisierung von Rauchgas- und Natur-Rohgipsen. Ein Beitrag zur Entsorgung von Gips aus Rauchgas-Entschwefelungsanlagen
Roggendorf, H.; Hurbanic, M.
Journal Article
1990Surface melting of AlSi10Mg with Co2 laser radiation
Backes, G.; Gasser, A.; Kreutz, E.W.; Ollier, B.; Pirch, N.; Rozsoki, M.; Wissenbach, K.
Conference Paper
1988Characterization of hardening depth by Barkhausen noise measurement
Bach, G.; Goebbels, K.; Theiner, W.A.
Journal Article
1988Nondestructive residual stress- and hardness-evaluation at weldments by means of 3MA. Micromagnetic- multiparameter-, microstructure- and stress-analysis
Dobmann, G.; Reimringer, B.; Theiner, W.
Conference Paper
1987ND determination of grinding defects using the 3MA prototype device
Conrad, R.; Jonck, R.; Reimringer, B.; Theiner, W.
Conference Paper