Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2018Technology-based assessment of subtractive machining processes for mold manufacture
Klink, Andreas; Arntz, Kristian; Johannsen, Lars; Holsten, Maximilian; Chrubasik, Lothar; Winands, Kai; Wollbrink, Moritz; Bletek, Thomas; Gerretz, Vincent; Bergs, Thomas
Journal Article, Conference Paper
2017Adaptive grinding p rocess - prevention of thermal damage using OPC-UA technique and in situ metrology
Steffan, Matthias; Haas, Franz; Pierer, Alexander; Gentzen, Jens
Journal Article
2013Finishing of polycrystalline diamond tools by combining laser ablation with grinding
Brecher, Christian; Klocke, Fritz; Schindler, Florestan; Janssen, Andreas; Fischer, Bettina; Hermani, Jan-Patrick
Journal Article
2012CVD diamond grinding tools for precision grinding of hard and brittle materials
Brinksmeier, E.; Riemer, O.; Antsupov, G.; Rickens, K.; Meiners, K.; Gäbler, J.
Conference Paper
2012Manufacture and application performance of precision grinding wheels with CVD coated abrasive layers
Brinksmeier, E.; Riemer, O.; Antsupov, G.; Meiners, K.; Gäbler, J.
Journal Article
2011Improving dental grinding technology
Ben-Hanan, Uri; Regev, Michael; Braun, Orit; Konvalina, Peter; Judes, Herb
Presentation
2011IR-based temperature measurement in rotational grinding of sapphire wafers
Klocke, Fritz; Kuljanic, Elso; Dambon, Olaf; Sortino, M.; Herben, Maurice; Totis, G.
Conference Paper
2011Maschinenintegrierte Messtechnik für die Herstellung von Diamantschneidwerkzeugen
Fleischle, David; Berger, Reinhard; Lyda, Wolfram; Sobotka, Andreas; Osten, Wolfgang
Conference Paper
2011Polieren im Werkzeugbau - von manuellen Prozessstrategien zur automatisierten Feinbearbeitung
Behrens, Barbara
Book Article
2010Integrated Process Chain for Glass Moulding of Freeform Surfaces
Klocke, Fritz; Dambon, Olaf; Hollstegge, Daniel; Bresseler, Bernd
Conference Paper
2010Theoretical and experimental analysis of SiC dry grinding while reducing momentarily engaging cutting edges
Azarhoushang, Bahman; Tawakoli, Taghi; Westkämper, Engelbert
Conference Paper
2007Bahngesteuertes Schleifen von Schweißteilen für kerbfreie Oberflächen
Pott, Andreas
Conference Paper
2007Influence of the type of coolant lubricant in grinding with CBN tools
Tawakoli, Taghi; Westkämper, Engelbert; Rabiey, Mohammad; Rasifard, Abdolreza
Journal Article
2007Modelling and simulation of nozzle guide vanes considering mechanic-thermal loads of grinding
Klärner, M.
Thesis
2007A new development in dry grinding
Tawakoli, Taghi; Westkämper, Engelbert; Rabiey, Mohammad
Conference Paper
2007Ultraprecise compact five-axes grinding machine
Brecher, C.; Utsch, P.; Wenzel, C.
Conference Paper
2007Ultrasonic assisted dressing of vitrified CBN grinding wheel
Tawakoli, Taghi; Westkämper, Engelbert; Rasifard, Abdolreza
Conference Paper
2006Crystallographic anisotropy of wear on a polycrystalline diamond surface
El-Dasher, B.S.; Gray, J.J.; Tringe, J.W.; Biener, J.; Hamza, A.V.; Wild, C.; Wörner, E.; Koidl, P.
Journal Article
2005Novel precision and micro grinding tools made by chemical vapour deposition of diamond
Gäbler, J.; Schäfer, L.; Pleger, S.
Conference Paper
2005Verfahrenskombination Außenrundschleifen - Induktionshärten
Neugebauer, Reimund; Gentzen, J.
Book Article
2004Anwendungspotenziale der Verfahren Schleifen, Superfinishen und Glattwalzen
Neugebauer, Reimund; Gentzen, J.
Book Article
2002Challenging the sun - high-throughput surface structuring in solar cell manufacture
Weck, M.; Leifhelm, B.
Journal Article
2002Reliability of thinned silicon ICs
Landesberger, C.; Bollmann, D.; Klink, G.; Bock, H.; Reichl, H.
Conference Paper
2001High throughput surface structuring in solar cell manufacture
Weck, M.; Leifhelm, B.
Conference Paper
2001Machining components made of advanced ceramics: Prospects and trends
Bausch, S.; Schmidt, C.; Sinnhoff, V.
Journal Article
2000CVD diamond tools - fabrication methods and tool applications
Schäfer, L.; Gäbler, J.
Conference Paper
2000Machinability of IPS empress 2 framework ceramic. Potential for ceramic dentures
Schmidt, C.; Weigl, P.
Journal Article
1999Trockenschleifen mit keramisch gebundenen Korundschleifkörpern
Voll, M.
Journal Article
1998Coatings give machine tools a harder edge
Schäfer, L.; Lüthje, H.
Journal Article
1998Diamantbeschichtete Werkzeuge für die Präzisionsbearbeitung
Matthee, T.; Schäfer, L.
Journal Article
1995Cutting fluids in grinding of advanced ceramics
Spur, G.; Brücher, T.
Conference Paper
1995Diamantschichten mit kontrollierter Rauhigkeit - Untersuchung der funktionellen Eigenschaften rauher Diamantschichten
Bluhm, A.; Matthee, T.; Sattler, M.; Schäfer, L.
Conference Paper
1995Ductile grinding of ultraprecise aspherical optical lenses
Klocke, F.; Sinhoff, V.
Conference Paper
1995Kühlschmierung beim Keramikschleifen
Spur, G.; Brücher, T.
Conference Paper
1991Influence of grinding on near-surface regions of high-strength ceramics. Characterization by X-ray diffraction and effect on strength.
Pfeiffer, W.
Book Article
1990Influence of machining-induced residual stresses on the strength of ceramics
Pfeiffer, W.
Conference Paper
1988Wafer slicing by internal diameter sawing
Steffens, K.; König, W.; Struth, W.
Conference Paper
1987Fabrication, process characterization and properties of mechanically alloyed amorphous NiNb
Petzoldt, F.; Scholz, B.; Kunze, H.-D.
Abstract

 

<