Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2021The role of lubricant and carbon surface in achieving ultra- and superlow friction
Weihnacht, Volker; Makowski, Stefan
Book Article
2020Dry deep drawing of aluminum for automotive production
Prieske, Markus; Börner, Richard; Berger, Thomas; Kühn, Ralf; Scholz, Peter; Schubert, Andreas; Müller, Roland; Vollertsen, Frank
Journal Article
2020Early deformation mechanisms in the shear affected region underneath a copper sliding contact
Haug, C.; Ruebling, F.; Kashiwar, A.; Gumbsch, P.; Kübel, C.; Greiner, C.
Journal Article
2020Effect of environment on microstructure evolution and friction of Au-Ni multilayers
Cihan, E.; Jungjohann, K.; Argibay, N.; Chandross, M.; Dienwiebel, M.
Journal Article
2020Towards programmable friction: Control of lubrication with ionic liquid mixtures by automated electrical regulation
Gatti, F.; Amann, T.; Kailer, A.; Baltes, N.; Rühe, J.; Gumbsch, P.
Journal Article
2020Tribological Analysis of Contacts Between Glass and Tungsten Carbide Near the Glass Transition Temperature
Chizhik, Petr; Friedrichs, Marcel; Dietzel, Dirk; Schirmeisen, André
Journal Article
2019Extremely smooth. How smooth surfaces enable dry and boundary lubricated forming of aluminum
Flegler, F.; Groche, P.; Abraham, T.; Bräuer, G.
Conference Paper
2019Friction and Deformation Behavior of Elastomers
Adam, Alexander; Paulkowski, Dominik; Mayer, Bernd
Journal Article
2019Positive effect of laser structured surfaces on tribological performance
Stark, Tobias; Alamri, Sabri; Aguilar-Morales, Alfredo Ismael; Kiedrowski, Thomas; Lasagni, Andrés-Fabián
Journal Article
2018Effect of contact area on friction force in sheet metal forming operations
Mousavi, Ali; Sperk, Theresa; Gietzelt, Tobias; Kunze, Tim; Lasagni, Andrés-Fabián; Brosius, Alexander
Conference Paper
2018The origin of surface microstructure evolution in sliding friction
Greiner, C.; Liu, Z.; Schneider, R.; Pastewka, L.; Gumbsch, P.
Journal Article
2018Report on the seismic performance of three-dimensional moment-resisting timber frames with frictional damping in beam-to-column connections
Polocoser, T.; Leimcke, J.; Kasal, B.
Journal Article
2017Modelling of contact interfaces using non-homogenous discrete elements to predict dynamical behaviour of assembled structures
Sharma, Anuj
Dissertation
2017Nonsmooth contact dynamics for the large-scale simulation of granular material
Kleinert, Jan; Simeon, Bernd; Dreßler, Klaus
Journal Article
2017Study on friction and wear reducing surface micro-structures for a positive displacement pump handling highly abrasive shale oil
Janssen, Andreas; Pindeo, Bihotz; Igartua, Amaya; Liiskmann, Guido; Sexton, Leo
Journal Article
2016Contact area of rough spheres: Large scale simulations and simple scaling laws
Pastewka, L.; Robbins, M.O.
Journal Article
2016Influence of Microstructures on Tribological Systems - Development of Process and Surface Structure
Regel, Gerhard; Putz, Matthias; Blau, Peter; Hochmuth, Carsten; Frieß, Uwe; Fiedler, Maik
Journal Article, Conference Paper
2016The influence of the initial near-surface microstructure and imposed stress level on the running-in characteristics of lubricated steel contacts
Brink, A.; Lichtenberg, K.; Scherge, M.
Journal Article
2016Modelling cumulative effects of dry contact and laminate structure on dynamical behavior of the assembled structures
Sharma, Anuj; Mueller-Hirsch, Wolfgang; Herold, Sven; Melz, Tobias
Journal Article, Conference Paper
2016Tribological investigation of silicon-modified DLC coatings for the dry forming of aluminium alloys
Abraham, T.; Bräuer, G.; Kretz, F.; Groche, P.
Conference Paper
2015Elektrisch leitfähige Schmierstoffe für adaptive Tribosysteme - Motivation und Synthese von leitfähigen Schmierstoffen
Kailer, A.; Altmann, P.; Grundei, S.; Schubert, T.; Ahrens, M.; Dornhöfer, G.; Dellwo, U.
Conference Paper
2015Friction and wear of TiN-Si3N4 nanocomposites against ShKh15 steel
Kolesnichenko, V.G.; Zgalat-Lozynskii, Ostap; Varchenko, V.T.; Herrmann, Mathias; Ragulya, Andrey
Journal Article
2015Influence of composition on the wear properties of boron carbonitride (BCN) coatings deposited by high power impulse magnetron sputtering
Hirte, T.; Feuerfeil, R.; Perez-Solorzano, V.; Wagner, T.A.; Scherge, M.
Journal Article, Conference Paper
2015Laser surface graphitization to control friction of diamond-like carbon coatings
Komlenok, Maxim S.; Kononenko, Vitali V.; Zavedeev, Evgeny V.; Frolov, Vadim D.; Arutyunyan, Natalia R.; Chouprik, Anastasia A.; Baturin, Andrey S.; Scheibe, Hans-Joachim; Shupegin, Mikhail L.; Pimenov, Sergei M.
Journal Article
2015Microscale study of frictional properties of graphene in ultra high vacuum
Marchetto, D.; Feser, T.; Dienwiebel, M.
Journal Article
2014Adaptronic form honing - Manufacturing methods for compensating cylinder bore distortions
Neugebauer, Reimund; Hochmuth, Carsten; Schneider, Rene
Conference Paper
2014Atomic scale mechanisms of friction reduction and wear protection by graphene
Klemenz, A.; Pastewka, L.; Balakrishna, S.G.; Caron, A.; Bennewitz, R.; Moseler, M.
Journal Article
2014Electron microscopic evidence for a tribologically induced phase transformation as the origin of wear in diamond
Zhang, X.; Schneider, R.; Müller, E.; Mee, M.; Meier, S.; Gumbsch, P.; Gerthsen, D.
Journal Article
2014Modular tool concept and process design for micro impact extrusion
Schubert, Andreas; Jahn, Stephan F.; Müller, Benedikt
Journal Article
2014Nichtinvasive Identifikation von Regelstreckenparametern für elektromechanische Achsen
Hellmich, Arvid
Dissertation
2014Realisierung und Nachweis der Energieeffizienz in Anlagen der technischen Logistik
Bergmann, A.; Stryhal, Z.; Weise, S.; Strobel, J.; Wolf, Klaus; Lüdemann, L.; Schreiter, M.; Naumann, M.
Conference Paper
2014Reibenergieverteilungen von Mahlkugelkontakten
Köster, Alexander; Scherge, Matthias; Teipel, Ulrich
Journal Article
2014Taming the untamable - The art and science of diamond polishing
Moseler, M.; Pastewka, L.
Book Article
2013Dental tribology at the microscale
Scherge, M.; Sarembe, S.; Kiesow, A.; Petzold, M.
Journal Article
2013Development of an alternative heating method for manganese boron steel
Bester, Alwyn
Dissertation
2013Influence of structural variations on imidazolium-based ionic liquids
Dold, C.; Amann, T.; Kailer, A.
Journal Article
2013Influences on the FEM-results of different parameters of the rotating straightening process
Kreiseler, Graziella
Conference Paper
2013Low-friction, wear-resistant aluminum-silicon cylinder bore surfaces
Rehl, A.; Klimesch, C.; Scherge, M.
Journal Article
2013On the validity of the method of reduction of dimensionality: Area of contact, average interfacial separation and contact stiffness
Lyashenko, I.A.; Pastewka, L.; Persson, B.N.J.
Journal Article
2013Reibungsarme und verschleissfeste Aluminium-Silizium-Zylinderlaufflächen
Rehl, A.; Klimesch, C.; Scherge, M.
Journal Article
2013Running-in due to material transfer of lubricated steel/PA46 (aliphatic polyamide) contacts
Scherge, M.; Kramlich, J.; Böttcher, R.; Hoppe, T.
Journal Article
2013Seeing the third-body formation of metallic tribosystems by novel on-line tribometry
Dienwiebel, M.; Feser, T.; Korres, S.; Gola, M.
Abstract
2013Superlubric to stick-slip sliding of incommensurate graphene flakes on graphite
Wijk, M.M. van; Dienwiebel, M.; Frenken, J.W.M.; Fasolino, A.
Journal Article
2013Tribochemical effects during running-in of metals and alloys
Dienwiebel, M.; Feser, T.; Stoyanov, P.
Conference Paper
2012Adaptronic form honing - manufacturing methods for compensating cylinder bore distortions
Neugebauer, Reimund; Hochmuth, Carsten; Schneider, Rene
Presentation
2012Electric potentials effects on friction between silicon carbide surfaces in aqueous solutions
Lu, H.; Amann, T.; Kailer, A.
Conference Paper
2012Fabrication and evaluation of SixNy coatings for total joint replacements
Olofsson, J.; Pettersson, M.; Teuscher, N.; Heilmann, A.; Larsson, K.; Grandfield, K.; Persson, C.; Jacobson, S.; Engqvist, H.
Journal Article
2012Rheological characterization of ionic liquids and ionic liquid crystals with promising tribological performance
Amann, T.; Dold, C.; Kailer, A.
Journal Article
2011Influence of electric potentials on the tribological behaviour of silicon carbide
Kailer, A.; Amann, T.; Krummhauer, O.; Herrmann, M.; Sydow, U.; Schneider, M.
Conference Paper, Journal Article
2011Preparation of a-C:H/a-C:H:Si:O and a-C:H/a-C:H:Si multilayer coatings by PACVD
Bewilogua, K.; Bialuch, I.; Ruske, H.; Weigel, K.
Journal Article
2011Simulation of the stopping behavior of industrial robots using a complementarity-based approach
Dietz, Thomas; Verl, Alexander
Conference Paper
2011Structuring of tribological active surfaces for reduction of frictional losses
Schubert, A.; Edelmann, J.; Sylla, D.; Hackert-Oschätzchen, M.
Conference Paper
2010Friction of flat-flat micro contacts coated with amorphous carbon
Paulkowski, D.; Bandorf, R.; Schiffmann, K.; Bräuer, G.
Journal Article
2010Instrumented Compaction Experiments under Varied Climatic Conditions
Klemm, U.; Schöne, B.; Svoboda, H.; Fries, M.; Nebelung, M.
Journal Article
2010New characterization methods for the assessment and the design of friction optimized surfaces
Gröger, S.; Burkhardt, T.; Eckert, U.; Kühn, C.
Conference Paper
2010Simulation of the stopping behavior of industrial robots
Dietz, Thomas; Pott, Andreas; Verl, Alexander
Conference Paper
2010Structural analysis method for optimized design of complex kinematic structures using static and dynamic models and application to a robotic walking simulator
Brüning, M.; Hussein, S.; Schmidt, H.; Krüger, J.
Journal Article
2009Ultralow friction and wear of reciprocating systems lubricated by liquid crystalline fluids
Kailer, A.; Amann, T.; Konrath, G.; Janietz, D.; Sawade, H.
Conference Paper
2008Influence of friction and process parameters on the specific cutting force and surface characteristics in micro cutting
Weber, M.; Autenrieth, H.; Kotschenreuther, J.; Gumbsch, P.; Schulze, V.; Löhe, D.; Fleischer, J.
Journal Article
2008ta-C beschichtete Werkzeuge für die Trockenumformung von Aluminiumblechen
Weihnacht, V.; Brückner, A.; Bräunling, S.
Journal Article
2007Calibration of atomic force microscope for nanoscale friction measurements
Masalska, A.; Kolanek, K.; Woszczyna, M.; Zawierucha, P.; Ritz, Y.; Zschech, Ehrenfried
Conference Paper
2007Comment on "viscosity measurement by cylindrical compression for numerical modeling of precision lens molding process"
Richter, F.; Hoffmann, H.-J.
Journal Article
2005Ceramic rolls for wires
Kailer, A.; Hollstein, T.
Conference Paper
2005Flexibles Greiferkonzept für Roboter
Wohlfahrt, A.
Journal Article
2005Reibschlüssige Greifsysteme für die automatische Handhabung im Materialfluss
Wohlfahrt, A.
Journal Article
2004Einsatz keramischer Schneidstoffe in der Stanztechnik
Schober, R.; Loibl, D.
Journal Article
2004Investigating ultra-thin lubricant layers using lateral atomic force acoustic microscopy
Reinstädtler, M.; Rabe, U.; Hirsekorn, S.; Arnold, W.; Goldade, A.V.; Kasai, T.; Bhushan, B.
Conference Paper
2004Phenomena in microwear experiments on metal-free and metal-containing diamond-like carbon coatings: Friction, wear, fatigue and plastic
Schiffmann, K.
Journal Article
2004Reibungs und Verschleißverhalten von a-C:H-Schichten unter mediengeschmierten Bedingungen
Klaffke, D.; Hartelt, M.; Brand, J.; Brand, C.; Wittorf, R.
Journal Article
2003DLC for tools protection in warm massive forming
Reisel, G.; Wielage, B.; Steinhäuser, S.; Hartwig, H.
Conference Paper, Journal Article
2003On the nanoscale measurement of friction using atomic-force microscope cantilever torsional resonances
Reinstaedtler, M.; Rabe, U.; Scherer, V.; Hartmann, U.; Goldade, A.; Bhushan, B.; Arnold, W.
Journal Article
2003Plasma treatment of polymers for surface and adhesion improvement
Hegemann, D.; Brunner, H.; Oehr, C.
Journal Article, Conference Paper
2002Atomic force microscopy at ultrasonic frequencies
Arnold, W.; Hirsekorn, S.; Kopycinska, M.; Rabe, U.; Reinstädtler, M.; Scherer, V.
Conference Paper
2001Correlation of nanomechanical and nanotribological behavior of thin DLC coatings on different substrates
Staedler, T.; Schiffmann, K.
Journal Article
2001Novel equipment for friction force measurement on MEMS and micro components
Schmidt, M.; Wortmann, A.; Lüthje, H.; Büttgenbach, S.
Conference Paper
2000CVD diamond tools - fabrication methods and tool applications
Schäfer, L.; Gäbler, J.
Conference Paper
2000Effect of target material on deposition and properties of metal-containing DLC (Me-DLC) coatings
Bewilogua, K.; Cooper, C.V.; Specht, C.; Schröder, J.; Wittorf, R.; Grischke, M.
Conference Paper, Journal Article
2000Erratum to: Effect of target material on deposition and properties of metal-containing DLC (Me-DLC) coatings
Bewilogua, K.; Cooper, C.V.; Specht, C.; Schröder, J.; Wittorf, R.; Grischke, M.
Journal Article
2000Harte Kohlenstoffschichten für tribologische Anwendungen
Brand, J.; Schäfer, L.
Conference Paper
2000Tribologie
Reschke, S.
Journal Article
1999Development and applications of hot-filament CVD diamond tools
Schäfer, L.; Brophy, S.; Mulcahy, S.; Gäbler, J.
Conference Paper
1999Harte kohlenstoffbasierte Schichten - innovative Werkstoffe der Zukunft
Schäfer, L.; Brand, J.
Conference Paper
1997Beschichtungen zur Verminderung der Umweltbelastung bei Umformprozessen
Taube, K.
Conference Paper
1997Beschichtungen zur Verminderung der Umweltbelastung bei Umformprozessen
Taube, K.; Straehler, B.
Conference Paper
1997Beschichtungen zur Verminderung der Umweltbelastung bei Umformprozessen. Teilvorhaben: Entwicklung und Charakterisierung geeigneter Schichtsysteme
Taube, K.
Report
1997Position adjustment - From manual tapping to computer-aided control
Siebenhaar, C.; Guyenot, V.
Conference Paper
1996Adjustment of micro-optical components by a carefully measured tapping. An intelligent driving method
Siebenhaar, C.; Guyenot, V.
Conference Paper
1996Carbon-based coatings for dry sheet metal working
Taube, K.
Conference Paper
1996Effects of grain size and humidity on fretting wear in fine-grained alumina, Al2O3/TiC, and zirconia
Krell, A.; Klaffke, D.
Journal Article
1996Grundlagen für die Dimensionierung von schrumpfgeklebten Welle-Nabe-Verbindungen
Tersch, H.
Report
1996Improved hardness and hierarchic influences on wear in submicron sintered alumina
Krell, A.
Journal Article
1996Präzises Positionieren mittels intelligenter Schlagwerke
Siebenhaar, C.; Guyenot, V.
Conference Paper
1994Deposition of low energy coatings with DLC-like properties
Grischke, M.; Trojan, K.; Dimigen, H.
Conference Paper
1994High dose and intense implantation of the multiply charged Al plus n, Ti plus n and C plus n into alfa-iron
Pogrebnjak, A.D.; Bakharev, O.G.; Martynenko, V.A.; Rudenko, V.A.; Brusa, R.; Zecca, A.; Ryssel, H.; Tikhomirov, I.A.; Ryabchikov, A.I.; Öchsner, R.
Journal Article
1994Improvement of carbon-based coatings for use in the cold forming of non-ferrous metals
Taube, K.; Grischke, M.; Bewilogua, K.
Conference Paper
1993Finite element analysis of indentation experiments
Olaf, J.M.
Book Article
1993Finite element analysis of indentation experiments in surfaces and surface coated materials
Olaf, J.M.; Scheer, C.
Journal Article
1993Improvement of surface properties of polymers by ion implantation
Öchsner, R.; Kluge, A.; Zechel-Malonn, S.; Gong, L.; Ryssel, H.
Journal Article
1993Methoden zur Optimierung von Festigkeit und Lebensdauer thermisch gespritzter Werkstoffverbunde
Pantucek, P.
Conference Paper
1993Verschleiß durch kombinierte Scher- und Druckbeanspruchung.
Geißler, A.
Conference Paper
1992Öl-Luftschmierung von Wälzlagern
Spur, G.; Göke, U.
Journal Article
1992Polymers with high-energy substituents - Polyesters containing azidomethyl groups
Keicher, T.; Wasmann, F.W.
Conference Paper
1992Reduction of friction and wear by ion-implanted carbonized photoresit
Bogen, S.; Gyulai, J.; Kluge, A.; Öchsner, R.; Ryssel, H.
Conference Paper
1992Reduction of friction and wear by ion-implanted carbonized photoresit
Bogen, S.; Gyulai, J.; Kluge, A.; Öchsner, R.; Ryssel, H.
Conference Paper
1992Reibbeanspruchte Materialien für Reinraumanwendungen
Kaun, R.
Conference Paper
1992Tribological characterization of hard carbon films prepared by laser-arc
Klaffke, D.; Scheibe, H.J.
Conference Proceedings
1991Microstructure and wear behaviour of metal-containing diamond-like coatings
Dimigen, H.; Klages, C.-P.
Journal Article, Conference Paper
1991Reinraumtauglichkeit von Materialien
Kaun, R.
Conference Paper
1990Molecular structure of the ideal solid propellant binder
Stacer, R.G.
Conference Paper
1987Tribological and electrical properties of metal‐containing hydrogenated carbon films
Dimingen, H.; Hübsch, H.; Memming, R.
Journal Article
1980Frictional properties of diamondlike carbon layers
Enke, K.; Dimingen, H.; Hübsch, H.
Journal Article