Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Assessing the structural integrity of carbon-fibre sandwich panels in fire: Bench-scale approach
Schartel, B.; Humphrey, J.K.; Gibson, A.G.; Hörold, A.; Trappe, V.; Gettwert, Volker
Journal Article
2019Fatigue behavior of non-optimized laser-cut medical grade Ti-6AL-4V-ELI sheets and the effects of mechanical post-processing
Reck, André; Zeuner, André Till; Zimmermann, Martina
Journal Article
2018Assessment of test methods for thick and thin layer adhesive joints under high rates of loading
Paul, Hanna; Ledford, Noah; Sauer, Martin; May, Michael; Okamura, Masahiro
Journal Article
2018Fracture ab initio: A force-based scaling law for atomistically informed continuum models
Möller, J.J.; Bitzek, E.; Janisch, R.; Hassan, H. ul; Hartmaier, A.
Journal Article
2018In-situ X-ray microscopy of crack-propagation to study fracture mechanics of on-chip interconnect structures
Kutukova, Kristina; Liao, Zhongquan; Werner, Stephan; Guttmann, Peter; Standke, Yvonne; Gluch, Jürgen; Schneider, Gerd; Zschech, Ehrenfried
Journal Article
2017Investigations into the damage mechanisms of glass fiber reinforced polypropylene based on micro specimens and precise models of their microstructure
Fliegener, S.; Kennerknecht, T.; Kabel, M.
Journal Article
2017Investigations on the spall and delamination behavior of UHMWPE composites
Lässig, Torsten; Bagusat, Frank; Pfändler, Siegfried; Gulde, Max; Heunoske, Dominic; Osterholz, Jens; Stein, Werner; Nahme, Hartwig; May, Michael
Journal Article
2015Atomistic aspects of fracture
Bitzek, E.; Kermode, J.R.; Gumbsch, P.
Journal Article
2014Modeling and testing the mechanical strength of solar cells
Kaule, F.; Wang, W.; Schoenfelder, S.
Journal Article
2014Predictive modeling of damage and failure in adhesively bonded metallic joints using cohesive interface elements
May, M.; Voß, H.; Hiermaier, S.
Journal Article
2014Strength characterization of tubular ceramic materials by flexure of semi-cylindrical specimens
Kwok, K.; Kiesel, L.; Frandsen, H.L.; Søgaard, M.; Hendriksen, P.V.
Journal Article
2013Mechanisms of dislocation multiplication at crack tips
Bitzek, E.; Gumbsch, P.
Journal Article
2013Screened empirical bond-order potentials for Si-C
Pastewka, L.; Klemenz, A.; Gumbsch, P.; Moseler, M.
Journal Article
2012Anticrack-type fracture in brittle foam under compressive stress
Heierli, J.; Gumbsch, P.; Sherman, D.
Journal Article
2012Bond order potentials for fracture, wear, and plasticity
Pastewka, L.; Mrovec, M.; Moseler, M.; Gumbsch, P.
Journal Article
2011Electromagnetism as a means for understanding materials mechanics phenomena in magnetic materials
Boller, Christian; Altpeter, Iris; Dobmann, Gerd; Rabung, Madalina; Schreiber, J.; Szielasko, Klaus; Tschuncky, Ralf
Journal Article
2011Special Issue on 'Multiaxial fatigue models': Selected papers from the 9th International Conference on Multiaxial Fatigue and Fracture (ICMFF9), held in Parma, Italy, on 7-9 June 2010
Sonsino, C.M.; Carpinteri, A.; Pook, L.P.
Journal Article
2009Al2O3 tools towards effective machining of wood-based materials
Gogolewski, P.; Klimke, J.; Krell, A.; Beer, P.
Journal Article
2009Influence of cyclic loading and temperature on integrity of piezoceramic patch transducers
Gall, M.; Thielicke, B.
Conference Paper
2008Atomistic simulations of dislocation - crack interaction
Bitzek, E.; Gumbsch, P.
Journal Article
2007Fracture strength of SOI springs in MEMS micromirrors
Hsu, S.-T.; Wolter, A.; Owe, W.-D.; Schenk, H.
Conference Paper
2006Interatomic potentials and the simulation of fracture: C15 NbCr2
Rösch, F.; Trebin, H.-R.; Gumbsch, P.
Conference Paper, Journal Article
2006Selected papers from the 7th International Conference on Biaxial/Multiaxial Fatigue and Fracture (ICBMFF), held in Berlin (Germany), on 28 June to 1 July 2004
Sonsino, C.M.; Zenner, H.; Carpinteri, A.; Pook, L.P.
Journal Article
2006Shot peening of hard chromium coatings. Damage or benefit?
Pfeiffer, W.; Blug, B.; Wenzel, J.
Conference Paper
2005Modelling of the failure behaviour of windscreens and component tests
Sun, D.-Z.; Andrieux, F.; Ockewitz, A.; Klamser, H.; Hogenmüller, J.
Conference Paper
2005Modelling of the failure behaviour of windscreens and component tests
Sun, D.-Z.; Andrieux, F.; Ockewitz, A.; Klamser, H.; Hogenmüller, J.
Conference Paper
2005Thermal activation of crack-tip plasticity: The brittle or ductile response of a stationary crack loaded to failure
Hartmaier, A.; Gumbsch, P.
Journal Article
2004Cleavage planes of icosahedral quasicrystals: A molecular dynamics study
Rösch, F.; Rudhart, C.; Gumbsch, P.
Conference Paper
2004Crack propagation in perfectly ordered and random tiling quasicrystals
Rudhart, C.; Trebin, H.-R.; Gumbsch, P.
Conference Paper
2004Discrete dislocation dynamics simulation of crack-tip plasticity
Hartmaier, A.; Gumbsch, P.
Book Article
2004From crystalline to glassy: Crack propagation modes in decagonal quasicrystals
Rudhart, C.; Gumbsch, P.; Trebin, H.-R.
Conference Paper
2003Atomistic modeling of mechanical behavior
Li, J.; Ngan, A.H.W.; Gumbsch, P.
Journal Article
2003Brittle fracture and the brittle-to-ductile transition of tungsten
Gumbsch, P.
Conference Paper, Journal Article
2003Crack propagation in quasicrystals
Rudhart, C.; Gumbsch, P.; Trebin, H.-R.
Book Article
2003Elementary mechanisms of brittle and semi-brittle fracture
Gumbsch, P.
Journal Article
2003Fracture strength of polysilicon at stress concentrations
Bagdahn, J.; Sharpe, W.N.; Jadaan, O.
Journal Article
2003Impulsive fracture of fused quartz and silicon crystals by nonlinear surface acoustic waves
Lehmann, G.; Lomonosov, A.M.; Hess, P.; Gumbsch, P.
Journal Article
2002Scaling relations for crack-tip plasticity
Hartmaier, A.; Gumbsch, P.
Journal Article
2001High-strength steels in welded state for lightweight constructions under high and variable stress peaks
Demofonti, G.; Riscifuli, S.; Sonsino, C.M.; Kaufmann, H.; Sedlacek, G.; Müller, C.; Hanus, F.; Wegmann, H.G.
Book
1998Betriebsfestigkeitsverhalten einer Auswahl von nichtrostenden Stählen für den Anlagen- und Waggonbau. Abschlußbericht
Müller, F.; Sonsino, C.M.
Book
1998Durability approval of leaf springs under operational loading
Fischer, G.; Streicher, M.; Grubisic, V.
Report
1998Schwingfestigkeit wetterfester Stähle nach 10- bis 20-jähriger Bewitterung
Sonsino, C.M.; Müller, F.
Report
1997Shear test for adhesion measurement of small structures
Schammler, G.; Buschick, K.; Hahn, R.; Reichl, H.
Conference Paper
1994Application of solid mechanics in the fields of microelectronics and micro system technology
Michel, B.; Sommer, J.-P.
Conference Paper
1994Micromechanical models for brittle and ductile fracture
Riedel, H.
Conference Paper
1994Ultimate properties of epoxy resins modified with a polysiloxane-polycaprolactone-blockcopolymer
Könczöl, L.; Döll, W.; Buchholz, U.; Mülhaupt, R.
Journal Article
1993Thermal shock fracture by laser irradiation.
Kirchhoff, G.
Book Article
1991On the mechanism of surface embrittlement of ductile thermoplastics by brittle surface layers
Könczöl, L.; Ediger, B.; Döll, W.
Conference Paper
1989Fractography and failure mechanisms of amorphous thermoplastics
Döll, W.
Book Article
1989Micromechanics of fracture under static and fatigue loading. Optical interferometry of crack tip craze zones
Könczöl, L.; Döll, W.
Book Article
1988The development of high temperatures in titanium alloys during fast fracture
Jagannadham, K.; Wilsdorf, H.G.F.; Kunze, H.-D.; Meyer, L.W.
Conference Proceedings