Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2020Computational assessment of the microstructure-dependent thermomechanical behaviour of AlSi12CuNiMg-T7 - methods and microstructure-based finite element analyses
Fischer, C.; Reichenbacher, A.; Metzger, M.; Schweizer, C.
Book Article
2019A coupled thermomechanical approach for finite element forming simulation of continuously fiber-reinforced semi-crystalline thermoplastics
Dörr, Dominik; Joppich, Tobias; Kugele, Daniel; Henning, Frank; Kärger, Luise
Journal Article
2018A continuum model for sintering processes incorporating elasticity effects
Stark, Sebastian; Neumeister, Peter
Journal Article
2018Hardwood rods glued into softwood using environmentally sustainable adhesives
Kaufmann, Marvin; Kolbe, Jana; Vallée, Till
Journal Article
2018Medical Device Manufacturing. Conference 2018 - Tagungsband
: Schneider, Urs (Hrsg.)
Conference Proceedings
2018Stress mapping by confocal raman spectroscopy on solar cells and modules
Beinert, Andreas J.; Büchler, A.; Romer, P.; Heinrich, M.; Schubert, M.C.; Aktaa, J.; Eitner, U.
Conference Paper
2017Analysis of the effect of TSV-induced stress on devices performance by direct strain and electrical measurements and FEA simulations
Kteyan, Armen; Mühle, Uwe; Gall, Martin; Sukharev, Valeriy; Radojcic, Riko; Zschech, Ehrenfried
Journal Article
2017Customized mandibular reconstruction plates improve mechanical performance in a mandibular reconstruction model
Gutwald, R.; Jaeger, R.; Lambers, F.M.
Journal Article
2017Implementierung eines Sintermodells in ANSYS
Stark, Sebastian; Neumeister, Peter
Presentation
2017Mechanical behavior of endodontically restored canine teeth: Effects of ferrule, post material and shape
Ausiello, P.; Ciaramella, S.; Martorelli, M.; Lanzotti, A.; Zarone, F.; Watts, D.C.; Gloria, A.
Journal Article
2017Process design for the shaping of sandwich sheets with sensor and actuator functionality
Nestler, Matthias; Hensel, Sebastian; Müller, Roland; Drossel, Welf-Guntram
Journal Article, Conference Paper
2016An alternative geometry for bolometer sensors for use at high operating temperatures
Meister, H.; Langer, H.; Schmitt, Stefan
Journal Article
2016Analysis of the effective thermoelastic properties and stress fields in silicon nitride based on EBSD data
Othmani, Y.; Böhlke, T.; Lube, T.; Fellmeth, A.; Chlup, Z.; Colonna, F.; Hashibon, A.
Journal Article
2016Investigation of turning elastomers assisted with cryogenic cooling
Putz, Matthias; Dix, Martin; Neubert, Mike; Schmidt, Gerhard; Wertheim, Rafael
Conference Paper, Journal Article
2016Novel approaches to determine thermomechanical materials data in advanced interconnect stacks
Zschech, Ehrenfried; Gall, Martin; Clausner, André; Sander, Christoph; Sukharev, Valeriy
Conference Paper
2015Novel sheet metal parts with sensor and actuator mode of operation
Drossel, Welf-Guntram; Schubert, Andreas; Nestler, Matthias; Hensel, Sebastian; Müller, Roland; Müller, Michael; Müller, Benedikt; Jahn, Stephan
Conference Paper
2015A viscoplastic-fatigue-creep damage model for tin-based solder alloy
Metais, Benjamin; Kabakchiev, Alexander; Maniar, Youssef; Guyenot, Michael; Metasch, René; Röllig, Mike; Rettenmeier, Philipp; Buhl, Patrick; Weihe, Stefan
Conference Paper
2014Adaptive multi-scale modeling of high velocity impact on composite panels
May, M.; Nossek, M.; Petrinic, N.; Hiermaier, S.; Thoma, K.
Journal Article
2014The effect of stent graft oversizing on radial forces considering nitinol wire behavior and vessel characteristics
Senf, Björn; Sachsen, Sandra von; Neugebauer, Reimund; Drossel, Welf-Guntram; Florek, Hans-Joachim; Mohr, Friedrich Wilhelm; Etz, Christian Daniel
Journal Article, Conference Paper
2014Functionally graded materials with a soft surface for improved indentation resistance
Ziegler, T.; Kraft T.
Journal Article
2014Investigation of the capability of flux of force oriented lattice structures for lightweight design
Teufelhart, Stefan
Conference Paper
2014Stent graft visualization and planning tool for endovascular surgery using finite element analysis
Sachsen, Sandra von; Senf, Björn; Burgert, Oliver; Meixensberger, Jürgen; Florek, Hans-Joachim; Mohr, Friedrich Wilhelm; Etz, Christian Daniel
Journal Article
2013Study of the influence of material and welding modeling on the residual stresses in longitudinal stiffeners
Nied, H.F.; Siegele, D.
Conference Paper
2013Unsymmetric three-layer laminate with soft core for photovoltaic modules
Weps, M.; Naumenko, K.; Altenbach, H.
Journal Article
2013Validation of density-elasticity relationships for finite element modeling of human pelvic bone by modal analysis
Scholz, Roger; Hoffmann, Falk; Sachsen, Sandra von; Drossel, Welf-Guntram; Klöhn, Carsten; Voigt, Christian
Journal Article
2012Analysis of uncertainty effects due to microstructural disorder in cellular or porous materials
Hohe, J.; Hardenacke, V.
Journal Article
2012Experimental and numerical study on mixed mode I/II fatigue crack growth in planar specimens
Varfolomeev, I.; Burdack, M.; Moroz, S.; Siegele, D.; Kadau, K.
Conference Paper
2012Influence of production-related gaps on strength properties and deformation behavior of spot welded TRIP Steel HCT690T
Brauser, S.; Pepke, L.-A.; Weber, G.; Rethmeier, M.
Journal Article
2012Investigation of the capability of flux of force oriented lattice structures for lightweight design
Teufelhart, Stefan
Presentation
2012Material characterization to model linear viscoelastic behavior of thin organic polymer films in microelectronics
Unterhofer, K.; Preu, H.; Walter, J.; Lorenz, G.; Mack, W.; Petzold, M.
Conference Paper
2012Numerical investigations on the residual stress field in a cladded plate due to the cladding process
Brand, M.; Hohe, J.; Siegele, D.
Journal Article
2011Simulation der Festigkeit von Pedikelschrauben in Wirbeln
Lassmann, Andreas
: Wesarg, Stefan (Betreuer)
Bachelor Thesis
2010Multiscale homogenization models for the elastic behaviour of metal/ceramic composites with lamellar domains
Ziegler, T.; Neubrand, A.; Piat, R.
Journal Article
2009Application-oriented research on machining processes
Neugebauer, Reimund; Wertheim, R.; Schubert, A.; Schmidt, G.
Presentation
2009Elastic constants of metal/ceramic composites with lamellar microstructures: Finite element modelling and ultrasonic experiments
Ziegler, T.; Neubrand, A.; Roy, S.; Wanner, A.; Piat, R.
Journal Article
2009Temperature distribution for electrically conductive and non-conductive materials during Field Assisted Sintering (FAST)
Räthel, J.; Herrmann, M.; Beckert, W.
Journal Article
2009Variability study of an active firewall demonstrator
Cardone, T.; Mayer, D.; Bartel, T.; Kurch, M.
Conference Paper
2008Computational modeling of deformation mechanisms and failure in thermoplastic multilayer composites
Seelig, T.
Journal Article
2008Glyph based representation of principal stress tensors in virtual reality environments
Neugebauer, Reimund; Weidlich, D.; Scherer, S.; Wabner, M.
Journal Article
2008Optimierung eines FE-Modells auf Grundlage einer Experimentellen Modalanalyse
Hermsdorf, N.
Thesis
2008VR/AR-Visualisierung von FEM-Daten
Scherer, S.; Wabner, M.; Neugebauer, Reimund; Weidlich, D.
Journal Article
2007Berechnung der Grenzbelastung von Schleifstiften. Tl.2
Schmidt, G.
Conference Paper
2007The Effect of Visco-elasticity on the Result Accuracy of FEM Panel Warpage Simulations Supporting Industrial Microelectronics Packaging
Rzepka, S.; Müller, A.
Conference Paper
2007Strain relaxation in nanopatterned strained silicon round pillars
Himcinschi, C.; Singh, R.; Radu, I.; Milenin, A.P.; Erfurth, W.; Reiche, M.; Gösele, U.; Christiansen, S.H.; Muster, F.; Petzold, M.
Journal Article
2007Thermal shielding techniques for power electronic devices in high temperature applications
Billmann, M.; Schimanek, E.; Buerhop, L.C.
Conference Paper
2006Berechnung der Grenzdrehzahl von Schleifstiften
Schmidt, G.
Conference Paper
2006Development of a peristaltic micro-pump based on PZT bending actuators
Gall, M.; Thielicke, B.; Huart, A.
Conference Paper
2006Parametrische biomedizinische Bildgebung - was macht die Qualität quantitativer radiologischer Verfahren aus?
Glüer, C.-C.; Barkmann, R.; Hahn, H.K.; Majumdar, S.; Eckstein, F.; Nickelsen, T.N.; Bolte, H.; Dicken, V.; Heller, M.
Journal Article
2005Fracture and delamination of thin multilayers on ultra-thin silicon
Kravchenko, G.; Bagdahn, J.
Conference Paper
20043-D finite element analysis of a SOFC-stack
Beckert, W.; Paepcke, A.; Otschik, P.; Kusnecov, M.
Conference Paper
2004From bending actuators to a peristaltic micropump: Modeling and design analysis
Poizat, C.; Thielicke, B.; Benevolenskil, O.
Journal Article
2004Investigations on the reliability of lead-free CSP subjected to harsh environments
Dudek, R.; Döring, R.; Michel, B.
Conference Paper
2004On analytical and numerical modelling of piezoelectric bimorphs
Poizat, C.; Benjeddou, A.
Conference Paper
2004PZT multilayer films: Modeling polarization effects caused by microstructural inhomogeneities
Roedel, J.; Beckert, W.; Kreher, W.S.
Conference Paper, Journal Article
2003Modelling piezoelectric modules with interdigitated electrode structures
Beckert, W.; Kreher, W.S.
Journal Article
2002Reliability assessment of flip-chip assemblies with lead-free solder joints
Schubert, A.; Dudek, R.; Walter, H.; Jung, E.; Gollhardt, A.; Michel, B.; Reichl, H.
Conference Paper
2001Active-matrix addressed micromirror array for wavefront correction in adaptive optics
Gehner, A.; Doleschal, W.; Elgner, A.; Kauert, R.; Kunze, D.; Wildenhain, M.
Conference Paper
2001Calculating temperature field and single track bead shape in laser cladding with Marangoni flow using Rosenthal's solution
Lepski, D.; Eichler, H.; Fux, V.; Scharek, S.; Beyer, E.
Conference Paper
2001Hybrid polymer/silica thermo-optic vertical coupler switches
Keil, N.; Yao, H.H.; Zawadzki, C.; Lösch, K.; Satzke, K.; Wischmann, W.; Wirth, J.V.; Schneider, J.; Bauer, J.; Bauer, M.
Journal Article, Conference Paper
2001Integrated thermo-optic switches in silica/polymer waveguide technology
Yao, H.H.; Keil, N.; Zawadzki, C.; Lösch, K.; Satzke, K.; Wischmann, W.; Wirth, J. van; Bauer, J.; Bauer, M.; Schneider, J.
Conference Paper
2001Simulation of the experimental proof out of wheels and hubs
Rupp, A.; Heinrietz, A.; Ehl, O.
Conference Paper
1999Simulation of the production of functional layers for vibration sensors for tool state monitoring and finite element analysis of mechanical characteristics
Thomas, J.; Kuhnhold, R.; Schnupp, R.; Temmel, G.; Ryssel, H.
Conference Paper
1998Reliability investigations of flip chip interconnects in FCOB and FCOG applications by FEA
Schubert, A.; Dudek, R.; Döring, R.; Michel, B.
Conference Paper
1998Thermo-mechanical analysis of microelectronics components and chipcards
Michel, B.; Vogel, D.
Conference Paper
1998Thermo-mechanical reliability of flip chip structures used in DCA and CSP
Schubert, A.; Dudek, R.; Vogel, D.; Michel, B.; Reichl, H.
Conference Paper
1997FE-Simulation for polymeric packaging materials
Dudek, R.; Scherzer, M.; Schubert, A.; Michel, B.
Conference Paper
1997Finite Element Stress and Strain Analysis of a Double Shear Creep Specimen
Peter, G.; Probst-Hein, M.; Kolbe, M.; Neuking, K.; Eggeler, G.
Journal Article
1997Materials mechanics and mechanical reliability of flip chip assemblies on organics substrates
Schubert, A.; Dudek, R.; Michel, B.; Reichl, H.; Jiang, H.
Conference Paper
1997Materials mechanics and mechanical reliability of flip chip assemblies on organics substrates
Schubert, A.; Dudek, R.; Vogel, D.; Michel, B.; Reichl, H.
Journal Article
1996Stress distribution in and around a spherically ended fiber embedded in a polymer matrix
Shuster, M.; Sherman, D.; Siegmann, A.; Narkis, M.; Jennewein, C.-M.; Eyerer, P.
Journal Article
1996Zum statischen und dynamischen Verhalten von Elastomerbauteilen bei großen Deformationen
Görke, U.-J.
Journal Article
19953D-Finite-Elemente-Analyse zur Lokalisierung des Bruchursprungs in Spaltzugversuch
Schäfer, R.; Soltesz, U.; Bernauer, G.
Book
1995Betriebsfestigkeit von torsionsbelasteten Wellen für Automatgetriebe
Foth, J.; Jauch, F.; Sonsino, C.M.; Kaufmann, H.
Conference Paper
1995Determination of stress, deformation and temperature in the marginal zone of machined workpieces by means of 3D-finite element analysis
Spur, G.; Gerloff, S.
Conference Paper
1995Elastisch-plastisches Materialverhalten von Gußeisen bei quasistatischer und zyklischer Belastung unter Berücksichtigung der bimodularen Eigenschaften im Zug- und Druckbereich und der Werkstoffporosität
Günther, H.; Brandt, U.; Sonsino, C.M.
Journal Article
1995Laser-based thermal shock testing of ceramics - from material characterization to component qualification
Bast, U.; Steiner, D.; Höpken, J.; Balke, H.; Kirchhoff, G.
Conference Paper
1995The mechanical behaviour of sintering powder compacts
Zipse, H.; Riedel, H.
Conference Paper
1995Prediction of shape distortions of hard metal parts by numerical simulation of pressing and sintering
Sun, D.-Z.; Riedel, H.
Conference Paper
1995Zum statischen und dynamischen Verhalten von Elastomerbauteilen bei großen Deformationen
Görke, U.-J.
Book Article
1994Adiabatic shear failure under biaxial dynamic compression/shear loading.
Meyer, L.W.; Staskewitsch, E.; Burblies, A.
Journal Article
1994Analysis of creep in a welded 'P91' pressure vessel
Eggeler, G.; Ramteke, A.; Coleman, M.; Chew, B.; Peter, G.; Burblies, A.; Hald, J.; Jefferey, C.; Rantala, J.; deWitte, M.; Mohrmann, R.
Journal Article
1994Application of modeling codes to ultrasonic weld inspection
Walte, F.; Spies, M.; Langenberg, K.-J.
Conference Paper
1994Experimental and numerical investigations of thermo-mechanically stressed micro-components
Michel, B.; Schubert, A.; Dudek, R.; Grosser, V.
Journal Article
1994Finite element analysis of indentation experiments using visco-plastic material models
Olaf, J.M.; Sester, M.; Hönig, A.; L'Huillier, P.
Conference Paper
1994Finite Element Simulation für HIP-Bauteile
Petzoldt, F.; Khazami-Zahdeh, M.
Book Article
1994Flaw characterization by thermography and shearography
Paul, M.; Burgschweiger, J.; Walle, G.; Meyendorf, N.; Vikhagen, E.
Conference Paper
1994Impact of chuck flatness on wafer distortion and stepper overlay - comparison of experimental and FEM results
Stauch, H.; Simon, K.; Scheunemann, H.U.; Huber, H.-L.
Journal Article
1994Quantitative Deformations- und Rißspitzenanalyse mittels Mikro-Moire-Technik im REM
Michel, B.; Kühnert, R.
Conference Paper
1994Results of benchmark tests for different numerical BPM algorithms
Nolting, H.-P.; Marz, R.
Conference Paper
1994Thermal reliability assessment in SM- and COB-technology by combined experimental and finite element method
Dudek, R.; Michel, B.
Conference Paper
1994Vorträge des sechsten LBF-Kolloquiums
: Buxbaum, O.; Rupp, A.
Conference Proceedings
1993An adaptive approach to the numerical solution of Fresnel's wave equation
Schmidt, F.
Journal Article
1993Anode erosion in wire-EDM - a theoretical model
Spur, G.; Schönbeck, J.
Journal Article
1993Correlation between material properties and damage tolerance behaviour of composite structures
Gerharz, J.J.; Schöpfel, A.; Cvitkovich, M.; Huth, H.; Lang, R.W.
Conference Paper
1993Finite element analysis of indentation experiments
Olaf, J.M.
Book Article
1993Finite element analysis of indentation experiments in surface-coated materials
Olaf, J.M.; Sommer, E.
Conference Paper
1993Finite element analysis of indentation experiments in surfaces and surface coated materials
Olaf, J.M.; Scheer, C.
Journal Article
1993Zur Anwendbarkeit des Spaltzugversuchs für die Ermittlung von Zugfestigkeiten
Bernauer, G.; Soltesz, U.; Kienzler, R.; Schäfer, R.
Book Article
1992Beanspruchung und Beanspruchbarkeit von Punktschweißverbindungen unter Schwingbelastung - ein Auslegungsverfahren
Rupp, Andreas
Dissertation
1992Dynamic behaviour of composites under preloading.
Geißler, A.; Geißler, E.
Journal Article
1992Finite element simulations for basic research in rhinosurgery
Frühauf, T.
Conference Paper
1992Rechnerunterstützte Bereitstellung von Montageprozeßwissen für die Konstruktion
Krüger, S.; Neu, S.
Conference Paper
1992Thermokinetic calculations of the fast cook-off test.
Fabry, C.
Conference Paper
1992Turbo-ISVAS - An interactive visualization system for 3D finite element data
Karlsson, K.
Conference Paper
1991Betriebsfeste Bemessung von Punktschweissverbindungen im Fahrzeugbau
Rupp, A.
Conference Paper
1991Determining optical flow for irregular domains by minimizing quadratic functionals of a certain class
Schnörr, C.
Journal Article
1991Investigations of the dynamic behaviour of compounds under preloading.
Geissler, A.; Schmitt, W.; Weber, H.
Conference Paper
1991Material models for finite element simulations of impact experiments
Seamen, L.; Wulf, A.; Burblies, A.; Behler, F.-J.
Book Article
1991Numerische Modellierung zur Auslegung der Mehrkreismagnetisierung bei der Magnetpulverprüfung
Emson, C.; Betzold, K.; Goebbels, K.
Conference Paper
1991Spannkraftsensoren in Dreibackenfuttern. Spannkraftüberwachung unter Berücksichtigung der Krafteinleitung
Spur, G.; Stelzer, C.
Journal Article
1990Analysis of initiation and growth of a circumferential crack in the HDR-RPV-cylinder pressurized thermal shock
Talja, H.; Neubrech, G.E.; Kordisch, H.
Conference Paper
1990Analytical and numerical crack growth prediction for a leak-before-break assessment of a nuclear pressure vessel
Schmitt, W.; Nagel, G.; Ockewitz, A.; Hodulak, L.; Blauel, J.G.
Journal Article
1990Anwendungen in der Visualisierung
Astheimer, P.; Felger, W.
Report
1990Application of micromechanical models to the prediction of ductile fracture
Schmitt, W.; Sun, D.-Z.; Kienzler, R.
Conference Paper
1990Constitutive equations for dynamically loaded polymer solids and their application in a finite element program
Geißler, E.; Weber, H.
Conference Paper
1990A constitutive model for the finite-element simulation of sintering - distortions and internal stresses.
Riedel, H.
Conference Paper
1990Creep crack growth experiments and their numerical simulation.
Hollstein, T.; Kienzler, R.
Conference Paper
1990Entwicklung von Pkw-Pleueln aus Sinterstahl
Lipp, K.; Sonsino, C.M.
Journal Article
1990Fatigue design of sintered connecting rods
Sonsino, C.M.
Journal Article
1990Graphisch-interaktive Analyse von FEM-Berechnungsergebnissen
Karlsson, K.
Journal Article
1990Investigation of creep crack growth. A comparison between experimental and numerical results.
Hollstein, T.; Kienzler, R.
Conference Paper
1990ISVAS User's Guide
Karlsson, K.
Report
1990Numerical treatment of creep crack growth
Hollstein, T.; Kienzler, R.
Book
19893D-crack propagation using ADINA
Siegele, D.
Conference Paper
1989Determination of stresses, strains, and crack characterizing parameters.
Schmitt, W.; Kordisch, H.
Conference Paper
1989Impact loading and crack arrest
Schmitt, W.; Böhme, W.
Conference Paper
1989The influence of triaxiality of stable crack growth.
Schmitt, W.; Kordisch, H.; Sommer, E.
Journal Article
1989Micromechanics of fracture under static and fatigue loading. Optical interferometry of crack tip craze zones
Könczöl, L.; Döll, W.
Book Article
1989Numerical evaluation of creep experiments
Schmitt, W.; Hollstein, T.; Kienzler, R.
Conference Paper
1989Numerical investigations of the influence of implant shape on stress distribution in the jaw bone
Siegele, D.; Soltesz, U.
Journal Article
1989Numerische Simulation der Druckstoßwirkung zentrischer und exzentrischer Nahbereichsexplosionen auf eingespannte quadratische und rechteckige Stahlplatten
Bücking, P.W.
Book
1989Zur Schätzung von Geschwindigkeitsvektorfeldern in Bildfolgen mit einer richtungsunabhängigen Glattheitsforderung
Schnörr, C.
Conference Paper
1988On sizes and contour stresses of crack tip crazes in thermoplastics
Könczöl, L.; Beran, L.; Döll, W.
Conference Paper
1988Three-dimensional effects affecting the precision of lifetime predictions
Kordisch, H.; Sommer, E.
Conference Paper
1987Micromechanical measurements
Koenczoel, L.; Bevan, L.; Doell, W.
Book Article
1986Numerical evaluation of crack tip opening displacements - 2D and 3D applications
Schmitt, W.; Hollstein, T.
Conference Paper
1985Numerical methods in fracture mechanic
Schmitt, W.
Conference Paper