Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2013Requirements on the fatigue tests of a composite wheel with integrated hub motor
Büter, Andreas; Laveuve, Dominik; Schwarzhaupt, Oliver; Schweizer, Nicole
Conference Paper
2011Piezoelectric driven testing facilities to research the very high cycle fatigue regime
Fischer, C.; Wagener, Rainer; Friedmann, Andreas; Axt, Christoph; Matthias, Michael; Melz, Tobias; Kaufmann, Heinz
Conference Paper
2010Fatigue strength evaluation of linear flow split profile sections based on hardness distribution
Landersheim, V.; Jöckel, M.; Dsoki, C. el; Bruder, T.; Hanselka, H.
Conference Paper
2002Service improvement of high-strength formed sheet steel structures "Bodylife"
Wallmichrath, M.; Reip, C.-P.; Budano, S.; Riscifuli, S.
Report
2000Design and quality assurance of vheicle components based on usage related stress analysis
Fischer, G.
Conference Proceedings
2000Methods of structural durability assessment
Sonsino, C.M.
Conference Paper
1999Fatigue strength of spot welded stainless steel components for railway carriages under operational loading conditions. Final report
: Budano, S.; Salvini, P.; Vivio, F.; Rupp, A.
Report
1999Keramik- und Stahlventile des PKW-Motorenbaus im Vergleich
Brandt, U.; Reinheimer, G.; Mörgenthaler, K.
Conference Paper
1999Schwingfestigkeit von Schweißverbindungen aus der Aluminiumlegierung AlMg 4,5 Mn (AA5083) nach dem Konzept der Mikrostützwirkung
Werner, S.; Sonsino, C.M.; Radaj, D.
Journal Article
1998Betriebsfestigkeitsverhalten einer Auswahl von nichtrostenden Stählen für den Anlagen- und Waggonbau. Abschlußbericht
Müller, F.; Sonsino, C.M.
Book
1998Fatigue design and testing of components
Sonsino, C.M.
Conference Paper
1998Fatigue design and testing of components
Sonsino, C.M.
Conference Paper
1998Fatigue design. Testing, quality reliability and safety on the example of automotive PM' components
Sonsino, C.M.
Conference Paper
1998Influence of load- and deformation-controlled multiaxial tests on fatigue life of crack initiation
Sonsino, C.M.
Conference Paper
1998Methods of service durability assessment
Sonsino, C.M.
Conference Paper
1998Procedure for validation tests on air springs for commercial vehicles
Fischer, G.; Grubisic, V.
Journal Article
1998Rolling contact fatigue behaviour of sintered steels. Endurable Hertzian pressures and damage mechanisms
Lipp, K.; Sonsino, C.M.; Pohl, D.; Hock, S.
Conference Paper
1998Service-like durability approval of wheelsets
Fischer, G.; Grubisic, V.
Conference Paper
1997Bemessung von Keramikventilen für eine Serienfertigung
Sonsino, C.M.; Brandt, U.; Störzel, K.
Conference Paper
1997Fatigue design. Testing, quality reliability and safety on the example of automotive PM' components
Sonsino, C.M.
Conference Paper
1997On the use of the weight function approach to study fatigue crack growth in cast iron components
Fontanari, V.; Sonsino, C.M.; Kaufmann, H.
Conference Paper
1997Review of investigations on aeronautical fatigue in the Federal Republic of Germany
Huth, H.
Conference Proceedings
1996Influence of stress relieving by vibration on the fatigue behaviour of welded joints in comparison to post-weld heat treatment
Sonsino, C.M.; Müller, F.; Back, J. de; Gresnigt, A.M.
Journal Article
1996Inverse hardness distribution and its influence on mechanical properties
Liscic, B.; Grubisic, V.; Totten, G.E.
Conference Paper
1995Review of investigations on aeronautical fatigue in the Federal Republic of Germany
Huth, H.
Conference Proceedings
1995Simulation and measurement of complex, multi-axial, dynamic stress states on vehicle axle components
Müller, A.; Grubisic, V.
Journal Article
1995Das Simultanverfahren zur Extrapolation und Raffung von mehraxialen Belastungs-Zeitfunktionen für Schwingfestigkeitsversuche
Klätschke, H.; Schütz, D.
Journal Article
1994Ermittlung ertragbarer Beanspruchungen am Schweißpunkt auf Basis der übertragenen Schnittgrößen
Rupp, A.; Grubisic, V.; Dilthey, U.; Marek, U.; Graffe, M.; Graf, G.; Dittmann, K.-J.
Book
1993Einflußgrößen für die schwingfeste Bemessung von keramischen Bauteilen aus Al2O3 und Si3N4 im Temperaturbereich zwischen 20 und 1200 Grad Celsius
Sonsino, C.M.; Meyer, S.; Lindemann, G.
Conference Paper
1993Fraunhofer-Institut für Betriebsfestigkeit. Tätigkeitsbericht 1992
 
Annual Report
1993Influence of stress-relieving by vibration as compared with post-weld heat treatment on the fatigue behaviour of repair welds
Back, J. de; Gresnigt, A.M.; Müller, F.; Sonsino, C.M.
Book
1993Review of investigations on aeronautical fatigue in the Federal Republic of Germany
Buxbaum, O.; Schöpfel, A.
Conference Proceedings
1992Betriebsfestigkeit. Sichere und wirtschaftliche Bemessung schwingbruchgefährdeter Bauteile. 2.erw.Aufl.
Buxbaum, O.
Book
1992Improvement of mechanical properties of diffusion- and prealloyed sintered steels by heat treatments.
Sonsino, C.M.; Schlieper, G.
Journal Article
1992Procedure and results of computer controlled durability tests on components of wheel-hub-assemblies
Fischer, G.; Grubisic, V.
Conference Paper
1992Response of metallic structural materials to loading sequences
Buxbaum, O.
Conference Paper
1991Review of investigations on aeronautical fatigue in the Federal Republic of Germany
Buxbaum, O.; Schöpfel, A.
Conference Proceedings
1990Betriebsfestigkeit von Punktschweißverbindungen
Grubisic, V.; Radaj, D.; Rupp, A.
Journal Article
1990Fatigue design of sintered con-rods
Sonsino, C.M.
Report
1989Review of investigations on aeronautical fatigue in the Federal Republic of Germany
Buxbaum, O.; Huth, H.
Conference Proceedings
1987Review of investigations on aeronautical fatigue in the Federal Republic of Germany
Buxbaum, O.; Huth, H.
Conference Proceedings
1985Review of investigations on aeronautical fatigue in the Federal Republic of Germany
Buxbaum, O.; Huth, H.
Conference Proceedings
1983Review of investigations on aeronautical fatigue in the Federal Republic of Germany
Buxbaum, O.; Schütz, D.
Conference Proceedings
1979Review of investigations on aeronautical fatigue in the Federal Republic of Germany
Schütz, D.; Buxbaum, O.
Report