| | |
|---|
| 2019 | Development of a new modelling concept for providing initial consultation at a federal state level
Mandel, Tim; Elsland, Rainer | Conference Paper |
| 2019 | Energy efficient technology adoption in low-income households in the European Union - what is the evidence?
Schleich, Joachim | Journal Article |
| 2019 | Entwicklung einer Methode zur Bewertung der Treibhausgas-Emissionen des Betriebs von Logistikimmobilien
Rüdiger, David
: Clausen, Uwe (Hrsg.); Flämig, Heike (Gutachter) | Dissertation |
| 2019 | Grundlagen und Verfahren zur profilierten Erwärmung von PET-Preforms mit Mikrowellen
Graf, Matthias Harald
: Elsner, P.; Jelonnek, J. | Dissertation |
| 2019 | A large-scale test of the effects of time discounting, risk aversion, loss aversion and present bias on household adoption of energy-efficient technologies
Schleich, Joachim; Gassmann, Xavier; Meissner, Thomas; Faure, C. | Journal Article |
| 2019 | Macroeconomic impact of the German energy transition and its distribution by sectors and regions
Sievers, Luisa; Breitschopf, Barbara; Pfaff, Matthias; Schaffer, Axel | Journal Article |
| 2019 | Model-based routing in flexible manufacturing systems
Windmann, Stefan; Balzereit, Kaja; Niggemann, Oliver | Journal Article |
| 2019 | Modelling and simulation of low-temperature district heating systems for the development of an exergy-based assessment method
Kallert, Anna Marie Dagmar
: Wagner, U.; Björk, F. | Dissertation |
| 2019 | Thermal management of PVT collectors
Lämmle, Manuel
: Henning, Hans-Martin (Referent); Wagner, Andreas (Referent); Hermann, Michael (Betreuer) | Dissertation |
| 2019 | Transposing the requirements of the Energy Efficiency Directive on mandatory energy audits for large companies: A policy‐cycle‐based review of the national implementation in the EU-28 member states
Nabitz, Lisa; Hirzel, Simon | Journal Article |
| 2018 | An analysis on retention error behavior and power consumption of recent DDR4 DRAMs
Mathew, Deepak M.; Schultheis, Martin; Rheinländer, Carl C.; Sudarshan, Chirag; Weis, Christian; Wehn, Norbert; Jung, Matthias | Conference Paper |
| 2018 | Computation of energy efficient driving speeds in conveying systems
Windmann, Stefan; Niggemann, Oliver; Stichweh, Heiko | Journal Article |
| 2018 | Considering energy in the simulation of manufacturing systems
Wenzel, Sigrid; Peter, Tim; Stoldt, Johannes; Schlegel, Andreas; Uhlig, Tobias; Jósvai, János | Conference Paper |
| 2018 | Decision support for planning techniques in energy efficiency projects
Süße, Marian; Stoldt, Johannes; Schlegel, Andreas; Putz, Matthias | Journal Article, Conference Paper |
| 2018 | Development and characterization of p-type PERT solar cells
Meier, Sebastian
: Paul, O.; Glunz, Stefan W. (Referent); Altermatt, Pietro P. (Referent) | Dissertation |
| 2018 | Development and description of photochromic devices prepared by sputtering
Bogati, Shankar
: Weber, Eicke R. (Referent); Wittwer, Volker (Referent); Henning, Hans-Martin (Referent) | Dissertation |
| 2018 | Direkte Sliding-Mode-Stromregelung von Vorschubantrieben
Laptev, Igor | Dissertation |
| 2018 | Do perceptions of international climate policy stimulate or discourage voluntary climate protection activities? A study of German and US households
Schleich, Joachim; Schwirplies, Claudia; Ziegler, Andreas | Journal Article |
| 2018 | Einsatzverhalten und Leistungsbedarfe unterschiedlicher Kühlungsmethoden beim Außen-Längs-Runddrehen
Fürstmann, Paul
: Krüger, J.; Uhlmann, Eckart; Klocke, F. | Dissertation |
| 2018 | Energy efficient technology adoption and low-income households in the EU - what is the evidence?
Schleich, Joachim | Report |
| 2018 | Erarbeitung eines Verfahrens zur klimaunabhängigen Ermittlung der energetischen Kennwerte von transparenten Fassaden- und Membrankonstruktionen aus in Situ Messungen
Kersken, Matthias
: Gehlen, Christoph (Vorsitzender); Sedlbauer, Klaus (1. Prüfer); Sieder, Mike (2. Prüfer) | Dissertation |
| 2018 | Fast-switching monolithically integrated high-voltage GaN-on-Si power converters
Weiß, Beatrix
: Paul, O.; Ambacher, O.; Maksimovic, D. | Dissertation |
| 2018 | Industrial excess heat recovery in industry-city networks: A technical, environmental and economic assessment of heat flexibility
Karner, Katharina; McKenna, Russell; Klobasa, Marian; Kienberger, Thomas | Journal Article |
| 2018 | A large-scale test of the effects of time discounting, risk aversion, loss aversion and present bias on household adoption of energy efficient technologies
Schleich, Joachim; Gassmann, Xavier; Meissner, Thomas
: Faure, Corinne | Report |
| 2018 | A method for energetic comparison of 6-axis industrial robots and its further scope for resource-efficient plant design
Findeisen, Mathias; Todtermuschke, Marcel; Schaffrath, Robert; Putz, Matthias | Journal Article, Conference Paper |
| 2018 | Methodology and model for predicting energy consumption in manufacturing at multiple scales
Reimann, Jan; Friedemann, Marko; Wenzel, Ken; Putz, Matthias | Journal Article, Conference Paper |
| 2018 | New approaches for energy management. Incentives, integrated system planning and operation and grid integration
Appen, J. von | Presentation |
| 2018 | Non-Intrusive Load Monitoring (NILM): Unsupervised machine learning and feature fusion
Bernard, Timo; Verbunt, Martin; Bögel, Gerd vom; Wellmann, Thorsten | Conference Paper |
| 2018 | Target-oriented analysis of resource consumption in manufacturing process chains
Demmer, Axel; Klingbeil, Nils; Klocke, Fritz; Putz, Matthias; Schmitt, Robert; Vollmer, Thomas | Journal Article, Conference Paper |
| 2018 | TRANSFORMERS - Configurable and Adaptable Trucks and Trailers for Optimal Transport
Adams, Paul; Nitzsche, Gunter; Löfstrand, Sofia; Selas, A.; Arts, G.; Adesiyun, A.; Wagner, S.; Koch, T.; Jacob, B.; Schmidt, F.; Billiet, M.; Hariram, A.; Queckenstedt, B.; Koornneef, G.; Zweep, C. van der; Bertens, T.; Hillbrand, B. | Conference Paper |
| 2018 | TRANSFORMERS. Test Drive Results of a New Hybridisation Concept for Truck-Semitrailer Combinations
Nitzsche, Gunter; Wagner, Sebastian; Baert, Rik; Engels, Frank; Maillet, Christophe | Conference Paper |
| 2017 | Adoption of energy efficiency measures for non-residential buildings: Technological and organizational heterogeneity in the trade, commerce and services sector
Olsthoorn, Mark; Schleich, Joachim; Hirzel, Simon | Journal Article |
| 2017 | CO2 mitigation potential of plug-in hybrid electric vehicles larger than expected
Plötz, Patrick; Funke, Simon Á.; Jochem, Patrick; Wietschel, Martin | Journal Article |
| 2017 | Drivers and barriers to the diffusion of energy-efficient technologies - a plant-level analysis of the German steel industry
Arens, Marlene; Worrell, Ernst; Eichhammer, Wolfgang | Journal Article |
| 2017 | Dynamische Sensitivitätsanalysemethoden energetischer Wohngebäudequartierssimulationen
Lindauer, Manuel
: Sedlbauer, Klaus (Prüfer); Leistner, Philip (Hrsg.); Mehra, Schew-Ram (Hrsg.); Lang, Werner (Prüfer); Hensen, Jan L.M. (Prüfer) | Dissertation |
| 2017 | Effectiveness of energy audits in small business organizations
Schleich, Joachim; Fleiter, Tobias | Journal Article |
| 2017 | Efficiency analysis methodology. Deliverable D4.1
Korolija, Ivan; Greenough, Rick; Wright, Andy; Stoldt, Johannes; Franz, Enrico; Murray, Vincent; Jakob, Uli; Gandiaga, Iñigo | Report |
| 2017 | Energy efficiency through a load-adaptive building automation in production
Zhou, Beiyan; Vollmer, Thomas; Schmitt, Robert | Conference Paper |
| 2017 | Enhancing the energy-efficient production of tempered glass by using simulation-based optimisation
Seidel, Stephan; Franke, Matthias; Baumann, Frank; Wilson, Heike; Gromnitza, Ulrike | Conference Paper |
| 2017 | Free riding and rebates for residential energy efficiency upgrades: A multi-country contingent valuation experiment
Olsthoorn, Mark; Schleich, Joachim; Gassmann, Xavier; Faure, Corinne | Report |
| 2017 | Free riding and rebates for residential energy efficiency upgrades: A multi-country contingent valuation experiment
Olsthoorn, Mark; Schleich, Joachim; Gassmann, Xavier; Faure, Corinne | Journal Article, Conference Paper |
| 2017 | Heat transfer surface area enlargement by usage of metal textile structures - development, potential and evaluation
Fugmann, H.; Schnabel, L.; Lauro, P. di | Conference Paper |
| 2017 | Improvement of predictive energy efficiency optimization using long distance horizon estimation
Guan, Tianyi; Frey, Christian W. | Conference Paper |
| 2017 | The influence of occupancy behaviour on the performance of mechanical ventilation systems regarding energy consumption and IAQ
Carbonare, N.; Coydon, F.; Dinkel, A.; Bongs, C. | Conference Paper |
| 2017 | Learning networks as an enabler for informed decisions to target energy-efficiency potentials in companies
Wohlfarth, Katharina; Eichhammer, Wolfgang; Schlomann, Barbara; Mielicke, Ursula | Journal Article |
| 2017 | Low power mode energy demand of household appliances - SELINA and APP projects
Patrao, Carlos; Almeida, Anibal T. de; Harrison, Bob; Schlomann, Barbara; Damnics, Melissa; Fonseca, Paula | Journal Article |
| 2017 | The macroeconomic effects of ambitious energy efficiency policy in Germany - Combining bottom-up energy modelling with a non-equilibrium macroeconomic model
Hartwig, Johannes; Kockat, Judit; Schade, Wolfgang; Braungardt, Sibylle | Journal Article |
| 2017 | The need for comprehensive and well targeted instrument mixes to stimulate energy transitions: The case of energy efficiency policy
Rosenow, Jan; Kern, Florian; Rogge, Karoline | Journal Article |
| 2017 | Optimiertes multifunktionales bidirektionales Ladegerät für Elektrofahrzeuge
Jung, Marco
: Mertens, A.; Zacharias, P. | Dissertation |
| 2017 | Procedure model for efficient simulation studies which consider the flows of materials and energy simultaneously
Stoldt, Johannes; Putz, Matthias | Journal Article, Conference Paper |
| 2017 | Report about analyzed and clustered factory typologies. Deliverable D1.1
Bartolomé, Diego; Callegati, Enrico; Frascaroli, Michele; Ronco, Johanna; Corazzi, Emanuela; Baracchi, Marco; Seeger, Heiko; Reñones, Anibal; Morentin, Francisco Javier; Vélez, Jhon Fredy; Moral, Alberto; Morillo, María; Unal, Meryem; Bayraktar, Metim; Bayraktar, Sefa Merve; Trujillo, Laura; Jakob, Klemens; Jakob, Uli; Yeltekin, Aysın; Cucchetti, Stefano; Lucisano, Giuseppe; Zaballos, Carlos; Moreno, Julián; Greenough, Rick; Korolija, Ivan; Stoldt, Johannes; Franz, Enrico; Messervey, Thomas; Cinque, Pietro de; Costa, Andrea | Report |
| 2017 | Requirements for resource networks compared to the state of the art. Deliverable D4.2
Stoldt, Johannes; Franz, Enrico; Melzer, Corina; Süße, Marian; Morentin, Francisco; Velez, Freddy; Bujedo, Luis A.; Moral, Alberto; Postigo Sierra, Rafael; Jakob, Uli; Steinbeißer, Johannes; Gandiaga, Iñigo | Report |
| 2017 | Simulation study on flexibilities in the material and energy flows of an open-pit mine
Stoldt, Johannes; Fanghänel, Christin; Lange, Hans Rüdiger; Schlegel, Andreas; Woldt, Thomas; Putz, Matthias | Journal Article |
| 2017 | Simulation und Verlustanalyse von lokal rückseitenkontaktierten Silicium-Solarzellen
Wöhrle, Nico
: Lausen, G.; Weber, E.R.; Altermatt, P. | Dissertation |
| 2017 | Technological change and industrial energy efficiency. Exploring the low-carbon transformation of the German iron and steel industry
Arens, Marlene | Dissertation |
| 2017 | Wire Cloth Micro Heat Exchanger with High Pressure Stability
Balzer, R.; Fugmann, H.; Schnabel, L. | Book Article |
| 2017 | Wire Structure Heat Exchangers. New Designs for Efficient Heat Transfer
Fugmann, H.; Laurenz, E.; Schnabel, L. | Journal Article |
| 2016 | Alternative heating - press hardening - high speed impact cutting - energyefficient prozess chain for uhss
Landgrebe, Dirk; Müller, Roland; Barthel, Tom | Conference Paper |
| 2016 | Assessment of product-service systems for increasing the energy efficiency of compressed air systems
Weißfloch, Ute; Geldermann, Jutta | Journal Article |
| 2016 | Computational geometry in the context of building information modeling
Ladenhauf, Daniel; Battisti, Kurt; Berndt, Rene; Eggeling, Eva; Fellner, Dieter W.; Gratzl-Michlmair, Markus; Ullrich, Torsten | Journal Article, Conference Paper |
| 2016 | Drahtgewebebasierte Wärmeübertrager: Entwicklung und Bewertung
Fugmann, H.; Tahir, A.; Nienborg, B.; Schnabel, L. | Journal Article |
| 2016 | Energy efficiency potentials of different robot design concepts
Permin, Eike; Kurilova-Palisaitiene, Jelena; Mannheim, Tom; Buhse, Kai; Schmitt, Robert; Corves, Burkhard; Björkman, Mats | Conference Paper |
| 2016 | Energy-efficiency in a hybrid process of sheet metal forming and polymer injection moulding
Landgrebe, Dirk; Kräusel, Verena; Rautenstrauch, Anja; Albert, Andre´; Wertheim, Rafael | Conference Paper, Journal Article |
| 2016 | The environmental impact of eco-innovations: The case of EU residential electricity use
Braungardt, Sibylle; Elsland, Rainer; Eichhammer, Wolfgang | Journal Article |
| 2016 | Fortschritte in der Antriebs- und Automatisierungstechnik (FAA)
: Frey, Georg; Schumacher, Walter; Verl, Alexander | Conference Proceedings |
| 2016 | The future of energy efficiency in Europe and future energy demand
Eichhammer, Wolfgang | Journal Article |
| 2016 | Geometry simplification according to semantic constraints
Ladenhauf, Daniel; Berndt, Rene; Krispel, Ulrich; Eggeling, Eva; Ullrich, Torsten; Battisti, Kurt; Gratzl-Michlmair, Markus | Journal Article |
| 2016 | Holistic evaluation of conventional and innovative ventilation systems for the energy retrofit of residential buildings
Coydon, Fabien
: Henning, H.-M.; Gabi, M. | Dissertation |
| 2016 | Making the implicit explicit: A look inside the implicit discount rate
Schleich, Joachim; Gassmann, Xavier; Faure, Corinne; Meissner, Thomas | Report |
| 2016 | Making the implicit explicit: A look inside the implicit discount rate
Schleich, Joachim; Gassmann, Xavier; Faure, Corinne; Meissner, Thomas | Journal Article |
| 2016 | Potential energy savings via use of free cooling and cold energy storage
Puls, Philipp | Presentation |
| 2016 | Retrofit of multi-family homes with central heat recovery ventilation, learnings from three case studies
Coydon, F.; Herkel, S.; Henning, H.-M. | Conference Paper |
| 2016 | Sektorübergreifende Modellierung und Optimierung eines zukünftigen deutschen Energiesystems unter Berücksichtigung von Energieeffizienzmaßnahmen im Gebäudesektor
Palzer, Andreas
: Henning, Hans-Martin; Fichtner, Wolf | Dissertation |
| 2016 | Towards a green economy in Germany? The role of energy efficiency policies
Ringel, Marc; Schlomann, Barbara; Krail, Michael; Rohde, Clemens | Journal Article |
| 2016 | Unsupervised learning algorithm using multiple electrical low and high frequency features for the task of load disaggregation
Bernard, Timo; Marx, Michael | Conference Paper |
| 2016 | Die vierte industrielle Revolution auf dem Vormarsch
Kemmerling, Martin; Meyer, Frederic; Marx, Michael; Grundmann, Kai | Journal Article |
| 2015 | An approach for energy-oriented production control using energy flexibility
Schultz, Cedric; Sellmaier, Peter; Reinhart, Gunther | Conference Paper, Journal Article |
| 2015 | Approach for implementing a control and optimization loop for an energy-efficient factory
Wahren, Sylvia; Siegert, Jörg; Bauernhansl, Thomas | Journal Article, Conference Paper |
| 2015 | Approaches for monitoring the energy consumption with machine learning methods
Gebbe, Christian; Glasschröder, Johannes; Reinhart, Gunther | Conference Paper |
| 2015 | Combining several distinct electrical features to enhance nonintrusive load monitoring
Bernard, Timo; Wohland, Daniel Michael; Klaaßen, Julian; Bögel, Gerd vom | Conference Paper |
| 2015 | Cost-effective technologies to control indoor air quality and comfort in energy efficient building retrofitting
Revel, G.M.; Arnesano, M.; Pietroni, F.; Frick, J.; Reichert, M.; Schmitt, K.; Huber, J.; Ebermann, M.; Battista, U.; Alessi, F. | Journal Article |
| 2015 | Energy saving potentials for industrial steam boilers - findings from the ecodesign process
Aydemir, Ali; Braimakis, Konstantinos; Rohde, Clemens; Karellas, Sotirios; Ostrander, Berit | Conference Paper |
| 2015 | Energy- and resource-efficient process routes in hot sheet metal forming
Landgrebe, Dirk; Müller, Roland; Schieck, Frank | Conference Paper |
| 2015 | Entwicklung von Betriebsstrategien zur Verbesserung der Effizienz von Kälteversorgungssystemen mit thermischen Speichern
Puls, Philipp; Öchsner, Richard; Linhardt, Simon | Conference Paper |
| 2015 | High-efficiency, high-temperature continuous class-E sub-waveform solution AlGaN/GaN power amplifier
Carrubba, V.; Maroldt, S.; Musser, M.; Ture, E.; Dammann, M.; Raay, F. van; Quay, R.; Brueckner, P.; Ambacher, O. | Journal Article |
| 2015 | Multidimensional analysis of process chains regarding the resource-efficient manufacturing of hybrid structures
Fanghänel, Christin; Rautenstrauch, Anja; Symmank, Christina; Katzenberger, Jeannette; Putz, Matthias; Kräusel, Verena; Götze, Uwe; Awiszus, Birgit | Journal Article, Conference Paper |
| 2015 | Resource networks: Decentralised factory operation utilising renewable energy sources
Stoldt, Johannes; Franz, Enrico; Schlegel, Andreas; Putz, Matthias | Journal Article, Conference Paper |
| 2015 | Towards integrated energy efficiency assessment of production machinery, auxiliary processes and technical building services
Weeber, Max; Böhner, Johannes; Steinhilper, Rolf | Conference Paper |
| 2014 | A brighter future? Quantifying the rebound effect in energy efficient lighting
Schleich, Joachim; Mills, Bradford F.; Dütschke, Elisabeth | Journal Article |
| 2014 | Classification of metal-cutting machines by energy efficiency
Grigor'ev, S.N.; Kuznetsova, A.P.; Volosovaa, M.A.; Koriath, Hans-Joachim | Journal Article |
| 2014 | Demonstration of a multi-criteria based decision support framework for selecting PSS to increase resource efficiency
Miller, Michael; Mattes, Katharina | Report |
| 2014 | Derivation of measures for energy efficient machine design by evaluating energy consumption data
Böhner, Johannes; Hamacher, Moritz; Reger, Arnim; Steinhilper, Rolf | Conference Paper, Journal Article |
| 2014 | Energetic evaluation of partly or fully automated assembly processes with regard to ergonomics
Böhme, Jeannette; Bauer, Anna; Todtermuschke, Marcel | Conference Paper |
| 2014 | Energy efficiency potentials in the chlor-alkali sector - a case study of shandong province in China
Li, Chansheng; Zhu, Lei; Fleiter, Tobias | Journal Article |
| 2014 | Energy efficiency through industrial automation. IEC Technical Report 62837
Hörcher, Günter | Presentation |
| 2014 | Energy-sensitive control strategies for decoupled production systems
Putz, Matthias; Schlegel, Andreas; Stoldt, Johannes; Franz, Enrico; Langer, Tino | Journal Article |
| 2014 | Evaluating measures for adapting the energy demand of a production system to volatile energy prices
Graßl, Markus; Reinhart, Gunther | Conference Paper, Journal Article |
| 2014 | Methodology for creation a reference trajectory for energetic comparability of industrial robots in body shop
Todtermuschke, Marcel; Findeisen, Mathias; Bauer, Anna | Journal Article, Conference Paper |
| 2014 | A model-based approach to energy-saving manufacturing control strategies
Langer, Tino; Schlegel, Andreas; Stoldt, Johannes; Putz, Matthias | Conference Paper, Journal Article |
| 2014 | Modeling of drilling assisted by cryogenic cooling for higher efficiency
Dix, Martin; Wertheim, Rafael; Schmidt, Gerhard; Hochmuth, Carsten | Journal Article, Conference Paper |
| 2014 | Performance analysis of commercial buildings - results and experiences from the German demonstration program "Energy Optimized Building (EnOB)"
Wagner, A.; Lützkendorf, T.; Voss, K.; Spars, G.; Maas, A.; Herkel, S. | Conference Paper, Journal Article |
| 2014 | Realisierung und Nachweis der Energieeffizienz in Anlagen der technischen Logistik
Bergmann, A.; Stryhal, Z.; Weise, S.; Strobel, J.; Wolf, Klaus; Lüdemann, L.; Schreiter, M.; Naumann, M. | Conference Paper |
| 2014 | Reibenergieverteilungen von Mahlkugelkontakten
Köster, Alexander; Scherge, Matthias; Teipel, Ulrich | Journal Article |
| 2014 | SUPREME SUstainable PREdictive Maintenance for manufacturing Equipment
Sieg-Zieba, Sophie; Adolf, Thomas; Lucke, Dominik; Haug, Ralf; Boulet, Pierrick; García-Sedano, Javier | Conference Paper |
| 2014 | Sustainability in manufacturing
Kurka, Petr | Presentation |
| 2013 | Energy efficient biogas upgrading by anaerobic hydrolysis
Jung, R. | Presentation |
| 2013 | Energy, catalyst and reactor considerations for (near)-industrial plasma processing and learning for nitrogen-fixation reactions
Hessel, Volker; Anastasopoulou, Aikaterini; Wang, Qi; Kolb, Gunther; Lang, J. | Journal Article, Conference Paper |
| 2013 | Fostering energy efficiency by way of a techno-economic framework
Putz, Matthias; Götze, Uwe; Stoldt, Johannes; Franz, Enrico | Conference Paper |
| 2013 | Generic energy-enhancement module for consumption analysis of manufacturing processes in discrete event simulation
Stoldt, Johannes; Schlegel, Andreas; Franz, Enrico; Langer, Tino; Putz, Matthias | Conference Paper |
| 2013 | Green factory Bavaria - knowledge transfer to increase energy efficiency in manufacturing
Steinhilper, Rolf | Conference Paper |
| 2013 | Increasing energy efficiency through simulation-driven process evaluation
Stoldt, Johannes; Neumann, Daniel; Langer, Tino; Putz, Matthias; Schlegel, Andreas | Conference Paper |
| 2013 | Introduction to the special issue: Financing instruments to promote energy efficiency and renewables in times of tight public budgets
Eichhammer, Wolfgang; Ragwitz, Mario; Schlomann, Barbara | Journal Article |
| 2013 | Long-term Energy Demand Modelling - Analyzing the Impact of Myopic Technological Knowledge
Elsland, Rainer; Wietschel, Martin | Presentation |
| 2013 | Eine Methodik zur modellbasierten Planung und Bewertung der Energieeffizienz in der Produktion
Haag, Holger
: Westkämper, Engelbert (Hauptberichter) | Dissertation |
| 2013 | Methodology for energy efficiency on process level
Dörr, Marcus; Wahren, Sylvia; Bauernhansl, Thomas | Conference Paper, Journal Article |
| 2013 | Objectives and Barriers for the Implementation of Energy Management Systems in Manufacturing Enterprises in Germany: Results of an Empirical Investigation
Jochem, Roland; Karcher, Phillip; Siemer, Markus | Conference Paper |
| 2013 | Objectives and Barriers for the Implementation of Energy Management Systems in Manufacturing Enterprises in Germany: Results of an Empirical Investigation
Jochem, Roland; Karcher, Phillip; Siemer, Markus | Journal Article |
| 2013 | RFID integrated adaption of manufacturing execution systems for energy efficient production
Steinhilper, Rolf; Freiberger, Stefan; Kübler, Frank; Böhner, Johannes | Conference Paper |
| 2013 | Wafer level vacuum packaging of scanning micro-mirrors using glass-frit and anodic bonding methods
Langa, Sergiu; Drabe, Christian; Kunath, Christian; Dreyhaupt, André; Schenk, Harald | Conference Paper |
| 2013 | Which role for market-oriented instruments for achieving energy efficiency targets in Germany?
Schlomann, Barbara; Rohde, Clemens; Eichhammer, Wolfgang; Bürger, Veit; Becker, Daniel | Journal Article |
| 2013 | Wie effizient arbeiten Biomasseheiz(kraft)werke?
Meiller, M.; Binder, S.; Jakuttis, M. | Journal Article |
| 2012 | The characteristics of energy-efficiency measures - a neglected dimension
Fleiter, Tobias; Hirzel, Simon; Worrell, Ernst | Journal Article |
| 2012 | Energy consumption and CO2 emissions in China's cement industry: A perspective from LMDI decomposition analysis
Xu, Jin-Hua; Fleiter, Tobias; Eichhammer, Wolfgang; Fan, Ying | Journal Article |
| 2012 | Energy efficiency in the German pulp and paper industry - a model-based assessment of saving potentials
Fleiter, Tobias; Fehrenbach, Daniel; Worrell, Ernst; Eichhammer, Wolfgang | Journal Article |
| 2012 | Energy intensity development of the german iron and steel industry between 1991 and 2007
Arens, Marlene; Worrell, Ernst; Schleich, Joachim | Conference Paper, Journal Article |
| 2012 | Energy-efficient elevators and escalators in Europe: An analysis of energy efficiency potentials and policy measures
Almeida, Anibal de; Hirzel, Simon; Patrao, Carlos; Fong, Joao; Dütschke, Elisabeth | Journal Article |
| 2012 | Energy-sensitive control strategies for discrete parts manufacturing
Putz, Matthias; Schlegel, Andreas; Franz, Enrico; Langer, Tino; Stoldt, Johannes | Conference Paper |
| 2012 | Energy-sensitive production control in mixed model manufacturing processes
Neugebauer, Reimund; Putz, Matthias; Schlegel, Andreas; Franz, Enrico; Langer, Tino; Lorenz, Sören | Conference Paper |
| 2012 | Entwicklung eines Softwarewerkzeuges zur NC-Programm basierten, maschinenabhängigen Energieverbrauchsprognose
Schmidt, Ingo | Thesis |
| 2012 | Exergy flow diagrams as novel approach to discuss the efficiency of compressed air systems
Krichel, Susanne; Sawodny, Oliver; Hülsmann, Steffen; Hirzel, Simon; Elsland, Rainer | Conference Paper |
| 2012 | The German energy audit program for firms - a cost-effective way to improve energy efficiency?
Fleiter, Tobias; Gruber, Edelgard; Eichhammer, Wolfgang; Worrell, Ernst | Journal Article |
| 2012 | High speed cutting and high-performance cutting for improving resource and energy efficiency
Drossel, Welf-Guntram; Neugebauer, Reimund; Wertheim, Rafael | Conference Paper |
| 2012 | Method for energy and resource balancing demonstrated as an example of the hot sheet metal production process
Göschel, A.; Schieck, F.; Schönherr, J. | Journal Article, Conference Paper |
| 2012 | Multi-disciplinary strategic research agenda for ICT-enabled energy efficiency
: Ellis, Keith (Hrsg.); Hassan, Tarek (Hrsg.); Schulz, Felix (Mitarb.); Buchert, Tom (Mitarb.); Lindow, Kai (Mitarb.) et al. | Report |
| 2012 | Reducing energy demands of printing machines by energy reuse options and optimization
Neugebauer, Reimund; Putz, Matthias; Keller, Carsten; Fälsch, Sascha | Conference Paper |
| 2012 | Resource and energy efficiency in machining using high-performance and hybrid processes
Neugebauer, Reimund; Drossel, Welf-Guntram; Wertheim, Rafael; Hochmuth, Carsten; Rennau, Anett; Dix, Martin | Conference Paper |
| 2012 | Saving energy at work: The design of a pervasive game for office spaces
Simon, Jonathan; Jahn, Marco; Al-Akkad, Amro | Conference Paper |
| 2012 | SLAs for energy-efficient data centres: The standards-based approach of the OPTIMIS project
Ziegler, Wolfgang | Conference Paper |
| 2012 | Standards for energy efficiency in manufacturing processes
Hörcher, Günter | Presentation |
| 2012 | Systemvergleich zwischen magnetisch erregten und piezoerregten Schwingförderern
Dieckerhoff, Marc; Prasse, Christian; Ten Hompel, Michael | Conference Paper |
| 2012 | Systemvergleich zwischen magnetisch erregten und piezoerregten Schwingförderern
Dieckerhoff, Marc; Prasse, Christian; Ten Hompel, Michael | Journal Article |
| 2012 | Thermal cooling using low-temperature waste heat: A cost-effective way for industrial companies to improve energy efficiency?
Schall, D.; Hirzel, S. | Journal Article |
| 2011 | Architecture for multilevel monitoring and control of energy consumption
Verl, Alexander; Westkämper, Engelbert; Abele, Eberhard; Dietmair, Anton; Schlechtendahl, Jan; Friedrich, Jens; Haag, Holger; Schrems, Sebastian | Conference Paper |
| 2011 | Barriers to energy efficiency in industrial bottom-up energy demand models - a review
Fleiter, T.; Worrell, E.; Eichhammer, W. | Journal Article |
| 2011 | Energetische Quartiersplanung
Erhorn-Kluttig, H.; Jank, R.; Schrempf, L.; Dütz, A.; Rumpel, F.; Schrade, J.; Erhorn, H.; Beier, C.; Sager, C.; Schmidt, D. | Book |
| 2011 | Energieeffizienz in Zahlen
Graichen, Verena; Gores, Sabine; Penninger, Gerhard; Zimmer, Wiebke; Cook, Vanessa; Schlomann, Barbara; Fleiter, Tobias; Strigel, Adrian; Eichhammer, Wolfgang; Ziesing, Hans-Joachim | Report |
| 2011 | Energy data acquisition and utilization for energy-oriented product data management
Steger, D.; Rünger, G.; Reichel, T.; Frieß, U.; Wabner, M. | Conference Paper |
| 2011 | Energy efficient process planning based on numerical simulations
Neugebauer, Reimund; Hochmuth, C.; Schmidt, G.; Dix, M. | Conference Paper |
| 2011 | EnergyPULSE: Tracking sustainable behavior in office environments
Jahn, Marco; Schwartz, Tobias; Simon, Jonathan; Jentsch, Marc | Presentation, Conference Paper |
| 2011 | Heuristic-based evaluation of energy flows in press hardening process chains
Neugebauer, Reimund; Göschel, A.; Schieck, F.; Schönherr, J. | Conference Paper |
| 2011 | Implementation of energy-related aspects into model-based design of processes and process chains
Schubert, Andreas; Goller, Sven; Sonntag, Daniel; Nestler, Andreas | Conference Paper |
| 2011 | Increasing energy awareness in office spaces
Simon, J.
: Prinz, W. (Prüfer); Oppermann, R. (Prüfer); Jahn, Marco (Betreuer) | Master Thesis |
| 2011 | Influence exerted by tool properties on the energy efficiency during drilling and turning operations
Neugebauer, Reimund; Schubert, Andreas; Reichmann, Björn; Dix, Martin | Journal Article |
| 2011 | Integrating energy-saving process chains and product data models
Rünger, Gudula; Schubert, Andreas; Goller, Sven; Krellner, Björn; Steger, Daniel | Conference Paper |
| 2011 | Lightweight components for energy-efficient machine tools
Kroll, Lothar; Blau, Peter; Wabner, Markus; Frieß, Uwe; Eulitz, Jan; Klärner, Matthias | Journal Article |
| 2011 | Manufacturing of surface microstructures for improved tribological efficiency of powertrain components and forming tools
Schubert, Andreas; Neugebauer, Reimund; Sylla, David; Avila, Miguel; Hackert, Matthias | Journal Article |
| 2011 | Semantic web based dynamic energy analysis and forecasts in manufacturing engineering
Wenzel, K.; Riegel, J.; Schlegel, A.; Putz, M. | Conference Paper |
| 2011 | Survey on energy efficiency measurements in heterogenous facility logistics systems
Prasse, C.; Kamagaew, A.; Gruber, S.; Kalischewski, K.; Soter, S.; Ten Hompel, M. | Conference Paper |
| 2010 | Ambient intelligence in next generation rooms and buildings
Bögel, G. vom; Scherer, K. | Abstract |
| 2010 | Approach for the Development of Energy-Efficient Machine Tools
Neugebauer, Reimund; Frieß, U.; Paetzold, J.; Wabner, M.; Richter, M. | Conference Paper, Journal Article |
| 2010 | Calculation of the required amount of energy storage
Kanngießer, Annedore | Presentation |
| 2010 | Ein Duo für die Hydraulik
| Journal Article |
| 2010 | Effects of economies of scale and experience on the costs of energy-efficient technologies - case study of electric motors in Germany
Jardot, D.; Eichhammer, W.; Fleiter, T. | Journal Article |
| 2010 | Elevators and escalators: Energy performance and strategies to promote energy efficiency
Almeida, A. de; Dütschke, E.; Patrao, C.; Hirzel, S.; Fong, J. | Conference Paper |
| 2010 | Energieeffizienzmaßnahmen. Die Industrie im Spannungsfeld zwischen Staat und Käufer
Neugebauer, Reimund; Rennau, A.; Schönherr, J.; Fischer, S.; Schellenberger, S. | Journal Article |
| 2010 | Energietechnologien 2050 - Schwerpunkte für Forschung und Entwicklung
: Wietschel, M.; Arens, M.; Dötsch, C.; Herkel, S.; Krewitt, W.; Markewitz, P.; Möst, D.; Scheufen, M. | Report |
| 2010 | Energietechnologien 2050. Politikbericht
: Wietschel, M.; Arens, M.; Dötsch, C.; Herkel, S.; Krewitt, W.; Markewitz, P.; Möst, D.; Scheufen, M. | Report |
| 2010 | The energy aware smart home
Jahn, M.; Jentsch, M.; Prause, C.R.; Pramudianto, F.; Al-Akkad, A.; Reiners, R. | Conference Paper |
| 2010 | Energy efficiency in manufacturing using the energy value stream method for building an energy-efficient factory
Erlach, Klaus | Conference Paper |
| 2010 | Industrie im Spannungsfeld zwischen Staat und Käufer
Neugebauer, Reimund; Schönherr, J.; Rennau, A. | Journal Article |
| 2010 | Know thyself: monitoring and reflecting energy consumption
Betz, M.; Schwartz, T.; Ramirez, L. | Presentation |
| 2010 | Monitoring and reflecting energy consumption
Betz, M.; Schwartz, T.; Ramirez, L. | Presentation |
| 2010 | Ultralow friction of reciprocating systems lubricated by mesogenic fluids
Amann, T.; Kailer, A. | Conference Paper |
| 2010 | Vision 2020: Future-proofing coating processes
Ondratschek, Dieter | Conference Paper |
| 2010 | VR-tools for the development of energy-efficient products
Neugebauer, Reimund; Wittstock, V.; Glänzel, J.; Paetzold, M.; Schumann, M.; Mayer, A. | Conference Paper |
| 2010 | Why don't households see the light? Explaining the diffusion of compact fluorescent lamps
Mills, B.F.; Schleich, J. | Journal Article |
| 2009 | Analyse des Energieverbrauchs und exemplarische Best-practice-Lösungen für relevante Verbrauchssektoren in Krankenhäusern
Beier, C. | Report |
| 2009 | Barriers to energy efficiency: A comparison across the German commercial and services sector
Schleich, J. | Journal Article |
| 2009 | Betriebserfahrungen mit Hochtemperatur-ORC-Anlagen als Nachschaltprozess an Verbrennungsmotoren
Grob, J.; Mieck, S.; Bülten, B.; Paucker, R.; Althaus, W. | Abstract |
| 2009 | The economics of climate change policies
Walz, R.; Schleich, J. | Book |
| 2009 | Effects of economies of scale and experience on the costs of energy-efficient technologies - case study of electric motors
Jardot, D.; Eichhammer, W.; Fleiter, T. | Conference Paper |
| 2009 | Gesamtwirtschaftliche Wirkungen von Energieeffizienzmaßnahmen in den Bereichen Gebäude, Unternehmen und Verkehr
Schade, W.; Lüllmann, A.; Beckmann, R.; Köhler, J. | Report |
| 2009 | Improving the database of electricity efficiency in tertiary buildings by monitoring and surveying
Gruber, E.; Schlomann, B. | Conference Paper |
| 2009 | Incentives for energy efficiency in the EU emissions trading scheme
Schleich, J.; Rogge, K.; Betz, R. | Journal Article |
| 2009 | Label it and they will buy? The case of energy efficient class-A appliances
Schleich, J.; Mills, B.F. | Conference Paper |
| 2009 | Smart Home: Zukünftige Kundenerwartungen / -anforderungen
Schliepkorte, H.-J. | Conference Paper |
| 2009 | Theoretische Betrachtungen zur idealen Netztemperatur
Dötsch, C.; Bargel, S. | Conference Paper |
| 2009 | Theoretische Betrachtungen zur idealen Temperatur in Fernwärmenetzen auf Grundlage einer exergetischen Bewertung
Dötsch, C.; Bargel, S. | Conference Paper |
| 2008 | Beyond case studies: Barriers to energy efficiency in commerce and the services sector
Schleich, J.; Gruber, E. | Journal Article |
| 2008 | Energieeffiziente Werkzeugmaschine - Ein Baustein für energieeffiziente Produktion
Neugebauer, Reimund; Blau, P.; Wabner, M. | Conference Paper |
| 2008 | Incentives for energy efficiency in the EU emissions trading scheme
Schleich, J.; Rogge, K.; Betz, R. | Report |
| 2008 | Ökologischer Vergleich der Klimarelevanz von PC und Thin Client Arbeitsplatzgeräten
: Knermann, C.; Hiebel, M.; Pflaum, H.; Rettweiler, M.; Schröder, A. | Study |
| 2008 | Optimierung des Walzprozesses hoher Laufverzahnungen
Neugebauer, Reimund; Hellfritzsch, U.; Lahl, M.; Schiller, S. | Conference Paper |
| 2008 | Research and technology competence for a sustainable development in the BRICS countries
Walz, R.; Ostertag, K.; Eichhammer, W.; Glienke, N.; Jappe-Heinze, A.; Mannsbart, W.; Peuckert, J. | Book |
| 2007 | Detailed analysis of electricity consumption in tertiary buildings as a basis for energy efficiency policies
Gruber, E.; Sofronis, I.; Dusée, R.; Plesser, S. | Conference Paper |
| 2007 | Determinants of structural change and innovation in the german steel industry - an empirical investigation
Schleich, J. | Journal Article |
| 2007 | EU emission trading - better job second time around?
Schleich, J.; Betz, R.; Rogge, K. | Conference Paper |
| 2007 | Integrating policies for renewables and energy efficiency: Comparing results from Germany, Luxembourg and Northern Ireland
Kranzl, Lukas; Brakhage, Anselm; Gürtler, Pedro; Pett, Jacky; Ragwitz, Mario; Stadler, Michael | Conference Paper |
| 2007 | Local learning networks on energy efficiency in industry - Successful initiative in Germany
Jochem, E.; Gruber, E. | Journal Article |
| 2007 | Using energy and materials more efficiently: Large and profitable potentials, but little attention from energy and climate policy
Jochem, E. | Journal Article |
| 2006 | Deriving efficient policy portfolios promoting sustainable energy systems - case studies applying invert simulation tool
Kranzl, L.; Stadler, M.; Huber, C.; Haas, R.; Ragwitz, M.; Brakhage, A.; Gula, A.; Figorski, A. | Journal Article |
| 2006 | Reshaping markets for the benefit of energy saving
Perrels, A.; Ostertag, K.; Henderson, G. | Journal Article |
| 2005 | Entwicklung und Optimierung von Einspartechnologien für industrielle Wärmeanwendungen durch Einsatz von sauerstoffangereicherter Luft
Backhaus, C.; Werneke, H. | Report |
| 2005 | Incentives for energy efficiency and innovation in the european emission trading system
Schleich, J.; Betz, R. | Conference Paper |
| 2004 | Compressed air system audits and benchmarking
Radgen, P. | Conference Paper |
| 2004 | A systematic approach of thinking globally and acting locally - energy efficiency in industry beyond traditional business economies
Jochem, E.; Gruber, E. | Conference Paper |
| 2003 | Barriers to energy efficiency - an econometric analysis of determinants
Gruber, E.; Schleich, J. | Conference Paper |
| 2003 | Efficient compressed air - a successful campaign for energy efficient compressed air systems in Germany
Agricola, A.-C.; Radgen, P. | Conference Paper |
| 2003 | Gestion de la demande d'Ênergie dans le cadre des efforts a accomplir par la belgique pour rêduire ses Êmissions de gaz a effet de serre
Eichhammer, W. | Report |
| 2003 | Machbarkeitsstudie zur Übertragung der deutschen Energiesparkampagne "Druckluft effizient" in die Schweiz
Radgen, P.; Gioor, R. | Book |
| 2003 | Simulating emissions trading in southwest Germany
Schleich, J.; Betz, R.; Ehrhart, K.-M.; Hoppe, C.; Seifert, S. | Conference Paper |
| 2002 | How to achieve market transformation for efficient fan systems in buildings
Radgen, P. | Conference Paper |
| 2000 | Impacts of energy efficiency on employment, growth and trade
Schleich, J.; Jochem, E. | Presentation |
| 2000 | International Network Non-energy Use and CO2 Emissions (NEU-CO2). Final Report of the First Phase of the Network (January 1999-June 2000)
Patel, M.; Gielen, D.; Kilde, N.; Simmons, T. | Report |
| 1999 | Energieeffizienz, Strukturwandel und Produktionsentwicklung der deutschen Industrie
Jochem, E.; Bradke, H. | Book Article |
| 1998 | Erfolgreiche Beispiele für die Überwindung von Hemmnissen der rationellen Energieanwendung in Industrie und Kleinverbrauch
Ostertag, K.; Böde, U.; Gruber, E.; Radgen, P. | Book |
| 1997 | From Primary to Final Energy Consumption - Analysing Structural and Efficiency Changes on the Energy Supply Side
Landwehr, M.; Jochem, E. | Journal Article |
| 1997 | Indicators for a European Cross-Country Comparison of Energy Efficiency in the Manufacturing Industry
Eichhammer, W.; Mannsbart, W. | Journal Article |
| 1997 | Interdisziplinäre Analyse der Umsetzungschancen einer Energiespar- und Klimaschutzpolitik
Jochem, E.; Ostertag, K.; Gruber, E.; Prose, F.; Homburg, A.; Hübner, G.; Hennicke, P.; Schulz, S. | Study |
| 1995 | Die Effizienz der photobiologischen Energiekonversion auf unterschiedlichen Systemebenen. Die potentielle H2-Produktion durch photoautotrophe Pflanzen und Konsequenzen für die globalen CO2- und O2-Kreisläufe
Rank, B.; Hoffmann, P.; Wiedenroth, E.-M. | Book |
| 1994 | Klimaverträgliche Energieversorgung in Baden-Württemberg. Phase 1: Industrie und prozeßenergieintensive Branchen des Kleinverbrauchssektors
Jochem, E.; Bradke, H.; Mannsbart, W.; Oetjen, H. | Book |
| 1994 | Potentiale und Kosten der Treibhausgasminderung im Industrie- und Kleinverbrauchsbereich
Bradke, H. | Report |
| 1991 | Energieeinsparpotentiale in den westdeutschen Ländern
Walz, R. | Conference Paper |
| 1991 | Energieeinsparpotentiale in den westdeutschen Ländern
Walz, R. | Journal Article |
| 1991 | Energy policy in the Federal Republic of Germany -West Germany-
Gruber, E.; Mannsbart, W.; Jochem, E. | Journal Article |
| 1991 | How Germany proceeds to reach its 25-30% Co2-reduction target (compared to 1987) in 2005
Walz, R. | Report |
| 1991 | Long-term potentials of rational energy use - the unkown possibilities reducing greenhouse gas emissions
Jochem, E. | Journal Article |
| 1991 | Programmstudie Rationelle Energieverwendung in Industrie und Kleinverbrauch. Tl.III. Verbundforschung als FuE-Instrument in mittelständischen Branchen in Industrie und Handwerk
Hillenbrand, T.; Morovic, T.; Toussaint, D.; Jochem, E. | Book |
| 1991 | Programmstudie Rationelle Energieverwendung in Industrie und Kleinverbrauch. Tl.IV. Erfolge und Zukunftschancen
Jochem, Eberhard; Mannsbart, Wilhelm; Nickel, Kurt; Schlomann, Barbara; Treber, Manfred | Book |
| 1991 | Programmstudie Rationelle Energieverwendung in Industrie und Kleinverbrauch. Zusammenfassung der Berichte I bis IV
Jochem, E.; Hammer, K.; Hillenbrand, T.; Jaeckel, G.; Mannsbart, W.; Morovic, T.; Pilhar, R.; Schlomann, B.; Toussaint, D.; Treber, M. | Report |
| 1989 | How to realize economic potentials for reducing greenhouse gases - the role of technology-specific programmes in energy efficiency
Jochem, E. | Conference Paper |