Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2018Deep learning-based face recognition and the robustness to perspective distortion
Damer, Naser; Wainakh, Yaza; Henniger, Olaf; Croll, Christian; Berthe, Benoit; Braun, Andreas; Kuijper, Arjan
Conference Paper
2018Face verification robustness & camera-subject distance
Berthe, Benoit; Croll, Christian; Henniger, Olaf
Journal Article
2016Automatic Calibration of Substitute Mechanical Loads Using the Example of Joining Distortion
Ackert, Patrick; Schwarz, Christian
Journal Article
2015Improving the ramp-up process of a body-construction line by numerical supported design of clamping devices and FEM based tolerance prognosis
Landgrebe, Dirk; Ackert, Patrick; Grützner, Raik; Weber, Johannes; Mauermann, Reinhard; Tegtmeier, André
Conference Paper
2014Less residual stresses in laser beam melting through a holistic approach including laser, scanning, material and machine parameters
Müller, Bernhard; Töppel, Thomas; Kranz, Burkhard; Hoeren, Karlheinz P.J.; Grimm, Tobias; Witt, Gerd
Conference Paper
2013A camera-based calibration for automotive augmented reality Head-Up-Displays
Wientapper, Folker; Wuest, Harald; Rojtberg, Pavel; Fellner, Dieter W.
Conference Paper
2013Clinching in steel and railway construction, shipbuilding and commercial vehicles
Neugebauer, Reimund; Voelkner, Wolfgang; Mauermann, Reinhard; Israel, Markus
Journal Article
2013Improving surface based clamping simulations by measuring the position of active surfaces during the clamping process
Drossel, Welf-Guntram; Schützle, Wilhelm; Ackert, Patrick; Wahl, Martin; Schulz, Frank; Mauermann, Reinhard
Conference Paper
2013Local-global approach using experimental and/or simulated data to predict distortion caused by mechanical joining technologies
Eckert, Alexander; Israel, Markus; Neugebauer, Reimund; Rösinger, Markus; Wahl, Martin; Schulz, F.
Journal Article
2013Predicting dimensional accuracy of laser welded aluminum add-on body parts
Neugebauer, Reimund; Wahl, Martin; Schulz, Frank; Schützle, Wilhelm; Werner, Stephan; Bernhardi, Otto Ernst; Mauermann, Reinhard
Conference Paper
2012Clinching in steel and railway construction, shipbuilding and commercial vehicles
Neugebauer, Reimund; Voelkner, Wolfgang; Mauermann, Reinhard; Israel, Markus
Conference Paper
2012Effect of heat source configuration on the result quality of numerical calculation of welding-induced distortion
Heinze, C.; Schwenk, C.; Rethmeier, M.
Journal Article
2012Residual stress calculations and measurements
Wohlfahrt, H.; Nitschke-Pagel, T.; Dilger, K.; Siegele, D.; Brand, M.; Sakkiettibutra, J.; Loose, T.
Journal Article
2011Application limits of a method to predict distortion caused by mechanical joining technologies in car body construction
Neugebauer, Reimund; Rössinger, Markus; Wahl, Martin; Schulz, F.; Hofmann, A.; Eckert, Alexander; Hecht, Benjamin
Conference Paper
2011Approach to assess a fast welding simulation in an industrial environment - application for an automotive welded part
Perret, W.; Thater, R.; Alber, U.; Schwenk, C.; Rethmeier, M.
Journal Article
2011Case study for welding simulation in the automotive industry
Perret, W.; Thater, R.; Alber, U.; Schwenk, C.; Rethmeier, M.
Journal Article
2011Konsistente Parametrisierung von Flächen vom Geschlecht 1 zur Bildung eines statistischen Formmodells des Wirbels
Becker, Meike; Kirschner, Matthias; Wesarg, Stefan
Conference Paper
2011Predicting dimensional accuracy of mechanical joined car body assemblies
Neugebauer, Reimund; Rössinger, M.; Wahl, M.; Schulz, F.; Eckert, A.; Schützle, W.
Conference Paper
2010Industrial application of welding temperature field and distortion visualization using FEA
Thater, R.; Perret, W.; Schwenk, C.; Alber, U.; Rethmeier, M.
Conference Paper
2010Parametrisierung und Rekonstruktion einer Fläche vom Geschlecht 1 im Rahmen der Segmentierung mit statistischen Formmodellen
Becker, Meike
: Kirschner, Matthias (Betreuer)
Master Thesis
2010Principles of shape from specular reflection. Rreview
Balzer, J.; Werling, S.
Journal Article
2008Measuring the spatiotemporal electric field of tightly focused ultrashort pulses with sub-micron spatial resolution
Bowlan, P.; Fuchs, U.; Gabolde, P.; Trebino, R.; Zeitner, U.D.
Journal Article
2007Welding simulation of aluminum automotive construction using SYSWELD simulation solution
Brand, M.; Siegele, D.
Journal Article
2007Zweidimensionale Merkmale zur Identifikation von Musiknoten anhand des Notensatzes
Becker, Sonja
: Schmucker, Martin (Betreuer)
Thesis
2006Radargrammetric extraction of building features from high-resolution multi-aspect SAR data
Sörgel, U.; Michaelsen, E.; Thiele, A.; Thönnessen, U.
Conference Paper
2006Simulation of welded aluminium automotive components
Veneziano, C.; Brand, M.; Pfeiffer, W.; Siegele, D.; Gumbsch, P.
Journal Article
2002Intercept point behavior of Ka-Band GaAs high power amplifiers
Merkle, T.; Tessmann, A.; Ramberger, S.
Conference Paper
1997Distortion Correction of Magnetic Fields for Position Tracking
Zachmann, G.
Conference Paper
1996Inverse hardness distribution and its influence on mechanical properties
Liscic, B.; Grubisic, V.; Totten, G.E.
Conference Paper
1993Influences of statistical phase distortions of active medium on laser performances
Du, K.
Journal Article
1991Optical quality of a combined aerodynamic window
Franek, J.; Zefferer, H.; Du, K.
Conference Paper
1990A constitutive model for the finite-element simulation of sintering - distortions and internal stresses.
Riedel, H.
Conference Paper